source files.
* breakpoint.c (resolve_sal_pc): Prevent crash when pc isn't
associated with a function.
* buildsym.c (record_line start_symtab end_symtab): Don't delete
symtabs which only have line numbers (but no other debug symbols).
* dbxread.c (read_dbx_symtab end_psymtab): Ditto.
* remote-sim.c: New functions gdbsim_insert/remove_breakpoint. Use
intrinsic simulator breakpoints if available, otherwise do it the
hard way.
* configure.tgt: Add d30v.
* d30v-tdep.c: New file.
* config/d30v/d30v.mt, config/d30v/tm-d30v.h: New files.
(end_psymtab): Use MSYMBOL_SIZE to extract size from minimal symbol.
* elfread.c (elf_symtab_read): If ELF symbol is "special",
such as a MIPS16 function, mark minimal symbol as special too.
* mips-tdep.c (pc_is_mips16): New function to check whether
a function is MIPS16 by looking at the minimal symbol. Use
pc_is_mips16 throughout instead of IS_MIPS16_ADDR macro.
* config/mips/tm-mips.h (SYMBOL_IS_SPECIAL, MAKE_MSYMBOL_SPECIAL,
MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): New functions for setting/testing
"special" MIPS16 bit in ELF and minimal symbols.
* mdebugread.c (parse_partial_symbols): Don't construct a partial
symbol table for a file that already has one.
start-sanitize-tx19
* configure.tgt: Support TX19.
* config/mips/tm-tx19.h, config/mips/tm-tx19l.h, config/mips/tx19.mt,
config/mips/tx19l.mt: New files for TX19.
end-sanitize-tx19
* config/tic80/tic80.mt:
(GDBSERVER-DEPFILES, GDBSERVER_LIBS): Define for gdbserver.
(SIM): Remove -lm to prevent make errors.
* configure.tgt: add gdbserver to configdirs for tic80.
end-sanitize-tic80
* gdbserver/utils.c (error): Change prototype to match defs.h.
* gdbserver/low-sim.c: Change simulator calls to use new interface.
* remote.c (remote_write_bytes): Include '$' at start of packet
and checksum at end of packet in overhead calculation.
New UnixWare 2.1 configuration
* config/i386/i386v42mp.mt: new
* config/i386/i386v42mp.mh: new
* config/i386/tm-i386v42mp.h: new
* config/i386/nm-i386v42mp.h: new
* configure.tgt: added new entries
* configure.host: added new entries
Start mn10200 gdb port by adding copies of mn10300
target-specific files with all instances of mn10300 changed
to mn10200 to start with.
* mn10200-tdep.c: new
* config/mn10200/tm-mn10200.h: new, REGISTER_SIZE is 24 bits not 32,
SP_REGNUM and FP_REGNUM are different, also no lar or lir.
* config/mn10200/mn10200.mt: new
* configure.tgt: add mn10200 entry
ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
and CONFIG_OBS.
* configure configure.in: Clean up test cases around thread support.
start-sanitize-v850
* configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
host is Windows.
end-sanitize-v850
* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
printcmd.c valops.c value.h values.c: Add bfd_section arg to
value_at and value_at_lazy.
* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
Add bfd_section arg to prim_record_minimal_symbol_and_info.
* corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
instead of read_memory. It takes a bfd_section arg.
* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
unnecessary cast for assignment of struct dbx_symfile_info.
Struct objfile now uses a real pointer instead of PTR for this
element.
* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
text, data and bss into dbx_symfile_info.
* exec.c (xfer_memory): Handle transfers for user-specified
sections.
* findvar.c (read_var_value locate_var_value): Copy bfd section
from the symbol to the value.
* gdb-stabs.h: Add section pointers for text, data and bss
sections.
* maint.c (translate address command): Add test code for overlay
address translation.
* printcmd.c (do_examine do_one_display): Now takes a bfd section
arg.
* (print_formatted x_command): Record current section along with
current address for repeated commands.
* sparc-nat.c (fetch_inferior_registers): Change
target_xfer_memory to target_{read write}_memory to allow changes
to target_xfer_memory interface for section info.
* symmisc.c (dump_msymbols print_symbol): Print section
assocaited with symbol.
* symtab.c (fixup_symbol_section): New routine to
add section info to symbols returned by lookup_symbol.
* symtab.h (struct general_symbol_info): Add bfd section to
symbols.
* target.c target.h (target_xfer_memory): Add bfd section to
args.
* (target_read_memory_section): New routine to read data from a
specific section.
* (target_memory_bfd_section): New global variable to pass bfd
section in to targets.
* valarith.c (value_add value_addr value_array): Preserve bfd
section when computing new value.
* value.h (struct value): Add bfd section to values.
* values.c (allocate_value value_copy): Initialize/preserve bfd
section.
* (unpack_double): Clean up _MSC_VER conditionals to remove
duplicate code.
start-sanitize-v850
* v850ice.c: New module to support communication with NEC's
PC-based ICE.
* config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
ep names with rxx names. sp and fp are renamed via a different
mechanism.
end-sanitize-v850
* config.in, configure.in, configure: Check for <objlist.h>.
* configure.tgt: Handle mips*-sgi-irix6* like irix5 for now.
* cp-valprint.c (cp_print_value_fields): Use SYMBOL_VALUE_ADDRESS
instead of SYMBOL_BLOCK_VALUE to get the address of a static member.
* dwarf2read.c: Turn warnings and recoverable errors into complaints,
add new complaints where appropriate.
gcc -Wall cleanup.
(struct line_head): Change line_base from char to int to avoid
problems with compilers whose plain char is represented by an
unsigned char.
(struct partial_die_info): Add is_declaration field.
(dwarf2_tmp_obstack): New obstack for allocating temporary storage
used during symbol reading.
(cu_header_offset): New variable for resolving relative reference
dies.
(optimized_out, basereg, islocal, frame_base_reg, frame_base_offset):
New interface variables for decode_locdesc.
(struct dwarf2_pinfo): New structure for communication between
psymtab and symtab reading, passed via pst->read_symtab_private.
(dwarf2_has_info, dwarf2_build_psymtabs): Accept objects files
without line number sections.
(dwarf2_build_psymtabs_hard): Initialize temporary obstack
for symbol reading.
Allocate and initialize pst->read_symtab_private.
Relocate pst->textlow and pst->texthigh with baseaddr.
(scan_partial_symbols): Do not add DW_AT_declaration symbols
to the partial symbol table.
Add file scope enumerator symbols to the partial symbol table.
Fix typo in highpc computation.
If we didn't find a lowpc, set it to highpc to avoid complaints
from `maint check.
(add_partial_symbol): Relocate symbol values with baseaddr.
Add static DW_TAG_subprogram and DW_TAG_variable symbols to the
minimal symbol table.
Obtain symbol values for DW_TAG_variable symbols from the location
descriptor, skip symbols with missing location desciptors.
Skip symbols for aggregate types without children.
Handle enumerator symbols.
(dwarf2_psymtab_to_symtab): Issue symbol reading message if verbose.
(psymtab_to_symtab_1): Set local variables from
pst->read_symtab_private, set cu_header_offset and baseaddr.
Initialize temporary obstack for symbol reading, initialize
buildsym and add a cleanup to really_free_pendings.
Relocate highpc with baseaddr when calling end_symtab.
If the compilation is from a C file generated by language
preprocessors, do not set the symtab language if it was already
deduced by start_subfile.
Removed verbose sorting symbol table message.
(process_die): Handle DW_TAG_ptr_to_member_type and
DW_TAG_reference_type.
Use read_subroutine_type to get the function type for
DW_TAG_subprogram before calling read_func_scope.
(read_file_scope): Initialize file name to <unknown>, start_subfile
expects a non-NULL name.
If we didn't find a lowpc, set it to highpc to avoid complaints
from finish_symbol.
Relocate lowpc and highpc with baseaddr.
Get rid of Irix6.2 native cc compile machine prefix in comp_dir.
Zero out ftypes for each new compilation unit (may be different
language or different objfile).
Accept compilation units without line number information, pass
comp_dir to decode_lines.
(read_func_scope): Initialize function name to <unknown> to avoid
core dumps when DW_AT_name is missing.
Relocate lowpc and highpc with baseaddr.
Handle DW_AT_frame_base, keep result for DW_OP_fbreg operations.
Pass function type to new_symbol.
(read_lexical_block_scope): Relocate lowpc and highpc with baseaddr.
(read_structure_scope): Set TYPE_TAG_NAME, not TYPE_NAME.
Handle DW_TAG_class_type.
Copy fields to type_obstack, release temporary storage for fields.
Don't add symbol if die is a stub die and has no children.
Handle C++ static member fields.
(read_enumeration): Set TYPE_TAG_NAME, not TYPE_NAME.
Copy fields to type_obstack, release temporary storage for fields.
Let new_symbol handle the symbol creation for enumerators
instead of handcrafting a symbol.
Determine signedness of enum type from enumerators.
(dwarf_read_array_type): Handle variable length arrays.
Use lookup_pointer_type instead of handcrafting a type.
Create array type only if a DW_TAG_subrange_type was found.
(read_tag_pointer_type, read_tag_reference_type):
Use lookup_pointer_type and lookup_reference_type instead
of handcrafting a type.
(read_tag_ptr_to_member_type): New function to handle
DW_TAG_ptr_to_member_type.
(read_subroutine_type): Handle parameter dies.
Use lookup_function_type instead of handcrafting a type.
(read_typedef): Allocate a TYPE_CODE_TYPEDEF type for the typedef.
(read_base_type): If the type has a name, use init_type to create
a new type instead of second guessing a fundamental type.
(read_comp_unit): Reset die reference table before building
a new one.
(dwarf2_read_section): Read section contents into psymbol_obstack.
(dwarf2_read_abbrevs): Handle unterminated abbreviations
for a compile unit gracefully.
(read_partial_die): Zero partial die before reading its info.
Handle DW_AT_declaration.
Fix typo in handling of DW_FORM_block4.
(read_full_die): Fix typo in handling of DW_FORM_block4.
(read_1_signed_byte, read_2_signed_bytes, read_4_signed_bytes):
New routines to get signed values from a buffer.
(read_n_bytes, read_string): Allocate storage from the temporary
obstack. If the host char size permits it, return pointer
to buffer instead of allocating storage.
(set_cu_language): Handle DW_LANG_Mips_Assembler.
(dwarf_attr): Return NULL if reference die for DW_AT_specification
or DW_AT_abstract_origin die is not found.
(record_minimal_symbol): Removed, replaced with a direct call to
prim_record_minimal_symbol, it now handles saving the string itself.
(convert_locdesc): Removed, partial symtab reading now uses
decode_locdesc.
(dwarf_attr): Use dwarf2_get_ref_die_offset to get the absolute
offset for the die reference.
(dwarf_decode_lines): Complain if the line section info is missing.
Use read_1_signed_byte to extract lh.line_base to avoid
problems with compilers whose plain char is represented by an
unsigned char.
Add cleanups for allocated temporary storage.
Start a subfile for the first file in the state machine.
Fix off by one problem with dirs.dirs access.
Use comp_dir when directory index is 0.
Support multiple sequences (from Jason Merrill <jason@cygnus.com>).
(dwarf2_start_subfile): Try to keep line numbers from identical
absolute and relative file names in a common subfile.
(new_symbol): Allocate symbol and symbol name on the symbol_obstack.
Set SYMBOL_LINE from DW_AT_decl_line if present.
Set SYMBOL_TYPE from passed type if not NULL.
Change DW_TAG_variable symbol types with missing type entries
to a sensible type.
Handle optimized_out, offreg and islocal storage classes.
Add external symbols with type information whose address isn't
known as LOC_UNRESOLVED symbols.
Synthesize typedefs for C++ classes, structs, unions and enumerations.
Handle DW_TAG_enumerator symbols, complain for unrecognized
symbol tags.
(die_type): A missing DW_AT_type represents a void type.
Use dwarf2_get_ref_die_offset to get the absolute offset for
the die reference.
(die_containing_type): New function to build type from
DW_AT_containing_type attribut.
(read_type_die): Handle DW_TAG_ptr_to_member_type.
Treat DW_TAG_subprogram like DW_TAG_subroutine_type.
(dwarf_base_type): Fix typo with creation of FT_UNSIGNED_SHORT
fundamental type.
(create_name): Removed, symbol name allocation is now done
in new_symbol.
(dump_die): Use print_address_numeric to print a CORE_ADDR.
(dwarf2_empty_die_ref_table): New function to clear the die
reference table.
(dwarf2_get_ref_die_offset): New function to get the absolute
die offset from a die reference attribute.
(decode_locdesc): Complete rewrite using a stack, code mostly
borrowed from dwarfread.c:locval.
(dwarf_alloc_type): Removed, replaced by direct calls to alloc_type.
(dwarf_alloc_block): Allocate block on temporary obstack.
* elfread.c (elf_symtab_read): When handling Irix dynamic symbols,
skip section name symbols and relocate all others.
(elf_symfile_read): Build dwarf2 psymtab even if offset is non-zero.
* irix5-nat.c (fetch_core_registers): Handle core_reg_sect
from N32 executables. Call registers_fetched after extracting
the registers.
(obj_list_variant, struct link_map, LM_OFFSET, LM_ADDR): New
definitions to enable support of O32 and N32 format objlists.
(struct so_list): New members offset, so_name and lmstart to
eliminate dependencies from the objlist format used.
(solib_map_sections, symbol_add_stub, solib_add,
info_sharedlibrary_command, solib_address, clear_solib): Use
so_name and LM_OFFSET.
(first_link_map_member): Rewrite to enable support of O32 and N32
format objlists.
(next_link_map_member, xfer_link_map_member): New functions to
support O32 and N32 format objlists.
(find_solib): Use first_link_map_member, next_link_map_member and
xfer_link_map_member.
(solib_create_inferior_hook): Use TARGET_SIGNAL_* instead of
host signal numbers.
* mdebugread.c (parse_partial_symbols, handle_psymbol_enumerators):
Pass CORE_ADDR variant to add_psymbol_to_list.
* mips-tdep.c (heuristic_proc_desc): Stop examining the prologue
if we encounter a positive stack adjustment. Handle `move $30,$sp'.
Handle `sd reg,offset($sp)' for 32 bit ABIs.
* symmisc.c (dump_msymbols, print_partial_symbols): Use
print_address_numeric to print a SYMBOL_VALUE_ADDRESS.
(dump_symtab): Print compilation directory if it is not NULL.
* valops.c (search_struct_field, value_struct_elt_for_reference):
Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the
address of a static member.
* m32r-tdep.c: Improved frame_chain and fn prologue analysis.
* configure.tgt: Add entry for m32r target.
* monitor.h: Add a flag to tell monitor_store_register to use
(val, regno) instead of (regno, val).
* monitor.c: Make monitor_store_register honor the above flag.
Make monitor_exp ignore DC1/DC3 for m32r.
Increase buf size in monitor_dump_regs.
markers correctly; this fixes problem on Vr5000 where all
functions in a module had the same address.
* configure.in, configure.tgt, configure.host, gdbserver/configure.in:
Correct for pc-linux-gnu problem in config.guess.
* configure: Regenerate.
Andrew Cagney