2ec9323810
2008-04-17 Marc Khouzam <marc.khouzam@ericsson.com>
...
* breakpoint.c (update_watchpoint): Always reparse
condition.
2008-04-18 00:41:28 +00:00
e9bbd7c5e4
* breakpoint.c (print_one_breakpoint_location): Make sure to print
...
the breakpoint address only once.
2008-04-17 22:43:17 +00:00
2cec12e55b
PR gdb/2424
...
* infrun.c (normal_stop) Move breakpoint_auto_delete further down
to allow printing to 'see' real reason of stop. This fixes PR 2424.
* breakpoint.c (bpdisp_texst): New function. The function takes over
the role of bpstats static array in print_one_breakpoint_location.
(print_it_typical): Print "Temporary breakpoint" instead
of just "Breakpoint" when breakpoint is, well, temporary. For mi-like
protocols, print disp field.
(print_one_breakpoint_location): Removed bpdisps static definition.
Call new bpstat_text function to get value for 'disp' field.
(mention): Print "Temporary breakpoint" instead of just "Breakpoint".
2008-04-15 14:32:12 +00:00
32c1e744c1
Async mode fixes.
...
* Makefile.in (infcmd.o, inf-loop.o): Update dependencies.
* breakpoint.c (bpstat_do_actions): In async mode,
don't jump to top expecting stop_bpstat to be already
updated.
* event-loop.c (start_event_loop): Call async_enable_stdin
on exception.
* event-top.c (async_enable_stdin): Do nothing if sync_execution
is not set.
(command_handler): Do not setup continuation here.
(command_line_handler_continuation): Move to...
* top.c (command_line_handler_continuation): ... here.
(execute_command): In async mode, register continuation.
Don't check frame's language in running in async mode.
* exceptions.c (throw_exception): Don't do exec_error_cleanups.
* inf-loop.c (complete_execution): Inline into...
(inferior_event_handler): ... here. Clear target_executing before
doing any cleanups. Don't try to show prompt if the target was
resumed.
* infcmd.c (signal_command): Add support for async mode.
(finish_command): Only add continuation if the target was
successfully resumed.
* remote.c (init_async_opts): Register to_get_thread_local_address
handler.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Don't mess
with sync_execution.
* tui/tui-interp.c (tui_command_loop): Call async_enable_stdin
on exception.
2008-03-14 18:57:44 +00:00
8defab1af7
* breakpoint.h (breakpoint_restore_shadows): New
...
declaration.
* breakpoint.c (breakpoint_restore_shadows): New.
(read_memory_nobpt): Delete.
* gdbcore.h (read_memory_nobpt): Delete declaration.
* target.c (memory_xfer_partial): Call
breakpoint_restore_shadows.
(restore_show_memory_breakpoints)
(make_show_memory_beakpoints_cleanup): New.
(show_memory_breakpoints): New.
* target.h (make_show_memory_beakpoints_cleanup): Declare.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint):
Make sure we see memory breakpoints when checking if
breakpoint is still there.
* alpha-tdep.c, alphanbsd-tdep.c, frame.c, frv-tdep.c,
hppa-linux-tdep.c, hppa-tdep.c, i386-linux-nat.c, i386-tdep.c,
m68klinux-tdep.c, mips-tdep.c, mn10300-tdep.c, s390-tdep.c,
sparc-tdep.c: Use target_read_memory instead of read_memory_nobpt.
2008-03-13 12:22:14 +00:00
fa4727a64f
* breakpoint.c (fetch_watchpoint_value): New function.
...
(update_watchpoint): Set and clear val_valid. Use
fetch_watchpoint_value. Handle unreadable values on the
value chain. Correct check for user-requested array watchpoints.
(breakpoint_init_inferior): Clear val_valid.
(watchpoint_value_print): New function.
(print_it_typical): Use it. Do not free or clear old_val. Print
watchpoints even if old_val == NULL.
(watchpoint_check): Use fetch_watchpoint_value. Check for values
becoming readable or unreadable.
(watch_command_1): Use fetch_watchpoint_value. Set val_valid.
(do_enable_watchpoint): Likewise.
* breakpoint.h (struct breakpoint): Update comment for val. Add
val_valid.
* NEWS: Mention watchpoints on inaccessible memory.
* gdb.base/watchpoint.c (global_ptr, func4): New.
(main): Call func4.
* gdb.base/watchpoint.exp: Call test_inaccessible_watchpoint.
(test_inaccessible_watchpoint): New.
* gdb.texinfo (Set Watchpoints): Mention watchpoints on
unreadable memory. Delete obsolete SPARClite reference.
2008-03-03 13:24:12 +00:00
6a048695b3
* breakpoint.c (skip_prologue_sal): New function.
...
(resolve_sal_pc): Adjust SAL past prologue if the SAL was
computed from a line number.
2008-02-27 20:27:49 +00:00
54e52265e2
* breakpoint.c (print_one_breakpoint_location): Revert Enb field
...
to old format. Discard breakpoint address if shared library is
unloaded.
(breakpoint_1): Adjust formatting of table header accordingly.
2008-02-26 08:14:11 +00:00
776592bf17
* breakpoint.c: #include "hashtab.h".
...
(ambiguous_names_p): New fn.
(update_breakpoint_locations): When restoring bp enable status, don't
compare function names if any functions have same name.
* Makefile.in (breakpoint.o): Add hashtab.h dependency.
* gdb.cp/mb-inline.exp: New.
* gdb.cp/mb-inline.h: New.
* gdb.cp/mb-inline1.cc: New.
* gdb.cp/mb-inline2.cc: New.
2008-02-08 00:42:07 +00:00
98deb0daae
* breakpoint.c (break_command_1): Return void.
...
(break_command_really): Return void. Rethrow
exceptions instead of returning.
(gdb_breakpoint): Remove the error_message parameter.
Return void. Rename to set_breakpoint.
* gdb.h (gdb_breakpoint): Rename and move to...
* breakpoint.h (set_breakpoint): ...here.
* mi/mi-cmb-break.c (mi_cmd_break_insert): Restore
event hooks even if exception is thrown. Adjust to
gdb_breakpoint interface changes.
2008-02-01 16:24:47 +00:00
723a227560
Properly rethrow exception. This fixes errors
...
about non-existent functions for -break-insert.
* breakpoint.c (break_command_really): Use throw_exception
for rethrowing. If rethrowing, don't print the exception.
2008-02-01 06:47:20 +00:00
a5606eee5e
Use multiple locations for hardware watchpoints.
...
This eliminates the need to traverse value chain, doing
various checks, in three different places.
* breakpoint.h (struct bp_location): New fields
lengths and watchpoint_type.
(struct breakpoint): Remove the val_chain field.
* breakpoint.c (is_hardware_watchpoint): New.
(free_valchain): Remove.
(update_watchpoint): New.
(insert_bp_location): For hardware watchpoint, just
directly insert it.
(insert_breakpoints): Call update_watchpoint_locations
on all watchpoints. If we have failed to insert
any location of a hardware watchpoint, remove all inserted
locations.
(remove_breakpoint): For hardware watchpoints, directly
remove location.
(watchpoints_triggered): Iterate over locations.
(bpstat_stop_status): Use only first location of
a resource watchpoint.
(delete_breakpoint): Don't call free_valchain.
(print_one_breakpoint): Don't print all
locations for watchpoints.
(breakpoint_re_set_one): Use update_watchpoint for
watchpoints.
2008-01-29 17:52:47 +00:00
0b3de036ef
Don't reset watchpoint block on solib load.
...
* breakpoint.c (insert_bp_location): For watchpoints,
recompute condition.
(breakpoint_re_set_one): Instead of recomputing value
and condition for watchpoints, just reset value and
let insert_breakpoints/insert_bp_location recompute it.
Don't do anything about disabled watchpoint.
2008-01-29 16:47:47 +00:00
60c4664782
* breakpoint.c (break_command_really): New parameter
...
ignore_count.
(break_command_1): Pass 0 as
ignore_count to break_command_really.
(gdb_breakpoint): Pass ignore_count to
break_command_really.
2008-01-22 19:43:10 +00:00
ed49a04fe1
* exec.c: #include "arch-utils.h"
...
(print_section_info): Use gdbarch_from_bfd to get at the
current architecture. Replace current_gdbarch. Fix indention.
Replace deprecated_print_address_numeric by paddress.
* Makefile.in (exec.o) Add dependency to arch-utils.h.
* valprint.c (val_print_string): Replace
deprecated_print_address_numeric.
* tracepoint.c (trace_mention, scope_info): Likewise.
* symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol)
(print_symbol, print_partial_symbols, maintenance_info_psymtabs)
(maintenance_check_symtabs): Likewise.
* symfile.c (list_overlays_command): Likewise.
* stack.c (frame_info, print_block_frame_labels): Likewise.
* printcmd.c (print_address, print_address_demangle)
(address_info): Likewise.
* corefile.c (memory_error): Likewise.
* infcmd.c (jump_command): Likewise.
* breakpoint.c (insert_bp_location, describe_other_breakpoints)
(mention, delete_breakpoint): Likewise.
* c-valprint.c (print_function_pointer_address, c_val_print): Likewise.
* dwarf2read.c (dump_die): Likewise.
* ada-valprint.c (ada_val_print_1): Likewise.
* f-valprint.c (f_val_print): Likewise.
* linux-fork.c (info_forks_command): Likewise.
* m32r-com.c (m32r_load_section, m32r_load)
(m32r_upload_command): Likewise.
* ui-out.c (ui_out_field_core_addr): Remove unnecessary comment.
2008-01-11 13:34:15 +00:00
9b254dd1ce
Updated copyright notices for most files.
2008-01-01 22:53:26 +00:00
37e4754d76
* breakpoint.c: (watch_command_1): Parse additional optional
...
"thread" parameter to the watchpoint command and set the
"thread" member of the breakpoint struct.
* doc/gdb.texinfo: Add new parameter's description.
* testsuite/gdb.base/watch_thread_num.c: New testcase source file.
* testsuite/gdb.base/watch_thread_num.exp: New testcase expect file.
2007-12-17 12:32:23 +00:00
28e78778f5
* breakpoint.c (bpstat_stop_status): Check an additional
...
condition before evaluating an expression value.
2007-12-17 11:34:45 +00:00
b5447a83ac
* breakpoint.c (bpstat_have_active_hw_watchpoints):
...
Remove
(bpstat_stop_status): Remove unused variable
real_breakpoint.
* breakpoint.h (bpstat_have_active_hw_watchpoints):
Remove prototype.
2007-12-16 19:15:48 +00:00
afe8ab2206
Add support for pending breakpoints in MI.
...
* gdb.h (gdb_breakpoint): Add parameter pending.
* breakpoint.c (gdb_breakpoint): Add parameter pending.
* mi/mi-cmd-break.c (mi_break_insert): Change
comment to refer to manual. Add support for
the -f flag, for pending breakpoint.
2007-12-14 18:15:47 +00:00
72b2ff0e02
* breakpoint.c (break_command_really): New, copied
...
from break_command_1. New parameters COND_STRING, THREAD
PARSE_CONDITITION_AND_THREAD and PENDING_BREAK_SUPPORT.
The previous FLAG parameter split into TEMPFLAG and
HARDWAREFLAG.
When PARSE_CONDITION_AND_THREAD is not set, duplicate
the passed condition string.
(struct captured_breakpoint_args): Remove
(do_captured_breakpoint): Remove.
(break_command_1): Relay to break_command_really.
(gdb_breakpoint): Relay to break_command_really.
2007-12-14 17:54:48 +00:00
dfdfb3ca98
Remove unused support for target-based exception catching.
...
* target.h (struct target_ops): Delete
to_enable_exception_callback and to_get_current_exception_event
members.
(target_enable_exception_callback)
(target_get_current_exception_event): Delete macros.
* target.c (update_current_target): Remove code to inherit and
default those members.
(debug_to_enable_exception_callback)
(debug_to_get_current_exception_event): Delete functions.
(setup_target_debug): Don't install those methods.
* inf-child.c (inf_child_enable_exception_callback)
(inf_child_get_current_exception_event): Delete dummy functions.
(inf_child_target): Don't install them in the target vector.
* breakpoint.h (enum bptype): Delete bp_catch_catch,
bp_catch_throw.
* breakpoint.c (cover_target_enable_exception_callback)
(ep_is_exception_catchpoint, create_exception_catchpoint): Delete
functions.
(insert_bp_location, update_breakpoints_after_exec)
(remove_breakpoint, ep_is_catchpoint, print_it_typical)
(bpstat_stop_status, bpstat_what)
(bpstat_get_triggered_catchpoints, print_one_breakpoint_location)
(user_settable_breakpoint, allocate_bp_location)
(disable_watchpoints_before_interactive_call_start)
(enable_watchpoints_after_interactive_call_stop, mention)
(delete_breakpoint, breakpoint_re_set_one, disable_command)
(enable_command): Remove exception catchpoint cases.
(catch_exception_command_1): Don't try target-based exception
handling.
* stack.c (catch_info): Call print_frame_label_vars
unconditionally.
2007-12-13 02:00:09 +00:00
801e3a5b56
Support lexical blocks and function bodies that occupy
...
non-contiguous address ranges.
* addrmap.c, addrmap.h: New files.
* block.h (struct addrmap): New forward declaration.
(struct blockvector): New member, 'map'.
(BLOCKVECTOR_MAP): New accessor macro.
* block.c: #include "addrmap.h"
(blockvector_for_pc_sect): If the blockvector we've found has
an address map, use it instead of searching the blocks.
* buildsym.c: #include "addrmap.h"
(pending_addrmap_obstack, pending_addrmap_interesting): New static
variables.
(really_free_pendings): If we have a pending addrmap, free it too.
(record_block_range): New function.
(make_blockvector): If we have an interesting pending addrmap,
record it in the new blockvector.
(start_symtab, buildsym_init): Assert that there is no pending
addrmap now; we should have cleaned up any addrmaps we'd built
previously.
(end_symtab): If there is a pending addrmap left over that didn't
get included in the blockvector, free it.
* buildsym.h (struct addrmap): New forward declaration.
(record_block_range): New prototype.
* objfiles.c: #include "addrmap.h".
(objfile_relocate): Relocate the blockvector's address map, if
present.
* dwarf2read.c (dwarf2_record_block_ranges): New function.
(read_func_scope, read_lexical_block_scope): Call it.
* Makefile.in (SFILES): Add addrmap.c.
(addrmap_h): New header dependency variable.
(COMMON_OBS): Add addrmap.o.
(addrmap.o): New rule.l
(block.o, objfiles.o, buildsym.o): Depend on $(addrmap_h).
* block.c (blockvector_for_pc, blockvector_for_pc_sect): Return a
pointer to the block, not its index in the blockvector.
(block_for_pc_sect): Use the returned block, instead of looking it
up ourselves.
* block.h (blockvector_for_pc, blockvector_for_pc_sect): Update
declarations.
* breakpoint.c (resolve_sal_pc): Use returned block, instead of
looking it up ourselves.
* stack.c (print_frame_label_vars): Disable function, which
depends on the block's index.
* buildsym.c (finish_block): Return the block we've built.
* buildsym.h (finish_block): Update prototype.
* defs.h (CORE_ADDR_MAX): New constant.
2007-12-04 23:43:57 +00:00
e236ba4424
Make insert_breakpoints return void.
...
* breakpoint.h (insert_breakpoints): Change
return type to void.
* breakpoint.c (insert_breakpoints): Change
return type to void. Rename local return_val
variable to error.
* infrun.c (keep_going): Instead of checking
return value from insert_breakpoints, catch exception.
2007-11-30 10:00:26 +00:00
c36b740af1
Stop infrun from tracking breakpoint insertion status.
...
The checks of breakpoints_inserted before calling
remove_breakpoints are removed, as remove_breakpoint
won't touch uninserted breakpoints. In a number of places,
we're interested if a breakpoint is inserted at particular
PC, and we now use breakpoint_inserted_here_p. In a few
places, insert_breakpoints can be called unconditionally,
since it won't try to insert already inserted breakpoint.
* breakpoint.h (regular_breakpoint_inserted_here_p): New
declaration.
* breakpoint.c (regular_breakpoint_inserted_here_p): New.
(breakpoint_inserted_here_p): Use
regular_breakpoint_inserted_here_p.
* infrun.c (breakpoints_inserted): Remove.
(resume): Don't check for breakpoints_inserted before
remove_hw_watchpoints. Use breakpoint_inserted_here_p.
(proceed, init_wait_for_inferior): Don't set breakpoints_inserted.
(handle_inferior_event): Don't use breakpoints_inserted.
Use breakpoints_meant_to_be_inserted and
breakpoints_inserted_here_p.
(insert_step_resume_breakpoint_at_sal, keep_going): Use
breakpoints_meant_to_be_inserted. Don't set breakpoints_inserted.
(normal_stop): Don't check for breakpoints_inserted. Don't
set breakpoints_inserted.
(keep_going): Don't check for breakpoints_inserted.
(insert_step_resume_breakpoint_at_sal): Don't insert
breakpoints
2007-11-29 07:48:21 +00:00
35a487f186
* breakpoint.c (watch_command_1): When the watchpoint isn't local
...
to any frame, initialize watchpoint_frame using null_frame_id, not
a memset.
2007-11-28 18:21:30 +00:00
a0cf7492a3
* breakpoint.c (insert_breakpoints)
...
(insert_bp_location): Remove stale comments.
2007-11-23 16:54:34 +00:00
568fff39de
Remove unused breakpoint fields.
...
* breakpoint.h (struct breakpoint): Remove
from_tty and flag fields.
* breakpoint.c (break_command_1): Don't set
from_tty and flag field set of breakpoint.
(create_ada_exception_breakpoint): Don't set
the from_tty field.
2007-11-20 17:37:35 +00:00
7514952146
* breakpoint.c (disable_breakpoints_in_unloaded_shlib):
...
Make static.
2007-11-20 08:16:15 +00:00
89f9893c7d
Apply const qualifier to some users of bp_location.
...
* breakpoint.h (struct bpstats): Make
the breakpoint_at field point at const bp_location.
* breakpoint.c (bpstat_alloc): Accept const
bp_location.
(breakpoint_here_p, breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p)
(breakpoint_thread_match, bpstat_stop_status)
(read_memory_nobpt, bpstat_have_active_hw_watchpoints): Use
const bp_location for iteration.
(print_it_typical, print_bp_stop_message): Use
const bp_location variable.
2007-11-15 06:52:53 +00:00
55a3f01f6f
Make mark_breakpoints_out static.
...
* breakpoint.h (mark_breakpoints_out): Remove
declaration.
* breakpoint.c (mark_breakpoints_out): Make static.
2007-11-15 06:46:21 +00:00
d6e956e5c2
Prevent clear_command from directly modifying breakpoint list.
...
* Makefile.in (breakpoint_h): Update dependency.
* breakpoint.c (clear_command): Do not remove
breakpoints from breakpoint_chain. Collect breakpoints
to delete in a vector.
* breakpoint.h (breakpoint_p): New typedef for pointer to
breakpoint. Register vector of breakpoint_p.
2007-11-15 06:28:19 +00:00
db107f19ec
* breakpoint.c (break_command_1): Remove
...
pending_bp parameter.
(create_breakpoint): Likewise.
(create_breakpoints): Likewise. Adjust call to
create_breakpoint.
(break_command_1): Likewise. Adjust call to
create_breakpoints.
(do_captured_breakpoint): Adjust call to
create_breakpoints.
(break_command, tbreak_command, hbreak_command)
(stopin_command, stopat_command): Adjust call
to break_command_1.
2007-11-08 16:43:39 +00:00
c40e75cd6e
* breakpoint.c (set_raw_breakpoint_without_location): Make static.
2007-11-05 18:24:29 +00:00
9b70b9936e
* breakpoint.h (create_solib_load_event_breakpoint)
...
(create_solib_unload_event_breakpoint)
(create_fork_event_catchpoint, create_vfork_event_catchpoint)
(create_exec_event_catchpoint): Delete declaration.
* breakpoint.c (create_solib_load_event_breakpoint)
(solib_load_unload_1, create_solib_unload_event_breakpoint): Delete.
(create_fork_event_catchpoint, create_vfork_event_catchpoint)
(create_exec_event_catchpoint): Make static.
2007-11-05 18:18:47 +00:00
60b0bfbcb3
* breakpoint.h (set_breakpoint_sal): Remove declaration.
...
* breakpoint.c (set_breakpoint_sal): Delete.
2007-11-05 18:09:18 +00:00
ee53e8729a
* breakpoint.c (breakpoint_sals_to_pc): Do not check for
...
DEPRECATED_PC_REQUIRES_RUN_BEFORE_USE.
* config/pa/tm-hppa.h: Delete file.
* config/pa/hppa64.mt: Do not set DEPRECATED_TM_FILE.
* config/pa/hppahpux.mt: Likewise.
* config/pa/hppa.mt: Likewise.
* config/pa/linux.mt: Likewise.
* hppa-tdep.c (hppa_pc_requires_run_before_use): Delete.
2007-10-12 16:11:12 +00:00
b4c291bb6d
* breakpoint.c (do_enable_breakpoint): Delay enabling until after
...
checking watchpoint resources.
2007-10-11 20:19:37 +00:00
0c6773c14a
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
...
* breakpoint.c (print_one_breakpoint_location): ARI fix:
Replace asprintf by xstrprintf.
2007-10-08 15:23:42 +00:00
d983da9c3d
2007-09-16 Daniel Jacobowitz <dan@codesourcery.com>
...
Jeff Johnston <jjohnstn@redhat.com>
* breakpoint.c (watchpoints_triggered): New.
(bpstat_stop_status): Remove STOPPED_BY_WATCHPOINT argument.
Check watchpoint_triggered instead. Combine handling for software
and hardware watchpoints. Do not use target_stopped_data_address
here. Always check a watchpoint if its scope breakpoint triggers.
Do not stop for thread or overlay events. Improve check for
triggered watchpoints without a value change.
(watch_command_1): Insert the scope breakpoint first. Link the
scope breakpoint to the watchpoint.
* breakpoint.h (enum watchpoint_triggered): New.
(struct breakpoint): Add watchpoint_triggered.
(bpstat_stop_status): Update prototype.
(watchpoints_triggered): Declare.
* infrun.c (enum infwait_status): Add infwait_step_watch_state.
(stepped_after_stopped_by_watchpoint): Delete.
(handle_inferior_event): Make stepped_after_stopped_by_watchpoint
local. Handle infwait_step_watch_state. Update calls to
bpstat_stop_status. Use watchpoints_triggered to check
watchpoints.
* remote.c (stepped_after_stopped_by_watchpoint): Remove extern.
(remote_stopped_data_address): Do not check it.
* gdb.texinfo (Setting Watchpoints): Adjust warning text about
multi-threaded watchpoints.
* gdbint.texinfo (Watchpoints): Describe how watchpoints are
checked. Describe sticky notification. Expand description
of steppable and continuable watchpoints.
(Watchpoints and Threads): New subsection.
* gdb.threads/watchthreads.c (thread_function): Sleep between
iterations.
* gdb.threads/watchthreads.exp: Allow two watchpoints to trigger
at once for S/390. Generate matching fails and passes.
2007-10-01 00:17:58 +00:00
d32a698258
* breakpoint.c (create_breakpoint): Set
...
condition on each location, not on the first
location of breakpoint.
2007-09-26 18:44:55 +00:00
ed0616c6b7
* breakpoint.c (remove_sal): New.
...
(expand_line_sal_maybe): New.
(create_breakpoints): Call expand_line_sal_maybe.
(clear_command): Add comment.
(breakpoint_re_set_one): Call expand_line_sal_maybe.
* linespec.c (decode_indirect): Set explicit_pc to 1.
(decode_all_digits): Set explicit_line to 1.
(append_expanded_sal): New.
(expand_line_sal): New.
* linespec.h (expand_line_sal): Declare.
* symtab.c (init_sal): Initialize explicit_pc
and explicit_line.
* symtab.h (struct symtab_and_line): New fields
explicit_pc and explicit_line.
2007-09-24 07:40:32 +00:00
0d381245e3
* breakpoint.h (enum enable_state): Remove the
...
bp_shlib_disabled enumerator.
(struct bp_location): New members shlib_disabled,
global_next, enabled and function_name.
Rename pending to condition_not_parsed.
* breakpoint.c (ALL_BP_LOCATIONS): Iterate over global_next.
(ALL_BP_LOCATIONS_SAFE): Likewise.
(breakpoint_enabled): Don't check for pending.
(condition_command): Free and update all locations of
a breakpoint.
(insert_bp_location): Adjust.
(software_breakpoint_inserted_here_p): Don't care
if breakpoint is enabled, as soon as it's inserted.
(print_it_typical): Print bpstat's location, not
bpstat's breakpoint's location.
(bpstat_stop_status): Iterate over all locations, not
all breakpoints.
(print_breakpoint_location): New.
(print_one_breakpoint): Renamed to
(print_one_breakpoint_location): ...this. Take
parameters to describe which location is being
printed. Modify code to properly print header
for several locations and individual locations.
(print_one_breakpoint): Print all locations.
(breakpoint_has_pc): New.
(describe_other_breakpoints): Use the above.
(check_duplicates): Renamed to...
(check_duplicates_for): .. this.
(check_duplicates): Use check_duplicates_for.
(allocate_bp_location): Adjust.
(set_raw_breakpoint_without_location): New,
extracted from set_raw_breakpoint.
(set_breakpoint_location_function): New.
(set_raw_breakpoint): Use
set_raw_breakpoint_without_location.
(make_breakpoint_permanent): Mark all locations
as inserted.
(disable_breakpoints_in_shlibs): Iterate over
locations.
(disable_breakpoints_in_unloaded_shlib): Likewise.
(re_enable_breakpoints_in_shlibs): Likewise.
(mention): Say "pending" when breakpoint has
zero locations. If breakpoint has more than one
location, say so.
(add_location_to_breakpoint): New.
(create_breakpoint): Accept symtabs_and_lines, not
symtab_and_line. Pass extra sals to
add_location_to_breakpoint.
(create_breakpoints): Pass symtabs_and_lines to
create_breakpoints.
(break_command_1): Make pending breakpoints
have zero locations.
(do_captured_breakpoint): Remove wrong allocation.
(clear_command): Iterate over all locations.
(unlink_locations_from_global_list): Renamed
from unlink_location_from_global_list. Remove
all locations.
(delete_breakpoint): Remove all locations.
Iterate over all locations when deciding which
other location to re-enable.
(all_locations_are_pending): New.
(update_breakpoint_locations): Renamed from
update_breakpoint_location. Try to match old
and new locations using names of containing
functions.
(breakpoint_re_set_one): Adjust.
(find_location_by_number): New.
(disable_command): Allow disabling individual location.
(enable_command): Allow enabling individual location.
* breakpoint.c: Adjust all uses of breakpoint's
enable state to for bp_shlib_disabled change.
2007-09-23 07:56:22 +00:00
fe3f5fa8f9
* breakpoint.c (do_restore_lang_radix_cleanup): Remove.
...
(resolve_pending_breakpoint): Remove.
(re_enable_breakpoints_in_shlibs): Remove.
(unlink_locations_from_global_list): New.
(update_breakpoint_locations): New.
(breakpoint_re_set_one): Don't bail out on pending breakpoints.
Use parse_condition and update_breakpoint_location to
reset breakpoint. Ignore 'symbol not found' error from
decode_line_1.
(breakpoint_re_set): Don't emit newline before the
reason why breakpoint is not reset.
(do_enable_breakpoint): Don't specially process pending
breakpoints.
(free_bp_location): New.
(break_command_1): For pending breakpoints, initialize
all fields of a sal with zeroes.
* breakpoint.h (re_enable_breakpoints_in_shlibs): Remove.
* infcmd.c (post_create_inferior): Don't call
re_enable_breakpoints_in_shlibs.
* infrun.c (handle_inferior_event): Likewise.
* solib-irix.c (irix_solib_create_inferior_hook): Likewise.
* solib-osf.c (osf_solib_create_inferior_hook): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
2007-09-22 19:33:32 +00:00
018d34a46b
* breakpoint.c (create_breakpoint): Split from
...
create_breakpoints, implementing most of its logic.
Take just a single sal, single address string and
single condition. Do not take parsed condition at
all.
(create_breakpoints): Just call create_breakpoint
for each sal.
(find_condition_and_thread): New.
(break_command_1): Use find_condition_and_thread.
Do not keep parsed conditions.
(do_captured_breakpoint): Don't convert
condition string to struct expression.
2007-09-22 19:10:05 +00:00
511a6cd4e1
gdb/
...
* breakpoint.h (struct breakpoint): Move the cond
field to...
(struct bp_location): Here.
* breakpoint.c (condition_command, bpstat_stop_status)
(print_one_breakpoint, allocate_bp_location)
(solib_load_unload_1, create_fork_vfork_event_catchpoint)
(create_exec_event_catchpoint, create_breakpoints)
(break_command_1, watch_command_1, handle_gnu_v3_exceptions)
(create_ada_exception_breakpoint, set_breakpoint_sal)
(delete_breakpoint, breakpoint_re_set_one): Adjust.
* tui/tui-winsource.c (tui_update_breakpoint_info): Adjust.
2007-09-22 19:06:59 +00:00
4f8d1dc6a5
Associate bp_stat with bp_location, not breakpoint.
...
* breakpoint.h (breakpoint_at): Change type
to bp_location*.
* breakpoint.c (bpstat_alloc): Take bp_location,
not breakpoint.
(bpstat_find_breakpoint): Look at bpstat's location's
owner, not at bpstat->breakpoint_at.
(bpstat_find_step_resume_breakpoint): Likewise.
(bpstat_num): Likewise.
(print_it_typical): Likewise.
(print_bp_stop_message): Likewise.
(watchpoint_check): Likewise.
(bpstat_what): Likewise.
(bpstat_get_triggered_catchpoints): Likewise.
(breakpoint_auto_delete): Likewise.
(delete_breakpoint): Likewise.
(bpstat_stop_status): Pass location, not breakpoint,
to bpstat_alloc. Look at bpstat's location's
owner, not at bpstat->breakpoint_at.
2007-09-22 17:49:41 +00:00
fe5aea2e5f
* breakpoint.c (watch_command_1): Remove '#ifdef HPUXHPPA' block;
...
this code has not been compiled for two years.
2007-08-29 22:07:47 +00:00
a9762ec78a
Switch the license of all .c files to GPLv3.
...
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
2007-08-23 18:08:50 +00:00
198757a8b1
* breakpoint.c (bpstat_free): New.
...
(bpstat_clear): Use bpstat_free.
(delete_breakpoint): Document why we cannot
remove bpstats from stop_bpstat.
* breakpoint.h (bpstat_free): Declare.
2007-08-17 17:06:04 +00:00
cb85195420
gdb/
...
* breakpoint.c (disable_breakpoints_in_shlibs): Remove
the 'silent' parameter and code to implement that.
* breakpoint.h (disable_breakpoints_in_shlibs): Adjust
prototype.
* win32-nat.c: Adjust.
* solib.c: Adjust.
2007-08-14 11:09:45 +00:00
e14a792bcf
gdb/
...
* breakpoint.c (update_breakpoints_after_exec): Don't
set address to zero.
2007-08-14 08:11:45 +00:00
c1f5197edc
2007-08-04 Michael Snyder <msnyder@access-company.com>
...
* breakpoint.c (print_one_breakpoint): Off by one error.
2007-08-05 00:43:34 +00:00
967af18d0d
2007-07-31 Michael Snyder <msnyder@access-company.com>
...
* breakpoint.c (breakpoint_init_inferior): Add 'else' to 'if'.
True and false paths are mutually exclusive.
2007-07-31 23:08:22 +00:00
d1aa2f5076
Include "top.h".
...
(breakpoint_1): Don't set convenience variable $_ if server prefix
is used.
(_initialize_breakpoint): Describe this behaviour in command help.
2007-07-10 22:59:42 +00:00
9bbf65bb08
2007-07-02 Markus Deuling <deuling@de.ibm.com>
...
* breakpoint.c (insert_bp_location): Remove dead code
(DISABLE_UNSETTABLE_BREAK).
(disable_breakpoints_in_shlibs)
(disable_breakpoints_in_unloaded_shlib): Likewise (comment).
2007-07-02 18:30:19 +00:00
a4954f26af
* breakpoint.c (reattach_breakpoints): Do not use remove_breakpoint.
...
Call insert_bp_location.
2007-07-02 16:14:01 +00:00
17a912b682
2007-06-13 Markus Deuling <deuling@de.ibm.com>
...
* gdbarch.sh (TARGET_ADDR_BIT): Replace by gdbarch_addr_bit.
* valops.c (value_cast): Likewise.
* utils.c (strlen_paddr, paddr, paddr_nz, paddress): Likewise.
* ui-out.c (ui_out_field_core_addr): Likewise.
* tracepoint.c (tracepoints_info): Likewise.
* symtab.c (print_msymbol_info): Likewise.
* solib-irix.c (irix_current_sos)
(irix_open_symbol_file_object): Likewise.
* remote.c (build_remote_gdbarch_data): Likewise.
* prologue-value.c (make_pv_area): Likewise.
* procfs.c (info_mappings_callback): Likewise.
* printcmd.c (print_scalar_formatted)
(deprecated_print_address_numeric): Likewise.
* memattr.c (mem_info_command): Likewise.
* linux-nat.c (linux_nat_info_proc_cmd): Likewise.
* gdbtypes.c (build_flt, gdbtypes_post_init): Likewise.
* exec.c (print_section_info): Likewise.
* dwarf2read.c (read_subrange_type): Likewise.
* dwarf2loc.c (find_location_expression): Likewise.
* dwarf2expr.c (dwarf2_read_address, unsigned_address_type)
(signed_address_type, execute_stack_op): Likewise.
* breakpoint.c (print_one_breakpoint, breakpoint_1): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.
2007-06-13 17:59:51 +00:00
3b3b875c48
2007-06-13 Markus Deuling <deuling@de.ibm.com>
...
* gdbarch.sh (BREAKPOINT_FROM_PC): Replace by
gdbarch_breakpoint_from_pc.
* s390-tdep.c (s390_gdbarch_init): Likewise (comment).
* remote.c (remote_insert_breakpoint)
(remote_insert_hw_breakpoint): Likewise.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
* mips-tdep.c (mips_breakpoint_from_pc): Likewise (comment).
* breakpoint.h (bp_target_info): Likewise (comment).
* breakpoint.c (read_memory_nobpt): Likewise.
* mem-break.c (default_memory_insert_breakpoint): Likewise.
(symtab.h, breakpoint.h): Remove include. Remove unnecessary comment.
* gdbarch.c, gdbarch.h: Regenerate.
2007-06-13 17:38:43 +00:00
91104499cb
* gdbarch.sh (GET_LONGJMP_TARGET): Replace by gdbarch_get_longjmp_target.
...
* infrun.c (handle_inferior_event): Likewise.
* gdbarch.sh (GET_LONGJMP_TARGET_P): Replace by
gdbarch_get_longjmp_target_p.
* breakpoint.c (breakpoint_re_set): Likewise.
* infrun.c (handle_inferior_event): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.
2007-06-06 15:15:34 +00:00
d3e9c991c8
* hppa-hpux-tdep.c (args_for_find_stub, HP_ACC_EH_notify_hook,
...
HP_ACC_EH_set_hook_value, HP_ACC_EH_notify_callback, HP_ACC_EH_break,
HP_ACC_EH_catch_throw, HP_ACC_EH_catch_catch, __eh_notification,
hp_cxx_exception_support, hp_cxx_exception_support_initialized,
eh_notify_hook_addr, eh_notify_callback_addr, eh_break_addr,
eh_catch_throw_addr, break_callback_sal, setup_d_pid_in_inferior,
find_stub_with_shl_get, cover_find_stub_with_shl_get,
initialize_hp_cxx_exception_support, child_enable_exception_callback,
current_ex_event, child_get_current_exception_event): Remove.
(hppa_hpux_inferior_created): Remove.
(hppa_hpux_init_abi): Do not install hppa_hpux_inferior_created.
* breakpoint.h (deprecated_exception_catchpoints_are_fragile): Remove.
(deprecated_exception_support_initialized): Remove.
* breakpoint.c (deprecated_exception_catchpoints_are_fragile): Remove.
(deprecated_exception_support_initialized): Remove.
(breakpoint_init_inferior): Remove handling of non-zero
deprecated_exception_catchpoints_are_fragile.
* symtab.h (deprecated_hp_som_som_object_present): Remove.
* symtab.c (deprecated_hp_som_som_object_present): Remove.
* c-typeprint.c (c_type_print_base): Remove handling of non-zero
deprecated_hp_som_som_object_present.
* eval.c (evaluate_subexp_standard): Likewise.
* valops.c (value_cast): Likewise.
* parse.c (parse_nested_classes_for_hpacc, coloncolon): Remove.
* parser-defs.h (parse_nested_classes_for_hpacc): Remove.
* c-exp.y (yylex): Do not call parse_nested_classes_for_hpacc.
2007-06-05 22:47:50 +00:00
aa67235e6e
* breakpoint.c (remove_breakpoint): Do not remove software
...
breakpoints in unmapped overlay sections.
2007-05-11 20:01:31 +00:00
1aafd4da21
* breakpoint.c (single_step_breakpoint_inserted_here_p): New function.
...
(breakpoint_inserted_here_p): Call it.
(software_breakpoint_inserted_here_p): Likewise.
2007-05-11 12:44:34 +00:00
2219d63c86
* breakpoint.c (set_raw_breakpoint): Adjust breakpoint's address
...
prior to allocating its location.
2007-05-03 17:42:25 +00:00
4d5b2cd774
* breakpoint.c (update_breakpoints_after_exec, print_it_typical)
...
(bpstat_what, print_one_breakpoint, allocate_bp_location)
(mention): Remove bp_through_sigtramp support.
* breakpoint.h (enum bptype): Remove bp_through_sigtramp.
2007-04-13 13:50:32 +00:00
46d570866d
* breakpoint.c (bpstat_what): Give step-resume higher priority than
...
shlib events.
2007-04-13 13:33:10 +00:00
b0b13bb4cc
* breakpoint.c (gdb_breakpoint_query): Really return an
...
enum gdb_rc.
(gdb_breakpoint): Likewise.
* thread.c (do_captured_list_thread_ids): Likewise.
(do_captured_thread_select): Likewise.
* mi/mi-main.c (mi_cmd_thread_select): Expect an enum gdb_rc.
(mi_cmd_thread_list_ids): Remove bogus initialization.
2007-04-10 14:53:46 +00:00
8671a17bde
* breakpoint.c (bpstat_num): Add int *num parameter.
...
* breakpoint.h (bpstat_num): Likewise.
* infcmd.c (continue_command): Adjust to new bpstat_num
interface.
(program_info): Likewise.
2007-03-27 23:01:00 +00:00
569631c6f2
* infrun.c (breakpoints_failed): Remove unnecessary variable.
...
(handle_inferior_event): Remove unnecessary braces.
* breakpoint.c (bpstat_what): Remove wrong comment.
2007-03-09 16:20:42 +00:00
206415a3ea
* frame.c (deprecated_selected_frame): Rename to...
...
(selected_frame): ...this. Make static.
(get_selected_frame, select_frame): Update.
* frame.h (deprected_select_frame): Delete.
(deprecated_safe_get_selected_frame): Update comments.
* breakpoint.c, cli/cli-cmds.c, f-valprint.c, infcmd.c, inflow.c,
infrun.c, stack.c, tui/tui-disasm.c, tui/tui-source.c,
tui/tui-winsource.c, valops.c, varobj.c, findvar.c, macroscope.c,
parse.c, regcache.h, sh64-tdep.c, tui/tui-hooks.c, tui/tui-win.c,
tui/tui.c: Replace references to deprecated_selected_frame.
2007-02-27 19:46:04 +00:00
40c03ae8b3
* cli/cli-script.c: Include breakpoint.h.
...
(build_command_line): Require arguments only for if and while commands.
(get_command_line, execute_user_command, execute_control_command):
Fix wording of warning messages.
(print_command_lines): Print breakpoint commands.
(execute_control_command): Call commands_from_control_command to
handle the `commands' command inside a body of a flow-control command.
(read_next_line): Recognize the `commands' command and build a
command line structure for it.
(recurse_read_control_structure, read_command_lines): Handle
`commands' similarly to `if' and `while'.
* breakpoint.c (get_number_trailer): Document the special meaning
of NULL as the first argument PP.
(commands_from_control_command): New function.
* breakpoint.h (commands_from_control_command): Add prototype.
* defs.h (commands_control): New enumerated value for enum
command_control_type.
2007-01-27 12:30:46 +00:00
973d738b82
2007-01-21 Markus Deuling <deuling@de.ibm.com>
...
* breakpoint.c (delete_command): Skip redundant loop iterations.
2007-01-21 17:43:12 +00:00
6aba47ca06
Copyright updates for 2007.
2007-01-09 17:59:20 +00:00
f7f9143bd3
* ada-lang.h (ada_find_printable_frame): Remove.
...
(ada_exception_catchpoint_p, ada_decode_exception_location)
(ada_decode_assert_location): Add declaration.
* ada-lang.c: Add include of annotate.h and valprint.h.
(exception_catchpoint_kind): New enum.
(function_name_from_pc, is_known_support_routine)
(ada_find_printable_frame, ada_unhandled_exception_name_addr)
(ada_exception_name_addr_1, ada_exception_name_addr)
(print_it_exception, print_one_exception, print_mention_exception)
(print_it_catch_exception, print_one_catch_exception)
(print_mention_catch_exception, catch_exception_breakpoint_ops)
(print_it_catch_exception_unhandled)
(print_one_catch_exception_unhandled)
(print_mention_catch_exception_unhandled, print_it_catch_assert)
(print_one_catch_assert, print_mention_catch_assert)
(ada_exception_catchpoint_p, error_breakpoint_runtime_sym_not_found)
(ada_get_next_arg, catch_ada_exception_command_split)
(ada_exception_sym_name, ada_exception_sym_name)
(ada_exception_breakption_ops, ada_exception_catchpoint_cond_string)
(ada_parse_catchpoint_condition, ada_exception_sal)
(ada_decode_exception_location)
(ada_decode_assert_location): New function.
(catch_exception_unhandled_breakpoint_ops): New global variable.
(catch_assert_breakpoint_ops): New global variable.
* breakpoint.c: Add include of ada-lang.h.
(print_one_breakpoint): Do not print the condition for Ada
exception catchpoints.
(create_ada_exception_breakpoint): New function.
(catch_ada_exception_command, catch_assert_command): New function.
(catch_command_1): Add support for the new "catch exception" and
"catch assert" commands.
(_initialize_breakpoint): Add help description for the new catch
commands.
* Makefile.in (ada-lang.o): Add dependency on annotate.h and
valprint.h.
(breakpoint.o): Add dependency on ada-lang.h.
2007-01-04 05:27:31 +00:00
d5d6fca504
Warning fixes.
...
* ada-lang.c (find_struct_field): Initialize *byte_offset_p.
* breakpoint.c (do_enable_breakpoint): Ignore both mem_cnt and i.
* c-typeprint.c (c_type_print_varspec_suffix): Don't test length
greater than or equal to zero.
* m2-typeprint.c (m2_array): Likewise.
* p-typeprint.c (pascal_type_print_varspec_prefix): Likewise.
* gdbtypes.c (copy_type_recursive): Correct == typo.
* i386-tdep.c (i386_skip_prologue): Remove stray semicolon.
* linux-nat.c (linux_nat_info_proc_cmd): Don't compare a pointer
greater than zero.
* macroscope.c (sal_macro_scope): Don't name a local variable "main".
(default_macro_scope): Remove unused variable.
* prologue-value.h (pv_area_find_reg): Don't name an argument
"register".
* remote-fileio.c (remote_fio_func_map): Add missing braces.
* remote.c (sigint_remote_twice_token, sigint_remote_token): Change
type.
(cleanup_sigint_signal_handler): Remove casts.
* valprint.c (val_print): Use a volatile local for the modified
argument.
* varobj.c (languages): Remove extra array dimension.
(varobj_create): Correct access to languages array.
* mi/mi-cmd-break.c (mi_cmd_break_insert, mi_cmd_break_watch): Add
missing braces.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Likewise.
* mi/mi-cmd-env.c (mi_cmd_env_path, mi_cmd_env_dir): Likewise.
* mi/mi-getopt.c (mi_valid_noargs): Likewise.
* mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_write_memory): Likewise.
* signals/signals.c (target_signal_to_string): Cast to int before
comparing.
* tui/tui-layout.c (init_and_make_win): Take and return a void *.
Update all callers.
2007-01-03 19:01:25 +00:00
ce186b302c
* breakpoint.c (remove_breakpoint): Remove dead code.
2007-01-01 14:10:40 +00:00
69fbadd53d
* breakpoint.c (watchpoint_check): Double-check the found frame.
2006-12-18 22:10:13 +00:00
0767c96d9d
* breakpoint.c (insert_bp_location): Add newline to note.
2006-12-15 15:22:22 +00:00
765dc01564
2006-11-22 Vladimir Prus <vladimir@codesourcery.com>
...
* breakpoint.c: Include "memattr.h".
(automatic_hardware_breakpoints): New.
(show_automatic_hardware_breakpoints): New.
(insert_bp_location): Automatically use
hardware breakpoints.
(_initialize_breakpoint): Register the "auto-hw"
variable.
* Makefile.in (breakpoint.o): Update dependencies.
2006-11-22 10:43:34 +00:00
d674a25c2b
2006-10-19 Andrew Stubbs <andrew.stubbs@st.com>
...
* breakpoint.c (describe_other_breakpoints): Add thread parameter.
Annotate display with thread number where appropriate.
(create_breakpoints): Add thread parameter to call to
describe_other_breakpoints.
2006-10-19 15:58:25 +00:00
b40ce68a77
* breakpoint.c (free_valchain): Minor reformatting.
2006-10-17 21:53:26 +00:00
359a926234
* gdbcore.h (read_memory_nobpt): New function name instead of
...
deprecated_read_memory_nobpt.
* breakpoint.c (read_memory_nobpt): New function name instead
of deprecated_read_memory_nobpt.
Adjust calls to old deprecated_read_memory_nobpt accordingly.
* alpha-tdep.c: Adjust calls to deprecated_read_memory_nobpt
accordingly.
* alphanbsd-tdep.c: Likewise.
* frame.c: Likewise.
* frv-tdep.c: Likewise.
* hppa-linux-tdep.c: Likewise.
* hppa-tdep.c: Likewise.
* i386-linux-nat.c: Likewise.
* m68klinux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* s390-tdep.c: Likewise.
2006-08-08 21:32:48 +00:00
6798554723
* breakpoint.c (update_breakpoints_after_exec): Fix type mismatch.
2006-08-08 16:05:13 +00:00
1fbc2a49cc
(print_it_typical): Use EXEC_ASYNC_LOCATION_REACHED.
2006-06-02 03:43:18 +00:00
1893a4c08f
* breakpoint.c (insert_single_step_breakpoint): Make a failure to
...
insert a single-step breakpoint an error instead of a warning.
* breakpoint.c (remove_single_step_breakpoints): Bail out early if
no breakpoints are inserted.
2006-05-01 16:38:08 +00:00
8181d85fdc
gdb/
...
* breakpoint.c (deprecated_read_memory_nobpt): Update to use
shadow_len.
(insert_bp_location, reattach_breakpoints, remove_breakpoint)
(delete_breakpoint): Update calls to changed methods.
(deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint)
(single_step_breakpoints, insert_single_step_breakpoint)
(remove_single_step_breakpoints): New.
* breakpoint.h (struct bp_target_info): New.
(struct bp_location): Replace shadow_contents with
target_info and overlay_target_info.
(deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint)
(insert_single_step_breakpoint, remove_single_step_breakpoints): New
prototypes.
* gdbarch.sh: Forward declare struct bp_target_info in gdbarch.h.
(memory_insert_breakpoint, memory_remove_breakpoint): Update second
argument.
* mem-break.c (default_memory_insert_breakpoint): Update. Set
placed_address, placed_size, and shadow_len.
(default_memory_remove_breakpoint): Update. Don't use
BREAKPOINT_FROM_PC.
(memory_insert_breakpoint, memory_remove_breakpoint): Update.
* target.c (update_current_target): Update prototypes for changed
functions.
(debug_to_insert_breakpoint, debug_to_remove_breakpoint)
(debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint):
Update.
* target.h: Forward declare struct bp_target_info.
(struct target_ops): Use a bp_target_info argument for
to_insert_breakpoint, to_remove_breakpoint,
to_insert_hw_breakpoint, and to_remove_hw_breakpoint.
(target_insert_breakpoint, target_remove_breakpoint)
(target_insert_hw_breakpoint, target_remove_hw_breakpoint)
(memory_insert_breakpoint, memory_remove_breakpoint)
(default_memory_insert_breakpoint, default_memory_remove_breakpoint):
Update.
* config/i386/nm-i386.h: Forward declare struct bp_target_info.
(i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update.
(target_insert_hw_breakpoint, target_remove_hw_breakpoint): Likewise.
* gdbarch.c, gdbarch.h: Regenerated.
* alpha-tdep.c (alpha_software_single_step): Use
insert_single_step_breakpoint and remove_single_step_breakpoints.
Remove unused statics.
* arm-tdep.c (arm_software_single_step): Likewise. Add a note.
* cris-tdep.c (cris_software_single_step): Likewise.
* mips-tdep.c (mips_software_single_step): Likewise.
* rs6000-tdep.c (rs6000_software_single_step): Likewise.
* sparc-tdep.c (sparc_software_single_step): Likewise.
* wince.c (struct thread_info_struct): Remove step_prev.
(undoSStep): Use remove_single_step_breakpoints.
(wince_software_single_step): Use insert_single_step_breakpoint.
* corelow.c (ignore): Remove unneeded prototype. Update arguments.
* exec.c (ignore): Likewise.
* sol-thread.c (ignore): Likewise.
* procfs.c (dbx_link_shadow_contents): Delete.
(dbx_link_bpt): New.
(procfs_mourn_inferior): Remove it if necessary.
(remove_dbx_link_breakpoint): Use it.
(insert_dbx_link_bpt_in_file): Set it.
(procfs_init_inferior): Don't update dbx_link_bpt_addr.
* rs6000-nat.c (exec_one_dummy_insn): Use
deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint.
* solib-irix.c (shadow_contents, breakpoint_addr): Delete.
(base_breakpoint): New.
(disable_break): Use it.
(enable_break): Set it.
* i386-nat.c (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint):
Update.
* ia64-tdep.c (ia64_memory_insert_breakpoint)
(ia64_memory_remove_breakpoint): Likewise.
* m32r-tdep.c (m32r_memory_insert_breakpoint)
(m32r_memory_remove_breakpoint): Likewise.
* monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
Likewise. Remove unnecessary prototypes. Use placed_address
and placed_size. Removed useless read from memory.
* nto-procfs.c (procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint): Update.
* ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise.
* ocd.h (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Likewise.
* remote-e7000.c (e7000_insert_breakpoint)
(e7000_remove_breakpoint): Likewise.
* remote-m32r-sdi.c (m32r_insert_breakpoint)
(m32r_remove_breakpoint): Likewise.
* remote-mips.c (mips_insert_breakpoint)
(mips_remove_breakpoint): Likewise.
* remote-rdp.c (remote_rdp_insert_breakpoint)
(remote_rdp_remove_breakpoint): Likewise.
(rdp_step): Use deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint.
* remote-sds.c (sds_insert_breakpoint, sds_remove_breakpoint):
Update.
* remote-sim.c (gdbsim_insert_breakpoint, gdbsim_remove_breakpoint):
Delete.
(init_gdbsim_ops): Use memory_insert_breakpoint and
memory_remove_breakpoint.
* remote-st.c (st2000_insert_breakpoint)
(st2000_remove_breakpoint): Update. Remove unused
BREAKPOINT_FROM_PC.
* remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
Update. Use placed_address and placed_size.
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise.
gdb/doc/
* gdbint.texinfo (x86 Watchpoints, Target Conditionals): Update insert
and remove breakpoint prototypes.
(Watchpoints): Move description of target_insert_hw_breakpoint and
target_remove_hw_breakpoint ...
(Breakpoints): ... to here. Document target_insert_breakpoint and
target_remove_breakpoint.
2006-04-18 19:20:08 +00:00
7f198e01c2
* breakpoint.c (_initialize_breakpoint): Add "del" as an alias
...
of the "delete" command.
2006-04-06 18:33:05 +00:00
0f699bbe04
(print_one_breakpoint): Add break to case
...
bp_catch_vfork in switch statement.
2006-02-09 11:24:46 +00:00
2a3cdf79c3
* breakpoint.c (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Delete.
...
* config/i386/nm-i386sol2.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New.
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
* config/mips/nm-irix5.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New.
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
* config/sparc/nm-sol2.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New.
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
* inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): New.
(inf_ttrace_region_size_ok_for_hw_watchpoint): Delete.
(inf_ttrace_target): Delete to_region_size_ok_for_hw_watchpoint and
add to_region_ok_for_hw_watchpoint.
* s390-nat.c (s390_region_size_ok_for_hw_watchpoint): Delete.
(s390_region_ok_for_hw_watchpoint): New.
(_initialize_s390_nat): Delete to_region_size_ok_for_hw_watchpoint
and add to_region_ok_for_hw_watchpoint.
* target.c (default_region_size_ok_for_hw_watchpoint,
debug_to_region_size_ok_for_hw_watchpoint): Delete prototype.
(update_current_target): Delete to_region_size_ok_for_hw_watchpoint
inheritance and default_region_size_ok_for_hw_watchpoint.
(default_region_ok_for_hw_watchpoint): If len is less than or equal
the length of void pointer, return ok.
(default_region_size_ok_for_hw_watchpoint): Delete.
(debug_to_region_size_ok_for_hw_watchpoint): Delete.
(setup_target_debug): Delete to_region_size_ok_for_hw_watchpoint.
* target.h (struct target_ops): Delete
to_region_size_ok_for_hw_watchpoint.
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
2006-02-08 06:43:00 +00:00
38fcd64c3a
From Vladimir Prus <ghost@cs.msu.su>:
...
gdb/
* breakpoint.c (print_one_breakpoint): For MI-like UI, output
fullname field.
gdb/doc/
* gdb.texinfo (Breakpoint table commands): Document the fullname
field in -break-list output.
gdb/testsuite/
* gdb.mi/mi-break.exp, gdb.mi/mi2-break.exp: Test for the fullname
field.
2006-02-06 21:55:06 +00:00
f365de7342
2006-01-16 Andrew Stubbs <andrew.stubbs@st.com>
...
* breakpoint.c (insert_breakpoints): Check that a thread exists
before inserting thread specific breakpoints.
2006-01-16 12:55:18 +00:00
197e01b6dc
* breakpoint.c:
...
* arm-tdep.c:
* ia64-tdep.c:
* i386-tdep.c:
* hpread.c:
* hppa-tdep.c:
* hppa-hpux-tdep.c:
* gnu-nat.c:
* gdbtypes.c:
* gdbarch.h:
* gdbarch.c:
* eval.c:
* dwarf2read.c:
* dbxread.c:
* copying:
* symfile.c:
* stabsread.c:
* sh64-tdep.c:
* sh-tdep.c:
* s390-tdep.c:
* rs6000-tdep.c:
* remote.c:
* remote-mips.c:
* mips-tdep.c:
* mdebugread.c:
* linux-nat.c:
* infrun.c:
* xcoffread.c:
* win32-nat.c:
* valops.c:
* utils.c:
* tracepoint.c:
* target.c:
* symtab.c:
* c-exp.y:
* ada-valprint.c:
* ada-typeprint.c:
* ada-lex.l:
* ada-lang.h:
* ada-lang.c:
* ada-exp.y:
* alphafbsd-tdep.c:
* alphabsd-tdep.h:
* alphabsd-tdep.c:
* alphabsd-nat.c:
* alpha-tdep.h:
* alpha-tdep.c:
* alpha-osf1-tdep.c:
* alpha-nat.c:
* alpha-mdebug-tdep.c:
* alpha-linux-tdep.c:
* alpha-linux-nat.c:
* aix-thread.c:
* abug-rom.c:
* arch-utils.c:
* annotate.h:
* annotate.c:
* amd64obsd-tdep.c:
* amd64obsd-nat.c:
* amd64nbsd-tdep.c:
* amd64nbsd-nat.c:
* amd64fbsd-tdep.c:
* amd64fbsd-nat.c:
* amd64bsd-nat.c:
* amd64-tdep.h:
* amd64-tdep.c:
* amd64-sol2-tdep.c:
* amd64-nat.h:
* amd64-nat.c:
* amd64-linux-tdep.c:
* amd64-linux-nat.c:
* alphanbsd-tdep.c:
* block.h:
* block.c:
* bfd-target.h:
* bfd-target.c:
* bcache.h:
* bcache.c:
* ax.h:
* ax-general.c:
* ax-gdb.h:
* ax-gdb.c:
* avr-tdep.c:
* auxv.h:
* auxv.c:
* armnbsd-tdep.c:
* armnbsd-nat.c:
* arm-tdep.h:
* arm-linux-nat.c:
* arch-utils.h:
* charset.c:
* call-cmds.h:
* c-valprint.c:
* c-typeprint.c:
* c-lang.h:
* c-lang.c:
* buildsym.h:
* buildsym.c:
* bsd-uthread.h:
* bsd-uthread.c:
* bsd-kvm.h:
* bsd-kvm.c:
* breakpoint.h:
* core-regset.c:
* core-aout.c:
* completer.h:
* completer.c:
* complaints.h:
* complaints.c:
* command.h:
* coffread.c:
* coff-solib.h:
* coff-solib.c:
* coff-pe-read.h:
* coff-pe-read.c:
* cli-out.h:
* cli-out.c:
* charset.h:
* dink32-rom.c:
* dictionary.h:
* dictionary.c:
* demangle.c:
* defs.h:
* dcache.h:
* dcache.c:
* d10v-tdep.c:
* cpu32bug-rom.c:
* cp-valprint.c:
* cp-support.h:
* cp-support.c:
* cp-namespace.c:
* cp-abi.h:
* cp-abi.c:
* corelow.c:
* corefile.c:
* environ.c:
* elfread.c:
* dwarfread.c:
* dwarf2loc.c:
* dwarf2expr.h:
* dwarf2expr.c:
* dwarf2-frame.h:
* dwarf2-frame.c:
* dve3900-rom.c:
* dummy-frame.h:
* dummy-frame.c:
* dsrec.c:
* doublest.h:
* doublest.c:
* disasm.h:
* disasm.c:
* fork-child.c:
* findvar.c:
* fbsd-nat.h:
* fbsd-nat.c:
* f-valprint.c:
* f-typeprint.c:
* f-lang.h:
* f-lang.c:
* expression.h:
* expprint.c:
* exec.h:
* exec.c:
* exceptions.h:
* exceptions.c:
* event-top.h:
* event-top.c:
* event-loop.h:
* event-loop.c:
* gdb.c:
* gdb-stabs.h:
* gdb-events.h:
* gdb-events.c:
* gcore.c:
* frv-tdep.h:
* frv-tdep.c:
* frv-linux-tdep.c:
* frame.h:
* frame.c:
* frame-unwind.h:
* frame-unwind.c:
* frame-base.h:
* frame-base.c:
* gdb_vfork.h:
* gdb_thread_db.h:
* gdb_string.h:
* gdb_stat.h:
* gdb_regex.h:
* gdb_ptrace.h:
* gdb_proc_service.h:
* gdb_obstack.h:
* gdb_locale.h:
* gdb_dirent.h:
* gdb_curses.h:
* gdb_assert.h:
* gdbarch.sh:
* gdb.h:
* hpux-thread.c:
* hppabsd-nat.c:
* hppa-tdep.h:
* hpacc-abi.c:
* h8300-tdep.c:
* gregset.h:
* go32-nat.c:
* gnu-v3-abi.c:
* gnu-v2-abi.h:
* gnu-v2-abi.c:
* gnu-nat.h:
* glibc-tdep.c:
* gdbtypes.h:
* gdbcore.h:
* gdbcmd.h:
* i386nbsd-tdep.c:
* i386nbsd-nat.c:
* i386gnu-tdep.c:
* i386gnu-nat.c:
* i386fbsd-tdep.c:
* i386fbsd-nat.c:
* i386bsd-tdep.c:
* i386bsd-nat.h:
* i386bsd-nat.c:
* i386-tdep.h:
* i386-sol2-nat.c:
* i386-nto-tdep.c:
* i386-nat.c:
* i386-linux-tdep.h:
* i386-linux-tdep.c:
* i386-linux-nat.c:
* i386-cygwin-tdep.c:
* inf-ttrace.c:
* inf-ptrace.h:
* inf-ptrace.c:
* inf-loop.h:
* inf-loop.c:
* inf-child.h:
* inf-child.c:
* ia64-tdep.h:
* ia64-linux-nat.c:
* i387-tdep.h:
* i387-tdep.c:
* i386v4-nat.c:
* i386v-nat.c:
* i386obsd-tdep.c:
* i386obsd-nat.c:
* kod.c:
* jv-valprint.c:
* jv-typeprint.c:
* jv-lang.h:
* jv-lang.c:
* irix5-nat.c:
* iq2000-tdep.c:
* interps.h:
* interps.c:
* inftarg.c:
* inflow.h:
* inflow.c:
* inferior.h:
* infcmd.c:
* infcall.h:
* infcall.c:
* inf-ttrace.h:
* m32r-tdep.h:
* m32r-tdep.c:
* m32r-rom.c:
* m32r-linux-tdep.c:
* m32r-linux-nat.c:
* m2-valprint.c:
* m2-typeprint.c:
* m2-lang.h:
* m2-lang.c:
* lynx-nat.c:
* linux-thread-db.c:
* linux-nat.h:
* linespec.c:
* libunwind-frame.h:
* libunwind-frame.c:
* language.h:
* language.c:
* macroexp.c:
* macrocmd.c:
* m88kbsd-nat.c:
* m88k-tdep.h:
* m88k-tdep.c:
* m68klinux-tdep.c:
* m68klinux-nat.c:
* m68kbsd-tdep.c:
* m68kbsd-nat.c:
* m68k-tdep.h:
* m68k-tdep.c:
* mips-linux-nat.c:
* mips-irix-tdep.c:
* minsyms.c:
* memattr.h:
* memattr.c:
* mem-break.c:
* mdebugread.h:
* main.h:
* main.c:
* macrotab.h:
* macrotab.c:
* macroscope.h:
* macroscope.c:
* macroexp.h:
* nbsd-tdep.c:
* mt-tdep.c:
* monitor.h:
* monitor.c:
* mn10300-tdep.h:
* mn10300-tdep.c:
* mn10300-linux-tdep.c:
* mipsv4-nat.c:
* mipsread.c:
* mipsnbsd-tdep.h:
* mipsnbsd-tdep.c:
* mipsnbsd-nat.c:
* mips64obsd-tdep.c:
* mips64obsd-nat.c:
* mips-tdep.h:
* mips-mdebug-tdep.c:
* mips-linux-tdep.c:
* osabi.h:
* osabi.c:
* ocd.h:
* ocd.c:
* observer.c:
* objfiles.h:
* objfiles.c:
* objc-lang.h:
* objc-lang.c:
* objc-exp.y:
* nto-tdep.h:
* nto-tdep.c:
* nto-procfs.c:
* nlmread.c:
* nbsd-tdep.h:
* ppcobsd-tdep.c:
* ppcobsd-nat.c:
* ppcnbsd-tdep.h:
* ppcnbsd-tdep.c:
* ppcnbsd-nat.c:
* ppcbug-rom.c:
* ppc-tdep.h:
* ppc-sysv-tdep.c:
* ppc-linux-tdep.c:
* ppc-linux-nat.c:
* ppc-bdm.c:
* parser-defs.h:
* parse.c:
* p-valprint.c:
* p-typeprint.c:
* p-lang.h:
* p-lang.c:
* remote-fileio.h:
* remote-fileio.c:
* remote-est.c:
* remote-e7000.c:
* regset.h:
* regset.c:
* reggroups.h:
* reggroups.c:
* regcache.h:
* regcache.c:
* proc-why.c:
* proc-service.c:
* proc-events.c:
* printcmd.c:
* ppcobsd-tdep.h:
* sentinel-frame.h:
* sentinel-frame.c:
* scm-valprint.c:
* scm-tags.h:
* scm-lang.h:
* scm-lang.c:
* scm-exp.c:
* s390-tdep.h:
* rom68k-rom.c:
* remote.h:
* remote-utils.c:
* remote-st.c:
* remote-sim.c:
* remote-sds.c:
* remote-rdp.c:
* remote-rdi.c:
* remote-hms.c:
* sim-regno.h:
* shnbsd-tdep.h:
* shnbsd-tdep.c:
* shnbsd-nat.c:
* sh-tdep.h:
* serial.h:
* serial.c:
* ser-unix.h:
* ser-unix.c:
* ser-tcp.c:
* ser-pipe.c:
* ser-go32.c:
* ser-e7kpc.c:
* ser-base.h:
* ser-base.c:
* solib.c:
* solib-svr4.h:
* solib-svr4.c:
* solib-sunos.c:
* solib-som.h:
* solib-som.c:
* solib-pa64.h:
* solib-pa64.c:
* solib-osf.c:
* solib-null.c:
* solib-legacy.c:
* solib-irix.c:
* solib-frv.c:
* solib-aix5.c:
* sol-thread.c:
* sparc64-linux-tdep.c:
* sparc64-linux-nat.c:
* sparc-tdep.h:
* sparc-tdep.c:
* sparc-sol2-tdep.c:
* sparc-sol2-nat.c:
* sparc-nat.h:
* sparc-nat.c:
* sparc-linux-tdep.c:
* sparc-linux-nat.c:
* source.h:
* source.c:
* somread.c:
* solist.h:
* solib.h:
* std-regs.c:
* stack.h:
* stack.c:
* stabsread.h:
* sparcobsd-tdep.c:
* sparcnbsd-tdep.c:
* sparcnbsd-nat.c:
* sparc64obsd-tdep.c:
* sparc64nbsd-tdep.c:
* sparc64nbsd-nat.c:
* sparc64fbsd-tdep.c:
* sparc64fbsd-nat.c:
* sparc64-tdep.h:
* sparc64-tdep.c:
* sparc64-sol2-tdep.c:
* sparc64-nat.c:
* ui-file.c:
* typeprint.h:
* typeprint.c:
* tramp-frame.h:
* tramp-frame.c:
* trad-frame.h:
* trad-frame.c:
* tracepoint.h:
* top.c:
* tobs.inc:
* thread.c:
* terminal.h:
* target.h:
* symfile.h:
* stop-gdb.c:
* vaxbsd-nat.c:
* vax-tdep.h:
* vax-tdep.c:
* vax-nat.c:
* varobj.h:
* varobj.c:
* value.h:
* value.c:
* valprint.h:
* valprint.c:
* v850-tdep.c:
* uw-thread.c:
* user-regs.c:
* ui-out.h:
* ui-out.c:
* ui-file.h:
* xcoffsolib.h:
* xcoffsolib.c:
* wrapper.c:
* wince.c:
* wince-stub.h:
* wince-stub.c:
* vaxobsd-tdep.c:
* vaxnbsd-tdep.c:
* gdb_gcore.sh:
* copying.c:
* configure.ac:
* aclocal.m4:
* acinclude.m4:
* reply_mig_hack.awk:
* observer.sh:
* gdb_mbuild.sh:
* arm-linux-tdep.c:
* blockframe.c:
* dbug-rom.c:
* environ.h:
* dwarf2loc.h:
* gdb-events.sh:
* glibc-tdep.h:
* gdb_wait.h:
* gdbthread.h:
* i386-sol2-tdep.c:
* hppabsd-tdep.c:
* hppa-linux-nat.c:
* hppa-hpux-nat.c:
* ia64-linux-tdep.c:
* infptrace.c:
* linespec.h:
* maint.c:
* mips-mdebug-tdep.h:
* remote-m32r-sdi.c:
* s390-nat.c:
* rs6000-nat.c:
* remote-utils.h:
* sh3-rom.c:
* sh-linux-tdep.c:
* top.h:
* symtab.h:
* symmisc.c:
* symfile-mem.c:
* srec.h:
* user-regs.h:
* version.h:
* valarith.c:
* xstormy16-tdep.c:
* wrapper.h:
* Makefile.in:
* f-exp.y:
* cris-tdep.c:
* cp-name-parser.y:
* procfs.c:
* proc-utils.h:
* proc-flags.c:
* proc-api.c:
* p-exp.y:
* m68hc11-tdep.c:
* m2-exp.y:
* kod.h:
* kod-cisco.c:
* jv-exp.y:
* hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF
address.
2005-12-17 22:34:03 +00:00
31e2b00f59
2005-12-02 Andrew Stubbs <andrew.stubbs@st.com>
...
* breakpoint.c (BREAK_ARGS_HELP): New mecro.
(_initialize_breakpoint): Enhance break, tbreak, hbreak and thbreak
commands' help by adding more information and using BREAK_ARGS_HELP
to duplicate the common parts. Remove now-redundant cross-references.
testsuite/
* gdb.base/help.exp (help b, help br, help bre, help brea)
(help break): Update the expected message.
2005-12-02 14:58:18 +00:00
034dad6fa1
This is a cleanup change. It is the beggining of allowing GDB/MI to be
...
better understood (internally).
2005-05-29 03:13:19 +00:00
47b667dea5
2005-05-26 Andrew Cagney <cagney@gnu.org>
...
* command.h (add_setshow_integer_cmd): Make VAR an integer.
* cli/cli-decode.c (add_setshow_integer_cmd): Update to match.
* valops.c (value_string): Add a cast.
* eval.c (evaluate_subexp_standard): Use gdb_byte for byte buffers.
* breakpoint.c (re_enable_breakpoints_in_shlibs): Use gdb_byte for
byte buffers.
* target.h (struct target_ops): For to_insert_hw_breakpoint and
to_remove_hw_breakpoint use gdb_byte for byte buffer parameters.
* breakpoint.h (struct bp_location): Make shadow_contents a
gdb_byte buffer.
* cli/cli-setshow.c (do_setshow_command): Fix cast.
* cli/cli-dump.c (restore_section_callback)
(restore_binary_file): Use gdb_byte for byte buffers.
* proc-service.c (ps_ptwrite, ps_ptread, ps_pdwrite): Fix casts.
(ps_xfer_memory): Use gdb_byte for byte buffers.
* tracepoint.c (mem2hex): Use gdb_byte for byte buffers, and char
for string buffers.
* ser-tcp.c (net_open): Make len a socklen_t.
2005-05-26 20:49:03 +00:00
10c42a7141
2005-05-22 Andrew Cagney <cagney@gnu.org>
...
* frame.h (frame_register_unwind, frame_unwind_register)
(get_frame_register, frame_register, put_frame_register)
(get_frame_memory, safe_frame_unwind_memory)
(frame_register_read): Use gdb_byte for byte buffer parameters.
* trad-frame.h (trad_frame_get_register)
(frame_get_prev_register): Ditto.
* frame-unwind.h (frame_prev_register_ftype): Ditto.
* frame.c (frame_pop, frame_register, frame_unwind_register)
(get_frame_register, frame_unwind_register_signed)
(frame_unwind_register_unsigned, frame_unwind_unsigned_register)
(frame_register_read, get_frame_memory): Update.
* trad-frame.c (trad_frame_get_prev_register): Update.
(trad_frame_get_register): Update.
* gdbcore.h (deprecated_read_memory_nobpt, read_memory): Ditto.
* breakpoint.c (deprecated_read_memory_nobpt): Update.
* corefile.c (read_memory): Update.
* tramp-frame.c (tramp_frame_prev_register): Update.
* valops.c (value_assign): Update.
* sentinel-frame.c (sentinel_frame_prev_register): Update.
* std-regs.c (value_of_builtin_frame_fp_reg)
(value_of_builtin_frame_pc_reg): Update.
* infcmd.c (default_print_registers_info): Update
* dummy-frame.c (dummy_frame_prev_register): Update.
* findvar.c (value_of_register, value_from_register): Update.
* tui/tui-regs.c (tui_register_format, tui_get_register): Update.
* mi/mi-main.c (register_changed_p, get_register): Update.
2005-05-22 14:53:35 +00:00
a77053c217
* solib.h (CLEAR_SOLIB, SOLIB_ADD)
...
(SOLIB_CREATE_INFERIOR_HOOK, SOLIB_REMOVE_INFERIOR_HOOK)
(SOLIB_IN_DYNAMIC_LINKER, SOLIB_RESTART)
(DISABLE_UNSETTABLE_BREAK, PC_SOLIB)
(IN_SOLIB_DYNSYM_RESOLVE_CODE): Remove defines and orphaned
comments.
* breakpoint.c: Include "solib.h".
(insert_bp_location) [!DISABLE_UNSETTABLE_BREAK]: Call
solib_address.
(remove_solib_event_breakpoints, create_solib_event_breakpoint)
(disable_breakpoints_in_shlibs)
(disable_breakpoints_in_unloaded_shlib)
(re_enable_breakpoints_in_shlibs): Compile if SOLIB_ADD isn't
defined. If PC_SOLIB isn't defined, call solib_address.
(_initialize_breakpoint): Unconditionally install observer.
* corelow.c: Include "solib.h".
[SOLIB_ADD] (solib_add_stub): Remove prototype.
(core_close) [!CLEAR_SOLIB]: Call clear_solib.
(solib_add_stub) [!SOLIB_ADD] Call solib_add.
(core_open): Unconditionally call solib_add_stub.
* fork-child.c: Include "solib.h".
(fork_inferior) [!SOLIB_CREATE_INFERIOR_HOOK]: Call
solib_create_inferior_hook.
* infcmd.c: Include "solib.h".
(attach_command) [!SOLIB_ADD]: Call shlib_rescan. Unconditionally
call re_enable_breakpoints_in_shlibs.
* infrun.c: Include "solib.h".
(SOLIB_IN_SYNSYM_RESOLVE_CODE): Don't define if not already
defined.
(stop_on_solib_events, show_stop_on_solib_events): Include
unconditionally.
(follow_exec) [!SOLIB_CREATE_INFERIOR_HOOK]: Call
solib_create_inferior_hook.
(handle_inferior_event) [!SOLIB_ADD]: Call shlib_add.
[!IN_SOLIB_DYNSYM_RESOLVE_CODE]: Call in_solib_dynsym_resolve_code.
(_initialize_infrun): Unconditionally add "stop_on_solib-events"
command.
* remote.c: Include "solib.h".
(remote_open_1): Unconditionally call no_shared_libraries.
[!SOLIB_CREATE_INFERIOR_HOOK] Call solib_create_inferior_hook.
* stack.c: Include "solib.h".
(print_frame) [!PC_SOLIB] Call shlib_for_pc.
* xcoffsolib.c (no_shared_libraries): Remove function.
* Makefile.in (SFILES): Add solib.c.
(ALLDEPFILES): Remove solib.c.
(COMMON_OBS): Add solib.o.
(breakpoint.o, corelow.o, fork-chiled.o, infcmd.o, infrun.o)
(remote.o, stack.o): Update dependencies.
2005-05-12 20:21:18 +00:00
71fff37b08
2005-04-26 Andrew Cagney <cagney@gnu.org>
...
Rename 'struct exception' to 'struct gdb_exception'.
* wrapper.c: Update.
* varobj.c: Update.
* tui/tui-interp.c: Update.
* remote.c: Update.
* mi/mi-main.c: Update.
* mi/mi-interp.c: Update.
* linux-thread-db.c: Update.
* interps.h: Update.
* interps.c: Update.
* exceptions.h: Update.
* exceptions.c: Update.
* dwarf2loc.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* breakpoint.c: Update.
2005-04-26 05:03:41 +00:00
920d2a4419
2005-02-24 Andrew Cagney <cagney@gnu.org>
...
Add show_VARIABLE functions, update add_setshow call.
* varobj.c (_initialize_varobj, show_varobjdebug): Add and update.
* valprint.c (_initialize_valprint, show_print_max)
(show_stop_print_at_null, show_repeat_count_threshold)
(show_prettyprint_structs, show_unionprint)
(show_prettyprint_arrays, show_addressprint, show_input_radix)
(show_output_radix): Ditto.
* valops.c (_initialize_valops, show_overload_resolution): Ditto.
* utils.c (initialize_utils, show_chars_per_line)
(show_lines_per_page, show_demangle, show_pagination_enabled)
(show_sevenbit_strings, show_asm_demangle): Ditto
* tui/tui-win.c (_initialize_tui_win, show_tui_border_kind)
(show_tui_border_mode, show_tui_active_border_mode): Ditto.
* top.c (init_main, show_new_async_prompt)
(show_async_command_editing_p, show_write_history_p)
(show_history_size, show_history_filename, show_caution)
(show_annotation_level, init_main): Ditto.
* target.c (initialize_targets, show_targetdebug)
(show_trust_readonly): Ditto.
* symfile.c (_initialize_symfile, show_symbol_reloading)
(show_ext_args, show_download_write_size)
(show_debug_file_directory): Ditto.
* source.c (_initialize_source, show_lines_to_list): Ditto.
* solib.c (_initialize_solib, show_auto_solib_add)
(show_solib_search_path): Ditto.
* p-valprint.c (_initialize_pascal_valprint)
(show_pascal_static_field_print): Ditto.
* printcmd.c (_initialize_printcmd, show_max_symbolic_offset)
(show_print_symbol_filename): Add and update.
* parse.c (_initialize_parse, show_expressiondebug): Dito.
* observer.c (_initialize_observer, show_observer_debug): Dito.
* maint.c (_initialize_maint_cmds, show_watchdog)
(show_maintenance_profile_p): Dito.
* linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito.
* infrun.c (_initialize_infrun, show_debug_infrun)
(show_stop_on_solib_events, show_follow_fork_mode_string)
(show_scheduler_mode, show_step_stop_if_no_debug): Ditto.
* infcall.c (_initialize_infcall, show_coerce_float_to_double_p)
(show_unwind_on_signal_p): Ditto.
* gdbtypes.c (build_gdbtypes, show_opaque_type_resolution)
(_initialize_gdbtypes, show_overload_debug): Ditto.
* gdb-events.c, gdb-events.sh (_initialize_gdb_events)
(show_gdb_events_debug): Ditto.
* gdbarch.c, gdbarch.sh (show_gdbarch_debug)
(_initialize_gdbarch): Ditto.
* frame.c (_initialize_frame, show_backtrace_past_main)
(show_backtrace_past_entry, show_backtrace_limit)
(show_frame_debug): Ditto.
* exec.c (_initialize_exec, show_write_files): Ditto.
* dwarf2read.c (_initialize_dwarf2_read)
(show_dwarf2_max_cache_age): Ditto.
* demangle.c (_initialize_demangler)
(show_demangling_style_names): Ditto.
* dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto.
* cp-valprint.c (show_static_field_print)
(_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto.
* corefile.c (_initialize_core, show_gnutarget_string): Ditto.
* cli/cli-logging.c (_initialize_cli_logging)
(show_logging_overwrite, show_logging_redirect)
(show_logging_filename): Ditto.
* cli/cli-cmds.c (show_info_verbose, show_history_expansion_p)
(init_cli_cmds, show_baud_rate, show_remote_debug)
(show_remote_timeout, show_max_user_call_depth): Ditto.
* charset.c (show_host_charset_name, show_target_charset_name)
(initialize_charset): Ditto.
* breakpoint.c (show_can_use_hw_watchpoints)
(show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 13:51:36 +00:00
85c078043b
2005-02-18 Andrew Cagney <cagney@gnu.org>
...
Use add_setshow_zinteger_cmd through out. Re-sync gdbarch.sh
and gdbarch.c.
* breakpoint.c, frame.c, gdb-events.sh, gdbarch.sh: Update.
* gdbtypes.c, infrun.c, linux-nat.c, maint.c, monitor.c: Update.
* pa64solib.c, parse.c, remote-mips.c, ser-go32.c: Update.
* serial.c, solib-frv.c, somsolib.c, target.c, top.c: Update.
* varobj.c, cli/cli-cmds.c: Update.
* gdbarch.c, gdb-events.c: Regenerate.
2005-02-18 18:58:56 +00:00
2c5b56ce99
2005-02-17 Andrew Cagney <cagney@gnu.org>
...
* cli/cli-decode.c (add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete
fprint_setshow parameter.
* command.h (fprint_setshow_ftype): Delete.
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete
fprint_setshow parameter.
* aix-thread.c, alpha-tdep.c, arm-tdep.c, breakpoint.c: Update.
* complaints.c, cris-tdep.c, dwarf2read.c, frame.c: Update.
* hppa-tdep.c, infcall.c, m32r-rom.c, maint.c: Update.
* mips-tdep.c, nto-tdep.c, observer.c, remote-rdi.c: Update
* remote.c, target.c, cli/cli-logging.c: Update.
2005-02-17 13:49:56 +00:00
1bedd21517
2005-02-15 Andrew Cagney <cagney@gnu.org>
...
Mark up add_com, add_info and add_prefix_cmd.
* breakpoint.c, cp-support.c, dcache.c, dwarf2read.c: Update.
* exec.c, f-valprint.c, frame.c, gcore.c, gnu-nat.c: Update.
* go32-nat.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* kod.c, language.c, linux-nat.c, m32r-rom.c, macrocmd.c: Update.
* maint.c, memattr.c, mips-tdep.c, nto-procfs.c, objc-lang.c: Update.
* ocd.c, pa64solib.c, printcmd.c, procfs.c, regcache.c: Update.
* remote-e7000.c, remote-m32r-sdi.c, remote-mips.c: Update.
* remote-sds.c, remote-sim.c, remote-st.c, remote-utils.c: Update.
* remote.c, rs6000-tdep.c, ser-go32.c, serial.c: Update.
* sh-tdep.c, solib.c, somsolib.c, source.c, stack.c: Update.
* symfile.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, typeprint.c, utils.c, valprint.c: Update.
* win32-nat.c, xcoffsolib.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
* cli/cli-logging.c, tui/tui-layout.c, tui/tui-regs.c: Update.
* tui/tui-stack.c, tui/tui-win.c: Update.
2005-02-15 15:49:28 +00:00
1a966eabdf
2005-02-14 Andrew Cagney <cagney@gnu.org>
...
Mark up add_cmd.
* arch-utils.c, avr-tdep.c, breakpoint.c, corefile.c: Update.
* cp-abi.c, cp-namespace.c, cp-support.c, dummy-frame.c: Update.
* exec.c, gnu-nat.c, go32-nat.c, hppa-tdep.c, infcmd.c: Update.
* infrun.c, interps.c, macrocmd.c, maint.c, memattr.c: Update.
* mips-tdep.c, ocd.c, osabi.c, printcmd.c, regcache.c: Update.
* reggroups.c, remote-fileio.c, remote-rdi.c, remote.c: Update.
* sol-thread.c, source.c, stack.c, symfile-mem.c: Update.
* symfile.c, thread.c, tracepoint.c, valprint.c, value.c: Update.
* win32-nat.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
* cli/cli-logging.c, tui/tui-regs.c: Update.
2005-02-14 18:10:11 +00:00
7915a72c7f
2005-02-14 Andrew Cagney <cagney@gnu.org>
...
Mark up add_setshow functions, replace "PRINT:" comment prefix
with "FIXME: i18n:".
* aix-thread.c, alpha-tdep.c, arm-tdep.c, breakpoint.c: Update.
* cris-tdep.c, dwarf2read.c, frame.c, hppa-tdep.c: Update.
* infcall.c, m32r-rom.c, maint.c, mips-tdep.c: Update.
* nto-tdep.c, observer.c, remote-rdi.c, remote.c: Update.
* target.c, cli/cli-logging.c: Update.
2005-02-14 16:18:43 +00:00
66bf4b3a03
2005-02-14 Andrew Cagney <cagney@gnu.org>
...
* utils.c (paddress): New function.
* defs.h (paddress): Declare.
* printcmd.c (deprecated_print_address_numeric): Rename
print_address_numeric, call paddress.
* valprint.c, ui-out.c, tui/tui-stack.c, tracepoint.c: Update.
* symmisc.c, symfile.c stack.c, p-valprint.c, printcmd.c: Update.
* maint.c, m32r-rom.c, infcmd.c, f-valprint.c, exec.c: Update.
* dwarf2read.c, dve3900-rom.c, defs.h, c-valprint.c: Update.
* corefile.c, cli/cli-cmds.c, breakpoint.c, annotate.c: Update.
* ada-valprint.c: Update.
2005-02-14 14:37:38 +00:00
a3f171870f
2005-02-11 Andrew Cagney <cagney@gnu.org>
...
Mark up some of printf_filtered and printf_unfiltered.
* ada-lang.c, annotate.c, arch-utils.c, breakpoint.c: Update.
* corelow.c, cp-namespace.c, cp-support.c, dcache.c: Update.
* demangle.c, dsrec.c, dwarf2read.c, dwarfread.c: Update.
* event-loop.c, event-top.c, exec.c, f-valprint.c: Update.
* gdbtypes.c, inf-loop.c, inf-ptrace.c, inf-ttrace.c: Update.
* infcmd.c, inflow.c, infrun.c, inftarg.c, language.c: Update.
* linespec.c, linux-nat.c, linux-thread-db.c, maint.c: Update.
* mdebugread.c, memattr.c, monitor.c, objc-lang.c: Update.
* ocd.c, osabi.c, printcmd.c, procfs.c, regcache.c: Update.
* remote.c, solib-som.c, solib.c, somsolib.c, source.c: Update.
* stack.c, symfile.c, symmisc.c, target.c, thread.c: Update.
* top.c, utils.c, valprint.c, value.c, cli/cli-cmds.c: Update.
* cli/cli-dump.c, cli/cli-logging.c, tui/tui-hooks.c: Update.
* tui/tui-regs.c, tui/tui-win.c: Update.
2005-02-12 00:39:24 +00:00
e2e0b3e57f
2005-02-11 Andrew Cagney <cagney@gnu.org>
...
Mark up error_no_arg, query, perror_with_name, complaint, and
internal_error.
* breakpoint.c, cp-abi.c, cp-namespace.c, cp-support.c: Update.
* cris-tdep.c, dbxread.c, dictionary.c, dsrec.c: Update.
* dummy-frame.c, dve3900-rom.c, dwarf2-frame.c, dwarf2expr.c: Update.
* dwarf2read.c, dwarfread.c, elfread.c, event-loop.c: Update.
* exceptions.c, exec.c, f-lang.c, findvar.c, fork-child.c: Update.
* frame-unwind.c, frame.c, frv-linux-tdep.c, frv-tdep.c: Update.
* gdb_assert.h, gdbarch.c, gdbtypes.c, gnu-nat.c: Update.
* go32-nat.c, hppa-tdep.c, hppabsd-nat.c, hpread.c: Update.
* i386-linux-nat.c, i386-nat.c, i386-tdep.c, i386bsd-nat.c: Update.
* i386fbsd-nat.c, inf-ptrace.c, inf-ttrace.c, infcall.c: Update.
* infcmd.c, inflow.c, infptrace.c, infrun.c, inftarg.c: Update.
* interps.c, language.c, linespec.c, linux-nat.c: Update.
* m32r-linux-nat.c, m68k-tdep.c, m68kbsd-nat.c: Update.
* m68klinux-nat.c, m88kbsd-nat.c, macroexp.c, macroscope.c: Update.
* macrotab.c, maint.c, mdebugread.c, memattr.c: Update.
* mips-linux-tdep.c, mips-tdep.c, mips64obsd-nat.c: Update.
* mipsnbsd-nat.c, mn10300-tdep.c, monitor.c, nto-procfs.c: Update.
* objc-lang.c, objfiles.c, objfiles.h, ocd.c, osabi.c: Update.
* parse.c, ppc-bdm.c, ppc-linux-nat.c, ppc-sysv-tdep.c: Update.
* ppcnbsd-nat.c, ppcobsd-nat.c, printcmd.c, procfs.c: Update.
* regcache.c, reggroups.c, remote-e7000.c, remote-mips.c: Update.
* remote-rdp.c, remote-sds.c, remote-sim.c, remote-st.c: Update.
* remote-utils.c, remote.c, rs6000-nat.c, rs6000-tdep.c: Update.
* s390-nat.c, s390-tdep.c, sentinel-frame.c, serial.c: Update.
* sh-tdep.c, sh3-rom.c, sh64-tdep.c, shnbsd-nat.c: Update.
* solib-aix5.c, solib-svr4.c, solib.c, source.c: Update.
* sparc-nat.c, stabsread.c, stack.c, symfile.c, symtab.c: Update.
* symtab.h, target.c, tracepoint.c, ui-file.c, ui-out.c: Update.
* utils.c, valops.c, valprint.c, vax-nat.c, vaxbsd-nat.c: Update.
* win32-nat.c, xcoffread.c, xstormy16-tdep.c: Update.
* cli/cli-cmds.c, cli/cli-logging.c, cli/cli-script.c: Update.
* cli/cli-setshow.c, mi/mi-cmd-break.c, mi/mi-cmds.c: Update.
* mi/mi-console.c, mi/mi-getopt.c, mi/mi-out.c: Update.
* tui/tui-file.c, tui/tui-interp.c: Update.
2005-02-11 18:13:55 +00:00
8a3fe4f86c
2005-02-10 Andrew Cagney <cagney@gnu.org>
...
Mark up all error and warning messages.
* ada-lang.c, amd64-tdep.c, arch-utils.c, breakpoint.c: Update.
* bsd-kvm.c, bsd-uthread.c, coff-solib.h, coffread.c: Update.
* core-aout.c, core-regset.c, corefile.c, corelow.c: Update.
* cp-abi.c, cp-support.c, cp-valprint.c, cris-tdep.c: Update.
* dbxread.c, demangle.c, doublest.c, dsrec.c: Update.
* dve3900-rom.c, dwarf2expr.c, dwarf2loc.c: Update.
* dwarf2read.c, dwarfread.c, elfread.c, eval.c: Update.
* event-top.c, exec.c, expprint.c, f-lang.c: Update.
* f-typeprint.c, f-valprint.c, fbsd-nat.c, findvar.c: Update.
* frame.c, frv-linux-tdep.c, gcore.c, gdbtypes.c: Update.
* gnu-nat.c, gnu-v2-abi.c, gnu-v3-abi.c, go32-nat.c: Update.
* hpacc-abi.c, hppa-hpux-nat.c, hppa-hpux-tdep.c: Update.
* hppa-linux-nat.c, hppa-linux-tdep.c, hppa-tdep.c: Update.
* hpread.c, hpux-thread.c, i386-linux-nat.c: Update.
* i386-linux-tdep.c, i386-tdep.c, i386bsd-nat.c: Update.
* i386gnu-nat.c, i387-tdep.c, ia64-linux-nat.c: Update.
* ia64-tdep.c, inf-child.c, inf-ptrace.c, inf-ttrace.c: Update.
* infcall.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* inftarg.c, interps.c, irix5-nat.c, jv-lang.c: Update.
* kod-cisco.c, kod.c, language.c, libunwind-frame.c: Update.
* linespec.c, linux-nat.c, linux-thread-db.c, m2-lang.c: Update.
* m32r-rom.c, m68hc11-tdep.c, m68k-tdep.c: Update.
* m68klinux-nat.c, macrocmd.c, macroexp.c, main.c: Update.
* maint.c, mdebugread.c, mem-break.c, memattr.c: Update.
* mips-linux-tdep.c, mips-tdep.c, mipsread.c, monitor.c: Update.
* nlmread.c, nto-procfs.c, objc-lang.c, objfiles.c: Update.
* observer.c, ocd.c, p-lang.c, p-typeprint.c: Update.
* p-valprint.c, pa64solib.c, parse.c, ppc-linux-tdep.c: Update.
* ppcnbsd-tdep.c, printcmd.c, procfs.c, remote-e7000.c: Update.
* remote-fileio.c, remote-m32r-sdi.c, remote-rdi.c: Update.
* remote-rdp.c, remote-sim.c, remote-st.c: Update.
* remote-utils.c, remote-utils.h, remote.c: Update.
* rom68k-rom.c, rs6000-nat.c, s390-tdep.c, scm-lang.c: Update.
* ser-e7kpc.c, ser-tcp.c, ser-unix.c, sh-tdep.c: Update.
* sh3-rom.c, shnbsd-tdep.c, sol-thread.c, solib-aix5.c: Update.
* solib-frv.c, solib-irix.c, solib-osf.c, solib-pa64.c: Update.
* solib-som.c, solib-sunos.c, solib-svr4.c, solib.c: Update.
* somread.c, somsolib.c, source.c, stabsread.c: Update.
* stack.c, std-regs.c, symfile-mem.c, symfile.c: Update.
* symmisc.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, trad-frame.c, typeprint.c, utils.c: Update.
* uw-thread.c, valarith.c, valops.c, valprint.c: Update.
* value.c, varobj.c, version.in, win32-nat.c, wince.c: Update.
* xcoffread.c, xcoffsolib.c, cli/cli-cmds.c: Update.
* cli/cli-decode.c, cli/cli-dump.c, cli/cli-logging.c: Update.
* cli/cli-script.c, cli/cli-setshow.c, mi/mi-cmd-break.c: Update.
* mi/mi-cmd-disas.c, mi/mi-cmd-env.c, mi/mi-cmd-file.c: Update.
* mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-getopt.c: Update.
* mi/mi-symbol-cmds.c, tui/tui-layout.c, tui/tui-stack.c: Update.
* tui/tui-win.c: Update.
2005-02-11 04:06:14 +00:00
335cca0d6e
2005-02-10 Andrew Cagney <cagney@gnu.org>
...
* cli/cli-decode.c (add_setshow_enum_cmd, add_setshow_cmd_full)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Replace
print string parameter with fprint_setshow function.
* command.h (fprint_setshow_ftype): Define. Update declarations.
* cli/cli-setshow.c (do_setshow_command): When fprint_setshow is
available, use that.
* cli/cli-decode.h (struct cmd_list_element): Add field
fprint_setshow.
* complaints.c (fprint_setshow_complaints): New function.
(_initialize_complaints): Pass to add_setshow_zinteger_cmd.
* hppa-tdep.c (_initialize_hppa_tdep): Replace "print" parameter
with NULL.
* mips-tdep.c (_initialize_mips_tdep): Ditto.
* m32r-rom.c (_initialize_m32r_rom): Ditto.
* cris-tdep.c (_initialize_cris_tdep): Ditto.
* arm-tdep.c (_initialize_arm_tdep): Ditto.
* remote-rdi.c (_initialize_remote_rdi): Ditto.
* alpha-tdep.c (_initialize_alpha_tdep): Ditto.
* dwarf2read.c (_initialize_dwarf2_read): Ditto.
* frame.c (_initialize_frame): Ditto.
* target.c (initialize_targets): Ditto.
* maint.c (_initialize_maint_cmds): Ditto.
* observer.c (_initialize_observer): Ditto.
* infcall.c (_initialize_infcall): Ditto.
* breakpoint.c (_initialize_breakpoint): Ditto.
* cli/cli-logging.c (_initialize_cli_logging): Ditto.
* remote.c (add_packet_config_cmd, _initialize_remote): Ditto.
2005-02-10 17:32:53 +00:00
5086187cf9
2005-02-07 Andrew Cagney <cagney@gnu.org>
...
* cp-valprint.c, c-valprint.c, infcall.c: Use value_contents or
value_contents_writeable, include note that there are problems.
* breakpoint.c, infcall.c: Use VALUE_LVAL.
2005-02-08 04:15:39 +00:00
17cf0ecde3
2005-02-07 Andrew Cagney <cagney@gnu.org>
...
* value.h (value_next): Declare.
* value.c (value_next): Define.
* breakpoint.c: Update.
2005-02-08 01:59:38 +00:00
88e3b34b7c
2005-02-07 Andrew Cagney <cagney@gnu.org>
...
* value.h (deprecated_set_value_modifiable)
(deprecated_value_modifiable): Declare.
* value.c (deprecated_set_value_modifiable): Define.
(deprecated_value_modifiable): Define.
* ada-lang.c, valops.c, breakpoint.c, tracepoint.c: Update.
2005-02-08 00:25:31 +00:00
0fd88904d9
2005-02-06 Andrew Cagney <cagney@gnu.org>
...
* value.c (value_contents, value_contents_writeable): New
functions.
* value.h (VALUE_CONTENTS): Delete macro.
(value_contents, value_contents_writeable): Declare.
* xstormy16-tdep.c, value.c, valops.c, valarith.c: Update.
* stack.c, sparc-tdep.c, sparc64-tdep.c, sh-tdep.c: Update.
* sh64-tdep.c, scm-valprint.c, scm-exp.c, s390-tdep.c: Update.
* rs6000-tdep.c, p-valprint.c, printcmd.c: Update.
* ppc-sysv-tdep.c, mips-tdep.c, mi/mi-main.c: Update.
* m88k-tdep.c, m68hc11-tdep.c, m32r-tdep.c: Update.
* jv-valprint.c, ia64-tdep.c, hppa-tdep.c: Update.
* hpacc-abi.c, f-valprint.c, frv-tdep.c, eval.c: Update.
* c-valprint.c, cris-tdep.c, cp-valprint.c: Update.
* cli/cli-dump.c, breakpoint.c, avr-tdep.c, arm-tdep.c: Update.
* arm-linux-tdep.c, amd64-tdep.c, alpha-tdep.c: Update.
* ada-valprint.c, ada-lang.c: Update.
2005-02-07 00:09:56 +00:00
d69fe07ead
2005-02-02 Andrew Cagney <cagney@gnu.org>
...
* value.h (value_lazy): Declare.
* varobj.c, value.c, valops.c, valarith.c, printcmd.c: Update.
* cp-valprint.c, breakpoint.c, ada-lang.c: Update.
2005-02-02 22:34:36 +00:00
315a522ef2
2005-01-19 Andrew Cagney <cagney@gnu.org>
...
* exceptions.h (deprecated_throw_reason): Rename throw_reason.
* exceptions.c (deprecated_throw_reason): Rename throw_reason.
* utils.c (internal_verror, quit): Update.
* remote-sds.c (interrupt_query): Update.
* remote-mips.c (mips_error, mips_kill): Update.
* remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Update.
* remote.c (interrupt_query): Update.
* ocd.c (interrupt_query): Update.
* nto-procfs.c (interrupt_query): Update.
* monitor.c (monitor_interrupt_query): Update.
* breakpoint.c (break_command_1): Update.
2005-01-19 21:15:44 +00:00
fa113d1a30
2005-01-18 Andrew Cagney <cagney@gnu.org>
...
* target.h (struct target_ops): Change return type of
to_insert_fork_catchpoint, to_insert_vfork_catchpoint and
to_insert_exec_catchpoint to void.
(child_insert_fork_catchpoint, child_insert_vfork_catchpoint)
(child_insert_exec_catchpoint): Change return type to void.
* target.c (update_current_target): Update.
(debug_to_insert_fork_catchpoint)
(debug_to_insert_vfork_catchpoint)
(debug_to_insert_exec_catchpoint): Update.
* inf-child.c (inf_child_insert_fork_catchpoint)
(inf_child_insert_vfork_catchpoint)
(inf_child_insert_exec_catchpoint): Update.
* breakpoint.c (insert_catchpoint): Update, do not throw an error.
* linux-nat.c (child_insert_fork_catchpoint)
(child_insert_vfork_catchpoint)
(child_insert_exec_catchpoint): Update.
* inftarg.c (child_insert_fork_catchpoint)
(child_insert_vfork_catchpoint,)
(child_insert_exec_catchpoint): Update.
2005-01-18 17:04:28 +00:00
1c3c7ee7fb
2005-01-14 Andrew Cagney <cagney@gnu.org>
...
* exceptions.h (catch_exceptions): Delete errstring parameter.
(catch_exceptions_with_msg): Ditto.
* exceptions.c (catch_exceptions_with_msg): Update.
(catch_exceptions): Update.
* symfile-mem.c (add_vsyscall_page): Update.
* frame.c (get_current_frame): Update.
* wrapper.c (gdb_value_struct_elt): Update.
* exceptions.c (catch_exceptions): Update.
* thread.c (gdb_list_thread_ids, gdb_thread_select): Update.
* breakpoint.c (gdb_breakpoint_query, gdb_breakpoint): Update.
* remote-fileio.c (remote_fileio_request): Update.
2005-01-14 23:27:14 +00:00
9cbc821d4e
2005-01-14 Andrew Cagney <cagney@gnu.org>
...
* exceptions.h (exception_fprintf): Declare.
(exception_print): Drop pre_print parameter.
* mi/mi-main.c (mi_execute_command): Update exception_print call.
* cli/cli-interp.c (safe_execute_command): Update exception_print
call.
* remote.c (remote_open_1): Instead of passing an error prefix to
catch_exceptions, use catch_exceptions and exception_fprintf.
(remote_start_remote): Change return type to void.
* breakpoint.c (insert_bp_location): Instead of passing an error
prefix to catch_exceptions, use catch_exceptions and
exception_fprintf.
(insert_catchpoint): Change return type to void.
(break_command_1): Update exception_print call.
* exceptions.c (exception_fprintf): New function.
(print_exception): New function.
(exception_print): Use print_exception.
2005-01-14 22:59:36 +00:00
05ff989b0b
2005-01-14 Andrew Cagney <cagney@gnu.org>
...
* linespec.c (symtab_from_filename, decode_variable): Use
throw_error instead of error_silent.
* breakpoint.c (do_captured_parse_breakpoint): Change return type
to void.
(break_command_1): Use catch_exception and check the error return
status.
* exceptions.c (throw_error): New function.
(throw_vsilent): Delete function.
* exceptions.h (throw_error): Declare.
(throw_vsilent): Delete declaration.
* utils.c (error_silent): Delete function.
* defs.h (error_silent): Delete declaration.
2005-01-14 20:24:20 +00:00
1272ad1410
2005-01-13 Michael Snyder <msnyder@redhat.com>
...
* breakpoint.c: Whitespace tweaks.
2005-01-13 23:35:54 +00:00
ce43223b29
2005-01-13 Andrew Cagney <cagney@gnu.org>
...
* breakpoint.c (gdb_breakpoint_query): Update, use
catch_exceptions_with_msg.
(do_captured_breakpoint): Add uiout parameter.
(gdb_breakpoint): Update, use catch_exceptions_with_msg.
* mi/mi-main.c (mi_cmd_thread_select): Pass mi_error_message to
gdb_thread_select. Return MI_CMD_ERROR instead of
MI_CMD_CAUGHT_ERROR.
(mi_cmd_thread_list_ids): Ditto for gdb_list_thread_ids.
(enum captured_mi_execute_command_actions): Delete
EXECUTE_COMMAND_DISPLAY_ERROR.
(captured_mi_execute_command): Delete code handling
MI_CMD_CAUGHT_ERROR.
(mi_execute_command): Don't check for
EXECUTE_COMMAND_DISPLAY_ERROR.
* mi/mi-cmd-break.c (breakpoint_notify): Update call to
gdb_breakpoint_query.
(mi_cmd_break_insert): Pass mi_error_message to gdb_breakpoint.
* mi/mi-cmds.h (enum mi_cmd_result): Delete MI_CMD_CAUGHT_ERROR.
* gdb.h (gdb_thread_select, gdb_list_thread_ids)
(gdb_breakpoint, gdb_breakpoint_query): Add error_message
parameter.
* thread.c (thread_command): Update call.
(gdb_thread_select, gdb_list_thread_ids): Update, call
catch_exceptions_with_msg.
2005-01-13 22:08:27 +00:00
2a78bfb53c
2005-01-12 Andrew Cagney <cagney@gnu.org>
...
* exceptions.h (throw_reason): Rename throw_exception.
(enum errors, struct exception): Define.
(catch_exception_ftype): Define.
(catch_exception, throw_exception): Declare.
* exceptions.c (throw_exception): Rewrite.
(throw_reason): New function.
(struct catcher, catcher_state_machine): Replace "reason" with
"exception", delete "gdberrmsg".
(catch_exception): New function.
(catcher_init): Replace "gdberrmsg" parameter with "exception".
(catch_errors, catch_exceptions_with_msg): Re-implement passing
exception to catcher_init.
* utils.c (error_silent, error_stream_1): Use throw_reason.
(internal_verror, quit): Ditto.
* breakpoint.c (insert_catchpoint, break_command_1): Ditto.
* remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Ditto.
* remote.c (remote_open_1, interrupt_query): Ditto.
2005-01-13 00:12:50 +00:00
60250e8b18
2005-01-12 Andrew Cagney <cagney@gnu.org>
...
* exceptions.h (enum return_reason, RETURN_MASK)
(RETURN_MASK_QUIT, RETURN_MASK_ERROR, RETURN_MASK_ALL)
(return_mask, throw_exception, catch_exceptions_ftype)
(catch_exceptions_with_msg, catch_errors_ftype, catch_errors)
(catch_command_errors_ftype, catch_command_errors): Move to
exceptions.h.
* exceptions.c, exceptions.h: New files.
* top.c: Do not include <setjmp.h>.
(SIGJMP_BUF, SIGSETJMP, SIGLONGJMP, catch_return)
(throw_exception, catcher, catch_exceptions)
(catch_exceptions_with_msg, struct catch_errors_args)
(do_catch_errors, catch_errors, struct captured_command_args)
(do_captured_command, catch_command_errors): Move to exceptions.c.
* wrapper.c, wince.c, win32-nat.c, utils.c: Include "exceptions.h".
* tui/tui-interp.c, top.c, thread.c, symmisc.c: Ditto.
* symfile-mem.c, stack.c, solib.c, rs6000-nat.c: Ditto.
* remote-sds.c, remote-mips.c, remote-fileio.c: Ditto.
* remote-e7000.c, objc-lang.c, ocd.c: Ditto.
* remote.c, nto-procfs.c, monitor.c, mi/mi-main.c: Ditto.
* main.c, m32r-rom.c, infrun.c, inf-loop.c: Ditto.
* hppa-hpux-tdep.c, frame.c, event-top.c, event-loop.c: Ditto.
* corelow.c, corefile.c, cli/cli-interp.c, breakpoint.c: Ditto.
* ada-valprint.c, ada-lang.c: Ditto.
* Makefile.in (HFILES_NO_SRCDIR, COMMON_OBS): Add exceptions.h and
exceptions.o. Update all dependencies.
2005-01-12 18:31:35 +00:00
3a63c4b7c3
* breakpoint.c (break_command_1): Always free err_msg before
...
returning when an exception was caught.
2005-01-04 13:31:46 +00:00
46905982ed
2004-11-30 Randolph Chung <tausq@debian.org>
...
* breakpoint.c (break_at_finish_command): Delete.
(break_at_finish_command_1): Delete.
(break_at_finish_at_depth_command): Delete.
(break_at_finish_at_depth_command_1): Delete.
(tbreak_at_finish_command): Delete.
* hppa-tdep.c (_initialize_hppa_tdep): Remove deprecated xbreak, tbreak
and bx commands.
2004-12-01 06:54:56 +00:00
df407dfe2e
2004-11-12 Andrew Cagney <cagney@gnu.org>
...
* value.h (VALUE_TYPE, VALUE_NEXT, VALUE_OFFSET, VALUE_BITSIZE)
(VALUE_BITPOS): Delete.
(value_type, value_offset, value_bitsize, value_bitpos): Declare.
* value.c (value_type, value_offset, value_bitpos)
(value_bitsize): New functions. Update references.
* arm-tdep.c, gnu-v3-abi.c, hpacc-abi.c, gnu-v2-abi.c: Update.
* f-valprint.c, cp-valprint.c, c-valprint.c: Update.
* ada-valprint.c, typeprint.c, scm-valprint.c, scm-exp.c: Update.
* p-valprint.c, jv-valprint.c, jv-lang.c, varobj.c: Update.
* objc-lang.c, ada-lang.c, std-regs.c, stack.c: Update.
* infcall.c, linespec.c, printcmd.c, valarith.c: Update.
* valops.c, eval.c, findvar.c, breakpoint.c: Update.
* tracepoint.c, ax-gdb.c, mi/mi-main.c, cli/cli-dump.c:
* rs6000-tdep.c, ppc-sysv-tdep.c: Update.
2004-11-12 21:45:08 +00:00
b04f3ab417
2004-10-29 Andrew Cagney <cagney@gnu.org>
...
* frame.h (get_selected_frame): Add message parameter.
* frame.c (get_selected_frame): Add and use message parameter.
* stack.c (current_frame_command, return_command, locals_info)
(catch_info, args_info, up_silently_base, down_silently_base): Use
get_selected_frame with an explicit message.
* thread.c, stack.c, sh-tdep.c, sh64-tdep.c: Update.
* remote-rdp.c, remote-mips.c, remote-e7000.c: Update.
* ocd.c, mi/mi-main.c, mi/mi-cmd-stack.c: Update.
* infrun.c, inflow.c, infcmd.c, frame.c: Update.
* findvar.c, eval.c, corelow.c, bsd-kvm.c: Update.
* breakpoint.c: Update.
2004-10-29 20:23:17 +00:00
4aa7a7f553
2004-10-08 Jeff Johnston <jjohnstn@redhat.com>
...
* target.h (to_stopped_data_address): Change prototype to
take a CORE_ADDR pointer and return an int.
* target.c (update_current_target): Change to_stopped_data_address
to match new prototype.
(debug_to_stopped_data_address): Change appropriately.
* breakpoint.c (bpstat_stop_status): Change call to
target_stopped_data_address to use new prototype.
* frv-tdep.c (frv_have_stopped_data_address): New function.
(frv_stopped_data_address): Change to new prototype and
functionality.
* ia64-linux-nat.c (ia64_stopped_data_address): Change to new
prototype and functionality.
(ia64_stopped_by_watchpoint): New function.
* i386-nat.c (i386_stopped_data_address): Change to new
prototype and functionality.
(i386_stopped_by_watchpoint): New function.
* remote.c (remote_stopped_data_address): Change to new prototype
and functionality.
* remote-m32r-sdi.c (m32r_stopped_data_address): Ditto.
* config/frv/tm-frv.h (frv_stopped_data_address): Change prototype.
(STOPPED_BY_WATCHPOINT): Change to use frv_have_stopped_data_address.
* config/i386/nm-i386.h (STOPPED_BY_WATCHPOINT): Change to use
new i386_stopped_by_watchpoint function.
(i386_stopped_by_watchpoint): New prototype.
(i386_stoppped_data_address): Change to new prototype.
* config/ia64/nm-linux.h (STOPPED_BY_WATCHPOINT): Change to use
new ia64_stopped_by_watchpoint function.
(ia64_stopped_by_watchpoint): New prototype.
(ia64_stopped_data_address): Ditto.
2004-10-08 17:30:48 +00:00
362646f517
2004-09-13 Andrew Cagney <cagney@gnu.org>
...
Eliminate event_loop_p, always has the value 1.
* defs.h (event_loop_p): Delete macro.
* breakpoint.c (until_break_command): Simplify.
* utils.c (prompt_for_continue): Simplify.
* tracepoint.c (read_actions): Simplify.
* top.c (throw_exception, execute_command, gdb_readline_wrapper)
(gdb_rl_operate_and_get_next, command_line_input, get_prompt)
(set_prompt, init_main): Simplify.
(init_signals, disconnect): Delete, unused.
* remote.c (remote_async_resume)
(extended_remote_async_create_inferior): Simplify.
* mi/mi-interp.c (mi_input): Delete, unused.
(mi_interpreter_resume, mi_command_loop): Simplify.
* interps.c (current_interp_command_loop): Simplify.
* infrun.c (proceed): Simplify.
* infcmd.c (run_command, continue_command, step_1, jump_command)
(until_command, advance_command, finish_command)
(interrupt_target_command): Simplify.
* event-top.c (gdb_setup_readline, gdb_disable_readline): Simplify.
2004-09-13 18:26:31 +00:00
bb599908a8
* language.c (local_hex_format_custom): Remove.
...
(local_hex_string): Rename to hex_string, use C format, and move to
utils.c
(local_hex_string_custom): Rename to hex_string_custom and change
interface. Now uses C format. Move to utils.c
(local_octal_format_custom): Remove.
(local_decimal_format_custom): Remove.
(unknown_language_defn): Remove language-specific number
formatting entries.
(auto_language_defn): Ditto.
(local_language_defn): Ditto.
* language.h (struct language_format_info): Delete declaration.
(struct language_defn): Remove language_format_info fields
la_binary_format, la_octal_format, la_decimal_format, la_hex_format.
(local_binary_format): Remove macro.
(local_binary_format_prefix): Remove macro.
(local_binary_format_specifier): Remove macro.
(local_binary_format_suffix): Remove macro.
(local_octal_format): Remove macro.
(local_octal_format_prefix): Remove macro.
(local_octal_format_specifier): Remove macro.
(local_octal_format_suffix): Remove macro.
(local_decimal_format): Remove macro.
(local_decimal_format_prefix): Remove macro.
(local_decimal_format_specifier): Remove macro.
(local_decimal_format_suffix): Remove macro.
(local_hex_format): Remove macro.
(local_hex_format_prefix): Remove macro.
(local_hex_format_specifier): Remove macro.
(local_hex_format_suffix): Remove macro.
(local_decimal_format_custom): Remove.
(local_octal_format_custom): Remove.
(local_hex_format_custom): Remove.
(local_hex_string): Rename to hex_string and move to defs.h.
(local_hex_string_custom): Rename to hex_string_custom, change
interface, and move to defs.h.
* utils.c: (int_string): New function.
(hex_string): New function (from language.c).
(hex_string_custom): New function (from language.c).
(octal2str): New function.
(decimal2str): Add width parameter.
(paddr_u): Use new decimal2str interface.
(paddr_d): Ditto.
* defs.h (hex_string): Declare.
(hex_string_custom): Declare.
(int_string): Declare.
* printcmd.c (print_scalar_formatted): Remove localized binary
formatting.
* valprint.c (print_longest): Use int_string.
(print_floating): Use C hex format.
(print_hex_chars): Ditto.
(print_binary_chars): Remove language-specific formatting.
(print_octal_chars): Use C octal format.
(print_decimal_chars): Delocalize format.
(print_decimal): Remove.
* ada-lang.c (ada_language_defn): Remove language-specific number
formatting entries.
* p-lang.c (pascal_language_defn): Ditto.
* c-lang.c (c_language_defn): Ditto.
(cplus_language_defn): Ditto.
(asm_language_defn): Ditto.
(minimal_language_defn): Ditto.
* f-lang.c (f_language_defn): Ditto.
* jv-lang.c (java_language_defn): Ditto.
* m2-lang.c (m2_language_defn): Ditto.
* scm-lang.c (scm_language_defn): Ditto.
* objc-lang.c (objc_language_defn): Ditto.
* memattr.c (mem_info_command): Use renamed hex_string_custom with
new interface.
* pa64solib.c (pa64_sharedlibrary_info_command): Ditto.
* ui-out.c (ui_out_field_core_addr): Ditto.
* breakpoint.c (breakpoint_adjustment_warning): Ditto.
* exec.c (print_section_info): Ditto.
* i387-tdep.c (print_i387_status_word): Ditto.
(print_i387_control_word): Ditto.
(i387_print_float_info): Ditto.
* maint.c (maint_print_section_info): Ditto.
* solib.c (info_sharedlibrary_command): Ditto.
* somsolib.c (som_sharedlibrary_info_command): Ditto.
* symtab.c (print_msymbol_info): Ditto.
* tracepoint.c (tracepoints_info): Ditto.
* solib-frv.c (lm_base): Ditto.
(frv_current_sos): Ditto.
(enable_break2): Ditto.
(enable_break): Ditto.
* dbxread.c (read_dbx_symtab): Use renamed hex_string.
(process_one_symbol): Ditto.
* infcmd.c (program_info): Ditto.
* mdebugread.c (parse_partial_symbols): Ditto.
* symfile.c (add_symbol_file_command): Ditto.
* cli/cli-cmds.c (edit_command): Ditto.
(list_command): Ditto.
* infcall.c (call_function_by_hand): Ditto.
* remote-vx.c (vx_run_files_info): Ditto.
(vx_wait): Ditto.
(vx_attach): Ditto.
(vx_detach): Ditto.
(vx_kill): Ditto.
* aix-thread.c (pdc_symbol_addrs): Ditto.
(pdc_read_regs): Ditto.
(pdc_write_regs): Ditto.
(pdc_read_data): Ditto.
(pdc_write_data): Ditto.
* d10v-tdep.c (display_trace): Ditto.
* rs6000-nat.c (find_toc_address): Ditto.
* aix-thread.c: Don't include language.h.
* buildsym.c: Ditto.
* dbxread.c: Ditto.
* mdebugread.c: Ditto.
* rs6000-nat.c: Ditto.
* buildsym.c (make_blockvector): Use renamed hex_string.
2004-09-11 10:24:53 +00:00
84acb35a5a
2004-09-01 Jeff Johnston <jjohnstn@redhat.com>
...
* observer.sh: Add struct so_list declaration.
* Makefile.in: Add dependencies on observer.h for solib.c and
breakpoint.c.
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): New
function.
(_initialize_breakpoint): Register
disable_breakpoints_in_unloaded_shlib as an observer of the
"solib unloaded" observation event.
(re_enable_breakpoints_in_shlibs): For bp_shlib_disabled breakpoints,
call decode_line_1 so unfound breakpoint errors are silent.
* solib.c (update_solib_list): When a solib is discovered to have
been unloaded by the program, notify all observers of the
"solib unloaded" observation event.
2004-09-01 18:00:29 +00:00
3b64bf9877
2004-07-28 Andrew Cagney <cagney@gnu.org>
...
* cli/cli-decode.c (add_setshow_zinteger_cmd)
(add_setshow_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_cmd_full): Add help_doc and
print parameters. Make string parameters constant.
* command.h: Update. Update copyright.
* remote.c (add_packet_config_cmd, _initialize_remote): Ditto.
* observer.c (_initialize_observer): Ditto.
* frame.c (_initialize_frame): Ditto.
* complaints.c (_initialize_complaints): Ditto.
* maint.c (_initialize_maint_cmds): Ditto.
* target.c (initialize_targets): Ditto.
* cli/cli-logging.c (_initialize_cli_logging): Ditto.
* infcall.c (_initialize_infcall): Ditto.
* arm-tdep.c (_initialize_arm_tdep): Ditto.
* m32r-rom.c (_initialize_m32r_rom): Ditto.
* remote-rdi.c (_initialize_remote_rdi): Ditto.
* d10v-tdep.c (_initialize_d10v_tdep): Ditto.
* mips-tdep.c (_initialize_mips_tdep): Ditto.
2004-07-28 17:26:27 +00:00
cb1a6d5f51
2004-07-26 Andrew Cagney <cagney@gnu.org>
...
* cli/cli-decode.c (deprecated_add_show_from_set): Deprecate.
* xcoffsolib.c (_initialize_xcoffsolib): Update.
* wince.c (_initialize_wince): Update.
* win32-nat.c (_initialize_win32_nat): Update.
* varobj.c (_initialize_varobj): Update.
* valops.c (_initialize_valops): Update.
* utils.c (initialize_utils, initialize_utils): Update.
* tui/tui-win.c (_initialize_tui_win): Update.
* top.c (init_main): Update.
* symfile.c (_initialize_symfile): Update.
* source.c (_initialize_source): Update.
* somsolib.c (_initialize_som_solib): Update.
* solib.c (_initialize_solib): Update.
* solib-frv.c (_initialize_frv_solib): Update.
* serial.c (_initialize_serial): Update.
* ser-go32.c (_initialize_ser_dos, _initialize_ser_dos): Update.
* remote.c (_initialize_remote, _initialize_remote): Update.
* remote-vx.c (_initialize_vx): Update.
* remote-utils.c (_initialize_sr_support): Update.
* remote-sds.c (_initialize_remote_sds): Update.
* remote-mips.c (_initialize_remote_mips): Update.
* remote-e7000.c (_initialize_remote_e7000): Update.
* proc-api.c (_initialize_proc_api): Update.
* printcmd.c: Update.
* parse.c (_initialize_parse): Update.
* pa64solib.c (_initialize_pa64_solib): Update.
* p-valprint.c (_initialize_pascal_valprint): Update.
* monitor.c (_initialize_remote_monitors): Update.
* mips-tdep.c (_initialize_mips_tdep): Update.
* mcore-tdep.c (_initialize_mcore_tdep): Update.
* maint.c (_initialize_maint_cmds): Update.
* lin-lwp.c (_initialize_lin_lwp): Update.
* language.c (_initialize_language): Update.
* kod.c (_initialize_kod): Update.
* infrun.c (set_schedlock_func, _initialize_infrun): Update.
* i386-tdep.c (_initialize_i386_tdep): Update.
* gdbtypes.c (build_gdbtypes, _initialize_gdbtypes): Update.
* gdbarch.sh: Update.
* gdbarch.c: Re-generate.
* gdb-events.sh: Update.
* gdb-events.c: Re-generate.
* frame.c (_initialize_frame): Update.
* exec.c: Update.
* demangle.c (_initialize_demangler): Update.
* dcache.c (_initialize_dcache): Update.
* cris-tdep.c (_initialize_cris_tdep, cris_version_update): Update.
* cp-valprint.c (_initialize_cp_valprint): Update.
* corefile.c (_initialize_core): Update.
* command.h: Update.
* cli/cli-decode.h: Update.
* cli/cli-cmds.c (init_cli_cmds): Update.
* charset.c (_initialize_charset): Update.
* breakpoint.c (_initialize_breakpoint): Update.
* arm-tdep.c (_initialize_arm_tdep_initialize_arm_tdep): Update.
* alpha-tdep.c (_initialize_alpha_tdep): Update.
* aix-thread.c (_initialize_aix_thread): Update.
2004-07-26 14:53:06 +00:00
1f602b35ff
2004-07-20 Andrew Cagney <cagney@gnu.org>
...
* breakpoint.c (deprecated_read_memory_nobpt): Rename
read_memory_nobpt.
* sparc-linux-tdep.c (sparc_linux_sigtramp_start): Update.
* s390-tdep.c (s390_readinstruction, s390_in_function_epilogue_p)
(s390_sigtramp_frame_sniffer): Update.
* mn10300-tdep.c (mn10300_analyze_prologue): Update.
* mipsnbsd-tdep.c (mipsnbsd_sigtramp_offset): Update.
* mips-tdep.c (mips_fetch_instruction, mips16_fetch_instruction)
(mips32_fetch_instruction): Update.
* mcore-tdep.c (get_insn): Update.
* m68klinux-tdep.c (m68k_linux_pc_in_sigtramp): Update.
* i386nbsd-tdep.c (i386nbsd_sigtramp_offset): Update.
* i386ly-tdep.c (i386lynx_saved_pc_after_call): Update.
* i386-linux-tdep.c (i386_linux_sigtramp_start)
(i386_linux_rt_sigtramp_start): Update.
* i386-linux-nat.c (child_resume): Update.
* hppa-tdep.c (skip_prologue_hard_way, hppa_frame_cache): Update.
* hppa-linux-tdep.c (insns_match_pattern): Update.
* gdbcore.h: Update.
* frv-tdep.c (frv_gdbarch_adjust_breakpoint_address): Update.
* frame.c (safe_frame_unwind_memory): Update.
* amd64-linux-tdep.c (amd64_linux_sigtramp_start): Update.
* alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Update.
* alpha-tdep.c (alpha_read_insn): Update.
2004-07-20 19:45:07 +00:00
b435e160dd
2004-06-26 Andrew Cagney <cagney@gnu.org>
...
* xcoffsolib.c (xcoff_solib_address): Replace xasprintf with
xstrprintf.
* varobj.c (varobj_gen_name, create_child, c_name_of_child)
(c_value_of_variable): Ditto.
* utils.c (internal_vproblem): Ditto.
* solib-aix5.c (build_so_list_from_mapfile): Ditto.
* remote.c (add_packet_config_cmd): Ditto.
* remote-rdp.c (rdp_set_command_line): Ditto.
* regcache.c (regcache_dump): Ditto.
* frv-tdep.c (new_variant, new_variant): Ditto.
* fbsd-proc.c (child_pid_to_exec_file): Ditto.
(fbsd_find_memory_regions): Ditto.
* breakpoint.c (create_thread_event_breakpoint)
(create_breakpoints): Ditto.
* aix-thread.c (aix_thread_pid_to_str): Ditto.
* ada-lang.c (is_package_name): Ditto. Also delete xmalloc call.
Index: doc/ChangeLog
2004-06-26 Andrew Cagney <cagney@gnu.org>
* gdbint.texinfo (Coding): Replace xasprintf with xstrprintf.
2004-06-28 23:59:29 +00:00
46587c4207
2004-06-22 Jeff Johnston <jjohnstn@redhat.com>
...
* infrun.c (handle_inferior_event): Initialize stopped_by_watchpoint
to -1.
* breakpoint.c (bpstat_stop_status): Move check for ignoring
untriggered watchpoints to a separate if clause. Update function
comment regarding STOPPED_BY_WATCHPOINT argument.
2004-06-22 19:46:40 +00:00
45b7523071
2004-06-07 Andrew Cagney <cagney@gnu.org>
...
* target.h (PC_REQUIRES_RUN_BEFORE_USE): Delete definition.
* config/pa/tm-hppa.h (DEPRECATED_PC_REQUIRES_RUN_BEFORE_USE):
Rename PC_REQUIRES_RUN_BEFORE_USE.
* breakpoint.c (breakpoint_sals_to_pc): Update. Wrap reference in
#ifdef.
2004-06-07 17:58:33 +00:00
00d4360e1c
* breakpoint.c (bpstat_stop_status): Add new argument
...
STOPPED_BY_WATCHPOINT. Use it instead of testing
target_stopped_data_address agaist 0 to check whether
or not we stopped due to a hardware watchpoint.
* breakpoint.h (bpstat_stop_status): Adapt prototype.
* infrun.c (handle_inferior_event): Call bpstat_stop_status
with new argument.
2004-05-13 16:39:11 +00:00
0ec5872bda
2004-05-08 Andrew Cagney <cagney@redhat.com>
...
* breakpoint.h (deprecated_frame_in_dummy): Delete declaration.
(struct frame_info): Delete opaque declaration.
* breakpoint.c (deprecated_frame_in_dummy): Delete function.
* frame.c (get_frame_type): Delete call.
2004-05-08 18:47:20 +00:00
0a5e7efe29
Preserve the ignore count when we resolve a pending breakpoint. Also add
...
a test for this to pending.exp.
2004-05-05 21:18:11 +00:00
7789d0fa82
2004-05-01 Andrew Cagney <cagney@redhat.com>
...
* breakpoint.c (insert_bp_location): Use get_frame_id, and
frame_find_by_id instead of frame_relative_level.
(do_enable_breakpoint): Ditto.
* thread.c: Update copyright.
(info_threads_command): Ditto, simplify.
2004-05-02 00:21:41 +00:00
fcf70625fc
2004-05-01 Andrew Cagney <cagney@redhat.com>
...
* gdbarch.sh (DEPRECATED_PC_IN_SIGTRAMP): Delete.
* gdbarch.h, gdbarch.c: Re-generate.
* shnbsd-tdep.c (shnbsd_init_abi): Do not set pc_in_sigtramp.
(shnbsd_pc_in_sigtramp): Delete.
* i386-interix-tdep.c (i386_interix_init_abi): Do not set
pc_in_sigtramp.
* hppa-hpux-tdep.c (hppa_hpux_init_abi): Do not set
pc_in_sigtramp.
* frame.h: Update comments.
* ppc-linux-tdep.c: Update comments.
* breakpoint.c (bpstat_what): Update comments.
Index: doc/ChangeLog
2004-05-01 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Delete
description of DEPRECATED_PC_IN_SIGTRAMP.
2004-05-01 16:52:30 +00:00
7270d8f229
2004-04-26 Orjan Friberg <orjanf@axis.com>
...
From Paul Koning <pkoning@equallogic.com>:
* breakpoint.c (free_valchain): New function.
(insert_bp_location, delete_breakpoint): Use free_valchain.
(remove_breakpoint): Do not remove the valchain.
(bpstat_stop_status): If not stopped by watchpoint, skip
watchpoints when generating stop status list.
* infrun.c (handle_inferior_event): Make
stepped_after_stopped_by_watchpoint a global variable.
* remote.c (remote_stopped_data_address): Return watch data
address rather than zero if stepped_after_stopped_by_watchpoint is
set.
2004-04-26 09:02:41 +00:00
9a4105ab85
2004-04-21 Andrew Cagney <cagney@redhat.com>
...
* annotate.h (deprecated_annotate_starting_hook)
(deprecated_annotate_stopped_hook)
(deprecated_annotate_exited_hook)
(deprecated_annotate_signal_hook)
(deprecated_annotate_signalled_hook): Deprecate.
* tracepoint.h (deprecated_create_tracepoint_hook)
(deprecated_delete_tracepoint_hook)
(deprecated_modify_tracepoint_hook)
(deprecated_trace_find_hook)
(deprecated_trace_start_stop_hook): Deprecate.
* target.h (deprecated_target_new_objfile_hook): Deprecate.
* remote.h (deprecated_target_resume_hook)
(deprecated_target_wait_loop_hook): Deprecate.
* gdbcore.h (deprecated_exec_file_display_hook)
(deprecated_file_changed_hook): Deprecate.
* frame.h (deprecated_selected_frame_level_changed_hook): Deprecate.
* defs.h (deprecated_modify_breakpoint_hook)
(deprecated_command_loop_hook, deprecated_show_load_progress)
(deprecated_print_frame_info_listing_hook)
(deprecated_query_hook, deprecated_warning_hook)
(deprecated_flush_hook, deprecated_create_breakpoint_hook)
(deprecated_delete_breakpoint_hook)
(deprecated_interactive_hook, deprecated_registers_changed_hook)
(deprecated_readline_begin_hook, deprecated_readline_hook)
(deprecated_readline_end_hook, deprecated_register_changed_hook)
(deprecated_memory_changed_hook, deprecated_init_ui_hook)
(deprecated_context_hook, deprecated_target_wait_hook)
(deprecated_attach_hook, deprecated_detach_hook)
(deprecated_call_command_hook, deprecated_set_hook)
(deprecated_error_hook, deprecated_error_begin_hook)
(deprecated_ui_load_progress_hook): Deprecate.
* valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update.
* tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update.
* target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update.
* remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update.
* main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update.
* exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update.
* cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update.
* annotate.c, aix-thread.c: Update.
2004-04-21 23:52:21 +00:00
f83f82bc15
2004-04-08 Andrew Cagney <cagney@redhat.com>
...
* breakpoint.h (deprecated_exception_catchpoints_are_fragile)
(deprecated_exception_support_initialized): Declare.
* hppa-hpux-tdep.c (initialize_hp_cxx_exception_support)
(initialize_hp_cxx_exception_support)
(child_enable_exception_callback): Update.
* breakpoint.c (deprecated_exception_catchpoints_are_fragile)
(deprecated_exception_support_initialized): Rename
deprecated_exception_catchpoints_are_fragile and
deprecated_exception_support_initialized.
(breakpoint_init_inferior, breakpoint_init_inferior): Update.
* symtab.c (deprecated_hp_som_som_object_present): Rename
hp_som_som_object_present.
* symtab.h (deprecated_hp_som_som_object_present): Declare.
* symfile.c (hp_som_som_object_present, RESET_HP_UX_GLOBALS):
Update. Delete extern declaration.
* valops.c (hp_som_som_object_present): Ditto.
* parse.c (deprecated_hp_som_som_object_present)
(parse_nested_classes_for_hpacc): Ditto.
* hpread.c (hp_som_som_object_present, hpread_expand_symtab): Ditto.
* hppa-hpux-tdep.c (hp_som_som_object_present)
(initialize_hp_cxx_exception_support): Ditto.
* eval.c (hp_som_som_object_present, evaluate_subexp_standard): Ditto.
* cp-valprint.c (hp_som_som_object_present)
(cp_print_class_method): Ditto.
* c-typeprint.c (hp_som_som_object_present):
(c_type_print_base): Ditto.
* c-exp.y (hp_som_som_object_present): Ditto.
2004-04-08 21:18:13 +00:00
f561f02630
2004-03-23 Andrew Cagney <cagney@redhat.com>
...
* gdbarch.sh (PC_IN_SIGTRAMP): Change to a function with
predicate, deprecate.
* gdbarch.h, gdbarch.c: Re-generate.
* alpha-linux-tdep.c (alpha_linux_init_abi): Update.
* alpha-osf1-tdep.c (alpha_osf1_init_abi): Update.
* alpha-tdep.c (alpha_sigtramp_frame_sniffer): Update.
* alphafbsd-tdep.c (alphafbsd_init_abi): Update.
* alphanbsd-tdep.c (alphanbsd_init_abi): Update.
* amd64-linux-tdep.c (amd64_linux_init_abi): Update.
* amd64-tdep.c (amd64_sigtramp_frame_sniffer): Update.
* amd64nbsd-tdep.c (amd64nbsd_init_abi): Update.
* amd64obsd-tdep.c (amd64obsd_init_abi): Update.
* arm-tdep.c (arm_sigtramp_unwind_sniffer): Update.
* blockframe.c (find_pc_partial_function): Update.
* breakpoint.c (bpstat_what): Update.
* frame.c (frame_type_from_pc, legacy_get_prev_frame): Update.
* frv-linux-tdep.c (frv_linux_init_abi): Update.
* frv-tdep.c (frv_sigtramp_frame_sniffer): Update.
* hppa-hpux-tdep.c (hppa_hpux_init_abi): Update.
* i386-interix-tdep.c (i386_interix_init_abi): Update.
* i386-linux-tdep.c (i386_linux_init_abi): Update.
* i386-nto-tdep.c (i386nto_init_abi): Update.
* i386-sol2-tdep.c (i386_sol2_init_abi): Update.
* i386-tdep.c (i386_sigtramp_frame_sniffer)
(i386_svr4_init_abi, i386_go32_init_abi, i386_gdbarch_init): Update.
* i386bsd-tdep.c (i386bsd_init_abi): Update.
* i386nbsd-tdep.c (i386nbsd_init_abi): Update.
* i386obsd-tdep.c (i386obsd_init_abi): Update.
* ia64-tdep.c (ia64_sigtramp_frame_sniffer): Update.
* infrun.c (pc_in_sigtramp): Update.
* m68k-tdep.c (m68k_sigtramp_frame_sniffer): Update.
* m68klinux-tdep.c (m68k_linux_init_abi): Update.
* mips-tdep.c (mips_gdbarch_init): Update.
* mipsnbsd-tdep.c (mipsnbsd_init_abi): Update.
* ppc-linux-tdep.c: Update comment.
* ppcnbsd-tdep.c (ppcnbsd_init_abi): Update.
* shnbsd-tdep.c (shnbsd_init_abi): Update.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Update.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Update.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Update.
* sparc64fbsd-tdep.c (sparc64fbsd_init_abi): Update.
* sparc64nbsd-tdep.c (sparc64nbsd_init_abi): Update.
* sparc64obsd-tdep.c (sparc64obsd_init_abi): Update.
* sparcnbsd-tdep.c (sparc32nbsd_init_abi): Update.
* sparcobsd-tdep.c (sparc32obsd_init_abi): Update.
Index: doc/ChangeLog
2004-03-23 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Deprecate
references to PC_IN_SIGTRAMP.
2004-03-23 14:48:00 +00:00
88f7da0511
* breakpoint.c (adjust_breakpoint_address): Don't adjust
...
breakpoint address for watchpoints or the catch eventpoints.
Add new paramter ``bptype''. Adjust all callers.
2004-03-19 20:49:43 +00:00
fe8bf7d723
* breakpoint.c (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete
...
unused macro definition. The definition in target.h (or perhaps
elsewhere) takes precedence.
2004-03-15 21:58:31 +00:00
6e1d7d6c23
2004-02-28 Andrew Cagney <cagney@redhat.com>
...
* breakpoint.c (_initialize_breakpoint): Use
"add_setshow_auto_boolean_cmd. Better word-wrap help messages.
Add help to show command.
2004-02-28 16:56:12 +00:00
fa8d40aba5
2004-02-26 Jeff Johnston <jjohnstn@redhat.com>
...
* breakpoint.c (pending_break_support): New setting variable.
(break_command_1): Account for pending_break_support setting
when creating pending breakpoints.
(set_breakpoint_cmd, show_breakpoint_cmd): New functions.
(_initialize_breakpoint): Add "set breakpoint pending" and
"show breakpoint pending" commands.
2004-02-26 23:46:47 +00:00
Marc Khouzam
Joel Brobecker
Aleksandar Ristovski
Vladimir Prus
Daniel Jacobowitz
Doug Evans
Markus Deuling
Luis Machado
Jim Blandy
Ulrich Weigand
Kazu Hirata
Pierre Muller
Michael Snyder
Nick Roberts
Kevin Buettner
Pedro Alves
Eli Zaretskii
Andrew Stubbs
Thiemo Seufer
Mark Kettenis
Wu Zhou
Bob Rossi
Andrew Cagney
Andreas Schwab
Randolph Chung
Jeff Johnston
Paul N. Hilfinger
Jim Ingham
Orjan Friberg