is_hardware_watchpoint.
(watchpoints_triggered): Ditto.
(bpstat_check_location): Use is_watchpoint and
is_hardware_watchpoint.
(bpstat_check_watchpoint): Use is_watchpoint and
is_hardware_watchpoint.
(bpstat_stop_status): Fix comment.
(user_settable_breakpoint): Use is_watchpoint.
(hw_watchpoint_used_count): Use is_hardware_watchpoint.
(disable_watchpoints_before_interactive_call_start): Use
is_watchpoint.
(enable_watchpoints_after_interactive_call_stop): Use
is_watchpoint.
(clear_command): Use is_watchpoint.
(do_enable_breakpoint): Use is_watchpoint.
The recent change to reload_shared_libraries() broke FDPIC shared libraries as
the solib-frv.c code was implicitly relying on the initial order of calls
(first solib_addr() and then solib_create_inferior_hook()). It was
maintaining internal state via enable_break{1,2}_done to handle this.
While I could tweak these values a bit more, the original code wasn't terribly
bullet proof -- if during the initial debug you attempted to view shared
libraries, the enable2_break() code would whine about the ldso internal debug
addresses being unfetchable (and would actually attempt to read address 0x8 on
the target). So I've dropped this implicit dependency on order (i.e.
enable_break1_done) and updated the ldso poking code (i.e. enable_break2) to
silently return when the internal debug address is still set to 0. It will
remain this way until the ldso gets a chance to initialize at which point the
code will act the same as before.
While I have no way of testing the FRV, the Blackfin FDPIC code is using this
same base in a 100% copy & paste method since we implemented FDPIC the same
way as the FRV guys (I'll address this in the future). This fix was required
in order to handle shared libraries with Blackfin FDPIC properly, and I see no
reason why it wouldn't also work for FRV (since the uClibc ldso FDPIC code is
the same too and that's really what this is poking).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
instead of an error if no PLT entry is found. Return a
potentially useful result.
(m32c_m16c_pointer_to_address): Add code to search for function
address when no .plt entry is found.
* NEWS: Document new feature.
* remote.c (PACKET_qGetTIBAddr): New enum element.
(remote_get_tib_address): New function.
(init_remote_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_remote): Add add_packet_config_cmd
for PACKET_qGetTIBAddr.
* target.c (update_current_target): Set default value for
new to_get_tib_address field.
* target.h (target_ops): New field to_get_tib_address.
(target_get_tib_address): New macro.
* windows-nat.c (thread_info): Add thread_local_base field.
(windows_add_thread): Add tlb argument of type 'void *'.
(fake_create_process): Adapt windows_add_thread call.
(get_windows_debug_event): Idem.
(windows_get_tib_address): New function.
(init_windows_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_windows_nat): Replace info_w32_cmdlist
initialization by a call to init_w32_command_list.
(info_w32_command, info_w32_cmdlist): Removed from here...
to windows-tdep.c file.
* windows-tdep.h (info_w32_cmdlist): Declare.
(init_w32_command_list): New external function
declaration.
* windows-tdep.c: Add several headers.
(info_w32_cmdlist): to here, made global.
(thread_information_32): New struct.
(thread_information_64): New struct.
(TIB_NAME): New char array.
(MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants.
(maint_display_all_tib): New static variable.
(windows_get_tlb_type): New function.
(tlb_value_read, tlb_value_write): New functions.
(tlb_value_funcs): New static struct.
(tlb_make_value): New function.
(display_one_tib): New function.
(display_tib): New function.
(show_maint_show_all_tib):New function.
(info_w32_command): Moved from windows-nat.c.
(init_w32_command_list): New function.
(_initialize_windows_tdep): New function.
New "maint set/show show-all-tib" command
New "$_tlb" internal variable.
gdbserver/ChangeLog entry:
* server.c (handle_query): Handle 'qGetTIBAddr' query.
* target.h (target_ops): New get_tib_address field.
* win32-low.h (win32_thread_info): Add thread_local_base field.
* win32-low.c (child_add_thread): Add tlb argument.
Set thread_local_base field to TLB.
(get_child_debug_event): Adapt to child_add_thread change.
(win32_get_tib_address): New function.
(win32_target_ops): Set get_tib_address field to
win32_get_tib_address.
* linux-low.c (linux_target_ops): Set get_tib_address field to NULL.
doc/ChangeLog entry:
gdb.texinfo ($_tlb): Document new automatic convinience variable.
(info w32 thread-information-block): Document new command.
(qGetTIBAddress): Document new gdbserver query.
(maint set/show show-all-tib): Document new command.
* frame.c: Include tracepoint.h.
(get_current_frame): Allow a trace frame to be an alternate source
of stack frame data.
* tracepoint.c (tfind_1): Don't try to get current stack frame if
it won't succeed.
* solib.c (free_so_symbols): New function, from ...
(free_so): ... here. Call it.
(solib_read_symbols): Don't warn here if symbols have already been
loaded.
(solib_add): Warn here instead, if a pattern was specified.
(reload_shared_libraries_1): New.
(reload_shared_libraries): Rewrite to not fetch the library list.
* solist.h (struct so_list): Remove from_tty.
* solib.c (solib_bfd_open): Return NULL if we failed to open a BFD.
(solib_map_sections): Take so_list argument. Return 0 if we
failed to open a BFD. Add target sections here.
(symbol_add_stub): Delete.
(solib_read_symbols): Inline symbol_add_stub. Use current flags,
not from_tty copied from the so_list. Don't warn a second time
for a missing library.
(update_solib_list): Don't save from_tty. Use TRY_CATCH. Do not
add to the section table here. Print out a single warning for all
missing libraries.
* bsd-uthread.c (bsd_uthread_solib_loaded): Always pass 0 for
flags.
PR python/11381
* python/py-prettyprint.c (pretty_print_one_value): Test for
Py_None.
(print_string_repr): Test for Py_None. Set flags accordingly.
Return value depending on return type.
(print_children): Take a value indicating whether data was printed
before this function was called. Alter output accordingly.
(apply_val_pretty_printer): Capture return value from
print_string_repr and pass to print_children.
2010-04-14 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-prettyprint.py (NoStringContainerPrinter): New printer.
* gdb.python/py-prettyprint.c: Add justchildren struct, typedefs.
* gdb.python/py-prettyprint.exp: New test for to_string returning None.
* gdb.python/py-mi.exp: New test for to_string returning None.
2010-04-14 Phil Muldoon <pmuldoon@redhat.com>
* gdb.texinfo (Pretty Printing): Document behaviour when to_string
returns None.
register note sections.
(i386_linux_sse_regset_sections, i386_linux_avx_regset_sections):
New variables.
(i386_linux_init_abi): Install list of supported register note
sections that matches the target description.
replies.
(remote_start_remote): Update and merge tracepoints and trace
state variables as long as the target supports tracepoints.
(remote_trace_init): Fix prototype.
(remote_download_trace_state_variable): Validate reply.
(remote_trace_set_readonly_regions): Fix prototype.
(remote_trace_start): Fix prototype. Check for empty reply.
(remote_get_trace_status): Small cleanup.
(remote_trace_stop): Fix prototype. Check for empty reply.
(remote_trace_find): Check for empty reply.
(remote_save_trace_data): Validate reply.
(remote_set_disconnected_tracing): Check for empty reply, and
validate reply.
(remote_set_circular_trace_buffer): Ditto.
The sim and m32r remote targets declare a local "file" variable and only
assign const strings to it before passing it to a printf() func. So add
const markings to avoid gcc warnings like:
gdb/remote-sim.c: In function 'gdbsim_files_info':
gdb/remote-sim.c:789: warning: initialization discards qualifiers
from pointer target type
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* arm-tdep.h (gdb_regnum): Add ARM_FPSCR_REGNUM
* arm-linux-nat.c (arm_linux_vfp_register_count): New
variable.
(fetch_vfp_registers): New function to fetch VFP registers.
(store_vfp_registers): New function to store VFP registers.
(arm_linux_fetch_inferior_registers): Add support for VFP
registers.
(arm_linux_store_inferior_registers): Likewise.
(arm_linux_read_description): Likewise.
(_initialize_arm_linux_nat): Delay initialising iWMMX tdesc
until we need it.
changing the register cache layout.
(regcache_invalidate_one): Allow a NULL regcache.
* linux-x86-low.c (x86_linux_update_xmltarget): Invalidate
regcaches before changing the register cache layout or the target
regsets.
* linux-low.c (linux_remove_process): Delete.
(add_lwp): Don't set last_resume_kind here.
(linux_kill): Use `mourn'.
(linux_detach): Use `thread_db_detach', and `mourn'.
(linux_mourn): New.
(linux_attach_lwp_1): Adjust comment.
(linux_attach): last_resume_kind moved the thread_info; adjust.
(status_pending_p_callback): Adjust.
(linux_wait_for_event_1): Adjust.
(count_events_callback, select_singlestep_lwp_callback)
(select_event_lwp_callback, cancel_breakpoints_callback)
(db_wants_lwp_stopped, linux_wait_1, need_step_over_p)
(proceed_one_lwp): Adjust.
(linux_async): Add debug output.
(linux_thread_stopped): New.
(linux_pause_all): New.
(linux_target_ops): Install linux_mourn, linux_thread_stopped and
linux_pause_all.
* linux-low.h (struct lwp_info): Delete last_resume_kind field.
(thread_db_free): Delete declaration.
(thread_db_detach, thread_db_mourn): Declare.
* thread-db.c (thread_db_init): Use thread_db_mourn.
(thread_db_free): Delete, split in two.
(disable_thread_event_reporting): New.
(thread_db_detach): New.
(thread_db_mourn): New.
* server.h (struct thread_info) <last_resume_kind>: New field.
<attached>: Add comment.
<gdb_detached>: New field.
(handler_func): Change return type to int.
(handle_serial_event, handle_target_event): Ditto.
(gdb_connected): Declare.
(tracing): Delete.
(disconnected_tracing): Declare.
(stop_tracing): Declare.
* server.c (handle_query) <qSupported>: Report support for
disconnected tracing.
(queue_stop_reply_callback): Account for running threads.
(gdb_wants_thread_stopped): New.
(gdb_wants_all_threads_stopped): New.
(gdb_reattached_process): New.
(handle_status): Clear the `gdb_detached' flag of all processes.
In all-stop, stop all threads.
(main): Be sure to leave tfind mode. Handle disconnected tracing.
(process_serial_event): If the remote connection breaks, or if an
exit was forced with "monitor exit", force an event loop exit.
Handle disconnected tracing on detach.
(handle_serial_event): Adjust.
(handle_target_event): If GDB isn't connected, forward events back
to the inferior, unless the last process exited, in which case,
exit gdbserver. Adjust interface.
* remote-utils.c (remote_open): Don't block in accept. Instead
register an event loop source on the listen socket file
descriptor. Refactor bits into ...
(listen_desc): ... this new global.
(gdb_connected): ... this new function.
(enable_async_notification): ... this new function.
(handle_accept_event): ... this new function.
(remote_close): Clear remote_desc.
* inferiors.c (add_thread): Set the new thread's last_resume_kind.
* target.h (struct target_ops) <mourn, thread_stopped, pause_all>:
New fields.
(mourn_inferior): Define.
(target_process_qsupported): Avoid the dangling else problem.
(thread_stopped): Define.
(pause_all): Define.
(target_waitstatus_to_string): Declare.
* target.c (target_waitstatus_to_string): New.
* tracepoint.c (tracing): Make extern.
(disconnected_tracing): New.
(stop_tracing): Make extern. Handle tracing stops due to GDB
disconnecting.
(cmd_qtdisconnected): New.
(cmd_qtstatus): Report disconnected tracing status in trace reply.
(handle_tracepoint_general_set): Handle QTDisconnected.
* event-loop.c (event_handler_func): Change return type to int.
(process_event): Bail out if the event handler wants the event
loop to stop.
(handle_file_event): Ditto.
(start_event_loop): Bail out if the event handler wants the event
loop to stop.
* nto-low.c (nto_target_ops): Adjust.
* spu-low.c (spu_wait): Don't remove the process here.
(spu_target_ops): Adjust.
* win32-low.c (win32_wait): Don't remove the process here.
(win32_target_ops): Adjust.
Pedro Alves <pedro@codesourcery.com>
* tracepoint.h (struct trace_status): New fields disconnected_tracing
and circular_buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing.
* tracepoint.c (trace_status_command): Display target's status for
disconnected tracing and circular buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing, add
query for non-disconnected-tracing case, remove the stop_tracing
call.
(tfile_open): Clear disconnected and circular buffer status.
(trace_save): Save disconnected and circular buffer status.
(parse_trace_status): Parse disconnected and circular buffer status,
also recognize disconnected as a stop reason.
* remote.c (remote_set_disconnected_tracing): Only set
QTDisconnected if the remote end supports disconnected tracing.
Warn otherwise, if trying to enable disconnected tracing.
* infcmd.c (detach_command): Update disconnect_tracing call.
* cli/cli-cmds.c (quit_command): Ditto.
* gdb.texinfo (Tracepoint Packets): Describe disconn and circular
trace status fields.
doc/
* gdb.texinfo (Command Files): Document that gdb skips $cdir in
search path, and document that gdb only scans the search path if
the script's path doesn't specify a directory.
PR python/11417
* python/py-lazy-string.c (stpy_convert_to_value): Check for
a NULL address.
(gdbpy_create_lazy_string_object): Allow strings with a NULL
address and a zero length.
2010-04-08 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-value: Add null string variable.
(test_lazy_string): Test zero length, NULL address lazy
strings.
and string constants.
* gdb/testsuite/gdb.stabs/aout.sed: Convert all backslash to double backslash
within one line, unless it is followed by a double quote.
* gdb/testsuite/gdb.stabs/hppa.sed: Idem.
* gdb/testsuite/gdb.stabs/weird.def: Add char and String constants
* gdb/testsuite/gdb.stabs/weird.exp: Check for correct parsing of
chhar and string constants.
* gdb/testsuite/gdb.stabs/xcoff.sed: Ignore escaped quote quotes
in .stabs to .stabx substitution.
* tracepoint.c: Include gdbcore.h.
(tfile_xfer_partial): Return partial results, also try reading
from executable.
(tfile_has_all_memory): New function.
(init_tfile_ops): Use it.
* gdb.trace/tfile.c: Add a variable split across two blocks, and a
constant global.
* gdb.trace/tfile.exp: Try to print them.
PR gdb/10736:
* xml-syscall.c (my_gdb_datadir): New variable to keep track of
the changes in data-directory.
(init_sysinfo): Reload the syscall XML file if the data-directory
has changed.
Nathan Sidwell <nathan@codesourcery.com>
* breakpoint.c (breakpoint_1): Add filter argument, return number of
breakpoints printed.
(is_hardware_watchpoint): Make argument const.
(is_watchpoint): Ditto.
(is_tracepoint): Merge of tracepoint_type and breakpoint_is_tracepoint,
use it everywhere.
(breakpoints_info): Pass NULL to breakpoint_1.
(maintenance_info_breakpoints): Ditto.
(watchpoints_info): New function.
(tracepoints_info): Use breakpoint_1 filter.
(set_ignore_count): Warn that tracepoint ignore count will be ignored.
(_initialize_breakpoint): Make "info watchpoints" its own command.
* breakpoint.h (is_tracepoint): Rename from breakpoint_is_tracepoint.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Use is_tracepoint.
* gdb.texinfo (Setting Breakpoints): "info watch" no longer a synonym.
(Setting Watchpoints): Update description of "info watch".
(Disabling Breakpoints): Only "info break" lists all.
* gdb.base/completion.exp: Update for new "info watchpoints".
* gdb.base/default.exp: Ditto.
* gdb.base/help.exp: Ditto.
* gdb.base/watchpoint.exp: Ditto.
* gdb.trace/infotrace.exp: Update "info tracpoints" output.
an extended waitstatus, or by a watchpoint.
(cancel_breakpoints_callback): Don't cancel a breakpoint if the
thread was stepping or has been stopped by a watchpoint.
(set_gdb_breakpoint_at): If GDB is inserting a breakpoint on top
of another, then delete the previous, and validate all
breakpoints.
(validate_inserted_breakpoint): New.
(delete_disabled_breakpoints): New.
(validate_breakpoints): New.
(check_mem_read): Validate breakpoints before trusting their
shadow. Delete disabled breakpoints.
(check_mem_write): Validate breakpoints before trusting they
should be inserted. Delete disabled breakpoints.
* mem-break.h (validate_breakpoints):
* server.c (handle_query): Validate breakpoints when we see a
qSymbol query.
there's a GDB breakpoint at stop_pc. Always report a trap to GDB
if we could tell there's a GDB breakpoint at stop_pc.
(need_step_over_p): Don't do a step over if we find a GDB
breakpoint at the resume PC.
* mem-break.c (struct raw_breakpoint): New.
(enum bkpt_type): New type `gdb_breakpoint'.
(struct breakpoint): Delete the `PC', `old_data' and `inserted'
fields. New field `raw'.
(find_raw_breakpoint_at): New.
(set_raw_breakpoint_at): Handle refcounting. Create a raw
breakpoint instead.
(set_breakpoint_at): Adjust.
(delete_raw_breakpoint): New.
(release_breakpoint): New.
(delete_breakpoint): Rename to...
(delete_breakpoint_1): ... this. Add proc parameter. Use
release_breakpoint. Return ENOENT.
(delete_breakpoint): Reimplement.
(find_breakpoint_at): Delete.
(find_gdb_breakpoint_at): New.
(delete_breakpoint_at): Delete.
(set_gdb_breakpoint_at): New.
(delete_gdb_breakpoint_at): New.
(gdb_breakpoint_here): New.
(set_reinsert_breakpoint): Use release_breakpoint.
(uninsert_breakpoint): Rename to ...
(uninsert_raw_breakpoint): ... this.
(uninsert_breakpoints_at): Adjust to handle raw breakpoints.
(reinsert_raw_breakpoint): Change parameter type to
raw_breakpoint.
(reinsert_breakpoints_at): Adjust to handle raw breakpoints
instead.
(check_breakpoints): Adjust. Use release_breakpoint.
(breakpoint_here): Rewrite using find_raw_breakpoint_at.
(breakpoint_inserted_here): Ditto.
(check_mem_read): Adjust to iterate over raw breakpoints instead.
Don't trust the breakpoint's shadow if it is not inserted.
(check_mem_write): Adjust to iterate over raw breakpoints instead.
(delete_all_breakpoints): Adjust.
(free_all_breakpoints): Mark all breakpoints as uninserted, and
use delete_breakpoint_1.
* mem-break.h (breakpoints_supported): Delete declaration.
(set_gdb_breakpoint_at): Declare.
(gdb_breakpoint_here): Declare.
(delete_breakpoint_at): Delete.
(delete_gdb_breakpoint_at): Declare.
* server.h (struct raw_breakpoint): Forward declare.
(struct process_info): New field `raw_breakpoints'.
* linux-x86-low.c (x86_insert_point, x86_remote_point): Handle Z0
breakpoints.
* tracepoint.c: Include stack.h.
(struct add_local_symbols_data): New.
(do_collect_symbol): New.
(add_local_symbols): Rewrite using iterate_over_block_arg_vars and
iterate_over_block_local_vars.
* stack.c (print_block_frame_locals): Rewrite as ...
(iterate_over_block_locals): ... this. Take a callback function
pointer and generic data pointer, and call that instead of
print_variable_and_value.
(struct print_variable_and_value_data): New.
(do_print_variable_and_value): New.
(iterate_over_block_local_vars): New, abstracted out from
print_frame_local_vars.
(print_frame_local_vars): Rewrite using
iterate_over_block_local_vars.
(iterate_over_block_arg_vars): New, abstracted out from
print_frame_arg_vars.
(print_frame_arg_vars): Rewrite using iterate_over_block_arg_vars.
* stack.h (iterate_over_block_arg_local_vars_cb): New typedef.
(iterate_over_block_arg_vars, iterate_over_block_local_vars): Declare.
gdb/testsuite/
* gdb.trace/collection.c (local_test_func): Define a local struct,
and instanciate it.
Fix crash on reading wrong function declaration DWARF.
* dwarf2read.c (read_subroutine_type): New variable void_type.
Pre-fill all TYPE_FIELD_TYPEs. Move nparams and iparams initialization
more close to their use.
gdb/testsuite/
* gdb.dwarf2/dw2-bad-parameter-type.exp,
gdb.dwarf2/dw2-bad-parameter-type.S: New.
* breakpoint.c (tracepoint_save_command): Include variables,
conditionals, tracepoint types, and default-collect.
* tracepoint.c (save_trace_state_variables): New function.
* tracepoint.h (save_trace_state_variables): Declare it.
* gdb.trace/save-trace.exp: Test save/restore of default-collect
and tracepoint conditionals.
(gdb_verify_tracepoints): Delete unused return.
for java, regardless of whether it is TYPE_PROTOTYPED.
Use the passed-in language instead of current_language.
(c_type_print_varspec_suffix): Use current_language instead
of assuming language_c.
* jv-typeprint.c (java_type_print_base): (bz 9320) Strip off
any return type specifier from the physname.
(tui_init): Set it.
(tui_allowed_p): New.
* tui/tui.c (tui_enable): Check if the TUI is allowed before
enabling it.
* tui/tui.h (tui_allowed_p): Declare.
(binfile): Use it.
(fpreg, spreg, pcreg): New.
(test_register): Use gdb_test_multiple. Pass /x to print.
(prepare_for_trace_test): New.
(run_trace_experiment): Use "continue", not gdb_run_cmd.
(gdb_collect_args_test, gdb_collect_argstruct_test)
(gdb_collect_argarray_test, gdb_collect_locals_test): Use
prepare_for_trace_test.
(gdb_collect_registers_test): Use prepare_for_trace_test. Use
fpreg, spreg and pcreg.
(gdb_collect_expression_test, gdb_collect_globals_test): Use
prepare_for_trace_test.
(gdb_trace_collection_test): Use fpreg, spreg and pcreg. Don't
try to detect tracing support here. Don't set breakpoints at
`begin' or `end' here.
<global scope>: Use clean_restart. Run to main before checking
for tracing support. Check for for tracing support here.
* cli/cli-script.c (process_next_line): Handle 'stepping'.
gdb/testsuite/
* gdb.trace/while-dyn.exp (executable): New variable.
(binfile): Use it.
(test_while_stepping): New function. Move most tests here. Call
it once for each of the while-stepping, stepping and ws aliases.
(skip_prologue_sal): Remove local definition.
(resolve_sal_pc): Remove now unnecessary code.
* linespec.c (minsym_found): Call skip_prologue_sal.
* symtab.c (find_function_start_pc): Remove.
(find_function_start_sal): Extract prologue skipping into ...
(skip_prologue_sal): ... this new function. Handle code both
with and without debug info. Respect SAL's explicit_pc and
explicit_line flags. Inline old find_function_start_pc.
* symtab.h (find_function_start_pc): Remove.
(skip_prologue_sal): Add prototype.
* dwarf2read.c (dwarf2_name): Work around GCC bugzilla debug/41828 by
ignoring spurious DW_AT_name attributes for unnamed structs or unions.
* completer.c (add_struct_fields): Fix inverted logic.
testsuite/ChangeLog:
* gdb.cp/inherit.exp (test_ptype_si): XFAIL test for GCC versions
that do not provide the tagless_struct type name at all.
(test_print_anon_union): Do not check value of uninitialized
union member. Do not use cp_test_ptype_class, so we can accept
"long" as well as "long int".
is non-NULL here.
(parse_trace_status): Release a previous error_desc string, and
set it to NULL by default. If stop reason is tracepoint_error,
make sure error_desc is not left NULL.
* tracepoint.c (parse_trace_status): Don't allow plain strings in
the terror description. Don't expect an X prefix.
gdb/doc/
* gdb.texinfo (Tracepoint Packets): Remove mention that
terror:string may be plain text, and drop mention of X prefix.
* symfile.c (build_section_addr_info_from_bfd): New.
(build_section_addr_info_from_objfile): Base it on
build_section_addr_info_from_bfd.
(addrs_section_compar, addrs_section_sort): New.
(addr_info_make_relative): New variables my_cleanup, abfd_addrs,
addrs_sorted, abfd_addrs_sorted and addrs_to_abfd_addrs. Build
addrs_to_abfd_addrs. Use it for recalculating ADDRS.
gdb/testsuite/
* gdb.base/dup-sect.exp, gdb.base/dup-sect.S: New.
* gdb.base/ending-run.exp: Match _rt_entry.* for RealView.
* gdb.base/gdbvars.c (main): Remove unused usestubs code. Reference
variable p.
* gdb.base/maint.exp: Allow ER_RO and ER_RW instead of .text and .data.
* gdb.base/pointers.exp: Allow long instead of long int.
* gdb.base/printcmds.exp: XFAIL for RealView on ARM EABI.
* gdb.base/step-line.exp: Allow a directory before the source file name.
PR breakpoints/9352:
* NEWS: Mention changes to `commands' and `rbreak'.
* symtab.c (do_end_rbreak_breakpoints): New function.
(rbreak_command): Call start_rbreak_breakpoints; arrange to call
end_rbreak_breakpoints.
* breakpoint.c (breakpoint_count, tracepoint_count): Now static.
(set_breakpoint_count): Likewise. Clear last_was_multi.
(multi_start, multi_end, last_was_multi): New globals.
(start_rbreak_breakpoints, end_rbreak_breakpoints): New
functions.
(struct commands_info): New
(do_map_commands_command): New function.
(commands_command_1): New function.
(commands_command): Use it.
(commands_from_control_command): Likewise.
(do_delete_breakpoint): New function.
(delete_command): Use it.
(map_breakpoint_numbers): Add 'data' argument. Pass to callback.
(do_map_disable_breakpoint): New function.
(disable_command): Use it.
(do_map_enable_breakpoint): New function.
(enable_command): Use it.
(enable_once_breakpoint): Add argument.
(enable_once_command): Update.
(enable_delete_breakpoint): Add argument.
(enable_delete_command): Update.
(break_command_really): Set last_was_multi when needed.
(check_tracepoint_command): Fix formatting.
(validate_commands_for_breakpoint): New function.
(breakpoint_set_commands): Use it.
(tracepoint_save_command): Update.
* breakpoint.h (start_rbreak_breakpoints, end_rbreak_breakpoints):
Declare.
gdb/doc
PR breakpoints/9352:
* gdb.texinfo (Break Commands): Update.
gdb/testsuite
PR breakpoints/9352:
* gdb.base/default.exp: Update.
* gdb.base/commands.exp: Update.
* gdb.cp/extern-c.exp: Test setting commands on multiple
breakpoints at once.
if gdb,nosignals.
* gdb.base/watchpoints.c: Do not include unnecessary headers.
* lib/gdb.exp (gdb_test_multiple): Relax pattern for "the program
exited".
(linux_wait_for_event_1): Move most of the internal breakpoint
handling from here...
(linux_wait_1): ... to here.
(count_events_callback): New.
(select_singlestep_lwp_callback): New.
(select_event_lwp_callback): New.
(cancel_breakpoints_callback): New.
(select_event_lwp): New.
(linux_wait_1): Simplify internal breakpoint handling. Give equal
priority to all LWPs that have had events that should be reported
to the client. Cancel breakpoints when about to reporting the
event to the client, not while stopping lwps. No longer cancel
finished single-steps here.
(cancel_finished_single_step): Delete.
(cancel_finished_single_steps): Delete.
(struct breakpoint): New field `type'.
(set_breakpoint_at): Change return type to struct breakpoint
pointer. Set type to `other_breakpoint' by default.
(delete_breakpoint): Rewrite, supporting more than one breakpoint
in the breakpoint list.
(delete_reinsert_breakpoints): Only delete reinsert breakpoints.
(reinsert_breakpoint): Rename to ...
(reinsert_raw_breakpoint): ... this.
(reinsert_breakpoints_at): Adjust.
* mem-break.h (struct breakpoint): Declare.
(set_breakpoint_at): Change return type to struct breakpoint
pointer.
* dwarf2read.c (load_full_comp_unit): Read DW_AT_producer.
(read_structure_type): For RealView, set TYPE_STUB on structures with
no byte size and no children.
(read_subroutine_type): Mark functions as prototyped by default.
* symtab.c (producer_is_realview): New function.
* symtab.h (expand_line_sal): Fix declaration formatting.
(producer_is_realview): Declare.
testsuite/
* gdb.base/callfuncs.exp (do_function_calls): Add XFAILs for RealView.
* gdb.base/ptype.exp (ptype_maybe_prototyped): Add overprototyped
argument. Handle "short" and "long".
(Top level): Pass overprototyped output for old_fptr and xptr.
(submask, bit, bits, sbits, BranchDest): Move higher in the file.
(thumb_analyze_prologue): Document return value. Recognize more
Thumb instructions, skippable calls, and some Thumb-2 instructions.
Add debug output.
(arm_skip_prologue): Remove call dummy check. Check the prologue
for non-GNU compilers.
(arm_instruction_changes_pc): New function.
(arm_analyze_prologue): New function, broken out from
arm_scan_prologue. Recognize more ARM instructions and skippable
calls. Update comments. Handle NULL cache. Return the address
of the first unrecognized instruction. Do not skip past other
instructions which change control flow. Add debug output.
(arm_scan_prologue): Use arm_analyze_prologue.
(ARM_PC_32): Delete.
(shifted_reg_val): Simplify ARM_PC_32 check.
* defs.h (read_command_lines, read_command_lines_1): New
parameters validator and closure.
* tracepoint.h (struct action_line): Remove.
* breakpoint.h (struct breakpoint): Remove the 'actions'
field.
* defs.h (enum command_control_type): New value
while_stepping_control.
(struct command_line): Add comments.
* breakpoint.c (breakoint_is_tracepoint): New.
(breakpoint_set_commands): For tracepoints,
verify the commands are permissible.
(check_tracepoint_commands): New.
(commands_command): Require that each new line is validated using
check_tracepoint_command, if we set commands for a tracepoint.
(create_tracepoint_from_upload): Likewise.
(print_one_breakpoint_location): Remove the code to print
actions specifically.
(tracepoint_save_command): Relay to print_command_lines.
* cli/cli-script.c (process_next_line): New parameters validator
and closure. Handle 'while-stepping'. Call validator if not null.
(read_command_lines, read_command_lines1): Likewise.
(recurse_read_control_structure): New parameters validator and
closure. Handle while_stepping_control.
(print_command_lines): Handle while-stepping.
(get_command_line, define_command, document_command): Adjust.
* remote.c (remote_download_tracepoint): Adjust.
* tracepoint.c (make_cleanup_free_actions, read_actions)
(free_actions, do_free_actions_cleanup): Remove.
(trace_actions_command): Use read_command_lines.
(validate_actionline): Use error in one place.
(encode_actions_1): New, extracted from...
(encode_actions): ...this. Also use cleanups for exception
safety.
(trace_dump_command): Adjust.
* mi/mi-cmd-break (mi_cmd_break_commands): Validate commands if
it's tracepoint.
Building gdb with --enable-targets=all and --with-system-readline hits a
failure in a few targets all related to the inclusion of some opcodes
headers. The usage of the bundled readline results in an -I to the top
srcdir, but if that isn't used, then there is no such -I path. A few gdb
targets use this implicitly to include opcodes/ source header files. So
make sure there is always an explicit -I path to the opcodes/ directory.
Pedro Alves <pedro@codesourcery.com>
* target.h (struct target_ops): New method
to_set_circular_trace_buffer.
(target_set_circular_trace_buffer): New macro.
* target.c (update_current_target): Add
to_set_circular_trace_buffer, fix to_set_disconnected_tracing
default behavior.
* remote.c (remote_set_circular_trace_buffer): New function.
(init_remote_ops): Add it to vector.
* tracepoint.h (struct trace_status): New field traceframes_created,
change buffer_size and buffer_free to int.
* tracepoint.c (circular_trace_buffer): New global.
(start_tracing): Send values of disconnected tracing and circular
trace buffer settings.
(set_circular_trace_buffer): New function.
(parse_trace_state): Handle total space and frames created.
(trace_status_command): Display total space and total frames
created.
(trace_save): Write out new status values.
(parse_trace_status): Set traceframe_count, traceframes_created,
buffer_free and buffer_size to -1 by default.
(_initialize_tracepoint): New setshow for circular-trace-buffer.
* NEWS: Mention the circular trace buffer option.
* gdb.texinfo (Starting and Stopping Trace Experiments): Describe
circular-trace-buffer.
(Tracepoint Packets): Describe QTBuffer, and details of the
qTStatus reply.
* gdb.trace/circ.exp: Test circular-trace-buffer.
* gdb.trace/tfile.exp: Update tstatus test.
According to the DWARF3 standard, a function always has a name attribute
(Section 3.3 - Subroutine and Entry Point Entries). The only exception
is when a DW_AT_abstract_origin attribute is provided, in which case
the name may be inherited from the referenced DIE.
The problem occured because our compiler generated a subprogram DIE
for a nested function where the name attribute was missing (and no
abstract-origin either). Our code in add_partial_symbol is not
prepared to deal with the situation, and happily just tries to compute
the length of the (NULL) function name.
This normally cannot happen, because there is already a guard in
scan_partial_symbols, where we (silently!) ignore anonymous dies,
including anonymous subprograms. Unfortunately, there is a flaw that
affects Ada and other languages that allow nested subprograms. For
nested subprograms, we do not go through scan_partial_symbols and
thus we are missing the name check.
This patch adds the name check in the nested subprogram case. It also
adds a complaint which is emitted during the psymtab->symtab conversion
phase.
gdb/ChangeLog:
* dwarf2read.c (add_partial_subprogram): Make sure the subprogram
DIE has a name before creating the associated partial symbol.
(read_func_scope): Emit a complaint if the subprogram does not
have a name or when we can't extract the subprogram PC bounds.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-anonymous-func.S: New file.
* gdb.dwarf2/dw2-anonymous-func.exp: New testcase.
Tested on x86_64-linux, no regression. Note that the testcase also
verifies that the psymtab->symtab conversion does not crash (this is
the purpose of the "list file1.txt:1" test.
* infcmd.c (until_command): Use ERROR_NO_INFERIOR. Ensure there's
a valid selected thread, and that it is not running.
(advance_command): Ditto.
(finish_command): Ditto.
gdb/testsuite/
* gdb.base/default.exp: Adjust.
* ax-gdb.h (struct axs_value): New field optimized_out.
(gen_trace_for_var): Add gdbarch argument.
* ax-gdb.c (gen_trace_static_fields): New function.
(gen_traced_pop): Call it, add gdbarch argument.
(gen_trace_for_expr): Update call to it.
(gen_trace_for_var): Ditto, and report optimized-out variables.
(gen_struct_ref_recursive): Check for optimized-out value.
(gen_struct_elt_for_reference): Ditto.
(gen_static_field): Pass gdbarch instead of expression, assume
optimization if field not found.
(gen_var_ref): Set the optimized_out flag.
(gen_expr): Error on optimized-out variable.
* tracepoint.c (collect_symbol): Handle struct-valued vars as
expressions, skip optimized-out variables with computed locations.
* dwarf2loc.c (dwarf2_tracepoint_var_ref): Flag instead of
erroring out if location expression missing.
(loclist_tracepoint_var_ref): Don't error out here.
This is to prevent an internal error during an Ada task switch. A task
switch is simply a thread switch under the hood. What we do is collect
the info from the Ada Task Control Block, deduce the associated thread
ptid, and then switch to that thread. If the thread ptid computation
routine has not been implemented for the target, of if there is a bug,
then we end up computing a bogus ptid which GDB does not know about,
which eventually leads to an assertion failure:
(gdb) task 1
[New Thread 5715]
/[...]/gdb/thread.c:595: internal-error: is_thread_state:
Assertion `tp' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
When this happens, it's just nicer for the user to print an error
message, and cancel the task switch. After this patch is applied,
this is what we get:
(gdb) task 1
[New Thread 10250]
Unable to compute thread ID for task 1.
Cannot switch to this task.
gdb/ChangeLog:
* ada-tasks.c (task_command_1): Check that the task ptid is valid
before doing the associated thread switch.
* ax-gdb.c: Include cp-support.h.
(find_field): Remove.
(gen_primitive_field): New function.
(gen_struct_ref_recursive): New function.
(gen_struct_ref): Rewrite to call gen_struct_ref_recursive instead
of find_field.
(gen_static_field): New function.
(gen_struct_elt_for_reference): New.
(gen_namespace_elt): New.
(gen_maybe_namespace_elt): New.
(gen_aggregate_elt_ref): New.
(gen_expr): Add OP_SCOPE, display opcode name in error message.
PR c++/7936:
* cp-support.h: Added char *declaration element to using_direct
data struct.
(cp_add_using): Added char *declaration argument.
(cp_add_using_directive): Ditto.
(cp_lookup_symbol_imports): made extern.
* cp-namespace.c: Updated with the above changes.
* dwarf2read.c (read_import_statement): Ditto.
(read_namespace): Ditto.
(read_import_statement): Support import declarations.
* cp-namespace.c (cp_lookup_symbol_imports): Check for imported
declarations.
Added support for 'declaration_only' search.
(cp_lookup_symbol_namespace): Attempt to search for the name as
is before consideration of imports.
* symtab.c (lookup_symbol_aux_local): Added a 'declaration_only'
search at every block level search.
Now takes language argument.
(lookup_symbol_aux): Updated.
2010-03-15 Sami Wagiaalla <swagiaal@redhat.com>
* gdb.cp/shadow.exp: Removed kfail; test has been fix.
* gdb.cp/nsusing.exp: Ditto.
`stopped_by_watchpoint' and `stopped_data_address'.
* linux-low.c (linux_wait_for_lwp): Check for watchpoint triggers
here, and cache them in the lwp object.
(wait_for_sigstop): Check stopped_by_watchpoint lwp field
directly.
(linux_resume_one_lwp): Clear the lwp's stopped_by_watchpoint
field.
(linux_stopped_by_watchpoint): Rewrite.
(linux_stopped_data_address): Rewrite.
PR c++/9708:
* dwarf2read.c (die_needs_namespace) <DW_TAG_variable>: A variable
in a lexical block does not need a namespace.
(new_symbol) <DW_TAG_variable>: Put extern variables on
list_in_scope in all cases.
gdb/testsuite
PR c++/9708:
* gdb.cp/m-static.exp: Add regression test.
* gdb.cp/m-static.cc (method): New method.
(main): Call it.
* lib/gdb.exp (skip_stl_tests): New.
(gdb_compile): Symbian needs -ldl.
(shlib_target_file): New.
(shlib_symbol_file): New.
(gdb_load_shlibs): Use shlib_target_file.
* lib/mi-support.exp (mi_load_shlibs): Use shlib_target_file.
* gdb.cp/exception.exp: Use skip_stl_tests.
* gdb.cp/bs15503.exp: Use skip_stl_tests. Use untested.
* gdb.cp/try_catch.exp: Use skip_stl_tests.
* gdb.cp/mb-templates.exp: Ditto.
* gdb.base/commands.exp: Relax regexes.
* gdb.base/watchpoint-solib.exp: Don't skip on symbian. Use
shlib_target_file and shlib_symbol_file.
* gdb.base/maint.exp: Allow lowercase t. Allow .rodata in
sections.
* gdb.base/ending-run.exp: Accept E32Main for symbian.
* gdb.base/solib-disc.exp: Use
shlib_target_file and shlib_symbol_file.
* gdb.base/unload.exp: Don't skip on symbian. Use
shlib_target_file and shlib_symbol_file.
* gdb.base/list.exp: Check use_gdb_stub instead of is_remote.
* gdb.trace/report.exp: Adjust for x86 and x86_64.
Issue a tfind end before looking for a tracepoint frame.
* gdb.trace/tfind.exp: Adjust tstatus output.
Adjust disassembly output.
* gdb.trace/while-dyn.exp: Adjust for x86 and x86_64.
* solib-svr4.c (LM_ADDR_CHECK) <info_verbose>: Use printf_unfiltered
for the PIC displacement, print also the displacement value.
(svr4_exec_displacement): Print DISPLACEMENT if INFO_VERBOSE.
gdb/testsuite/
* gdb.base/break-interp.exp: Create new displacement parameter value
for the test_ld calls.
(reach): New parameter displacement, verify its content. New push of
pf_prefix "reach-$func:". Import global expect_out.
(test_core): New parameter displacement, verify its content. New push
of pf_prefix "core:". New command "set verbose on". Import global
expect_out.
(test_attach): New parameter displacement, verify its content. New
push of pf_prefix "attach:". New command "set verbose on". Import
global expect_out.
(test_ld): New parameter displacement, pass it to the reach, test_core
and test_attach calls and verify its content in the "ld.so exit" test.
* gdb.base/prelink.exp: Remove gdb_exit and final return.
(prelink): Update expected text, use gdb_test.
* solib-svr4.c (svr4_exec_displacement): Return now success, new
parameter displacementp. Update comment.
(svr4_relocate_main_executable): Return if non-zero SECTION_OFFSETS
element exists. Return if svr4_exec_displacement was not successful.
Update comment.
* solib-svr4.c (read_program_header): Support type == -1 to read
all program headers.
(read_program_headers_from_bfd): New function.
(svr4_static_exec_displacement): Remove and move the comment ...
(svr4_exec_displacement): ... here. Remove variable found. New
variable displacement. Check also DYNAMIC. Verify DISPLACEMENT
alignment for ELF targets. Compare target vs. exec_bfd PHDRs for ELF
targets using read_program_headers_from_bfd. Remove the call of
svr4_static_exec_displacement.
* breakpoint.c (condition_command): Handle watchpoint conditions.
(is_hardware_watchpoint): Add comment.
(is_watchpoint): New.
(update_watchpoint): Don't reparse the watchpoint's condition
unless necessary.
(WP_IGNORE): New.
(watchpoint_check): Use it.
(bpstat_check_watchpoint): Handle it.
(bpstat_check_breakpoint_conditions): Evaluate watchpoint local
conditions in a frame where it makes sense.
(watch_command_1): Store the innermost block of the condition
expression.
(delete_breakpoint): Delete the watchpoint condition expression.
* breakpoint.h (struct bp_location) <cond>: Update comment.
(struct breakpoint): New fields `cond_exp' and
`cond_exp_valid_block'.
gdb/testsuite/
* gdb.base/watch-cond.c, gdb.base/watch-cond.exp: New.
posix/win32.
(windows_make_so): Use non-Cygwin 1.7 specific function.
(windows_create_inferior): Make sure that cygallargs points to original args in
non Cygwin 1.7. case.
Based on work from Daniel Jacobowitz <dan@codesourcery.com>
* c-typeprint.c (cp_type_print_method_args): For non-static methods,
print out const or volatile qualifiers, too.
(c_type_print_args): Add parameters show_artificial and language.
Skip artificial parameters when requested.
Use the appropriate language printer.
(c_type_print_varspec): Tell c_type_print_args to skip artificial
parameters and pass language_c.
* dwarf2read.c (die_list): New file global.
(struct partial_die_info): Update comments for name field.
(pdi_needs_namespace): Renamed to ...
(die_needs_namespace): ... this. Rewrite.
(dwarf2_linkage_name): Remove.
(add_partial_symbol): Do not predicate the call to
partial_die_full_name based on pdi_needs_namespace.
Remove call to cp_check_possible_namespace_symbols and associated
outdated comments.
(guess_structure_name): Do not inspect child subprogram DIEs.
(dwarf2_fullname): Update comments.
Use die_needs_namespace to assist in computing the name.
(read_func_scope): Use dwarf2_name to get the DIE's name.
Use dwarf2_physname to get the "linkage name" of the DIE.
(dwarf2_add_member_field): Use dwarf2_physname instead of
dwarf2_linkage_name.
(read_structure_type): For structs and classes, set TYPE_NAME, too.
(determine_class): Remove.
(read_partial_die): Ignore DW_AT_MIPS_linkage_name for all languages
except Ada.
(new_symbol): Unconditionally call dwarf2_name.
Compute the "linkage name" using dwarf2_physname.
Use dwarf2_name instead of dwarf2_full_name for enumerator DIEs.
When determining to scan for anonymous C++ namespaces, ignore
the linkage name.
(dwarf2_physname): New function.
(dwarf2_full_name): Move content to new function and call
that.
(dwarf2_compute_name): "New" function.
(_initialize_dwarf2_read): Initialize die_list.
* gnu-v3-eabi.c (gnu_v3_find_method_in): Remove unused variable
physname.
(gnu_v3_print_method_ptr): Use the physname for virtual methods
without a demangled name.
Print out type information for non-virtual methods.
* linespec.c (decode_line_1): Force ANY string using "::" (or
"." for java) to use decode_compound, and clean up any stray quoting.
If we found a file symtab, re-evaluate whether the remainder is_quoted.
(decode_compound): Stop consuming at an open parenthesis.
Keep template parameters.
Keep any overload information.
Keep keywords like "const".
Remove paren_pointer.
Move is_quoted check from set_flags to here.
Remove #if 0 code from 2000. Ten years is long enough.
(find_method): Before comparing symbol names, canonicalize the string
from the user.
If a specific overload is requested, find it. Otherwise throw an error.
(find_method_overload_end): New function.
(set_flags): Remove.
(decode_compound): Assume that parentheses are matched.
It's a lot easier.
* symtab.c (symbol_find_demangled_name): Add DMGL_VERBOSE flag
to cplus_demangle.
* linespec.c (decode_line_1): Keep important keywords like
"const" and "volatile".
* symtab.h (SYMBOL_CPLUS_DEMANGLED_NAME): Remove.
* typeprint.h (c_type_print_args): Add declaration.
* ui-file.c (do_ui_file_obsavestring): New function.
(ui_file_obsavestring): New function.
* ui-file.h (ui_file_obsavestring): Add declaration.
* valops.c (find_overload_match): Resolve the object to
a non-pointer type.
If the object is a data member, search the object for the member
and return with staticp set.
Use SYMBOL_NATURAL_NAME instead of SYMBOL_CPLUS_DEMANGLED_NAME.
Do not attempt to extract a function name from non-function types.
If the extracted function name and the original name are the same,
we don't have a C++ method.
From Jan Kratochvil <jan.kratochvil@redhat.com>:
* dwarf2read.c (new_symbol <DW_TAG_enumerator>): Call dwarf2_full_name.
* ada-lang.c (ada_lookup_symbol): Remove linkage_name parameters
and arguments from symbol lookups.
* ax-gdb.c (gen_expr): Likewise.
* cp-namespace.c (cp_lookup_symbol_nonlocal, lookup_namespace_scope,
cp_lookup_symbol_namespace, lookup_symbol_file, lookup_nested_type,
lookup_possible_namespace_symbol): Likewise.
* cp-support.c (read_in_psymtabs): Likewise.
* cp-support.h (cp_lookup_symbol_nonlocal): Likewise.
* language.h (la_lookup_symbol_nonlocal): Likewise.
* scm-valprint.c (scm_inferior_print): Likewise.
* solib-darwin.c (darwin_relocate_section_addresses): Likewise.
* solib-svr.c (elf_lookup_lib): Likewise.
* solib.c (show_auto_solib_add): Likewise.
* solist.h (lookup_lib_global, solib_global_lookup): Likewise.
* symmisc.c (maintenance_check_symtabs): Likewise.
* symtab.c (lookup_symbol_in_language, lookup_symbol_aux,
lookup_symbol_aux_local, lookup_symbol_aux_block,
lookup_symbol_from_objfile, lookup_symbol_aux_symtabs,
lookup_symbol_aux_psymtabs,basic_lookup_symbol_nonlocal,
lookup_symbol_static, lookup_symbol_global, symbol_matches_domain,
basic_lookup_transparent_type, find_main_psymtab,
lookup_block_symbol): Likewise.
* symtab.h (basic_lookp_symbol_nonlocal, lookup_symbol_static,
lookup_symbol_global, lookup_symbol_aux_block,
lookup_symbol_partial_symbol, lookup_block_symbol,
lookup_global_symbol, value_maybe_namespace_elt): Likewise.
* gdb.cp/cplusfuncs.cc (dm_type_short): New function.
(dm_type_long): New function.
(dm_type_unsigned_short): New function.
(dm_type_unsigned_long): New function.
(myint): New typedef.
* gdb.cp/cplusfuncs.exp (probe_demangler): Add tests for short,
long, unsigned shor and long, operator char*, and typedef.
(test_lookup_operator_functions): Add operator char* test.
(test_paddr_operator_functions): Likewise.
(test_paddr_overloaded_functions): Use probe values for
short, long, and unsigned short and long.
(test_paddr_hairy_functions): If the demangler probe detected
gdb type printers, "expect" them. Otherwise "expect" the v2 or v3
demangler.
* gdb.cp/expand-sals.exp: Backtrace may contain class names.
* gdb.cp/member-ptr.exp: Refine expected result for "print pmf"
and "print null_pmf".
Add test "ptype a.*pmf".
* gdb.cp/overload.exp: Allow optional "int" to appear with
"short" and "long".
* gdb.cp/ovldbreak.exp: Use append to construct super-duper
long expect value for men_overload1arg.
Allow "int" to appear with "short" and "long".
When testing "info break", add argument for main (void).
Also allow "int" to appear with "short" and "long".
Ditto with "unsigned" and "long long".
* gdb.java/jmain.exp: Do not enclose methods names in single
quotes.
* gdb.java/jmisc.exp: Likewise.
* gdb.java/jprint.exp: Likewise.
* gdb.python/py-symbol.exp: Update expected "linkage_name" value.
From Jan Kratochvil <jan.kratochvil@redhat.com>:
* gdb.cp/exception.exp (backtrace after first throw)
(backtrace after second throw): Allow a namespace before __cxa_throw.
(backtrace after first catch, backtrace after second catch): Allow
a namespace before __cxa_begin_catch.
* gdb.cp/cpexprs.exp: New file.
* gdb.cp/cpexprs.cc: New file.
From Daniel Jacobowitz <dan@codesourcery.com>
* gdb.cp/cpexprs.exp (escape): Delete. Change all callers
to use string_to_regexp.
(ctor, dtor): New functions. Use them to match constructor
and destructor function types.
(Top level): Use runto_main.
solib_symbols_extension is set in the target gdbarch.
* arm-symbian-tdep.c (arm_symbian_init_abi): Set
solib_symbols_extension to "sym".
* gdbarch.sh (solib_symbols_extension): New variable.
(pstring): New function.
* gdbarch.h, gdbarch.c: Regenerate.
gdbadmin
Pedro Alves
Pierre Muller
H.J. Lu
Mike Frysinger
Kevin Buettner
Stan Shebs
Joel Brobecker
Doug Evans
Phil Muldoon
Mark Kettenis
Richard Earnshaw
Jan Kratochvil
Ulrich Weigand
Hui Zhu
Sergio Durigan Junior
Keith Seitz
Tom Tromey
Sami Wagiaalla
Eli Zaretskii
Vladimir Prus
Michael Snyder
Daniel Jacobowitz
Andreas Schwab
Jie Zhang
Christopher Faylor