2019-02-19 Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com>
gold/
PR gold/23870
* aarch64.cc (Target_aarch64::Scan::global): Check if a symbol with
R_AARCH64_MOVW_.ABS_* relocations requires a PLT entry.
* testsuite/Makefile.am: Add aarch64_pr23870 test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_pr23870_bar.c: New file.
* testsuite/aarch64_pr23870_foo.c: New file.
* testsuite/aarch64_pr23870_main.S: New file.
This test checks code layout by function symbol ordering, but that
doesn't work on powerpc64 ELFv1 where the function symbol is on a
descriptor. A simple work-around is to have nm emit synthetic symbols
marking the code entry point of functions. Since the text segment is
laid out before the data segment, the synthetic symbols will have
lower addresses than function descriptor symbols and be seen first in
nm -n output.
On other targets, nm --synthetic typically emits symbols on plt
entries. Since the testcase doesn't call any of the functions of
interest there shouldn't be plt entries for those functions, so there
should be no potentially confusing extra symbols.
* testsuite/Makefile.am (keep_text_section_prefix_nm.stdout):
Pass --synthetic to nm.
* testsuite/Makefile.in: Regenerate.
PR 21128
* testsuite/icf_safe_so_test.sh (check_fold): Rewrite to check
multiple symbols at once.
(arch_specific_safe_fold): Likewise, and call with the four foo*
symbols expected to fold.
This test fails on powerpc64le due to the justsyms_lib being built
with exported_data at 0x2010000, apparently due to the powerpc target
code generating an empty relro .branch_lt section. Since the test
relies on the library having exported_data at 0x2000000, avoid the
problem by linking with -z norelro. Also, the test doesn't need to
avoid checking the function symbol on powerpc elfv2.
* testsuite/Makefile.am (justsyms_lib): Link with -z norelro.
* testsuite/Makefile.in: Regenerate.
* testsuite/justsyms_exec.c (main): Do check exported_func
on PowerPC64 ELFv2.
PowerPC64 ELFv2 uses the top 3 bits of st_other to encode a function's
local entry point offset from its global entry point. Allow st_other
bits except for visibility==default.
* testsuite/ver_test_14.sh: Accept objdump -T display of st_other
bits on powerpc64le.
The patch allows the gold testsuite to pass when using something like
the following configure line, which works for the rest of the binutils
testsuite. At least, it does if you don't configure your gcc with any
of the options that force a particular path to as or ld.
gccdir="/home/alan/build/gcc/prev-"
gccsrc="/home/alan/src/gcc.git"
gcctarg="x86_64-linux"
CC="${gccdir}gcc/xgcc -B${gccdir}gcc/" \
CXX="${gccdir}gcc/xg++ -B${gccdir}gcc/ -I${gccdir}$gcctarg/libstdc++-v3/include -I${gccdir}$gcctarg/libstdc++-v3/include/$gcctarg -I${gccsrc}/libstdc++-v3/libsupc++ -L${gccdir}$gcctarg/libstdc++-v3/src/.libs/" \
~/src/binutils-gdb/configure ...
gold's -Bgcctestdir/ option must come before the -B supplied by $CC
or $CXX, in order to pick up the linker we want to test. Also when
using a not-yet-installed gcc, it is necessary to provide a collect-ld
in gcctestdir/ as otherwise a collect-ld script in -B${gccdir}gcc/
will be used and the wrong linker tested.
Besides this, the patch fixes some bugs: The $COMPILE -D_FORTIFY_SOURCE
edit was wrong (but worked for usual values), and the $CXXLINK_S edit
unnecessarily but harmlessly used extra backslash quoting. See
posix shell documentation regarding quoting, or
www.gnu.org/software/bash/manual/bashref.html#Command-Substitution
Also, -Bgcctestdir/ in one place makes it less likely a new test will
be added that accidentally lacks the option.
* Makefile.am (gcctestdir1/ld): Use $@ and absolute paths.
(gcctestdir1/collect-ld): New.
(ld1_DEPENDENCIES): Add gcctestdir1/collect-ld.
(ld1_LDFLAGS): Remove -Bgcctestdir1/.
(editcc1, ld1_LINK): Define.
(gcctestdir2/ld, gcctestdir2/collect-ld, ld2_DEPENDENCIES),
(ld2_LDFLAGS, editcc2, ld2_LINK),
(ld1_r_DEPENDENCIES, ld1_r_LDFLAGS, ld1_r_LINK),
(gcctestdir2-r/ld, gcctestdir2-r/collect-ld, ld2_r_DEPENDENCIES),
(ld2_r_LDFLAGS, editcc2r, ld2_r_LINK),
(gcctestdir3/ld, gcctestdir3/collect-ld, ld3_DEPENDENCIES),
(ld3_LDFLAGS, editcc3, ld3_LINK),
(gcctestdir4/ld, gcctestdir4/collect-ld, ld4_DEPENDENCIES),
(ld4_LDFLAGS, editcc4, ld4_LINK): Similarly.
* Makefile.in: Regenerate.
* testsuite/Makefile.am (editcc): Define sed command to put
our -B option first. Remove other occurrences of -Bgcctestdir/
throughout file.
(editcc1): Define for -D_FORTIFY_SOURCE stripping.
(editcc2): Define for -static-libgcc/libstdc++ stripping.
(LINK1, CXXLINK1): Don't use CCLD or CXXLD.
(CCLD, CXXLD, COMPILE, LINK, CXXCOMPILE, CXXLINK, CXXLINK_S): Define
using editcc macros.
(gcctestdir/collect-ld): New rule, add as a dependency of..
(gcctestdir/ld): ..this. Use $@ and abs_top_buildir.
(gcctestdir/as): Use $@.
* testsuite/Makefile.in: Regenerate.
* testsuite/incremental_test.sh (actual): Match collect-ld too.
Cleans a few more test files.
* Makefile.am (MOSTLYCLEANFILES): Define.
* Makefile.in: Regnerate.
* testsuite/Makefile.am (MOSTLYCLEANFILES): Add ver_test_14 and
gnu_property_test.
* testsuite/Makefile.in: Regnerate.
When an .eh_frame section has deferred layout because of plugins, gold
was neglecting to mark the section as deferred. When we later processed
the corresponding relocation section, we were then ignoring it, causing
the internal error later on in the link.
gold/
PR gold/23397
* object.cc (Sized_relobj_file::do_layout): Mark section as deferred.
* testsuite/Makefile.am (plugin_test_1): Add --emit-relocs option to
existing test case.
* testsuite/Makefile.in: Regenerate.
When generating _end, _edata, etc. symbols, and a version script provides
a version name, and we are linking against another shared library that
provides those symbols with a different version, gold ends up trying to
resolve the other shared library's symbols to the new definitions, resulting
in two copies of each symbol, one as default, and one as non-default.
This patch tests for that condition, and ignores the symbols provided
by the other shared library.
gold/
PR gold/23409
* symtab.cc (Symbol_table::define_special_symbol): Add check for
version name on existing symbol.
* testsuite/Makefile.am (ver_test_pr23409): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ver_test_pr23409.sh: New test script.
* testsuite/ver_test_pr23409_1.script: New version script.
* testsuite/ver_test_pr23409_2.script: New version script.
The original patch did not give the target enough hooks to discover that
an input object file does not have a particular property. For the
GNU_PROPERTY_X86_FEATURE_1_AND property, for example, where a missing
property should be assumed to be all zeroes, and ANDed with other
object modules, this is essential. We now store the target-specific
properties locally in the Target structure as native uint32_t fields,
then AND the per-object feature bits with the program's feature bits
when we're finished processing each input object file. The target-specific
properties are then added back to the output note section during
finalization.
gold/
PR gold/22914
* layout.cc (read_sized_value): Fix spelling of section name.
(Layout::layout_gnu_property): Call Sized_target::record_gnu_property
for target-specific properties;
don't store them with target-independent properties yet.
(Layout::merge_gnu_properties): New method.
(Layout::add_gnu_property): New method.
(Layout::create_gnu_properties_note): Call target to finalize
target-specific properties. Fix spelling of output section name.
* layout.h (Layout::merge_gnu_properties): New method.
(Layout::add_gnu_property): New method.
* object.cc (Sized_relobj_file::do_layout): Call
Layout::merge_gnu_properties.
* target.h (Target::merge_gnu_property): Remove.
(Target::finalize_gnu_properties): New method.
(Target::do_merge_gnu_property): Move to Sized_target and rename.
(Target::do_finalize_gnu_properties): New virtual method.
(Sized_target::record_gnu_property): Moved and renamed from
Target::do_merge_gnu_property.
(Sized_target::merge_gnu_properties): New virtual method.
* x86_64.cc (Target_x86_64::isa_1_used_, isa_1_needed_)
(feature_1_, object_feature_1_, seen_first_object_): New data members.
(Target_x86_64::do_merge_gnu_property): Rename to ...
(Target_x86_64::record_gnu_property): ... this. Save target-specific
properties in Target class object.
(Target_x86_64::merge_gnu_properties): New method.
(add_property): New static inline function.
(Target_x86_64::do_finalize_gnu_properties): New method.
* testsuite/Makefile.am (gnu_property_test): Remove C source file;
link directly without compiler driver.
* testsuite/Makefile.in: Regenerate.
* testsuite/gnu_property_a.S: Add _start.
elfcpp/
PR gold/22914
* elfcpp.h (NT_GNU_PROPERTY_TYPE_0): New note type.
(GNU_PROPERTY_*): New Gnu property types.
* x86_64.h (GNU_PROPERTY_X86_FEATURE_1_IBT)
(GNU_PROPERTY_X86_FEATURE_1_SHSTK): New x86 feature bits.
gold/
PR gold/22914
* layout.cc (Layout::Layout): Initialize gnu_properties_.
(read_sized_value, write_sized_value): New functions.
(Layout::layout_gnu_property): New method.
(Layout::create_notes): Call create_gnu_properties_note.
(Layout::create_gnu_properties_note): New method.
* layout.h (Layout::layout_gnu_property): New method.
(Layout::create_gnu_properties_note): New method.
(Layout::Gnu_property, Layout::Gnu_properties): New types.
(Layout::gnu_properties_): New data member.
* object.cc (Sized_relobj_file::layout_gnu_property_section): New
method.
(Sized_relobj_file::do_layout): Handle .note.gnu.property sections.
* object.h (Sized_relobj_file::layout_gnu_property_section): New
method.
* target.h (Target::merge_gnu_property): New method.
(Target::do_merge_gnu_property): New virtual method.
* x86_64.cc (Target_x86_64::do_merge_gnu_property): New method.
* testsuite/Makefile.am (gnu_property_test): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/gnu_property_a.S: New source file.
* testsuite/gnu_property_b.S: New source file.
* testsuite/gnu_property_c.S: New source file.
* testsuite/gnu_property_main.c: New source file.
* testsuite/gnu_property_test.sh: New test script.
When we have a weak reference to a symbol defined in an
as-needed library, and that library ends up not-needed, gold
simply clears the version information in the symbol table, even
if the symbol could have been resolved by a needed library later
in the link order. This results in a loss of version information,
which can cause the program to bind to the wrong version at run
time.
This patch lets a dynamic definition override an earlier one if
the earlier one is from a not-needed library, so that we can
retain the version information from the binding to the needed
library. In order to do that, the tracking of needed/not-needed
had to be moved up to symbol resolution time, instead of during
Symbol_table::set_dynsym_indexes().
In cases where we still end up discarding version information,
I've added a warning.
For the original problem report and discussion, see:
https://stackoverflow.com/questions/50751421/undefined-behavior-in-shared-lib-using-libpthread-but-not-having-it-in-elf-as-d
gold/
* resolve.cc (Symbol_table::resolve): Rename tobinding to
orig_tobinding. Call set_is_needed() for objects that resolve
non-weak references.
(Symbol_table::should_override): Allow a dynamic definition to
override an earlier one in a not-needed library.
* symtab.cc (Symbol_table::set_dynsym_indexes): Remove separate
processing for as-needed symbols. Add warning when discarding
version informatin.
* testsuite/Makefile.am (weak_as_needed): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/weak_as_needed.sh: New test script.
* testsuite/weak_as_needed_a.c: New source file.
* testsuite/weak_as_needed_b.c: New source file.
* testsuite/weak_as_needed_b.script: New version script.
* testsuite/weak_as_needed_c.c: New source file.
* testsuite/weak_as_needed_c.script: New version script.
gold/
PR gold/23268
* dynobj.cc (Versions::Versions): Change init for needs_base_version_.
(Versions::record_version): Add verdefs for both shared objects and
executables.
(Versions::add_def): Likewise for base version.
(Versions::add_need): Don't add base version for executables.
(Versions::version_index): Look up version for both shared objects and
executables.
* testsuite/Makefile.am (ver_test_14): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ver_test_14.script: New version script.
* testsuite/ver_test_14.sh: New test script.
The autotools library macro (AX_PTHREAD) is now used to detect if
pthreads is present and multi-threaded linking in gold is automatically
enabled if it is found. This enables multi-threaded gold on platforms
where pthreads is enabled via other methods than just -lpthread
(e.g., MinGW).
2018-06-19 Joshua Watt <jpewhacker@gmail.com>
Cary Coutant <ccoutant@gmail.com>
gold/
* configure.ac: Replace manual thread configuration with AX_PTHREAD.
Add --enable-threads=auto.
* Makefile.am (THREADFLAGS, THREADLIBS): New defines.
(AM_CFLAGS, AM_CXXFLAGS): Add $(THREADFLAGS.
(THREADSLIB): Remove; change all references to THREADLIBS.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* testsuite/Makefile.am (THREADSLIB): Replace with...
(THREADFLAGS, THREADLIBS): ... these.
(LDADD): Remove; add as individual defines for...
(object_unittest, binary_unittest, leb128_unittest)
(overflow_unittest): ... these tests.
(tls_test, tls_pic_test, tls_pie_test, tls_pie_pic_test)
(tls_shared_test, tls_shared_ie_test, tls_shared_gd_to_ie_test)
(tls_shared_gnu2_gd_to_ie_test, tls_shared_gnu2_test_LDFLAGS)
(tls_shared_nonpic_test_LDFLAGS): Add $(THREADFLAGS) and ($THREADLIBS).
* testsuite/Makefile.in: Regenerate.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
gold/
PR gold/16504
* dynobj.cc (Versions::symbol_section_contents): Don't set
VERSYM_HIDDEN flag for undefined symbols.
* symtab.cc (Symbol_table::add_from_object): Don't override default
version definition with a different default version.
* symtab.h (Symbol::from_dyn): New method.
* testsuite/plugin_test.c (struct sym_info): Add ver field.
(claim_file_hook): Pass symbol version to plugin API.
(parse_readelf_line): Parse symbol version.
* testsuite/Makefile.am (ver_test_pr16504): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ver_test_pr16504.sh: New test script.
* testsuite/ver_test_pr16504_a.c: New source file.
* testsuite/ver_test_pr16504_a.script: New version script.
* testsuite/ver_test_pr16504_b.c: New source file.
* testsuite/ver_test_pr16504_b.script: New version script.
During a -r (or --emit-relocs) link, if two sections had the same name but
different section types, gold would put relocations for both sections into
the same relocation section even though the data sections remained separate.
For .eh_frame sections, when one section is PROGBITS and another is
X86_64_UNWIND, we really should be using the UNWIND section type and
combining the sections anyway. For other sections, we should be
creating one relocation section for each output data section.
gold/
PR gold/23016
* incremental.cc (can_incremental_update): Check for unwind section
type.
* layout.h (Layout::layout): Add sh_type parameter.
* layout.cc (Layout::layout): Likewise.
(Layout::layout_reloc): Create new output reloc section if data
section does not already have one.
(Layout::layout_eh_frame): Check for unwind section type.
(Layout::make_eh_frame_section): Use unwind section type for .eh_frame
and .eh_frame_hdr.
* object.h (Sized_relobj_file::Shdr_write): New typedef.
(Sized_relobj_file::layout_section): Add sh_type parameter.
(Sized_relobj_file::Deferred_layout::Deferred_layout): Add sh_type
parameter.
* object.cc (Sized_relobj_file::check_eh_frame_flags): Check for
unwind section type.
(Sized_relobj_file::layout_section): Add sh_type parameter; pass it
to Layout::layout.
(Sized_relobj_file::do_layout): Make local copy of sh_type.
Force .eh_frame sections to unwind section type.
Pass sh_type to layout_section.
(Sized_relobj_file<size, big_endian>::do_layout_deferred_sections):
Pass sh_type to layout_section.
* output.cc (Output_section::Output_section): Initialize reloc_section_.
* output.h (Output_section::reloc_section): New method.
(Output_section::set_reloc_section): New method.
(Output_section::reloc_section_): New data member.
* target.h (Target::unwind_section_type): New method.
(Target::Target_info::unwind_section_type): New data member.
* aarch64.cc (aarch64_info): Add unwind_section_type.
* arm.cc (arm_info, arm_nacl_info): Likewise.
* i386.cc (i386_info, i386_nacl_info, iamcu_info): Likewise.
* mips.cc (mips_info, mips_nacl_info): Likewise.
* powerpc.cc (powerpc_info): Likewise.
* s390.cc (s390_info): Likewise.
* sparc.cc (sparc_info): Likewise.
* tilegx.cc (tilegx_info): Likewise.
* x86_64.cc (x86_64_info, x86_64_nacl_info): Likewise.
* testsuite/Makefile.am (pr23016_1, pr23016_2): New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/testfile.cc: Add unwind_section_type.
* testsuite/pr23016_1.sh: New test script.
* testsuite/pr23016_1a.s: New source file.
* testsuite/pr23016_1b.s: New source file.
* testsuite/pr23016_2.sh: New test script.
* testsuite/pr23016_2a.s: New source file.
* testsuite/pr23016_2b.s: New source file.
In PR 22868, two IR files provide conflicting visibility for a symbol.
When a def with PROTECTED visibility is seen after a def with DEFAULT
visibility, gold does not override the visibility. Later, if the
replacement object define the symbol with DEFAULT visibility, the symbol
remains DEFAULT. This was caused by a recent change to allow multiply-defined
absolute symbols, combined with the fact that the plugin framework was using
SHN_ABS as the section index for placeholder symbols. The solution is to
use a real (but arbitrary) section index.
gold/
PR gold/22868
* plugin.cc (Sized_pluginobj::do_add_symbols): Use a real section
index instead of SHN_ABS for defined symbols.
* testsuite/Makefile.am (plugin_pr22868): New test case.
* testsuite/Makefile.in: Regenerate
* testsuite/plugin_pr22868.sh: New test script.
* testsuite/plugin_pr22868_a.c: New source file.
* testsuite/plugin_pr22868_b.c: New source file.
This option does not merge certain text sections with prefixes
.text.hot, .text.unlikely, .text.startup and .text.exit.
* layout.cc (Layout::default_section_order): Check for text section
prefixes.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
(Layout::output_section_name): Check for text section prefixes.
* layout.h (Output_section_order::ORDER_TEXT_HOT): New enum value.
(Output_section_order::ORDER_TEXT_STARTUP): New enum value.
(Output_section_order::ORDER_TEXT_EXIT): New enum value.
(Output_section_order::ORDER_TEXT_UNLIKELY): New enum value.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
* options.h (keep_text_section_prefix): New -z option.
* testsuite/Makefile.am (keep_text_section_prefix): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/keep_text_section_prefix.cc: New test source.
* testsuite/keep_text_section_prefix.sh: New test script.
2018-02-07 Sriraman Tallam <tmsriram@google.com>
* expression.cc (Symbol_expression::set_expr_sym_in_real_elf):
New method.
(Unary_expression::set_expr_sym_in_real_elf): New method.
(Binary_expression::set_expr_sym_in_real_elf): New method.
(Trinary_expression::set_expr_sym_in_real_elf): New method.
* plugin.cc (get_symbol_resolution_info): Fix symbol resolution if
defined or used in defsyms.
* plugin.h (Plugin_manager::is_defsym_def): New method.
(Plugin_manager::Plugin_manager): Initialize defsym_defines_set_.
(Plugin_manager::defsym_defines_set_): New member.
(Plugin_manager::Defsym_defines_set): New typedef.
* script.cc (Script_options::set_defsym_uses_in_real_elf): New method.
(Script_options::find_defsym_defs): New method.
* script.h (Expression::set_expr_sym_in_real_elf): New method.
(Symbol_assignment::is_defsym): New method.
(Symbol_assignment::value): New method.
(Script_options::find_defsym_defs): New method.
(Script_options::set_defsym_uses_in_real_elf): New method.
* testsuite/Makefile.am (plugin_test_defsym): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_test.c: Check for new symbol resolution.
* testsuite/plugin_test_defsym.sh: New script.
* testsuite/plugin_test_defsym.c: New test source.
Gold plugins may wish to further process an input file added by a plugin. For
example, the plugin may need to assign a unique segment for sections in a
plugin-generated input file. This patch adds a plugin callback that the linker
will call when reading symbols from a new input file added after the
all_symbols_read event (i.e. an input file added by a plugin).
2017-12-11 Stephen Crane <sjc@immunant.com>
* plugin-api.h: Add new plugin hook to allow processing of input
files added by a plugin.
(ld_plugin_new_input_handler): New function hook type.
(ld_plugin_register_new_input): New interface.
(LDPT_REGISTER_NEW_INPUT_HOOK): New enum val.
(tv_register_new_input): New member.
* plugin.cc (Plugin::load): Include hooks for register_new_input
in transfer vector.
(Plugin::new_input): New function.
(register_new_input): New function.
(Plugin_manager::claim_file): Call Plugin::new_input if in
replacement phase.
* plugin.h (Plugin::set_new_input_handler): New function.
* testsuite/plugin_new_section_layout.c: New plugin to test
new_input plugin API.
* testsuite/plugin_final_layout.sh: Add new input test.
* testsuite/Makefile.am (plugin_layout_new_file): New test case.
* testsuite/Makefile.in: Regenerate.
This is a partial fix for the gold testsuite failures documented in
PR 21090. The use of -fpie triggers some mov-to-lea optimizations that
are not compatible with incremental linking, so those optimizations need
to be disabled. We also diagnose the attempt to use -pie with incremental
linking, and force -no-pie for the incremental tests in case the build has
been configured to have GCC pass -pie all the time.
We still have a problem where compiling with -fpie results in some GOT
entries even when linking with -no-pie. This combination still causes test
failures because we are not updating the GOT entries in an incremental update
link.
gold/
PR gold/21090
* incremental.cc (Sized_relobj_incr::do_relocate): Fix comment.
* options.cc (General_options::finalize): Disallow -pie with
incremental linking.
* x86_64.cc (Target_x86_64::Scan::local): Don't do mov-to-lea
or callq-to-direct optimizations for incremental links.
(Target_x86_64::Scan::global): Likewise.
(Target_x86_64::Relocate::relocate): Likewise.
* testsuite/Makefile.am (incremental_test): Force -no-pie.
(incremental_test_2): Likewise.
(incremental_test_3): Likewise.
(incremental_test_4): Likewise.
(incremental_test_5): Likewise.
(incremental_test_6): Likewise.
(incremental_copy_test): Likewise.
(incremental_common_test_1): Likewise.
(incremental_comdat_test_1): Likewise.
* testsuite/Makefile.in: Regenerate.
With the new compiler, we're running out of patch space for the .eh_frame
section. To workaround that issue, we compile the before and after versions
both with no unwind tables.
gold/
PR gold/22309
* testsuite/Makefile.am (two_file_test_1_v1_ndebug.o): Compile with
no EH information.
(two_file_test_1_ndebug.o): Likewise.
* testsuite/Makefile.in: Regenerate.
* testsuite/two_file_test_1.cc: Touch to force recompilation with new
flags.
* testsuite/two_file_test_1_v1.cc: Likewise.
The problem is that while the command line isn't trivially empty,
it contains no input files. As gold tries to configure the number
of threads to use based on the number of input files, this causes
the assertion failure above. Fix this problem by making the logic
in gold.cc more robust and also adding a better error message
about --start-lib to options.cc.
gold/
PR gold/22406
* gold.cc (queue_initial_tasks) Check for number of real input files.
* options.cc (Command_line::process) Check for unterminated --start-lib
options.
* testsuite/Makefile.am: Add new test script.
* testsuite/Makefile.in: Regenerate.
* testsuite/check_empty_command_lines.sh: New test script.
This patch fixes the build with GCC 4.2:
gold/testsuite/pr22266_a.c:13:2: error: no newline at end of file
* testsuite/pr22266_a.c: Add a newline at end of file.
The fix for PR 19291 broke some other cases where -r is used with scripts,
as reported in PR 22266. The original fix for PR 22266 ended up breaking
many cases for REL targets, where the addends are stored in the section data,
and are not being adjusted properly.
The problem was basically that in a relocatable output file (ET_REL),
symbol values are supposed to be relative to the start address of their
section. Usually in a relocatable file, all sections start at 0, so the
failure to get this right is often irrelevant, but with a linker script,
we occasionally see an output section whose starting address is not 0,
and gold would occasionally write a symbol with its relocated value instead
of its section-relative value.
This patch reverts the recent fix for PR 22266 as well as my original fix
for PR 19291. The original fix moved the symbol value adjustment to
write_local_symbols, but neglected to undo a few places where the adjustment
was also being applied, resulting in an occasional double adjustment. The
more recent fix removed those other adjustments, but then failed to
re-account for the adjustment when rewriting the relocations on REL targets.
With the old attempts reverted, we now apply the symbol value adjustment to
the one case that had been missed (non-section symbols in merge sections).
But now we also need to account for the adjustment when rewriting the addends
for RELA relocations.
gold/
PR gold/19291
PR gold/22266
* object.cc (Sized_relobj_file::compute_final_local_value_internal):
Revert changes from 2017-11-08 patch. Adjust symbol value in
relocatable links for non-section symbols.
(Sized_relobj_file::compute_final_local_value): Revert changes from
2017-11-08 patch.
(Sized_relobj_file::do_finalize_local_symbols): Likewise.
(Sized_relobj_file::write_local_symbols): Revert changes from
2015-11-25 patch.
* object.h (Sized_relobj_file::compute_final_local_value_internal):
Revert changes from 2017-11-08 patch.
* powerpc.cc (Target_powerpc::relocate_relocs): Adjust addend for
relocatable links.
* target-reloc.h (relocate_relocs): Adjust addend for relocatable links.
* testsuite/pr22266_a.c (hello): New function.
* testsuite/pr22266_main.c (main): Add test for merge sections.
* testsuite/pr22266_script.t: Add rule for .rodata.
The fix committed for PR gold/19291 ended up breaking other cases. The
commit added adjustment code to write_local_symbols, but in many cases
compute_final_local_value_internal had already subtracted the output
section's address. To fix this, all other adjustments are now removed, so
only the one in write_local_symbols is left.
gold/
PR gold/22266
* object.cc (Sized_relobj_file::compute_final_local_value_internal):
Drop relocatable parameter and stop adjusting output value based on
it.
(Sized_relobj_file::compute_final_local_value): Stop passing
relocatable to compute_final_local_value_internal.
(Sized_relobj_file::do_finalize_local_symbols): Ditto.
* object.h (Sized_relobj_file::compute_final_local_value_internal):
Drop relocatable parameter.
2017-10-04 Sriraman Tallam <tmsriram@google.com>
* options.h (-z,text_unlikely_segment): New option.
* layout.cc (Layout::layout): Create new output section
for .text.unlikely sections with the new option.
(Layout::segment_precedes): Check for the new option
when segment flags match.
* testsuite/text_unlikely_segment.cc: New test source.
* testsuite/text_unlikely_segment.sh: New test script.
* testsuite/Makefile.am (text_unlikely_segment): New test.
* testsuite/Makefile.in: Regenerate.
gold/
* arm.cc (Stub::do_fixed_endian_write):Far call stubs support for arm
in the be8 mode.
* testsuite/Makefile.am: New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/arm_farcall_arm_arm_be8.sh: New script for arm to arm far
call stubs.
* testsuite/arm_farcall_thumb_thumb_be8.sh: New script for thumb to
thumb far call stubs.
2017-09-20 Teresa Johnson <tejohnson@google.com>
* plugin.cc (is_visible_from_outside): Check for export dynamic symbol
option and list.
* testsuite/Makefile.am (plugin_test_12): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/export_dynamic_plugin.cc: New test source.
* testsuite/plugin_test_12.sh: New test script.
If a custom linker script with an unexpected relative layout of .got
and .got.plt sections was used, gold might produce a wrong offset
when applying R_AARCH64_TLSDESC_* relocations.
This patch fixes the issue by calculating "got_tlsdesc_offset"
in a more direct way.
gold/
* aarch64.cc (Target_aarch64::Relocate::relocate_tls):
Make got_tlsdesc_offset signed and fix its calculation.
* testsuite/Makefile.am (aarch64_tlsdesc): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_tlsdesc.s: New test source file.
* testsuite/aarch64_tlsdesc.sh: New test script.
* testsuite/aarch64_tlsdesc.t: New test linker script.
gold/ChangeLog
PR gold/21430
* aarch64.cc
(AArch64_relobj::convert_input_section_to_relaxed_section):
Set the section offset to -1ULL.
(Target_aarch64::relocate_section): Adjust the view in case
of a relaxed input section.
* testsuite/Makefile.am (pr21430): New test.
* testsuite/Makefile.in: Regenerate
* testsuite/pr21430.s: New test source file.
* testsuite/pr21430.sh: New test script.
gold/
* x86_64.cc (Target_x86_64::do_can_check_for_function_pointers):
Return true even when building pie binaries.
(Target_x86_64::possible_function_pointer_reloc): Check opcode
for R_X86_64_PC32 relocations.
(Target_x86_64::local_reloc_may_be_function_pointer): Pass
extra arguments to local_reloc_may_be_function_pointer.
(Target_x86_64::global_reloc_may_be_function_pointer): Likewise.
* gc.h (gc_process_relocs): Add check for STT_FUNC.
* testsuite/Makefile.am (icf_safe_pie_test): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/icf_safe_pie_test.sh: New shell script.
PowerPC64 defines .TOC. rather than _GLOBAL_OFFSET_TABLE_, and
what's more, doesn't define it at all unless referenced. For ELFv1
ABI the symbol isn't normally referenced, so modify the test to accept
.TOC. as a variant of _GLOBAL_OFFSET_TABLE_ and 0 or 1 occurrences.
copy_test_relro as written doesn't need copy relocs on PowerPC64.
PowerPC64 is always PIC. So, modify copy_test_relro to test that the
existing vars are in fact read-only directly by deliberately causing a
sigsegv, and add another couple of vars that do cause copy relocs even
when PIC.
* testsuite/ver_test_8.sh: Accept .TOC. in lieu of
_GLOBAL_OFFSET_TABLE_. Allow zero count.
* testsuite/copy_test_relro_1.cc (c, q): New vars.
* testsuite/copy_test_relro.cc: Rewrite to test read-only
status of variables directly. Reference new vars in
read-only data.
gold/
PR ld/20995
* copy-relocs.cc (Copy_relocs::make_copy_reloc): Use .dynbss for
read-only data when linking with -z relro.
* copy-relocs.h (Copy_relocs::dynrelro_): New data member.
* testsuite/Makefile.am (copy_test_relro): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/copy_test_relro.cc: New source file.
* testsuite/copy_test_relro_1.cc: New source file.
gold/
PR gold/17643
* options.h (-z bndplt): New option.
* x86_64.cc (Output_data_plt_x86_64::regular_count): New method.
(Output_data_plt_x86_64::address_for_global): Move implementation into
virtual method.
(Output_data_plt_x86_64::address_for_local): Likewise.
(Output_data_plt_x86_64::got): New method.
(Output_data_plt_x86_64::got_plt): New method.
(Output_data_plt_x86_64::got_irelative): New method.
(Output_data_plt_x86_64::do_address_for_global): New virtual method.
(Output_data_plt_x86_64::do_address_for_local): New virtual method.
(class Output_data_plt_x86_64_bnd): New class.
(Target_x86_64::do_make_data_plt): Move out of line and specialize
for each size (both overloads).
(Output_data_plt_x86_64::set_final_data_size): Cosmetic changes.
* testsuite/Makefile.am (bnd_plt_1): New test case.
(bnd_ifunc_1): New test case.
(bnd_ifunc_2): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/bnd_ifunc_1.s: New source file.
* testsuite/bnd_ifunc_1.sh: New shell script.
* testsuite/bnd_ifunc_2.s: New source file.
* testsuite/bnd_ifunc_2.sh: New shell script.
* testsuite/bnd_plt_1.s: New source file.
* testsuite/bnd_plt_1.sh: New shell script.
Gold was not placing forced-local symbols (e.g., hidden visibility)
at the front of the dynamic symbol table, or including them in the
count of local symbols recorded in the .dynsym section's sh_info field.
gold/
* layout.cc (Layout::finalize): Track count of forced-local symbols
in .dynsym.
(Layout::create_symtab_sections): Add local_dynamic_count parameter;
use that instead of sh_info value.
(Layout::create_dynamic_symtab): Add pforced_local_dynamic_count
parameter; pass it to Symtab::set_dynsym_indexes(). Include forced
locals in sh_info value. Pass index of first real global to
Dynobj::create_gnu_hash_table() and Dynobj::create_elf_hash_table().
* layout.h (Layout::create_symtab_sections): Add local_dynamic_count
parameter.
(Layout::create_dynamic_symtab): Add pforced_local_dynamic_count
parameter.
* symtab.cc (Symbol_table::set_dynsym_indexes): Add pforced_local_count
parameter. Process forced-local symbols first and return the count.
(Symbol_table::finalize): Update comments.
* symtab.h (Symbol_table::set_dynsym_indexes): Add pforced_local_count
parameter.
(Symbol_table::first_dynamic_global_index_): Update comment.
(Symbol_table::dynamic_count_): Update comment.
* testsuite/Makefile.am (ifuncmod1.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ifuncmod1.sh: New shell script.
When creating a predefined hidden symbol like _GLOBAL_OFFSET_TABLE_, gold
was incorrectly letting a version script add a version to the symbol,
resulting in two copies of the symbol, both STB_LOCAL, but one of which
was grouped in the globals part of the symbol table.
gold/
* symtab.cc (Symbol_table::define_special_symbol): Add is_forced_local
parameter; if set, do not check version script.
(Symbol_table::do_define_in_output_data): Pass is_forced_local for
STB_LOCAL predefined symbols.
(Symbol_table::do_define_in_output_segment): Likewise.
(Symbol_table::do_define_in_output_segment): Likewise.
(Symbol_table::do_define_as_constant): Likewise.
* symtab.h (Symbol_table::define_special_symbol): Add is_forced_local
parameter. Adjust all callers.
* testsuite/Makefile.am (ver_test_8.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* ver_test_8.sh: New test script.
Egeyar Bagcioglu
Alan Modra
Cary Coutant
Simon Marchi
Roland McGrath
Sriraman Tallam
Stephen Crane
Benjamin Peterson
H.J. Lu
James Clarke
Umesh Kalappa
Teresa Johnson
Igor Kudrin
Rahul Chaudhry