Commit Graph

5 Commits

Author SHA1 Message Date
Alan Modra a288c27099 PR24511, nm should not mark symbols in .init_array as "t"
This patch restricts the section names matched in coff_section_type,
a function that translates section names to symbol type, and arranges
to translate section flags to symbol type before looking at names.
The latter change resulted in various test failures due to improper
section flags being used in tests, and by the plugin support, so fix
that too.

The new test fails on many ELF targets that lack .init/fini_array
in their scripts.  I've just xfailed those.  pru-elf oddly defines
__init_array_begin rather than __init_array_start.  I've left that
target as a FAIL, and pj-elf too which reports an error for undefined
weak symbols.

bfd/
	PR 24511
	* syms.c (coff_section_type): Only allow '.', '$' and numeric
	following the standard section names.
	(bfd_decode_symclass): Prioritize section flag tests in
	decode_section_type before name tests in coff_section_type.
	* plugin.c (bfd_plugin_canonicalize_symtab): Init fake_section
	and fake_common_section using BFD_FAKE_SECTION.  Use "fake" as
	their names and choose standard .text section flags for
	fake_section.
ld/
	PR 24511
	* testsuite/ld-elf/pr14156a.d: Allow for .init/.fini being a
	data section on hppa64.
	* testsuite/ld-elf/pr14156b.d: Likewise.
	* testsuite/ld-scripts/pr18963.t: Map standard sections to set
	output section flags.
	* testsuite/ld-scripts/sane1.t: Likewise.
	* testsuite/ld-elf/init-fini-arrays.s: Reference __init_array_start
	and __fini_array_start.  Define __start et al.
	* testsuite/ld-elf/pr24511.d: New test.
2019-05-04 16:57:33 +09:30
Alan Modra f84bd4655c Adjust pr14156 test for m68hc1*
The test section alignment is unnecessarily high, overflowing the
m68hc11 page used by .init code.

	* testsuite/ld-elf/fini2.s: Reduce alignment.
	* testsuite/ld-elf/fini3.s: Likewise.
	* testsuite/ld-elf/finin.s: Likewise.
	* testsuite/ld-elf/init2.s: Likewise.
	* testsuite/ld-elf/init3.s: Likewise.
	* testsuite/ld-elf/initn.s: Likewise.
	* testsuite/ld-elf/pr14156a.d: Don't xfail m68hc1*-* or xgate-*.
	* testsuite/ld-elf/pr14156b.d: Don't xfail xgate-*.
2019-03-21 22:19:51 +10:30
Alan Modra bdd32e03c5 is_underscore_target for ld-elf tests
and correct targ_underscore in config.bfd

bfd/
	* config.bfd: Correct targ_underscore for epiphany, ip2k,
	m32c, mn10200, pru, rl78, rx, crisv32 and v850.
ld/
	* testsuite/lib/ld-lib.exp (is_underscore_target): New.
	* testsuite/ld-elf/elf.exp (ASFLAGS): Define UNDERSCORE.
	* testsuite/ld-elf/pr21562a.s: If UNDERSCORE defined,
	reference sym with prefix.
	* testsuite/ld-elf/pr21562b.s: Likewise.
	* testsuite/ld-elf/sizeof.s: Likewise.
	* testsuite/ld-elf/startof.s: Likewise.
	* testsuite/ld-elf/pr14156a.d: Adjust for extra symbols.
	* testsuite/ld-elf/pr21562a.d: Remove underscore target from
	xfails, and match prefixed symbol.
	* testsuite/ld-elf/pr21562b.d: Likewise.
	* testsuite/ld-elf/pr21562c.d: Likewise.
	* testsuite/ld-elf/pr21562d.d: Likewise.
	* testsuite/ld-elf/pr21562e.d: Likewise.
	* testsuite/ld-elf/pr21562f.d: Likewise.
	* testsuite/ld-elf/pr21562g.d: Likewise.
	* testsuite/ld-elf/pr21562h.d: Likewise.
	* testsuite/ld-elf/pr21562i.d: Likewise.
	* testsuite/ld-elf/pr21562j.d: Likewise.
	* testsuite/ld-elf/pr21562k.d: Likewise.
	* testsuite/ld-elf/pr21562l.d: Likewise.
	* testsuite/ld-elf/pr21562m.d: Likewise.
	* testsuite/ld-elf/pr21562n.d: Likewise.
	* testsuite/ld-elf/sizeofa.d: Likewise.
	* testsuite/ld-elf/sizeofb.d: Likewise.
	* testsuite/ld-elf/sizeofc.d: Likewise.
	* testsuite/ld-elf/startofa.d: Likewise.
	* testsuite/ld-elf/startofb.d: Likewise.
	* testsuite/ld-elf/startofc.d: Likewise.
2017-06-18 11:56:19 +09:30
Alan Modra b3066ae825 m68hc11/12 and xgate config.sub weirdness
Oddly, config.sub converts a duple ending in -elf for these target to
-unknown-none, which means they aren't seen as elf targets by
binutils.  So, counter that.  This exposes a number of testsuite
issues (ones you would have seen if configuring with a full triple,
say m68hc11-unknown-elf).

binutils/
	* testsuite/lib/binutils-common.exp (is_elf_format): Return true
	for m68hc11/12 and xgate triples.
gas/
	* testsuite/gas/cfi/cfi.exp: Exclude m68hc11/12 from m68k test.
ld/
	* testsuite/lib/ld-lib.exp (check_shared_lib_support): Exclude xgate.
	* testsuite/ld-elf/endsym.d: xfail m68hc11/12 and xgate.
	* testsuite/ld-elf/pr14156a.d: Likewise.
	* testsuite/ld-elf/pr14926.d: Don't run for m68hc11/12 and xgate.
	* testsuite/ld-elf/sec64k.exp: Likewise.
2016-01-17 12:13:43 +10:30
H.J. Lu eda680f805 Add SORT_NONE and don't sort sort .init/.fini sections
ld/

	PR ld/14156
	* NEWS: Mention SORT_NONE.

	* ld.h (sort_type): Add by_none.

	* ld.texinfo: Document SORT_NONE.

	* ldgram.y: Handle SORT_NONE.

	* ldlang.c (update_wild_statements): Handle by_none.  Don't
	sort .init/.fini sections.

	* ldlex.l: Add SORT_NONE.

ld/testsuite/

	PR ld/14156
	* ld-elf/fini0.s: New file.
	* ld-elf/fini1.s: Likewise.
	* ld-elf/fini2.s: Likewise.
	* ld-elf/fini3.s: Likewise.
	* ld-elf/finin.s: Likewise.
	* ld-elf/foo0.s: Likewise.
	* ld-elf/foo1.s: Likewise.
	* ld-elf/foo2.s: Likewise.
	* ld-elf/foo3.s: Likewise.
	* ld-elf/foon.s: Likewise.
	* ld-elf/init0.s: Likewise.
	* ld-elf/init1.s: Likewise.
	* ld-elf/init2.s: Likewise.
	* ld-elf/init3.s: Likewise.
	* ld-elf/initn.s: Likewise.
	* ld-elf/pr14156a.d: Likewise.
	* ld-elf/pr14156b.d: Likewise.
	* ld-elf/pr14156c.d: Likewise.
	* ld-elf/pr14156c.t: Likewise.
2012-07-10 06:50:57 +00:00