longer disagree on how big pointers are.
* findvar.c (value_from_register): Remove special case code for D10V.
* printcmd.c (print_frame_args): Same.
* valops.c (value_at, value_fetch_lazy): Same.
* values.c (unpack_long): Same.
* gdbarch.sh: Changes to effect the following:
* gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
gdbarch_d10v_convert_daddr_to_raw_ftype,
gdbarch_d10v_convert_daddr_to_raw,
set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
gdbarch_d10v_convert_iaddr_to_raw_ftype,
gdbarch_d10v_convert_iaddr_to_raw,
set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
* gdbarch.c: Delete the corresponding definitions.
(struct gdbarch): Delete members d10v_make_daddr,
d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
(startup_gdbarch): Remove initializers for the above.
(verify_gdbarch, gdbarch_dump): Don't verify or dump them any
more.
* d10v-tdep.c (d10v_register_virtual_type): Rather that
claiming the stack pointer and PC are 32 bits long (which they
aren't), say that the stack pointer is an int16_t, and the
program counter is a function pointer. This allows the rest
of GDB to make the appropriate conversions between the code
pointer format and real addresses.
(d10v_register_convertible, d10v_register_convert_to_virtual,
d10v_register_convert_to_raw): Delete function; no registers
are convertible now, so we use
generic_register_convertible_not instead.
(d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
methods.
(d10v_push_arguments, d10v_extract_return_value): Remove special
cases for code and data pointers.
(d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
the target agree on how large pointers are. Say that addresses
are 32 bits long. Register the address_to_pointer and
pointer_to_address conversion functions. Since no registers are
convertible now, register generic_register_convertible_not as the
gdbarch_register_convertible method instead of
d10v_register_convertible. Remove registrations for
d10v_register_convert_to_virtual,
d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
gdbarch_d10v_convert_iaddr_to_raw.
(EXTRACT_STRUCT_VALUE_ADDRESS): Change to a function with
predicate.
* gdbarch.h, gdbarch.c: Regenerate.
* values.c (value_being_returned): Change the reference to
EXTRACT_STRUCT_VALUE_ADDRESS_P to a function call.
Changes by Jim Ingham:
* values.c (value_change_enclosing_type): New function. If the
new enclosing type is larger than the old one, we need to allocate
more space.
* value.h: Add value_change_enclosing_type prototype.
* valops.c (value_cast): Use it.
(value_assign): Use it.
(value_addr): Use it.
(value_ind): Use it.
(value_full_object): Use it.
2001-05-07 Daniel Berlin <dan@cgsoftware.com>
* values.c (value_static_field): Handle static fields that have a constant value.
Abstract out operations specific to particular C++ ABI's, and
invoke them through a function table. This removes the C++ ABI
dependencies scattered throughout the code, and allows us to
cleanly add support for new C++ ABI's.
* cp-abi.h, cp-abi.h, gnu-v2-abi.c, hpacc-abi.c: New files.
* c-typeprint.c, c-valprint.c, dbxread.c, eval.c, gdbtypes.c,
jv-typeprint.c, linespec.c, symtab.c, typeprint.c, valops.c:
#include "cp-abi.h". These files all use functions now declared
there.
* symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P):
Deleted. These services are now provided by functions declared in
cp-abi.h.
* value.h (value_rtti_type, value_virtual_fn_field): Same.
* values.c (value_virtual_fn_field): Same, for this definition.
* valops.c (value_rtti_type): Same.
* c-typeprint.c (c_type_print_base): Use the functions from
"cp-abi.h", instead of the old macros, or hard-coded ABI-specific
tests.
* dbxread.c (record_minimal_symbol): Same.
* gdbtypes.c (get_destructor_fn_field, virtual_base_index,
virtual_base_index_skip_primaries): Same.
* jv-typeprint.c (java_type_print_base): Same.
* linespec.c (find_methods, decode_line_1): Same.
* symtab.c (gdb_mangle_name): Same.
* Makefile.in (SFILES): Add the new .c files mentioned above.
(cp_abi_h): New variable.
(COMMON_OBS): Add gnu-v2-abi.o, hpacc-abi.o, and cp-abi.o.
(cp-abi.o, gnu-v2-abi.o, hpacc-abi.o): New targets.
(c-typeprint.o, c-valprint.o, dbxread.o, eval.o, gdbtypes.o,
jv-typeprint.o, symtab.o, linespec.o, typeprint.o, valops.o): Add
dependency on $(cp_abi_h).
* values.c (value_primitive_field): Copy VALUE_REGNO as well.
With typed registers we may have the location information in this field,
in addition to VALUE_ADDRESS (which was already being copied).
functions which architectures can redefine, defaulting to
generic_pointer_to_address and generic_address_to_pointer.
* findvar.c (extract_typed_address, store_typed_address,
generic_pointer_to_address, generic_address_to_pointer): New
functions.
(POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default
definitions.
(extract_address, store_address): Doc fixes.
* values.c (value_as_pointer): Doc fix.
(value_from_pointer): New function.
* defs.h (extract_typed_address, store_typed_address): New
declarations.
* inferior.h (generic_address_to_pointer,
generic_pointer_to_address): New declarations.
* value.h (value_from_pointer): New declaration.
* ax-gdb.c (const_var_ref): Use value_from_pointer, not
value_from_longest.
* blockframe.c (generic_push_dummy_frame): Use read_pc and
read_sp, not read_register.
* c-valprint.c (c_val_print): Use extract_typed_address instead of
extract_address to extract vtable entries and references.
* cp-valprint.c (cp_print_value_fields): Use value_from_pointer
instead of value_from_longest to extract the vtable's address.
* eval.c (evaluate_subexp_standard): Use value_from_pointer
instead of value_from_longest to compute `this', and for doing
pointer-to-member dereferencing.
* findvar.c (read_register): Use extract_unsigned_integer, not
extract_address.
(read_var_value): Use store_typed_address instead of store_address
for building label values.
(locate_var_value): Use value_from_pointer instead of
value_from_longest.
* hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer,
instead of value_from_longest, to build arguments to __d_shl_get.
* printcmd.c (set_next_address): Use value_from_pointer, not
value_from_longest.
(x_command): Use value_from_pointer, not value_from_longest.
* tracepoint.c (set_traceframe_context): Use value_from_pointer,
not value_from_longest.
* valarith.c (value_add, value_sub): Use value_from_pointer, not
value_from_longest.
* valops.c (find_function_in_inferior, value_coerce_array,
value_coerce_function, value_addr, hand_function_call): Same.
* value.h (COERCE_REF): Use unpack_pointer, not unpack_long.
* values.c (unpack_long): Use extract_typed_address to produce
addresses from pointers and references, not extract_address.
(value_from_longest): Use store_typed_address instead of
store_address to produce pointer and reference values.
* breakpoint.c (insert_breakpoints, remove_breakpoint)
(bpstat_stop_status, can_use_hardware_watchpoint): Don't insert,
remove, or check status of hardware watchpoints for entire structs
and arrays unless the user explicitly asked to watch that struct
or array.
(insert_breakpoints): Try to insert watchpoints for all the values
on the value chain, even if some of them fail to insert.
* values.c (value_primitive_field): Set the offset in struct value
we return when the field is a packed bitfield.
* defs.h: Move _initialize_printcmd, _initialize_stack,
_initialize_blockframe out of here and in to their respective .c files.
* blockframe.c: Move _initialize_blockframe prototype to here.
* printcmd.c: Move _initialize_printcmd prototype to here.
* stack.c: Move _initialize_stack prototype to here.
* source.c, symtab.h: Move _initialize_source prototype to the .c file.
* values.c, value.h: Move _initialize_values prototype to the .c file.
* gdbthread.h, thread.c: Move _initialize_thread prototype to the .c
file.
* breakpoint.c, breakpoint.h: Move _initialize_breakpoint prototype
to the .c file.
* abug-rom.c alpha-nat.c alpha-tdep.c annotate.c ax-gdb.c bcache.c:
Standardize comments for the prototype section of these files.
* configure.in: Look in libc for wctype before looking for it in libc.
The last one is to fix the GNU ld (~2.9.1) + Solaris 2.6 interaction problem
where an empty stub library (libw) causes a core dump when we call vasprintf
(e.g. `info br') in the final linked gdb.
Wed Jun 10 18:04:35 1998 Frank Ch. Eigler <fche@cygnus.com>
* gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for
all-positive enum.
(create_set_type): Ditto for all-positive set values.
* values.c (unpack_field_as_long): Check for typedef in struct
field unpacking.
* coffread.c (decode_base_type): Treat a long field with size greater
than TARGET_LONG_BIT as long long.
* values.c (value_from_longest): Print code value in error message.
(TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp.
(TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp.
(d10v_write_fp, d10v_read_fp): Add prototypes.
* symtab.c (decode_line_1): Remove assignment of sals[0].pc field.
* symfile.c (simple_overlay_update, simple_overlay_update_1):
Ignore the size of overlay sections. This check is redundant anyway.
* printcmd.c (print_frame_args): Ditto.
* valops.c (value_fetch_lazy): Ditto.
* values.c (unpack_long): Ditto.
* d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs,
d10v_init_extra_frame_info): Fix some minor bugs so the finish command
works properly.
(show_regs): Change num1 and num2 types from "long long" to "LONGEST".
(d10v_read_fp, d10v_write_fp): New functions.
(d10v_push_arguments): Remove unneeded assigns to "val" and "contents".
(d10v_push_arguments): Fix for pointers and structs.
(d10v_extract_return_value): Fix for pointers and chars.
Add a bunch of macros.
* coffread.c, dwarf2read.c, dwarfread.c, mdebugread.c, stabsread.c:
Update to use new macros.
* coffread.c, hpread.c, stabsread.c: Remove bugus TYPE_FIELD_VALUE.
* value.h, values.c (value_static_field): New function.
* cp-valprint.c, valops.c: Modify to use value_static_field.
ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
and CONFIG_OBS.
* configure configure.in: Clean up test cases around thread support.
start-sanitize-v850
* configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
host is Windows.
end-sanitize-v850
* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
printcmd.c valops.c value.h values.c: Add bfd_section arg to
value_at and value_at_lazy.
* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
Add bfd_section arg to prim_record_minimal_symbol_and_info.
* corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
instead of read_memory. It takes a bfd_section arg.
* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
unnecessary cast for assignment of struct dbx_symfile_info.
Struct objfile now uses a real pointer instead of PTR for this
element.
* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
text, data and bss into dbx_symfile_info.
* exec.c (xfer_memory): Handle transfers for user-specified
sections.
* findvar.c (read_var_value locate_var_value): Copy bfd section
from the symbol to the value.
* gdb-stabs.h: Add section pointers for text, data and bss
sections.
* maint.c (translate address command): Add test code for overlay
address translation.
* printcmd.c (do_examine do_one_display): Now takes a bfd section
arg.
* (print_formatted x_command): Record current section along with
current address for repeated commands.
* sparc-nat.c (fetch_inferior_registers): Change
target_xfer_memory to target_{read write}_memory to allow changes
to target_xfer_memory interface for section info.
* symmisc.c (dump_msymbols print_symbol): Print section
assocaited with symbol.
* symtab.c (fixup_symbol_section): New routine to
add section info to symbols returned by lookup_symbol.
* symtab.h (struct general_symbol_info): Add bfd section to
symbols.
* target.c target.h (target_xfer_memory): Add bfd section to
args.
* (target_read_memory_section): New routine to read data from a
specific section.
* (target_memory_bfd_section): New global variable to pass bfd
section in to targets.
* valarith.c (value_add value_addr value_array): Preserve bfd
section when computing new value.
* value.h (struct value): Add bfd section to values.
* values.c (allocate_value value_copy): Initialize/preserve bfd
section.
* (unpack_double): Clean up _MSC_VER conditionals to remove
duplicate code.
start-sanitize-v850
* v850ice.c: New module to support communication with NEC's
PC-based ICE.
* config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
ep names with rxx names. sp and fp are renamed via a different
mechanism.
end-sanitize-v850
* infcmd.c (do_registers_info): Call val_print with the
virtual buf instead of the raw buf. Needed for REGISTER_CONVERT
to work with non-floating point regs.
start-sanitize-d10v
* d10v-tdep.c (d10v_skip_prologue): If we have line debugging
information, then the end of the prologue should the first
assembly instruction of the first source line.
* values.c (value_from_longest): Put in D10V call to
fix up address pointers.
* config/d10v/tm-d10v.h (REGISTER_VIRTUAL_SIZE): Modified.
(REGISTER_VIRTUAL_TYPE): Modified for PC_REGNUM and SP_REGNUM.
(REGISTER_CONVERTIBLE): Make PC and SP convertible.
(REGISTER_CONVERT_TO_VIRTUAL): Define.
(REGISTER_CONVERT_TO_RAW): Define.
(D10V_MAKE_DADDR): Define.
(D10V_MAKE_IADDR): Define.
end-sanitize-d10v