This adds a "self" argument to to_supports_btrace. Due to how one
implementation of this method is shared with gdbserver this required a
small change to gdbserver as well.
2014-02-19 Tom Tromey <tromey@redhat.com>
* common/linux-btrace.c (linux_supports_btrace): Add "ops"
argument.
* common/linux-btrace.h (linux_supports_btrace): Update.
* remote.c (remote_supports_btrace): Add "self" argument.
* target-delegates.c: Rebuild.
* target.c (target_supports_btrace): Remove.
* target.h (struct target_ops) <to_supports_btrace>: Add
target_ops argument.
(target_supports_btrace): New define.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <supports_btrace>: Add target_ops
argument.
(target_supports_btrace): Update.
This patch replaces some code in the record targets with target method
delegation.
record-full.c stores pointers to many target methods when the record
target is pushed. Then it later delegates some calls via these. This
is wrong because it violates the target stack contract. In particular
it is ok to unpush a target at any stratum, but record-full does not
keep track of this, so it could potentially call into an unpushed
target.
This patch fixes the problem by using the newly-introduced generic
approach to target delegation for the methods in question.
2014-02-19 Tom Tromey <tromey@redhat.com>
* record-full.c (record_full_beneath_to_resume_ops)
(record_full_beneath_to_resume, record_full_beneath_to_wait_ops)
(record_full_beneath_to_wait)
(record_full_beneath_to_store_registers_ops)
(record_full_beneath_to_store_registers)
(record_full_beneath_to_xfer_partial_ops)
(record_full_beneath_to_xfer_partial)
(record_full_beneath_to_insert_breakpoint_ops)
(record_full_beneath_to_insert_breakpoint)
(record_full_beneath_to_remove_breakpoint_ops)
(record_full_beneath_to_remove_breakpoint)
(record_full_beneath_to_stopped_by_watchpoint)
(record_full_beneath_to_stopped_data_address)
(record_full_beneath_to_async, tmp_to_resume_ops, tmp_to_resume)
(tmp_to_wait_ops, tmp_to_wait, tmp_to_store_registers_ops)
(tmp_to_store_registers, tmp_to_xfer_partial_ops)
(tmp_to_xfer_partial, tmp_to_instmp_to_insert_breakpoint_ops)
(tmp_to_insert_breakpoint, tmp_to_remove_breakpoint_ops)
(tmp_to_remove_breakpoint, tmp_to_stopped_by_watchpoint)
(tmp_to_stopped_data_address, tmp_to_async): Remove.
(record_full_open_1, record_full_open): Update. Use RECORD_IS_USED.
(record_full_resume, record_full_wait_1)
(record_full_stopped_by_watchpoint, record_full_stopped_data_address)
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint)
(record_full_async, record_full_core_xfer_partial): Use target
delegation.
* target-delegates.c: Rebuild.
* target.c (current_xfer_partial): Remove.
(update_current_target): Do not INHERIT or de_fault
to_insert_breakpoint, to_remove_breakpoint,
to_stopped_data_address, to_stopped_by_watchpoint, to_can_async_p,
to_is_async_p, to_async. Do not set to_xfer_partial field.
(default_xfer_partial): Simplify.
(current_xfer_partial): Remove.
(target_wait, target_resume): Simplify.
(find_default_can_async_p, find_default_is_async_p): Update.
(init_dummy_target): Don't set to_can_async_p, to_is_async_p,
to_xfer_partial, to_stopped_by_watchpoint,
to_stopped_data_address.
(target_store_registers): Simplify.
(forward_target_remove_breakpoint)
(forward_target_insert_breakpoint): Remove.
(target_remove_breakpoint, target_insert_breakpoint)
(debug_to_insert_breakpoint, debug_to_remove_breakpoint): Update.
* target.h (struct target_ops) <to_resume, to_wait,
to_store_registers, to_insert_breakpoint, to_remove_breakpoint,
to_stopped_by_watchpoint, to_stopped_data_address, to_can_async_p,
to_is_async_p, to_async, to_xfer_partial>: Add TARGET_DEFAULT
markup.
(forward_target_remove_breakpoint)
(forward_target_insert_breakpoint): Remove.
* record-btrace.c (record_btrace_remove_breakpoint): Delegate
directly.
(record_btrace_insert_breakpoint): Delegate directly.
This patch adds a new script, call make-target-delegates, which
auto-generates some target delegation code based on annotations in
target.h. This adds the new delegation macros, the new generated
file, and adds the necessary calls to the new generated functions to
target.c. It doesn't, however, add any actual annotations to the
target methods, leaving these for separate patches.
2014-02-19 Tom Tromey <tromey@redhat.com>
PR build/7701:
* target-delegates.c: New file.
* target.c: Include target-delegates.c.
(init_dummy_target): Call install_dummy_methods.
(complete_target_initialization): Call install_delegators.
* target.h (TARGET_DEFAULT_IGNORE, TARGET_DEFAULT_NORETURN)
(TARGET_DEFAULT_RETURN, TARGET_DEFAULT_FUNC): New defines.
* make-target-delegates: New file.
This patch adds find_target_at to determine whether a target appears
at a given stratum. This new function lets us clean up
find_record_target a bit, and is generally useful.
2014-02-19 Tom Tromey <tromey@redhat.com>
* record.c (find_record_target): Use find_target_at.
* target.c (find_target_at): New function.
* target.h (find_target_at): Declare.
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
Read branch trace data incrementally and extend the current trace rather than
discarding it and reading the entire trace buffer each time.
If the branch trace buffer overflowed, we can't extend the current trace so we
discard it and start anew by reading the entire branch trace buffer.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
Support delta reads.
(linux_disable_btrace): Change return type.
* common/linux-btrace.h (linux_read_btrace): Change parameters
and return type to allow error reporting. Update users.
(linux_disable_btrace): Change return type. Update users.
* common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
New.
(btrace_error): New.
(btrace_block) <begin>: Comment on BEGIN == 0.
* btrace.c (btrace_compute_ftrace): Start from the end of
the current trace.
(btrace_stitch_trace, btrace_clear_history): New.
(btrace_fetch): Read delta trace, return if replaying.
(btrace_clear): Move clear history code to btrace_clear_history.
(parse_xml_btrace): Throw an error if parsing failed.
* target.h (struct target_ops) <to_read_btrace>: Change parameters
and return type to allow error reporting.
(target_read_btrace): Change parameters and return type to allow
error reporting.
* target.c (target_read_btrace): Update.
* remote.c (remote_read_btrace): Support delta reads. Pass
errors on.
* NEWS: Announce it.
gdbserver/
* target.h (target_ops) <read_btrace>: Change parameters and
return type to allow error reporting.
* server.c (handle_qxfer_btrace): Support delta reads. Pass
trace reading errors on.
* linux-low.c (linux_low_read_btrace): Pass trace reading
errors on.
(linux_low_disable_btrace): New.
Allow targets to supply their own target-specific frame unwinders; one for
normal frames and one for tailcall frames. If a target-specific unwinder
is supplied, it will be chosen before any other unwinder.
The original patch has been split into this and the next two patches.
gdb/
2013-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* frame-unwind.c: Include target.h.
(frame_unwind_try_unwinder): New function with code from ...
(frame_unwind_find_by_frame): ... here. New variable
unwinder_from_target, call also target_get_unwinder)
(target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
* target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
* target.h (struct target_ops): New fields to_get_unwinder and
to_get_tailcall_unwinder.
(target_get_unwinder, target_get_tailcall_unwinder): New declarations.
The "record function-call-history" and "record instruction-history" commands
accept a range "begin, end". End is not included in both cases. Include it.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (record_btrace_insn_history_range): Include
end.
(record_btrace_insn_history_from): Adjust range.
(record_btrace_call_history_range): Include
end.
(record_btrace_call_history_from): Adjust range.
* NEWS: Announce changes.
testsuite/
* gdb.btrace/function_call_history.exp: Update tests.
* gdb.btrace/instruction_history.exp: Update tests.
doc/
* gdb.texinfo (Process Record and Replay): Update documentation.
This introduces async_callback_ftype. This is needed for
make-target-delegates to work properly, as it doesn't implement a real
parser. I think it's also an ok cleanup in its own right.
2014-01-15 Tom Tromey <tromey@redhat.com>
* target.h (async_callback_ftype): New typedef.
(struct target_ops) <to_async>: Use it.
Although we can tell upfront whether a remote target supports target
side commands, we can only tell whether the target supports that in
combination with a given breakpoint kind (software, hardware,
watchpoints, etc.) when we go and try to insert such a breakpoint kind
the first time. It's not desirable to make remote_insert_breakpoint
simply return -1 in this case, because if the breakpoint was set in a
shared library, insert_bp_location will assume that the breakpoint
insertion failed because the library wasn't mapped in.
insert_bp_location already handles errors/exceptions thrown from the
target_insert_xxx methods, exactly so the backend can tell the user
the detailed reason the insertion of hw breakpoints failed. But, in
the case of software breakpoints, it discards the detailed error
message.
So the patch makes insert_bp_location use the error's message for SW
breakpoints too, and, introduces a NOT_SUPPORTED_ERROR error code so
that insert_bp_location doesn't confuse the error for failure due to a
shared library disappearing.
The result is:
(gdb) c
Warning:
Cannot insert breakpoint 2: Target doesn't support breakpoints that have target side commands.
2014-01-09 Pedro Alves <palves@redhat.com>
Hui Zhu <hui@codesourcery.com>
PR gdb/16101
* breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
bp_err_string. Don't mark the location shlib_disabled if the
error thrown wasn't a generic or memory error. Catch errors
thrown while inserting breakpoints in overlayed code. Output
error message of software breakpoints.
* remote.c (remote_insert_breakpoint): If this breakpoint has
target-side commands but this stub doesn't support Z0 packets,
throw NOT_SUPPORTED_ERROR error.
* exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
* target.h (target_insert_breakpoint): Extend comment.
(target_insert_hw_breakpoint): Add comment.
This patch adds a typedef target_xfer_partial_ftype. When we change
the signature of xfer_partial functions (for example, adding a new
parameter), we don't have to modify all of their declarations.
This patch also updates the type of parameters of target_xfer_partial
from "void *" to "gdb_byte *".
gdb:
2013-12-18 Yao Qi <yao@codesourcery.com>
* target.h (target_xfer_partial_ftype): New typedef.
(target_xfer_partial): Update declaration.
* auxv.h (memory_xfer_auxv): Likewise.
* ia64-hpux-nat.c (super_xfer_partial): Likewise.
* ia64-linux-nat.c (super_xfer_partial): Likewise.
* linux-nat.c (super_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-full.c (record_full_beneath_to_xfer_partial):
(tmp_to_xfer_partial): Likewise.
* sparc-nat.c (inf_ptrace_xfer_partial): Likewise.
* target.c (default_xfer_partial): Likewise.
(current_xfer_partial): Likewise.
(target_xfer_partial): Change parameter type to 'gdb_byte *'.
Similar to stack cache, in this patch, we add
TARGET_OBJECT_CODE_MEMORY to read code from target and add a new
option "set code-cache on|off" to optimize code accesses by
using the target memory cache.
In V4:
- Remove "without affecting correctness" from NEWS and doc.
- Replace "ON" with "on" in doc.
- "access" -> "accesses".
In V3:
- Rename functions and variables.
- Update command help, doc and NEWS entry.
- Invalidate cache on option transitions, to align with
the behaviour of "stack-cache". Since cache invalidation is
transparent to users, users don't know option "stack-cache"
transitions cause code cache invalidation.
V2 was reviewed by Doug. There are some changes in V3, so I post it
here.
gdb:
2013-11-24 Yao Qi <yao@codesourcery.com>
* NEWS: Add note on new "set code-cache" option.
* target-dcache.c (code_cache_enabled_1): New variable.
(code_cache_enabled): New variable.
(show_code_cache, set_code_cache): New function.
(code_cache_enabled_p): New function.
(_initialize_target_dcache): Register command.
* target-dcache.h (code_cache_enabled_p): Declare.
* target.c (memory_xfer_partial_1):Handle
TARGET_OBJECT_CODE_MEMORY and code_cache_enabled.
(target_read_code): New function.
* target.h (enum target_object) <TARGET_OBJECT_CODE_MEMORY>:
New.
(target_read_code): Declare.
gdb/doc:
2013-11-24 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Caching Remote Data): Document new
"set/show stack-cache" option.
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
target_read_memory & friends build on top of target_read (thus on top
of the target_xfer machinery), but turn all errors to EIO, an errno
value. I think we'd better convert all these to return a
target_xfer_error too, like target_xfer_partial in a previous patch.
The patch starts by doing that.
(The patch does not add a enum target_xfer_error value for '0'/no
error, and likewise does not change the return type of several of
these functions to enum target_xfer_error, because different functions
return '0' with different semantics.)
I audited the tree for memory_error calls, EIO checks, places where
GDB hardcodes 'errno = EIO', and also for strerror calls. What I
found is that nowadays there's really no need to handle random errno
values, other than the EIOs gdb itself hardcodes. No doubt errno
values would appear in common code back in the day when
target_xfer_memory was the main interface to access memory, but
nowadays, any errno value that deprecated interface could return is
just absorved by default_xfer_partial:
else if (xfered == 0 && errno == 0)
/* "deprecated_xfer_memory" uses 0, cross checked against
ERRNO as one indication of an error. */
return 0;
else
return -1;
There are two places in the code that check for EIO and print "out of
bounds", and defer to strerror for other errors. That's
c-lang.c:c_get_string, and valprint.c.:val_print_string. AFAICT, the
strerror branch can never be reached nowadays, as the only error
possible to get at those points is EIO, given that it's GDB itself
that set that errno value (in target_read_memory, etc.).
breakpoint.c:insert_bp_location always prints the error val as if an
errno, returned by target_insert_breakpoint, with strerr. Now the
error here is either always EIO for mem-break.c targets (again
hardcoded by the target_read_memory/target_write_memory functions), so
this always prints "Input/output error" or similar (depending on
host), or, for remote targets (and probably others), this gem:
Error accessing memory address 0x80200400: Unknown error -1.
This patch makes these 3 places print the exact same error
memory_error prints. This changes output, but I think this is better,
for making memory error output consistent with other commands, and, it
means we have a central place to tweak for memory errors.
E.g., this changes:
Cannot insert breakpoint 1.
Error accessing memory address 0x5fc660: Input/output error.
to:
Cannot insert breakpoint 1.
Cannot access memory at address 0x5fc660
Which I find pretty much acceptable.
Surprisingly, only py-prettyprint.exp had a regression, for needing an
adjustment. I also grepped the testsuite for the old errors, and
found no other hits.
Now that errno values aren't used anywhere in any of these memory
access related routines, I made memory_error itself take a
target_xfer_error instead of an errno. The new
target_xfer_memory_error function added recently is no longer
necessary, and is thus removed.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-10-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location): Use memory_error_message to
build the memory error string.
* c-lang.c: Include "gdbcore.h".
(c_get_string): Use memory_error to throw error.
(target_xfer_memory_error): Delete.
(memory_error_message): New, factored out from
target_xfer_memory_error.
(memory_error): Change parameter type to target_xfer_error.
Rewrite.
(read_memory): Use memory_error instead of
target_xfer_memory_error.
* gdbcore.h: Include "target.h".
(memory_error): Change parameter type to target_xfer_error.
(memory_error_message): Declare function.
* target.c (target_read_memory, target_read_stack)
(target_write_memory, target_write_raw_memory): Return
TARGET_XFER_E_IO on error. Adjust comments.
(get_target_memory): Pass TARGET_XFER_E_IO to memory_error,
instead of EIO.
* target.h (target_read, target_insert_breakpoint)
(target_remove_breakpoint): Adjust comments.
* valprint.c (partial_memory_read): Rename parameter, and adjust
comment.
(val_print_string): Use memory_error_message to build the memory
error string.
gdb/testsuite/
2013-10-09 Pedro Alves <palves@redhat.com>
* gdb.python/py-prettyprint.exp (run_lang_tests): Adjust expected
output.
detach_fork.
* inf-ptrace.c (inf_ptrace_follow_fork): Likewise.
* inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
* inferior.h (detach_fork): Remove.
* infrun.c (detach_fork): Adjust comment and make it
static.
(follow_fork): Pass detach_fork parameter to
target_follow_fork.
* linux-nat.c (linux_child_follow_fork): New parameter
detach_fork.
* target.c (target_follow_fork): New parameter detach_fork.
Pass detach_fork as parameter and print its value.
* target.h (struct target_ops) <to_follow_fork>: New int
parameter.
(target_follow_fork): New parameter detach_fork.
In entry-values.exp, we have a test where the entry value of 'j' is
unavailable, so it is expected that printing j@entry yields
"<unavailable>". However, the actual output is:
(gdb) frame
#0 0x0000000000400540 in foo (i=0, i@entry=2, j=2, j@entry=<error reading variable: Cannot access memory at address 0x6009e8>)
The error is thrown here:
#0 throw_it (reason=RETURN_ERROR, error=MEMORY_ERROR, fmt=0x8cd550 "Cannot access memory at address %s", ap=0x7fffffffc8e8) at ../../src/gdb/exceptions.c:373
#1 0x00000000005e2f9c in throw_error (error=MEMORY_ERROR, fmt=0x8cd550 "Cannot access memory at address %s") at ../../src/gdb/exceptions.c:422
#2 0x0000000000673a5f in memory_error (status=5, memaddr=6293992) at ../../src/gdb/corefile.c:204
#3 0x0000000000673aea in read_memory (memaddr=6293992, myaddr=0x7fffffffca60 "\200\316\377\377\377\177", len=4) at ../../src/gdb/corefile.c:223
#4 0x00000000006784d1 in dwarf_expr_read_mem (baton=0x7fffffffcd50, buf=0x7fffffffca60 "\200\316\377\377\377\177", addr=6293992, len=4) at ../../src/gdb/dwarf2loc.c:334
#5 0x000000000067645e in execute_stack_op (ctx=0x1409480, op_ptr=0x7fffffffce87 "\237<\005@", op_end=0x7fffffffce88 "<\005@") at ../../src/gdb/dwarf2expr.c:1045
#6 0x0000000000674e29 in dwarf_expr_eval (ctx=0x1409480, addr=0x7fffffffce80 "\003\350\t`", len=8) at ../../src/gdb/dwarf2expr.c:364
#7 0x000000000067c5b2 in dwarf2_evaluate_loc_desc_full (type=0x10876d0, frame=0xd8ecc0, data=0x7fffffffce80 "\003\350\t`", size=8, per_cu=0xf24c40, byte_offset=0)
at ../../src/gdb/dwarf2loc.c:2236
#8 0x000000000067cc65 in dwarf2_evaluate_loc_desc (type=0x10876d0, frame=0xd8ecc0, data=0x7fffffffce80 "\003\350\t`", size=8, per_cu=0xf24c40)
at ../../src/gdb/dwarf2loc.c:2407
#9 0x000000000067a5d4 in dwarf_entry_parameter_to_value (parameter=0x13a7960, deref_size=18446744073709551615, type=0x10876d0, caller_frame=0xd8ecc0, per_cu=0xf24c40)
at ../../src/gdb/dwarf2loc.c:1160
#10 0x000000000067a962 in value_of_dwarf_reg_entry (type=0x10876d0, frame=0xd8de70, kind=CALL_SITE_PARAMETER_DWARF_REG, kind_u=...) at ../../src/gdb/dwarf2loc.c:1310
#11 0x000000000067aaca in value_of_dwarf_block_entry (type=0x10876d0, frame=0xd8de70, block=0xf1c2d4 "Q", block_len=1) at ../../src/gdb/dwarf2loc.c:1363
#12 0x000000000067e7c9 in locexpr_read_variable_at_entry (symbol=0x13a7540, frame=0xd8de70) at ../../src/gdb/dwarf2loc.c:3326
#13 0x00000000005daab6 in read_frame_arg (sym=0x13a7540, frame=0xd8de70, argp=0x7fffffffd0e0, entryargp=0x7fffffffd100) at ../../src/gdb/stack.c:362
#14 0x00000000005db384 in print_frame_args (func=0x13a7470, frame=0xd8de70, num=-1, stream=0xea3890) at ../../src/gdb/stack.c:669
#15 0x00000000005dc338 in print_frame (frame=0xd8de70, print_level=1, print_what=SRC_AND_LOC, print_args=1, sal=...) at ../../src/gdb/stack.c:1199
#16 0x00000000005db8ee in print_frame_info (frame=0xd8de70, print_level=1, print_what=SRC_AND_LOC, print_args=1) at ../../src/gdb/stack.c:851
#17 0x00000000005da2bb in print_stack_frame (frame=0xd8de70, print_level=1, print_what=SRC_AND_LOC) at ../../src/gdb/stack.c:169
#18 0x00000000005de236 in frame_command (level_exp=0x0, from_tty=1) at ../../src/gdb/stack.c:2265
dwarf2_evaluate_loc_desc_full (frame #7) knows to handle
NOT_AVAILABLE_ERROR errors, but read_memory always throws
a generic error.
Presently, only the value machinery knows to handle unavailable
memory. We need to push the awareness down to the target_xfer layer,
making it return a finer grained error indication. We can only return
a generic -1 nowadays, which leaves the upper layers with no clue on
why the xfer failed. Use target_xfer_partial directly, rather than
propagating the error through target_read_memory so as to get a better
address to display in the error message.
(target_read_memory & friends build on top of target_read (thus the
target_xfer machinery), but turn all errors to EIO, an errno value. I
think this is a mistake, and we'd better convert all these to return a
target_xfer_error too, but that can be done separately. I looked
around a bit over memory_error calls, and the need to handle random
errno values, other than the EIOs gdb itself hardcodes, probably comes
(only) from deprecated_xfer_memory, which uses errno for error
indication, but I didn't look exhaustively. We should really get rid
of deprecated_xfer_memory and of passing down errno values as error
indication in target_read & friends methods).
Tested on x86_64 Fedora 17, native and gdbserver. Fixes the test in
the PR, which will be added to the testsuite later.
gdb/
2013-08-22 Pedro Alves <palves@redhat.com>
PR gdb/15871
* corefile.c (target_xfer_memory_error): New function.
(memory_error): Defer EIO to target_memory_error.
(read_memory): Use target_xfer_partial, and handle finer-grained
target xfer errors.
* target.c (target_xfer_error_to_string): New function.
(memory_xfer_partial_1): If memory is known to be
unavailable, return TARGET_XFER_E_UNAVAILABLE instead of -1.
(target_xfer_partial): Make extern.
* target.h (enum target_xfer_error): New enum.
(target_xfer_error_to_string): Declare function.
(target_xfer_partial): Declare function.
(struct target_ops) <xfer_partial>: Adjust describing comment.
* Makefile.in (SFILES): Remove common/target-common.c and
add target/waitstatus.c.
(HFILES_NO_SRCDIR): Remove common/target-common.h and add
target/resume.h, target/wait.h and target/waitstatus.h.
(COMMON_OBS): Remove target-common.o and add
waitstatus.o.
(target-common.o): Remove.
(waitstatus.o): New target object file.
* common/target-common.c: Move contents to
target/waitstatus.c and remove.
* common/target-common.h: Move contents to other files and
remove.
(enum resume_kind: Move to target/resume.h.
(TARGET_WNOHANG): Move to target/wait.h.
(enum target_waitkind): Move to target/waitstatus.h.
(struct target_waitstatus): Likewise.
* target.h: Do not include target-common.h and
include target/resume.h, target/wait.h and
target/waitstatus.h.
* target/resume.h: New file.
* target/wait.h: New file.
* target/waitstatus.h: New file.
* target/waitstatus.c: New file.
gdb/gdbserver/
* Makefile.in (INCLUDE_CFLAGS): Include -I$(srcdir)/../.
(SFILES): Remove $(srcdir)/common/target-common.c and
add $(srcdir)/target/waitstatus.c.
(OBS): Remove target-common.o and add waitstatus.o.
(server_h): Remove $(srcdir)/../common/target-common.h and
add $(srcdir)/../target/resume.h, $(srcdir)/../target/wait.h
and $(srcdir)/../target/waitstatus.h.
(target-common.o): Remove.
(waitstatus.o): New target object file.
* target.h: Do not include target-common.h and
include target/resume.h, target/wait.h and
target/waitstatus.h.
This patch fixes the target double-close problem (PR remote/15266),
and in the process removes pop_target entire (PR remote/15256).
The first issue is that pop_target calls target_close. However, it
then calls unpush_target, which also calls target_close. This means
targets must be able to be closed twice. Not only is this strange,
but it also directly contradicts the contract of to_xclose targets.
(We currently have just a single such target, and it is never pushed;
but I plan to add more, and so this latent bug is triggered.)
The second issue is that it seems to me that calling pop_target is
often unsafe. This is what cropped up in 15256, where the remote
target assumed that it could pop_target -- but there was another
target higher on the stack, leading to confusion.
But, it is always just as easy to call unpush_target as it is to call
pop_target; and it is also safer. So, removing pop_target seemed like
an improvement.
Finally, this adds an assertion to target_close to ensure that no
currently-pushed target can be closed.
Built and regtested on x86-64 Fedora 18; both natively and using the
native-gdbserver board file.
PR remote/15256, PR remote/15266:
* bfd-target.c (target_bfd_reopen): Initialize to_magic.
* monitor.c (monitor_detach): Use unpush_target.
* remote-m32r-sdi.c (m32r_detach): Use unpush_target.
* remote-mips.c (mips_detach): Use unpush_target. Don't
call mips_close.
* remote-sim.c (gdbsim_detach): Use unpush_target.
* target.c (pop_target): Remove.
(pop_all_targets_above): Don't call target_close.
(target_close): Assert that the target is unpushed.
* target.h (pop_target): Don't declare.
* tracepoint.c (tfile_open): Use unpush_target.
Right now, "help target" will include this line:
target multi-thread -- Threads and pthreads support
However, it doesn't make sense to invoke "target multi-thread".
This patch fixes the problem by not registering the multi-thread
target. add_target does some needed initialization of the target_ops,
so I broke this out into a new function.
It isn't clear to me whether this patch requires a test case or not.
I'm not sure whether there are other unregistered targets; but if
there are, it seems unlikely that we test for their absence from the
help.
Built and regtested on x86-64 Fedora 18.
* linux-thread-db.c (init_thread_db_ops): Call
complete_target_initialization.
(_initialize_thread_db): Don't call add_target.
* target.c (complete_target_initialization): New function.
(add_target_with_completer): Call it.
* target.h (complete_target_initialization): Declare.
* target.h (target_ops): New field
"to_augmented_libraries_svr4_read".
(target_augmented_libraries_svr4_read): New macro.
* target.c (update_current_target): Handle
to_augmented_libraries_svr4_read.
* remote.c (remote_state): New field
"augmented_libraries_svr4_read".
(remote_augmented_libraries_svr4_read_feature): New function.
(remote_protocol_features): Add entry for
"augmented-libraries-svr4-read".
(remote_augmented_libraries_svr4_read): New function.
(init_remote_ops): Initialize
remote_ops.to_augmented_libraries_svr4_read.
More consistent with the name of other similar object names.
gdb/ChangeLog:
* target.h (enum target_object) [TARGET_OBJECT_LIBRARIES_AIX]:
Renames TARGET_OBJECT_AIX_LIBRARIES.
* rs6000-nat.c: Replace TARGET_OBJECT_AIX_LIBRARIES with
TARGET_OBJECT_LIBRARIES_AIX throughout.
* solib-aix.c: Likwise.
* remote.c (remote_trace_find): Change type of parameters 'addr1'
and 'addr2' to CORE_ADDR.
* target.c (update_current_target): Update.
* target.h (struct target_ops) <to_trace_find>: Change parameter
type to CORE_ADDR.
* tracepoint.c (tfind_1): Change type of parameters 'addr1' and
'addr2' to CORE_ADDR.
(tfile_trace_find): Likewise.
(tfile_get_traceframe_address): Change return type to CORE_ADDR.
Change local variable 'addr' to type CORE_ADDR.
* tracepoint.h (tfind_1): Update declaration.
2013-03-29 Yao Qi <yao@codesourcery.com>
* corelow.c: Include "completer.h".
(_initialize_corelow): Call add_target_with_completer with
argument 'filename_completer'.
* tracepoint.c: Likewise.
* exec.c (_initialize_exec): Likewise.
* target.c (add_target): Rename to ...
(add_target_with_completer): ... this. Call set_cmd_completer
if parameter completer is not NULL.
(add_target): New.
* target.h: Include "command.h".
(add_target_with_completer): Declare it.
gdb/testsuite:
2013-03-29 Yao Qi <yao@codesourcery.com>
* gdb.base/completion.exp: Test completion of commands
"target core", "target tfile" and "target exec".
* gdb.trace/tfile.exp: Test completion of command
"target tfile".
This command provides a quick high-level overview over the recorded execution
log at function granularity without having to reverse-step.
gdb/
* target.c (target_call_history, target_call_history_from,
target_call_history_range): New.
* target.h (target_ops) <to_call_history, to_call_history_from,
to_call_history_range>: New fields.
(target_call_history, target_call_history_from,
target_call_history_range): New declaration.
* record.c (get_call_history_modifiers, cmd_record_call_history,
record_call_history_size): New.
(_initialize_record): Add the "record function-call-history" command.
Add "set/show record function-call-history-size" commands.
* record.h (record_print_flag): New.
between different record targets.
gdb/
* record.h (record_disconnect): New.
(record_detach): New.
(record_mourn_inferior): New.
(record_kill): New.
* record-full.c (record_disconnect, record_detach,
record_mourn_inferior, record_kill): Move to...
* record.c: ...here.
(DEBUG): New.
(record_stop): New.
(record_unpush): New.
(cmd_record_stop): Call record_stop. Replace unpush_target
call with record_unpush call.
(record_disconnect, record_detach): Assert that the target
is of record stratum. Call record_unpush, record_stop, and
DEBUG.
(record_mourn_inferior, record_kill): Assert that the target
is of record stratum. Call record_unpush and DEBUG.
We define the following packets:
Qbtrace:bts enable branch tracing for the current thread
returns "OK" or "Enn"
Qbtrace:off disable branch tracing for the current thread
returns "OK" or "Enn"
qXfer:btrace:read read the full branch trace data for the current thread
gdb/
* target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
* remote.c: Include btrace.h.
(struct btrace_target_info): New struct.
(remote_supports_btrace): New function.
(send_Qbtrace): New function.
(remote_enable_btrace): New function.
(remote_disable_btrace): New function.
(remote_teardown_btrace): New function.
(remote_read_btrace): New function.
(init_remote_ops): Add btrace ops.
(enum <unnamed>): Add btrace packets.
(struct protocol_feature remote_protocol_features[]): Add btrace packets.
(_initialize_remote): Add packet configuration for branch tracing.
gdbserver/
* target.h (struct target_ops): Add btrace ops.
(target_supports_btrace): New macro.
(target_enable_btrace): New macro.
(target_disable_btrace): New macro.
(target_read_btrace): New macro.
* gdbthread.h (struct thread_info): Add btrace field.
* server.c: Include btrace-common.h.
(handle_btrace_general_set): New function.
(handle_btrace_enable): New function.
(handle_btrace_disable): New function.
(handle_general_set): Call handle_btrace_general_set.
(handle_qxfer_btrace): New function.
(struct qxfer qxfer_packets[]): Add btrace entry.
* inferiors.c (remove_thread): Disable btrace.
* linux-low: Include linux-btrace.h.
(linux_low_enable_btrace): New function.
(linux_low_read_btrace): New function.
(linux_target_ops): Add btrace ops.
* configure.srv (i[34567]86-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
(x86_64-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
* configure.ac: Define HAVE_LINUX_BTRACE.
* config.in: Regenerated.
* configure: Regenerated.
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention set and show trace-buffer-size commands.
Mention new packet.
* target.h (struct target_ops): New method
to_set_trace_buffer_size.
(target_set_trace_buffer_size): New macro.
* target.c (update_current_target): Set up new method.
* tracepoint.c (trace_buffer_size): New global.
(start_tracing): Send it to the target.
(set_trace_buffer_size): New function.
(_initialize_tracepoint): Add new setshow for trace-buffer-size.
* remote.c (remote_set_trace_buffer_size): New function.
(_initialize_remote): Use it.
(QTBuffer:size) New remote command.
(PACKET_QTBuffer_size): New enum.
(remote_protocol_features): Add an entry for
PACKET_QTBuffer_size.
gdb/gdbserver/
* tracepoint.c (trace_buffer_size): New global.
(DEFAULT_TRACE_BUFFER_SIZE): New define.
(init_trace_buffer): Change to one-argument function. Allocate
trace buffer memory.
(handle_tracepoint_general_set): Call cmd_bigqtbuffer_size to
handle QTBuffer:size packet.
(cmd_bigqtbuffer_size): New function.
(initialize_tracepoint): Call init_trace_buffer with
DEFAULT_TRACE_BUFFER_SIZE.
* server.c (handle_query): Add QTBuffer:size in the
supported packets.
gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
trace-buffer-size set and show commands.
(Tracepoint Packets): Document QTBuffer:size.
(General Query Packets): Document QTBuffer:size.
gdb/testsuite/
* gdb.trace/trace-buffer-size.exp: New file.
* gdb.trace/trace-buffer-size.c: New file.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_THREADS): New macro.
(thread_list): Declare.
* infrun.c (handle_inferior_event) <spurious signal>: Don't keep
going, but instead fall through to the stepping handling.
* linux-nat.c (resume_lwp): New parameter 'signo'. Resume with
the passed in signal. Adjust debug output.
(resume_callback): Rename to ...
(linux_nat_resume_callback): ... this. Pass the thread's last
stop signal, if in "pass" state.
(linux_nat_resume): Adjust to rename.
(stop_wait_callback): New assertion. Don't respawn signals;
instead let the LWP remain with SIGNALLED set.
(linux_nat_wait_1): Remove flushing of pending SIGSTOPs.
* remote.c (append_pending_thread_resumptions): New.
(remote_vcont_resume): Call it.
* target.h (target_resume): Extend comment.
gdb/testsuite/
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.threads/siginfo-threads.exp: New file.
* gdb.threads/siginfo-threads.c: New file.
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.
* symfile-mem.c: Change gdb_static_assert to ssize_t.
(target_read_memory_bfd): Cast gdb_assert LEN to ssize_t.
* target.c (target_read_memory): Change LEN to ssize_t.
* target.h (target_read_memory): Change LEN to ssize_t.
* bfd-in.h (bfd_elf_bfd_from_remote_memory): Make LEN argument
of target_read_memory as size_t.
* bfd-in2.h: Regenerate.
* elf-bfd.h (elf_backend_bfd_from_remote_memory): Make LEN
argument of target_read_memory as size_t.
(_bfd_elf32_bfd_from_remote_memory): Likewise.
(_bfd_elf64_bfd_from_remote_memory): Likewise.
* elf.c (bfd_elf_bfd_from_remote_memory): Likewise.
* elfcode.h (NAME(_bfd_elf,bfd_from_remote_memory)): Likewise.
gdb/
* target.c (target_read_memory): Make LEN argument as size_t.
* target.h (target_read_memory): Likewise.
* remote.c (remote_supports_cond_breakpoints): New forward
declaration.
(remote_add_target_side_condition): New function.
(remote_insert_breakpoint): Add target-side breakpoint
conditional if supported.
(remote_insert_hw_breakpoint): Likewise.
(init_remote_ops): Set to_supports_evaluation_of_breakpoint_conditions
hook.
* target.c (update_current_target): Inherit
to_supports_evaluation_of_breakpoint_conditions.
Default to_supports_evaluation_of_breakpoint_conditions to return_zero.
* target.h (struct target_ops)
<to_supports_evaluation_of_breakpoint_conditions>: New field.
(target_supports_evaluation_of_breakpoint_conditions): New #define.
* breakpoint.c (get_first_locp_gte_addr): New forward declaration.
(condition_evaluation_both, condition_evaluation_auto,
condition_evaluation_host, condition_evaluation_target,
condition_evaluation_enums, condition_evaluation_mode_1,
condition_evaluation_mode): New static globals.
(translate_condition_evaluation_mode): New function.
(breakpoint_condition_evaluation_mode): New function.
(gdb_evaluates_breakpoint_condition_p): New function.
(ALL_BP_LOCATIONS_AT_ADDR): New helper macro.
(mark_breakpoint_modified): New function.
(mark_breakpoint_location_modified): New function.
(set_condition_evaluation_mode): New function.
(show_condition_evaluation_mode): New function.
(bp_location_compare_addrs): New function.
(get_first_location_gte_addr): New helper function.
(set_breakpoint_condition): Free condition bytecode if locations
has become unconditional. Call mark_breakpoint_modified (...).
(condition_command): Call update_global_location_list (1) for
breakpoints.
(breakpoint_xfer_memory): Use is_breakpoint (...).
(is_breakpoint): New function.
(parse_cond_to_aexpr): New function.
(build_target_condition_list): New function.
(insert_bp_location): Handle target-side conditional
breakpoints and call build_target_condition_list (...).
(update_inserted_breakpoint_locations): New function.
(insert_breakpoint_locations): Handle target-side conditional
breakpoints.
(bpstat_check_breakpoint_conditions): Add comment.
(bp_condition_evaluator): New function.
(bp_location_condition_evaluator): New function.
(print_breakpoint_location): Print information on where the condition
will be evaluated.
(print_one_breakpoint_location): Likewise.
(init_bp_location): Call mark_breakpoint_location_modified (...) for
breakpoint location.
(force_breakpoint_reinsertion): New functions.
(update_global_location_list): Handle target-side breakpoint
conditions.
Reinsert locations that are already inserted if conditions have
changed.
(bp_location_dtor): Free agent expression bytecode.
(disable_breakpoint): Call mark_breakpoint_modified (...).
Call update_global_location_list (...) with parameter 1 for breakpoints.
(disable_command): Call mark_breakpoint_location_modified (...).
Call update_global_location_list (...) with parameter 1 for breakpoints.
(enable_breakpoint_disp): Call mark_breakpoint_modified (...).
(enable_command): mark_breakpoint_location_modified (...).
(_initialize_breakpoint): Update documentation and add
condition-evaluation breakpoint subcommand.
* breakpoint.h: Include ax.h.
(condition_list): New data structure.
(condition_status): New enum.
(bp_target_info) <cond_list>: New field.
(bp_location) <condition_changed, cond_bytecode>: New fields.
(is_breakpoint): New prototype.
* breakpoint.h (struct tracepoint): New field traceframe_usage.
* breakpoint.c (print_one_breakpoint_location): Identify
tracepoints as such when reporting hit counts, report
trace buffer usage.
(create_tracepoint_from_upload): Copy status info.
* tracepoint.h (struct trace_status): Rename error_desc to stop_desc,
add fields user_name, notes, start_time, stop_time.
(struct uploaded_tp): Add fields hit_count, traceframe_usage.
* tracepoint.c (trace_user): New global.
(trace_notes): New global.
(trace_stop_notes): New global.
(start_tracing): Add argument and trace note handling.
(stop_tracing): Ditto.
(trace_start_command): Add notes argument.
(trace_stop_command): Ditto.
(trace_status_command): Report additional status info.
(trace_status_mi): Similarly.
(trace_save): Update, record tracepoint status.
(set_disconnected_tracing): Call target method directly.
(send_disconnected_tracing_value): Remove.
(set_trace_user): New function.
(set_trace_notes): New function.
(set_trace_stop_notes): New function.
(parse_trace_status): Handle additional status.
(parse_tracepoint_status): New function.
(parse_tracepoint_definition): Call it.
(tfile_get_tracepoint_status): New function.
(init_tfile_ops): Use it.
(_initialize_tracepoint): Add new setshows.
* target.h (struct target_ops): New methods to_get_tracepoint_status
and to_set_trace_notes.
(target_get_tracepoint_status): New macro.
(target_set_trace_notes): New macro.
* target.c (update_current_target): Add new methods.
* remote.c (remote_get_tracepoint_status): New function.
(remote_set_trace_notes): New function.
(init_remote_ops): Add them.
* mi/mi-main.c (mi_cmd_trace_start): Add argument to call.
(mi_cmd_trace_stop): Ditto.
* tracepoint.c (struct tracepoint): New field traceframe_usage.
(tracing_start_time): New global.
(tracing_stop_time): New global.
(tracing_user_name): New global.
(tracing_notes): New global.
(tracing_stop_note): New global.
(cmd_qtstart): Set traceframe_usage, start_time.
(stop_tracing): Set stop_time.
(cmd_qtstatus): Report additional status.
(cmd_qtp): New function.
(handle_tracepoint_query): Call it.
(cmd_qtnotes): New function.
(handle_tracepoint_general_set): Call it.
(get_timestamp): Rename from tsv_get_timestamp.
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
note-related options and variables.
(Tracepoint Packets): Document packet changes.
* gdb.trace/tstatus.exp: New.
* gdb.trace/actions.c: Include string.h.
Kwok Cheung Yeung <kcy@codesourcery.com>
* NEWS: Document shorter fast tracepoints and qTMinFTPILen packet.
* i386-tdep.c (i386_fast_tracepoint_valid_at): Query target for
the minimum instruction size for fast tracepoints.
* target.h (struct target_ops): Add new method
to_get_min_fast_tracepoint_insn_len.
(target_get_min_fast_tracepoint_insn_len): New.
* target.c (update_current_target): Set up new target operation.
* remote.c (remote_write_bytes_aux): Fix typo.
(remote_get_min_fast_tracepoint_insn_len): New.
(init_remote_ops): Initialize new field.
* gdb.texinfo (Create and Delete Tracepoints): Describe what is
needed to get shorter fast tracepoints.
(Tracepoint Packets): Document new qTMinFTPILen packet.
* linux-x86-low.c (small_jump_insn): New.
(i386_install_fast_tracepoint_jump_pad): Add arguments for
trampoline and error message, build a trampoline and issue a small
jump instruction to it.
(x86_install_fast_tracepoint_jump_pad): Add arguments for
trampoline and error message.
(x86_get_min_fast_tracepoint_insn_len): New.
(the_low_target): Add call to x86_get_min_fast_tracepoint_insn_len.
* linux-low.h (struct linux_target_ops): Add arguments to
install_fast_tracepoint_jump_pad operation, add new operation.
* linux-low.c (linux_install_fast_tracepoint_jump_pad): Add
arguments.
(linux_get_min_fast_tracepoint_insn_len): New function.
(linux_target_op): Add new operation.
* tracepoint.c (gdb_trampoline_buffer): New IPA variable.
(gdb_trampoline_buffer_end): Ditto.
(gdb_trampoline_buffer_error): Ditto.
(struct ipa_sym_addresses): Add fields for new IPA variables.
(symbol_list): Add entries for new IPA variables.
(struct tracepoint): Add fields to hold the address range of the
trampoline used by the tracepoint.
(trampoline_buffer_head): New static variable.
(trampoline_buffer_tail): Ditto.
(claim_trampoline_space): New function.
(have_fast_tracepoint_trampoline_buffer): New function.
(clone_fast_tracepoint): Fill in trampoline fields of tracepoint
structure.
(install_fast_tracepoint): Ditto, also add error buffer argument.
(cmd_qtminftpilen): New function.
(handle_tracepoint_query): Add response to qTMinFTPILen packet.
(fast_tracepoint_from_trampoline_address): New function.
(fast_tracepoint_collecting): Handle trampoline as part of jump
pad space.
(set_trampoline_buffer_space): New function.
(initialize_tracepoint): Initialize new IPA variables.
* target.h (struct target_ops): Add arguments to
install_fast_tracepoint_jump_pad operation, add new
get_min_fast_tracepoint_insn_len operation.
(target_get_min_fast_tracepoint_insn_len): New.
(install_fast_tracepoint_jump_pad): Add arguments.
* server.h (IPA_BUFSIZ): Define.
* linux-i386-ipa.c: Include extra header files.
(initialize_fast_tracepoint_trampoline_buffer): New function.
(initialize_low_tracepoint): Call it.
* server.h (set_trampoline_buffer_space): Declare.
(claim_trampoline_space): Ditto.
(have_fast_tracepoint_trampoline_buffer): Ditto.
* gdb.trace/ftrace.c: New.
* gdb.trace/ftrace.exp: New.
of parameter from tracepoint to bp_location.
* target.c (update_current_target): Update.
* tracepoint.c (start_tracing): Update.
* remote.c (remote_download_tracepoint): Remove loop for each location
of a tracepoint.
gdb/
* linux-nat.c (linux_nat_filter_event): Remove `options'
parameter, and dead code that used it. If we're handling a
PTRACE_EVENT_EXEC event, and the thread group leader is no longer
in our lwp list, re-add it.
(check_zombie_leaders): New.
(linux_nat_wait_1): Remove `options' and `pid' locals. Always
wait for children with WNOHANG, and always wait for all children.
Don't check for no resumed children upfront. Simplify wait loop.
Check for zombie thread group leaders after handling all wait
statuses. Return TARGET_WAITKIND_NO_RESUMED if there no
unwaited-for children left.
* infrun.c (fetch_inferior_event): Handle TARGET_WAITKIND_NO_RESUMED.
(handle_inferior_event): Handle TARGET_WAITKIND_NO_RESUMED.
(normal_stop): Handle TARGET_WAITKIND_NO_RESUMED.
* target.h (enum target_waitkind) <TARGET_WAITKIND_NO_RESUMED>: New.
gdb/testsuite/
* gdb.threads/no-unwaited-for-left.c: New.
* gdb.threads/no-unwaited-for-left.exp: New.
* gdb.threads/non-ldr-exc-1.c: New.
* gdb.threads/non-ldr-exc-1.exp: New.
* gdb.threads/non-ldr-exc-2.c: New.
* gdb.threads/non-ldr-exc-2.exp: New.
* gdb.threads/non-ldr-exc-3.c: New.
* gdb.threads/non-ldr-exc-3.exp: New.
* gdb.threads/non-ldr-exc-4.c: New.
* gdb.threads/non-ldr-exc-4.exp: New.
* infrun.c (disable_randomization): New global variable.
(show_disable_randomization): New function.
(set_disable_randomization): Likewise.
(_initialize_infrun): Install set/show disable-randomization
commands.
* linux-nat.c (disable_randomization): Remove.
(show_disable_randomization): Likewise.
(set_disable_randomization): Likewise.
(_initialize_linux_nat): No longer install set/show
disable-randomization commands here.
(linux_nat_supports_disable_randomization): New function.
(linux_nat_add_target): Install it.
* remote.c (PACKET_QDisableRandomization): New enum value.
(remote_protocol_packets): Support QDisableRandomization.
(_initialize_remote): Likewise.
(remote_supports_disable_randomization): New function.
(init_remote_ops): Install it.
(extended_remote_supports_disable_randomization): New function.
(init_extended_remote_ops): Install it.
(extended_remote_disable_randomization): New function.
(extended_remote_create_inferior_1): Call it.
* target.h (struct target_ops): Add to_supports_disable_randomization.
(target_supports_disable_randomization): Add prototype.
* target.c (target_supports_disable_randomization): New function.
(find_default_supports_disable_randomization): Likewise.
(init_dummy_target): Install it.
doc/
* gdb.texinfo (Starting your Program): "set disable-randomization"
is no longer Linux-specific.
(Remote Configuration): Document "set remote
disable-randomization-packet".
(General Query Packets): Document "QDisableRandomization" packet
and add it to "qSupported" list.
gdbserver/
* configure.ac: Check support for personality routine.
* configure: Regenerate.
* config.in: Likewise.
* linux-low.c: Include <sys/personality.h>.
Define ADDR_NO_RANDOMIZE if necessary.
(linux_create_inferior): Disable address space randomization when
forking inferior, if requested.
(linux_supports_disable_randomization): New function.
(linux_target_ops): Install it.
* server.h (disable_randomization): Declare.
* server.c (disable_randomization): New global variable.
(handle_general_set): Handle QDisableRandomization.
(handle_query): Likewise for qSupported.
(main): Support --disable-randomization and --no-disable-randomization
command line arguments.
* target.h (struct target_ops): Add supports_disable_randomization.
(target_supports_disable_randomization): New macro.
gdb/
* record.c: Include event-loop.h, inf-loop.h.
(record_beneath_to_async): New global.
(tmp_to_async): New global.
(record_async_inferior_event_token): New global.
(record_open_1): Don't error out if async is enabled.
(record_open): Handle to_async. Create an async event source in
the event loop.
(record_close): Delete the async event source.
(record_resumed): New global.
(record_execution_dir): New global.
(record_resume, record_core_resume): Set them. Register the
target on the event loop.
(record_wait): Rename to ...
(record_wait_1): ... this. Add more debug output. Handle
TARGET_WNOHANG, and the target beneath returning
TARGET_WAITKIND_IGNORE.
(record_wait): Reimplement on top of record_wait_1.
(record_async_mask_value): New global.
(record_async, record_async_mask, record_can_async_p)
(record_is_async_p, record_execution_direction): New functions.
(init_record_ops, init_record_core_ops): Install new methods.
* infrun.c (fetch_inferior_event): Temporarily switch the global
execution direction to the direction the target was going.
(execution_direction): Change type to int.
* target.c (default_execution_direction): New function.
(update_current_target): Inherit and de_fault
to_execution_direction.
* target.h (struct target_ops) <to_execution_direction>: New
field.
(target_execution_direction): New macro.
* inferior.h (execution_direction): Change type to int.
experiment is still running.
gdb/
* breakpoint.c (disable_breakpoint): Disable all locations
associated with a tracepoint on target if a trace experiment is
running.
(disable_command): Disable a specific tracepoint location on target if
a trace experiment is running.
(do_enable_breakpoint): Enable all locations associated with a
tracepoint on target if a trace experiment is running.
(enable_command) Enable a specific tracepoint location on target if a
trace experiment is running.
* target.c (update_current_target): Add INHERIT and de_fault clauses for
to_supports_enable_disable_tracepoint, to_enable_tracepoint and
to_disable_tracepoint.
* target.h: Add declaration of struct bp_location.
(struct target_ops): Add new functions
to_supports_enable_disable_tracepoint, to_enable_tracepoint and
to_disable_tracepoint to target operations.
(target_supports_enable_disable_tracepoint): New macro.
(target_enable_tracepoint): New macro.
(target_disable_tracepoint): New macro.
* remote.c (struct remote_state): Add new field.
(remote_enable_disable_tracepoint_feature): New.
(remote_protocol_features): Add new entry.
(remote_supports_enable_disable_tracepoint): New.
(remote_enable_tracepoint): New.
(remote_disable_tracepoint): New.
(init_remote_ops): Add remote_enable_tracepoint,
remote_disable_tracepoint and remote_supports_enable_disable_tracepoint
to remote operations.
* tracepoint.c (start_tracing): Allow tracing to start without any
tracepoints enabled with just a warning if they can be re-enabled
later.
* NEWS: Add news item for the new behaviour of the enable and disable
GDB commands when applied to tracepoints.
Add news items for the new remote packets QTEnable and QTDisable.
gdb/doc/
* gdb.texinfo: Document change in the behaviour of the enable and
disable GDB commands when applied to tracepoints.
Document the EnableDisableTracepoints remote stub feature.
Document QTEnable and QTDisable in the list of tracepoint packets.
gdb/gdbserver/
* server.c (handle_query): Add EnableDisableTracepoints to the list
of supported features.
* tracepoint.c (clear_installed_tracepoints): Uninstall disabled
tracepoints.
(cmd_qtenable_disable): New.
(cmd_qtstart): Install tracepoints even if disabled.
(handle_tracepoint_general_set): Add call to cmd_qtenable_disable on
receiving a QTEnable or QTDisable packet.
(gdb_collect): Skip data collection if fast tracepoint is disabled.
(ust_marker_to_static_tracepoint): Do not ignore disabled static
tracepoints.
(gdb_probe): Skip data collection if static tracepoint is disabled.
Thiago Jung Bauermann <bauerman@br.ibm.com>
Implement support for PowerPC BookE masked watchpoints.
gdb/
* NEWS: Mention masked watchpoint support. Create "Changed commands"
section.
* breakpoint.h (struct breakpoint_ops) <works_in_software_mode>: New
method. Initialize to NULL in all existing breakpoint_ops instances.
(struct breakpoint) <hw_wp_mask>: New field.
* breakpoint.c (is_masked_watchpoint): Add prototype.
(update_watchpoint): Don't set b->val for masked watchpoints. Call
breakpoint's breakpoint_ops.works_in_software_mode if available.
(watchpoints_triggered): Handle the case of a hardware masked
watchpoint trigger.
(watchpoint_check): Likewise.
(works_in_software_mode_watchpoint): New function.
(insert_masked_watchpoint, remove_masked_watchpoint)
(resources_needed_masked_watchpoint)
(works_in_software_mode_masked_watchpoint, print_it_masked_watchpoint)
(print_one_detail_masked_watchpoint, print_mention_masked_watchpoint)
(print_recreate_masked_watchpoint, is_masked_watchpoint): New
functions.
(masked_watchpoint_breakpoint_ops): New structure.
(watch_command_1): Check for the existence of the `mask' parameter.
Set b->ops according to the type of hardware watchpoint being created.
* ppc-linux-nat.c (ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_masked_watch_num_registers): New functions.
(_initialize_ppc_linux_nat): Initialize to_insert_mask_watchpoint,
to_remove_mask_watchpoint and to_masked_watch_num_registers.
* target.c (update_current_target): Mention to_insert_mask_watchpoint,
to_remove_mask_watchpoint, and to_masked_watch_num_registers.
(target_insert_mask_watchpoint, target_remove_mask_watchpoint)
(target_masked_watch_num_registers): New functions.
* target.h (struct target_ops) <to_insert_mask_watchpoint>,
<to_remove_mask_watchpoint>, <to_masked_watch_num_registers>: New
methods.
(target_insert_mask_watchpoint, target_remove_mask_watchpoint)
(target_masked_watch_num_registers): Add prototypes.
gdb/doc/
* gdb.texinfo (Set Watchpoints): Document mask parameter.
(PowerPC Embedded): Mention support of masked watchpoints.
add to_pass_signals.
(target_notice_signals): Remove.
(target_pass_signals): Add prototype.
* target.c (update_current_target): Remove to_notice_signals;
mention to_pass_signals.
(target_pass_signals): New function.
(debug_to_notice_signals): Remove.
(setup_target_debug): Do not install debug_to_notice_signals.
* infrun.c (signal_pass): New global.
(resume): Call target_pass_signals.
(handle_inferior_event): Report all signals while stepping over
non-steppable watchpoint. Reset trap_expected to ensure breakpoints
are re-inserted when stepping over a signal handler.
(signal_cache_update): New function.
(signal_stop_update): Call it.
(signal_print_update): Likewise.
(signal_pass_update): Likewise.
(handle_command): Call signal_cache_update and target_pass_signals
instead of target_notice_signals.
(_initialize_infrun): Initialize signal_pass.
* linux-nat.c (pass_mask): New global.
(linux_nat_pass_signals): New function.
(linux_nat_create_inferior): Report all signals initially.
(linux_nat_attach): Likewise.
(linux_nat_resume): Use pass_mask to decide whether to directly
handle an inferior signal.
(linux_nat_wait_1): Likewise.
(linux_nat_add_target): Install to_pass_signals callback.
* nto-procfs.c (notice_signals): Remove.
(procfs_resume): Do not call notice_signals.
(procfs_notice_signals): Remove.
(procfs_pass_signals): New function.
(init_procfs_ops): Install to_pass_signals callback instead of
to_notice_signals callback.
(_initialize_procfs): Report all signals initially.
* procfs.c (procfs_notice_signals): Remove.
(procfs_pass_signals): New function.
(procfs_target): Install to_pass_signals callback instead of
to_notice_signals callback.
(register_gdb_signals): Remove.
(procfs_debug_inferior): Report all signals initially.
(procfs_init_inferior): Remove redundant register_gdb_signals call.
* remote.c (remote_pass_signals): Add numsigs and pass_signals
parameters; use them instead of calling signal_..._state routines.
(remote_notice_signals): Remove.
(remote_start_remote): Report all signals initially.
(remote_resume): Do not call remote_pass_signals.
(_initialize_remote): Install to_pass_signals callback instead of
to_notice_signals callback.
Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
Implement support for PowerPC BookE ranged breakpoints.
gdb/
* NEWS: Mention support for ranged breakpoints on embedded PowerPC.
* breakpoint.h (struct bp_target_info) <length>: New member
variable.
(struct breakpoint_ops) <breakpoint_hit>: Take struct bp_location
instead of struct breakpoint as argument, and also add ASPACE
and BP_ADDR arguments. Update all callers.
(struct breakpoint_ops) <print_one_detail>: New method.
(struct breakpoint) <addr_string_range_end>: New member variable.
* breakpoint.c (breakpoint_location_address_match): Add function
prototype.
(insert_bp_location): Set bl->target_info.length.
(breakpoint_here_p): Call breakpoint_location_address_match.
(moribund_breakpoint_here_p): Likewise.
(regular_breakpoint_inserted_here_p): Likewise.
(breakpoint_thread_match): Likewise.
(bpstat_stop_status): Likewise.
(bpstat_check_location): Move call to
breakpoint_ops.breakpoint_hit to the top.
(print_one_breakpoint_location): Call
breakpoint_ops.print_one_detail if available.
(breakpoint_address_match_range): New function.
(breakpoint_location_address_match): Likewise.
(breakpoint_locations_match): Compare the length field of the
locations too.
(hw_breakpoint_used_count): Count resources used by all locations
in a breakpoint, and use breakpoint_ops.resources_needed if
available.
(breakpoint_hit_ranged_breakpoint): New function.
(resources_needed_ranged_breakpoint): Likewise.
(print_it_ranged_breakpoint): Likewise.
(print_one_ranged_breakpoint): Likewise.
(print_one_detail_ranged_breakpoint): Likewise.
(print_mention_ranged_breakpoint): Likewise.
(print_recreate_ranged_breakpoint): Likewise.
(ranged_breakpoint_ops): New structure.
(find_breakpoint_range_end): New function.
(break_range_command): Likewise.
(delete_breakpoint): Free addr_string_range_end.
(update_breakpoint_locations): Add SALS_END argument. Update
all callers. Calculate breakpoint length if a non-zero SALS_END
is given. Call breakpoint_locations_match instead of
breakpoint_address_match.
(reset_breakpoint): Find SaL of the end of the range if B is a
ranged breakpoint.
(_initialize_breakpoint): Register break-range command.
* defs.h (print_core_address): Add function prototype.
* ppc-linux-nat.c (ppc_linux_ranged_break_num_registers): New
function.
(ppc_linux_insert_hw_breakpoint): Support ranged breakpoints.
(ppc_linux_remove_hw_breakpoint): Likewise.
(_initialize_ppc_linux_nat): Initialize
to_ranged_break_num_registers.
* target.c (update_current_target): Add comment about
to_ranged_break_num_registers.
(target_ranged_break_num_registers): New function.
* target.h (struct target_ops) <to_ranged_break_num_registers>:
New method.
(target_ranged_break_num_registers): Add function prototype.
* ui-out.c (ui_out_field_core_addr): Move address-printing logic to ...
* utils.c (print_core_address): ... here.
gdb/doc/
* gdb.texinfo (PowerPC Embedded): Document ranged breakpoints.
We have two stacks to deal with on ia64, when making a function call.
The first is the usual stack frame, and the second is the register
stack frame. On ia64-linux, the register frame is setup by adjusting
the BSP register. Unfortunately for us, the HP-UX kernel does not allow
the debugger to change the value of the BSP.
To work around that limitation, the method I am using here is to push
some assembly code on the stack. This assembly code contains, among
other things, a call to the alloc insn, which sets up our frame for us.
An extensive comment in ia64-hpux-tdep.c explains the entire procedure.
Despite this approach, most of the code in ia64-tdep.c which sets up
the function call is still applicable - and only a few things need
to be done differently: For instance, instead of changing the BSP,
we do nothing. We store the parameters at a different location, etc.
So this patch also adjusts the inf-call code in ia64-tdep.c to make it
a little more extensible: I create a new ia64_infcall_ops structure
which allows an ABI to define how the few things that need to be
differentiated.
Another element that turned out to be necessary but is more of a detail
is that the computation of the linkage pointer needs to be handled
specially for symbols inside shared libraries. This is especially
visible when calling malloc, which happens everytime memory needs to
be allocated in inferior memory... The special treatment included
again the necessity to use some routines only available on the host.
So another target object TARGET_OBJECT_HPUX_SOLIB_GOT was created for
that purpose.
gdb/ChangeLog:
* ia64-tdep.h (struct regcache): Forward declare.
(struct ia64_infcall_ops): New struct type.
(struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
and "infcall_ops".
* ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
Renames ia64_find_global_pointer.
(ia64_find_global_pointer, ia64_allocate_new_rse_frame)
(ia64_store_argument_in_slot, ia64_set_function_addr: New function.
(ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
methods.
(ia64_infcall_ops): New static global constant.
(ia64_gdbarch_init): Set tdep->infcall_ops.
* ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
(ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
* ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
(ia64_hpux_dummy_code): New static global constant.
(ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
(ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
(ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
New function.
(ia64_hpux_infcall_ops): New static global constant.
(ia64_hpux_init_abi): Install gdbarch and tdep methods needed
for inferior function calls to work properly on ia64-hpux.
This fixes unwinding from a thread that is stopped inside a system call.
This can be seen when switching to a thread that is stopped doing a
pthread_cond_wait, for instance...
The comments inside the code should explain what is happening in our
case (the HP-UX exception in the case of system calls): Under certain
circumstances (program stopped inside syscall), the offset to apply to
the current BSP in order to compute the previous BSP is not the usual
CFM & 0x7f.
We parts in this patch:
1. Figuring out that we are stopped inside a syscal: This requires
a TT_LWP_RUREGS ttrace call, which is not directly possible from
ia64-tdep.c. So use defined a new TARGET_OBJECT_HPUX_UREGS object
to request it from the -nat side.
2. Add a gdbarch_tdep method that allows us to change the default
behavior on ia64-hpux, permitting us to have a different "size of
register frame" in that one particular case.
gdb/ChangeLog:
* target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
* ia64-tdep.h (struct frame_info): forward declaration.
(struct gdbarch_tdep): Add field size_of_register_frame.
* ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
to determine the size of the register frame.
(ia64_size_of_register_frame): New function.
(ia64_gdbarch_init): Set tdep->size_of_register_frame.
* ia64-hpux-tdep.c: Include "target.h" and "frame.h".
(IA64_HPUX_UREG_REASON): New macro.
(ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
New functions.
(ia64_hpux_init_abi): Set tdep->size_of_register_frame.
* ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
(ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
objects.
Thiago Jung Bauermann <bauerman@br.ibm.com>
Implement support for PowerPC BookE ranged watchpoints.
gdb/
* breakpoint.h
(struct breakpoint_ops) <resources_needed>: New method.
Initialize to NULL in all existing breakpoint_ops instances.
(struct breakpoint) <exact>: New field.
(target_exact_watchpoints): Declare external global.
* breakpoint.c (target_exact_watchpoints): New global flag.
(update_watchpoint): Set b->type to bp_hardware_watchpoint and
b->enable_state to bp_enabled before calling
hw_watchpoint_used_count.
(hw_watchpoint_used_count): Iterate over all bp_locations in a
watchpoint. Call breakpoint's breakpoint_ops.resources_needed
if available.
(insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
if the watchpoint is exact.
(resources_needed_watchpoint): New function.
(watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
(watch_command_1): Set b->exact if the user asked for an exact
watchpoint and one can be set.
(can_use_hardware_watchpoint): Add exact_watchpoints argument.
Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
the user asks for an exact watchpoint and one can be set. Return
number of needed debug registers to watch the expression.
* gdbtypes.c (is_scalar_type): New function, based on
valprint.c:scalar_type_p.
(is_scalar_type_recursive): New function.
* gdbtypes.h (is_scalar_type_recursive): Declare.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
handle regions when ranged watchpoints are available.
(create_watchpoint_request): New function.
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
create_watchpoint_request.
* rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
(_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
`set powerpc' and `show powerpc' commands.
* target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
Mention documentation comment in the target macro.
(target_region_ok_for_hw_watchpoint): Document return value.
gdb/doc/
* gdb.texinfo (PowerPC Embedded): Document ranged watchpoints and
the "set powerpc exact-watchpoints" flag.
Convert hardware watchpoints to use breakpoint_ops.
gdb/
* breakpoint.h (breakpoint_ops) <insert>: Rename to...
<insert_location>: ... this. Return int instead of void.
Accept pointer to struct bp_location instead of pointer to
struct breakpoint. Adapt all implementations.
(breakpoint_ops) <remove>: Rename to...
<remove_location>: ... this. Accept pointer to struct bp_location
instead of pointer to struct breakpoint. Adapt all implementations.
* breakpoint.c (insert_catchpoint): Delete function.
(insert_bp_location): Call the watchpoint or catchpoint's
breakpoint_ops.insert method.
(remove_breakpoint_1): Call the watchpoint or catchpoint's
breakpoint_ops.remove method.
(insert_watchpoint, remove_watchpoint): New functions.
(watchpoint_breakpoint_ops): New structure.
(watch_command_1): Initialize the OPS field.
* inf-child.c (inf_child_insert_fork_catchpoint)
(inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
(inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
(inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
Delete functions.
(inf_child_target): Remove initialization of to_insert_fork_catchpoint,
to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
to_remove_exec_catchpoint and to_set_syscall_catchpoint.
* target.c (update_current_target): Change default implementation of
to_insert_fork_catchpoint, to_remove_fork_catchpoint,
to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
to_insert_exec_catchpoint, to_remove_exec_catchpoint and
to_set_syscall_catchpoint to return_one.
(debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
(debug_to_insert_exec_catchpoint): Report return value.
* target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
(to_insert_exec_catchpoint): Change declaration to return int instead
of void.
gdb/testsuite/
* gdb.base/foll-exec.exp: Adapt to new error string when the catchpoint
type is not supported.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
This target_ops routine appears to be unused in practice, so this patch
removes it.
gdb/ChangeLog:
* inf-child.c (inf_child_acknowledge_created_inferior): Delete.
(inf_child_target): Do not set t->to_acknowledge_created_inferior.
* inf-ptrace.c (inf_ptrace_create_inferior): Remove call to
target_acknowledge_created_inferior.
* inf-ttrace.c (inf_ttrace_him): Likewise.
* target.h (struct target_ops): Delete to_acknowledge_created_inferior
field.
(target_acknowledge_created_inferior): Delete.
* target.c (update_current_target): Remove setting of
to_acknowledge_created_inferior field. Do default value for that
field either.
(debug_to_acknowledge_created_inferior): Delete.
(setup_target_debug): Remove setting of
current_target.to_acknowledge_created_inferior.
Make core files the process_stratum.
* corefile.c (core_target): New variable.
(core_file_command): Remove variable t, use core_target.
* corelow.c (core_ops): Make it static.
(init_core_ops): Change to process_stratum. Initialize CORE_TARGET.
* defs.h (make_cleanup_unpush_target): New prototype.
* gdbarch.h: Regenerate.
* gdbarch.sh (core_pid_to_str): Remove core_stratum from its comment.
* gdbcore.h (core_target): New declaration.
* inf-ptrace.c (inf_ptrace_create_inferior, inf_ptrace_attach): New
variables ops_already_pushed and back_to. Use push_target,
make_cleanup_unpush_target and discard_cleanups calls.
* record.c (record_open): Replace core_stratum by a core_bfd check.
* target.c (target_is_pushed): New function.
(find_core_target): Remove.
* target.h (enum strata) <core_stratum>: Remove.
(target_is_pushed): New declaration.
(find_core_target): Remove declaration.
* tracepoint.c (init_tfile_ops) <to_stratum>: Remove comment.
* utils.c (do_unpush_target, make_cleanup_unpush_target): New functions.
gdb/doc/
Make core files the process_stratum.
* gdb.texinfo (Active Targets): Remove core_stratum. Include
record_stratum example.
gdb/testsuite/
Make core files the process_stratum.
* gdb.base/corefile.exp (run: load core again)
(run: sanity check we see the core file, run: with core)
(run: core file is cleared, attach: load core again)
(attach: sanity check we see the core file, attach: with core)
(attach: core file is cleared): New tests.
* gdb.base/coremaker.c (main): New parameters. Implement "sleep" argv.
Thiago Jung Bauermann <bauerman@br.ibm.com>
Support for hw accelerated condition watchpoints in booke powerpc.
* breakpoint.c (fetch_watchpoint_value): Rename to fetch_subexp_value
and move to eval.c. Change callers.
(insert_bp_location): Pass watchpoint condition in
target_insert_watchpoint.
(remove_breakpoint_1) Pass watchpoint condition in
target_remove_watchpoint.
(watchpoint_locations_match): Call
target_can_accel_watchpoint_condition.
* eval.c: Include wrapper.h.
(fetch_subexp_value): Moved from breakpoint.c.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint):
Formatting fix.
(can_use_watchpoint_cond_accel): New function.
(calculate_dvc): Likewise.
(num_memory_accesses): Likewise.
(check_condition): Likewise.
(ppc_linux_can_accel_watchpoint_condition): Likewise
(ppc_linux_insert_watchpoint): Call can_use_watchpoint_cond_accel,
check_condition and calculate_dvc.
(ppc_linux_remove_watchpoint): Likewise.
(_initialize_ppc_linux_nat): Set to_can_accel_watchpoint_condition to
ppc_linux_can_accel_watchpoint_condition
* target.c (debug_to_insert_watchpoint): Add argument for watchpoint
condition.
(debug_to_remove_watchpoint): Likewise.
(debug_to_can_accel_watchpoint_condition): New function.
(update_current_target): Set to_can_accel_watchpoint_condition.
(setup_target_debug): Set to_can_accel_watchpoint_condition.
* target.h: Add opaque declaration for struct expression.
(struct target_ops) <to_insert_watchpoint>,
<to_remove_watchpoint>: Add new arguments to pass the watchpoint
<to_can_accel_watchpoint_condition>: New member.
condition. Update all callers and implementations.
(target_can_accel_watchpoint_condition): New macro.
* value.c (free_value_chain): New function.
* value.h (fetch_subexp_value): New prototype.
(free_value_chain): Likewise.
Add per-operation permission flags.
* target.h (struct target_ops): New method to_set_permissions.
(target_set_permissions): New macro.
(target_insert_breakpoint): Change macro to function.
(target_remove_breakpoint): Ditto.
(target_stop): Ditto.
(may_write_registers): Declare.
(may_write_memory): Declare.
(may_insert_breakpoints): Declare.
(may_insert_tracepoints): Declare.
(may_insert_fast_tracepoints): Declare.
(may_stop): Declare.
* target.c (may_write_registers, may_write_registers_1): New globals.
(may_write_memory, may_write_memory_1): New globals.
(may_insert_breakpoints, may_insert_breakpoints_1): New globals.
(may_insert_tracepoints, may_insert_tracepoints_1): New globals.
(may_insert_fast_tracepoints, may_insert_fast_tracepoints_1): New
globals.
(may_stop, may_stop_1): New global.
(target_xfer_partial): Test for write permission.
(target_store_registers): Ditto.
(target_insert_breakpoint): New function.
(target_remove_breakpoint): New function.
(target_stop): New function.
(_initialize_targets): Add new set/show variables.
(set_write_memory_permission): New function.
(update_target_permissions): New function.
(set_target_permissions): New function.
(update_current_target): Default to_set_permissions.
(_initialize_targets): Use new globals and setter function.
* tracepoint.c (start_tracing): Test for permission.
* inferior.h (update_observer_mode): Declare.
* infrun.c (non_stop_1): Define earlier.
(observer_mode, observer_mode_1): New globals.
(set_observer_mode, show_observer_mode): New functions.
(update_observer_mode): New function.
(_initialize_infrun): Define "set observer" command.
* remote.c (PACKET_QAllow): New optional packet.
(remote_protocol_features): Add QAllow.
(remote_set_permissions): New function.
(remote_start_remote): Call it.
(init_remote_ops): Add it to target vector.
(_initialize_remote): Add config command for QAllow.
* gdb.texinfo (Observer Mode): New section.
(General Query Packets): Document QAllow.
* gdb.base/permissions.exp: New file.
Tom Tromey
Yao Qi
Markus Metzger
Pedro Alves
Joel Brobecker
Luis Machado
Jan Kratochvil
Doug Evans
Gary Benson
Joel Brobecker
Markus Metzger
Hafiz Abid Qadeer
Stan Shebs
Tristan Gingold
Maciej W. Rozycki
Ulrich Weigand
Kwok Yeung
Thiago Jung Bauermann
Michael Snyder
Vladimir Prus