0ab77f5fa2
test suite update - gdb.base/s*
...
Convert files gdb.base/s*.exp to use standard_output_file et al.
* gdb.base/save-bp.exp, gdb.base/savedregs.exp,
gdb.base/scope.exp, gdb.base/sep.exp, gdb.base/sepsymtab.exp,
gdb.base/set-lang-auto.exp, gdb.base/setshow.exp,
gdb.base/setvar.exp, gdb.base/shlib-call.exp,
gdb.base/shreloc.exp, gdb.base/sigall.exp,
gdb.base/sigaltstack.exp, gdb.base/sigbpt.exp,
gdb.base/sigchld.exp, gdb.base/siginfo-addr.exp,
gdb.base/siginfo-infcall.exp, gdb.base/siginfo-obj.exp,
gdb.base/siginfo.exp, gdb.base/signals.exp, gdb.base/signest.exp,
gdb.base/signull.exp, gdb.base/sigrepeat.exp,
gdb.base/sigstep.exp, gdb.base/sizeof.exp,
gdb.base/skip-solib.exp, gdb.base/so-impl-ld.exp,
gdb.base/solib-display.exp, gdb.base/solib-nodir.exp,
gdb.base/solib-overlap.exp, gdb.base/solib-symbol.exp,
gdb.base/solib-weak.exp, gdb.base/source.exp,
gdb.base/stack-checking.exp, gdb.base/stale-infcall.exp,
gdb.base/stap-probe.exp, gdb.base/start.exp,
gdb.base/step-break.exp, gdb.base/step-bt.exp,
gdb.base/step-line.exp, gdb.base/step-resume-infcall.exp,
gdb.base/step-test.exp, gdb.base/structs.exp,
gdb.base/structs2.exp, gdb.base/structs3.exp,
gdb.base/symbol-without-target_section.exp: Use standard_testfile,
standard_output_file, prepare_for_testing, clean_restart.
2013-06-27 18:58:28 +00:00
4ec7020176
Remove superfluous semicolons from testsuite throughout.
...
A few months ago semicolons after "return" were removed throughout the
testsuite. However, as I pointed out in review, they're unnecessary
not just after "return", but pretty much after any tcl command. ';'
is the command separator, and you only need it if there's another
command on the same line afterwards.
This patch was written by running:
$ find . -name "*.exp" | xargs grep -l ";\s*$" | xargs sed -i 's/\([^#][^\s*;]*\)\s*;\s*$/\1/'
and then undoing changes to comments, and lib/future.exp.
Tested on x86_64 Fedora 17.
gdb/testsuite/
2013-06-07 Pedro Alves <palves@redhat.com>
* boards/native-extended-gdbserver.exp: Remove semicolon.
* config/arm-ice.exp: Likewise.
* config/bfin.exp: Likewise.
* config/cygmon.exp: Likewise.
* config/h8300.exp: Likewise.
* config/monitor.exp: Likewise.
* config/sid.exp: Likewise.
* config/sim.exp: Likewise.
* config/slite.exp: Likewise.
* config/vx.exp: Likewise.
* gdb.arch/i386-bp_permanent.exp: Likewise.
* gdb.asm/asm-source.exp: Likewise.
* gdb.base/args.exp: Likewise.
* gdb.base/attach-pie-misread.exp: Likewise.
* gdb.base/auxv.exp: Likewise.
* gdb.base/bigcore.exp: Likewise.
* gdb.base/bitfields2.exp: Likewise.
* gdb.base/bitfields.exp: Likewise.
* gdb.base/break.exp: Likewise.
* gdb.base/break-interp.exp: Likewise.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/call-sc.exp: Likewise.
* gdb.base/commands.exp: Likewise.
* gdb.base/corefile.exp: Likewise.
* gdb.base/dbx.exp: Likewise.
* gdb.base/ending-run.exp: Likewise.
* gdb.base/exprs.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/huge.exp: Likewise.
* gdb.base/list.exp: Likewise.
* gdb.base/memattr.exp: Likewise.
* gdb.base/overlays.exp: Likewise.
* gdb.base/printcmds.exp: Likewise.
* gdb.base/recurse.exp: Likewise.
* gdb.base/remotetimeout.exp: Likewise.
* gdb.base/reread.exp: Likewise.
* gdb.base/savedregs.exp: Likewise.
* gdb.base/scope.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/setshow.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* gdb.base/sigaltstack.exp: Likewise.
* gdb.base/siginfo-addr.exp: Likewise.
* gdb.base/siginfo.exp: Likewise.
* gdb.base/siginfo-obj.exp: Likewise.
* gdb.base/sigrepeat.exp: Likewise.
* gdb.base/sigstep.exp: Likewise.
* gdb.base/structs.exp: Likewise.
* gdb.base/testenv.exp: Likewise.
* gdb.base/twice.exp: Likewise.
* gdb.base/valgrind-db-attach.exp: Likewise.
* gdb.base/valgrind-infcall.exp: Likewise.
* gdb.base/varargs.exp: Likewise.
* gdb.base/watchpoint.exp: Likewise.
* gdb.cp/gdb1355.exp: Likewise.
* gdb.cp/misc.exp: Likewise.
* gdb.disasm/hppa.exp: Likewise.
* gdb.disasm/t01_mov.exp: Likewise.
* gdb.disasm/t02_mova.exp: Likewise.
* gdb.disasm/t03_add.exp: Likewise.
* gdb.disasm/t04_sub.exp: Likewise.
* gdb.disasm/t05_cmp.exp: Likewise.
* gdb.disasm/t06_ari2.exp: Likewise.
* gdb.disasm/t07_ari3.exp: Likewise.
* gdb.disasm/t08_or.exp: Likewise.
* gdb.disasm/t09_xor.exp: Likewise.
* gdb.disasm/t10_and.exp: Likewise.
* gdb.disasm/t11_logs.exp: Likewise.
* gdb.disasm/t12_bit.exp: Likewise.
* gdb.disasm/t13_otr.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/mi-reverse.exp: Likewise.
* gdb.pascal/floats.exp: Likewise.
* gdb.python/py-inferior.exp: Likewise.
* gdb.threads/attach-into-signal.exp: Likewise.
* gdb.threads/pthreads.exp: Likewise.
* gdb.threads/thread_events.exp: Likewise.
* gdb.threads/watchthreads.exp: Likewise.
* gdb.trace/actions-changed.exp: Likewise.
* gdb.trace/actions.exp: Likewise.
* gdb.trace/ax.exp: Likewise.
* gdb.trace/backtrace.exp: Likewise.
* gdb.trace/change-loc.exp: Likewise.
* gdb.trace/deltrace.exp: Likewise.
* gdb.trace/disconnected-tracing.exp: Likewise.
* gdb.trace/ftrace.exp: Likewise.
* gdb.trace/infotrace.exp: Likewise.
* gdb.trace/passc-dyn.exp: Likewise.
* gdb.trace/passcount.exp: Likewise.
* gdb.trace/pending.exp: Likewise.
* gdb.trace/qtro.exp: Likewise.
* gdb.trace/range-stepping.exp: Likewise.
* gdb.trace/report.exp: Likewise.
* gdb.trace/save-trace.exp: Likewise.
* gdb.trace/status-stop.exp: Likewise.
* gdb.trace/strace.exp: Likewise.
* gdb.trace/tfile.exp: Likewise.
* gdb.trace/tfind.exp: Likewise.
* gdb.trace/trace-break.exp: Likewise.
* gdb.trace/tracecmd.exp: Likewise.
* gdb.trace/trace-mt.exp: Likewise.
* gdb.trace/tspeed.exp: Likewise.
* gdb.trace/tsv.exp: Likewise.
* gdb.trace/while-stepping.exp: Likewise.
* lib/gdb.exp: Likewise.
* lib/gdbserver-support.exp: Likewise.
* lib/java.exp: Likewise.
* lib/mi-support.exp: Likewise.
* lib/pascal.exp: Likewise.
* lib/prompt.exp: Likewise.
* lib/trace-support.exp: Likewise.
2013-06-07 17:31:09 +00:00
4aa995e123
2009-02-06 Pedro Alves <pedro@codesourcery.com>
...
gdb/
* target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
* infrun.c (siginfo_value_read, siginfo_value_write): New.
(siginfo_value_funcs): New.
(siginfo_make_value): New.
(_initialize_infrun): Create the $_siginfo convenience variable.
* gdbtypes.h (append_composite_type_field_aligned): Declare.
* gdbtypes.c (append_composite_type_field): Rename to...
(append_composite_type_field_aligned): ... this. Add ALIGNMENT
argument. Handle it.
(append_composite_type_field): Rewrite on top of
append_composite_type_field_aligned.
* value.h (internalvar_make_value): New typedef.
(struct internalvar) <make_value>: New field.
(create_internalvar_type_lazy): Declare.
* value.c (create_internalvar): Clear make_value.
(create_internalvar_type_lazy): New.
(value_of_internalvar): If make_value is set use it.
(preserve_values): Skip internal variables that don't have a
value.
* gdbarch.sh (get_siginfo_type): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.h, linux-tdep.c: New.
* amd64-linux-tdep.c: Include "linux-tdep.h".
(amd64_linux_init_abi): Register linux_get_siginfo_type and
linux_get_siginfo_mapper.
* i386-linux-tdep.c: Include "linux-tdep.h".
(i386_linux_init_abi): Register linux_get_siginfo_type and
linux_get_siginfo_mapper.
* arm-linux-tdep.c: Include "linux-tdep.h".
(i386_linux_init_abi): Register linux_get_siginfo_type and
linux_get_siginfo_mapper.
* linux-nat.c (linux_xfer_siginfo): New.
(linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
* remote.c (PACKET_qXfer_siginfo_read)
(PACKET_qXfer_siginfo_write): New.
(feature remote_protocol_features): Add "qXfer:siginfo:read" and
"qXfer:siginfo:write" features.
(remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
(_initialize_remote): Add "set/show remote read-siginfo-object"
and "set/show remote write-siginfo-object" commands.
* Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
(HFILES_NO_SRCDIR): Add linux-tdep.h.
(ALLDEPFILES): Add linux-tdep.c.
* configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
(i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
gdb_target_obs.
2009-02-06 Pedro Alves <pedro@codesourcery.com>
gdb/gdbserver/
* server.c (handle_query): Report qXfer:siginfo:read and
qXfer:siginfo:write as supported and handle them.
* target.h (struct target_ops) <qxfer_siginfo>: New field.
* linux-low.c (linux_xfer_siginfo): New.
(linux_target_ops): Set it.
2009-02-06 Pedro Alves <pedro@codesourcery.com>
gdb/doc/
* gdb.texinfo (Signals): Document $_siginfo.
(Convenience Variables): Mention $_siginfo.
(Remote Configuration): Document qXfer:siginfo:read,
qXfer:siginfo:write packets, and the read-siginfo-object,
write-siginfo-object commands.
2009-02-06 Pedro Alves <pedro@codesourcery.com>
gdb/testsuite/
* gdb.base/siginfo-obj.c, gdb.base/siginfo-obj.exp: New.
2009-02-06 22:59:01 +00:00
Tom Tromey
Pedro Alves
Joel Brobecker