This changes hppa-tdep.c to use the type-safe registry API.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* hppa-tdep.c (hppa_objfile_priv_data): Change type.
(hppa_init_objfile_priv_data, read_unwind_info)
(find_unwind_entry, _initialize_hppa_tdep): Update.
This changes elfread.c to use the type-safe registry API. This also
fixes a potential memory leak, by changing the hash table so that it
is no longer allocated on an obstack.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* elfread.c (elf_objfile_gnu_ifunc_cache_data): Change type.
(elf_gnu_ifunc_record_cache): Update. Don't allocate hash table
on obstack.
(elf_gnu_ifunc_resolve_by_cache, _initialize_elfread): Update.
This changes mdebugread.c to use the type-safe registry API.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* mdebugread.c (basic_type_data): Change type.
(basic_type, _initialize_mdebugread): Update.
This adds a no-op deleter, which is used in subsequent patches.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* common/gdb_unique_ptr.h (struct noop_deleter): New.
This changes the probes code in elfread.c to use the type-safe
registry API. While doing this, I saw that the caller of get_probes
owns the probes, so I went through the code and changed the vectors to
store unique_ptrs, making the ownership relationship more clear.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* symfile.h (struct sym_probe_fns) <sym_get_probes>: Change type.
* symfile-debug.c (debug_sym_get_probes): Change type.
* stap-probe.c (handle_stap_probe):
(stap_static_probe_ops::get_probes): Change type.
* probe.h (class static_probe_ops) <get_probes>: Change type.
* probe.c (class any_static_probe_ops) <get_probes>: Change type.
(parse_probes_in_pspace): Update.
(find_probes_in_objfile, find_probe_by_pc, collect_probes):
Update.
(any_static_probe_ops::get_probes): Change type.
* elfread.c (elfread_data): New typedef.
(probe_key): Change type.
(elf_get_probes): Likewise. Update.
(probe_key_free): Remove.
(_initialize_elfread): Update.
* dtrace-probe.c (class dtrace_static_probe_ops) <get_probes>:
Change type.
(dtrace_process_dof_probe, dtrace_process_dof)
(dtrace_static_probe_ops::get_probe): Change type.
This changes xcoffread.c to use the type-safe registry API. It also
renames coff_symfile_info to xcoff_symfile_info, to avoid any possible
ODR violation.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* xcoffread.c (struct xcoff_symfile_info): Rename from
coff_symfile_info. Add initializers.
(xcoff_objfile_data_key): Move lower. Change type.
(XCOFF_DATA): Rewrite.
(xcoff_free_info): Remove.
(xcoff_symfile_init, _initialize_xcoffread, read_xcoff_symtab)
(read_symbol, read_symbol_lineno, find_linenos, init_stringtab)
(xcoff_initial_scan): Update.
This changes solib-svr4y.c to use the type-safe registry API.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* solib-svr4.c (struct svr4_info): Add initializers and
destructor.
<probes_table>: Now an htab_up.
(solib_svr4_pspace_data): Change type.
(free_probes_table): Simplify.
(~svr4_info): Rename from svr4_pspace_data_cleanup.
(get_svr4_info, probes_table_htab_remove_objfile_probes)
(probes_table_remove_objfile_probes, register_solib_event_probe)
(solib_event_probe_at, svr4_update_solib_event_breakpoint)
(_initialize_svr4_solib): Update.
This changes remote.c to use the type-safe registry API.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* remote.c (remote_pspace_data): Change type.
(remote_pspace_data_cleanup): Remove.
(get_remote_exec_file, set_pspace_remote_exec_file)
(_initialize_remote): Update.
This changes breakpoint.c to use the type-safe registry API.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* breakpoint.c (breakpoint_objfile_key): Change type.
(get_breakpoint_objfile_data): Update.
(free_breakpoint_objfile_data): Remove.
(_initialize_breakpoint): Update.
This changes dwarf2_per_objfile to use the type-safe registry API.
This also changes dwarf2_per_objfile not to be allocated on an
obstack. It seemed clearer to me to simply allocate it on the heap;
and I didn't see a drawback from doing so.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* dwarf2read.h (struct dwarf2_per_objfile): Don't inherit from
allocate_on_obstack.
* dwarf2read.c (dwarf2_objfile_data_key): Change type.
(get_dwarf2_per_objfile): Update.
(set_dwarf2_per_objfile): Remove.
(dwarf2_has_info, dwarf2_get_section_info): Update.
(dwarf2_free_objfile): Remove.
(_initialize_dwarf2_read): Update.
This changes auto-load.c to use the type-safe registry API. It also
changes a couple of types to "bool", removing uses of "FALSE".
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* auto-load.c (struct auto_load_pspace_info): Add destructor and
initializers.
<unsupported_script_warning_printed,
script_not_found_warning_printed>: Now bool.
(auto_load_pspace_data): Change type.
(~auto_load_pspace_info): Rename from
auto_load_pspace_data_cleanup.
(get_auto_load_pspace_data, init_loaded_scripts_info)
(clear_section_scripts, maybe_print_unsupported_script_warning)
(maybe_print_script_not_found_warning, _initialize_auto_load):
Update.
This changes inflow.c to use the type-safe registry API. This fixes a
latent bug in swap_terminal_info, which previously said:
terminal_info *info_a
= (terminal_info *) inferior_data (a, inflow_inferior_data);
terminal_info *info_b
= (terminal_info *) inferior_data (a, inflow_inferior_data);
... both of which examine 'a'.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* inflow.c (struct terminal_info): Add destructor and
initializers.
(inflow_inferior_data): Change type.
(~terminal_info): Rename from inflow_inferior_data_cleanup.
(get_inflow_inferior_data, inflow_inferior_exit)
(swap_terminal_info, _initialize_inflow): Update.
This changes DECLARE_REGISTRY to add a type-safe interface. This
interface is a C++ class that handles the details of registering a
key, and provides various useful methods, including policy-based
cleanup.
gdb/ChangeLog
2019-05-08 Tom Tromey <tom@tromey.com>
* registry.h (DECLARE_REGISTRY): Define the _key class.
Commit 2e62ab400f added a second 'New commands' section to the NEWS
file, this commit merges the two together.
gdb/ChangeLog:
* NEWS: Merge two 'New commands' sections.
- set print frame-arguements all
- an Ada function named pck.call_me calls a C function named break_me
- you put a breakpoint in break_me and the program reaches this
breakpoint.
Now display the backtrace:
(gdb) bt
#0 break_me () at [...]
#1 0x000000000040243e in pck.call_me (
s={P_ARRAY = 0x7fffffffe21c, P_BOUNDS = 0x41e6e8}) at [...]
whereas we should expect:
(gdb) bt
#0 break_me () at [...]
#1 0x000000000040243e in pck.call_me (s="test") at [...]
The problem is that GDB prints the S parameter in the pck.call_me Ada
function using the current language, so the C one, because the program
is stopped in a C function, whereas it should use the pck.call_me frame
one. This behavior is ok when user manually changes the language but it's
not the right one when language is auto.
This patch fixes this problem so now when using auto language, all Ada
frame arguments are printed using Ada like syntax when the frame is part
of Ada code, even if the program is stopped in a frame using a different
language.
If the user explicitly sets a language (using "set language ...") then
no change here, all the Ada frame arguments are printed using this
language.
gdb/ChangeLog:
* ada-valprint.c (ada_val_print_gnat_array): Remove language
parameter and use Ada language definition instead.
(ada_val_print_ptr): Remove unused language parameter.
(ada_val_print_num): Remove language parameter and use Ada language
definition instead.
(ada_val_print_enum, ada_val_print_flt): Remove unused language
parameter.
(ada_val_print_struct_union, ada_val_print_ref): Remove language
parameter and use Ada language definition instead.
(ada_val_print_1): Update all ada_val_print_xxx calls.
Remove language parameter.
(ada_val_print): Update ada_val_print_1 call.
gdb/testsuite/ChangeLog:
* gdb.ada/frame_arg_lang.exp: New testcase.
* gdb.ada/frame_arg_lang/bla.adb: New file.
* gdb.ada/frame_arg_lang/pck.ads: New file.
* gdb.ada/frame_arg_lang/pck.adb: New file.
* gdb.ada/frame_arg_lang/foo.c: New file.
Tested on x86_64-linux, no regressions.
I noticed a three globals in remote.c that could be static. This
patch makes this change.
gdb/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* remote.c (remote_hw_watchpoint_limit)
(remote_hw_watchpoint_length_limit, remote_hw_breakpoint_limit):
Now static.
The "watchdog" global is only used in remote.c, so this patch moves it
there and makes it static.
gdb/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* maint.c (_initialize_maint_cmds): Move initialization code to
remote.c.
(watchdog, show_watchdog): Move to remote.c.
* remote.c (watchdog, show_watchdog): Move from maint.c. Make
"watchdog" static.
(_initialize_remote): Move initialization code from maint.c.
* defs.h (watchdog): Don't declare.
This moves the interpreter_p declaration from defs.h to main.h. I
think this makes more sense, as it is defined in main.c. Also, this
declaration was in the wrong place -- between a comment and the things
the comment described.
gdb/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* tui/tui-interp.c: Include main.h.
* interps.c: Include main.h.
* main.h (interpreter_p): Declare.
* defs.h (interpreter_p): Don't declare.
I noticed that read_unsigned_leb128 is declared in defs.h. There's no
reason this should be here, so this patch moves it to dwarf2read.h.
gdb/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* dwarf2loc.c: Include dwarf2read.h.
* defs.h (read_unsigned_leb128): Don't declare.
* dwarf2read.h (read_unsigned_leb128): Declare.
When merging commit 99f20f ("Fix style bug when paging") to master, I
had to make some changes to get it to compile again. Unfortunately, I
must not have added these to the index at the correct time, because
they were not committed.
This patch fixes the problem.
gdb/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* utils.c (fputs_maybe_filtered): Call can_emit_style_escape as a
method.
Philippe pointed out a styling bug that would occur in some conditions
when paging:
https://sourceware.org/ml/gdb-patches/2019-04/msg00101.html
I was finally able to reproduce this, and this patch fixes the bug.
The problem occurred when text overflowed the line, causing a
pagination prompt, but when no wrap column had been set. In this
case, the current style was reset to show the prompt, but then not
reset back to the previously applied style before emitting the rest of
the line.
The fix is to record the applied style in this case, and re-apply it
afterward -- but only if the pager prompt was emitted, something that
the existing style.exp pointed out on the first, more naive, version
of the patch.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* utils.c (fputs_maybe_filtered): Reset style after paging, even
when no wrap column is set.
A user here noticed that the Python Value.string method did not work
for Ada arrays. I tracked this down to an oddity in value_as_address
-- namely, it calls coerce_array, but that function will not force
array coercion when the language has c_style_arrays=false, as Ada
does.
This patch fixes the problem by changing c_get_string so that arrays
take the "in GDB's memory" branch. The actual patch is somewhat more
complicated than you might think, because the caller can request more
array elements than the type allows. This is normal when the type is
using the C struct hack.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* c-lang.c (c_get_string): Handle non-C-style arrays.
gdb/testsuite/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* gdb.python/py-value.exp (test_value_in_inferior): Add Ada test.
Consider this short C example:
struct inner
{
unsigned x;
unsigned y : 3;
unsigned z : 3;
};
struct outer
{
unsigned char o : 3;
struct inner i __attribute__ ((packed));
};
When I use "ptype/o" on this, I get:
(gdb) ptype/o struct outer
/* offset | size */ type = struct outer {
/* 0: 5 | 1 */ unsigned char o : 3;
/* XXX 5-bit hole */
/* 1 | 8 */ struct inner {
/* 1 | 4 */ unsigned int x;
/* 5:29 | 4 */ unsigned int y : 3;
/* 5:26 | 4 */ unsigned int z : 3;
/* XXX 2-bit padding */
/* XXX 3-byte padding */
/* total size (bytes): 8 */
} i;
/* total size (bytes): 9 */
}
In the location of "o" ("0: 5"), the "5" means "there are 5 bits left
relative to the size of the underlying type.
I find this very difficult to follow. On irc, Sergio said that this
choice came because it is what pahole does. However, I think it's not
very useful, and maybe is just an artifact of the way that
DW_AT_bit_offset was defined in DWARF 3.
This patch changes ptype/o to print the offset of a bitfield in a more
natural way, that is, using the bit number according to the platform's
bit numbering.
With this patch, the output is now:
(gdb) ptype/o struct outer
/* offset | size */ type = struct outer {
/* 0: 0 | 1 */ unsigned char o : 3;
/* XXX 5-bit hole */
/* 1 | 8 */ struct inner {
/* 1 | 4 */ unsigned int x;
/* 5: 0 | 4 */ unsigned int y : 3;
/* 5: 3 | 4 */ unsigned int z : 3;
/* XXX 2-bit padding */
/* XXX 3-byte padding */
/* total size (bytes): 8 */
} i;
/* total size (bytes): 9 */
}
This is better, IMO, because now the "offset" of a bitfield is
consistent with the offset of an ordinary member, referring to its
offset from the start of the structure.
gdb/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* typeprint.c (print_offset_data::update): Print the bit offset,
not the number of bits remaining.
gdb/doc/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* gdb.texinfo (Symbols): Document change to ptype/o.
gdb/testsuite/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* gdb.base/ptype-offsets.exp: Update tests.
I noticed that ptype/o will print:
/* 3: 3 | 1 */ signed char a4 : 2;
/* XXX 3-bit hole */
That is, "*/" at the end of the "hole" message does not line up with
the other comment ends. I thought it would be a bit nicer if this did
line up, so I fixed it. Then, to my surprise, I found that I could
not make ptype-offsets.exp fail.
I still am not sure why it doesn't fail, but changing the tests to use
string_to_regexp and changing the quoting helped. This in turn showed
that some of the existing test cases were wrong, so I've also updated
them here.
gdb/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* typeprint.c (print_offset_data::maybe_print_hole): Add extra
padding at end of comment.
gdb/testsuite/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* gdb.base/ptype-offsets.exp: Use string_to_regexp. Fix test
cases.
* gdb.base/ptype-offsets.cc (struct abc) <my_int_type>: Now
"short".
While looking at a different Ada problem, I found that printing a
record containing a VLA did not work properly.
I tracked the problem down to dwarf2_evaluate_property trying, and
failing, to compare two types that differed only in qualifiers.
This patch changes dwarf2_evaluate_property to ignore qualifiers when
comparing types.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* dwarf2loc.c (dwarf2_evaluate_property) <PROP_ADDR_OFFSET>:
Compare main types.
gdb/testsuite/ChangeLog
2019-05-08 Tom Tromey <tromey@adacore.com>
* gdb.ada/vla.exp: New file.
* gdb.ada/vla/vla.adb: New file.
For targets that treat addresses as signed (MIPS/SH64), user-specified
start/stop address limits cannot be compared directly to section VMAs.
We must sign-extend user-specified 32-bit address limits which have
bit 31 set for such targets.
binutils/
* objdump.c (sign_extend_address): New function.
(dump_bfd): Sign-extend user-specified start/stop addresses
for targets that need it.
* testsuite/binutils-all/objdump.exp: Add tests for objdump
with start and stop addresses in higher address ranges.
Make them work for tile, by using ".quad 0" as the simulated
instruction and doubling size of aligns. The larger aligns tripped
over riscv alignment handling, fixed by adding -mno-relax there.
Also disable link-relax for avr, pru and xtensa, allowing these
targets to pass these tests. With link-time relaxation enabled,
these targets emit alignment relocations rather than aligning at
assembly time. This means the assembler doesn't see a change in PC
when it is expected over an alignment frag and thus view numbers are
calculated incorrectly.
* testsuite/gas/elf/dwarf2-1.s,
* testsuite/gas/elf/dwarf2-2.s,
* testsuite/gas/elf/dwarf2-5.s,
* testsuite/gas/elf/dwarf2-7.s,
* testsuite/gas/elf/dwarf2-8.s,
* testsuite/gas/elf/dwarf2-9.s,
* testsuite/gas/elf/dwarf2-10.s,
* testsuite/gas/elf/dwarf2-11.s,
* testsuite/gas/elf/dwarf2-12.s,
* testsuite/gas/elf/dwarf2-13.s,
* testsuite/gas/elf/dwarf2-14.s,
* testsuite/gas/elf/dwarf2-15.s,
* testsuite/gas/elf/dwarf2-16.s,
* testsuite/gas/elf/dwarf2-17.s,
* testsuite/gas/elf/dwarf2-18.s,
* testsuite/gas/elf/dwarf2-19.s: Double size of align and simulated
instructions.
* testsuite/gas/elf/dwarf2-1.d,
* testsuite/gas/elf/dwarf2-2.d,
* testsuite/gas/elf/dwarf2-5.d,
* testsuite/gas/elf/dwarf2-7.d,
* testsuite/gas/elf/dwarf2-8.d,
* testsuite/gas/elf/dwarf2-9.d,
* testsuite/gas/elf/dwarf2-10.d,
* testsuite/gas/elf/dwarf2-11.d,
* testsuite/gas/elf/dwarf2-12.d,
* testsuite/gas/elf/dwarf2-13.d,
* testsuite/gas/elf/dwarf2-14.d,
* testsuite/gas/elf/dwarf2-15.d,
* testsuite/gas/elf/dwarf2-16.d,
* testsuite/gas/elf/dwarf2-17.d,
* testsuite/gas/elf/dwarf2-18.d,
* testsuite/gas/elf/dwarf2-19.d: Use xfail rather than notarget.
Remove avr, pru, tile, xtensa from xfails. Update expected output.
* testsuite/gas/elf/elf.exp: Sort targets.
(dump_opts): Pass {as -mno-relax} for riscv, {as -mno-link-relax}
for avr and pru, and {as --no-link-relax} for xtensa to dwarf tests.
* testsuite/gas/elf/section2.e-miwmmxt: Delete unused file.
md_begin happens after md_parse_option.
* config/tc-xtensa.c (opt_linkrelax): New variable.
(md_parse_option): Set it here.
(md_begin): Copy opt_linkrelax to linkrelax.
Expressions that compute view numbers that aren't simplified early
enough to a constant end up being selected for representation as
complex relocations, enabled on mep-* targets.
It would be possible to recognize such expressions, that can resolve
to constants, but this problem was hit before, in preexisting tests,
so xfail the new hits similarly.
The new hits were caused by yesterday's patch to dwarf2dbg.c: views in
the beginning of subsections are now computed later, based on the
final views or previous subsections in the same section.
for gas/ChangeLog
* testsuite/gas/elf/dwarf2-18.d: Xfail mep-*.
* testsuite/gas/elf/dwarf2-19.d: Likewise.
When adding a debug print here in index-cache.exp:
...
proc_with_prefix test_cache_disabled { cache_dir } {
lassign [ls_host $cache_dir] ret files_before
+ puts "before: '$files_before'"
+ exit
...
we have:
...
files_before: ''
...
When further adding:
...
proc_with_prefix test_cache_disabled { cache_dir } {
+ exec touch $cache_dir/foo.1 $cache_dir/foo.2 $cache_dir/foo.3
...
we have:
...
files_before: 'foo.1'
...
while we're expecting file_before to contain foo.[123].
Fix this by making the return statement in ls_host return a list rather than a
string (in accordance with the ls_host documentation), after which we have:
...
files_before: 'foo.1 foo.2 foo.3'
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-05-07 Tom de Vries <tdevries@suse.de>
* gdb.base/index-cache.exp (ls_host): Fix return statement.
When running gdb.dlang/watch-loc.exp with target board cc-with-debug-names, we
run into:
...
FAIL: gdb.dlang/watch-loc.exp: disassemble _Dmain (GDB internal error)
...
in more detail:
...
(gdb) disassemble _Dmain
gdb/dwarf2read.c:5293: internal-error: \
compunit_symtab* dw2_find_pc_sect_compunit_symtab(objfile*, \
bound_minimal_symbol, CORE_ADDR, obj_section*, int): \
Assertion `result != NULL' failed.
...
The problem is that the .debug_aranges section in watch-loc.c contains a
debug_info_offset which is set to 0:
...
asm (
" .pushsection .debug_aranges,\"\",%progbits\n"
" .4byte .Laranges_end - .Laranges_start\n"
".Laranges_start:\n"
" .2byte 0x2\n"
" .4byte 0\n"
...
while the compilation unit at offset 0 in the .debug_section in the executable
is in fact not the compilation unit generated from watch-loc-dw.S.
[ Note: this is a non-trivial test-case. The file watch-loc-dw.S contains a
.debug_info section, but not an .debug_aranges section or any actual code.
The file watch-loc.c contains code and a .debug_aranges section, but no other
debug section. So, the intent for the .debug_aranges section in watch-loc.c
is to refer to a compilation unit in the .debug_info section in
watch-loc-dw.S. ]
This happens when linked in object files contain dwarf info and are placed in
the .debug_info section before the compilation units generated from
watch-loc.c and watch-loc-dw.S.
Fix this by defining the debug_info_offset field using a label .Lcu1_begin
that defines the start of an empty .debug_section compilation unit:
...
asm (
+ " .pushsection .debug_info,\"\",%progbits\n"
+ ".Lcu1_begin:"
+ " .popsection\n"
" .pushsection .debug_aranges,\"\",%progbits\n"
" .4byte .Laranges_end - .Laranges_start \n"
".Laranges_start:\n"
" .2byte 0x2\n"
- " .4byte 0\n"
+ " .4byte .Lcu1_begin\n"
...
which during linking merges with the start of the .debug_info section of
watch-loc-dw.S.
Tested on x86_64-linux with native, cc-with-gdb-index and cc-with-debug-names.
gdb/testsuite/ChangeLog:
2019-05-07 Tom de Vries <tdevries@suse.de>
PR testsuite/24522
* gdb.dlang/watch-loc.c: Fix debug_info_offset in .debug_aranges
section.
When running gdb.dwarf2/dw2-case-insensitive.exp with target board
cc-with-debug-names, we run into:
...
FAIL: gdb.dwarf2/dw2-case-insensitive.exp: regexp case-sensitive off \
(GDB internal error)
...
in more detail:
...
(gdb) info functions fUnC_lang
gdb/dwarf2read.c:5293: internal-error: \
compunit_symtab* dw2_find_pc_sect_compunit_symtab(objfile*, \
bound_minimal_symbol, CORE_ADDR, obj_section*, int): \
Assertion `result != NULL' failed.
...
The problem is that the .debug_aranges section in dw2-case-insensitive-debug.S
contains a debug_info_offset which is set to 0:
...
.section .debug_aranges,"",@progbits
.4byte .Laranges_end - .Laranges_start
.Laranges_start:
.2byte 0x2
.4byte 0
...
while the compilation unit at offset 0 in the .debug_section of the executable
is in fact not the compilation unit generated from
dw2-case-insensitive-debug.S.
This happens when linked in object files contain dwarf info and are placed in
the .debug_info section before the compilation unit generated from
dw2-case-insensitive-debug.S.
Fix this by defining the debug_info_offset field using the label .Lcu1_begin
that defines the start of the compilation unit:
...
- .4byte 0
+ .4byte .Lcu1_begin
...
Tested on x86_64-linux with native, cc-with-gdb-index and cc-with-debug-names.
gdb/testsuite/ChangeLog:
2019-05-07 Tom de Vries <tdevries@suse.de>
PR testsuite/24522
* gdb.dwarf2/dw2-case-insensitive-debug.S: Fix debug_info_offset in
.debug_aranges section.
When running gdb.dwarf2/multidictionary.exp with target board cc-with-dwz and
current dwz, we run into a dwz abort:
...
gdb compile failed, gdb/contrib/cc-with-tweaks.sh: line 188: 11484 Aborted \
(core dumped) $DWZ "$output_file" > /dev/null 2>&1
UNTESTED: gdb.dwarf2/multidictionary.exp: multidictionary.exp
...
The dwz abort (PR dwz/24169) is caused by an invalid DW_FORM_ref_addr in the
multidictionary binary.
The multidictionary binary is build from multidictionary.S which is generated
using the dwarf assembler, and multidictionary.S contains dwarf for 3
compilation units.
In multidictionary0.o (generated from multidictionary.S), we find a concrete
formal parameter DIE:
...
<2><dc>: Abbrev Number: 4 (DW_TAG_formal_parameter)
<dd> DW_AT_abstract_origin: <0xa6>
...
referring to an abstract formal parameter DIE at 0xa6:
...
<2><a6>: Abbrev Number: 8 (DW_TAG_formal_parameter)
<a7> DW_AT_name : msg
<ab> DW_AT_type : <0x92>
...
but in the multidictionary binary the concrete formal parameter DIE is still
referring to 0xa6:
...
<2><1a3>: Abbrev Number: 4 (DW_TAG_formal_parameter)
<1a4> DW_AT_abstract_origin: <0xa6>
...
while the abstract formal parameter DIE has moved to 0x16d:
...
<2><16d>: Abbrev Number: 8 (DW_TAG_formal_parameter)
<16e> DW_AT_name : msg
<172> DW_AT_type : <0x159>
...
The concrete formal parameter DIE is specified in multidictionary.S like this:
...
.Llabel21:
.uleb128 4
.4byte .Llabel17 - .Lcu1_begin
...
The problem is that the .Lcu1_begin label is assumed to mark the start of the
.debug_info section in the executable, but in fact it marks the start of the
first compilation unit from multidictionary.S in the executable. Usually
these two entities are the same, but they are not when linked in object files
contain dwarf info and are placed in the .debug_info section before the
compilation units generated from multidictionary.S.
Fix this in the dwarf assembler by generating instead the label itself:
...
.Llabel21:
.uleb128 4
.4byte .Llabel17
...
resulting in a relocation in the object file:
...
Offset Info Type Sym. Value Sym. Name + Addend
0000000000dd 00040000000a R_X86_64_32 0000000000000000 .debug_info + a6
...
and resulting in the correct offset in the executable:
...
<2><1a3>: Abbrev Number: 4 (DW_TAG_formal_parameter)
<1a4> DW_AT_abstract_origin: <0x16d>
...
Tested on x86_64-linux with native and cc-with-dwz.
gdb/testsuite/ChangeLog:
2019-05-07 Tom de Vries <tdevries@suse.de>
PR testsuite/24159
* lib/dwarf.exp: Fix handling of DW_FORM_ref_addr.
