Right now we always share per-BFD data across objfiles, if there is a
BFD. This works fine. However, we're going to start sharing more
data, and sometimes this data will come directly from sections of the
BFD. If such a section has SEC_RELOC set, then the data coming from
that section will not be truly sharable -- the section will be
program-space-dependent, and re-read by gdb for each objfile.
This patch disallows per-BFD sharing in this case. This is a bit
"heavy" in that we could in theory examine each bit of shared data for
suitability. However, that is more complicated, and SEC_RELOC is rare
enough that I think we needn't bother.
Note that the "no sharing" case is equivalent to "gdb works as it
historically did". That is, the sharing is a new(-ish) optimization.
Built and regtested on x86-64 Fedora 18.
* gdb_bfd.c (struct gdb_bfd_data) <relocation_computed,
needs_relocations>: New fields.
(gdb_bfd_requires_relocations): New function.
* gdb_bfd.h (gdb_bfd_requires_relocations): Declare.
* objfiles.c (get_objfile_bfd_data): Disallow sharing if
the BFD needs relocations applied.
gdb/
2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Pass down original filename for objfile.
* coffread.c (coff_symfile_read): Update symbol_file_add_separate call.
* elfread.c (elf_symfile_read): Likewise.
* jit.c (jit_object_close_impl): Update allocate_objfile call, no
longer set ORIGINAL_NAME.
(jit_bfd_try_read_symtab): Update symbol_file_add_from_bfd call.
* jv-lang.c (get_dynamics_objfile): Update allocate_objfile call.
* machoread.c (macho_add_oso_symfile): Add parameter name. Update
symbol_file_add_from_bfd call.
(macho_symfile_read_all_oso): Update two macho_add_oso_symfile calls.
(macho_check_dsym): Add parameter filenamep. Change function comment.
Set *filenamep.
(macho_symfile_read): New variable dsym_filename. Update
macho_check_dsym call. Use it for symbol_file_add_separate.
* objfiles.c (allocate_objfile): Add parameter name. New comment for
it. Use it for objfile->original_name.
(objfile_name): Return OBFD's filename, if available.
* objfiles.h (allocate_objfile): Add new parameter name.
* solib.c (solib_read_symbols): Update symbol_file_add_from_bfd call.
* symfile-mem.c (symbol_file_add_from_memory): Update
symbol_file_add_from_bfd call.
* symfile.c (read_symbols): Update symbol_file_add_separate call, new
comment for it.
(symbol_file_add_with_addrs): New parameter name, add function comment
for it. Remove variable name. Update allocate_objfile call.
(symbol_file_add_separate): New parameter name, add function comment
for it. Update symbol_file_add_with_addrs call.
(symbol_file_add_from_bfd): New parameter name. Update
symbol_file_add_with_addrs call.
(symbol_file_add): Update symbol_file_add_from_bfd call.
(reread_symbols): New variable original_name. Save
objfile->original_name by it.
* symfile.h (symbol_file_add_from_bfd, symbol_file_add_separate): Add
second parameter.
This moves the "gdbarch" field from the objfile into the BFD.
This field's value is derived from the BFD and is immutable over the
lifetime of the BFD. This makes it a reasonable candidate for pushing
into the per-BFD object.
This is part of the long-term objfile splitting project. In the long
run I think this patch will make it simpler to moves types from the
objfile to the per-BFD object; but the patch makes sense as a minor
cleanup by itself.
Built and regtested on x86-64 Fedora 18.
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Use
get_objfile_arch.
* elfread.c (elf_rel_plt_read, elf_gnu_ifunc_record_cache)
(elf_gnu_ifunc_resolve_by_got): Use get_objfile_arch.
* jit.c (jit_object_close_impl): Update.
* jv-lang.c (get_dynamics_objfile): Update.
* linespec.c (add_minsym): Use get_dynamics_objfile.
* objfiles.c (get_objfile_bfd_data): Initialize 'gdbarch' field.
(allocate_objfile): Don't initialize 'gdbarch' field.
(get_objfile_arch): Update.
* objfiles.h (struct objfile_per_bfd_storage) <gdbarch>: New field,
moved from...
(struct objfile) <gdbarch>: ... here. Remove.
* stap-probe.c (stap_can_evaluate_probe_arguments): Use
get_objfile_arch.
* symfile.c (init_entry_point_info): Use get_objfile_arch.
* objfiles.h (inhibit_section_map_updates): New function
declaration.
(resume_section_map_updates): Likewise.
(resume_section_map_updates_cleanup): Likewise.
* objfiles.c (objfile_pspace_info): Removed field
"objfiles_changed_p". New fields "new_objfiles_available",
"section_map_dirty" and "inhibit_updates".
(allocate_objfile): Set new_objfiles_available.
(free_objfile): Set section_map_dirty.
(objfile_relocate1): Likewise.
(in_plt_section): Likewise.
(find_pc_section): Update the conditions under which the
section map will be updated.
(inhibit_section_map_updates): New function.
(resume_section_map_updates): Likewise.
(resume_section_map_updates_cleanup): Likewise.
of bfd_count_sections.
* solib-target.c (solib_target_relocate_section_addresses): Ditto.
* symfile.c (default_symfile_offsets): Ditto.
(syms_from_objfile_1): Ditto. Make dummy addrs list an array of
one entry, not bfd_count_sections entries.
The target implements the new record sub-commands
"record instruction-history" and
"record function-call-history".
The target does not support reverse execution or navigation in the
recorded execution log.
gdb/
* Makefile.in (SFILES): Add record-btrace.c
(COMMON_OBS): Add record-btrace.o
* record-btrace.c: New.
* objfiles.c: Include btrace.h.
(free_objfile): call btrace_free_objfile.
Code cleanup.
* breakpoint.c (print_breakpoint_location): Replace bp_location field
source_file references by symtab field references. Remove variables
sal and fullname.
(momentary_breakpoint_from_master, add_location_to_breakpoint):
(clear_command, say_where): Replace bp_location field source_file
references by symtab field references.
(bp_location_dtor): Remove the source_file reference.
(update_static_tracepoint): Replace bp_location field source_file
references by symtab field references.
(breakpoint_free_objfile): New function.
* breakpoint.h (struct bp_location): Extend the comment for line_number.
Replace the field source_file by field symtab, extend its comment.
(breakpoint_free_objfile): New declaration.
* objfiles.c (free_objfile): Call breakpoint_free_objfile.
* tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
field source_file references by symtab field references.
* elfread.c (elf_symfile_read): Limit separate debug info additions to
files with no separate debug info.
* objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
* symfile.c (read_symbols): Call find_separate_debug_file_in_section
only for files with no separate debug info.
gdb/testsuite/
* gdb.base/gnu-debugdata.exp): Create ${binfile}.debug,
${binfile}.mini_debuginfo-debuglink, add -k to xz, use now
${binfile}.mini_debuginfo-debuglink and
${binfile}.mini_debuginfo-debuglink.xz.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
and 'abfd'.
* elfread.c (elf_symfile_read): Make a cleanup for 'debugfile'
and 'abfd'.
* jit.c (jit_bfd_try_read_symtab): Make a cleanup for 'nbfd'.
* machoread.c (macho_add_oso_symfile): Make a cleanup for
'abfd'.
(macho_symfile_read): Make a cleanup for 'dsym_bfd'.
* objfiles.c (allocate_objfile): Acquire a new reference.
* rs6000-nat.c (add_vmap): Don't acquire a BFD reference.
* solib.c (solib_read_symbols): Don't acquire a BFD reference.
* spu-linux-nat.c (spu_symbol_file_add_from_memory): Make
a cleanup for 'nbfd'.
* symfile-mem.c (symbol_file_add_from_memory): Make a cleanup
for 'nbfd'.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Don't
make a cleanup for 'abfd'.
(symbol_file_add): Make a BFD cleanup.
gdb_bfd_unref.
(free_dwo_file): Use gdb_bfd_unref.
* cli/cli-dump.c: Include gdb_bfd.h.
(bfd_openw_with_cleanup): Use gdb_bfd_ref.
(bfd_openr_with_cleanup): Likewise.
* windows-nat.c (windows_make_so): Use gdb_bfd_ref,
gdb_bfd_unref.
* utils.c: Include gdb_bfd.h.
(do_bfd_close_cleanup): Use gdb_bfd_unref.
* symfile.c: Include gdb_bfd.h.
(separate_debug_file_exists): Use gdb_bfd_unref.
(bfd_open_maybe_remote): Use gdb_bfd_ref.
(symfile_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
(generic_load): Use gdb_bfd_ref.
(reread_symbols): Use gdb_bfd_unref.
* symfile-mem.c: Include gdb_bfd.h.
(symbol_file_add_from_memory): Use make_cleanup_bfd_close.
* spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
* solib.c: Include gdb_bfd.h.
(solib_bfd_fopen): Use gdb_bfd_ref.
(solib_bfd_open): Use gdb_bfd_unref.
(free_so_symbols): Use gdb_bfd_unref.
(reload_shared_libraries_1): Use gdb_bfd_unref.
* solib-spu.c: Include gdb_bfd.h.
(spu_bfd_fopen): Use gdb_bfd_ref, gdb_bfd_unref.
* solib-pa64.c (pa64_solib_create_inferior_hook): Use gdb_bfd_ref,
gdb_bfd_unref.
* solib-frv.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-dsbt.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-darwin.c: Include gdb_bfd.h.
(darwin_solib_get_all_image_info_addr_at_init): Use gdb_bfd_ref,
gdb_bfd_unref.
(darwin_bfd_open): Use gdb_bfd_unref.
* rs6000-nat.c (add_vmap): Use gdb_bfd_ref, gdb_bfd_unref.
* remote-mips.c: Include gdb_bfd.h.
(mips_load_srec): Use gdb_bfd_ref.
(pmon_load_fast): Use gdb_bfd_ref.
* remote-m32r-sdi.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
* record.c: Include gdb_bfd.h.
(record_save_cleanups): Use gdb_bfd_unref.
(cmd_record_save): Use gdb_bfd_unref.
* procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_ref,
gdb_bfd_unref.
* objfiles.h (gdb_bfd_close_or_warn): Remove.
(gdb_bfd_ref, gdb_bfd_unref): Move to gdb_bfd.h.
* objfiles.c: Include gdb_bfd.h.
(free_objfile): Use gdb_bfd_unref.
(gdb_bfd_close_or_warn, gdb_bfd_ref, gdb_bfd_unref): Move to
gdb_bfd.c.
* machoread.c (macho_add_oso_symfile): Use gdb_bfd_unref.
(macho_symfile_read_all_oso): Use gdb_bfd_ref, gdb_bfd_unref.
(macho_check_dsym): Likewise.
* m32r-rom.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
(m32r_upload_command): Use gdb_bfd_ref.
* jit.c: Include gdb_bfd.h.
(jit_bfd_try_read_symtab): Use gdb_bfd_ref, gdb_bfd_unref.
* gdb_bfd.h: New file.
* gdb_bfd.c: New file.
* gcore.c: Include gdb_bfd.h.
(create_gcore_bfd): Use gdb_bfd_ref.
(do_bfd_delete_cleanup): Use gdb_bfd_unref.
(gcore_command): Use gdb_bfd_unref.
* exec.c: Include gdb_bfd.h.
(exec_close): Use gdb_bfd_unref.
(exec_close_1): Use gdb_bfd_unref.
(exec_file_attach): Use gdb_bfd_ref.
* elfread.c: Include gdb_bfd.h.
(build_id_verify): Use gdb_bfd_unref.
* dsrec.c: Include gdb_bfd.h.
(load_srec): Use gdb_bfd_ref.
* corelow.c: Include gdb_bfd.h.
(core_close): Use gdb_bfd_unref.
(core_open): Use gdb_bfd_ref.
* bfd-target.c: Include gdb_bfd.h.
(target_bfd_xclose): Use gdb_bfd_unref.
(target_bfd_reopen): Use gdb_bfd_ref.
* Makefile.in (SFILES): Add gdb_bfd.c.
(HFILES_NO_SRCDIR): Add gdb_bfd.h.
(COMMON_OBS): Add gdb_bfd.o.
This patch introduces the "iterate_over_objfiles_in_search_order"
gdbarch method, as well as its default implementation, and converts
the areas where it will matter to using this gdbarch method.
The default method implementation is the only one installed, and
the changes should have no functional impact in terms of behavior.
This only paves the way for the architectures that will need their
own version.
gdb/ChangeLog:
* gdbarch.sh: Add generation of
"iterate_over_objfiles_in_search_order_cb_ftype" typedef in
gdbarch.h. Add include of "objfiles.h" in gdbarch.c.
(iterate_over_objfiles_in_search_order): New gdbarch method.
* gdbarch.h, gdbarch.c: Regenerate.
* objfiles.h (default_iterate_over_objfiles_in_search_order):
Add declaration.
* objfiles.c (default_iterate_over_objfiles_in_search_order):
New function.
* symtab.c (lookup_symbol_aux_objfile): New function, extracted
out of lookup_symbol_aux_symtabs.
(lookup_symbol_aux_symtabs): Replace extracted-out code by
call to lookup_symbol_aux_objfile.
(struct global_sym_lookup_data): New type.
(lookup_symbol_global_iterator_cb): New function.
(lookup_symbol_global): Search for symbol using
gdbarch_iterate_over_objfiles_in_search_order and
lookup_symbol_global_iterator_cb.
* findvar.c (struct minsym_lookup_data): New type.
(minsym_lookup_iterator_cb): New function.
(default_read_var_value) [case LOC_UNRESOLVED]: Resolve the
symbol's address via gdbarch_iterate_over_objfiles_in_search_order
and minsym_lookup_iterator_cb.
Rename objfile_p_char parameter to objfilep.
(build_objfile_section_table): Result is now void. All callers
updated.
* objfiles.h (struct objfile): Tweak comments, whitespace.
(build_objfile_section_table): Update.
This fixes a problem where the debugger is trying to locate a minimal
symbol from its address, when the symbol is inside a section whose
VMA is different from its LMA.
We have a program that was built on ppc-elf using a linker script
such that data sections are placed in ROM, and then loaded onto RAM
at execution. So their VMA addresses are indeed different from
their LMA address.
Unfortunately, there is one place where GDB gets slightly confused
into thinking that these data sections are overlayed, while it's
not the case here. This show up when trying to print the list of
Ada tasks, where GDB is unable to determine their names, and thus
prints a generic `Ravenscar task' instead:
(gdb) info tasks
ID TID P-ID Pri State Name
1 1d580 127 Delay Sleep Ravenscar task
2 183f8 127 Delay Sleep Ravenscar task
* 3 13268 127 Runnable Ravenscar task
We expected:
(gdb) info tasks
ID TID P-ID Pri State Name
1 1d580 127 Delay Sleep environment_task
2 183f8 127 Delay Sleep raven2
* 3 13268 127 Runnable raven1
The name of the task is determined by looking up the symbol table
using the task ID, which is the address where the symbol is defined.
So, ada-tasks calls...
msym = lookup_minimal_symbol_by_pc (task_id);
... which in turn first tries to determine the section associated
to this address (find_pc_section), which itself uses a map of sections
to find it. The map itself is recomputed every time objfiles are
loaded/changed by `update_section_map'. And `update_section_map'
relies on `insert_section_p' to determine whether the section should
be inserted in the map or not.
This is where things get interesting for us, because `insert_section_p'
simply rejects overlay sections:
if (lma != 0 && lma != bfd_section_vma (abfd, section)
&& (bfd_get_file_flags (abfd) & BFD_IN_MEMORY) == 0)
/* This is an overlay section. IN_MEMORY check is needed to avoid
discarding sections from the "system supplied DSO" (aka vdso)
on some Linux systems (e.g. Fedora 11). */
return 0;
However, it shouldn't reject our section in this case, since overlay
debugging is off. The fix is to add a check that overlay debugging
is active before rejecting the section. This is similar to what is
done in `section_is_overlay' (which takes obj_section objects), for
instance.
gdb/Changelog:
* objfiles.c (insert_section_p): Do not detect overlay sections
if overlay debugging is off.
* elfread.c (elf_symfile_read): Protect dwarf2_initialize_objfile by
!objfile_has_partial_symbols. New comment.
* objfiles.c (objfile_has_partial_symbols): Call HAS_SYMBOLS if
SYM_READ_PSYMBOLS is not present. Extend the comment.
* symfile.h (struct sym_fns): Extend the sym_read_psymbols comment.
gdb/testsuite/
* gdb.base/gdbindex-stabs-dwarf.c: New file.
* gdb.base/gdbindex-stabs.c: New file.
* gdb.base/gdbindex-stabs.exp: New file.
Fix crash regression on systems featuring .gdb_index.
* objfiles.c (free_objfile): Move the
forget_cached_source_info_for_objfile call earlier. Comment it.
Extend the comment for objfile_free_data.
* infrun.c (follow_exec): Replace symbol_file_add_main by
symbol_file_add with SYMFILE_DEFER_BP_RESET, set_initial_language and
breakpoint_re_set.
* m32r-rom.c (m32r_load, m32r_upload_command): Use parameter 0 for
clear_symtab_users.
* objfiles.c (free_all_objfiles): Likewise.
* remote-m32r-sdi.c (m32r_load): Likewise.
* solib-som.c (som_solib_create_inferior_hook): Likewise.
* symfile.c (new_symfile_objfile): New comment for add_flags. Call
clear_symtab_users with ADD_FLAGS.
(reread_symbols): Use parameter 0 for clear_symtab_users.
(clear_symtab_users): New parameter add_flags. Do not call
breakpoint_re_set if SYMFILE_DEFER_BP_RESET.
(clear_symtab_users_cleanup): Use parameter 0 for clear_symtab_users.
* symtab.h (clear_symtab_users): New parameter add_flags.
gdb/testsuite/
* gdb.base/pie-execl.exp: New file.
* gdb.base/pie-execl.c: New file.
2010-08-31 Sami Wagiaalla <swagiaal@redhat.com>
* symfile.c (reread_symbols): Use psymbol_bcache_free, and
psymbol_bcache_init.
* psymtab.h (psymbol_bcache_init): New function prototype.
(psymbol_bcache_free): New function prototype.
(psymbol_bcache_get_bcache): New function prototype.
* psymtab.c (psymbol_bcache_init): New function.
(psymbol_bcache_free): New function.
(psymbol_bcache_full): New function.
(psymbol_bcache_get_bcache): New function.
(add_psymbol_to_bcache): use psymbol_bcache_full.
* objfiles.h (psymbol_cache): Change type of psymbol_cache to
psymbol_bcache.
* symmisc.c (print_symbol_bcache_statistics): Updated.
(print_objfile_statistics): Updated.
* objfiles.c (allocate_objfile): Use psymbol_bcache_init to initialize
psymbol_cache.
(free_objfile): Use psymbol_bcache_free.
2010-08-25 Sami Wagiaalla <swagiaal@redhat.com>
* psymtab.c (add_psymbol_to_bcache): Remove 'static' from
'static partial_symbol psymbol'.
(psymbol_hash): New function.
(psymbol_compare): New function.
* bcache.c (hash_continue): New.
(hash): Use hash_continue.
* bcache.c: Add hash_function and compare_function
pointers to bcache struct.
(bcache_full): Use bcache->hash_function, and
bcache->compare_function.
(bcache_compare): New function.
(bcache_xmalloc): Take hash_function and
compare_function arguments and initialize the
bcach's pointers.
Updated comment.
* objfiles.c (allocate_objfile): Updated.
* symfile.c (reread_symbols): Updated.
* python/py-type.c (typy_richcompare): Updated.
Tom Tromey