* c-exp.y (exp): Add new productions for destructors after '.' and
'->'.
(write_destructor_name): New function.
gdb/testsuite
* gdb.cp/m-static.exp: Add destructor-printing tests.
* exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
* remote.c (trace_error): Remove the special handling of '2'.
(readchar) <SERIAL_EOF>
(readchar) <SERIAL_ERROR>
(getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
(remote_get_trace_status): Call throw_exception if EX is
TARGET_CLOSE_ERROR.
* utils.c (perror_with_name): Rename to ...
(throw_perror_with_name): ... here. New parameter errcode, describe it
in the function comment.
(perror_with_name): New function wrapper.
* utils.h (enum errors): New stub declaration.
(throw_perror_with_name): New declaration.
gdb/testsuite/
* gdb.server/server-kill.c: New file.
* gdb.server/server-kill.exp: New file.
Just the usual missing $gdb_prompt match:
(gdb) tstatus
No trace has been run on the target.
Collected 0 trace frames.
Trace buffer has 5242880 bytes of 5242880 bytes free (0% full).
Trace will stop if GDB disconnects.
Not looking at any trace frame.
PASS: gdb.trace/trace-buffer-size.exp: get default buffer size
(gdb) set trace-buffer-size 4
(gdb) FAIL: gdb.trace/trace-buffer-size.exp: set trace buffer size 1
This fixes it.
gdb/testsuite/
2013-03-21 Pedro Alves <palves@redhat.com>
* gdb.trace/trace-buffer-size.exp (get default buffer size):
Expect $gdb_prompt in gdb_test_multiple.
* NEWS: Add entry.
* event-top.c: #include "maint.h".
* main.c: #include "maint.h".
* maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
timeval-utils.h, maint.h, cli/cli-setshow.h.
(per_command_time, per_command_space): New static globals.
(per_command_symtab): New static global.
(per_command_setlist, per_command_showlist): New static globals.
(struct cmd_stats): Move here from utils.c.
(set_per_command_time): Renamed from set_display_time in utils.c
and moved here. All callers updated.
(set_per_command_space): Renamed from set_display_space in utils.c
and moved here. All callers updated.
(count_symtabs_and_blocks): New function.
(report_command_stats): Moved here from utils.c. Add support for
printing symtab stats. Only print data if enabled before command
executed.
(make_command_stats_cleanup): Ditto.
(sert_per_command_cmd, show_per_command_cmd): New functions.
(_initialize_maint_cmds): Add new commands
mt set per-command {space,time,symtab} {on,off}.
* maint.h: New file.
* top.c: #include "maint.h".
* utils.c (reset_prompt_for_continue_wait_time): New function.
(get_prompt_for_continue_wait_time): New function.
* utils.h (reset_prompt_for_continue_wait_time): Declare
(get_prompt_for_continue_wait_time): Declare.
(make_command_stats_cleanup): Moved to maint.h.
(set_display_time, set_display_space): Moved to maint.h and renamed
to set_per_command_time, set_per_command_space.
* cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
parse_binary_operation and made non-static. Don't call error,
just return an error marker. All callers updated.
* cli/cli-setshow.h (parse_cli_boolean_value): Declare.
doc/
* gdb.texinfo (Maintenance Commands): Add docs for
"mt set per-command {space,time,symtab} {on,off}".
testsuite/
* gdb.base/maint.exp: Update tests for per-command stats.
* c-exp.y (yylex): Rewrite to push all tokens onto the FIFO.
Handle FILENAME token.
gdb/testsuite
* gdb.cp/cpexprs.exp: Add test for FILENAME:: case.
* gdb.cp/misc.exp: Add test for FILENAME:: case.
This is a regression from 7.5, introduced/exposed by:
http://sourceware.org/ml/gdb-patches/2012-07/msg00259.html
There are a series of issues with this code.
It does:
unsigned int val = parse_and_eval_long (arg);
^^^^^^^^^^^^
(unsigned, usually 32-bit) while parse_and_eval_long returns a LONGEST
(usually 64-bit), so we lose precision without noticing:
(gdb) set remote hardware-watchpoint-limit 0x100000000
(gdb) show remote hardware-watchpoint-limit 0x100000000
The maximum number of target hardware watchpoints is 0.
While at it, print the invalid number with plongest, so the user sees
what GDB thought the number was:
(gdb) set remote hardware-watchpoint-limit 0x100000000
integer 4294967296 out of range
So with "set remote hardware-watchpoint-limit -1", val ends converted
to 0xffffffff, which then fails the
else if (val >= INT_MAX)
error (_("integer %u out of range"), val);
test.
Looking at that INT_MAX check, we forbid INT_MAX itself, but we
shouldn't, as that does fit in 'int' -- we want to forbid values
_greater_ than INT_MAX (and less than INT_MIN, while at it):
(gdb) set remote hardware-watchpoint-limit 2147483647
integer 2147483647 out of range
The same problem is in the new var_zuinteger_unlimited code, which
also uses "int" for variable.
Also, when printing a 'signed int', we should use %d, not %u.
This adds a couple regression tests. Not completely thorough in checking
all kinds of invalid input; I'm saving more exaustive testing around
zXXinteger commands for something like new test-assisting commands
like "maint test cmd-zinteger -1", where testing would focus on the
command types, and thus be independent of particular user commands of
particular GDB features.
Tested on x86_64 Fedora 17.
gdb/
2013-03-20 Pedro Alves <palves@redhat.com>
PR gdb/15289
* cli/cli-setshow.c (do_set_command)
<var_uinteger, var_zuinteger>: Use LONGEST for variable holding
the result of parsing the command argument. Throw error if the
value is greater than UINT_MAX. Print the invalid value with
plongest.
<var_integer, var_zinteger>: Use LONGEST for variable holding the
result of parsing the command argument. Throw error if the value
is greater than INT_MAX, not greater or equal. Also throw error
if the value is less than INT_MIN. Print the invalid value with
plongest.
<var_zuinteger_unlimited>: Throw error if the value is greater
than INT_MAX, not greater or equal.
(do_show_command) <var_integer, var_zinteger,
var_zuinteger_unlimited>: Use %d for printing int, not %u.
gdb/testsuite/
2013-03-20 Pedro Alves <palves@redhat.com>
PR gdb/15289
* gdb.base/remote.exp: Test
"set remote hardware-watchpoint-limit -1",
"set remote hardware-breakpoint-limit -1",
"set remote hardware-watchpoint-limit 2147483647" and
"set remote hardware-breakpoint-limit 2147483647".
Make sure we don't fallback to printing the initial value of a
non-const variable in the executable.
Also make sure we can do 'disassemble', as another test that GDB is
able to read read-only parts from the executable (the existing test of
printing constglob also covers that case).
gdb/testsuite/
2013-03-20 Pedro Alves <palves@redhat.com>
Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.c: Add comments.
(nonconstglob): New global.
* gdb.trace/tfile.exp: Add comments. Test printing a non-const
global that is not covered by the trace frame. Test
disassembling.
Subject: [PATCH] Fix for PR c++/15203 and PR c++/15210
Date: Sat, 09 Mar 2013 02:50:49 -0300 (5 days, 4 hours, 57 minutes ago)
Message-ID: <m3a9qdnmti.fsf@redhat.com>
Hi,
This bug was reported internally at our Bugzilla, along with a proposed
fix. After talking to Keith about it, he investigated and came up with
another patch needed to really fix the issue on CVS HEAD.
The first part of the fix is the patch to cp-namespace.c. It handles
the case when we are accessing a static variable inside a function
(inside a class) by the full linespec (is it right, Keith?). E.g.:
class foo
{
public:
int bar()
{
static int var = 0;
}
};
And then, printing the value of `var':
(gdb) print 'foo::bar()::var'
GDB would fall in an internal_error:
gdb/cp-namespace.c:816: internal-error: cp_lookup_nested_symbol called on a non-aggregate type.
This is because `cp_lookup_nested_symbol' is not handling the case when
TYPE_CODE is either _FUNC or _METHOD. This patch fixes it by returning
NULL in this case.
The second part of the fix is the patch to elfread.c. It is needed
because the BSF_GNU_UNIQUE flag was added to some symbols in
<http://sourceware.org/ml/binutils/2009-06/msg00016.html>. Because of
that, (still) the command:
(gdb) print 'foo::bar()::var'
where `var' is a static variable returns:
"No symbol "foo::bar()::var" in current context."
So with the second patch applied the command finally DTRT:
(gdb) print 'foo::bar()::var'
$1 = 0
This may not be the ideal solution, according to Keith it would be good
to implement productions on c-exp.y in order to recognize
CLASS::FUNCTION::VARIABLE, but it is a solution which works with what we
have today.
I regtested it in Fedora 17 x86_64 with -m64 and -m32, including
gdbserver, without regressions.
gdb/:
2013-03-14 Keith Seitz <keiths@redhat.com>
Alan Matsuoka <alanm@redhat.com>
PR c++/15203
PR c++/15210
* cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
TYPE_CODE_METHOD.
* elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
symbols.
gdb/testsuite/:
2013-03-14 Sergio Durigan Junior <sergiodj@redhat.com>
PR c++/15203
PR c++/15210
* gdb.cp/m-static.cc (keepalive_int): New function.
(gnu_obj_1::method): New variable `sintvar', call `keepalive_int'.
* gdb.cp/m-static.exp: New test for `sintvar'.
* gdb.trace/tstatus.exp (run_trace_experiment): Save the output
of 'tstatus' into tstatus_output.
(top level): Save the trace data to tfile. Read trace file in
tfile target. Check the trace status.
the last matched 'V' blcok in trace frame.
gdb/gdbserver:
* tracepoint.c (traceframe_read_tsv): Look for the last matched
'V' block in trace frame.
gdb/testsuite:
* gdb.trace/tsv.exp (check_tsv): New.
(top level): Save a tfile on current trace session. Call
check_tsv on live target. Load the tfile with target tfile
and call check_tsv again.
GDB treats the identifiers 'if', 'thread', and 'task' unconditionally
as expression delimiters in Ada mode, which is correct for 'if' and 'task',
but wrong for 'thread' in cases such as
print thread
Borrowing from c-exp.y, we observe that 'thread' must be followed by
numerals, whereas identifiers never are and treat them as delimiters
only in that case.
In the process, the current also refactors and incidentally fixes the
code for rewinding the input to before the delimiting tokens. For
example, the code
watch expr if i > 2
fails because the input is only rewound to just before the 'i',
leaving the 'if' as part of the expression (and thus making the
rest look like trailing junk rather than a conditional clause).
gdb/ChangeLog:
* ada-lex.l (rules): Only recognize 'thread' as a
delimiter when followed by numerals, as for c-exp.y.
Use new rewind_to_char function to rewind the input for
expression-delimiting tokens.
(rewind_to_char): New function.
gdb/testsuite/ChangeLog:
* gdb.ada/expr_delims.exp: New file.
* gdb.ada/expr_delims/foo.adb: New file.
* gdb.ada/expr_delims/pck.ads: New file.
* gdb.ada/expr_delims/pck.adb: New file.
Fix entry-values if the callee called a noreturn function.
* dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
get_frame_address_in_block. Add new comment.
gdb/testsuite/
Fix entry-values if the callee called a noreturn function.
* gdb.arch/amd64-tailcall-noret.S: New file.
* gdb.arch/amd64-tailcall-noret.c: New file.
* gdb.arch/amd64-tailcall-noret.exp: New file.
Fix entry-values in C++ across CUs.
* dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
lookup_minimal_symbol. Add a comment.
* dwarf2read.c
(read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
DW_AT_linkage_name.
gdb/testsuite/
Fix entry-values in C++ across CUs.
* gdb.arch/amd64-tailcall-cxx.exp: New file.
* gdb.arch/amd64-tailcall-cxx1.S: New file.
* gdb.arch/amd64-tailcall-cxx1.cc: New file.
* gdb.arch/amd64-tailcall-cxx2.S: New file.
* gdb.arch/amd64-tailcall-cxx2.cc: New file.
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention set and show trace-buffer-size commands.
Mention new packet.
* target.h (struct target_ops): New method
to_set_trace_buffer_size.
(target_set_trace_buffer_size): New macro.
* target.c (update_current_target): Set up new method.
* tracepoint.c (trace_buffer_size): New global.
(start_tracing): Send it to the target.
(set_trace_buffer_size): New function.
(_initialize_tracepoint): Add new setshow for trace-buffer-size.
* remote.c (remote_set_trace_buffer_size): New function.
(_initialize_remote): Use it.
(QTBuffer:size) New remote command.
(PACKET_QTBuffer_size): New enum.
(remote_protocol_features): Add an entry for
PACKET_QTBuffer_size.
gdb/gdbserver/
* tracepoint.c (trace_buffer_size): New global.
(DEFAULT_TRACE_BUFFER_SIZE): New define.
(init_trace_buffer): Change to one-argument function. Allocate
trace buffer memory.
(handle_tracepoint_general_set): Call cmd_bigqtbuffer_size to
handle QTBuffer:size packet.
(cmd_bigqtbuffer_size): New function.
(initialize_tracepoint): Call init_trace_buffer with
DEFAULT_TRACE_BUFFER_SIZE.
* server.c (handle_query): Add QTBuffer:size in the
supported packets.
gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
trace-buffer-size set and show commands.
(Tracepoint Packets): Document QTBuffer:size.
(General Query Packets): Document QTBuffer:size.
gdb/testsuite/
* gdb.trace/trace-buffer-size.exp: New file.
* gdb.trace/trace-buffer-size.c: New file.
The current tstatus.exp tests shows PASSes if either the target
support or not the optional tstatus bits:
PASS: gdb.trace/tstatus.exp: tstatus does not report trace stop reason
PASS: gdb.trace/tstatus.exp: tstatus reports trace stop reason
The former (and any other similar case) should be UNSUPPORTED rather
than PASS. That'd make it much easier to spot actually problems with
the test (e.g., the one Yao's previous patch addressed), along with
regressions and progressions.
The "not supported" paths in tstatus.exp explicitly check for output
you'd get if the feature wasn't supported, so real unexpected failures
will still be caught as FAILs.
So now e.g., where we wanted to check if tstatus reports the trace
stop reason, and if the target does support it, we get
PASS: tstatus reports trace stop reason
if the target actually reports what we'd expect if the trace stop
reason isn't supported, we get:
UNSUPPORTED: tstatus reports trace stop reason
and if the target reports something else unexpected, we get:
FAIL: tstatus reports trace stop reason
That has the added bonus that the test string is always the same and
only the test results change (PASS/FAIL/UNSUPPORTED), which makes it
easier for testers see regressions, compared to the previous:
-PASS: gdb.trace/tstatus.exp: tstatus reports trace stop reason
+PASS: gdb.trace/tstatus.exp: tstatus does not report trace stop reason
which clearly easily goes by unnoticed, as evidenced by the existing
problem Yao's previous patch addressed.
Tested on x86_64 Fedora 17.
gdb/testsuite/
2013-03-06 Pedro Alves <palves@redhat.com>
* gdb.trace/tstatus.exp (run_trace_experiment): When the target
doesn't support the tested optional feature, call "unsupported"
with the same test message as the "pass" case, instead of calling
"pass" with a different message. Use the same text for the "fail"
cases too.
* gdb.trace/tstatus.exp: Remove the invocation of
gdb_load_shlibs, gdb_compile, clean_restart and runto_main.
(test_tracepoints): Don't set fast tracepoint.
(top level): Don't check agent library is loaded or not.
* linespec.c (struct linespec_canonical_name): New.
(struct linespec_state): Change canonical_names type to it.
(add_sal_to_sals): Change variable canonical_name to canonical. Change
xrealloc element size. Initialize the different CANONICAL fields.
(canonical_to_fullform): New.
(filter_results): Use it. Add variables canonical, fullform and
cleanup.
(struct decode_line_2_item, decode_line_2_compare_items): New.
(decode_line_2): Remove variables iter and item_names, add variables
items and items_count. Modify the code for these new variables.
gdb/testsuite/
* gdb.linespec/base/one/thefile.cc (twodup): New.
(m): Call it.
* gdb.linespec/base/two/thefile.cc (dupname): New.
(n): Call it.
* gdb.linespec/break-ask.exp: New file.
* gdb.linespec/lspec.cc (body_elsewhere): New comment marker.
* gdb.trace/report.exp: Move some code to ...
(use_collected_data): New.
(top level): Call use_collected_data once on the live target.
Save at file of the current trace session, load it with target
tfile, and call use_collected_data again.
* python/py-arch.c (archpy_disassmble): Implementation of the
new method gdb.Architecture.disassemble.
(arch_object_methods): Add entry for the new method.
* doc/gdb.texinfo (Architectures In Python): Add description
about the new method gdb.Architecture.disassemble.
* testsuite/gdb.python/py-arch.c: New test case
* testsuite/gdb.python/py-arch.exp: New tests to test
gdb.Architecture.disassemble
* testsuite/gdb.python/Makefile.in: Add py-arch to the list of
EXECUTABLES.
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention new field "trace-file".
* tracepoint.c (trace_status_mi): Output "trace-file" field.
(tfile_open): Record the trace file's filename in the trace
status.
(tfile_files_info): Mention the name of the trace file.
Check the "filename" field explicitely.
(trace_status_command): Explicitely check "filename" field.
(trace_find_command): Ditto.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
* tracepoint.h (struct trace_status) <from_file>: Rename it
to "filename" and make it hold the trace file's filename
instead of a boolean.
* remote.c (remote_get_trace_status): Initialize "filename"
field with NULL instead of 0.
gdb/doc/
* gdb.texinfo (GDB/MI Tracepoint Commands) <-trace-status>:
Document the "trace-file" field.
gdb/testsuite/
* gdb.trace/tfile.exp: Add test for -trace-status command.
I happened to notice a bug with ptype &Ref, and found out userdef.exp
actually exercises the bug. With:
class Container
{
public:
Member m;
Member& operator* ();
};
Member& Container::operator* ()
{
return this->m;
}
And 'c' is of type Container:
(gdb) p c
$1 = {m = {z = -9192}}
(gdb) p *c
$2 = (Member &) @0x7fffffffda20: {z = -9192}
(gdb) ptype *c
type = class Member {
public:
int z;
} &
(gdb) p &*c
$3 = (Member *) 0x7fffffffda20
(gdb) ptype &*c
type = class Member {
public:
int z;
} &*
(gdb)
Notice that last print (&*c) on says the type is a pointer - that's
how you get the address behind a reference. But notice the last ptype
instead says the type of the same expression is a pointer _reference_.
This looks like a bug to me.
This patch fixes it. The issue is that we're entering the VALUE_LVAL
(x) == lval_memory branch by mistake for references. The fix is just
to swap the tests so references are checked first, like value_addr
also handles references first.
Tested on x86_64 Fedora 17.
2013-02-14 Pedro Alves <palves@redhat.com>
* eval.c (evaluate_subexp_for_address) <default_case_after_eval,
EVAL_AVOID_SIDE_EFFECTS>: Swap and handle TYPE_CODE_REF before
lval_memory.
2013-02-14 Pedro Alves <palves@redhat.com>
* gdb.cp/userdef.exp (ptype &*c): Don't expect an &.
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* tracepoint.h (validate_trace_state_variable_name): Declare.
* tracepoint.c (validate_trace_state_variable_name): New.
(trace_variable_command): Parse the trace state variable's name
without using parse_expression. Do several validations.
* mi/mi-main.c (mi_cmd_trace_define_variable): Don't parse the
trace state variable's name with parse_expression. Validate it.
gdb/testsuite/
* gdb.trace/tsv.exp: Adjust tests, and add a few more.
* c-exp.y (lex_one_token): Initialize other fields of yylval on
NAME return.
(classify_inner_name): Remove 'first_name' argument, add
'context'. Remove unused variable.
(yylex): Explicitly maintain the context type. Exit loop earlier
if NAME result is seen.
gdb/testsuite
* gdb.cp/m-static.cc (gnu_obj_1::~gnu_obj_1): New destructor.
* gdb.cp/m-static.exp: Add tests to print quoted destructor.
Some files managed to get in the tree with outdated copyright years.
This fixes it. Applied.
gdb/
2013-02-12 Pedro Alves <palves@redhat.com>
* break-catch-sig.c: Update copyright years.
gdb/testsuite/
2013-02-12 Pedro Alves <palves@redhat.com>
* gdb.base/catch-signal.c: Update copyright years.
* gdb.base/catch-signal.exp: Update copyright years.
* gdb.dwarf2/dw2-dir-file-name.c: Update copyright years.
* gdb.dwarf2/dw2-dir-file-name.exp: Update copyright years.
* gdb.dwarf2/dw2-empty-pc-range.S: Update copyright years.
* gdb.dwarf2/dw2-error.S: Update copyright years.
* gdb.dwarf2/dw2-error.c: Update copyright years.
* gdb.dwarf2/dw2-restrict.S: Update copyright years.
* gdb.dwarf2/dw2-restrict.c: Update copyright years.
* gdb.dwarf2/dw2-restrict.exp: Update copyright years.
null ptr check to prevent gdbserver from crashing
Evaluating a thread local storage variable in a remote scenario crashes
gdbserver if libthread-db could not be loaded.
2013-02-12 Sanimir Agovic <sanimir.agovic@intel.com>
gdbserver/
* thread-db.c (thread_db_get_tls_address):
NULL pointer check thread_db.
testsuite/
* gdb.server/no-thread-db.exp: New file.
* gdb.server/no-thread-db.c: New file.
* gdb.server/Makefile.in (EXECUTABLES): Add no-thread-db.
(printf_decfloat): New function. Broken out from ui_printf.
Remove unnecessary code to shift the entire format string down.
(printf_pointer): New function.
(ui_printf): Code to print C strings, wide C strings, decfloats,
and pointers moved to separate functions.
2013-02-06 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (GDB/MI Async Records): Document new MI
notification "=tsv-modified". Update the document of MI
notification "=tsv-created".
* observer.texi (GDB Observers): New observer tsv_modified.
Update observer tsv_created and tsv_deleted.
gdb:
2013-02-06 Yao Qi <yao@codesourcery.com>
* mi/mi-interp.c: Include "tracepoint.h".
(mi_tsv_modified): Declare.
(mi_tsv_created, mi_tsv_deleted): Update declaration.
(mi_interpreter_init): Call observer_attach_tsv_modified.
(mi_tsv_modified): New.
(mi_tsv_created, mi_tsv_deleted): Update.
* tracepoint.c (trace_variable_command): Call
observer_notify_tsv_modified if the initial value of tsv is
changed.
(delete_trace_state_variable): Call
observer_notify_tsv_deleted earlier.
(trace_variable_command): Caller update.
(create_tsv_from_upload): Likewise.
* observer.sh: Declare "struct trace_state_variable".
* NEWS: Mention the new MI notification "=tsv-modified".
gdb/testsuite:
2013-02-06 Yao Qi <yao@codesourcery.com>
* gdb.trace/mi-tsv-changed.exp (test_create_delete_tsv): Rename
to ...
(test_create_delete_modify_tsv): ... here. New test on modifying
the initial value of a tsv.
* dwarf2read.c (file_file_name): New function with code from
file_full_name.
(file_full_name): Move most of the code to file_file_name.
(macro_start_file): Rename variable full_name to file_name and use
file_file_name for it. Add comp_dir parameter to new_macro_table.
* macrocmd.c (show_pp_source_pos): New variable fullname. Replace any
macro_source_file->filename access by macro_source_fullname call.
* macroscope.c (_initialize_macroscope): Update the new_macro_table
caller.
* macrotab.c (struct macro_table): New field comp_dir.
(macro_include): New variables link_fullname and source_fullname.
Replace any macro_source_file->filename access by macro_source_fullname
call.
(macro_lookup_inclusion): Remove the partial filenames checking code.
(check_for_redefinition): New variables source_fullname and
found_key_fullname. Replace any macro_source_file->filename access by
macro_source_fullname call.
(macro_undef): New variables source_fullname and key_fullname. Replace
any macro_source_file->filename access by macro_source_fullname call.
(macro_lookup_definition): New variables retval and source_fullname.
Replace any macro_source_file->filename access by macro_source_fullname
call.
(foreach_macro): New variable key_fullname. Replace any
macro_source_file->filename access by macro_source_fullname call.
(foreach_macro_in_scope): New variable datum_fullname. Replace any
macro_source_file->filename access by macro_source_fullname call.
(new_macro_table): Add parameter comp_dir. Initialize T with it.
(macro_source_fullname): New function.
* macrotab.h (struct macro_source_file): Extent the filename field
comment.
(new_macro_table): New parameter comp_dir, add a comment for it.
(macro_source_fullname): new declaration.
gdb/testsuite/
* gdb.linespec/base/one/header.h: New file.
* gdb.linespec/base/two/header.h: New file.
* gdb.linespec/macro-relative.c: New file.
* gdb.linespec/macro-relative.exp: New file.
* dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
to the file_matcher parameter. Pass 0 to it.
(dwarf2_create_include_psymtab): Copy also DIRNAME.
* psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
NULL psymtab_to_fullname result.
(psymtab_to_fullname): Remove variable r. Never return NULL, assemble
an expected filename instead.
(expand_symtabs_matching_via_partial): Add basenames parameter to the
file_matcher parameter. Call also psymtab_to_fullname, after newly
considering BASENAMES_MAY_DIFFER.
* source.c (rewrite_source_path): Remove static.
* source.h (rewrite_source_path): New declaration.
* symfile.h (struct quick_symbol_functions): Add basenames parameter to
the expand_symtabs_matching field. Comment it.
* symtab.c (file_matches): New function comment. Add parameter
basenames, implement it.
(search_symbols_file_matches): Add basenames parameter. Update the
file_matches caller.
(search_symbols): Match FILES also against symtab_to_fullname.
Optimize it for BASENAMES_MAY_DIFFER.
gdb/testsuite/
* gdb.base/fullpath-expand-func.c: New file.
* gdb.base/fullpath-expand.c: New file.
* gdb.base/fullpath-expand.exp: New file.
* gdb.base/realname-expand-real.c: New file.
* gdb.base/realname-expand.c: New file.
* gdb.base/realname-expand.exp: New file.
