* callback.[ch]: New files.
* remote-rdp.c: Support for the ARM RDP monitor.
* Makefile: Update.
* arm-tdep.c (arm_othernames): New.
(_initialize_arm_tdep): install 'othernames' command.
(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
* configure.in: Check for termios.h, termio.h and sgtty.h.
(i[345]86-*-win32*): New host.
* configure: Regenerated.
* inflow.c: Clean up inclusions.
* main.c (main): Check for WINGDB, not WIN32.
* printcmd.c (do_examine): Put QUIT test in loop.
* remote-hms.c (e7000_load): Delete.
(hms_ops): Point to generic_load instead.
* remote-hms.c (hms_ops): Point to generic_load.
* remote-sim.c (sim_callback_write_stdout): Becomes
gdbsim_write_stdout.
(gdbsim_load): Call generic_load.
* remote-utils.c (gr_load_image): Delete.
* ser-unix.c (terminal.h): Include instead of havig
own #if tree.
(hardwire_flush_input): Reset input buffer too.
* source.c (openp): If WIN32 then open file in binary mode.
* terminal.h: Configure IO mechanism using autoconf defines if available and
not overriden.
* utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check.
* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o
* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE.
(ADDR_BITS_REMOVE): New.
(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
(INST_xx): New
(FRAME_FIND_SAVED_REGS): Pass the right argument.
(arm_get_next_pc): Declare.
* mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
* monitor.c: Turn on caching.
(monitor_printf): If a ^C was sent, don't expect to see its
echo.
(monitor_open): Enable caching.
(monitor_resume, monitor_load): Flush cache.
(monitor_xfer_memory): Call cache routine.
(monitor_dump_regs): New.
(monitor_fetch_registers): If monitor_dump_regs available
then use it.
(monitor_load): Don't ref exec_bfd if it's NULL.
(monitor_load_srec): Use new monitor_make_srec calling convention.
(monitor_make_srec): Rewrite to cope with two, three and four byte
addresses.
* remote-hms.c (hms_cmds): Initialze end-of-command delim.
* dcache.h, dcache.h: Rewritten.
* remote.c: Reenable caching.
(getpkt): Reduce MAX_TRIES to 3.
(remote_xfer_memory): Use dcache_xfer_memory.
* defs.h (error_hook): New.
* top.c (error_hook): New definition.
* utils.c (error): Use error_hook if initialized.
* sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
HAVE_SOCKETS in place of #ifndef GO32.
consistency with error_begin. Also print warning_pre_print.
Document it better.
* utils.c (warning): Use it.
* utils.c (error_begin): Doc fix.
* rs6000-nat.c (vmap_ldinfo): If symfile_objfile is not part of
any vmap, nuke it.
argument be an int, not a char. Using a prototype followed by an
old-style function definition in a case where an argument is
widened is a GCC-ism not supported by the native AIX compiler.
* Add rule for annotate.o to keep Sun make happy.
* configure.in: Add config for powerpc/Netware.
* partial-stab.h (near N_SO): Don't call START_PSYMTAB with null
filename. This speeds up handling of trailing N_SO stabs (they
mark the end of a .o file).
* target.c, target.h: Change the way pushing and popping of
targets work to support target overlays and inheritance.
* corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c:
Fixup references to current_target, due to previous changes.
* config/i386/tm-i386nw.h: Enable longjmp support. More work is
needed to get the address of longjmp out of the target.
fputs_unfiltered and exit directly, rather than fatal. The latter
calls vfprintf_unfiltered!
* gdbtypes.h, gdbtypes.c (can_dereference): New function.
* value.h, printcmd.c (print_value_flags): Move from here...
* annotate.c: ...to here, and make it use can_dereference.
* inflow.c (job_control, attach_flag, generic_mourn_inferior):
Remove, needed for both native and cross.
* target.c (attach_flag, generic_mourn_inferior): Put here.
* utils.c (job_control): Put here.
(terminal.h): Don't include anymore.
BROKEN_LARGE_ALLOCA. Do the cleanup before returning, rather than
leaving it on the chain. Reindent much of this function.
* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
config/ns32k/xm-ns32km3.h: Remove all references to
BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
* main.c, fork-child.c, many config files: Remove all
SET_STACK_LIMIT_HUGE code; with the above changes it should no
longer be needed.
* symtab.c (lookup_partial_symbol): Use if and abort, not assert.
This avoids __eprintf troubles.
* main.c (main): Surround in #ifndef MAIN_OVERRIDE. Move
initialization code which needs to be called even if we bypass the
command line stuff into gdb_init.
* utils.c (fputs_unfiltered): Surround in #ifndef
FPUTS_UNFILTERED_OVERRIDE.
* Makefile.in (libgdb.a): New target.
* utils.c: Rearrange I/O stuff a bit so that all output goes
through fputs_unfiltered. Use vasprintf; removes arbitrary limit
which made %s not work with arbitrarily large strings.
* printcmd.c (printf_command): Use printf_filtered, not
printf_unfiltered and printf, now that arbitrary limit is gone.
Thu May 12 17:04:58 1994 Stan Shebs (shebs@andros.cygnus.com)
* mpw-make.in (INCLUDE_CFLAGS): Add readline source dir.
(READLINE_CFLAGS, READLINE_SRC, READLINE_DIR): Uncomment.
(TSOBS): Don't compile inflow.c.
(all, install): Add MacGDB.
* main.c (main): Do Mac-specific init and command loop if a
standalone app, skip full option help message if compiling
with MPW C.
(gdb_readline): If MPW, add a newline after the (gdb) prompt.
* utils.c (_initialize_utils): If MPW, don't try to use termcap to
compute the window size.
* config/m68k/xm-mpw.h (printf, fprintf, fputs, fputc, putc,
fflush): Define as macros that expand into hacked_... versions.
(StandAlone, mac_app): Declare.
* macgdb.r (SIZE): Set the default partition to 4000K.
* mac-xdep.c (readline.h, history.h): Include.
(terminal.h): Don't include.
(mac_app): Define.
(gdb_has_a_terminal): Define Mac-specific version.
(do_keyboard_command): Simplify search for command string.
(readline): Define as gdb_readline.
Add other history/readline stubs to make main gdb link.
(hacked_fprintf, hacked_printf, hacked_vfprintf, hacked_fputs,
hacked_fputc, hacked_fflush): New functions, intercept output to
stdout and stderr, send to console window.
(quit): Print annotation before printing the error message.
* main.c (return_to_top_level): Print annotation before doing the
longjmp.
* symtab.c (decode_line_1): Call error not warning and then
return_to_top_level. Call error_begin and printf_unfiltered
rather calling warning (before calls to return_to_top_level).
* core.c (memory_error): Use error_begin, printf_unfiltered,
print_address_numeric and return_to_top_level instead of error.
Cleans up a FIXME-32x64.
* language.c (type_error, range_error): Call error_begin
not just target_terminal_ours.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
add a language parameter that is used to select the demangling
algorithm.
* defs.h (enum language): Move further up in file so enum can
be used in prototypes.
* defs.h (fputs_demangled): Update prototype to add lang arg.
* c-typeprint.c (cp_type_print_method_args): Add language arg
to fputs_demangled calls, remove DMGL_PARAMS flag.
* stack.c (print_frame_info): Remove obsolete code so we don't
have to update fputs_demangled usage in it.
* stack.c (print_frame_info, frame_info): Add language variable
to pass to fputs_demangled and initialize it from the symbol's
language. Call fputs_demangled with language arg.
* symtab.c (find_methods): Add language arg to fputs_demangled
call.
* defs.h (demangle_and_match): Remove prototype.
* dwarfread.c (STREQ, STREQN): Remove macros, replaced with STREQ
and STREQN defined in defs.h.
* dwarfread.c (set_cu_language): For completely unknown languages,
try to deduce the language from the filename. Retain behavior
that for known languages we don't know how to handle, we use
language_unknown.
* dwarfread.c (enum_type, symthesize_typedef): Initialize language
and demangled name fields in symbol.
* dwarfread.c, mipsread.c, partial-stab.h: For all usages of
ADD_PSYMBOL_TO_LIST, add language and objfile parameters.
* dwarfread.c (new_symbol): Attempt to demangle C++ symbol names
and cache the results in SYMBOL_DEMANGLED_NAME for the symbol.
* elfread.c (STREQ): Remove macro, use STREQ defined in defs.h.
Replace usages throughout.
* elfread.c (demangle.h): Include.
* elfread.c (record_minimal_symbol): Remove prototype and function.
* gdbtypes.h, symtab.h (B_SET, B_CLR, B_TST, B_TYPE, B_BYTES,
B_CLRALL): Moved from symtab.h to gdbtypes.h.
* infcmd.c (jump_command): Remove code to demangle name and add
it to a cleanup list. Now just use SYMBOL_DEMANGLED_NAME.
* minsyms.c (demangle.h): Include.
* minsyms.c (lookup_minimal_symbol): Indent comment to match code.
* minsyms.c (install_minimal_symbols): Attempt to demangle symbol
names as C++ names, and cache them in SYMBOL_DEMANGLED_NAME.
* mipsread.c (psymtab_language): Add static variable.
* stabsread.c (demangle.h): Include.
* stabsread.c (define_symbol): Attempt to demangle C++ symbol
names and cache them in the SYMBOL_DEMANGLED_NAME field.
* stack.c (return_command): Remove explicit demangling of name
and use of cleanups. Just use SYMBOL_DEMANGLED_NAME.
* symfile.c (demangle.h): Include.
* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Fix
to match macros in symfile.h and allow them to be compiled
if INLINE_ADD_PSYMBOL is not true.
* symfile.h (INLINE_ADD_PSYMBOL): Default to true if not set.
* symfile.h (ADD_PSYMBOL_*): Add language and objfile parameters.
Add code to demangle and cache C++ symbol names. Use macro form
if INLINE_ADD_PSYMBOL is true, otherwise use C function form.
* symmisc.c (add_psymbol_to_list, add_psymbol_addr_to_list):
Remove, also defined in symfile.c, which we already fixed.
* symtab.c (expensive_mangler): Remove prototype and function.
* symtab.c (find_methods): Remove physnames parameter and fix
prototype to match.
* symtab.c (completion_list_add_symbol): Name changed to
completion_list_add_name.
* symtab.c (COMPLETION_LIST_ADD_SYMBOL): New macro, adds both
the normal symbol name and the cached C++ demangled name.
* symtab.c (lookup_demangled_partial_symbol,
lookup_demangled_block_symbol): Remove prototypes and functions.
* symtab.c (lookup_symbol): Remove use of expensive_mangler,
use lookup_block_symbol instead of lookup_demangled_block_symbol.
Remove code to try demangling names and matching them.
* symtab.c (lookup_partial_symbol, lookup_block_symbol):
Fix to try matching the cached demangled name if no match is
found using the regular symbol name.
* symtab.c (find_methods): Remove unused physnames array.
* symtab.c (name_match, NAME_MATCH): Remove function and macro,
replaced with SYMBOL_MATCHES_REGEXP from symtab.h.
* symtab.c (completion_list_add_symbol): Rewrite to use cached
C++ demangled symbol names.
* symtab.h: Much reformatting of structures and such to add
whitespace to make them more readable, and make them more
consistent with other gdb structure definitions.
* symtab.h (general_symbol_info): New struct containing fields
common to all symbols.
* symtab.h (SYMBOL_LANGUAGE, SYMBOL_DEMANGLED_NAME,
SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME, SYMBOL_MATCHES_NAME,
SYMBOL_MATCHES_REGEXP, MSYMBOL_INFO, MSYMBOL_TYPE): New macros.
* symtab. (struct minimal_symbol, struct partial_symbol, struct
symbol): Use general_symbol_info struct.
* utils.c (demangle_and_match): Remove, no longer used.
* valops.c (demangle.h): Include.
* xcoffexec.c (eq): Remove macro, replace usages with STREQ.
* blockframe.c, breakpoint.c, c-exp.y, c-valprint.c, dbxread.c,
infcmd.c, m2-exp.y, minsyms.c, objfiles.h, solib.c, stack.c,
symmisc.c, symtab.c, valops.c: Replace references to minimal
symbol fields with appropriate macros.
* breakpoint.c, buildsym.c, c-exp.y, c-typeprint.c, c-valprint.c,
coffread.c, command.c, convex-tdep.c, cp-valprint.c, dbxread.c,
demangle.c, elfread.c, energize.c, environ.c, exec.c,
gdbtypes.c, i960-tdep.c, infrun.c, infrun-hacked.c, language.c,
main.c, minsyms.c, mipsread.c, partial-stab.h, remote-es1800.c,
remote-nindy.c, remote-udi.c, rs6000-tdep.c, solib.c, source.c,
sparc-pinsn.c, stabsread.c, standalone.c, state.c, stuff.c,
symfile.c, symmisc.c, symtab.c, symtab.h, tm-sysv4.h,
tm-ultra3.h, values.c, xcoffexec.c, xcoffread.c: Replace strcmp
and strncmp usages with STREQ, STREQN, or STRCMP as appropriate.
* breakpoint.c, buildsym.c, c-typeprint.c, expprint.c, findvar.c,
mipsread.c, printcmd.c, source.c, stabsread.c, stack.c,
symmisc.c, tm-29k.h, valops.c, values.c: Replace SYMBOL_NAME
references with SYMBOL_SOURCE_NAME or SYMBOL_LINKAGE_NAME as
appropriate.
* buildsym.c (start_subfile, patch_subfile_names): Default the
source language to what can be deduced from the filename.
* buildsym.c (end_symtab): Update the source language in the
allocated symtab to match what we have been using.
* buildsym.h (struct subfile): Add a language field.
* c-typeprint.c (c_print_type): Remove code to do explicit
demangling.
* dbxread.c (psymtab_language): Add static variable.
* dbxread.c (start_psymtab): Initialize psymtab_language using
deduce_language_from_filename.
* complaints.c (complain): Made into a varargs function.
* complaints.h: New file, code moved from symfile.h.
* Makefile.in (SFILES_MAINDIR): Add complaints.c.
* Makefile.in (HFILES): Add complaints.h.
* Makefile.in (OBS): Add complaints.o.
* symfile.c (complaint_root, stop_whining, complaint_series,
complain, clear_complaints, add_show_from_set for stop_whining):
Moved to complaints.c.
* symfile.h (struct complaint, complaint_root decl, complain
prototype, clear_complaints prototype): Moved to complaints.h.
* buildsym.c, coffread.c, dbxread.c, dwarfread.c, elfread.c,
gdbtypes.c, mipsread.c, stbsread.c, symfile.c: Include
complaints.h. Remove casts from arguments to complain(),
which is now a varargs function, and remove unnecessary
placeholder zero args.
* defs.h (begin_line): Add prototype.
* defs.h (vprintf_filtered): Add prototype.
* dwarfread.c (varargs.h): Remove, no longer needed.
* dwarfread.c (dwarfwarn): Remove prototype and function.
* dwarfread.c (complaints): Define a bunch of complaints.
* dwarfread.c (SQUAWK): Remove macro defs, convert all
usages to standard complain() calls.
* utils.c (begin_line): New function that ensures that
whatever gets filter-printed next starts on its own line.
* utils.c (vprintf_filtered): New func, like vfprintf_filtered,
but to stdout (calls vfprintf_filtered internally).
before printing anything, and again afterward. Fix comments.
(vfprintf_filtered): Eliminate static buffer; use auto buffer,
or alloca() if needed.
* rs6000-xdep.c: Use correct conditional (IBM6000_TARGET) to
detect native versus cross-host.
Fix from Jim Williams.
* stack.c (return_command): Evaluate expression *before* popping
off the stack frames! Fix inspired by Jim Williams.
(up_silently_command, down_silently_command): No sel frame is error.
* defs.h (memcpy, memset): Conditionalize decls on
#ifndef MEM_FNS_DECLARED, since DECstation differs.
(alloca): Break out the STDC and non-STDC alloca cases, to make
it work on old preprocessors as well as "picky ANSI" ones.
* xm-mips.h (memcpy, memset): Declare, and set MEM_FNS_DECLARED.
* mips-tdep.c (heuristic_proc_start): Zero arg produces zero.
* utils.c (fputs_demangled): Rename SLOP since DECstation system
header files define it!
symtab.h, tm-i386v4.h, valprint.c, values.c: Lint.
* breakpoint.c, c-exp.y, coffread.c, command.c, environ.c, eval.c,
findvar.c, infcmd.c, infptrace.c, infrun.c, m2-exp.y, parse.c,
putenv.c, solib.c, sparc-xdep.c, symtab.c, tm-i386v.h, tm-sparc.h,
utils.c, valarith.c, valops.c, valprint.c, values.c:
Replace bcopy() use with memcpy(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* breakpoint.c, buildsym.c, coffread.c, dbxread.c, i386-tdep.c,
ieee-float.c, infcmd.c, sparc-tdep.c, stack.c, symtab.c, symtab.h,
target.c, values.c:
Replace bzero() use with memset(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
* i386-tdep.c, main.c, valprint.c:
Replace bcmp() use with memcmp(), which is more standard and can
take advantage of gcc's builtin functions for increased performance.
It gets permanently stuck in many OSes.
* breakpoint.c, infcmd.c, infrun.c, utils.c: Change many printfs
to printf_filtered.
* breakpoint.c: Improve help text for info breakpoints.
libiberty/strsignal.c. Widespread changes to use libiberty/strerror.c
functions for errno manipulations and libiberty/strsignal.c for signo
(signals) manipulations.
* All GDB files that #include defs.h: Removed stdio.h.
(defs.h): #include stdio.h.
This has been tested by building GDBs for all targets hosted on Sun4.
None of the build problems were related to stdio.h inclusion. (n.b.
many configurations don't build for other reasons.)
to make prototypes for all functions declared here.
* cplus-dem.c: Avoid declaring xmalloc and xrealloc.
* c-exp.y: Rename SIGNED, OR, and AND to avoid conflict.
* environ.c: Include <stdio.h> before defs.h. Minor cleanup.
* ieee-float.h: Use PARAMS for prototypes; make some params const.
* ieee-float.c, valarith.c: Include <stdio.h>. Lint. b*=>mem*.
* m2-exp.y: Remove unused CONST; Rename OR and AND.
* utils.c: Avoid declaring malloc and realloc. Lint.
(request_quit): Accept signal-number parameter.
Change svr4 references to sysv4.
* source.c: Move declaration of external function index to
front of file so it is in scope for all references.
* utils.c (error, fatal): Make definitions consistent with
defs.h declarations (declared as "volatile void").
rather than jumping back to command level. Modules that want to print
their own warnings without calling warning() can call warning_setup() to
handle the terminal compatibly with warning() and error().
first.
* main.c (main, print_gnu_advertisement, print_gdb_version):
Reformat legalese so it always prints, but acts as an "I'm here"
message while symbols are being read. If any errors occur,
print a few newlines to set off the message and start it at the
left margin. Remove mention of "help" command, and don't yak about
symbol reading.
(catch_errors): Error string is now printed first in case of
error, not last.
* command.c (undef_cmd_error, lookup_cmd): On undefined command,
suggest the "help" command.
* Makefile.in (VERSION): Set to 4.0.2.
* core.c (core_open): Open file ourselves, read or r/w, depending on
write_files. Use bfd_fdopenr.
* gdbcore.h (write_files): New variable.
* exec.c (write_files): Define variable, add set&show for it.
(exec_file_command): Use write_files to open for read or r/write.
Make shared library reading happen automatically. These changes
are mostly from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>.
* inferior.h (stop_soon_quietly): Add to exported variables.
* infrun.c (child_create_inferior): call solib hook, if defined.
(child_attach): call solib hook, if defined.
* solib.c: Include inferior.h. Add from_tty to so_list as kludge.
(find_solib): Use lookup_misc_func rather than hand-rolled.
(symbol_add_stub): New stub for catch_errors.
(solib_add): Avoid output if !from_tty. Catch errors rather
than just calling symbol_file_add and bombing.
(solib_create_inferior_hook): Interface with the target process
to let it read and alloc shared libs, then figure out what it did.
* core.c (validate_files): Fix typo, soften warning.
(Fix from Hiroto Kagotani <kagotani@cs.titech.ac.jp>.)
* utils.c (fputs_demangled): Avoid duplicate printing if
demangling is off. (Fix from J.T. Conklin <jtc@cayenne.com>.)
* infrun.c (proceed): Cast -1 to (CORE_ADDR) before comparing.
(Fix from pierre@la.tce.com (Pierre Willard).)
* main.c (catch_errors): Change argument to a char * from an int,
since a char * can point to a struct full of glop, but an int
is not guaranteed to be able to hold a pointer.
* breakpoint.c (breakpoint_cond_eval, bpstat_stop_status,
breakpoint_re_set_one, breakpoint_re_set): Adapt.
* core.c (core_open, solib_add_stub): Adapt.
* remote-vx.c (symbol_stub, add_symbol_stub, callers): Adapt.
* tm-sparc.h (PC_ADJUST): Avoid calling error() from this;
it causes recursive calls to error() when used in cleanups.
To do so requires that we make it a function, so we do.
* sparc-tdep.c (sparc_pc_adjust): New implem of PC_ADJUST.
* utils.c (do_cleanups): Remove the current cleanup from the
chain *before* calling it, in case error() is called from it.
The result won't be pretty, but won't be an infinite loop either.
(long_options): Terminate with a zero element.
[Bugfix from Atsuo Kawaguchi <atsuo@hark86.harl.hitachi.co.jp>.]
(gdb_readline): Make call-compatible with readline.
(init_signals): Improve comments re vfork vs. signal.
* utils.c (prompt_for_continue): Use new gdb_readline().
If we prompt for continuation, we don't let CR repeat the previous
command, once we get back to a prompt. It's too easy to keep
hitting CR, expecting "--more--" prompts, and have some long
command start repeating on you.