This commit moves the code to handle lwp_info.arch_private for
Linux x86 into a new shared file, nat/x86-linux.c.
gdb/ChangeLog:
* nat/x86-linux.h: New file.
* nat/x86-linux.c: Likewise.
* Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
(x86-linux.o): New rule.
* config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
(lwp_set_arch_private_info): New declaration.
(lwp_arch_private_info): Likewise.
* linux-nat.c (lwp_set_arch_private_info): New function.
(lwp_arch_private_info): Likewise.
* x86-linux-nat.c: Include nat/x86-linux.h.
(arch_lwp_info): Removed structure.
(update_debug_registers_callback):
Use lwp_set_debug_registers_changed.
(x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
and lwp_set_debug_registers_changed.
(x86_linux_new_thread): Use lwp_set_debug_registers_changed.
gdb/gdbserver/ChangeLog:
* Makefile.in (x86-linux.o): New rule.
* configure.srv: Add x86-linux.o to relevant targets.
* linux-low.c (lwp_set_arch_private_info): New function.
(lwp_arch_private_info): Likewise.
* linux-x86-low.c: Include nat/x86-linux.h.
(arch_lwp_info): Removed structure.
(update_debug_registers_callback):
Use lwp_set_debug_registers_changed.
(x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
and lwp_set_debug_registers_changed.
(x86_linux_new_thread): Use lwp_set_debug_registers_changed.
IIUC it is a pre-requisite for IPv6 support, some UNICes do not support
getaddrinfo required for IPv6. But coincidentally such UNICes are no longer
really supported by GDB. Therefore it was concluded we can remove all such
UNICes and then we can implement IPv6 easily with getaddrinfo.
In mail
Re: getaddrinfo available on all GDB hosts? [Re: [PATCH v2] Add IPv6 support for remote TCP connections]
Message-ID: <20140211034157.GG5485@adacore.com>
https://sourceware.org/ml/gdb-patches/2014-02/msg00333.html
Joel said:
So I chose HP-UX first for this patch.
gdb/ChangeLog
2014-10-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Remove HPUX.
* Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
(ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
(HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
ia64-hpux-tdep.h, solib-ia64-hpux.h.
(ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
* config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
hppa-hpux-tdep.c.
* config/ia64/hpux.mh: Remove file.
* config/pa/hpux.mh: Remove file.
* configure: Rebuilt.
* configure.ac (dlgetmodinfo, somread.o): Remove.
* configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
(ia64-*-hpux*): Remove its float format exception.
* configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
* hppa-hpux-nat.c: Remove file.
* hppa-hpux-tdep.c: Remove file.
* hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
Move them here from hppa-tdep.h
(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
(hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
* hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
Move them to hppa-tdep.c.
(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
declarations.
* ia64-hpux-nat.c: Remove file.
* ia64-hpux-tdep.c: Remove file.
* ia64-hpux-tdep.h: Remove file.
* inf-ttrace.c: Remove file.
* inf-ttrace.h: Remove file.
* solib-ia64-hpux.c: Remove file.
* solib-ia64-hpux.h: Remove file.
* solib-pa64.c: Remove file.
* solib-pa64.h: Remove file.
* solib-som.c: Remove file.
* solib-som.h: Remove file.
* somread.c: Remove file.
This commits cleans up the gdb/breakpoint.c file and moves everything
that is related to the 'catch syscall' command to the new file
gdb/break-catch-syscall.c. This is just code movement, and the only
new part is the adjustment needed on 'catching_syscall_number' to use
the new 'breakpoint_find_if' function insted of relying on the
ALL_BREAKPOINTS macro.
Tested by running the 'gdb.base/catch-syscall.exp' testcase.
gdb/ChangeLog:
2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): New source break-catch-syscall.c.
(COMMON_OBS): New object break-catch-syscall.o.
* break-catch-syscall.c: New file.
* breakpoint.c: Remove inclusion of "xml-syscall.h".
(syscall_catchpoint_p): Move declaration to break-catch-syscall.c
(struct syscall_catchpoint): Likewise.
(dtor_catch_syscall): Likewise.
(catch_syscall_inferior_data): Likewise.
(struct catch_syscall_inferior_data): Likewise.
(get_catch_syscall_inferior_data): Likewise.
(catch_syscall_inferior_data_cleanup): Likewise.
(insert_catch_syscall): Likewise.
(remove_catch_syscall): Likewise.
(breakpoint_hit_catch_syscall): Likewise.
(print_it_catch_syscall): Likewise.
(print_one_catch_syscall): Likewise.
(print_mention_catch_syscall): Likewise.
(print_recreate_catch_syscall): Likewise.
(catch_syscall_breakpoint_ops): Likewise.
(syscall_catchpoint_p): Likewise.
(create_syscall_event_catchpoint): Likewise.
(catch_syscall_split_args): Likewise.
(catch_syscall_command_1): Likewise.
(is_syscall_catchpoint_enabled): Likewise.
(catch_syscall_enabled): Likewise.
(catching_syscall_number): Likewise.
(catch_syscall_completer): Likewise.
(clear_syscall_counts): Likewise.
(initialize_breakpoint_ops): Move initialization of syscall
catchpoints to break-catch-syscall.c.
(_initialize_breakpoint): Move code related to syscall catchpoints
to break-catch-syscall.c.
This new option, disabled by default for now, allows specifying
whether to build GDB, GDBserver, and friends with a C++ (98/03)
compiler.
The name of the switch should be familiar to those who followed GCC's
own C++ conversion process.
. Adding -fpermissive to COMPILER in C++ mode (see the new
build-with-cxx.m4 file) makes errors like these be warnings instead:
gdb/infrun.c:6597:1: error: initializing argument 1 of ‘void sig_print_info(gdb_signal)’ [-fpermissive]
sig_print_info (enum gdb_signal oursig)
^
gdb/infrun.c: In function ‘void do_restore_infcall_suspend_state_cleanup(void*)’:
gdb/infrun.c:7164:39: error: invalid conversion from ‘void*’ to ‘infcall_suspend_state*’ [-fpermissive]
restore_infcall_suspend_state (state);
^
so that the compiler carries on compiling the file. -Werror still
catches the warnings, so nothing is lost, only our lifes are made
easier by concentrating on getting other more important things out of
the way first.
There's no way to quiet those warnings. Until they're all fixed, when
building in C++ mode, -Werror is disabled by default.
. Adding -Wno-narrowing suppresses thousands of instances of this warning:
gdb/arm-linux-tdep.c:439:1: error: narrowing conversion of ‘-1’ from ‘int’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing]
gdb/arm-linux-tdep.c:439:1: error: narrowing conversion of ‘-1l’ from ‘LONGEST {aka long int}’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing]
gdb/arm-linux-tdep.c:450:1: error: narrowing conversion of ‘-1’ from ‘int’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing]
We can defer handling those until we target C++11.
. Adding -Wno-sign-compare suppresses thousands of instances of this warning:
gdb/linux-record.c:1763:32: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (tmpulongest == tdep->fcntl_F_GETLK64)
^
. Adding -Wno-write-strings suppresses thousands of instances of this warning:
gdb/mi/mi-cmd-var.c: In function ‘void mi_cmd_var_show_attributes(char*, char**, int)’:
gdb/mi/mi-cmd-var.c:514:12: warning: deprecated conversion from string constant to ‘char*’ [-Wwrite-strings]
attstr = "editable";
^
gdb/mi/mi-cmd-var.c:516:12: warning: deprecated conversion from string constant to ‘char*’ [-Wwrite-strings]
attstr = "noneditable";
^
For now, it's best to hide these warnings from view until we're
'-fpermissive'-clean, and can thus start building with -Werror.
The C compiler has always managed to build working GDBs with these
issues in the code, so a C++ compiler should too.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER): New, get it from autoconf.
(COMPILE.pre, CC_LD): Use COMPILER.
(CXX): Get from autoconf instead.
(CXX_FOR_TARGET): Default to g++ instead of gcc.
* acinclude.m4: Include build-with-cxx.m4.
* build-with-cxx.m4: New file.
* configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
Disable -Werror by default if building in C++ mode.
(build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
-Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
Run supported-warning-flags tests with the C++ compiler.
Save/restore CXXFLAGS too.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* Makefile.in (COMPILER): New, get it from autoconf.
(CXX): Get from autoconf instead.
(COMPILE.pre): Use COMPILER.
(CC-LD): Rename to ...
(CC_LD): ... this. Use COMPILER.
(gdbserver$(EXEEXT), gdbreplay$(EXEEXT), $(IPA_LIB)): Adjust.
(CXX_FOR_TARGET): Default to g++ instead of gcc.
* acinclude.m4: Include build-with-cxx.m4.
* configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
Disable -Werror by default if building in C++ mode.
(build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
-Wno-narrowing in C++ mode. Run supported-warning-flags tests with
the C++ compiler. Save/restore CXXFLAGS too.
* configure: Regenerate.
Preparation for using this on all hosts.
Confirmed that --host=x86_64-w64-mingw32 still builds the stub
termcap.
gdb/ChangeLog:
2015-02-26 Pedro Alves <palves@redhat.com>
* windows-termcap.c: Rename to ...
* stub-termcap.c: ... this. Adjust header line.
* Makefile.in (SFILES): Refer to stub-termcap.c instead of
windows-termcap.c.
* configure: Regenerate.
* configure.ac: Refer to stub-termcap.o instead of
windows-termcap.o.
* gdb_curses.h: Mention stub-termcap.c instead of
windows-termcap.c.
This patch introduces a new M4 macro GDB_AC_TRANSFORM to avoid repeating
the common idiom which is the transformation of target program names,
i.e. from gdb to sparc64-linux-gnu-gdb. It also makes gdb/configure.ac
and gdb/testsuite/configure.ac to use the new macro.
gdb/ChangeLog:
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* Makefile.in (aclocal_m4_deps): Added transform.m4.
* acinclude.m4: sinclude transform.m4.
* transform.m4: New file.
(GDB_AC_TRANSFORM): New macro.
gdb/testsuite/ChangeLog:
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* aclocal.m4: sinclude ../transform.m4.
This patch adds a new type of probe to GDB: the DTrace USDT probes. The new
type is added by providing functions implementing all the entries of the
`probe_ops' structure defined in `probe.h'. The implementation is
self-contained and does not depend on DTrace source code in any way.
gdb/ChangeLog:
2015-02-7 Jose E. Marchesi <jose.marchesi@oracle.com>
* breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
the -probe-dtrace new vpossible value for PROBE_MODIFIER.
* configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
handle ELF files.
* Makefile.in (SFILES): dtrace-probe.c added.
* configure: Regenerate.
* dtrace-probe.c: New file.
(SHT_SUNW_dof): New constant.
(dtrace_probe_type): New enum.
(dtrace_probe_arg): New struct.
(dtrace_probe_arg_s): New typedef.
(struct dtrace_probe_enabler): New struct.
(dtrace_probe_enabler_s): New typedef.
(dtrace_probe): New struct.
(dtrace_probe_is_linespec): New function.
(dtrace_dof_sect_type): New enum.
(dtrace_dof_dofh_ident): Likewise.
(dtrace_dof_encoding): Likewise.
(DTRACE_DOF_ENCODE_LSB): Likewise.
(DTRACE_DOF_ENCODE_MSB): Likewise.
(dtrace_dof_hdr): New struct.
(dtrace_dof_sect): Likewise.
(dtrace_dof_provider): Likewise.
(dtrace_dof_probe): Likewise.
(DOF_UINT): New macro.
(DTRACE_DOF_PTR): Likewise.
(DTRACE_DOF_SECT): Likewise.
(dtrace_process_dof_probe): New function.
(dtrace_process_dof): Likewise.
(dtrace_build_arg_exprs): Likewise.
(dtrace_get_arg): Likewise.
(dtrace_get_probes): Likewise.
(dtrace_get_probe_argument_count): Likewise.
(dtrace_can_evaluate_probe_arguments): Likewise.
(dtrace_evaluate_probe_argument): Likewise.
(dtrace_compile_to_ax): Likewise.
(dtrace_probe_destroy): Likewise.
(dtrace_gen_info_probes_table_header): Likewise.
(dtrace_gen_info_probes_table_values): Likewise.
(dtrace_probe_is_enabled): Likewise.
(dtrace_probe_ops): New variable.
(info_probes_dtrace_command): New function.
(_initialize_dtrace_probe): Likewise.
(dtrace_type_name): Likewise.
Add a struct to describe the branch trace configuration and use it for
enabling branch tracing.
The user will be able to set configuration fields for each tracing format
to be used for new threads.
The actual configuration that is active for a given thread will be shown
in the "info record" command.
At the moment, the configuration struct only contains a format field
that is set to the only available format.
The format is the only configuration option that can not be set via set
commands. It is given as argument to the "record btrace" command when
starting recording.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (XMLFILES): Add btrace-conf.dtd.
* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
(x86_linux_btrace_conf): New.
(x86_linux_create_target): Initialize to_btrace_conf.
* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
Check format. Split into this and ...
(linux_enable_bts): ... this.
(linux_btrace_conf): New.
(perf_event_skip_record): Renamed into ...
(perf_event_skip_bts_record): ... this. Updated users.
(linux_disable_btrace): Split into this and ...
(linux_disable_bts): ... this.
(linux_read_btrace): Check format.
* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
(linux_btrace_conf): New.
(btrace_target_info)<ptid>: Moved.
(btrace_target_info)<conf>: New.
(btrace_target_info): Split into this and ...
(btrace_tinfo_bts): ... this. Updated users.
* btrace.c (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
(btrace_conf_children, btrace_conf_attributes)
(btrace_conf_elements): New.
* btrace.h (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf): New.
* common/btrace-common.h (btrace_config): New.
* feature/btrace-conf.dtd: New.
* record-btrace.c (record_btrace_conf): New.
(record_btrace_cmdlist): New.
(record_btrace_enable_warn, record_btrace_open): Pass
&record_btrace_conf.
(record_btrace_info): Print recording format.
(cmd_record_btrace_bts_start): New.
(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
(_initialize_record_btrace): Add "record btrace bts" subcommand.
Add "record bts" alias command.
* remote.c (remote_state)<btrace_config>: New.
(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
(remote_protocol_features): Add qXfer:btrace-conf:read.
(remote_open_1): Call remote_btrace_reset.
(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
(btrace_target_info)<conf>: New.
(btrace_sync_conf, btrace_read_config): New.
(remote_enable_btrace): Update parameters. Call btrace_sync_conf and
btrace_read_conf.
(remote_btrace_conf): New.
(init_remote_ops): Initialize to_btrace_conf.
(_initialize_remote): Add qXfer:btrace-conf packet.
* target.c (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
* target.h (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
(target_ops)<to_enable_btrace>: Update parameters and comment.
(target_ops)<to_btrace_conf>: New.
* target-delegates: Regenerate.
* target-debug.h (target_debug_print_const_struct_btrace_config_p)
(target_debug_print_const_struct_btrace_target_info_p): New.
NEWS: Announce new command and new packet.
doc/
* gdb.texinfo (Process Record and Replay): Describe the "record
btrace bts" command.
(General Query Packets): Describe qXfer:btrace-conf:read packet.
(Branch Trace Configuration Format): New.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Update parameters.
(linux_low_btrace_conf): New.
(linux_target_ops)<to_btrace_conf>: Initialize.
* server.c (current_btrace_conf): New.
(handle_btrace_enable): Rename to ...
(handle_btrace_enable_bts): ... this. Pass ¤t_btrace_conf
to target_enable_btrace. Update comment. Update users.
(handle_qxfer_btrace_conf): New.
(qxfer_packets): Add btrace-conf entry.
(handle_query): Report qXfer:btrace-conf:read as supported packet.
* target.h (target_ops)<enable_btrace>: Update parameters and comment.
(target_ops)<read_btrace_conf>: New.
(target_enable_btrace): Update parameters.
(target_read_btrace_conf): New.
testsuite/
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
Add a structure to hold the branch trace data and an enum to describe
the format of that data. So far, only BTS is supported. Also added
a NONE format to indicate that no branch trace data is available.
This will make it easier to support different branch trace formats in
the future.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (SFILES): Add common/btrace-common.c.
(COMMON_OBS): Add common/btrace-common.o.
(btrace-common.o): Add build rules.
* btrace.c (parse_xml_btrace): Update parameters.
(parse_xml_btrace_block): Set format field.
(btrace_add_pc, btrace_fetch): Use struct btrace_data.
(do_btrace_data_cleanup, make_cleanup_btrace_data): New.
(btrace_compute_ftrace): Split into this and...
(btrace_compute_ftrace_bts): ...this.
(btrace_stitch_trace): Split into this and...
(btrace_stitch_bts): ...this.
* btrace.h (parse_xml_btrace): Update parameters.
(make_cleanup_btrace_data): New.
* common/btrace-common.c: New.
* common/btrace-common.h: Include common-defs.h.
(btrace_block_s): Update comment.
(btrace_format): New.
(btrace_format_string): New.
(btrace_data_bts): New.
(btrace_data): New.
(btrace_data_init, btrace_data_fini, btrace_data_empty): New.
* remote.c (remote_read_btrace): Update parameters.
* target.c (target_read_btrace): Update parameters.
* target.h (target_read_btrace): Update parameters.
(target_ops)<to_read_btrace>: Update parameters.
* x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
* target-delegates.c: Regenerate.
* target-debug (target_debug_print_struct_btrace_data_p): New.
* nat/linux-btrace.c (linux_read_btrace): Split into this and...
(linux_read_bts): ...this.
* nat/linux-btrace.h (linux_read_btrace): Update parameters.
gdbserver/
* Makefile.in (SFILES): Add common/btrace-common.c.
(OBS): Add common/btrace-common.o.
(btrace-common.o): Add build rules.
* linux-low: Include btrace-common.h.
(linux_low_read_btrace): Use struct btrace_data. Call
btrace_data_init and btrace_data_fini.
gdb/
2015-01-22 Eli Zaretskii <eliz@gnu.org>
* Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
(ALLDEPFILES): Remove irix5-nat.c. These two are part of the
reason that "make TAGS" is broken.
This patch moves the shared code present on
gdb/linux-nat.c:linux_nat_create_inferior and
gdb/gdbserver/linux-low.c:linux_create_inferior to
nat/linux-personality.c. This code is responsible for disabling
address space randomization based on user setting, and using
<sys/personality.h> to do that. I decided to put the prototype of the
maybe_disable_address_space_randomization on nat/linux-osdata.h
because it seemed the best place to put it.
I regression-tested this patch on Fedora 20 x86_64, and found no
regressions.
gdb/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
(linux-personality.o): New rule.
* common/common-defs.h: Include <stdint.h>.
* config/aarch64/linux.mh (NATDEPFILES): Include
linux-personality.o.
* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
* config/arm/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* config/i386/linux.mh (NATDEPFILES): Likewise.
* config/ia64/linux.mh (NATDEPFILES): Likewise.
* config/m32r/linux.mh (NATDEPFILES): Likewise.
* config/m68k/linux.mh (NATDEPFILES): Likewise.
* config/mips/linux.mh (NATDEPFILES): Likewise.
* config/pa/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
* config/s390/linux.mh (NATDEPFILES): Likewise.
* config/sparc/linux64.mh (NATDEPFILES): Likewise.
* config/sparc/linux.mh (NATDEPFILES): Likewise.
* config/tilegx/linux.mh (NATDEPFILES): Likewise.
* config/xtensa/linux.mh (NATDEPFILES): Likewise.
* defs.h: Remove #include <stdint.h> (moved to
common/common-defs.h).
* linux-nat.c: Include nat/linux-personality.h. Remove #include
<sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
nat/linux-personality.c).
(linux_nat_create_inferior): Remove code to disable address space
randomization (moved to nat/linux-personality.c). Create cleanup
to disable address space randomization.
* nat/linux-personality.c: New file.
* nat/linux-personality.h: Likewise.
gdb/gdbserver/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add linux-personality.c.
(linux-personality.o): New rule.
* configure.srv (srv_linux_obj): Add linux-personality.o to the
list of objects to be built.
* linux-low.c: Include nat/linux-personality.h.
(linux_create_inferior): Remove code to disable address space
randomization (moved to ../nat/linux-personality.c). Create
cleanup to disable address space randomization.
This patch moves safe_strerror from the gdb/{posix,mingw}-hdep.c files
to the respective common/{posix,mingw}-strerror.c files. This is a
preparation for the next patch, which shares a common code (to disable
address space randomization when creating a new inferior).
The patch has been regtested on Fedora 20 x86_64, and no regressions
were found.
gdb/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
common/posix-strerror.c.
(posix-strerror.o): New rule.
(mingw-strerror.o): Likewise.
* common/common-utils.h (safe_strerror): Move prototype to here,
from utils.h.
* common/common.host: New file.
* common/mingw-strerror.c: Likewise.
* common/posix-strerror.c: Likewise.
* configure: Regenerated.
* configure.ac: Source common/common.host. Add variable
common_host_obs to gdb_host_obs.
* contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
gdb/common/posix-strerror.c when warning about the use of
strerror.
* mingw-hdep.c (safe_strerror): Remove definition; move it to
common/mingw-strerror.c.
* posix-hdep.c (safe_strerror): Remove definition; move it to
common/posix-hdep.c.
* utils.h (safe_strerror): Remove prototype; move to
common/common-utils.h.
gdb/gdbserver/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (posix-strerror.o): New rule.
(mingw-strerror.o): Likewise.
* configure: Regenerated.
* configure.ac: Source file ../common/common.host. Initialize new
variable srv_host_obs. Add srv_host_obs to GDBSERVER_DEPFILES.
This patch is to teach both GDB and GDBServer to detect 64-bit inferior
correctly. We find a problem that GDBServer is unable to detect on a
e5500 core processor. Current GDBServer assumes that MSR is a 64-bit
register, but MSR is a 32-bit register in Book III-E. This patch is
to fix this problem by checking the right bit in MSR, in order to handle
both Book III-S and Book III-E. In order to detect Book III-S and
Book III-E, we check the PPC_FEATURE_BOOKE from the host's HWCAP (by
getauxval on glibc >= 2.16. If getauxval doesn't exist, we implement
the fallback by parsing /proc/self/auxv), because it should an invariant
on the same machine cross different processes.
In order to share code, I add nat/ppc-linux.c for both GDB and
GDBserver side.
gdb:
2015-01-14 Yao Qi <yao@codesourcery.com>
* Makefile.in (ppc-linux.o): New rule.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
* configure.ac: AC_CHECK_FUNCS(getauxval).
* config.in: Re-generated.
* configure: Re-generated.
* nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
Declare.
* nat/ppc-linux.c: New file.
* ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
Call ppc64_64bit_inferior_p.
gdb/gdbserver:
2015-01-14 Yao Qi <yao@codesourcery.com>
* Makefile.in (SFILES): Add nat/ppc-linux.c.
(ppc-linux.o): New rule.
* configure.srv (powerpc*-*-linux*): Add ppc-linux.o.
* configure.ac: AC_CHECK_FUNCS(getauxval).
* config.in: Re-generated.
* configure: Re-generated.
* linux-ppc-low.c (ppc_arch_setup) [__powerpc64__]: Call
ppc64_64bit_inferior_p
When I use PPC_FEATURE_BOOKE in GDBserver, I find it is defined in GDB
but not in GDBserver. After taking a further look, I find some macros
are duplicated between ppc-linux-nat.c and linux-ppc-low.c, so this
patch is to move them into nat/ppc-linux.h.
gdb/gdbserver:
2015-01-14 Yao Qi <yao@codesourcery.com>
* linux-ppc-low.c: Include "nat/ppc-linux.h".
(PPC_FEATURE_HAS_VSX): Move to nat/ppc-linux.h.
(PPC_FEATURE_HAS_ALTIVEC, PPC_FEATURE_HAS_SPE): Likewise.
(PT_ORIG_R3, PT_TRAP): Likewise.
(PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
(PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
(PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
gdb:
2015-01-14 Yao Qi <yao@codesourcery.com>
* ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
nat/ppc-linux.h.
(PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
(PPC_FEATURE_HAS_DFP): Likewise.
(PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
(PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
(PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
Include "nat/ppc-linux.h".
* nat/ppc-linux.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
The #line directives within GDB's autogenerated yacc files (e.g.
c-exp.c) are being incorrectly munged, causing these directives to refer
to nonexistent source files, e.g.
#line 36 "/home/patrick/binutils-gdb/gdb//home/patrick/binutils-gdb/gdb/c-exp.y"
as opposed to
#line 36 "/home/patrick/binutils-gdb/gdb/c-exp.y"
The munging happens due to a sed expression added by commit 954d8cae
whose intended purpose[1] was to work around the fact that ylwrap emitted #line
directives without any directory information, e.g.
#line 36 "c-exp.y"
So the sed expression was meant to munge such directives to refer to
absolute paths instead. But the behavior of ylwrap was changed some
years ago[2] to emit absolute paths within #line directives. And when
our local copy of ylwrap was synced by commit e30465112, the sed
expression in question became unnecessary, and indeed harmful.
This patch removes the now-obsolete sed expression. The emitted #line
directives are now correct without it.
gdb/ChangeLog:
* Makefile.in (.y.c): Don't munge yacc's #line
directives.
[1]: https://sourceware.org/ml/gdb-patches/2010-11/msg00265.html
[2]: http://git.savannah.gnu.org/cgit/automake.git/commit/lib/ylwrap?id=b6359a5f3
This patch is to add SDE OS ABI support in GDB, which has been used in
codesourcery gdb tree for some years.
gdb:
2014-12-19 Maciej W. Rozycki <macro@codesourcery.com>
Nigel Stephens <nigel@mips.com>
Chris Dearman <chris@mips.com>
Luis Machado <lgustavo@codesourcery.com>
* Makefile.in (ALL_TARGET_OBS): Add mips-sde-tdep.o.
(ALLDEPFILES): Add mips-sde-tdep.c.
* mips-sde-tdep.c: New file containg SDE specific code.
* configure.tgt (mips*-sde*-elf*): Add mips-sde-dep.o to
gdb_target_obs.
* defs.h (gdb_osabi): Add GDB_OSABI_SDE.
* osabi.c (gdb_osabi_names): Add SDE.
* NEWS: Mention the change.
This final patch adds the new "compile" command and subcommands, and
all the machinery needed to make it work.
A shared library supplied by gcc is used for all communications with
gcc. Types and most aspects of symbols are provided directly by gdb
to the compiler using this library.
gdb provides some information about the user's code using plain text.
Macros are emitted this way, and DWARF location expressions (and
bounds for VLA) are compiled to C code.
This hybrid approach was taken because, on the one hand, it is better
to provide global declarations and such on demand; but on the other
hand, for local variables, translating DWARF location expressions to C
was much simpler than exporting a full compiler API to gdb -- the same
result, only easier to implement, understand, and debug.
In the ordinary mode, the user's expression is wrapped in a dummy
function. After compilation, gdb inserts the resulting object code
into the inferior, then calls this function.
Access to local variables is provided by noting which registers are
used by location expressions, and passing a structure of register
values into the function. Writes to registers are supported by
copying out these values after the function returns.
This approach was taken so that we could eventually implement other
more interesting features based on this same infrastructure; for
example, we're planning to investigate inferior-side breakpoint
conditions.
gdb/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Update.
* symtab.h (struct symbol_computed_ops) <generate_c_location>: New
field.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_get_compile_instance,
la_compute_program>: New fields.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* jv-lang.c (java_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* dwarf2loc.h (dwarf2_compile_property_to_c): Declare.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): New
functions.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum compile_i_scope_types): New.
(enum command_control_type) <compile_control>: New constant.
(struct command_line) <control_u>: New field.
* d-lang.c (d_language_defn): Update.
* compile/compile.c: New file.
* compile/compile-c-support.c: New file.
* compile/compile-c-symbols.c: New file.
* compile/compile-c-types.c: New file.
* compile/compile.h: New file.
* compile/compile-internal.h: New file.
* compile/compile-loc2c.c: New file.
* compile/compile-object-load.c: New file.
* compile/compile-object-load.h: New file.
* compile/compile-object-run.c: New file.
* compile/compile-object-run.h: New file.
* cli/cli-script.c (multi_line_command_p, print_command_lines)
(execute_control_command, process_next_line)
(recurse_read_control_structure): Handle compile_control.
* c-lang.h (c_get_compile_context, c_compute_program): Declare.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-lang.c (ada_language_defn): Update.
* Makefile.in (SUBDIR_GCC_COMPILE_OBS, SUBDIR_GCC_COMPILE_SRCS):
New variables.
(SFILES): Add SUBDIR_GCC_COMPILE_SRCS.
(HFILES_NO_SRCDIR): Add compile.h.
(COMMON_OBS): Add SUBDIR_GCC_COMPILE_OBS.
(INIT_FILES): Add SUBDIR_GCC_COMPILE_SRCS.
(compile.o, compile-c-types.o, compile-c-symbols.o)
(compile-object-load.o, compile-object-run.o, compile-loc2c.o)
(compile-c-support.o): New targets.
gdb/doc/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Altering): Update.
(Compiling and Injecting Code): New node.
gdb/testsuite/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* configure.ac: Add gdb.compile/.
* configure: Regenerate.
* gdb.compile/Makefile.in: New file.
* gdb.compile/compile-ops.exp: New file.
* gdb.compile/compile-ops.c: New file.
* gdb.compile/compile-tls.c: New file.
* gdb.compile/compile-tls.exp: New file.
* gdb.compile/compile-constvar.S: New file.
* gdb.compile/compile-constvar.c: New file.
* gdb.compile/compile-mod.c: New file.
* gdb.compile/compile-nodebug.c: New file.
* gdb.compile/compile-setjmp-mod.c: New file.
* gdb.compile/compile-setjmp.c: New file.
* gdb.compile/compile-setjmp.exp: New file.
* gdb.compile/compile-shlib.c: New file.
* gdb.compile/compile.c: New file.
* gdb.compile/compile.exp: New file.
* lib/gdb.exp (skip_compile_feature_tests): New proc.
This commit does most of the mechanical removal. IOW, the easy part.
procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h. Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.
Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them. That can always be
done on a separate pass, preferably by someone who can test on alpha.
A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better. We can revisit those when we next need to touch that
code.
I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration alpha-unknown-osf3 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `build-osf'
make: *** [all] Error 2
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
solib-osf.c.
* NEWS: Mention that support for alpha*-*-osf* has been removed.
* ada-lang.h [__alpha__ && __osf__]
(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
GDB_OSABI_OSF1.
* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
files.
* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
* configure: Regenerate.
* configure.ac: Remove references to osf.
* configure.host: Handle alpha*-*-osf* in the obsolete hosts
section. Remove all other references to osf.
* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
Remove all other references to osf.
* dec-thread.c: Delete file.
* defs.h (GDB_OSABI_OSF1): Delete.
* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
defined.
* osabi.c (gdb_osabi_names): Delete "OSF/1".
* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
Delete code.
(unconditionally_kill_inferior)
[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
* solib-osf.c: Delete file.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.
gdb/doc/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
(SVR4 Process Information): Delete mention of OSF/1.
This does most of the mechanical removal. IOW, the easy part.
This doesn't touch procfs.c as that'd be a harder excision,
potentially affecting Solaris.
mips-tdep.c is left alone. E.g., I didn't delete the GDB_OSABI_IRIX
enum value, nor references to it in mips-tdep.c. Some comments
mentioning IRIX ABIs may still be relevant and I wouldn't know what to
do with them. in That can always be done on a separate pass,
preferably by someone who can test on MIPS.
I didn't remove a reference to IRIX in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=mips-sgi-irix6 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration mips-sgi-irix6 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `/home/pedro/gdb/mygit/build-irix'
make: *** [all] Error 2
gdb/
2014-10-10 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Remove mips-irix-tdep.o and solib-irix.o.
(ALLDEPFILES): Remove mips-irix-tdep.c and solib-irix.c.
(HFILES_NO_SRCDIR): Remove solib-irix.h.
* NEWS: Mention that support for mips-sgi-irix5* mips-sgi-irix6*
and been removed.
* config/mips/irix5.mh, config/mips/irix6.mh: Delete files.
* configure.ac: Remove references to IRIX.
* configure.host: Add *-*-irix* to the obsolete hosts section.
Remove all other references to irix.
* irix5-nat.c, mips-irix-tdep.c, solib-irix.c, solib-irix.h:
Delete files.
gdb/testsuite/
2014-10-10 Pedro Alves <palves@redhat.com>
* gdb.base/bigcore.exp: Remove references to IRIX.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/mips_pro.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
This creates a new version of the FreeBSD core file note generation
logic in the new target-dependent file "fbsd-tdep.c". The new version
is mostly copied from "fbsd-nat.c", but uses the iterator instead of
regset_from_core_section and defines fbsd_make_corefile_notes as a
gdbarch method instead of a target method.
Consecutive architecture-dependent changes exploit the new version,
migrating away from the target method. When all FreeBSD targets are
changed, the target method can go away.
gdb/ChangeLog:
* fbsd-tdep.c: New file.
* fbsd-tdep.h: New file.
* Makefile.in (ALL_TARGET_OBS): Add fbsd-tdep.o.
(HFILES_NO_SRCDIR): Add fbsd-tdep.h.
(ALLDEPFILES): Add fbsd-tdep.c.
This introduces common-regcache.h. This contains two functions that
allow nat/linux-btrace.c to be simplified. A better long term
solution would be unify the regcache code, but this is sufficient for
now.
gdb/ChangeLog:
* common/common-regcache.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-regcache.h.
* regcache.h: Include common-regcache.h.
(regcache_read_pc): Don't declare.
* regcache.c (get_thread_regcache_for_ptid): New function.
* nat/linux-btrace.c: Don't include regcache.h.
Include common-regcache.h.
(perf_event_read_bts): Use get_thread_regcache_for_ptid.
gdb/gdbserver/ChangeLog:
* regcache.h: Include common-regcache.h.
(regcache_read_pc): Don't declare.
* regcache.c (get_thread_regcache_for_ptid): New function.
This introduces common/symbol.h. This file declares a function that
the shared code can use and that the clients must implement. It also
changes some shared code to use these functions.
gdb/ChangeLog:
* common/symbol.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/symbol.h.
* minsyms.c (find_minimal_symbol_address): New function.
* common/agent.c: Include common/symbol.h.
[!GDBSERVER]: Don't include objfiles.h.
(agent_look_up_symbols): Use find_minimal_symbol_address.
gdb/gdbserver/ChangeLog:
* symbol.c: New file.
* Makefile.in (SFILES): Add symbol.c.
(OBS): Add symbol.o.
This introduces target/target.h. This file declares some functions
that the shared code can use and that clients must implement. It also
changes some shared code to use these functions.
gdb/ChangeLog:
* target/target.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add target/target.h.
* target.h: Include target/target.h.
(target_read_memory, target_write_memory): Don't declare.
* target.c (target_read_uint32): New function.
* common/agent.c: Include target/target.h.
[!GDBSERVER]: Don't include target.h.
(helper_thread_id): Type changed to uint32_t.
(agent_get_helper_thread_id): Use target_read_uint32.
(agent_run_command): Always use target_read_memory and
target_write_memory.
(agent_capability): Type changed to uint32_t.
(agent_capability_check): Use target_read_uint32.
gdb/gdbserver/ChangeLog:
* target.h: Include target/target.h.
* target.c (target_read_memory, target_read_uint32)
(target_write_memory): New functions.
This commit renames nine files that contain code used by both 32- and
64-bit Intel ports such that their names are prefixed with "x86"
rather than "i386". All types, functions and variables within these
files are likewise renamed such that their names are prefixed with
"x86" rather than "i386". This makes GDB follow the convention used
by gdbserver such that 32-bit Intel code lives in files called
"i386-*", 64-bit Intel code lives in files called "amd64-*", and code
for both 32- and 64-bit Intel lives in files called "x86-*".
This commit only renames OS-independent files. The Linux ports of
both GDB and gdbserver now follow the i386/amd64/x86 convention fully.
Some ports still use the old convention where "i386" in file/function/
type/variable names can mean "32-bit only" or "32- and 64-bit" but I
don't want to touch ports I can't fully test except where absolutely
necessary.
gdb/ChangeLog:
* i386-nat.h: Renamed as...
* x86-nat.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* i386-nat.c: Renamed as...
* x86-nat.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* common/i386-xstate.h: Renamed as...
* common/x86-xstate.h: New file. All type, function and variable
name prefixes changed from "i386_" to "x86_". All references
updated.
* nat/i386-cpuid.h: Renamed as...
* nat/x86-cpuid.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* nat/i386-gcc-cpuid.h: Renamed as...
* nat/x86-gcc-cpuid.h: New file. All type, function and variable
name prefixes changed from "i386_" to "x86_". All references
updated.
* nat/i386-dregs.h: Renamed as...
* nat/x86-dregs.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* nat/i386-dregs.c: Renamed as...
* nat/x86-dregs.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
gdb/gdbserver/ChangeLog:
* i386-low.h: Renamed as...
* x86-low.h: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
* i386-low.c: Renamed as...
* x86-low.c: New file. All type, function and variable name
prefixes changed from "i386_" to "x86_". All references updated.
This commit creates a new file, common/gdb_setjmp.h, to hold some
portability macros for setjmp/longjmp et al. that are used by the
exceptions subsystem and by the demangler crash catcher.
gdb/ChangeLog:
* common/gdb_setjmp.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_setjmp.h.
* configure.ac: Move sigsetjmp check...
* common/common.m4: ...here.
* configure: Regenerate.
* cp-support.c (SIGJMP_BUF): Delete.
(SIGSETJMP): Likewise.
(SIGLONGJMP): Likewise.
* exceptions.h (gdb_setjmp.h): Include.
(setjmp.h): Do not include.
(EXCEPTIONS_SIGJMP_BUF): Delete.
(EXCEPTIONS_SIGSETJMP): Likewise.
(EXCEPTIONS_SIGLONGJMP): Likewise.
Replace all uses of EXCEPTIONS_SIG* macros with SIG* macros
from gdb_setjmp.h.
* exceptions.c: Likewise.
gdb/gdbserver/ChangeLog:
* config.in: Regenerate.
* configure: Likewise.
This commit moves cleanups.[ch] into gdb/common/. The only change to
the content of the files is that cleanups.c's include list was altered
to match its new location.
gdb/ChangeLog:
* cleanups.h: Moved to...
* common/cleanups.h: New file.
* cleanups.c: Moved to...
* common/cleanups.c: New file. Include common-defs.h and
cleanups.h. Do not include defs.h.
* Makefile.in (SFILES): Replace cleanups.c with common/cleanups.c.
(HFILES_NO_SRCDIR): Replace cleanups.h with common/cleanups.h.
(cleanups.o): New rule.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Add common/cleanups.c.
(OBS): cleanups.o.
(cleanups.o): New rule.
This integrates Jan Kratochvil's nice race reproducer from PR
testsuite/12649 into the testsuite infrustructure directly.
With this, one only has to do either 'make check-read1' or 'make check
READ1="1"' to preload the read1.so library into expect.
Currently only enabled for glibc/GNU systems, and if
build==host==target.
gdb/testsuite/ChangeLog:
* Makefile.in (EXTRA_RULES, CC): New variables, get from
configure.
(EXPECT): Handle READ1 being set.
(all): Depend on EXTRA_RULES.
(check-read1, expect-read1, read1.so, read1): New rules.
* README (Testsuite Parameters): Document the READ1 make variable.
(Race detection): New section.
* configure: Regenerate.
* configure.ac: If build==host==target, and running under a
GNU/glibc system, add read1 to the extra Makefile rules.
(EXTRA_RULES): AC_SUBST it.
* lib/read1.c: New file.
gdb/ChangeLog:
* Makefile.in (check-read1): New rule.
This introduces common-debug.h. This holds the functions debug_printf
and debug_vprintf, two functions that the common code can use to print
debugging messages. Clients of the common code are expected to
implement debug_vprintf; a debug_vprintf function is written from
scratch for GDB, and gdbserver's existing debug_printf is repurposed
as debug_vprintf.
common/agent.c is changed to use debug_vprintf rather than
defining the macro DEBUG_AGENT depending on GDBSERVER.
nat/i386-dregs.c is changed to use the externally-implemented
debug_printf, rather than defining it itself.
gdb/ChangeLog:
* common/common-debug.h: New file.
* common/common-debug.c: Likewise.
* debug.c: Likewise.
* Makefile.in (SFILES): Add common/common-debug.c.
(HFILES_NO_SRCDIR): Add common/common-debug.h.
(COMMON_OBS): Add common-debug.o and debug.o.
(common-debug.o): New rule.
* common/common-defs.h: Include common-debug.h.
* common/agent.c (debug_agent_printf): New function.
(DEBUG_AGENT): Redefine.
* nat/i386-dregs.c (debug_printf): Undefine.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Add common/common-debug.c.
(OBS): Add common-debug.o.
(common-debug.o): New rule.
* debug.h (debug_printf): Don't declare.
* debug.c (debug_printf): Renamed and rewritten as...
(debug_vprintf): New function.
This introduces common-types.h. This file defines various standard
types used by gdb and gdbserver.
Currently these types are conditionally defined based on GDBSERVER.
The long term goal is to remove all such tests; however, this is
difficult as currently gdb uses definitions from BFD. In the meantime
this is still a step in the right direction.
gdb/ChangeLog:
* common/common-types.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-types.h.
* common/common-defs.h: Include common-types.h.
* defs.h (gdb_byte, CORE_ADDR, CORE_ADDR_MAX, LONGEST)
(ULONGEST): Remove.
gdb/gdbserver/ChangeLog:
* server.h: Add static assertion.
(gdb_byte, CORE_ADDR, LONGEST, ULONGEST): Remove.
This introduces common/errors.h. This holds some error- and warning-
related declarations that can be used by the code in common, nat and
target. Some of the declared functions must be provided by the client
as documented by the header file comments.
gdb/ChangeLog:
* common/errors.h: New file.
* common/errors.c: Likewise.
* Makefile.in (SFILES): Add common/errors.c.
(HFILES_NO_SRCDIR): Add common/errors.h.
(COMMON_OBS): Add errors.o.
(errors.o): New rule.
* common/common-defs.h: Include errors.h.
* utils.h (perror_with_name, error, verror, warning, vwarning):
Don't declare.
* common/common-utils.h: (malloc_failure, internal_error):
Likewise.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Add common/errors.c.
(OBS): Add errors.o.
(IPA_OBS): Add errors-ipa.o.
(errors.o): New rule.
(errors-ipa.o): Likewise.
* utils.h (perror_with_name, error, warning): Don't declare.
* utils.c (warning): Renamed and rewritten as...
(vwarning): New function.
(error): Renamed and rewritten as...
(verror): New function.
(internal_error): Renamed and rewritten as...
(internal_verror): New function.
This commit creates a new header, common/common-defs.h, to hold
definitions common to all code under gdb/. Both gdb/defs.h and
gdb/gdbserver/server.h are modified to include common-defs.h as
their first non-comment line; all code under gdb/ includes either
defs.h or server.h as appropriate, so common-defs.h will be the
first actual code the compiler sees.
For this initial commit common-defs.h includes only the two
config.h files. Future commits will move more code currently
duplicated across defs.h and server.h such that shared code in
gdb/{common,target,nat} can be modified to include common-defs.h
rather than defs.h or server.h.
gdb/
2014-07-30 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-defs.h.
* defs.h: Include common-defs.h.
Do not include config.h or build-gnulib/config.h.
gdb/gdbserver/
2014-07-30 Gary Benson <gbenson@redhat.com>
* server.h: Include common-defs.h.
Do not include config.h or build-gnulib-gdbserver/config.h.
gdb/
2014-06-05 Iain Buclaw <ibuclaw@gdcproject.org>
* Makefile.in (SFILES): Add d-exp.y.
(YYFILES): Add d-exp.c.
(YYOBJ): Add d-exp.o.
(local-maintainer-clean): Delete d-exp.c.
* d-exp.y: New file.
* d-lang.h (d_parse): New declaration.
(d_error): New declaration.
* d-lang.c (d_op_print_tab): Add entry for BINOP_CONCAT and BINOP_EXP.
Set BINOP_EQUAL and BINOP_NOTEQUAL to same precedence as other
PREC_ORDER operators.
(d_language_defn): Use d_parse, d_error instead of c_parse, c_error.
gdb/testsuite/
2014-06-05 Iain Buclaw <ibuclaw@gdcproject.org>
* gdb.dlang/expression.exp: New file.
Gary Benson
H.J. Lu
Sasha Smundak
James Bowman
Jan Kratochvil
Sergio Durigan Junior
Mark Kettenis
Pedro Alves
Jose E. Marchesi
Markus Metzger
Eli Zaretskii
Yao Qi
Patrick Palka
Joel Brobecker
Tom Tromey
Nick Bull
Doug Evans
Iain Buclaw
Andreas Arnez