Allow GDB to run on Linux 2.0 again.
* config.in: Add HAVE_PTRACE_GETREGS.
* configure.in: Check if <sys/ptrace.h> defines PTRACE_GETREGS.
* configure: Regenerated.
* config/i386/nm-linux.h (CANNOT_FETCH_REGISTER,
CANNOT_STORE_REGISTER): New defines.
* i386-linux-nat.c (have_ptrace_getregs): New variable.
(PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register,
old_fetch_inferior_registers, CANNOT_STORE_REGISTER,
store_register, old_store_inferior_registers): Copied over from
`inptrace.c' as a temporary measure.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs):
Conditionalize on HAVE_PTRACE_GETREGS. Define stubs if
HAVE_PTRACE_GETREGS isn't defined.
(fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails
with EIO.
(fetch_inferior_registers, store_inferior_registers): Fall back on
the method use in `infptrace.c' (by calling
old_fetch_inferior_registers and old_store_inferior_registers) if
`have_ptrace_getregs' isn't set.
* configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
prfpregset_t in <sys/procfs.h>.
* config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
HAVE_PRFPREGSET_T.
* gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
prgregset_t and prfpregset_t if they are not already present.
* gnu-regex.c: Check ENABLE_NLS instead of HAVE_LIBINTL_H.
* configure.in: Don't check for libintl.h.
* configure, config.in: Regenerated.
Fixes a problem on debian systems, a conflict between the
/usr/include/libintl.h and the routines that are actually linked in,
up in ../intl.
at run-time. At the moment, the only thing this affects is the
set of registers visible.
* config/rs6000/tm-rs6000.h (REGISTER_NAME): Define this as a call
to the function rs6000_register_name.
(rs6000_register_name): Include extern decl.
(NUM_REGS): Bump to 183. What's the right way to do this?
(FIRST_UISA_SP_REGNUM, LAST_UISA_SP_REGNUM): Renamed from
FIRST_SP_REGNUM, LAST_SP_REGNUM.
(REGISTER_BYTES): Recompute this.
* rs6000-tdep.c: Renamed all uses of FIRST_SP_REGNUM and
LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
some concomitant formatting changes.
#include "gdbcmd.h", so we can define commands here.
(struct variant): New structure.
(COMMON_UISA_REG_NAMES, PPC_UISA_SPR_NAMES, PPC_SEGMENT_REG_NAMES,
PPC_32_OEA_SPR_NAMES, num_registers): New macros.
(register_names_rs6000, register_names_uisa, register_names_403,
register_names_403GC, register_names_505, register_names_860,
register_names_601, register_names_602, register_names_603,
register_names_604, register_names_750, variants): New variables.
(rs6000_register_name, install_variant, find_variant_by_name,
install_variant_by_name, list_variants, show_current_variant,
set_processor, show_processor): New functions.
(_initialize_rs6000_tdep): Define new commands `set processor' and
`show processor', and call install_variant_by_name to set the
default variant.
* rs6000-nat.c: Renamed all uses of FIRST_SP_REGNUM and
LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
some concomitant formatting changes.
* configure.in: Accept the `--with-cpu' flag, to specify a default
processor variant.
* acconfig.h: Provide a blurb for TARGET_CPU_DEFAULT, which is set
by configure's `--with-cpu' flag.
* config.in, configure: Regenerated.
* defs.h: Move _initialize_printcmd, _initialize_stack,
_initialize_blockframe out of here and in to their respective .c files.
* blockframe.c: Move _initialize_blockframe prototype to here.
* printcmd.c: Move _initialize_printcmd prototype to here.
* stack.c: Move _initialize_stack prototype to here.
* source.c, symtab.h: Move _initialize_source prototype to the .c file.
* values.c, value.h: Move _initialize_values prototype to the .c file.
* gdbthread.h, thread.c: Move _initialize_thread prototype to the .c
file.
* breakpoint.c, breakpoint.h: Move _initialize_breakpoint prototype
to the .c file.
* abug-rom.c alpha-nat.c alpha-tdep.c annotate.c ax-gdb.c bcache.c:
Standardize comments for the prototype section of these files.
* configure.in: Look in libc for wctype before looking for it in libc.
The last one is to fix the GNU ld (~2.9.1) + Solaris 2.6 interaction problem
where an empty stub library (libw) causes a core dump when we call vasprintf
(e.g. `info br') in the final linked gdb.
version didn't work for sol2.6; pushed it to autoconf.
* configure.in (gdb_cv_proc_service_is_old): new test.
* acconfig.h (PROC_SERVICE_IS_OLD): new define.
* configure, config.in: regenerate.
* configure.in: Check for sys/debugreg.h, asm/debugreg.h.
* i386v-nat.c: Include asm/debugreg.h, sys/debugreg.h if it is not
present.
This is to work around a conflict where the Linux 2.1.x kernel and glibc
2.0.x are not in sync; including <sys/debugreg.h> will result in an error.
With luck, these losers will get their act together and we can trash
this hack in the near future.
* configure.in: Add more header files to AC_CHECK_HEADERS.
* configure: Regenerated.
* command.c: Include wait.h or sys/wait.h if present.
* inftarg.c: Ditto.
* core-aout.c: Include ptrace.h or sys/ptrace.h if present, based
on autoconf test.
* infptrace.c: Ditto.
* expprint.c: Include ctype.h for isprint prototype.
* i386aix-nat.c: Include sys/reg.h if autoconf says it is present.
* i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if
present, based on autoconf test.
* utils.c: Include curses.h and term.h if present.
(puts_debug): Change 'carriage_return' local variable to return_p
to avoid name clash.
* config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE,
determine it with autoconf.
* config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it
with autoconf.
* config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it
with autoconf.
* config/i386/nm-i386v.h: Ditto.
* config/i386/nm-symmetry.h: Ditto.
* config/m88k/xm-cxux.h: Ditto.
* config/m88k/xm-dgux.h: Ditto.
* config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary.
* config/m68k/nm-delta68.h: Removed.
* configure.in: Add some tests for gnu-regex.c's benefit.
See if btowc() function is provided in C library.
* configure, config.in: Regenerated.
* Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c
if necessary.
* btowc.c: New file.
* gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris'
benefit.
Drop namespace preserving defines for now.
Mods based on the modifications used in GNU grep 2.2 to make gnu-regex.c
compile on other OSes.
* configure.in (strerror): Check if function must be declared.
* acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
* gdb_string.h (strerror): Function declaration issued if
NEED_DECLARATION_STRERROR.
* configure, config.in : Files regenerated.
In dwarf2read.c, if the ABI is 32 bit and 64 bit addresses are encountered
discard the most significant 32 bits.
Use CORE_ADDR for address variables instead of long.
Add more explicit tx49 configur target.
Check/use sigaction/SA_RESTART in remote-sim.c
* config.in, configure.in, configure: Check for <objlist.h>.
* configure.tgt: Handle mips*-sgi-irix6* like irix5 for now.
* cp-valprint.c (cp_print_value_fields): Use SYMBOL_VALUE_ADDRESS
instead of SYMBOL_BLOCK_VALUE to get the address of a static member.
* dwarf2read.c: Turn warnings and recoverable errors into complaints,
add new complaints where appropriate.
gcc -Wall cleanup.
(struct line_head): Change line_base from char to int to avoid
problems with compilers whose plain char is represented by an
unsigned char.
(struct partial_die_info): Add is_declaration field.
(dwarf2_tmp_obstack): New obstack for allocating temporary storage
used during symbol reading.
(cu_header_offset): New variable for resolving relative reference
dies.
(optimized_out, basereg, islocal, frame_base_reg, frame_base_offset):
New interface variables for decode_locdesc.
(struct dwarf2_pinfo): New structure for communication between
psymtab and symtab reading, passed via pst->read_symtab_private.
(dwarf2_has_info, dwarf2_build_psymtabs): Accept objects files
without line number sections.
(dwarf2_build_psymtabs_hard): Initialize temporary obstack
for symbol reading.
Allocate and initialize pst->read_symtab_private.
Relocate pst->textlow and pst->texthigh with baseaddr.
(scan_partial_symbols): Do not add DW_AT_declaration symbols
to the partial symbol table.
Add file scope enumerator symbols to the partial symbol table.
Fix typo in highpc computation.
If we didn't find a lowpc, set it to highpc to avoid complaints
from `maint check.
(add_partial_symbol): Relocate symbol values with baseaddr.
Add static DW_TAG_subprogram and DW_TAG_variable symbols to the
minimal symbol table.
Obtain symbol values for DW_TAG_variable symbols from the location
descriptor, skip symbols with missing location desciptors.
Skip symbols for aggregate types without children.
Handle enumerator symbols.
(dwarf2_psymtab_to_symtab): Issue symbol reading message if verbose.
(psymtab_to_symtab_1): Set local variables from
pst->read_symtab_private, set cu_header_offset and baseaddr.
Initialize temporary obstack for symbol reading, initialize
buildsym and add a cleanup to really_free_pendings.
Relocate highpc with baseaddr when calling end_symtab.
If the compilation is from a C file generated by language
preprocessors, do not set the symtab language if it was already
deduced by start_subfile.
Removed verbose sorting symbol table message.
(process_die): Handle DW_TAG_ptr_to_member_type and
DW_TAG_reference_type.
Use read_subroutine_type to get the function type for
DW_TAG_subprogram before calling read_func_scope.
(read_file_scope): Initialize file name to <unknown>, start_subfile
expects a non-NULL name.
If we didn't find a lowpc, set it to highpc to avoid complaints
from finish_symbol.
Relocate lowpc and highpc with baseaddr.
Get rid of Irix6.2 native cc compile machine prefix in comp_dir.
Zero out ftypes for each new compilation unit (may be different
language or different objfile).
Accept compilation units without line number information, pass
comp_dir to decode_lines.
(read_func_scope): Initialize function name to <unknown> to avoid
core dumps when DW_AT_name is missing.
Relocate lowpc and highpc with baseaddr.
Handle DW_AT_frame_base, keep result for DW_OP_fbreg operations.
Pass function type to new_symbol.
(read_lexical_block_scope): Relocate lowpc and highpc with baseaddr.
(read_structure_scope): Set TYPE_TAG_NAME, not TYPE_NAME.
Handle DW_TAG_class_type.
Copy fields to type_obstack, release temporary storage for fields.
Don't add symbol if die is a stub die and has no children.
Handle C++ static member fields.
(read_enumeration): Set TYPE_TAG_NAME, not TYPE_NAME.
Copy fields to type_obstack, release temporary storage for fields.
Let new_symbol handle the symbol creation for enumerators
instead of handcrafting a symbol.
Determine signedness of enum type from enumerators.
(dwarf_read_array_type): Handle variable length arrays.
Use lookup_pointer_type instead of handcrafting a type.
Create array type only if a DW_TAG_subrange_type was found.
(read_tag_pointer_type, read_tag_reference_type):
Use lookup_pointer_type and lookup_reference_type instead
of handcrafting a type.
(read_tag_ptr_to_member_type): New function to handle
DW_TAG_ptr_to_member_type.
(read_subroutine_type): Handle parameter dies.
Use lookup_function_type instead of handcrafting a type.
(read_typedef): Allocate a TYPE_CODE_TYPEDEF type for the typedef.
(read_base_type): If the type has a name, use init_type to create
a new type instead of second guessing a fundamental type.
(read_comp_unit): Reset die reference table before building
a new one.
(dwarf2_read_section): Read section contents into psymbol_obstack.
(dwarf2_read_abbrevs): Handle unterminated abbreviations
for a compile unit gracefully.
(read_partial_die): Zero partial die before reading its info.
Handle DW_AT_declaration.
Fix typo in handling of DW_FORM_block4.
(read_full_die): Fix typo in handling of DW_FORM_block4.
(read_1_signed_byte, read_2_signed_bytes, read_4_signed_bytes):
New routines to get signed values from a buffer.
(read_n_bytes, read_string): Allocate storage from the temporary
obstack. If the host char size permits it, return pointer
to buffer instead of allocating storage.
(set_cu_language): Handle DW_LANG_Mips_Assembler.
(dwarf_attr): Return NULL if reference die for DW_AT_specification
or DW_AT_abstract_origin die is not found.
(record_minimal_symbol): Removed, replaced with a direct call to
prim_record_minimal_symbol, it now handles saving the string itself.
(convert_locdesc): Removed, partial symtab reading now uses
decode_locdesc.
(dwarf_attr): Use dwarf2_get_ref_die_offset to get the absolute
offset for the die reference.
(dwarf_decode_lines): Complain if the line section info is missing.
Use read_1_signed_byte to extract lh.line_base to avoid
problems with compilers whose plain char is represented by an
unsigned char.
Add cleanups for allocated temporary storage.
Start a subfile for the first file in the state machine.
Fix off by one problem with dirs.dirs access.
Use comp_dir when directory index is 0.
Support multiple sequences (from Jason Merrill <jason@cygnus.com>).
(dwarf2_start_subfile): Try to keep line numbers from identical
absolute and relative file names in a common subfile.
(new_symbol): Allocate symbol and symbol name on the symbol_obstack.
Set SYMBOL_LINE from DW_AT_decl_line if present.
Set SYMBOL_TYPE from passed type if not NULL.
Change DW_TAG_variable symbol types with missing type entries
to a sensible type.
Handle optimized_out, offreg and islocal storage classes.
Add external symbols with type information whose address isn't
known as LOC_UNRESOLVED symbols.
Synthesize typedefs for C++ classes, structs, unions and enumerations.
Handle DW_TAG_enumerator symbols, complain for unrecognized
symbol tags.
(die_type): A missing DW_AT_type represents a void type.
Use dwarf2_get_ref_die_offset to get the absolute offset for
the die reference.
(die_containing_type): New function to build type from
DW_AT_containing_type attribut.
(read_type_die): Handle DW_TAG_ptr_to_member_type.
Treat DW_TAG_subprogram like DW_TAG_subroutine_type.
(dwarf_base_type): Fix typo with creation of FT_UNSIGNED_SHORT
fundamental type.
(create_name): Removed, symbol name allocation is now done
in new_symbol.
(dump_die): Use print_address_numeric to print a CORE_ADDR.
(dwarf2_empty_die_ref_table): New function to clear the die
reference table.
(dwarf2_get_ref_die_offset): New function to get the absolute
die offset from a die reference attribute.
(decode_locdesc): Complete rewrite using a stack, code mostly
borrowed from dwarfread.c:locval.
(dwarf_alloc_type): Removed, replaced by direct calls to alloc_type.
(dwarf_alloc_block): Allocate block on temporary obstack.
* elfread.c (elf_symtab_read): When handling Irix dynamic symbols,
skip section name symbols and relocate all others.
(elf_symfile_read): Build dwarf2 psymtab even if offset is non-zero.
* irix5-nat.c (fetch_core_registers): Handle core_reg_sect
from N32 executables. Call registers_fetched after extracting
the registers.
(obj_list_variant, struct link_map, LM_OFFSET, LM_ADDR): New
definitions to enable support of O32 and N32 format objlists.
(struct so_list): New members offset, so_name and lmstart to
eliminate dependencies from the objlist format used.
(solib_map_sections, symbol_add_stub, solib_add,
info_sharedlibrary_command, solib_address, clear_solib): Use
so_name and LM_OFFSET.
(first_link_map_member): Rewrite to enable support of O32 and N32
format objlists.
(next_link_map_member, xfer_link_map_member): New functions to
support O32 and N32 format objlists.
(find_solib): Use first_link_map_member, next_link_map_member and
xfer_link_map_member.
(solib_create_inferior_hook): Use TARGET_SIGNAL_* instead of
host signal numbers.
* mdebugread.c (parse_partial_symbols, handle_psymbol_enumerators):
Pass CORE_ADDR variant to add_psymbol_to_list.
* mips-tdep.c (heuristic_proc_desc): Stop examining the prologue
if we encounter a positive stack adjustment. Handle `move $30,$sp'.
Handle `sd reg,offset($sp)' for 32 bit ABIs.
* symmisc.c (dump_msymbols, print_partial_symbols): Use
print_address_numeric to print a SYMBOL_VALUE_ADDRESS.
(dump_symtab): Print compilation directory if it is not NULL.
* valops.c (search_struct_field, value_struct_elt_for_reference):
Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the
address of a static member.
files).
* (SUBDIRS): Remove mswin.
* Change procedure for creating init.c. Speeds things up quite a
bit.
* config.in configure configure.in: Check for select, poll.
* Check for OSF header files before including hpux-thread.o.
* Don't configure doc or testsuite when building under MSVC.
* findvar.c value.h (read_register_pid write_register_pid): Make
global. Needed for hppa-tdep.c.
* (supply_register): Don't set pid to inferior_pid when supplying
registers.
* hppa-tdep.c (saved_pc_after_call): frame_saved_pc ->
FRAME_SAVED_PC.
* (frame_saved_pc): Change name to hppa_frame_saved_pc.
* (hppa_pop_frame): Don't use a pid of 0 with target_write_pc.
Use write_pc instead, which uses the correct pid.
* (target_read_pc target_write_pc): Use read/write_register_pid
instead of read/write_register to preserve the pid passed in.
* inftarg.c (child_can_run): Add flag child_suppress_run to allow
hpux-threads.c to override this as a runnable target.
* config/pa/nm-hppah.h: Define target_new_objfile and
target_pid_to_str.
* config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc
instead of frame_saved_pc.
* config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb.
* config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since
we can't easily determine the start file bounds with ELF.
* config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb.
* hpux-thread.c: New file for HPUX/OSF thread support.
* osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h
RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h
cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h
cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h
cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF
thread support.
* configure.in: Add stdlib.h to AC_CHECK_HEADERS. Call
BFD_NEED_DECLARATION on malloc, realloc, and free.
* acconfig.h: Add NEED_DECLARATION_MALLOC,
NEED_DECLARATION_REALLOC, and NEED_DECLARATION_FREE.
* configure, config.in: Rebuild.
* defs.h: Include <stddef.h> and <stdlib.h> based on HAVE_*_H
rather than __STDC__. Only declare malloc, realloc, and free if
NEED_DECLARATION_* is defined.
* gdbtk.c (mainWindow): Deleted.
(cleanup_init): Don't destroy main window.
(gdbtk_init): Main window now created by Tk_Init.
* configure.in: Most X checks now handled automatically by Tk.
Use new macros to find Tcl/Tk.
* aclocal.m4: New version for new Tcl/Tk; from Don Libes.
* config.in, configure: Regenerated.
* Makefile.in (TCL, TCL_CFLAGS, TK, TK_CFLAGS, X11_CFLAGS,
X11_LDFLAGS, X11_LIBS): Changed for new Tcl and Tk.
config/sparc/nm-sun4sol2.h config/sparc/sun4sol2.mh
config/sparc/tm-sun4sol2.h: Use autoconf to config Solaris thread
and pthread support, since pre-2.5 systems don't come with
libthread_db.so.1.
* procfs.c (info_proc): Use int instead of id_t. Old versions of
Irix don't see to define this.
* configure.in (AC_CHECK_FUNCS): Also check for sbrk.
* configure: Regenerate with autoconf.
* config.in: Regenerate with autoheader.
* main.c (main): Only use sbrk() when HAVE_SBRK is defined.
* top.c (command_loop): Ditto.
* configure.in (AC_CHECK_HEADERS): check for endian.h.
Use AC_CHECK_TOOL to find AR & RANLIB. Add AC_PROG_AWK.
Add host & target cases for i[345]86-*-gnu*.
* config.in: Regenerate with autoheader.
* configure: Regenerate with autoconf.
* Makefile.in (AR, AWK): Set from corresponding autoconf substs.
(init.c): Don't scan mig-generated files.
* defs.h (endian.h): Include if HAVE_ENDIAN_H defined.
* config/nm-m3.h (ATTACH_NO_WAIT): Define.
* infcmd.c (attach_command): Use "#ifndef ATTACH_NO_WAIT"
rather than "#ifndef MACH".
* config.in: Regenerate with autoheader.
* configure: Regenerate with autoconf.
* inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL
if it is actually defined.
(gdb_setpgid): Use HAVE_SETPGID.
* ch-exp.c: Change include of <string.h> to "gdb_string.h".
* c-exp.y: Ditto.
* f-exp.y: Ditto.
* m2-exp.y: Ditto.
* c-exp.y: Include <ctype.h>.
* serial.c: Ditto.
* config/m68k/nm-news.h: Add typedef for pid_t which is
apparently missing from <sys/types.h>. Enclose entire
file in NM_NEWS_H ifndef and define when included.
* config/mips/nm-news-mips.h: Ditto.
* config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL,
REGISTER_CONVERT_TO_RAW): Change name of temporary variable.
long doubles or not and define PRINTF_HAS_LONG_DOUBLE if so.
* acconfig.h: Provide default undef for PRINTF_HAS_LONG_DOUBLE.
* configure: Regenerate.
* valprint.c (print_floating): Use PRINTF_HAS_LONG_DOUBLE.
* c-exp.y (parse_number): Use PRINTF_HAS_LONG_DOUBLE.
* configure.in: Fix have_gregset and have_fpregset autoconf
variable names so that they match the pattern required to
cache them.
* configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
Change CONFIG_HEADERS test in AC_OUTPUT accordingly.
* configure: Rebuild.
* Makefile.in (stamp-h): Depend upon config.in, not config.h.in.
Set CONFIG_HEADERS to config.h:config.in.
The file name config.h.in can be used on DOS filesystems.