Will Newton
c623a6ef72
gdbserver, aarch64: Zero out regs in aarch64_linux_set_debug_regs.
...
Apply the same fix that was applied to aarch64-linux-nat.c.
2013-09-16 Will Newton <will.newton@linaro.org>
* linux-aarch64-low.c (aarch64_linux_set_debug_regs): Zero
out regs.
2013-09-16 14:22:19 +00:00
Pierre Muller
04a83fee11
* arm-linux-tdep.c: Add "elf/common.h" header.
...
Remove AT_HWCAP macro definintion as it is provided in
added include file.
* s390-tdep.c: Remove system header <elf.h>
Add "elf/common.h" header for AT_HWCAP definition.
(s390_core_read_description): Use correct CORE_ADDR
for hwcap local variable used as third parameter
of function target_auxv_search.
2013-09-16 11:28:53 +00:00
Will Newton
1d50d57ca2
gas/config/tc-arm.c: Fix parsing of NEON load/store element sizes.
...
The existing code would accept VLD2.64 and similar undefined
instructions.
gas/ChangeLog:
2013-09-16 Will Newton <will.newton@linaro.org>
* config/tc-arm.c (do_neon_ld_st_interleave): Add constraint
disallowing element size 64 with interleave other than 1.
gas/testsuite/ChangeLog:
2013-09-16 Will Newton <will.newton@linaro.org>
* gas/arm/neon-ldst-es.d: Add VLD1.64 instructions.
* gas/arm/neon-ldst-es.s: Likewise.
* testsuite/gas/arm/neon-ldst-es-bad.d: New file.
* testsuite/gas/arm/neon-ldst-es-bad.l: Likewise.
* testsuite/gas/arm/neon-ldst-es-bad.s: Likewise.
2013-09-16 09:34:30 +00:00
Alan Modra
fe75ecec82
daily update
2013-09-16 00:00:04 +00:00
Alan Modra
605e29cd82
daily update
2013-09-15 00:00:04 +00:00
Pierre Muller
88505fac1c
* common/filestuff.c (gdb_fopen_cloexec): Do not try to use "e"
...
mode if operating system doesn't know O_CLOEXEC.
2013-09-14 06:26:35 +00:00
Alan Modra
556a4ec59c
daily update
2013-09-14 00:00:04 +00:00
Jan Kratochvil
d3846e71a9
Code cleanup: Move variable.
...
gdb/
2013-09-13 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* symfile.c (reread_symbols): Move variable obfd_filename to a more
inner block.
2013-09-13 14:21:03 +00:00
Ulrich Weigand
4ac33720d6
gdb/ChangeLog:
...
2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* NEWS: Mention TDB support.
* features/s390-tdb.xml: New file.
* features/s390-te-linux64.xml: New file.
* features/s390x-te-linux64.xml: New file.
* features/Makefile (WHICH): Add new tdescs above.
(s390-te-linux64-expedite): Set.
(s390x-te-linux64-expedite): Set.
* features/s390-te-linux64.c: New file (generated).
* features/s390x-te-linux64.c: New file (generated).
* regformats/s390-te-linux64.dat: New file (generated).
* regformats/s390x-te-linux64.dat: New file (generated).
* s390-tdep.h (HWCAP_S390_HIGH_GPRS): Define.
(HWCAP_S390_TE): Likewise.
(S390_TDB_DWORD0_REGNUM): Likewise.
(S390_TDB_DWORD0_REGNUM): Likewise.
(S390_TDB_ABORT_CODE_REGNUM): Likewise.
(S390_TDB_CONFLICT_TOKEN_REGNUM): Likewise.
(S390_TDB_ATIA_REGNUM): Likewise.
(S390_TDB_R0_REGNUM): Likewise.
(S390_TDB_R1_REGNUM): Likewise.
(S390_TDB_R2_REGNUM): Likewise.
(S390_TDB_R3_REGNUM): Likewise.
(S390_TDB_R4_REGNUM): Likewise.
(S390_TDB_R5_REGNUM): Likewise.
(S390_TDB_R6_REGNUM): Likewise.
(S390_TDB_R7_REGNUM): Likewise.
(S390_TDB_R8_REGNUM): Likewise.
(S390_TDB_R9_REGNUM): Likewise.
(S390_TDB_R10_REGNUM): Likewise.
(S390_TDB_R11_REGNUM): Likewise.
(S390_TDB_R12_REGNUM): Likewise.
(S390_TDB_R13_REGNUM): Likewise.
(S390_TDB_R14_REGNUM): Likewise.
(S390_TDB_R15_REGNUM): Likewise.
(S390_NUM_REGS): Increase.
(S390_IS_TDBREGSET_REGNUM): New macro.
(s390_regmap_tdb): Declare.
(s390_sizeof_tdbregset): Define.
(tdesc_s390_te_linux64): Declare.
(tdesc_s390x_te_linux64): Likewise.
* s390-tdep.c: Add includes for "auxv.h", <elf.h>,
"features/s390-te-linux64.c", and "features/s390x-te-linux64.c".
(s390_regmap_tdb): New regmap.
(s390_supply_tdb_regset): New function.
(s390_tdb_regset): New regset.
(s390_linux64v2_regset_sections): Add TDB regset to list.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Recognize TDB core note section.
(s390_core_read_description): If HWCAP indicates TE support,
select tdesc_s390_te_linux64 or tdesc_s390_s390x_te_linux64.
(s390_gdbarch_init): Handle TDB regset.
(_initialize_s390_tdep): Initialize new tdescs.
* s390-nat.c (HWCAP_S390_HIGH_GPRS): Remove define.
(have_regset_tdb): New variable.
(s390_native_supply): Support register invalidation.
(fetch_regset): Invalidate registers if ptrace yields ENODATA.
(check_regset): Treat ENODATA as "regset exists".
(s390_linux_fetch_inferior_registers): Add TDB.
(s390_read_description): Check for TDB existence and select
appropriate tdesc.
* gdbserver/Makefile.in (clean): Add removal of new makefile
targets.
(s390-te-linux64.c): New makefile target.
(s390x-te-linux64.c): Likewise.
* gdbserver/configure.srv (srv_regobj): Append new objects
s390-te-linux64.o and s390x-te-linux64.o.
(srv_xmlfiles): Append new files s390-te-linux64.xml,
s390x-te-linux64.xml, and s390-tdb.xml.
* gdbserver/linux-s390-low.c (init_registers_s390_te_linux64): New
declaration.
(tdesc_s390_te_linux64): Likewise.
(init_registers_s390x_te_linux64): Likewise.
(tdesc_s390x_te_linux64): Likewise.
(s390_check_regset): Treat ENODATA as "regset exists".
(s390_arch_setup): Add TDB regset support.
(initialize_low_arch): Initialize registers for new tdescs.
gdb/doc/ChangeLog:
2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.texinfo (Decimal Floating Point format): Mention S/390.
(Standard Target Features): Add new node to menu.
(S/390 and System z Features): New node.
gdb/testsuite/ChangeLog:
2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.arch/s390-tdbregs.c: New file.
* gdb.arch/s390-tdbregs.exp: New file.
2013-09-13 14:17:31 +00:00
Ulrich Weigand
2ccd146855
2013-09-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
...
* s390-tdep.h (S390_IS_GREGSET_REGNUM): New macro.
(S390_IS_FPREGSET_REGNUM): New macro.
* s390-tdep.c (s390_dwarf_regmap): Make const.
(regnum_is_gpr_full): New function for replacing repeated code.
(s390_pseudo_register_name): Use it.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_unwind_pseudo_register): Likewise.
(s390_regmap_gregset): New format for regmap.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_supply_regset): Adjust to new regmap format.
(s390_collect_regset): Likewise.
* s390-nat.c (s390_native_supply): Adjust to new regmap format.
(s390_native_collect): Likewise.
(supply_gregset): Likewise.
(fill_gregset): Likewise.
(supply_fpregset): Likewise.
(fill_fpregset): Likewise.
(fetch_regset): Likewise.
(store_regset): Likewise.
(s390_linux_fetch_inferior_registers): Likewise.
(s390_linux_fetch_inferior_registers): Likewise.
2013-09-13 14:11:15 +00:00
Sanimir Agovic
b3d3b4bda1
doc,mi: example refers to -list-features instead of -list-target-features
...
Corrected mi documentation about -list-target-features, example now uses the
correct mi command.
2013-09-13 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.texinfo (GDB/MI Miscellaneous Commands): Use
-list-target-features in the example.
2013-09-13 08:04:02 +00:00
Alan Modra
89e204c4bc
daily update
2013-09-13 00:00:04 +00:00
Stan Shebs
b866c52d3b
* README: New file.
2013-09-12 22:51:16 +00:00
Doug Evans
dc59cba6fc
* gdb.python/py-events.py (new_objfile_handler): Remove accidentally
...
added code to print event.inferior.
2013-09-12 22:39:26 +00:00
Chao-ying Fu
6f72df7710
2013-09-12 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
...
* gas/mips/bltzal.s: New file.
* gas/mips/bltzal.l: New file.
* gas/mips/mips.exp: Run the bltzal test.
2013-09-12 21:45:04 +00:00
Chao-ying Fu
173d34478a
2013-09-12 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
...
* config/tc-mips.c (match_insn): Set error when $31 is used for
bltzal* and bgezal*.
2013-09-12 21:41:09 +00:00
DJ Delorie
46dd523316
merge from gcc
2013-09-12 16:08:09 +00:00
Nick Clifton
bf5117e32d
* dwarf.c (dwarf_vmatoa): Rename to dwarf_vmatoa_1 and add a
...
precision parameter.
(dwarf_vmatoa): New wrapper for dwarf_vmatoa_1.
(print_dwarf_vma): Use dwarf_vmatoa_1.
(SAFE_BYTE_GET): Add check that VAL is big enough to contain
AMOUNT bytes.
(process_debug_info): Use an unsigned int for the offset size.
(process_debug_pubnames): Likewise.
(display_debug_aranges): Likewise.
(struct Frame_Chunk): Use dwarf_vma type for pc_begin and pc_range
fields.
(frame_display_row): Use print_dwarf_vma to display dwarf_vma
values.
(display_debug_frames): Likewise.
* binutils-all/x86-64/compressed-1a.d: Update expected output to
allow for 64-bit addresses.
* ld-elf/eh1.d: Update expected output to allow for
64-bit addresses.
* ld-elf/eh2.d: Likewise.
* ld-elf/eh3.d: Likewise.
* ld-elf/eh4.d: Likewise.
* ld-elf/eh5.d: Likewise.
* ld-elf/eh6.d: Likewise.
* ld-mips-elf/eh-frame1-n64.d: Likewise.
* ld-mips-elf/eh-frame2-n64.d: Likewise.
* ld-mips-elf/eh-frame3.d: Likewise.
* gas/cfi/cfi-alpha-1.d: Update expected output to allow for
64-bit addresses.
* gas/cfi/cfi-alpha-3.d: Likewise.
* gas/cfi/cfi-arm-1.d: Likewise.
* gas/cfi/cfi-common-1.d: Likewise.
* gas/cfi/cfi-common-2.d: Likewise.
* gas/cfi/cfi-common-3.d: Likewise.
* gas/cfi/cfi-common-4.d: Likewise.
* gas/cfi/cfi-common-5.d: Likewise.
* gas/cfi/cfi-common-6.d: Likewise.
* gas/cfi/cfi-common-7.d: Likewise.
* gas/cfi/cfi-hppa-1.d: Likewise.
* gas/cfi/cfi-i386-2.d: Likewise.
* gas/cfi/cfi-i386.d: Likewise.
* gas/cfi/cfi-m68k.d: Likewise.
* gas/cfi/cfi-mips-1.d: Likewise.
* gas/cfi/cfi-ppc-1.d: Likewise.
* gas/cfi/cfi-s390-1.d: Likewise.
* gas/cfi/cfi-s390x-1.d: Likewise.
* gas/cfi/cfi-sh-1.d: Likewise.
* gas/cfi/cfi-sparc-1.d: Likewise.
* gas/cfi/cfi-sparc64-1.d: Likewise.
* gas/cfi/cfi-x86_64.d: Likewise.
2013-09-12 09:14:47 +00:00
Andrew Pinski
1aa4cd774c
2013-09-12 Andrew Pinski <apinski@cavium.com>
...
* aarch64-linux-nat.c (aarch64_linux_set_debug_regs): Zero out regs.
2013-09-12 07:14:37 +00:00
Alan Modra
c9ee61e2dd
daily update
2013-09-12 00:00:04 +00:00
Jan Kratochvil
edf9f00c51
minidebuginfo: Fix stripping/debuginfo
...
gdb/doc/
2013-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (MiniDebugInfo): Prepare file debug and use it to create
mini_debuginfo. Strip binary before adding mini_debuginfo to it.
gdb/testsuite/
2013-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/gnu-debugdata.exp (objcopy 1): Move it lower and use only
debug part of the binary.
2013-09-11 08:31:44 +00:00
Jan Kratochvil
1d236d2308
minidebuginfo: ppc64 sync testcase->doc
...
gdb/doc/
2013-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Sync documentation with gdb.base/gnu-debugdata.exp.
* gdb.texinfo (MiniDebugInfo): Add comment and "D" in the example.
2013-09-11 08:29:46 +00:00
Jan Kratochvil
5423b017be
minidebuginfo: Obvious changes
...
gdb/doc/
2013-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (MiniDebugInfo): Fix two trailing dots.
gdb/testsuite/
2013-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/gnu-debugdata.exp (strip): Add -R .comment.
(addlink): Add comment.
2013-09-11 08:28:04 +00:00
Alan Modra
f9a1695ef6
daily update
2013-09-11 00:00:04 +00:00
DJ Delorie
53f94b92ee
merge from gcc
2013-09-10 19:01:22 +00:00
Nick Clifton
846a11e420
* dwarf.c (display_debug_frames): Check for DW64_CIE_ID when
...
parsing 64-bit frames.
2013-09-10 16:19:08 +00:00
DJ Delorie
eabdca0f8d
merge from gcc
2013-09-10 16:05:02 +00:00
Ulrich Weigand
d91fab15e7
2013-09-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
...
* config/s390/s390.mh (NATDEPFILES): Add linux-waitpid.o.
2013-09-10 15:05:23 +00:00
Sanimir Agovic
9295cf6f8e
test: adjust 'cd' regexpr to match an optional canonically pathname
...
New regexpr now correctly deals with trailing canonical pathname.
Before only the following output was matched:
(gdb) cd
Working directory /users/foo
In addition it now matches an optional trailing canonical pathname:
(gdb) cd
Working directory /users/foo
(canonically /nfs/users/foo).
Triggered by `realpath .` != `pwd`
2013-09-10 Sanimir Agovic <sanimir.agovic@intel.com>
testsuite/
* gdb.base/default.exp: Adjust regexpr for 'cd' to match optional
canonical pathname.
2013-09-10 07:32:25 +00:00
Alan Modra
cca931b4c8
daily update
2013-09-10 00:00:04 +00:00
Andrew Burgess
5a5d8ead94
Remove use of deprecated_init_ui_hook from quit_confirm.
...
https://sourceware.org/ml/gdb-patches/2013-09/msg00224.html
gdb/ChangeLog
* top.c (quit_confirm): Remove use of deprecated_init_ui_hook.
2013-09-09 12:13:58 +00:00
Alan Modra
3ce8d851a6
daily update
2013-09-09 00:00:04 +00:00
Alan Modra
92796d6430
daily update
2013-09-08 00:00:04 +00:00
Alan Modra
3d05c071aa
daily update
2013-09-07 00:00:04 +00:00
Pedro Alves
1385f66cf4
remote-sim.c: Send debug output to gdb_stdlog.
...
Tested by building for --target=arm-eabi, and playing with the debug
output a bit.
gdb/
2013-09-06 Pedro Alves <palves@redhat.com>
* remote-sim.c (dump_mem, gdbsim_fetch_register)
(gdbsim_store_register, gdbsim_kill, gdbsim_load)
(gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume_inferior, gdbsim_wait)
(gdbsim_files_info, gdbsim_mourn_inferior): Send debug output to
gdb_stdlog.
2013-09-06 18:29:42 +00:00
Pedro Alves
146ec4dbcf
remote-sim.c: Don't install a deprecated_xfer_memory method.
...
Manually tested with a --target=arm-eabi build, and doing things like:
$ arm-eabi-gcc ~/gdb/tests/main.c -o a.out -c -g
$ ./gdb a.out
...
(gdb) tar sim
(gdb) load
(gdb) disassemble 0
Dump of assembler code for function main:
0x00000000 <+0>: mov r12, sp
0x00000004 <+4>: push {r11, r12, lr, pc}
0x00000008 <+8>: sub r11, r12, #4
0x0000000c <+12>: sub sp, sp, #8
0x00000010 <+16>: str r0, [r11, #-16]
0x00000014 <+20>: str r1, [r11, #-20]
0x00000018 <+24>: mov r3, #0
0x0000001c <+28>: mov r0, r3
0x00000020 <+32>: sub sp, r11, #12
0x00000024 <+36>: ldm sp, {r11, sp, pc}
End of assembler dump.
(gdb) p *0 = 1
0x00000001
gdb/
2013-09-06 Pedro Alves <palves@redhat.com>
* remote-sim.c (dump_mem): Constify buf parameter.
gdbsim_xfer_inferior_memory): Rename to ...
(gdbsim_xfer_memory): ... this. Adjust interface as
target_xfer_partial helper.
(gdbsim_xfer_partial): New function.
(init_gdbsim_ops): Don't install a deprecated_xfer_memory hook.
Install a to_xfer_partial hook. Send output to gdb_stdlog.
2013-09-06 18:10:39 +00:00
Pedro Alves
fcde0081d9
remote-sim.c: cleanup debug output code.
...
Manually tested with a --target=arm-eabi build, and doing
$ arm-eabi-gcc ~/gdb/tests/main.c -o a.out -c -g
$ ./gdb a.out
...
(gdb) tar sim
(gdb) load
(gdb) set debug remote 1
(gdb) disassemble 0
Dump of assembler code for function main:
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x0, len 4, write 0
0x00000000 <+0>: 0xe1a0c00d
mov r12, sp
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x4, len 4, write 0
0x00000004 <+4>: 0xe92dd800
push {r11, r12, lr, pc}
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x8, len 4, write 0
0x00000008 <+8>: 0xe24cb004
sub r11, r12, #4
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0xc, len 4, write 0
0x0000000c <+12>: 0xe24dd008
sub sp, sp, #8
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x10, len 4, write 0
0x00000010 <+16>: 0xe50b0010
str r0, [r11, #-16]
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x14, len 4, write 0
0x00000014 <+20>: 0xe50b1014
str r1, [r11, #-20]
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x18, len 4, write 0
0x00000018 <+24>: 0xe3a03000
mov r3, #0
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x1c, len 4, write 0
0x0000001c <+28>: 0xe1a00003
mov r0, r3
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x20, len 4, write 0
0x00000020 <+32>: 0xe24bd00c
sub sp, r11, #12
gdbsim_xfer_inferior_memory: myaddr 0x7fffffffd400, memaddr 0x24, len 4, write 0
0x00000024 <+36>: 0xe89da800
ldm sp, {r11, sp, pc}
End of assembler dump.
(gdb) p *0 = 1
gdbsim_xfer_inferior_memory: myaddr 0xc69bc0, memaddr 0x0, len 4, write 1
0x00000001
$1 = 1
Which happens to differ from before, I think due to stdout line buffering:
(gdb) disassemble 0
Dump of assembler code for function main:
0x00000000 <+0>: gdbsim_xfer_inferior_memory: myaddr 0x0x7fffffffd400, memaddr 0x0, len 4, write 0
0xe1a0c00d
But the new output looks reasonable to me, better even.
gdb/
2013-09-06 Pedro Alves <palves@redhat.com>
* remote-sim.c (gdbsim_xfer_inferior_memory): Use
host_address_to_string, and send debug output to gdb_stdlog.
2013-09-06 17:41:50 +00:00
Pedro Alves
fb71d39e8c
[gdbserver] Garbage collect unused dependency-tracking Makefile variables.
...
These used to be necessary for manual rule dependency tracking.
Nothing uses them anymore. (regdat_sh is still needed.)
gdb/gdbserver/
2013-09-06 Pedro Alves <palves@redhat.com>
* Makefile.in (gdb_proc_service_h, regdef_h, regcache_h)
(signals_def, signals_h, ptid_h, ax_h, agent_h, linux_btrace_h)
(linux_osdata_h, vec_h, gdb_vecs_h, host_defs_h, libiberty_h)
(server_h, gdbthread_h, linux_low_h, linux_ptrace_h)
(gdb_thread_db_h, linux_procfs_h, lynx_low_h, nto_low_h)
(mips_linux_watch_h, i386_low_h, win32_low_h): Delete.
2013-09-06 12:04:56 +00:00
Pedro Alves
8e7e991006
[gdbserver] Update a couple Makefile rules.
...
These two are still written in the pre-auto-dependency-tracking style.
They probably were written before that, and committed afterwards
without adjustment. An easy oversight to make.
gdb/gdbserver/
2013-09-06 Pedro Alves <palves@redhat.com>
* Makefile.in (linux-btrace.o, mips-linux-watch.o): Remove
explicit header dependencies and use $COMPILE/$POSTCOMPILE.
2013-09-06 11:54:07 +00:00
Pedro Alves
7c3a12caf5
[gdbserver] Fix IPA build.
...
Somehow, my builds yesterdays didn't trip on this...
../src/gdb/gdbserver/linux-amd64-ipa.c: In function ‘initialize_low_tracepoint’:
../src/gdb/gdbserver/linux-amd64-ipa.c:172:3: error: ‘ipa_tdesc’ undeclared (first use in this function)
../src/gdb/gdbserver/linux-amd64-ipa.c:172:3: note: each undeclared identifier is reported only once for each function it appears in
gdb/gdbserver/
2013-09-06 Pedro Alves <palves@redhat.com>
* linux-amd64-ipa.c: Include tracepoint.h.
* linux-i386-ipa.c: Include tracepoint.h.
2013-09-06 10:58:11 +00:00
Ricard Wanderlof
749c8b38fa
Extract Linux-specific portitions of cris-tdep.c to a new file.
...
This brings in some standard functionality hitherdo missing from
the CRIS/CRISv32 port thanks to the new call to gdbarch_init_osabi,
as well as clearly showing that there is Linux support for this
platform by virtue of the existence of a cris-linux-tdep.c file.
2013-09-06 Ricard Wanderlof <ricardw@axis.com>
* Makefile.in (ALL_TARGET_OBS): Add cris-linux-tdep.o.
* configure.tgt: Add cris-linux-tdep.o and linux-tdep.o to
gdb_target_obs for cris target.
* cris-tdep.c (struct gdbarch_tdep): Move to cris-tdep.h.
(cris_gdbarch_init): Move calls to
set_gdbarch_fetch_tls_load_module_address and
set_solib_svr4_fetch_link_map_offsets to cris-linux-tdep.c.
Add call to gdbarch_init_osabi.
* cris-linux-tdep.c: New file.
* cris-tdep.h: New file.
2013-09-06 10:50:10 +00:00
Andrew Burgess
43df09d937
OBVIOUS: Remove legacy comment referring to deprecated_init_ui_hook.
...
gdb/ChangeLog
* tui/tui-io.c (tui_initialize_io): Remove legacy comment referring
to deprecated_init_ui_hook.
2013-09-06 10:12:20 +00:00
Andrew Burgess
4d09c5b423
Give every interpreter a command_loop_proc.
...
https://sourceware.org/ml/gdb-patches/2013-09/msg00179.html
gdb/ChangeLog
* cli/cli-interp.c (_initialize_cli_interp): Add a
command_loop_proc to interp_procs.
* event-top.c (cli_command_loop): Change signature to match
interp_command_loop_ftype.
* event-top.h (cli_command_loop): Same.
* interps.c (interp_new): Require every interpreter to have a
command_loop_proc.
(current_interp_command_loop): Just call the command_loop_proc on
the current interpreter.
* tui/tui-interp.c (_initialize_tui_interp): Add a
command_loop_proc to interp_procs.
2013-09-06 08:53:09 +00:00
Ricard Wanderlof
8eb3d7b6ca
Add support for threaded debugging for CRISv32.
...
2013-09-06 Ricard Wanderlof <ricardw@axis.com>
* cris-tdep.c (cris_gdbarch_init): Add call to
get_gdbarch_fetch_tls_load_module_address.
gdbserver
* linux-crisv32-low.c (PTRACE_GET_THREAD_AREA): New macro.
(ps_get_thread_area): New function.
2013-09-06 08:37:17 +00:00
Andrew Burgess
1581d8a7b4
Fix filename format in previous ChangeLog entry.
...
I used the wrong format for the filenames in a previous changelog entry, I
incorrectly included the "gdb/" prefix.
2013-09-06 08:25:25 +00:00
Ricard Wanderlof
18b3c2f515
Cosmetic clean up of names of *elf_greg_t types for CRIS/CRISv32.
...
2013-09-06 Ricard Wanderlof <ricardw@axis.com>
* cris-tdep.c (cris_elf_greg_t): Rename from elf_greg_t.
(cris_elf_gregset_t): Rename from elf_gregset_t.
(crisv32_elf_gregset_t): Adjust.
(cris_supply_gregset, fetch_core_registers): Adjust.
2013-09-06 08:23:46 +00:00
Ricard Wanderlof
dc8636efde
Trivial patch to remove dependency on host unsigned long type
...
from cris-tdep.c.
2013-09-06 Ricard Wanderlof <ricardw@axis.com>
* cris-tdep.c (elf_greg_t): Change typedef to unsigned char[4]
2013-09-06 08:14:33 +00:00
Ricard Wanderlof
eddddb9d52
Fix compilation for target gdbserver on CRISv32 platform.
...
One misspelled function call, and one superfluous typedef. The latter
causes an error of the following type when building:
linux-crisv32-low.c:372: error: conflicting types for 'elf_gregset_t'
/.../target/include/asm/elf.h:36:
error: previous declaration of 'elf_gregset_t' was here
2013-09-06 Ricard Wanderlof <ricardw@axis.com>
* linux-crisv32-low.c (elf_gregset_t): Delete typedef.
(initialize_low_arch): Call init_registers_crisv32 rather than
init_register_crisv32.
2013-09-06 08:04:19 +00:00
Alan Modra
253a4c9811
daily update
2013-09-06 00:00:04 +00:00
Pedro Alves
270c6aeaf2
Add missing new files from these previous commits:
...
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (handle_vFile, hostio_last_error_from_errno): Move
to ...
* hostio.h: ... this new file.
* hostio.c, server.c, linux-low.c, nto-low.c, spu-low,
win32-low.c: Include hostio.h.
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (gdb_client_data, handler_func, callback_handler_func)
(delete_file_handler, add_file_handler, append_callback_event)
(delete_callback_event, start_event_loop, initialize_event_loop):
Move to event-loop.h and include it.
* event-loop.h: New file.
2013-09-05 Pedro Alves <palves@redhat.com>
* dll.c, inferiors.c, remote-utils.c, server.c: Include "dll.h".
* server.h (struct dll_info, all_dlls, dlls_changed, clear_dlls)
(loaded_dll, unloaded_dll): Move to ...
* dll.h: ... this new file.
* inferiors.c, remote-utils.c, win32-low.c: Include "dll.h".
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (current_process, get_thread_process, all_processes)
(add_inferior_to_list, for_each_inferior, current_inferior)
(remove_inferior, add_process, remove_process, find_process_pid)
(have_started_inferiors_p, have_attached_inferiors_p)
(thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id)
(clear_inferiors, find_inferior, find_inferior_id)
(inferior_target_data, set_inferior_target_data)
(inferior_regcache_data, set_inferior_regcache_data): Move to
inferiors.h, and include it.
* inferiors.h: New file.
2013-09-05 Pedro Alves <palves@redhat.com>
* ax.c, linux-low.c, linux-x86-low.c, server.c: Include
tracepoint.h.
* server.h (IPA_BUFSIZ, initialize_tracepoint, tracing)
(disconnected_tracing, tracepoint_look_up_symbols, stop_tracing
(handle_tracepoint_general_set, handle_tracepoint_query)
(tracepoint_finished_step, tracepoint_was_hit)
(release_while_stepping_state_list, current_traceframe)
(in_readonly_region, traceframe_read_mem)
(fetch_traceframe_registers, traceframe_read_sdata)
(traceframe_read_info, struct fast_tpoint_collect_status)
(fast_tracepoint_collecting, force_unlock_trace_buffer)
(handle_tracepoit_bkpts, initialize_low_tracepoint)
(supply_fast_tracepoint_registers)
(supply_static_tracepoint_registers, set_trampoline_buffer_space)
(ipa_tdesc, claim_trampoline_space)
(have_fast_tracepoint_trampoline_buffer, gdb_agent_about_to_close)
(agent_mem_read, agent_get_trace_state_variable_value)
(agent_set_trace_state_variable_value, agent_tsv_read)
(agent_mem_read_string, get_raw_reg_func_addr)
(get_get_tsv_func_addr, get_set_tsv_func_addr): Move to ...
* tracepoint.h: ... this new file.
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (perror_with_name, error, fatal, warning, paddress)
(pulongest, plongest, phex_nz, pfildes): Move to utils.h, and
include it.
* utils.h: New file.
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (remote_debug, noack_mode, transport_is_reliable)
(gdb_connected, STDIO_CONNECTION_NAME, remote_connection_is_stdio)
(read_ptid, write_ptid, putpkt, putpkt_binary, putpkt_notif)
(getpkt, remote_prepare, remote_open, remote_close, write_ok)
(write_enn, initialize_async_io, enable_async_io)
(disable_async_io, check_remote_input_interrupt_request)
(convert_ascii_to_int, convert_int_to_ascii, new_thread_notify)
(dead_thread_notify, prepare_resume_reply)
(decode_address_to_semicolon, decode_address, decode_m_packet)
(decode_M_packet, decode_X_packet, decode_xfer_write)
(decode_search_memory_packet, unhexify, hexify)
(remote_escape_output, unpack_varlen_hex, clear_symbol_cache)
(look_up_one_symbol, relocate_instruction)
(monitor_output): Move to remote-utils.h, and include it.
* remote-utils.h: New file.
2013-09-05 22:18:48 +00:00