OpenE2K/binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
101,481 Commits 4 Branches 0 Tags 364 MiB
1207375d76
Commit Graph

39 Commits

Author SHA1 Message Date
Alan Modra
b3adc24a07 Update year range in copyright notice of binutils files 2020-01-01 18:42:54 +10:30
Alexandre Oliva
38c3873e5d Speed up locview resolution with relaxable frags 
Targets such as xtensa incur a much higher overhead to resolve
location view numbers than e.g. x86, because the expressions used to
compute view numbers cannot be resolved soon enough.

Each view number is computed by incrementing the previous view, if
they are both at the same address, or by resetting it to zero
otherwise.  If PV is the previous view number, PL is its location, and
NL is the location of the next view, its number is computed by
evaluating NV = !(NL > PL) * (PV + 1).

set_or_check_view uses resolve_expression to decide whether portions
of this expression can be simplified to constants.  The (NL > PL)
subexpression is one that can often be resolved to a constant,
breaking chains of view number computations at instructions of nonzero
length, but not after alignment that might be unnecessary.

Alas, when nearly every frag ends with a relaxable instruction,
frag_offset_fixed_p will correctly fail to determine a known offset
between two unresolved addresses in neighboring frags, so the
unresolved symbolic operation will be constructed and used in the
computation of most view numbers.  This results in very deep
expressions.

As view numbers get referenced in location view lists, each operand in
the list goes through symbol_clone_if_forward_ref, which recurses on
every subexpression.  If each view number were to be referenced, this
would exhibit O(n^2) behavior, where n is the depth of the view number
expressions, i.e., the length of view number sequences without an
early resolution that cuts the expression short.

This patch enables address compares used by view numbering to be
resolved even when exact offsets are not known, using new logic to
determine when the location either remained the same or changed for
sure, even with the possibility of relaxation.  This enables most view
number expressions to be resolved with a small, reasonable depth.

	PR gas/24444
	* frags.c (frag_gtoffset_p): New.
	* frags.h (frag_gtoffset_p): Declare it.
	* expr.c (resolve_expression): Use it.
 2019-04-25 08:35:13 +09:30
Alan Modra
871a6bd2d8 Make frag fr_fix unsigned 
The field only stores unsigned values, so let's make it unsigned to
stop people worrying about the possibility of negative values.

	* frags.h (struct frag <fr_fix>): Use unsigned type.
	* frags.c (frag_new): Assert that current size exceeds
	old_frags_var_max_size.
	* ehopt.c (get_cie_info): Adjust for unsigned fr_fix.
	* listing.c (calc_hex): Likewise.
	* write.c (cvt_frag_to_fill, write_relocs): Likewise.
	* config/tc-arc.c (md_convert_frag): Likewise.
	* config/tc-avr.c (avr_patch_gccisr_frag): Likewise.
	* config/tc-mips.c (md_convert_frag): Likewise.
	* config/tc-rl78.c (md_convert_frag): Likewise.
	* config/tc-rx.c (md_convert_frag): Likewise.
	* config/tc-sparc.c (md_apply_fix): Likewise.
	* config/tc-xtensa.c (next_instrs_are_b_retw): Likewise.
	(unrelaxed_frag_min_insn_count, unrelaxed_frag_has_b_j): Likewise.
 2019-04-16 17:12:09 +09:30
Alan Modra
827041555a Update year range in copyright notice of binutils files 2019-01-01 22:06:53 +10:30
Alan Modra
219d1afa89 Update year range in copyright notice of binutils files 2018-01-03 17:49:56 +10:30
Alan Modra
2571583aed Update year range in copyright notice of all files. 2017-01-02 14:08:56 +10:30
Trevor Saunders
3b4dbbbf59 Add more const type qualifiers to GAS sources. 
* output-file.c (output_file_create): Make file name argument const.
	(output_file_close): Likewise.
	* output-file.h (output_file_create): Adjust.
	(output_file_close): Likewise.
	* depend.c (quote_string_for_make): Make src argument const char *.
	(register_dependency): Likewise.
	(wrap_output): Likewise.
	* as.h (register_dependency): Adjust.
	* config/tc-xtensa.c (finish_vinsn): Remove unnecessary calls to
	as_where ();
	* symbols.c (S_SET_EXTERNAL): Likewise.
	* input-scrub.c (as_where): Return the file name.
	* as.h (as_where): Adjust prototype.
	* app.c (do_scrub_chars): Adjust.
	* cond.c (s_elseif): Likewise.
	(s_else): Likewise.
	(initialize_cframe): Likewise.
	* config/obj-coff.c (obj_coff_init_stab_section): Likewise.
	* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
	* config/obj-som.c (obj_som_init_stab_section): Likewise.
	* config/tc-aarch64.c (output_info): Likewise.
	* config/tc-ia64.c (md_assemble): Likewise.
	(dot_alias): Likewise.
	* config/tc-m68k.c (m68k_frob_label): Likewise.
	* config/tc-mmix.c (s_bspec): Likewise.
	(mmix_handle_mmixal): Likewise.
	* config/tc-rx.c (rx_include): Likewise.
	* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
	(tic54x_adjust_symtab): Likewise.
	* config/tc-xtensa.c (directive_push): Likewise.
	(xtensa_sanity_check): Likewise.
	(xtensa_relax_frag): Likewise.
	(md_convert_frag): Likewise.
	(tinsn_to_slotbuf): Likewise.
	* dwarf2dbg.c (dwarf2_where): Likewise.
	* ecoff.c (add_file): Likewise.
	(ecoff_generate_asm_lineno): Likewise.
	* expr.c (make_expr_symbol): Likewise.
	* frags.c (frag_new): Likewise.
	(frag_var_init): Likewise.
	* listing.c (listing_newline): Likewise.
	* messages.c (identify): Likewise.
	(as_show_where): Likewise.
	(as_warn_internal): Likewise.
	(as_bad_internal): Likewise.
	* read.c (s_irp): Likewise.
	(s_macro): Likewise.
	(s_reloc): Likewise.
	* stabs.c (stabs_generate_asm_file): Likewise.
	(stabs_generate_asm_lineno): Likewise.
	(stabs_generate_asm_func): Likewise.
	* write.c (fix_new_internal): Likewise.
	* as.h (PRINTF_WHERE_LIKE): Make file name argument const.
	(as_warn_value_out_of_range): Adjust prototype.
	(as_bad_value_out_of_range): Adjust prototype.
	* messages.c (identify): Make file name argument const char *.
	(as_warn_internal): Likewise.
	(as_warn_where): Likewise.
	(as_bad_internal): Likewise.
	(as_bad_where): Likewise.
	(as_internal_value_out_of_range): Likewise.
	(as_warn_value_out_of_range): Likewise.
	(as_bad_value_out_of_range): Likewise.
	* as.h (found_comment_file): Change type to const char *.
	* cond.c (file_line::file): Likewise.
	* config/obj-coff.c (obj_coff_init_stab_section): Make variable const.
	* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
	* config/obj-som.c (obj_som_init_stab_section): Likewise.
	* config/tc-aarch64.c (output_info): Likewise.
	* config/tc-alpha.c (insert_operand): Likewise.
	* config/tc-arc.c (insert_operand): Likewise.
	* config/tc-d30v.c (check_size): Likewise.
	* config/tc-ia64.c (struct alias): Likewise.
	* config/tc-m68k.c (struct label_line): Likewise.
	* config/tc-mcore.c (md_apply_fix): Likewise.
	* config/tc-microblaze.c (md_estimate_size_before_relax): Likewise.
	* config/tc-mips.c (mips16_immed): Likewise.
	* config/tc-mmix.c (mmix_handle_mmixal): Likewise.
	* config/tc-ppc.c (ppc_insert_operand): Likewise.
	* config/tc-rx.c (rx_include): Likewise.
	* config/tc-s390.c (s390_insert_operand): Likewise.
	* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
	(tic54x_adjust_symtab): Likewise.
	* config/tc-tilegx.c (insert_operand): Likewise.
	(apply_special_operator): Likewise.
	* config/tc-tilepro.c (insert_operand): Likewise.
	* config/tc-xtensa.c (directive_push): Likewise.
	* ecoff.c (add_file): Likewise.
	(ecoff_generate_asm_lineno): Likewise.
	* listing.c (listing_newline): Likewise.
	* read.c (s_irp): Likewise.
	* write.c (install_reloc): Likewise.
	* write.h (struct fix): Likewise.
	* input-file.c (file_name): Change type to const char *.
	(saved_file::file_name): Likewise.
	(input_file_open): Change type of argument to const char *.
	* input-file.h (input_file_open): Adjust.
	* input-scrub.c (logical_input_file): change type to const char *.
	(physical_input_file): Likewise.
       	(struct input_save): Adjust.
	(input_scrub_push): Adjust.
	(input_scrub_begin): Adjust.
	(as_where): Adjust.
	* input-scrub.c (input_scrub_new_file): Make file name argument const.
	(input_scrub_include_file): Likewise.
	(new_logical_line_flags): Likewise.
	(new_logical_line): Likewise.
	* as.h: Adjust.
	* frags.h (struct frag): Change type of fr_file to const char *.
	* expr.c (expr_symbol_where): Change type of file argument to
	const char **.
	* expr.h (expr_symbol_where): Likewise.
	* config/tc-i370.c (md_apply_fix): adjust.
	* config/tc-mmix.c (mmix_md_end): Likewise.
	* config/tc-ppc.c (md_apply_fix): Likewise.
	* config/tc-s390.c (md_apply_fix): Likewise.
	* symbols.c (report_op_error): Likewise.
	(resolve_symbol_value): Likewise.
	* config/tc-ia64.c (slot::src_file): Change type to const char *.
	(rsrc::file): Likewise.
	* config/tc-xtensa.c (xtensa_sanity_check): Change type of variable to
	const char *.
	(xtensa_relax_frag): Likewise.
	(md_convert_frag): Likewise.
	(tinsn_to_slotbuf): Likewise.
	* expr.c (expr_symbol_line): Likewise.
	* macro.c (define_macro): Likewise.
	* macro.h (macro_struct): Likewise.
	* messages.c (as_show_where): Likewise.
	* read.c (s_macro): Likewise.
	* stabs.c (stabs_generate_asm_file): Likewise.
	(generate_asm_file): Likewise.
	(stabs_generate_asm_lineno): Likewise.
	* write.h (struct reloc_list): Likewise.
	* input-scrub.c (as_where): Change return type to const char *.
	* as.h (as_wheree): Adjust.
 2016-02-22 14:11:27 +00:00
Alan Modra
6f2750feaf Copyright update for binutils 2016-01-01 23:00:01 +10:30
Alan Modra
b90efa5b79 ChangeLog rotatation and copyright year update 2015-01-02 00:53:45 +10:30
Alan Modra
e57e6ddc2e Prepare gas for 64-bit obstacks 
Use size_t in a few places involved with obstacks, and don't include
obstack.h in files that don't use obstacks.

gas/
	* config/bfin-parse.y: Don't include obstack.h.
	* config/obj-aout.c: Likewise.
	* config/obj-coff.c: Likewise.
	* config/obj-som.c: Likewise.
	* config/tc-bfin.c: Likewise.
	* config/tc-i960.c: Likewise.
	* config/tc-rl78.c: Likewise.
	* config/tc-rx.c: Likewise.
	* config/tc-tic4x.c: Likewise.
	* expr.c: Likewise.
	* listing.c: Likewise.
	* config/obj-elf.c (elf_file_symbol): Make name_length a size_t.
	* config/tc-aarch64.c (symbol_locate): Likewise.
	* config/tc-arm.c (symbol_locate): Likewise.
	* config/tc-mmix.c (mmix_handle_mmixal): Make len_0 a size_t.
	* config/tc-score.c (s3_build_score_ops_hsh): Make len a size_t.
	(s3_build_dependency_insn_hsh): Likewise.
	* config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
	(s7_build_dependency_insn_hsh): Likewise.
	* frags.c (frag_grow): Make parameter a size_t, and use size_t locals.
	(frag_new): Make parameter a size_t.
	(frag_var_init): Make max_chars and var parameters size_t.
	(frag_var, frag_variant): Likewise.
	(frag_room): Return a size_t.
	(frag_align_pattern): Make n_fill parameter a size_t.
	* frags.h: Update function prototypes.
	* symbols.c (save_symbol_name): Make name_length a size_t.
 2014-07-26 21:00:50 +09:30
David Weatherford
a82c7d9030 Add support to the Xtensa target for creating trampolines for out-of-range branches. 
* tc-xtensa.c (xtensa_check_frag_count, xtensa_create_trampoline_frag)
    (xtensa_maybe_create_trampoline_frag, init_trampoline_frag)
    (find_trampoline_seg, search_trampolines, get_best_trampoline)
    (check_and_update_trampolines, add_jump_to_trampoline)
    (dump_trampolines): New function.
    (md_parse_option): Add cases for --[no-]trampolines options.
    (md_assemble, finish_vinsn, xtensa_end): Add call to
    xtensa_check_frag_count.
    (xg_assemble_vliw_tokens): Add call to
    xtensa_maybe_create_trampoline_frag.
    (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
    (relax_frag_immed): Relax jump instructions that cannot reach its
    target.
    * tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New relax
    state.

    * as.texinfo: Document --[no-]trampolines command-line options.
    * c-xtensa.texi: Document trampolines relaxation and command line
    options.

    * frags.c (get_frag_count, clear_frag_count): New function.
    (frag_alloc): Increment totalfrags counter.
    * frags.h (get_frag_count, clear_frag_count): New function.

    * all.exp: Add test for trampoline relaxation.
    * trampoline.d: Trampoline relaxation expected dump.
    * trampoline.s: Trampoline relaxation test source.
 2014-03-21 11:53:42 +00:00
Alan Modra
4b95cf5c0c Update copyright years 2014-03-05 22:16:15 +10:30
Alan Modra
08ea70204d * frags.h (frag_offset_fixed_p): Update prototype. 
* frags.c (frag_offset_fixed_p): Change type of "offset" to offsetT.
	* expr.c (expr, resolve_expression): Likewise for frag_off var.
 2012-06-30 00:27:31 +00:00
Iain Sandoe
cdaa5616cb 2012-02-21 Tristan Gingold <gingold@adacore.com> 
* config/tc-i386.h (OBJ_MACH_O): New section.
	(TC_FORCE_RELOCATION): Use obj_mach_o_force_reloc.
	(TC_FORCE_RELOCATION_SUB_SAME): New
	(TC_FORCE_RELOCATION_SUB_LOCAL): New.
	(TC_VALIDATE_FIX_SUB): New.
	* frags.h (struct frag): OBJ_FRAG_TYPE, new field.
	* symbols.c (colon): obj_frob_colon: New hook.
	* write.c (write_object_file): md_pre_relax_hook, new
	hook.
	* config/obj-macho.c (obj_mach_o_frob_colon): New.
	(obj_mach_o_frob_label): Record sub-section labels.
	(obj_mach_o_frob_symbol): Rename from obj_macho_frob_symbol.
	(obj_mach_o_set_subsections): New.
	(obj_mach_o_pre_relax_hook): New.
	(obj_mach_o_in_different_subsection): New.
	(obj_mach_o_force_reloc_sub_same): New.
	(obj_mach_o_force_reloc_sub_local): New.
	(obj_mach_o_force_reloc): New.
	* config/obj-macho.h (OBJ_SYMFIELD_TYPE): New.
	(obj_frob_colon): New Define.
	(obj_mach_o_frob_label): Renamed.
	(obj_mach_o_frob_symbol): Renamed.
	(OBJ_FRAG_TYPE): New.
	(obj_mach_o_in_different_subsection, obj_mach_o_force_reloc,
	 obj_mach_o_force_reloc_sub_same,
	 obj_mach_o_force_reloc_sub_local): New declarations.
 2012-02-21 09:13:02 +00:00
Alan Modra
6885131b49 * as.c (main): Define .gasversion. rather than __GAS_VERSION__. 
* frags.h (bss_address_frag): Delete
	(predefined_address_frag): New.
	* frags.c (frag_init): Init predefined_address_frag.  Delete ref
	to bss_addres_frag.
	* symbols.c (S_CAN_BE_REDEFINED): New function.
	* symbols.h (S_CAN_BE_REDEFINED): Declare.
	* read.c (assign_symbol): Use S_CAN_BE_REDEFINED.
 2011-10-12 21:07:07 +00:00
Alan Modra
e35a414d3c PR gas/12049 
* frags.h (struct frag): Add "region" field.
	* write.c (relax_frag): Don't add "stretch" to forward reference
	target if there is an intervening org or align.
	(relax_segment): Set region.
 2010-10-19 12:00:33 +00:00
Nick Clifton
ec2655a6a7 Switch to GPLv3 2007-07-03 11:01:12 +00:00
Alan Modra
6cbe03fb0f * frags.c (frag_offset_fixed_p): Constify args. 
* frags.h (frag_offset_fixed_p): Ditto.
 2006-04-18 09:58:26 +00:00
Alan Modra
9963077898 PR 997 
* frags.c (frag_offset_fixed_p): New function.
	* frags.h (frag_offset_fixed_p): Declare.
	* expr.c (expr): Use frag_offset_fixed_p when simplifying subtraction.
	(resolve_expression): Likewise.
 2006-04-04 08:04:57 +00:00
Ben Elliston
b4f261e094 * frags.h: Remove ANSI_PROTOTYPES conditional code. 
* config/obj-elf.h: Likewise.
	* config/tc-h8300.h: Likewise.
	* config/tc-h8500.h: Likewise.
	* config/tc-i370.h: Likewise.
	* config/tc-i386.h: Likewise.
	* config/tc-m68hc11.h: Likewise.
	* config/tc-m68k.h: Likewise.
	* config/tc-ppc.h: Likewise.
	* config/tc-s390.h: Likewise.
	* config/tc-sh.h: Likewise.
	* config/tc-sparc.h: Likewise.
	* config/tc-tic30.c: Likewise.
	* config/tc-w65.h: Likewise.
	* config/tc-xtensa.h: Likewise.
 2005-07-08 05:57:21 +00:00
Nick Clifton
4b4da1607a Update the address and phone number of the FSF 2005-05-05 09:13:19 +00:00
Alan Modra
2da5c03714 update copyright dates 2005-03-03 01:29:54 +00:00
Ben Elliston
59c871b457 * as.h: Remove #if 0'd code. 
* atof-generic.c (atof_generic): Likewise.
	* ecoff.c (ecoff_directive_frame): Likewise.
	* frags.h (FRAG_APPEND_1_CHAR): Likewise.
	* itbl-ops.c (itbl_add_reg): Likewise.
	* listing.c (calc_hex): Likewise.
	* read.c (MASK_CHAR): Likewise.
	* subsegs.c (subsegs_print_statistics): Likewise.
	* symbols.c (indent): Likewise.
	* write.c (write_relocs): Likewise.
	(write_object_file): Likewise.
	(relax_frag): Likewise.
 2005-01-21 05:54:38 +00:00
Alan Modra
09b935accc * frags.h (struct frag): Add has_code and insn_addr fields. 
* write.c (cvt_frag_to_fill): Invoke md_frag_check.
	* config/tc-ppc.c (md_assemble): Check and set insn_addr.
	* config/tc-ppc.h (md_frag_check): Define.
 2004-07-02 06:40:19 +00:00
Richard Sandiford
0530d30a58 * frags.h (frag_room): Declare. 
* frags.c (frag_room): New function.
	* doc/internals.texi: Document it.
 2004-01-23 12:52:20 +00:00
Kazu Hirata
dd625418be * ehopt.c: Convert to ISO-C. 
* emul.h: Likewise.
	* expr.c: Likewise.
	* expr.h: Likewise.
	* flonum-copy.c: Likewise.
	* flonum-mult.c: Likewise.
	* flonum.h: Likewise.
	* frags.c: Likewise.
	* frags.h: Likewise.
 2003-11-22 16:03:03 +00:00
Kazu Hirata
47eebc207f * ChangeLog: Fix typos. 
* ChangeLog-9295: Likewise.
	* as.c: Fix comment typos.
	* as.h: Likewise.
	* atof-generic.c: Likewise.
	* bit_fix.h: Likewise.
	* frags.h: Likewise.
	* hash.c: Likewise.
	* input-file.c: Likewise.
	* input-scrub.c: Likewise.
	* itbl-ops.c: Likewise.
	* itbl-parse.y: Likewise.
	* listing.c: Likewise.
	* macro.h: Likewise.
	* read.c: Likewise.
	* sb.c: Likewise.
	* sb.h: Likewise.
	* symbols.c: Likewise.
	* symbols.h: Likewise.
 2003-10-27 12:45:17 +00:00
Kazu Hirata
d1a6c2428d * as.h: Fix formatting. 
* cgen.c: Likewise.
	* cgen.h: Likewise.
	* dwarf2dbg.c: Likewise.
	* frags.h: Likewise.
	* gasp.c: Likewise.
	* macro.c: Likewise.
	* read.c: Likewise.
	* stabs.c: Likewise.
	* symbols.c: Likewise.
 2002-05-03 02:25:33 +00:00
Alan Modra
e46d99eb07 Multi-pass relaxation machinery. 2001-03-30 02:19:36 +00:00
Alan Modra
38686296b3 Use `relax_marker' instead of fragile address test code to determine 
whether a frag's fr_address has been updated.
 2001-03-20 03:12:01 +00:00
Nick Clifton
f7e42eb4af Fix copyright notices 2001-03-08 23:24:26 +00:00
Richard Henderson
0a9ef43907 * as.h (rs_align_test): New. 
* frags.c (NOP_OPCODE): Move default from read.c.
	(MAX_MEM_FOR_RS_ALIGN_CODE): New default.
	(frag_align_code): New.
	* frags.h (frag_align_code): Declare.
	* read.c (NOP_OPCODE): Remove.
	(do_align): Use frag_align_code.
	* write.c (NOP_OPCODE): Remove.
	(get_recorded_alignment): New.
	(cvt_frag_to_fill): Handle rs_align_test.
	(relax_segment): Likewise.
	(subsegs_finish): Align last subseg in section to the
	section alignment.  Use frag_align_code.
	* write.h (get_recorded_alignment): Declare.
	* config/obj-coff.c (size_section): Handle rs_align_test.
	(fill_section, fixup_mdeps): Likewise.
	(write_object_file): Use frag_align_code.

	* config/tc-alpha.c (alpha_align): Use frag_align_code.
	(alpha_handle_align): New.
	* config/tc-alpha.h (HANDLE_ALIGN): New.
	(MAX_MEM_FOR_RS_ALIGN_CODE): New.

	* config/tc-i386.h (md_do_align): Use frag_align_code.
	(MAX_MEM_FOR_RS_ALIGN_CODE): New.

	* config/tc-ia64.c (ia64_md_do_align): Don't do code alignment.
	(ia64_handle_align): New.
	* config/tc-ia64.h (HANDLE_ALIGN): New.
	(MAX_MEM_FOR_RS_ALIGN_CODE): New.

	* config/tc-m32r.c (m32r_do_align): Remove.
	(m32r_handle_align): New.
	(fill_insn): Use frag_align_code.
	* config/tc-m32r.h (md_do_align): Remove.
	(HANDLE_ALIGN, MAX_MEM_FOR_RS_ALIGN_CODE): New.
	* config/tc-m88k.c, config/tc-m88k.h: Similarly.
	* config/tc-mips.c, config/tc-mips.h: Similarly.

	* config/tc-sh.c (sh_cons_align): Use rs_align_test.
	(sh_handle_align): Likewise.  Handle rs_align_code.
	(sh_do_align): Remove.
	* config/tc-sh.h (md_do_align): Remove.
	(MAX_MEM_FOR_RS_ALIGN_CODE): New.

	* config/tc-sparc.c (sparc_cons_align): Use rs_align_test.
	(sparc_handle_align): Likewise.  Handle rs_align_code.
	* config/tc-sparc.h (md_do_align): Remove.
	(MAX_MEM_FOR_RS_ALIGN_CODE): New.
 2000-12-28 10:07:56 +00:00
Kazu Hirata
e6c774b42a 2000-10-17 Kazu Hirata <kazu@hxi.com> 
* debug.c: Fix formatting.
	* depend.c: Likewise.
	* dwarf2dbg.c: Likewise.
	* dwarf2dbg.h: Likewise.
	* ecoff.c: Likewise.
	* expr.c: Likewise.
	* expr.h: Likewise.
	* flonum-konst.c: Likewise.
	* frags.h: Likewise.
 2000-10-17 20:21:45 +00:00
Kazu Hirata
a01b9fa4ba 2000-09-12 Kazu Hirata <kazu@hxi.com> 
* as.h: Fix formatting.
	* asintl.h: Likewise.
	* bit_fix.h: Likewise.
	* dwarf2dbg.h: Likewise.
	* expr.h: Likewise.
	* flonum.h: Likewise.
	* frags.h: Likewise.
	* itbl-ops.h: Likewise.
	* macro.h: Likewise.
	* read.h: Likewise.
	* sb.h: Likewise.
	* struc-symbol.h: Likewise.
	* subsegs.h: Likewise.
	* symbols.h: Likewise.
	* tc.h: Likewise.
	* write.h: Likewise.
 2000-09-12 20:57:14 +00:00
Alan Modra
5a327c7ac2 Missed copyright update in last patch. 2000-05-23 05:07:47 +00:00
Alan Modra
ee7fcc42b1 Pass jump reloc in fr_var so it can be used in 
md_estimate_size_before_relax, replacing old kludge.
 2000-05-23 04:48:21 +00:00
Timothy Wall
bea9907b2a octets vs bytes changes for GAS 2000-02-03 18:20:23 +00:00
Ian Lance Taylor
49309057b4 Add support for storing local symbols in a small structure to save 
memory when assembling large files.
	* as.h: Don't include struc-symbol.h.
	(symbolS): Add typedef.
	* symbols.c: Include struc-symbol.h.
	(local_hash): New static variable.
	(save_symbol_name): New static function, from symbol_create.
	(symbol_create): Call save_symbol_name.
	(local_symbol_count): New static variable.
	(local_symbol_conversion_count): Likewise.
	(LOCAL_SYMBOL_CHECK): Define.
	(local_symbol_make): New static function.
	(local_symbol_convert): New static function.
	(colon): Handle local symbols.  Create local symbol for local
	label name.
	(symbol_table_insert): Handle local symbols.
	(symbol_find_or_make): Create local symbol for local label name.
	(symbol_find_base): Check for local symbol.
	(symbol_append, symbol_insert): Check for local symbols.
	(symbol_clear_list_pointers, symbol_remove): Likewise.
	(verify_symbol_chain): Likewise.
	(copy_symbol_attributes): Likewise.
	(resolve_symbol_value): Handle local symbols.
	(resolve_local_symbol): New static function.
	(resolve_local_symbol_values): New function.
	(S_GET_VALUE, S_SET_VALUE): Handle local symbols.
	(S_IS_FUNCTION, S_IS_EXTERNAL, S_IS_WEAK, S_IS_COMMON): Likewise.
	(S_IS_DEFINED, S_IS_DEBUG, S_IS_LOCAL, S_GET_NAME): Likewise.
	(S_GET_SEGMENT, S_SET_SEGMENT, S_SET_EXTERNAL): Likewise.
	(S_CLEAR_EXTERNAL, S_SET_WEAK, S_SET_NAME): Likewise.
	(symbol_previous, symbol_next): New functions.
	(symbol_get_value_expression): Likewise.
	(symbol_set_value_expression): Likewise.
	(symbol_set_frag, symbol_get_frag): Likewise.
	(symbol_mark_used, symbol_clear_used, symbol_used_p): Likewise.
	(symbol_mark_used_in_reloc): Likewise.
	(symbol_clear_used_in_reloc, symbol_used_in_reloc_p): Likewise.
	(symbol_mark_mri_common, symbol_clear_mri_common): Likewise.
	(symbol_mri_common_p): Likewise.
	(symbol_mark_written, symbol_clear_written): Likewise.
	(symbol_written_p): Likewise.
	(symbol_mark_resolved, symbol_resolved_p): Likewise.
	(symbol_section_p, symbol_equated_p): Likewise.
	(symbol_constant_p): Likewise.
	(symbol_get_bfdsym, symbol_set_bfdsym): Likewise.
	(symbol_get_obj, symbol_set_obj): Likewise.
	(symbol_get_tc, symbol_set_tc): Likewise.
	(symbol_begin): Initialize local_hash.
	(print_symbol_value_1): Handle local symbols.
	(symbol_print_statistics): Print local symbol statistics.
	* symbols.h: Include "struc-symbol.h" if not BFD_ASSEMBLER.
	Declare new symbols.c functions.  Move many declarations here from
	struc-symbol.h.
	(SYMBOLS_NEED_BACKPOINTERS): Define if needed.
	* struc-symbol.h (SYMBOLS_NEED_BACKPOINTERS): Don't set.
	(struct symbol): Move bsym to make it clearly the first field.
	Remove TARGET_SYMBOL_FIELDS.
	(symbolS): Don't typedef.
	(struct broken_word): Remove.
	(N_TYPE_seg, seg_N_TYPE): Move to symbol.h.
	(SEGMENT_TO_SYMBOL_TYPE, N_REGISTER): Likewise.
	(symbol_clear_list_pointers): Likewise.
	(symbol_insert, symbol_remove): Likewise.
	(symbol_previous, symbol_append): Likewise.
	(verify_symbol_chain, verify_symbol_chain_2): Likewise.
	(struct local_symbol): Define.
	(local_symbol_converted_p, local_symbol_mark_converted): Define.
	(local_symbol_resolved_p, local_symbol_mark_resolved): Define.
	(local_symbol_get_frag, local_symbol_set_frag): Define.
	(local_symbol_get_real_symbol): Define.
	(local_symbol_set_real_symbol): Define.
	Define.
	* write.c (write_object_file): Call resolve_local_symbol_values.
	* config/obj-ecoff.h (OBJ_SYMFIELD_TYPE): Define.
	(TARGET_SYMBOL_FIELDS): Don't define.
	* config/obj-elf.h (OBJ_SYMFIELD_TYPE): Add local field.  If
	ECOFF_DEBUGGING, add ECOFF fields.
	(ELF_TARGET_SYMBOL_FIELDS, TARGET_SYMBOL_FIELDS): Don't define.
	* config/obj-multi.h (struct elf_obj_sy): Add local field.  If
	ECOFF_DEBUGGING, add ECOFF fields.
	(ELF_TARGET_SYMBOL_FIELDS, TARGET_SYMBOL_FIELDS): Don't define.
	(ECOFF_DEBUG_TARGET_SYMBOL_FIELDS): Don't define.
	* config/tc-mcore.h: Don't include struc-symbol.h.
	(TARGET_SYMBOL_FIELDS): Don't define.
	(struct mcore_tc_sy): Define.
	(TC_SYMFIELD_TYPE): Define.
	* Many files: Use symbolS instead of struct symbol.  Use new
	accessor functions rather than referring to symbolS fields
	directly.
	* read.c (s_mri_common): Don't add in value of line_label.
	* config/tc-mips.c (md_apply_fix): Correct parenthesization when
	checking for SEC_LINK_ONCE.
	* config/tc-sh.h (sh_fix_adjustable): Declare.
 1999-06-03 00:29:48 +00:00
Richard Henderson
252b5132c7 19990502 sourceware import 1999-05-03 07:29:11 +00:00