Alan Modra
3db64b0092
bfd/
...
Many files: Include sysdep.h before bfd.h.
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
binutils/
* bucumm.h: Split off host dependencies to..
* sysdep.h: ..here.
Many files: Include sysdep.h. Remove duplicate headers and reorder.
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
ld/
Many files: Include sysdep.h first. Remove duplicate headers.
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
opcodes/
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
* ns32k-dis.c: Include sysdep.h first.
2007-04-26 14:47:00 +00:00
Alan Modra
ed180cc5db
* budemang.c: Delete.
...
* budemang.h: Delete.
* addr2line.c (translate_addresses): Call bfd_demangle rather than
demangle.
* nm.c (print_symname): Likewise.
* objdump.c (objdump_print_symname, dump_symbols): Likewise.
(dump_bfd): Likewise.
* prdbg.c (struct pr_handle <demangler>): Add int param.
(tg_variable, tg_start_function): Adjust demangler calls.
* Makefile.am: Remove mention of budemang.[ch]. Run "make dep-am".
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2007-04-19 10:43:47 +00:00
H.J. Lu
c428fa83c2
bfd/
...
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (bfdver.h): Substitute report_bugs_to. Also
create doc/bfdver.texi.
* Makefile.in: Regenerated.
* configure.in (--with-bugurl): New option.
* configure: Regenerated.
* version.h (REPORT_BUGS_TO): New.
binutils/
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
* Makefile.in: Regenerated.
* bucomm.c: Don't include bfdver.h.
* objdump.c: Likewise.
* version.c: Likewise.
* bucomm.h: Include bfdver.h.
* configure.in (--with-bugurl): Removed.
* configure: Regenerated.
* doc/Makefile.am (binutils_TEXINFOS): Removed.
(AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
(TEXI2DVI): Likewise.
(config.texi): Removed.
(MOSTLYCLEANFILES): Remove config.texi.
* doc/Makefile.in: Regenerated.
* doc/binutils.texi: Include bfdver.texi instead of
config.texi.
gas/
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
* Makefile.in: Regenerated.
* configure.in (--with-bugurl): Removed.
* configure: Regenerated.
* doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
(AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
(TEXI2DVI): Likewise.
(gasver.texi): Removed.
(MOSTLYCLEANFILES): Remove gasver.texi.
(as.1): Don't depend on gasver.texi.
* doc/Makefile.in: Regenerated.
* doc/as.texi: Include bfdver.texi instead of gasver.texi.
gprof/
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
* Makefile.in: Regenerated.
* configure.in (--with-bugurl): Removed.
* configure: Regenerated.
ld/
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ld_TEXINFOS): Remove ldver.texi.
(AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
(TEXI2DVI): Likewise.
(REPORT_BUGS_TO): Removed.
(INCLUDES): Remove -DREPORT_BUGS_TO.
(ldver.texi): Likewise.
(ld.1): Don't depend on ldver.texi.
(MOSTLYCLEANFILES): Remove ldver.texi.
* Makefile.in: Regenerated.
* configure.in (--with-bugurl): Removed.
* configure: Regenerated.
* lexsup.c: Include bfdver.h.
* ld.texinfo: Include bfdver.texi instead of ldver.texi.
2007-03-15 14:17:20 +00:00
Joseph Myers
92f01d6100
top level:
...
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.ac (TOPLEVEL_CONFIGURE_ARGUMENTS): Fix quoting.
* configure: Regenerate.
bfd:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.in (--with-pkgversion): New option.
* configure: Regenerate.
* Makefile.am (bfdver.h): Substitute for @bfd_version_package@.
* Makefile.in: Regenerate.
* version.h (BFD_VERSION_STRING): Define using
@bfd_version_package@.
bfd/doc:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* Makefile.in: Regenerate.
binutils:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.in (--with-bugurl): New option.
* configure: Regenerate.
* Makefile.am (REPORT_BUGS_TO): Define.
(INCLUDES): Define REPORT_BUGS_TO.
Regenerate dependencies.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* bucomm.h: Remove include of bin-bugs.h.
* addr2line.c (usage): Don't print empty REPORT_BUGS_TO.
* ar.c (usage): Pass s to list_supported_targets. Don't print
empty REPORT_BUGS_TO.
* coffdump.c (show_usage): Don't print empty REPORT_BUGS_TO.
* cxxfilt.c (usage): Print bug url when giving help.
* dlltool.c (usage): Likewise.
* dllwrap.c (usage): Likewise.
* nlmconv.c (show_usage): Don't print empty REPORT_BUGS_TO.
* nm.c (usage): Likewise.
* objcopy.c (copy_usage, strip_usage): Likewise.
* objdump.c (usage): Likewise.
* readelf.c ((usage): Likewise. Add STREAM argument. Adjust
callers.
* size.c (usage): Don't print empty REPORT_BUGS_TO.
* srconv.c (show_usage): Likewise.
* strings.c (usage): Likewise.
* sysdymp.c (show_usage): Likewise.
* windres.c (usage): Likewise.
gas:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.in (--with-bugurl): New option.
* configure: Regenerate.
* dep-in.sed: Remove bin-bugs.h.
* Makefile.am (REPORT_BUGS_TO): Define.
(INCLUDES): Define REPORT_BUGS_TO.
(DEP_INCLUDES): Likewise.
($(OBJS)): No longer depend on bin-bugs.h.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* as.c (show_usage): Don't print empty REPORT_BUGS_TO.
* as.h: Remove include of bin-bugs.h.
gprof:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.in (--with-pkgversion, --with-bugurl): New options.
* configure: Regenerate.
* Makefile.am (PKGVERSION, REPORT_BUGS_TO): Define.
(INCLUDES): Define PKGVERSION and REPORT_BUGS_TO.
Regenerate dependencies.
* Makefile.in: Regenerate.
* gprof.c (usage): Don't print empty REPORT_BUGS_TO.
(main): Include PKGVERSION in version output.
* gprof.h: Remove include of bin-bugs.h.
include:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* bin-bugs.h: Remove.
ld:
2007-02-17 Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com
Joseph Myers <joseph@codesourcery.com>
* configure.in (--with-bugurl): New option.
* configure: Regenerate.
* Makefile.am (REPORT_BUGS_TO): Define.
(INCLUDES): Define REPORT_BUGS_TO.
Regenerate dependencies.
* Makefile.in: Regenerate.
* ld.h: Remove include of bin-bugs.h.
* lexsup.c (help): Don't print empty REPORT_BUGS_TO.
2007-02-17 13:33:57 +00:00
Paul Brook
2087ad8497
2006-10-30 Paul Brook <paul@codesourcery.com>
...
binutils/
* objdump.c (disassemble_section): Set info->symtab_pos.
(disassemble_data): Set info->symtab and info->symtab_size.
include/
* dis-asm.h (disassemble_info): Add symtab, symtab_pos and
symtab_size.
opcodes/
* arm-dis.c (last_is_thumb, last_mapping_sym, last_mapping_addr): New.
(get_sym_code_type): New function.
(print_insn): Search for mapping symbols.
2006-10-31 20:21:57 +00:00
Nick Clifton
0112cd268b
* bfd-in.h (STRING_AND_COMMA): New macro. Takes one constant string as its
...
argument and emits the string followed by a comma and then the length of
the string.
(CONST_STRNEQ): New macro. Checks to see if a variable string has a constant
string as its initial characters.
(CONST_STRNCPY): New macro. Copies a constant string to the start of a
variable string.
* bfd-in2.h: Regenerate.
* <remainign files>: Make use of the new macros.
2006-09-16 18:12:17 +00:00
Nick Clifton
d68c385bfc
PR binutils/3001
...
* addr2line.c (process_file): Change function from void to returning an int. Return 0 upon success, 1 otherwise.
(main): Use return value from process_file as the exit value.
* ar.c (ranlib_only): Change function from void to returning an int. Return 0 upon success, 1 otherwise.
(ranlib_touch): Likewise.
(main): Use return value from ranlib functions as exit value.
* objcopy.c (add_specific_symbol): Set status to 1 if get_file_size fails.
(copy_file): Likewise.
(strip_main): Likewise.
(copy_main): Likewise.
* objdump.c (display_file): Set exit_status to 1 if get_file_size fails.
* size.c (display_file): Set return_code to 1 if get_file_size fails.
2006-08-06 15:49:46 +00:00
Nick Clifton
2ae86dfcdb
Fix typo
2006-04-12 13:05:36 +00:00
Eric Botcazou
db50c8404c
* configure.in (CHECK_DECLS): Add snprintf and vsnprintf.
...
* configure: Regenerate.
* objdump.c (fprintf): Remove declaration.
* bucomm.h (fprintf): Declare if not already declared.
(snprintf): Likewise.
(vsnprintf): Likewise.
2006-02-09 11:49:53 +00:00
Andreas Schwab
d99b646536
PR binutils/1486
...
binutils/:
* configure.in: Don't define DISASSEMBLER_NEEDS_RELOCS.
* configure: Regenerate.
* objdump.c (struct objdump_disasm_info): Don't check for
DISASSEMBLER_NEEDS_RELOCS.
(objdump_print_addr): Likewise.
(disassemble_bytes): Check disassembler_needs_relocs from
disassemble_info at run-time instead of DISASSEMBLER_NEEDS_RELOCS
at compile-time.
(disassemble_section): Likewise.
(disassemble_data): Initialize it.
include/:
* dis-asm.h (struct disassemble_info): Add
disassembler_needs_relocs.
objdump/:
* disassemble.c (disassemble_init_for_target): Set
disassembler_needs_relocs for bfd_arch_arm.
2006-01-17 17:39:20 +00:00
Mark Mitchell
07012eeef2
* addr2line.c (usage): Document @file.
...
* ar.c (usage): Likewise.
* coffdump (usage): Likewise.
* cxxfilt.c (usage): Likewise.
* dlltool.c (usage): Likewise.
* dllwrap.c (usage): Likewise.
* nlmconv.c (usage): Likewise.
* nm.c (usage): Likewise.
* objcopy.c (usage): Likewise.
* objdump.c (usage): Likewise.
* readelf.c (usage): Likewise.
* size.c (usage): Likeise.
* srconv.c (usage): Likewise.
* strings.c (usage): Likewise.
* windres.c (usage): Likewise.
* doc/binutils.texi: Add section on common options.
2005-10-03 19:37:44 +00:00
Mark Mitchell
869b9d07bb
* addr2line.c (main): Likewise.
...
* ar.c (main): Likewise.
* coffdump.c (main): Likewise.
* cxxfilt.c (main): Likewise.
* dlltool.c (main): Likewise.
* dllwrap.c (main): Likewise.
* nlmconv.c (main): Likewise.
* nm.c (main): Likewise.
* objcopy.c (main): Likewise.
* objdump.c (main): Likewise.
* readelf.c (main): Likewise.
* size.c (main): Likeiwse.
* srcconv.c (main): Likewise.
* strings.c (main): Likewise.
* sysdump.c (main): Likewise.
* sysinfo.c (main): Likewise.
* windres.c (main): Likewise.
* ldmain.c (main): Use expandargv.
* gprof.c (main): Use expandargv.
* as.c (main): Use expandargv.
2005-09-30 16:37:32 +00:00
H.J. Lu
bfe2612a14
2005-09-30 H.J. Lu <hongjiu.lu@intel.com>
...
* dwarf.c (fetch_indirect_string): Adjust for section address.
(process_debug_info): Likewise.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.
* objdump.c (mach_o_dwarf_sections): New.
(generic_dwarf_sections): Likewise.
(check_mach_o_dwarf): Likewise.
(dump_dwarf): Call check_mach_o_dwarf.
2005-09-30 14:57:52 +00:00
H.J. Lu
365544c3f0
2005-09-30 H.J. Lu <hongjiu.lu@intel.com>
...
* Makefile.am (objdump_SOURCES): Add dwarf.c.
* Makefile.in: Regenerated.
* objdump.c: Include "dwarf.h".
(usage): Add -W/--dwarf.
(long_options): Likewise.
(dump_dwarf_section_info): New.
(load_debug_section): Likewise.
(free_debug_section): Likewise.
(dump_dwarf_section): Likewise.
(dump_dwarf): Likewise.
(dump_bfd): Load symbol table and call dump_dwarf if
dump_dwarf_section_info isn't zero.
(main): Handle -W/--dwarf.
2005-09-30 14:56:34 +00:00
H.J. Lu
bc79cded48
bfd/
...
2005-08-17 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/1179
* dwarf2.c (_bfd_dwarf2_find_nearest_line): Use section lma
instead of vma.
(_bfd_dwarf2_find_line): Likewise.
binutils/
2005-08-17 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/1179
* objdump.c (disassemble_bytes): Don't adjust
adjust_section_vma.
(adjust_addresses): Don't adjust vma for debugging section.
Adjust lma only for relocatable files.
(dump_bfd): Tell adjust_addresses if it is a relocatable file.
2005-08-17 14:28:01 +00:00
Jim Wilson
0fd3a4776c
Kaveh Ghazi's printf format attribute checking patch.
...
bfd:
* elf32-xtensa.c (vsprint_msg): Add format attribute. Fix
format bugs.
* vms.h (_bfd_vms_debug): Add format attribute.
(_bfd_vms_debug, _bfd_hexdump): Fix typos.
binutils:
* bucomm.h (report): Add format attribute.
* dlltool.c (inform): Likewise.
* dllwrap.c (display, inform, warn): Likewise.
* objdump.c (objdump_sprintf): Likewise.
* readelf.c (error, warn): Likewise. Fix format bugs.
gas:
* config/tc-tic30.c (debug): Add format attribute. Fix format
bugs.
include:
* dis-asm.h (fprintf_ftype): Add format attribute.
opcodes:
* arc-dis.c, arm-dis.c, cris-dis.c, crx-dis.c, d10v-dis.c,
d30v-dis.c, fr30-dis.c, h8300-dis.c, h8500-dis.c, i860-dis.c,
ia64-dis.c, ip2k-dis.c, m10200-dis.c, m10300-dis.c,
m88k-dis.c, mcore-dis.c, mips-dis.c, ms1-dis.c, or32-dis.c,
ppc-dis.c, sh64-dis.c, sparc-dis.c, tic4x-dis.c, tic80-dis.c,
v850-dis.c: Fix format bugs.
* ia64-gen.c (fail, warn): Add format attribute.
* or32-opc.c (debug): Likewise.
2005-07-07 19:27:52 +00:00
Steve Ellcey
398ee8f162
* configure.in (AM_BINUTILS_WARNINGS): Add.
...
(BFD_NEED_DECLARATION): Replace with AC_CHECK_DECLS.
* configure: Regenerate.
* config.in: Regenerate.
* objdump.c (NEED_DECLARATION_*): Replace with !HAVE_DECL_*.
* bucomm.h: (NEED_DECLARATION_*): Ditto.
2005-07-01 15:19:47 +00:00
Jakub Jelinek
f9ecb0a440
* objdump.c (disassemble_bytes): Don't crash if q->howto == NULL.
...
If q->howto->name == NULL, print q->howto->type as number instead.
(dump_reloc_set): Likewise.
2005-06-09 14:51:41 +00:00
Nick Clifton
b43b5d5f76
Update FSF address
2005-05-08 14:17:41 +00:00
H.J. Lu
3bee8bcdbf
2005-04-19 H.J. Lu <hongjiu.lu@intel.com>
...
* objdump.c (dump_section_header): Skip linker created section.
2005-04-19 21:29:46 +00:00
H.J. Lu
64c1196b58
2005-04-17 H.J. Lu <hongjiu.lu@intel.com>
...
* objdump.c (dump_section_header): Support SEC_GROUP.
2005-04-17 14:33:06 +00:00
Nick Clifton
661f7c357e
Add a check to see if the section for the symbol is chosen using
...
process_section_p.
2005-04-04 10:32:28 +00:00
Aaron W. LaFramboise
5810296be6
* objdump.c (disassemble_bytes): Remove cast.
2005-03-28 12:28:17 +00:00
Paul Brook
58450b3bbc
2005-03-18 Paul Brook <paul@codesourcery.com>
...
* objdump.c (objdump_print_addr): Avoid uninitialized warning.
2005-03-18 16:28:13 +00:00
Nick Clifton
ce04548af9
objdump.c: Fix coding for DISASSEMBLER_NEEDS_RELOC:
...
(struct objdump_disasm_info): Add 'reloc' field.
(disassemble_bytes): Fix check for when an insn has a reloc associated with it.
Improve comment explaining why the use of octets is wrong. Set the 'reloc'
field in objdump_disasm_info structure.
(objdump_print_addr): Use new 'reloc' field to lookup the correct address for
the symbol associated with the current instruction's relocation.
(disassemble_info): Initialise 'reloc' field.
gas/arm/inst.d: Allow for ARM ports which decode the reloc associated with
branches and so show the exact symbolic destination address rather than an
offset from the start of the section.
gas/arm/pic.d: Likewise.
2005-03-01 15:18:44 +00:00
Alan Modra
9210d87943
* dlltool.c: Warning fixes.
...
* objdump.c: Likewise.
2005-02-23 12:25:57 +00:00
H.J. Lu
ebe372c1dd
bfd/
...
2005-02-21 H.J. Lu <hongjiu.lu@intel.com>
* coffcode.h (sec_to_styp_flags): Replaced SEC_CLINK with
SEC_TIC54X_CLINK. Replace SEC_BLOCK with SEC_TIC54X_BLOCK.
Replace SEC_SHARED with SEC_COFF_SHARED.
(styp_to_sec_flags): Likewise.
* elfxx-target.h (TARGET_BIG_SYM): Remove SEC_ARCH_BIT_0.
(TARGET_LITTLE_SYM): Likewise.
* section.c (SEC_ARCH_BIT_0): Removed.
(SEC_LINK_DUPLICATES_SAME_CONTENTS): Defined with
SEC_LINK_DUPLICATES_ONE_ONLY and SEC_LINK_DUPLICATES_SAME_SIZE.
(SEC_SHARED): Renamed to ...
(SEC_COFF_SHARED): This.
(SEC_BLOCK): Renamed to ...
(SEC_TIC54X_BLOCK): This.
(SEC_CLINK): Renamed to ...
(SEC_TIC54X_CLINK): This.
(SEC_XXX): Rearranged. Move SEC_COFF_SHARED_LIBRARY,
SEC_COFF_SHARED, SEC_TIC54X_BLOCK and SEC_TIC54X_CLINK to the
end.
* bfd-in2.h: Regenerated.
binutils/
2005-02-21 H.J. Lu <hongjiu.lu@intel.com>
* objcopy.c (parse_flags): Replace SEC_SHARED with
SEC_COFF_SHARED.
* objdump.c (dump_section_header): Dump SEC_TIC54X_BLOCK and
SEC_TIC54X_CLINK for TI c54x only. Remove SEC_ARCH_BIT_0. Dump
SEC_COFF_SHARED for COFF only.
gas/
2005-02-21 H.J. Lu <hongjiu.lu@intel.com>
* config/obj-coff.c (obj_coff_section): Replace SEC_SHARED with
SEC_COFF_SHARED.
* config/tc-tic54x.c (tic54x_bss): Replace SEC_BLOCK with
SEC_TIC54X_BLOCK.
(demand_empty_rest_of_line): Likewise.
(tic54x_sblock): Likewise.
(tic54x_clink): Replace with SEC_CLINK with SEC_TIC54X_CLINK.
ld/
2005-02-21 H.J. Lu <hongjiu.lu@intel.com>
* ldlang.c (lang_add_section): Check SEC_TIC54X_BLOCK for TI
tic54x input only.
(lang_size_sections_1): Check SEC_COFF_SHARED_LIBRARY for COFF
and ECOFF output only.
2005-02-22 00:50:07 +00:00
Andreas Schwab
0bcb06d2f2
binutils/:
...
* configure.in: Don't define SKIP_ZEROES.
* configure: Regenerate.
* objdump.c (disassemble_data): Set skip_zeroes and
skip_zeroes_at_end in disasm_info to defaults.
(DEFAULT_SKIP_ZEROES): Rename from SKIP_ZEROES and always define.
(DEFAULT_SKIP_ZEROES_AT_END): Rename from SKIP_ZEROES_AT_END and
always define.
(disassemble_bytes): Use skip_zeroes and skip_zeroes_at_end from
objdump_disasm_info.
include/:
* dis-asm.h (struct disassemble_info): Add skip_zeroes and
skip_zeroes_at_end.
opcodes/:
* disassemble.c (disassemble_init_for_target) <case
bfd_arch_ia64>: Set skip_zeroes to 16.
<case bfd_arch_tic4x>: Set skip_zeroes to 32.
2005-01-10 09:54:50 +00:00
Alan Modra
180e47e2d7
* objdump.c (remove_useless_symbols): Discard section symbols.
2004-12-30 22:33:20 +00:00
Alan Modra
83ef079838
* objdump.c (dump_symbols): Fix thinko last change. Improve error
...
messages.
2004-10-11 08:18:43 +00:00
Nick Clifton
3c9458e953
Implement a new BFD API function: bfd_is_target_special_symbol. Use this in nm
...
and objdump to skip the displaying of ARM Mapping symbols unless specifically
requested.
2004-10-08 14:54:04 +00:00
Alan Modra
c9727e01b5
bfd/
...
* bfd.c (bfd_get_synthetic_symtab): Pass counts and both symbol tables.
* elf-bfd.h (_bfd_elf_get_synthetic_symtab): Adjust.
* elf.c (_bfd_elf_get_synthetic_symtab): Adjust.
* libbfd-in.h (_bfd_nodynamic_get_synthetic_symtab): Adjust.
* targets.c (struct bfd_target <_bfd_get_synthetic_symtab>): Adjust.
* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Don't read symbols.
Use both symbol tables on non-relocatable objects. Use a common
error exit. Fix "mid" warning.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
binutils/
* objdump.c (dump_bfd): Pass both symbol tables to
bfd_get_synthetic_symtab.
2004-08-28 03:05:18 +00:00
Jakub Jelinek
90e3cdf2a9
bfd/
...
* elfxx-target.h (bfd_elfNN_get_synthetic_symtab): Only define
if not yet defined.
* elf64-ppc.c (bfd_elf64_get_synthetic_symtab): Define.
(synthetic_opd, synthetic_relocatable): New variables.
(compare_symbols, compare_relocs): New helper routines.
(ppc64_elf_get_synthetic_symtab): New function.
* bfd.c (bfd_get_synthetic_symtab): Rename dynsyms argument
to relsyms.
* bfd-in2.h: Regenerated.
* elf.c (_bfd_elf_get_synthetic_symtab): Rename dynsyms argument
to relsyms. Return 0 if abfd is relocatable.
binutils/
* objdump.c (dump_bfd): For relocatable objects, pass syms instead
of dynsyms to bfd_get_synthetic_symtab.
2004-08-17 09:07:35 +00:00
Nick Clifton
ed049af3bc
Fix for PR 280 - remove duplicated raw insn output fron h8300/h8500 disassemblers
2004-07-22 16:52:43 +00:00
H.J. Lu
082b729701
bfd/
...
2004-07-21 H.J. Lu <hongjiu.lu@intel.com>
* aout-adobe.c (aout_32_section_already_linked): Defined.
* aout-target.h (MY_section_already_linked): Likewise.
* aout-tic30.c (MY_section_already_linked): Likewise.
* binary.c (binary_section_already_linked): Likewise.
* bout.c (b_out_section_already_linked): Likewise.
* coff-alpha.c (_bfd_ecoff_section_already_linked): Likewise.
* coff-mips.c (_bfd_ecoff_section_already_linked): Likewise.
* coffcode.h (coff_section_already_linked): Likewise.
* i386msdos.c (msdos_section_already_linked): Likewise.
* i386os9k.c (os9k_section_already_linked): Likewise.
* ieee.c (ieee_section_already_linked): Likewise.
* ihex.c (ihex_section_already_linked): Likewise.
* mach-o.c (bfd_mach_o_section_already_linked): Likewise.
* mmo.c (mmo_section_already_linked): Likewise.
* nlm-target.h (nlm_section_already_linked): Likewise.
* oasys.c (oasys_section_already_linked): Likewise.
* pef.c (bfd_pef_section_already_linked): Likewise.
* ppcboot.c (ppcboot_section_already_linked): Likewise.
* som.c (som_bfd_discard_group): Likewise.
* srec.c (srec_section_already_linked): Likewise.
* tekhex.c (tekhex_section_already_linked): Likewise.
* versados.c (versados_section_already_linked): Likewise.
* vms.c (vms_section_already_linked): Likewise.
* coff-target.h (_bfd_xcoff_section_already_linked): Likewise.
* xsym.c (bfd_sym_section_already_linked): Likewise.
* bfd-in.h (bfd_section_already_linked_table_init): New.
(bfd_section_already_linked_table_free): Likewise.
* coff-rs6000.c (rs6000coff_vec): Add
_bfd_generic_section_already_linked.
(pmac_xcoff_vec): Likewise.
* coff64-rs6000.c (rs6000coff64_vec): Likewise.
(aix5coff64_vec): Likewise.
* elf-bfd.h (_bfd_elf_section_already_linked): New prototype.
* elflink.c (_bfd_elf_section_already_linked): New function.
* elfxx-target.h (bfd_elfNN_section_already_linked): Defined.
* libbfd-in.h (_bfd_nolink_section_already_linked): Defined.
(_bfd_generic_section_already_linked): New.
(bfd_section_already_linked_hash_entry): Likewise.
(bfd_section_already_linked): Likewise.
(bfd_section_already_linked_table_lookup): Likewise.
(bfd_section_already_linked_table_insert): Likewise.
* linker.c (bfd_section_already_linked): New.
(_bfd_section_already_linked_table): Likewise.
(bfd_section_already_linked_table_lookup): Likewise.
(bfd_section_already_linked_table_insert): Likewise.
(already_linked_newfunc): Likewise.
(bfd_section_already_linked_table_init): Likewise.
(bfd_section_already_linked_table_free): Likewise.
(_bfd_generic_section_already_linked): Likewise.
* section.c (bfd_section): Remove comdat.
(bfd_comdat_info): Moved to ...
* bfd-in.h (coff_comdat_info): Here.
(bfd_coff_get_comdat_section): New.
* coffgen.c (bfd_coff_get_comdat_section): Likewise.
* libcoff-in.h (coff_section_tdata): Add comdat.
* coffcode.h (handle_COMDAT): Updated.
* cofflink.c (coff_link_add_symbols): Likewise.
* ecoff.c (bfd_debug_section): Likewise.
* targets.c (bfd_target): Add _section_already_linked.
(BFD_JUMP_TABLE_LINK): Updated.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
* libcoff.h: Likewise.
binutils/
2004-07-21 H.J. Lu <hongjiu.lu@intel.com>
* objcopy.c (filter_symbols): Use bfd_coff_get_comdat_section
to access comdat.
* objdump.c (dump_section_header): Likewise.
ld/
2004-07-21 H.J. Lu <hongjiu.lu@intel.com>
* ldlang.c (already_linked_hash_entry): Removed.
(already_linked): Likewise.
(already_linked_table): Likewise.
(section_already_linked): Call bfd_section_already_linked.
(lang_process): Replace already_linked_table_init with
bfd_section_already_linked_table_init and check return. Replace
already_linked_table_free with bfd_section_already_linked_table_free.
2004-07-21 15:42:58 +00:00
Alan Modra
135dfb4a65
* objcopy.c (copy_section): Use bfd_get_section_size instead of
...
_raw_size or bfd_get_section_size_before_reloc. Don't set reloc_done.
(compare_section_lma): Likewise.
* addr2line.c (find_address_in_section): Likewise.
* coffgrok.c (do_sections_p1): Likewise.
* dlltool.c (scan_drectve_symbols): Likewise.
* nlmconv.c (main): Likewise.
(copy_sections): Likewise.
(powerpc_mangle_relocs): Likewise.
* objdump.c (disassemble_section): Likewise.
* prdbg.c (find_address_in_section): Likewise.
* size.c (berkeley_sum): Likewise.
* srconv.c (wr_ob): Likewise.
* strings.c (strings_a_section): Likewise.
2004-06-15 01:19:13 +00:00
Alan Modra
46212538d6
* objdump.c (disassemble_section): Don't disassemble sections
...
without SEC_HAS_CONTENTS.
2004-04-24 12:39:47 +00:00
Jakub Jelinek
4c45e5c9ce
bfd/
...
* bfd.c (bfd_get_synthetic_symtab): Define.
* targets.c (BFD_JUMP_TABLE_DYNAMIC): Add
NAME##_get_synthetic_symtab.
(struct bfd_target): Add _bfd_get_synthetic_symtab.
* libbfd-in.h (_bfd_nodynamic_get_synthetic_symtab): Define.
* elf-bfd.h (struct elf_backend_data): Add plt_sym_val and
relplt_name fields.
(_bfd_elf_get_synthetic_symtab): New prototype.
* elfcode.h (elf_get_synthetic_symtab): Define.
* elf.c (_bfd_elf_get_synthetic_symtab): New function.
* elfxx-target.h (bfd_elfNN_get_synthetic_symtab): Define.
(elf_backend_plt_sym_val, elf_backend_relplt_name): Define.
(elfNN_bed): Add elf_backend_plt_sym_val and elf_backend_relplt_name.
* bfd-in2.h: Rebuilt.
* libbfd.h: Rebuilt.
* elf32-i386.c (elf_i386_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.
* elf64-x86-64.c (elf64_x86_64_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.
* elf32-s390.c (elf_s390_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.
* elf64-s390.c (elf_s390_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.
* elf32-sparc (elf32_sparc_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.
* elf64-sparc.c (sparc64_elf_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.
* elf32-ppc.c (ppc_elf_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.
* aout-target.h (MY_get_synthetic_symtab): Define.
* aout-tic30.c (MY_get_synthetic_symtab): Define.
* coff-rs6000.c (rs6000coff_vec): Add
_bfd_nodynamic_get_synthetic_symtab.
(pmac_xcoff_vec): Likewise.
* coff64-rs6000.c (rs6000coff64_vec): Add
_bfd_nodynamic_get_synthetic_symtab.
(aix5coff64_vec): Likewise.
* sunos.c (MY_get_synthetic_symtab): Define.
* vms.c (vms_get_synthetic_symtab): Define.
binutils/
* objdump.c (synthsyms, synthcount): New variables.
(disassemble_data): Use dynsyms for stripped binaries or libraries.
Add synthetized symbols.
(dump_bfd): For disassemble, initialize dynsyms always and
also synthsyms. Free synthsyms and clear {sym,dynsym,synth}count
before returning.
2004-04-22 14:45:32 +00:00
Nathan Sidwell
6f10430691
* objdump.c (struct SFILE): Replace current pointer with pos
...
offset, rename size to alloc.
(objdump_sprintf): Avoid unnecessary copies in the common case
(disassemble_bytes): Keep sfile live throughout the
function. Adjust usage appropriately.
2004-03-15 12:31:41 +00:00
Jakub Jelinek
68b3b8dc9e
* objdump.c (disassemble_bytes): Subtract rel_offset from printed
...
reloc address.
(disassemble_section): Set rel_offset to section->vma instead of
pinfo->buffer_vma.
2003-12-22 10:49:59 +00:00
Kazu Hirata
aaad4cf36a
* ChangeLog-9197: Fix comment typos.
...
* coffgrok.c: Likewise.
* filemode.c: Likewise.
* objcopy.c: Likewise.
* objdump.c: Likewise.
* prdbg.c: Likewise.
* stabs.c: Likewise.
* unwind-ia64.c: Likewise.
2003-12-06 00:06:12 +00:00
Alan Modra
3b9ad1cc1f
* objdump.c: Wrap long lines, init vars separately from decl.
...
(disassemble_section): Reset require_sec after call to
find_symbol_for_address.
2003-11-19 08:21:14 +00:00
Nick Clifton
22a398e190
Add new field to disassemble_info structure: symbol_is_valid() and use it to
...
skip displaying arm elf mapping symbols in disassembly output.
2003-11-14 15:12:44 +00:00
Alan Modra
0f6cb37fa4
* objdump.c: Revert rev 1.81 commit.
2003-11-11 01:57:04 +00:00
Nick Clifton
b2699c8b72
Remove "member" from verbose output of "-dv" in order to conform to POSIX
...
specification.
2003-11-10 17:28:33 +00:00
Nick Clifton
f24ddbddc5
Use consistent error messages for missing files.
...
Detect directories where an ordinary file is expected.
2003-11-07 12:19:34 +00:00
Kazu Hirata
50c2245bd8
* ChangeLog: Fix typos.
...
* ChangeLog-9197: Likewise.
* ChangeLog-9899: Likewise.
* NEWS: Likewise.
* ar.c: Fix comment typos.
* arsup.c: Likewise.
* coffgrok.c: Likewise.
* debug.c: Likewise.
* debug.h: Likewise.
* dlltool.c: Likewise.
* ieee.c: Likewise.
* nm.c: Likewise.
* objdump.c: Likewise.
* prdbg.c: Likewise.
* readelf.c: Likewise.
* resrc.c: Likewise.
* sysinfo.y: Likewise.
* windres.c: Likewise.
2003-10-27 13:20:32 +00:00
Nathan Sidwell
29ca8dc5bb
bfd/Changelog:
...
* libbfd-in.h (_bfd_link_section_stabs): Add string offset
parameter.
* cofflink.c (coff_link_add_symbols): Deal with split stab
sections.
* elflink.h (elf_link_add_object_symbols): Deal with split stab
sections.
* stabs.c (_bfd_link_section_stabs): Add string offset parameter.
* libbfd.h: Regenerated.
ld/ChangeLog:
* ldwrite.c (unsplittable_name): New.
(clone_section): Strip existing numeric suffix. Only truncate names
for coff targets.
(split_sections): Use unsplittable_name.
binutils/ChangeLog:
* objdump.c (read_section_stabs): Just read one section, return
pointer to it. Add size parameter.
(print_section_stabs): Add string offset parameter. Adjust.
(struct stab_section_names): Add string offset member.
(find_stabs_sections): Correct check for split section suffix,
adjust read_section_stabs and print_section_stabs calls.
(dump_stabs_section): Clear string_offset, free string table.
2003-10-07 08:53:42 +00:00
Andrew Cagney
92c2346c02
Index: opcodes/ChangeLog
...
2003-09-03 Andrew Cagney <cagney@redhat.com>
* dis-init.c (init_disassemble_info): New file and function.
* Makefile.am (CFILES): Add "dis-init.c".
(libopcodes_la_SOURCES): Add "dis-init.c".
(dis-init.lo): Specify dependencies.
* Makefile.in: Regenerate.
Index: include/ChangeLog
2003-08-27 Andrew Cagney <cagney@redhat.com>
* dis-asm.h (init_disassemble_info): Declare.
(INIT_DISASSEMBLE_INFO): Redefine as a call to
init_disassemble_info.
(INIT_DISASSEMBLE_INFO_NO_ARCH): Ditto.
Index: binutils/ChangeLog
2003-09-03 Andrew Cagney <cagney@redhat.com>
* objdump.c: Refer to init_disassemble_info in comments.
(disassemble_data): Replace INIT_DISASSEMBLE_INFO with
init_disassemble_info.
2003-09-03 23:43:18 +00:00
Nick Clifton
155e0d2321
Use bfd_map_over_sections to walk section chain.
...
Do not dump the contents of an empty section.
2003-09-03 08:26:52 +00:00