Not much to see here, just reduce the number of calls to S_GET_VALUE
and symbol_symbolS in the comparison functions.
* config/tc-xtensa.c (xg_order_trampoline_chain_entry): Don't
call S_GET_VALUE multiple times for a symbol. Rearrange code
so it is obvious what is the primary sort key.
(xg_order_trampoline_chain): Similarly.
md_begin happens after md_parse_option.
* config/tc-xtensa.c (opt_linkrelax): New variable.
(md_parse_option): Set it here.
(md_begin): Copy opt_linkrelax to linkrelax.
gas/
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_literal_pseudo): Drop code that has
no effect.
(get_literal_pool_location): Only search for the literal pool
when auto litpools is used, otherwise take one recorded in the
tc_segment_info_data.
(xtensa_assign_litpool_addresses): New function.
(xtensa_move_literals): Don't duplicate 'literal pool location
required...' error message. Call xtensa_assign_litpool_addresses.
Provide literal position at the beginning of each section for literal
space reserved by relaxations when text-section-literals or
auto-litpools options are used. Remove code that adds fill frag to the
literal section for every .literal_position directive to avoid creation
of empty literal sections.
Fix auto-litpools tests that got literal pool address changes.
gas/
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_is_init_fini): Add declaration.
(xtensa_mark_literal_pool_location): Don't add fill frag to literal
section that records literal pool location.
(md_begin): Call xtensa_mark_literal_pool_location when text
section literals or auto litpools are used.
(xtensa_elf_section_change_hook): Call
xtensa_mark_literal_pool_location when text section literals or
auto litpools are used, there's no literal pool location defined
for the current section and it's not .init or .fini.
* testsuite/gas/xtensa/auto-litpools-first1.d: Fix up addresses.
* testsuite/gas/xtensa/auto-litpools-first2.d: Likewise.
* testsuite/gas/xtensa/auto-litpools.d: Likewise.
Loop opcode relaxation that uses addi/addmi doesn't work well with other
relaxations that may cause code movement. Instead of encoding fixed loop
end offset in the relaxed sequence use l32r or a pair of const16 to load
loop end address. This way the address of the loop end gets a relocation
record and it gets updated appropriately.
gas/
2019-04-03 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (convert_frag_immed): Drop
convert_frag_immed_finish_loop invocation.
(convert_frag_immed_finish_loop): Drop declaration and
definition.
* config/xtensa-relax.c (widen_spec_list): Replace loop
widening that uses addi/addmi with widening that uses l32r
and const16.
xtensa gas chokes on 8/16 bit data entries representing constant symbols
because it leaves BFD_RELOC_8/BFD_RELOC_16 fixups for which xtensa BFD
cannot emit relocations. Resolve fixups for constant symbols in
md_apply_fix.
gas/
2019-01-28 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (md_apply_fix): Mark fixups for constant
symbols as done in md_apply_fix.
* testsuite/gas/all/forward.d: Don't XFAIL for xtensa.
This file was never supposed to be widely used. The fact that it has
found its way into many gas files led to bugs, typically when code
expecting a symbolS* to point at a struct symbol is presented with a
struct local_symbol. Also, commit 158184ac9e changed these structs in
2012 but didn't catch all places where symbol bsym was being used to
test for a local_symbol.
* Makefile.am (HFILES): Delete struc-symbol.h.
* doc/internals.texi: Delete struc-symbol.h reference and out
of date local symbol description.
* struc-symbol.h: Delete. Move contents to..
* symbols.c: ..here.
(symbol_on_chain, symbol_symbolS): New functions.
* symbols.h (symbol_on_chain, symbol_symbolS): Declare.
* cgen.c: Don't #include struc-symbol.h.
(gas_cgen_parse_operand): Don't test for local_symbol using
bsym, instead call symbol_symbolS. Use symbol_get_bfdsym.
(weak_operand_overflow_check, make_right_shifted_expr): Use
symbol accessors.
* config/obj-coff.c: Don't #include struc-symbol.h.
(GET_FILENAME_STRING): Delete.
* config/obj-elf.c: Don't #include struc-symbol.h.
(elf_file_symbol): Use symbol accessors.
(elf_adjust_symtab): Call symbol_on_chain.
* config/obj-evax.c: Don't #include struc-symbol.h.
* config/tc-nds32.c: Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c: Likewise.
* config/tc-alpha.c: Likewise.
(add_to_link_pool, s_alpha_comm): Use symbol accessors.
* config/tc-arc.c: Don't #include struc-symbol.h.
(arc_check_relocs): Use symbol accessors, testing gas symbol
section rather than bfd symbol section.
* config/tc-avr.c: Don't #include struc-symbol.h.
(avr_patch_gccisr_frag): Use symbol accessors.
* config/tc-bfin.c: Don't #include struc-symbol.h.
(bfin_loop_beginend): Use symbol accessors.
* config/tc-csky.c: Don't #include struc-symbol.h.
(v2_work_movih, v2_work_ori): Use symbol accessors. Check for
absolute symbol as well as O_constant.
* config/tc-riscv.c: Don't #include struc-symbol.h.
(riscv_pre_output_hook): Use symbol accessors.
* config/tc-s390.c: Don't #include struc-symbol.h.
(s390_literals): Use symbol accessors.
* config/tc-score.c (s3_build_la_pic, s3_build_lwst_pic): Use
symbol accessors.
(s3_relax_branch_inst16, s3_relax_cmpbranch_inst32): Don't
test symbol bsym.
* config/tc-score7.c: Don't #include struc-symbol.h.
(s7_build_la_pic, s7_build_lwst_pic): Use symbol accessors.
(s7_b32_relax_to_b16): Don't test symbol bsym.
* config/tc-sh.c: Don't #include struc-symbol.h.
(insert_loop_bounds): Use symbol accessors.
(sh_frob_section): Remove bogus symbol canonicalization.
* config/tc-tic54x.c: Don't #include struc-symbol.h.
(tic54x_bss): Use symbol accessors.
* config/tc-tilegx.c: Don't #include struc-symbol.h.
(emit_tilegx_instruction, tilegx_parse_name): Use symbol accessors.
* config/tc-tilepro.c: Don't #include struc-symbol.h.
(emit_tilepro_instruction, tilepro_parse_name): Use accessors.
* config/tc-xtensa.c: Don't #include struc-symbol.h.
(xg_assemble_vliw_tokens): Use symbol accessors.
(xg_order_trampoline_chain): Likewise.
* ehopt.c: Don't #include struc-symbol.h.
(check_eh_frame): Correct local symbol test. Use symbol accessors.
* write.c: Don't #include struc-symbol.h.
(create_note_reloc, maybe_generate_build_notes): Use symbol accessors.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
It is currently not possible to correctly match .xt.prop information
for sections with identical VMA. Allow creation of separate property
sections in the BFD. Add assembler option --separate-prop-tables to
allow creation of separate property sections.
2018-06-04 Volodymyr Arbatov <arbatov@cadence.com>
bfd/
* elf32-xtensa.c (elf32xtensa_separate_props): New global
variable.
(xtensa_add_names): New function.
(xtensa_property_section_name): Add new parameter
separate_sections, use it to choose property section name.
(xtensa_get_separate_property_section): New function.
(xtensa_get_property_section): Invoke
xtensa_get_separate_property_section to get individual property
section if it exists, common property section otherwise.
(xtensa_make_property_section): Pass elf32xtensa_separate_props
to xtensa_property_section_name.
gas/
* config/tc-xtensa.c (elf32xtensa_separate_props): New
declaration.
(option_separate_props, option_no_separate_props): New
enumeration constants.
(md_longopts): Add separate-prop-tables option.
(md_parse_option): Add cases for option_separate_props and
option_no_separate_props.
(md_show_usage): Add help for [no-]separate-prop-tables options.
Not all literals need to be moved in the presence of
--text-section-literals or --auto-litpools, but only those created by
.literal pseudo op or generated as a result of relaxation. Attempts to
move other literals may result in abnormal termination of the assembler
due to the following assertion failure:
Internal error in xg_find_litpool at gas/config/tc-xtensa.c:11209.
The same assertion may also be triggered by attempting to assign literal
pools to literals in .init and .fini sections; don't try to do that.
gas/
2018-05-09 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_is_init_fini): New function.
(xtensa_move_literals): Only attempt to assign literal pool to
literals with tc_frag_data.is_literal mark and not in .init or
.fini sections.
Join nested 'if' conditions to simplify function structure.
(xtensa_switch_to_non_abs_literal_fragment): Use
xtensa_is_init_fini to test for .init/.fini sections.
* testsuite/gas/xtensa/all.exp (auto-litpools-3)
(auto-litpools-4, text-section-literals-1): New tests.
* testsuite/gas/xtensa/auto-litpools-3.d: New test results.
* testsuite/gas/xtensa/auto-litpools-3.s: New test source.
* testsuite/gas/xtensa/auto-litpools-4.d: New test results.
* testsuite/gas/xtensa/auto-litpools-4.s: New test source.
* testsuite/gas/xtensa/text-section-literals-1.d: New test results.
* testsuite/gas/xtensa/text-section-literals-1.s: New test source.
Literal movement code may grow auto litpool so big that it won't be
possible to jump around it. Limit the size of auto litpools by 1/2 of
the jump range.
gas/
2018-02-20 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (struct litpool_frag): Add new field
literal_count.
(MAX_AUTO_POOL_LITERALS, MAX_EXPLICIT_POOL_LITERALS)
(MAX_POOL_LITERALS): New macro definitions.
(auto_litpool_limit): Initialize to 0.
(md_parse_option): Set auto_litpool_limit in the presence of
--auto-litpools option.
(xtensa_maybe_create_literal_pool_frag): Zero-initialize
literal_count field.
(xg_find_litpool): New function. Make sure that found literal
pool size is within the limit.
(xtensa_move_literals): Extract literal pool search code into
the new function.
* testsuite/gas/xtensa/all.exp: Add auto-litpools-2 test.
* testsuite/gas/xtensa/auto-litpools-2.d: New file.
* testsuite/gas/xtensa/auto-litpools-2.s: New file.
* testsuite/gas/xtensa/auto-litpools.d: Fix up changed
addresses.
* testsuite/gas/xtensa/auto-litpools.s: Change literal value so
that objdump doesn't get out of sync.
For jumps requiring multiple trampolines trampoline placement code may
place multiple sequential trampolines into the same frag. Don't do that.
gas/
2018-02-13 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xg_find_best_trampoline): Skip trampoline
frag that contains source address.
Don't use address where symbol gets resolved, as during section
relaxation symbols will slide, instead canonicalize symbols and check
that they are are the same.
This fixes a bug when a relaxed jump goes into the wrong trampoline.
gas/
2017-12-07 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xg_order_trampoline_chain): Replace
xg_order_trampoline_chain_entry call with check for
canonicalized symbol equality and offset equality.
find_trampoline_seg takes noticeable time when assembling source with
many sections. Cache the result of the most recent search and check it
first. No functional changes.
gas/
2017-11-27 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (find_trampoline_seg): Add static variable
that caches the result of the most recent search.
There is a recurring pattern in assembly files generated by a compiler
where a lot of jumps in a function are going to the same place. When
these jumps are relaxed with trampolines the assembler generates a
separate jump thread from each source.
Create an index of trampoline jump targets for each segment and see if a
jump being relaxed goes to a location from that index, in which case
replace its target with a location of existing trampoline jump that
results in the shortest path to the original target.
gas/
2017-11-27 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (trampoline_chain_entry, trampoline_chain)
(trampoline_chain_index): New structures.
(trampoline_index): Add chain_index field.
(xg_order_trampoline_chain_entry, xg_sort_trampoline_chain)
(xg_find_chain_entry, xg_get_best_chain_entry)
(xg_order_trampoline_chain, xg_get_trampoline_chain)
(xg_find_best_eq_target, xg_add_location_to_chain)
(xg_create_trampoline_chain, xg_get_single_symbol_slot): New
functions.
(xg_relax_fixups): Call xg_find_best_eq_target to adjust jump
target to point to an existing jump. Call
xg_create_trampoline_chain to create new jump target. Call
xg_add_location_to_chain to add newly created trampoline jump
to the corresponding chain.
(add_jump_to_trampoline): Extract loop searching for a single
slot with a symbol into a separate function, replace that code
with a call to that function.
(relax_frag_immed): Call xg_find_best_eq_target to adjust jump
target to point to an existing jump.
* testsuite/gas/xtensa/all.exp: Add trampoline-2 test.
* testsuite/gas/xtensa/trampoline.d: Adjust absolute addresses
as many duplicate trampoline chains are now coalesced.
* testsuite/gas/xtensa/trampoline.s: Add _nop so that objdump
stays in sync with instruction stream.
* testsuite/gas/xtensa/trampoline-2.l: New test result file.
* testsuite/gas/xtensa/trampoline-2.s: New test source file.
There's almost exact copy of the trampoline placement code in the
search_trampolines function that is used for jumps generated for relaxed
branch instructions. Get rid of the duplication and reuse
xg_find_best_trampoline function for that.
gas/
2017-11-27 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (search_trampolines, get_best_trampoline):
Remove definitions.
(xg_find_best_trampoline_for_tinsn): New function.
(relax_frag_immed): Replace call to get_best_trampoline with a
call to xg_find_best_trampoline_for_tinsn.
* testsuite/gas/xtensa/trampoline.d: Adjust absolute addresses
as the placement of trampolines for relaxed branches has been
changed.
Replace linked list of trampoline frags with an ordered array, so that
instead of indexing fixups trampolines could be indexed. Keep each array
in the trampoline_seg structure, so there's no need to rebuild it for
every new processed segment. Don't run relaxation for each trampoline
frag, instead run it for each fixup in the current segment that needs
relaxation at the beginning of each relaxation pass. This way the
complexity of this process drops from about O(n^2 * m) to about
O(log n * m), where n is the number of trampoline frags and m is the
number of fixups that need relaxation in the segment.
gas/
2017-11-27 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (trampoline_index): New structure.
(trampoline_seg): Replace trampoline list with trampoline index.
(xg_find_trampoline, xg_add_trampoline_to_index)
(xg_remove_trampoline_from_index, xg_add_trampoline_to_seg)
(xg_is_trampoline_frag_full, xg_get_fulcrum)
(xg_find_best_trampoline, xg_relax_fixup, xg_relax_fixups)
(xg_is_relaxable_fixup): New functions.
(J_MARGIN): New macro.
(xtensa_create_trampoline_frag): Use xg_add_trampoline_to_seg
instead of open-coded addition to the linked list.
(dump_trampolines): Iterate through the trampoline_seg::index.
(cached_fixupS, cached_fixup, fixup_cacheS, fixup_cache)
(fixup_order, xtensa_make_cached_fixup)
(xtensa_realloc_fixup_cache, xtensa_cache_relaxable_fixups)
(xtensa_find_first_cached_fixup, xtensa_delete_cached_fixup)
(xtensa_add_cached_fixup, check_and_update_trampolines): Remove
definitions.
(xg_relax_trampoline): Extract logic into separate functions,
replace body with a call to xg_relax_fixups.
(search_trampolines): Replace search in linked list with search
in index. Change data type of address-tracking variables from
int to offsetT. Replace abs with labs.
(xg_append_jump): Finish the trampoline frag if it's full.
(add_jump_to_trampoline): Remove trampoline frag from the index
if the frag is full.
* config/tc-xtensa.h (xtensa_frag_type): Remove next_trampoline.
* testsuite/gas/xtensa/trampoline.d: Adjust absolute addresses
as the placement of trampolines has slightly changed.
* testsuite/gas/xtensa/trampoline.s: Add _nop so that objdump
stays in sync with instruction stream.
The split between fragS and trampoline_frag doesn't save much space, but
makes trampolines management much more awkward. Merge trampoline_frag
data into the xtensa_frag_type, which is a part of fragS. No functional
changes.
gas/
2017-11-27 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (init_trampoline_frag): Replace pointer to
struct trampoline_frag parameter with pointer to fragS.
(xg_append_jump): Remove jump_around parameter.
(struct trampoline_frag): Remove.
(struct trampoline_seg): Change type of trampoline_list from
struct trampoline_frag to fragS.
(xtensa_create_trampoline_frag): Don't allocate struct
trampoline_frag. Initialize new fragS::tc_frag_data fields.
(dump_trampolines, xg_relax_trampoline, search_trampolines)
(get_best_trampoline, init_trampoline_frag)
(add_jump_to_trampoline, relax_frag_immed): Replace pointer to
struct trampoline_frag with a pointer to fragS.
(xg_append_jump): Remove jump_around parameter, use
fragS::tc_frag_data.jump_around_fix instead.
(xg_relax_trampoline, init_trampoline_frag)
(add_jump_to_trampoline): Don't pass jump_around parameter to
xg_append_jump.
* config/tc-xtensa.h (struct xtensa_frag_type): Add new fields:
needs_jump_around, next_trampoline and jump_around_fix.
xtensa_create_trampoline_frag has opencoded fragment equivalent to
find_trampoline_seg. Drop the fragment and use find_trampoline_seg
instead. No functional changes.
gas/
2017-11-27 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (find_trampoline_seg): Move above the first
use.
(xtensa_create_trampoline_frag): Replace trampoline seg search
code with a call to find_trampoline_seg.
init_trampoline_frag, add_jump_to_trampoline and xg_relax_trampoline add
a jump to the end of a trampoline frag. Extract it into a separate
funciton and use it in all these places. No functional changes.
gas/
2017-11-27 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xg_append_jump): New function.
(xg_relax_trampoline, init_trampoline_frag)
(add_jump_to_trampoline): Replace trampoline jump assembling
code with a call to xg_append_jump.
To make measurement and changes easier extract trampoline relaxation
function. No functional changes.
gas/
2017-11-27 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xg_relax_trampoline): New function.
(xtensa_relax_frag): Replace trampoline relaxation code with a
call to xg_relax_trampoline.
Get rid of the assumption that XCHAL_* macros are preprocessor
constants: don't use them in preprocessor conditionals or in static
variable initializers.
2017-06-14 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (elf_xtensa_be_plt_entry,
elf_xtensa_le_plt_entry): Add dimension for the ABI to arrays,
keep both windowed and call0 ABI PLT definitions.
(elf_xtensa_create_plt_entry): Use selected ABI to choose upper
elf_xtensa_*_plt_entry endex.
(ELF_MAXPAGESIZE): Fix at minimal supported MMU page size.
gas/
* config/tc-xtensa.c (density_supported, xtensa_fetch_width,
absolute_literals_supported): Leave definitions uninitialized.
(directive_state): Leave entries for directive_density and
directive_absolute_literals initialized to false.
(xg_init_global_config, xtensa_init): New functions.
* config/tc-xtensa.h (TARGET_BYTES_BIG_ENDIAN): Define as 0.
(HOST_SPECIAL_INIT): New definition.
(xtensa_init): New declaration.
* config/tc-xtensa.c (xtensa_maybe_create_literal_pool_frag):
Initialize lps->frag_count with auto_litpool_limit.
(xg_promote_candidate_litpool): New function.
(xtensa_move_literals): Extract candidate litpool promotion code
into separate function. Call it for all possible found
candidates.
(xtensa_switch_to_literal_fragment): Drop 'recursive' flag and
call to xtensa_mark_literal_pool_location that it guards.
Replace it with call to xtensa_maybe_create_literal_pool_frag.
Initialize pool_location with created literal pool candidate.
* testsuite/gas/xtensa/all.exp: Add new tests.
* testsuite/gas/xtensa/auto-litpools-first1.d: New test results.
* testsuite/gas/xtensa/auto-litpools-first1.s: New test.
* testsuite/gas/xtensa/auto-litpools-first2.d: New test results.
* testsuite/gas/xtensa/auto-litpools-first2.s: New test.
* testsuite/gas/xtensa/auto-litpools.d: Fix offsets changed due
to additional jump instruction.
add_jump_to_trampoline assumes that jump instruction is in slot 0,
when it's in other slot that results in fixup that references NULL symbol,
which results in segfault later in xtensa_make_cached_fixup.
Search for the non-NULL symbol in the tc_frag_data.slot_symbols and check
that there's exactly one such slot.
xtensa_relax_frag for RELAX_TRAMPOLINE reassigns fixup from the original
instruction with jump to generated jump in the trampoline frag, but does not
fix its fx_r_type or fx_size. That results in "undecodable fix" or
"fixup not contained within frag" error messages during relaxation.
Fix both these fields.
gas/
2017-03-22 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_relax_frag): Change fx_size of the
reassigned fixup to size of jump instruction (3) and fx_r_type
to BFD_RELOC_XTENSA_SLOT0_OP, as there's only one slot.
(add_jump_to_trampoline): Search
origfrag->tc_frag_data.slot_symbols for the slot with non-NULL
symbol and use that slot instead of slot 0.
There's no reason to define these macros twice.
gas/ChangeLog:
2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-xtensa.c: Include elf/xtensa.h.
It always returns an element of the enum operatorT, so it should be clearer to
make that the return type.
gas/ChangeLog:
2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-xtensa.c (struct suffix_reloc_map): Change type of field
operator to operatorT.
(map_suffix_reloc_to_operator): Change return type to operatorT.
Xtensa uses it in several macros passing it a literal string, so its convenient
for the argument type to be const char *. However some of the code in
symbols.c seems to assume tc_canonicalize_symbol_name () will return a non
const pointer, and some other target's implementations even modify the
argument, so it seems best to return a char * which means casting away const on
the argument when we return it instead of another string.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-xtensa.c (struct rename_section_struct): Make old_name
const.
(xtensa_section_rename): Make argument type const char *.
* config/tc-xtensa.h (xtensa_section_rename): Adjust.
Despite the documentation and the comment in xtensa_move_literals, in
the presence of --text-section-literals and --auto-litpools literals are
moved from the separate literal sections into .init and .fini, because
the check in the xtensa_move_literals is incorrect.
This moving was broken with introduction of auto litpools: some literals
now may be lost. This happens because literal frags emitted from .init
and .fini are not closed when new .literal_position marks new literal
pool. Then frag_align(2, 0, 0) changes type of the last literal frag to
rs_align. rs_align frags are skipped in the xtensa_move_literals. As a
result fixups against such literals are not moved out of .init.literal/
.fini.literal sections producing the following assembler error:
test.S: Warning: fixes not all moved from .init.literal
test.S: Internal error!
Fix check for .init.literal/.fini.literal in the xtensa_move_literals
and don't let it move literals from there in the presence of
--text-section-literals or --auto-litpools.
2016-02-17 Max Filippov <jcmvbkbc@gmail.com>
gas/
* config/tc-xtensa.c (xtensa_move_literals): Fix check for
.init.literal/.fini.literal section name.
* testsuite/gas/xtensa/all.exp: Add init-fini-literals to the
list of xtensa tests.
* testsuite/gas/xtensa/init-fini-literals.d: New file:
init-fini-literals test result patterns.
* testsuite/gas/xtensa/init-fini-literals.s: New file:
init-fini-literals test.
Change 1058c7532d "Use signed data type for R_XTENSA_DIFF* relocation
offsets." changed signedness of BFD_RELOC_XTENSA_DIFF* relocations
substituted for BFD_RELOC_*. This made it impossible to encode arbitrary
8-, 16- and 32-bit values, which broke e.g. debug info encoding by .loc
directive. Revert this part and add test.
gas/
2016-02-03 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (md_apply_fix): Mark BFD_RELOC_XTENSA_DIFF*
substitutions for BFD_RELOC_* as unsigned.
* gas/testsuite/gas/xtensa/all.exp: Add loc to list of xtensa
tests.
* gas/testsuite/gas/xtensa/loc.d: New file: loc test result
patterns.
* gas/testsuite/gas/xtensa/loc.s: New file: loc test.