While not allowed, this certainly shouldn't result in confusing the
programmer (by skipping lines in unexpected ways): Without returning,
demand_empty_rest_of_line() (at the end of the function) will demand
the _next_ line to be empty, and without the conditional we would
ignore the next line.
Some of the TC_START_LABEL implementations need to adjust the end of
the symbol, when a colon doesn't mean a label definition. That means
they need access to nul_char both the restore the NUL location (it may
be a quote rather than a colon) and to store the new nul_char. Others
need adjusting to step over a potential trailing quote.
PR gas/18581
* config/tc-aarch64.h (TC_START_LABEL): Redefine.
* config/tc-arm.c (tc_start_label_without_colon): Delete params.
Use input_line_pointer directly.
* config/tc-arm.h (TC_START_LABEL): Redefine.
(TC_START_LABEL_WITHOUT_COLON): Redefine.
(tc_start_label_without_colon): Update prototype.
* config/tc-bfin.c (bfin_start_label): Delete ptr param. Check
for NUL instead.
* config/tc-bfin.h (bfin_start_label): Update prototype.
(TC_START_LABEL): Redefine.
* config/tc-d30v.h (TC_START_LABEL): Redefine.
* config/tc-fr30.c (restore_colon): Rewrite.
(fr30_is_colon_insn): Add nul_char param. Return int. Bump
i_l_p over quote. Update restore_colon calls.
* config/tc-fr30.h (TC_START_LABEL): Redefine.
(fr30_is_colon_insn): Update prototype.
* config/tc-m32c.c (restore_colon, m32c_is_colon_insn): As above.
* config/tc-m32c.h (TC_START_LABEL): Redefine.
(m32c_is_colon_insn): Update prototype.
* config/tc-m32r.h (TC_START_LABEL): Redefine.
* config/tc-mep.h (TC_START_LABEL): Redefine.
* config/tc-nds32.h (TC_START_LABEL): Redefine.
* config/tc-tic54x.c (tic54x_start_label): Replace params with
nul_char and next_char. Step over trailing quote.
* config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Redefine.
(tic54x_start_label): Update prototype.
* read.c (TC_START_LABEL): Redefine. Update invocation.
(TC_START_LABEL_WITHOUT_COLON): Update invocation.
* config/tc-nios2.c (s_nios2_set): Save initial input_line_pointer
and restore if calling s_set. Don't restore delim again.
Tests that bfd_perform_reloc doesn't freak over a NONE reloc at end
of section.
gas/
* read.c (s_reloc): Match BFD_RELOC_NONE, BFD_RELOC{8,16,32,64}.
* write.c (get_frag_for_reloc): Allow match just past end of frag.
gas/testsuite/
* gas/all/none.s,
* gas/all/none.d: New test.
* gas/all/gas.exp: Run it.
When runtime patching code (like e.g. done by the Linux kernel) there
may be cases where the set of stack frame alterations differs between
unpatched and patched code. Consequently the corresponding unwind data
needs patching too. Locating the right places within an FDE, however,
is rather cumbersome without a way to insert labels in the resulting
section. Hence this patch introduces a new directive, .cfi_label. Note
that with the way CFI data gets emitted currently (at the end of the
assembly process) this can't support local FB- and dollar-labels.
gas/
2015-01-12 Jan Beulich <jbeulich@suse.com>
* gas/dw2gencfi.c (cfi_add_label, dot_cfi_label): New.
(cfi_pseudo_table): Add "cfi_label".
(output_cfi_insn): Handle CFI_label.
(select_cie_for_fde): Als terminate CIE when encountering
CFI_label.
* dw2gencfi.h (cfi_add_label): Declare.
(struct cfi_insn_data): New member "sym_name".
(CFI_label): New.
* read.c (read_symbol_name): Drop "static".
* read.h (read_symbol_name): Declare.
gas/testsuite/
2015-01-12 Jan Beulich <jbeulich@suse.com>
gas/cfi/cfi-label.d, gas/cfi/cfi-label.s: New.
gas/cfi/cfi.exp: Run new tests.
The C standard doesn't guarantee a function pointer can be cast to
void* and vice versa.
binutils/
* prdbg.c (print_debugging_info): Don't use void* for function
pointer param.
* budbg.h (print_debugging_info): Update prototype.
gas/
* read.c (s_altmacro, s_reloc): Make definition static.
The construct being added to the cond.s test case otherwise triggered
both the "missing closing ..." and the "stray ..." (twice) warnings in
_find_end_of_line(). As that code fragments suggests, this is needed to
support (include) files that can be used for both assembler .include
and compiler #include directives.
gas/
* read.c (assign_symbol): Don't force "set" symbols local for PE.
gas/testsuite/
* gas/pe/set.s, * gas/pe/set.d: New test.
* gas/pe/pe.exp: Run it.
* config/tc-arm.c (codecomposer_syntax): New flag that states whether the
CCS syntax compatibility mode is on or off.
(asmfunc_states): New enum to represent the asmfunc directive state.
(asmfunc_state): New variable holding the asmfunc directive state.
(comment_chars): Rename to arm_comment_chars.
(line_separator_chars): Rename to arm_line_separator_chars.
(s_ccs_ref): New function that handles the .ref directive.
(asmfunc_debug): New function.
(s_ccs_asmfunc): New function that handles the .asmfunc directive.
(s_ccs_endasmfunc): New function that handles the .endasmfunc directive.
(s_ccs_def): New function that handles the .def directive.
(tc_start_label_without_colon): New function.
(md_pseudo_table): Added new CCS directives.
(arm_ccs_mode): New function that handles the -mccs command line option.
(arm_long_opts): Added new -mccs command line option.
* config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro.
(TC_START_LABEL_WITHOUT_COLON): New macro.
(tc_start_label_without_colon): Added extern function declaration.
(tc_comment_chars): Define.
(tc_line_separator_chars): Define.
* app.c (do_scrub_begin): Use tc_line_separator_chars, if defined.
* read.c (read_begin): Likewise.
* doc/as.texinfo: Add documentation for the -mccs command line
option.
* doc/c-arm.texi: Likewise.
* doc/internals.texi: Document tc_line_separator_chars.
* NEWS: Mention the new feature.
* gas/arm/ccs.s: New test case.
* gas/arm/ccs.d: New expected disassembly.
* write.h (struct fix): Add fx_dot_frag field.
(dot_frag): Declare.
* write.c (dot_frag): New variable.
(fix_new_internal): Set fx_dot_frag field with dot_frag.
(fixup_segment): Base calculation of fx_offset with fx_dot_frag.
* expr.c (expr): Save value of frag_now in dot_frag when setting
dot_value.
* read.c (emit_expr): Likewise. Delete comments.
* config/obj-elf.h (obj_elf_vendor_attribute): ... here.
* read.c (potable): Remove "gnu_attribute".
(skip_whitespace, skip_past_char, skip_past_comma): Delete, move
to config/obj-elf.c.
(s_vendor_attribute): Delete, move to obj_elf_vendor_attribute
in config/obj-elf.c.
(s_gnu_attribute): Delete, move to obj_elf_gnu_attribute in
config/obj-elf.c.
* config/obj-elf.c (elf_pseudo_table): Add "gnu_attribute".
(skip_whitespace, skip_past_char, skip_past_comma): New, moved
from read.c.
(obj_elf_vendor_attribute): New, moved from s_vendor_attribute
in read.c.
(obj_elf_gnu_attribute): New, moved from s_gnu_attribute in
read.c.
* config/tc-arm.c (s_arm_eabi_attribute): Rename
s_vendor_attribute to obj_elf_vendor_attribute.
* config/tc-tic6x.c (s_tic6x_c6xabi_attribute): Likewise.
* input-scrub.c (input_scrub_include_sb): Use sb_build to
allocate sufficient space for from_sb. Use sb_terminate to
terminate string.
* read.c (read_a_source_file): Use sb_build to allocate
sufficient space and replace sb_add_string with sb_add_buffer.
(s_macro): Likewise.
(input_scrub_insert_line): Likewise.
(s_irp): Use sb_build to allocate sufficient space.
(do_repeat): Use sb_build to allocate sufficient space
for many.
* sb.c (sb_build): Remove static.
* sb.h (sb_build): New prototype.
Allows escape codes in names.
(s_comm_internal): Use read_symbol_name.
(s_globl, s_lsym, s_set, s_weakref): Likewise.
* doc/as.texinfo: Document support for multibyte characters in
symbol names.
* gas/elf/syms.s: New test - checks the generation of multibyte
symbol names.
* gas/elf/syms.d: New file - expected readelf output.
* gas/elf/elf.exp: Add syms.
* readelf.c (print_symbol): Display multibyte characters in symbol
names.
(process_section_headers): Use print_symbol.
* ld-ifunc/ifunc-13a-i386.s: Fix use of .global directive.
* ld-ifunc/ifunc-15a-i385.s: Likewise.
2012-03-12 Roland McGrath <mcgrathr@google.com>
* config/tc-arm.c (arm_frag_max_var): New function.
* config/tc-arm.h: Declare it.
(md_frag_max_var): New macro.
* config/tc-i386.c (i386_frag_max_var): New function.
* config/tc-i386.h: Declare it.
(md_frag_max_var): New macro.
* doc/as.texinfo (Bundle directives): New node.
(Pseudo Ops): Add it to the menu.
* NEWS: Mention new feature.
* read.c [md_frag_max_var] (HANDLE_BUNDLE): New macro.
[HANDLE_BUNDLE] (bundle_align_p2): New variable.
[HANDLE_BUNDLE] (bundle_lock_frchain, bundle_lock_frag): New variables.
[HANDLE_BUNDLE] (start_bundle, pending_bundle_size, finish_bundle):
New functions.
(assemble_one): New function if [HANDLE_BUNDLE], #define directly
to md_assembly if not.
(read_a_source_file): Call assemble_one in place of md_assemble.
(read_a_source_file) [HANDLE_BUNDLE]: Check for unterminated
.bundle_lock at end of processing.
[HANDLE_BUNDLE] (s_bundle_align_mode, s_bundle_lock, s_bundle_unlock):
New functions.
[HANDLE_BUNDLE] (potable): Add their entries.
* read.h: Declare new functions.
gas/testsuite/
2012-03-12 Roland McGrath <mcgrathr@google.com>
* gas/i386/bundle-bad.s: New file.
* gas/i386/bundle-bad.d: New file.
* gas/i386/bundle-bad.l: New file.
* gas/i386/i386.exp: Run it.
* gas/arm/bundle.s: New file.
* gas/arm/bundle.d: New file.
* gas/arm/bundle-lock.s: New file.
* gas/arm/bundle-lock.d: New file.
* gas/i386/bundle.s: New file.
* gas/i386/bundle.d: New file.
* gas/i386/x86-64-bundle.s: New file.
* gas/i386/x86-64-bundle.d: New file.
* gas/i386/bundle-lock.s: New file.
* gas/i386/bundle-lock.d: New file.
* gas/i386/i386.exp: Run them.
(dot_symbol_init): New prototype.
* symbols.c (dot_symbol): New variable.
(symbol_clone): Assert it's not dot_symbol being cloned.
(dot_symbol_init): New function.
(symbol_clone_if_forward_ref): Create a new temporary symbol
when trying to clone dot_symbol.
* expr.c (current_location): Refer to dot_symbol instead of
making a new temporary symbol.
* read.c (read_a_source_file): Update dot_symbol as we go.
* as.c (main): Call dot_symbol_init.
gas/
2010-04-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/11509
* config/tc-i386-intel.c (i386_intel_simplify_register): New.
(i386_intel_simplify): Use i386_is_register and
i386_intel_simplify_register. Set X_md for O_register and
check X_md for O_constant.
(i386_intel_operand): Use i386_is_register.
* config/tc-i386.c (i386_is_register): New.
(x86_cons): Initialize the X_md field. Use i386_is_register.
(parse_register): Use i386_is_register.
(tc_x86_parse_to_dw2regnum): Likewise.
gas/testsuite/
2010-04-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/11509
* gas/i386/equ.s: Add tests for ".equ symbol, reg + NUM".
* gas/i386/equ.d: Updated.
