I noticed that dwarf2_free_objfile can be made static, by changing it
to be a registry cleanup function. This simplifies the code, as well,
because now symbol readers don't have to explicitly call it.
Tested by the buildbot.
gdb/ChangeLog
2018-06-28 Tom Tromey <tom@tromey.com>
* coffread.c (coff_symfile_finish): Update.
* xcoffread.c (xcoff_symfile_finish): Update.
* elfread.c (elf_symfile_finish): Update.
* symfile.h (dwarf2_free_objfile): Don't declare.
* dwarf2read.c (_initialize_dwarf2_read): Use
register_objfile_data_with_cleanup.
(dwarf2_free_objfile): Now static. Change signature.
This patch fixes a unique condition where GDB fails to provide line
information of symbol at address zero when code is compiled with text
address zero but loaded at an offset > 0.
For example lets compile following code snippet:
int main() {
return 0;
}
gcc -O0 -g3 -nostdlib -emain -Wl,-Ttext=0x00 -o file.out file.c
Start gdb and run:
add-symbol-file file.out 0xffff0000
info line main
GDB will return error saying no line info is available for the symbol.
This is a direct consequence of the fix for PR 12528 where GDB tries to ignore
line table for a function which has been garbage collected by the linker.
As the garbage collected symbols are sent to address zero GDB assumes a symbol
actually placed at address zero as garbage collected.
This was fixed with an additional check address < lowpc. But when symbol is
loaded at an offset lowpc becomes lowpc + offset while no offset is added to
address rather final symbol address is calculated based on baseaddr and address
added together. So in case where symbols are loaded at an offset the condition
address < lowpc will always return true.
This patch fixes this by comparing address against a non offset lowpc.
This patch also adds a GDB test case to replicate this behavior.
gdb:
2018-06-27 Omair Javaid <omair.javaid@linaro.org>
PR gdb/21695
* dwarf2read.c (lnp_state_machine::check_line_address): Update declaration.
(dwarf_decode_lines_1): Adjust.
gdb/testsuite:
2018-06-27 Omair Javaid <omair.javaid@linaro.org>
PR gdb/21695
* gdb.base/infoline-reloc-main-from-zero.exp: New test.
* gdb.base/infoline-reloc-main-from-zero.c: New file.
Since we now have two index formats, DWARF5/debug_names and gdb_index, I
wanted to rename some functions to make it clear that they deal with the
gdb_index format specifically.
gdb/ChangeLog:
* dwarf2read.c (read_index_from_section): Rename to...
(read_gdb_index_from_section): ... this, update all callers.
(dwarf2_read_index): Rename to...
(dwarf2_read_gdb_index): ... this, update all callers.
GCC 6.3.0 produces this kind of errors:
CXX dwarf2read.o
/home/simark/src/binutils-gdb/gdb/dwarf2read.c: In function 'void process_cu_includes(dwarf2_per_objfile*)':
/home/simark/src/binutils-gdb/gdb/dwarf2read.c:10220:8: error: types may not be defined in a for-range-declaration [-Werror]
for (struct dwarf2_per_cu_data *iter : dwarf2_per_objfile->just_read_cus)
^~~~~~
Removing the struct keyword makes it happy.
gdb/ChangeLog:
* dwarf2read.c (process_cu_includes): Remove struct keyword.
* serial.c (serial_interface_lookup): Remove struct keyword.
This removes a VEC from dwarf2read.c, replacing it with a std::vector.
Tested by the buildbot.
gdb/ChangeLog
2018-06-09 Tom Tromey <tom@tromey.com>
* dwarf2read.c (process_cu_includes): Update.
(process_full_comp_unit): Update.
* dwarf2read.h (struct dwarf2_per_objfile) <just_read_cus>: Now a
std::vector.
TYPE_TAG_NAME has been an occasional source of confusion and bugs. It
seems to me that it is only useful for C and C++ -- but even there,
not so much, because at least with DWARF there doesn't seem to be any
way to wind up with a type where the name and the tag name are both
non-NULL and different.
So, this patch removes TYPE_TAG_NAME entirely. This should save a
little memory, but more importantly, it simplifies this part of gdb.
A few minor test suite adjustments were needed. In some situations
the new code does not yield identical output to the old code.
gdb/ChangeLog
2018-06-01 Tom Tromey <tom@tromey.com>
* valops.c (enum_constant_from_type, value_namespace_elt)
(value_maybe_namespace_elt): Update.
* valarith.c (find_size_for_pointer_math): Update.
* target-descriptions.c (make_gdb_type): Update.
* symmisc.c (print_symbol): Update.
* stabsread.c (define_symbol, read_type)
(complain_about_struct_wipeout, add_undefined_type)
(cleanup_undefined_types_1): Update.
* rust-lang.c (rust_tuple_type_p, rust_slice_type_p)
(rust_range_type_p, val_print_struct, rust_print_struct_def)
(rust_internal_print_type, rust_composite_type)
(rust_evaluate_funcall, rust_evaluate_subexp)
(rust_inclusive_range_type_p): Update.
* python/py-type.c (typy_get_tag): Update.
* p-typeprint.c (pascal_type_print_base): Update.
* mdebugread.c (parse_symbol, parse_type): Update.
* m2-typeprint.c (m2_long_set, m2_record_fields, m2_enum):
Update.
* guile/scm-type.c (gdbscm_type_tag): Update.
* go-lang.c (sixg_string_p): Update.
* gnu-v3-abi.c (build_gdb_vtable_type, build_std_type_info_type):
Update.
* gdbtypes.h (struct main_type) <tag_name>: Remove.
(TYPE_TAG_NAME): Remove.
* gdbtypes.c (type_name_no_tag): Simplify.
(check_typedef, check_types_equal, recursive_dump_type)
(copy_type_recursive, arch_composite_type): Update.
* f-typeprint.c (f_type_print_base): Update. Print "Type" prefix
in summary mode when needed.
* eval.c (evaluate_funcall): Update.
* dwarf2read.c (fixup_go_packaging, read_structure_type)
(process_structure_scope, read_enumeration_type)
(read_namespace_type, read_module_type, determine_prefix): Update.
* cp-support.c (inspect_type): Update.
* coffread.c (process_coff_symbol, decode_base_type): Update.
* c-varobj.c (c_is_path_expr_parent): Update.
* c-typeprint.c (c_type_print_base_struct_union): Update.
(c_type_print_base_1): Update. Print struct/class/union/enum in
summary when using C language.
* ax-gdb.c (gen_struct_ref, gen_namespace_elt)
(gen_maybe_namespace_elt): Update.
* ada-lang.c (ada_type_name): Simplify.
(empty_record, ada_template_to_fixed_record_type_1)
(template_to_static_fixed_type)
(to_record_with_fixed_variant_part, ada_check_typedef): Update.
gdb/testsuite/ChangeLog
2018-06-01 Tom Tromey <tom@tromey.com>
* gdb.xml/tdesc-regs.exp (load_description): Update expected
results.
* gdb.dwarf2/method-ptr.exp: Set language to C++.
* gdb.dwarf2/member-ptr-forwardref.exp: Set language to C++.
* gdb.cp/typeid.exp (do_typeid_tests): Update type_re.
* gdb.base/maint.exp (maint_pass_if): Update.
Currently dwarf2read.c will pass the CU's language to
c_type_print_args -- but this doesn't affect all aspects of type
printing, because some code in c-typeprint.c refers to
current_language.
This patch threads the language through more of the type printing
code, adding an overload to c_type_print. Some uses of
current_language remain, but now they are only in top-level functions.
gdb/ChangeLog
2018-06-01 Tom Tromey <tom@tromey.com>
* dwarf2read.c (dwarf2_compute_name): Pass CU's language to
c_print_type.
* c-typeprint.c (c_print_type_1): Add "language" parameter.
(c_print_type): Update.
(c_print_type): New overload.
(c_type_print_varspec_prefix, c_type_print_args)
(c_type_print_varspec_suffix, c_print_type_no_offsets)
(c_type_print_base_struct_union, c_type_print_base_1)
(cp_type_print_method_args): Add "language" parameter.
(c_type_print_base): Update.
* c-lang.h (c_print_type): Add new overload.
I get this kind of errors with GCC 6.3.0:
/home/simark/src/binutils-gdb/gdb/breakpoint.c: In function 'void print_solib_event(int)':
/home/simark/src/binutils-gdb/gdb/breakpoint.c:4618:12: error: types may not be defined in a for-range-declaration [-Werror]
for (struct so_list *iter : current_program_space->added_solibs)
^~~~~~
Removing the struct keyword makes it happy.
gdb/ChangeLog:
* breakpoint.c (print_solib_event, check_status_catch_solib):
Remove struct keyword in range-based for loops.
* dbxread.c (find_corresponding_bincl_psymtab): Likewise.
* dwarf2read.c (compute_delayed_physnames, rust_union_quirks);
Likewise.
* linespec.c (find_superclass_methods, search_minsyms_for_name):
Likewise.
* symfile.c (addr_info_make_relative): Likewise.
* thread.c (value_in_thread_stack_temporaries): Likewise.
This changes dwarf2_read_debug_names to use std::unique_ptr from the
outset. This simplifies the code that installs the resulting map into
dwarf2_per_objfile.
Tested by the buildbot.
ChangeLog
2018-05-21 Tom Tromey <tom@tromey.com>
* dwarf2read.c (dwarf2_read_debug_names): Use std::unique_ptr.
(mapped_index_base): Use DISABLE_COPY_AND_ASSIGN. Default
constructor.
This adds a constructor to struct dwz_file and arranges for it to be
allocated with "new" and wrapped in a unique_ptr. This cuts down on
the amount of manual memory management that must be done.
Regression tested by the buildbot.
gdb/ChangeLog
2018-05-18 Tom Tromey <tom@tromey.com>
* dwarf2read.c (struct dwz_file): Add constructor, initializers.
<dwz_bfd>: Now a gdb_bfd_ref_ptr.
(~dwarf2_per_objfile): Update
(dwarf2_get_dwz_file): Use new.
* dwarf2read.h (struct dwarf2_per_objfile) <dwz_file>: Now a
unique_ptr.
This adds a constructor and initializer to dwp_file and changes it to
be allocated with "new". This removes a bit of manual refcount
management.
Tested by the buildbot.
gdb/ChangeLog
2018-05-18 Tom Tromey <tom@tromey.com>
* dwarf2read.h (struct dwarf2_per_objfile) <dwp_file>: Now a
unique_ptr.
* dwarf2read.c (struct dwp_file): Add constructor and
initializers.
(open_and_init_dwp_file): Return a unique_ptr.
(dwarf2_per_objfile, create_dwp_hash_table)
(create_dwo_unit_in_dwp_v1, create_dwo_unit_in_dwp_v2)
(lookup_dwo_unit_in_dwp): Update.
(open_and_init_dwp_file, get_dwp_file): Update.
This changes struct mapped_index to be allocated with new. This
simplifies the creation a bit (see dwarf2_read_index) and also removes
a somewhat ugly explicit destructor call from ~dwarf2_per_objfile.
Tested by the buildbot.
gdb/ChangeLog
2018-05-18 Tom Tromey <tom@tromey.com>
* dwarf2read.c (dwarf2_per_objfile): Update.
(struct mapped_index): Add initializers.
(dwarf2_read_index): Use new.
(dw2_symtab_iter_init): Update.
* dwarf2read.h (struct dwarf2_per_objfile) <index_table>: Now a
unique_ptr.
PR symtab/23010 reports a crash that occurs when using -readnow
on a dwz-generated debuginfo file.
The crash occurs because the DWARF has a partial CU with no language
set, and then a full CU that references this partial CU using
DW_AT_abstract_origin.
In this case, the partial CU is read by dw2_expand_all_symtabs using
language_minimal; but then this conflicts with the creation of the
block's symbol table in the C++ CU.
This patch fixes the problem by arranging for partial CUs not to be
read by -readnow. I tend to think that it doesn't make sense to read
a partial CU in isolation -- they should only be read when imported
into some other CU.
In conjunction with some other patches I am going to post, this also
fixes the Rust -readnow crash that Jan reported.
There are two problems with this patch:
1. It is difficult to reason about. There are many cases where I've
patched the code to call init_cutu_and_read_dies with the flag set
to "please do read partial units" -- but I find it difficult to be
sure that this is always correct.
2. It is still missing a standalone test case. This seemed hard.
2018-05-17 Tom Tromey <tom@tromey.com>
PR symtab/23010:
* dwarf2read.c (load_cu, dw2_do_instantiate_symtab)
(dw2_instantiate_symtab): Add skip_partial parameter.
(dw2_find_last_source_symtab, dw2_map_expand_apply)
(dw2_lookup_symbol, dw2_expand_symtabs_for_function)
(dw2_expand_all_symtabs, dw2_expand_symtabs_with_fullname)
(dw2_expand_symtabs_matching_one)
(dw2_find_pc_sect_compunit_symtab)
(dw2_debug_names_lookup_symbol)
(dw2_debug_names_expand_symtabs_for_function): Update.
(init_cutu_and_read_dies): Add skip_partial parameter.
(process_psymtab_comp_unit, build_type_psymtabs_1)
(process_skeletonless_type_unit, load_partial_comp_unit)
(psymtab_to_symtab_1): Update.
(load_full_comp_unit): Add skip_partial parameter.
(process_imported_unit_die, dwarf2_read_addr_index)
(follow_die_offset, dwarf2_fetch_die_loc_sect_off)
(dwarf2_fetch_constant_bytes, dwarf2_fetch_die_type_sect_off)
(read_signatured_type): Update.
It turns out that a dwarf2_cu can remain allocated after psymtab
expansion is done, and so it makes sense to clear rust_unions when
done processing it.
Tested on x86-64 Fedora 27.
2018-05-14 Tom Tromey <tom@tromey.com>
* dwarf2read.c (rust_union_quirks): Clear rust_unions.
This adds some basic type alignment support to gdb. It changes struct
type to store the alignment, and updates dwarf2read.c to handle
DW_AT_alignment. It also adds a new gdbarch method and updates
i386-tdep.c.
None of this new functionality is used anywhere yet, so tests will
wait until the next patch.
2018-04-30 Tom Tromey <tom@tromey.com>
* i386-tdep.c (i386_type_align): New function.
(i386_gdbarch_init): Update.
* gdbarch.sh (type_align): New method.
* gdbarch.c, gdbarch.h: Rebuild.
* arch-utils.h (default_type_align): Declare.
* arch-utils.c (default_type_align): New function.
* gdbtypes.h (TYPE_ALIGN_BITS): New define.
(struct type) <align_log2>: New field.
<instance_flags>: Now a bitfield.
(TYPE_RAW_ALIGN): New macro.
(type_align, type_raw_align, set_type_align): Declare.
* gdbtypes.c (type_align, type_raw_align, set_type_align): New
functions.
* dwarf2read.c (quirk_rust_enum): Set type alignment.
(get_alignment, maybe_set_alignment): New functions.
(read_structure_type, read_enumeration_type, read_array_type)
(read_set_type, read_tag_pointer_type, read_tag_reference_type)
(read_subrange_type, read_base_type): Set type alignment.
I noticed the existence of -Wsuggest-override and so this patch
enables it for gdb. It found a few spots that could use "override".
Also I went ahead and removed all uses of the "OVERRIDE" macro.
Using override is beneficial because it makes it harder to change a
base class and then forget to change a derived class.
Tested by the buildbot.
ChangeLog
2018-04-27 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* warning.m4 (AM_GDB_WARNINGS): Add -Wsuggest-override.
* dwarf2loc.c (class dwarf_evaluate_loc_desc): Use "override", not
"OVERRIDE".
(class symbol_needs_eval_context): Likewise.
* dwarf2read.c (mock_mapped_index::symbol_name_count)
(mock_mapped_index::symbol_name_at): Use "override". Remove
"virtual".
* dwarf2-frame.c (dwarf_expr_executor::get_addr_index): Use
"override".
(class dwarf_expr_executor): Use "override", not "OVERRIDE".
* aarch64-tdep.c (instruction_reader::read): Use "override".
(instruction_reader_test::read): Likewise.
* arm-tdep.c (instruction_reader::read): Use "override".
(instruction_reader_thumb::read): Likewise.
gdbserver/ChangeLog
2018-04-27 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
While debugging the crash that Jan reported, I noticed that in some
situations we could end up with a situation where one branch of a Rust
enum type ended up with a field count of -1.
The fix is simple: only conditionally drop the discriminant field when
rewriting the enum variants.
I couldn't find a way to test this; I only noticed it while debugging
the DWARF reader.
2018-04-17 Tom Tromey <tom@tromey.com>
* dwarf2read.c (quirk_rust_enum): Conditionally drop the
discriminant field.
I noticed that quirk_rust_enum can crash when presented with a union
whose fields are all scalar types.
This patch adds a new test case and fixes the bug.
Regression tested on Fedora 26 x86-64.
2018-04-17 Tom Tromey <tom@tromey.com>
* dwarf2read.c (quirk_rust_enum): Handle unions correctly.
2018-04-17 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.rs (Union): New type.
(main): New local "u".
* gdb.rust/simple.exp (test_one_slice): Add new test case.
This patch removes some usages of get_dwarf2_per_objfile, where we can
get hold of the dwarf2_per_objfile object in a simpler way. For
example, it's simpler (and slightly less work) to pass
dwarf2_per_objfile and get the objfile from it than to pass the objfile
and call get_dwarf2_per_objfile.
Ideally, get_dwarf2_per_objfile should only be used in the entry points
of the dwarf2 code, where we receive an objfile.
gdb/ChangeLog:
* dwarf2read.c (create_cus_from_index_list): Replace objfile arg
with dwarf2_per_objfile.
(create_cus_from_index): Likewise.
(create_signatured_type_table_from_index): Likewise.
(dwarf2_read_index): Likewise.
(dwarf2_initialize_objfile): Likewise.
(dwarf2_fetch_die_loc_sect_off): Get dwarf2_per_objfile from
per_cu rather than get_dwarf2_per_objfile.
Those two functions look like good candidates to become methods of
dwarf2_per_objfile. I did that, and added get_tu as well. When
replacing usages of dw2_get_cutu, I changed some instances to get_cutu
and others to get_cu, when appropriate (when we know we want a CU and
not a TU).
gdb/ChangeLog:
* dwarf2read.h (struct signatured_type): Forward declare.
(struct dwarf2_per_objfile) <get_cutu, get_cu, get_tu>:
New methods.
* dwarf2read.c (dwarf2_per_objfile::get_cutu): Rename from...
(dw2_get_cutu): ...this.
(dwarf2_per_objfile::get_cu): Rename from...
(dw2_get_cu): ...this.
(dwarf2_per_objfile::get_tu): New.
(create_addrmap_from_index): Adjust.
(create_addrmap_from_aranges): Adjust.
(dw2_find_last_source_symtab): Adjust.
(dw2_map_symtabs_matching_filename): Adjust.
(dw2_symtab_iter_next): Adjust.
(dw2_print_stats): Adjust.
(dw2_expand_all_symtabs): Adjust.
(dw2_expand_symtabs_with_fullname): Adjust.
(dw2_expand_marked_cus): Adjust.
(dw_expand_symtabs_matching_file_matcher): Adjust.
(dw2_map_symbol_filenames): Adjust.
(dw2_debug_names_iterator::next): Adjust.
(dwarf2_initialize_objfile): Adjust.
(set_partial_user): Adjust.
(dwarf2_build_psymtabs_hard): Adjust.
Most of them are obvious. The ones in dwarf2_record_block_ranges are
less obvious, because it is a bit suspicious to have that many
variables unused. But after inspection, it seems like it dates from
commit 5f46c5a548 ("Code cleanup: Split dwarf2_ranges_read to a
callback"), where dwarf2_record_block_ranges was made to use
dwarf2_ranges_process, which contains the same functionality.
gdb/ChangeLog:
* dwarf2read.c (create_signatured_type_table_from_debug_names):
Remove unused variables.
(dw2_map_symtabs_matching_filename): Likewise.
(dwarf2_record_block_ranges): Likewise.
(dwarf2_read_addr_index): Likewise.
(follow_die_offset): Likewise.
struct value is internally reference counted and so, while it also has
some ownership rules unique to it, it makes sense to use a gdb_ref_ptr
when managing it automatically.
This patch removes the existing unique_ptr specialization in favor of
a reference-counted pointer. It also introduces two other
clarifications:
1. Rename value_free to value_decref, which I think is more in line
with what the function actually does; and
2. Change release_value to return a gdb_ref_ptr. This change allows
us to remove the confusing release_value_or_incref function,
primarily by making it much simpler to reason about the result of
release_value.
gdb/ChangeLog
2018-04-06 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_clear_saved_item)
(update_dynamic_varobj_children, install_new_value, ~varobj):
Update.
* value.h (value_incref): Move declaration earlier.
(value_decref): Rename from value_free.
(struct value_ref_policy): New.
(value_ref_ptr): New typedef.
(struct value_deleter): Remove.
(gdb_value_up): Remove typedef.
(release_value): Change return type.
(release_value_or_incref): Remove.
* value.c (set_value_parent): Update.
(value_incref): Change return type.
(value_decref): Rename from value_free.
(value_free_to_mark, free_all_values, free_value_chain): Update.
(release_value): Return value_ref_ptr.
(release_value_or_incref): Remove.
(record_latest_value, set_internalvar, clear_internalvar):
Update.
* stack.c (info_frame_command): Don't call value_free.
* python/py-value.c (valpy_dealloc, valpy_new)
(value_to_value_object): Update.
* printcmd.c (do_examine): Update.
* opencl-lang.c (lval_func_free_closure): Update.
* mi/mi-main.c (register_changed_p): Don't call value_free.
* mep-tdep.c (mep_frame_prev_register): Don't call value_free.
* m88k-tdep.c (m88k_frame_prev_register): Don't call value_free.
* m68hc11-tdep.c (m68hc11_frame_prev_register): Don't call
value_free.
* guile/scm-value.c (vlscm_free_value_smob)
(vlscm_scm_from_value): Update.
* frame.c (frame_register_unwind, frame_unwind_register_signed)
(frame_unwind_register_unsigned, get_frame_register_bytes)
(put_frame_register_bytes): Don't call value_free.
* findvar.c (address_from_register): Don't call value_free.
* dwarf2read.c (dwarf2_compute_name): Don't call value_free.
* dwarf2loc.c (entry_data_value_free_closure)
(value_of_dwarf_reg_entry, free_pieced_value_closure)
(dwarf2_evaluate_loc_desc_full): Update.
* breakpoint.c (update_watchpoint, breakpoint_init_inferior)
(~bpstats, bpstats, bpstat_clear_actions, watchpoint_check)
(~watchpoint, watch_command_1)
(invalidate_bp_value_on_memory_change): Update.
* alpha-tdep.c (alpha_register_to_value): Don't call value_free.
This removes free_dwo_file_cleanup, the last cleanup in dwarf2read.c.
This is replaced with a unique_ptr; which, despite the fact that a
dwo_file is obstack-allocated, seemed like the best fit.
gdb/ChangeLog
2018-03-30 Tom Tromey <tom@tromey.com>
* dwarf2read.c (struct free_dwo_file_cleanup_data): Remove.
(struct dwo_file_deleter): New.
(dwo_file_up): New typedef.
(open_and_init_dwo_file): Use dwo_file_up.
(free_dwo_file_cleanup): Remove.
The objfile parameter to free_dwo_file is unused, so remove it.
gdb/ChangeLog
2018-03-30 Tom Tromey <tom@tromey.com>
* dwarf2read.c (free_dwo_file): Remove "objfile" parameter.
(free_dwo_file_cleanup, free_dwo_file_from_slot): Update.
This changes free_cached_comp_units from a cleanup function to an RAII
class.
gdb/ChangeLog
2018-03-30 Tom Tromey <tom@tromey.com>
* dwarf2read.c (class free_cached_comp_units): New class.
(dw2_instantiate_symtab, dwarf2_build_psymtabs_hard): Use it.
(free_cached_comp_units): Remove function.
I want to add a DWARF index-related feature (automatically produce index
files when loading objfiles in GDB), but I don't want to add many
hundred lines to the already too big dwarf2read.c. I thought it would
be a logical split to move everything related to the DWARF index to its
own file.
I first tried to move everything that reads and writes DWARF indices to
a separate file, but found that the "read" part is a little bit
entangled with the rest of dwarf2read.c, so the line is hard to draw
about where to split. The write part is quite isolated though, so I
moved this part to a new file, dwarf-index-write.c. Some things are
necessary to both reading and writing indices, so I placed them in
dwarf-index-common.{c,h}. The idea would be to have a
dwarf-index-read.c eventually that would use it too (for now that code
is still in dwarf2read.c).
This required moving some things to a new dwarf2read.h header, so they
can be read by the code that writes the index.
The patch is big in number of lines, but it's all existing code being
moved around. The only changes are that some functions are not static
anymore, a declaration is added in a .h file, and therefore the comment
is moved there.
I built-tested it with a little and big endian target.
This patch is also available on the users/simark/split-dwarf2read
branch.
gdb/ChangeLog:
* Makefile.in (COMMON_SFILES): Add dwarf-index-common.c and
dwarf-index-write.c
(HFILES_NO_SRCDIR): Add dwarf-index-common.h and dwarf2read.h.
* dwarf-index-common.c: New file.
* dwarf-index-common.h: New file.
* dwarf-index-write.c: New file.
* dwarf2read.c: Include dwarf2read.h and dwarf-index-common.h.
(struct dwarf2_section_info): Move from here.
(dwarf2_section_info_def): Likewise.
(DEF_VEC_O (dwarf2_section_info_def)): Likewise.
(offset_type): Likewise.
(DW2_GDB_INDEX_SYMBOL_STATIC_SET_VALUE): Likewise.
(DW2_GDB_INDEX_SYMBOL_KIND_SET_VALUE): Likewise.
(DW2_GDB_INDEX_CU_SET_VALUE): Likewise.
(byte_swap): Likewise.
(MAYBE_SWAP): Likewise.
(dwarf2_per_cu_ptr): Likewise.
(DEF_VEC_P (dwarf2_per_cu_ptr)): Likewise.
(struct tu_stats): Likewise.
(struct dwarf2_per_objfile): Likewise.
(struct dwarf2_per_cu_data): Likewise.
(struct signatured_type): Likewise.
(sig_type_ptr): Likewise.
(DEF_VEC_P (sig_type_ptr)): Likewise.
(INDEX4_SUFFIX): Likewise.
(INDEX5_SUFFIX): Likewise.
(DEBUG_STR_SUFFIX): Likewise.
(dwarf2_read_section): Make non-static.
(mapped_index_string_hash): Move from here.
(dwarf5_djb_hash): Likewise.
(file_write): Likewise.
(class data_buf): Likewise.
(struct symtab_index_entry): Likewise.
(struct mapped_symtab): Likewise.
(find_slot): Likewise.
(hash_expand): Likewise.
(add_index_entry): Likewise.
(uniquify_cu_indices): Likewise.
(class c_str_view): Likewise.
(class c_str_view_hasher): Likewise.
(class vector_hasher): Likewise.
(write_hash_table): Likewise.
(psym_index_map): Likewise.
(struct addrmap_index_data): Likewise.
(add_address_entry): Likewise.
(add_address_entry_worker): Likewise.
(write_address_map): Likewise.
(symbol_kind): Likewise.
(write_psymbols): Likewise.
(struct signatured_type_index_data): Likewise.
(write_one_signatured_type): Likewise.
(recursively_count_psymbols): Likewise.
(recursively_write_psymbols): Likewise.
(class debug_names): Likewise.
(check_dwarf64_offsets): Likewise.
(psyms_seen_size): Likewise.
(write_gdbindex): Likewise.
(write_debug_names): Likewise.
(assert_file_size): Likewise.
(write_psymtabs_to_index): Likewise.
(save_gdb_index_command): Likewise.
(_initialize_dwarf2_read): Don't register the "save gdb-index"
command.
* dwarf2read.h: New file.
This patch fixes a known failure in gdb.ada/maint_with_ada.exp
(maintenance check-psymtabs). Another way to witness the same
issue is by considering the following Ada declarations...
type Wrapper is record
A : Integer;
end record;
u00045 : constant Wrapper := (A => 16#060287af#);
pragma Export (C, u00045, "symada__cS");
... which declares a variable name "u00045" but with a linkage
name which is "symada__cS". This variable is a record with one
component, the Ada equivalent of a struct with one field in C.
Trying to print that variable's value currently yields:
(gdb) p /x <symada__cS>
'symada(char, signed)' has unknown type; cast it to its declared type
This indicates that GDB was only able to find the minimal symbol,
but not the full symbol. The expected output is:
(gdb) print /x <symada__cS>
$1 = (a => 0x60287af)
The error message gives a hint about what's happening: We processed
the symbol through gdb_demangle, which in the case of this particular
symbol name, ends up matching the C++ naming scheme. As a result,
the demangler transforms our symbol name into 'symada(char, signed)',
thus breaking Ada lookups.
This patch fixes the issue by first introducing a new language_defn
attribute called la_store_sym_names_in_linkage_form_p, which is a boolean
to be set to true for the few languages that do not want their symbols
to have their names stored in demangled form, and false otherwise.
We then use this language attribute to skip the call to gdb_demangle
for all languages whose la_store_sym_names_in_linkage_form_p is true.
In terms of the selection of languages for which the new attribute
is set to true, the selection errs on the side of preserving the
existing behavior, and only changes the behavior for the languages
where we are certain storing symbol names in demangling form is not
needed. It is conceivable that other languages might be in the same
situation, but I not knowing in detail the symbol name enconding
strategy, I decided to play it safe and let other language maintainers
potentially adjust their language if it makes sense to do so.
gdb/ChangeLog:
PR gdb/22670
* dwarf2read.c (dwarf2_physname): Do not return the demangled
symbol name if the CU's language stores symbol names in linkage
format.
* language.h (struct language_defn)
<la_store_sym_names_in_linkage_form_p>: New field. Adjust
all instances of this struct.
gdb/testsuite/ChangeLog:
* gdb.ada/maint_with_ada.exp: Remove PR gdb/22670 setup_kfail.
* gdb.ada/notcplusplus: New testcase.
* gdb.base/c-linkage-name.c: New file.
* gdb.base/c-linkage-name.exp: New testcase.
Tested on x86_64-linux.
This also passes AdaCore's internal GDB testsuite.
c++/22968 involves the inability of ptype to find a type definition for
a type defined inside another type. I recently added some additional
support for nested type definitions, but I apparently overlooked psymbols.
The user reports that using -readnow fixes the problem:
$ gdb 22968 -ex "ptype Outer::Inner"
There is no field named Inner
$ gdb -readnow 22968 -ex "ptype Outer::Inner"
type = struct Outer::Inner {
<no data field>
}
We clearly did not find a psymbol for Outer::Inner because it was located
in another CU. This patch addresses this problem by scanning structs
for additional psymbols. Rust is already doing this.
With this patch, the identical result to "-readnow" is given (without
using `-readnow', of course).
gdb/ChangeLog:
PR c++/22968
* dwarf2read.c (scan_partial_symbols): Scan structs/classes for
nested type definitions for C++, too.
gdb/testsuite/ChangeLog:
PR c++/22968
* gdb.cp/subtypes.exp: New file.
* gdb.cp/subtypes.h: New file.
* gdb.cp/subtypes.cc: New file.
* gdb.cp/subtypes-2.cc: New file.
This changes dwarf2read.c to use std::vector rather than a linked list
when managing the fields and base classes to be added to a type. This
removes some bookkeeping types and also allows the removal of some
cleanups.
gdb/ChangeLog
2018-03-11 Tom Tromey <tom@tromey.com>
* dwarf2read.c (struct nextfield): Add initializers.
(struct nextfnfield): Remove.
(struct fnfieldlist): Add initializers. Remove "length" and
"head", use std::vector.
(struct decl_field_list): Remove.
(struct field_info): Add initializers.
<fields, baseclasses>: Now std::vector.
<nbaseclasses, nfnfields, typedef_field_list_count,
nested_types_list_count>: Remove.
(dwarf2_add_field, dwarf2_add_type_defn)
(dwarf2_attach_fields_to_type, dwarf2_add_member_fn)
(dwarf2_attach_fn_fields_to_type, handle_struct_member_die)
(process_structure_scope): Update.
This removes a cleanup from build_type_psymtabs_1, by using
std::vector rather than manual memory management.
gdb/ChangeLog
2018-03-11 Tom Tromey <tom@tromey.com>
* dwarf2read.c (sort_tu_by_abbrev_offset): Change to be suitable
for use by std::sort.
(build_type_psymtabs_1): Use std::vector.
Pedro pointed out that some Rust tests were failing after the recent
enum change. I was able to reproduce this even with the most current
Rust compiler -- no test was failing, but rather the gdb internal
error was causing an "untested" result, which I didn't notice.
The internal error is caused by a bad assertion in
alloc_discriminant_info. This happened because, in an earlier version
of the patch, the discriminant could only appear at index 0. However,
it can now appear anywhere. This patch fixes the assertion in the
obvious way, and adds a second assertion to ensure that the
discriminant is also correct.
Fixing this revealed a real failure, which was caused by using the
wrong base name when computing the name of a univariant enum's sole
member. This is also fixed here.
Tested by running the gdb.rust tests with rustc 1.23 and
double-checking the summary:
# of expected passes 276
Note that if you try this yourself, it is still possible to get an
"untested" result from traits.exp if your Rust compiler is old enough.
2018-03-01 Tom Tromey <tom@tromey.com>
* dwarf2read.c (alloc_discriminant_info): Fix default_index
assertion. Add assertion for discriminant_index.
(quirk_rust_enum): Use correct base type name in univariant case.
This commit moves the path manipulation routines found on utils.c to a
new common/pathstuff.c, and updates the Makefile.in's accordingly.
The routines moved are "gdb_realpath", "gdb_realpath_keepfile" and
"gdb_abspath".
This will be needed because gdbserver will have to call "gdb_abspath"
on my next patch, which implements a way to expand the path of the
inferior provided by the user in order to allow specifying just the
binary name when starting gdbserver, like:
$ gdbserver :1234 a.out
With the recent addition of the startup-with-shell feature on
gdbserver, this scenario doesn't work anymore if the user doesn't have
the current directory listed in the PATH variable.
I had to do a minor adjustment on "gdb_abspath" because we don't have
access to "tilde_expand" on gdbserver, so now the function is using
"gdb_tilde_expand" instead. Otherwise, the code is the same.
Regression tested on the BuildBot, without regressions.
gdb/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (COMMON_SFILES): Add "common/pathstuff.c".
(HFILES_NO_SRCDIR): Add "common/pathstuff.h".
* auto-load.c: Include "common/pathstuff.h".
* common/common-def.h (current_directory): Move here.
* common/gdb_tilde_expand.c (gdb_tilde_expand_up): New
function.
* common/gdb_tilde_expand.h (gdb_tilde_expand_up): New
prototype.
* common/pathstuff.c: New file.
* common/pathstuff.h: New file.
* compile/compile.c: Include "common/pathstuff.h".
* defs.h (current_directory): Move to "common/common-defs.h".
* dwarf2read.c: Include "common/pathstuff.h".
* exec.c: Likewise.
* guile/scm-safe-call.c: Likewise.
* linux-thread-db.c: Likewise.
* main.c: Likewise.
* nto-tdep.c: Likewise.
* objfiles.c: Likewise.
* source.c: Likewise.
* symtab.c: Likewise.
* utils.c: Include "common/pathstuff.h".
(gdb_realpath): Move to "common/pathstuff.c".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
* utils.h (gdb_realpath): Move to "common/pathstuff.h".
(gdb_realpath_keepfile): Likewise.
(gdb_abspath): Likewise.
gdb/gdbserver/ChangeLog:
2018-02-28 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add "$(srcdir)/common/pathstuff.c".
(OBJS): Add "pathstuff.o".
* server.c (current_directory): New global variable.
(captured_main): Initialize "current_directory".
This changes dwarf2read to understand DW_TAG_variant_part and
DW_TAG_variant.
Note that DW_AT_discr_list is not handled. I did not need this for
Rust. I imagine this should not be too hard to add later, should
someone need it. Meanwhile I have gdb emit a complaint if it is seen.
There is a lurking issue concerning the placement of the discriminant
in the DWARF. For Rust, I ended up following the letter of the
standard and having the discriminant be a child of the
DW_TAG_variant_part. However, GCC's Ada support does not do this.
Pierre-Marie filed this with the DWARF committee:
http://dwarfstd.org/ShowIssue.php?issue=180123.1
However as that is read-only, if you have comments you might consider
adding them to the GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83935
Finally, there is a DWARF extension lurking in here. In Rust, a
univariant enum will not have a discriminant. However, in order to
unify the representation of all data-carrying enums, I've made LLVM
(and my forthcoming rustc patch) emit a univariant enum using a
DW_TAG_variant with a single variant part and without DW_AT_discr.
The lack of this DW_AT_discr is the extension. I will submit an issue
on dwarfstd.org about this.
2018-02-26 Tom Tromey <tom@tromey.com>
* dwarf2read.c (struct variant_field): New.
(struct nextfield) <variant>: New field.
(dwarf2_add_field): Handle DW_TAG_variant_part.
(dwarf2_attach_fields_to_type): Attach a discriminant_info to a
discriminated union.
(read_structure_type): Handle DW_TAG_variant_part.
(handle_struct_member_die): New function, extracted from
process_structure_scope. Handle DW_TAG_variant.
(process_structure_scope): Handle discriminated unions. Call
handle_struct_member_die.
2018-02-26 Tom Tromey <tom@tromey.com>
* gdb.dwarf2/variant.c: New file.
* gdb.dwarf2/variant.exp: New file.
A Rust enum is, essentially, a discriminated union. Currently the
Rust language support handles Rust enums locally, in rust-lang.c.
However, because I am changing the Rust compiler to use
DW_TAG_variant* to represent enums, it seemed better to have a single
internal representation for Rust enums in gdb.
This patch implements this idea by moving the current Rust enum
handling code to dwarf2read. This allows the simplification of some
parts of rust-lang.c as well.
2018-02-26 Tom Tromey <tom@tromey.com>
* rust-lang.h (rust_last_path_segment): Declare.
* rust-lang.c (rust_last_path_segment): Now public. Change
contract.
(struct disr_info): Remove.
(RUST_ENUM_PREFIX, RUST_ENCODED_ENUM_REAL)
(RUST_ENCODED_ENUM_HIDDEN, rust_union_is_untagged)
(rust_get_disr_info, rust_tuple_variant_type_p): Remove.
(rust_enum_p, rust_enum_variant): New function.
(rust_underscore_fields): Remove "offset" parameter.
(rust_print_enum): New function.
(rust_val_print) <TYPE_CODE_UNION>: Remove enum code.
<TYPE_CODE_STRUCT>: Call rust_print_enum when appropriate.
(rust_print_struct_def): Add "for_rust_enum" parameter. Handle
enums.
(rust_internal_print_type): New function, from rust_print_type.
Remove enum code.
(rust_print_type): Call rust_internal_print_type.
(rust_evaluate_subexp) <STRUCTOP_ANONYMOUS, STRUCTOP_STRUCT>:
Update enum handling.
* dwarf2read.c (struct dwarf2_cu) <rust_unions>: New field.
(rust_fully_qualify, alloc_discriminant_info, quirk_rust_enum)
(rust_union_quirks): New functions.
(process_full_comp_unit, process_full_type_unit): Call
rust_union_quirks.
(process_structure_scope): Update rust_unions if necessary.
2018-02-26 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Accept more possible results in enum test.
gdb:
2018-02-26 Yao Qi <yao.qi@linaro.org>
* dwarf2read.c (struct partial_die_info) <read>: New method.
(read_partial_die): Remove the declaration.
(load_partial_dies): Update.
(partial_die_info::partial_die_info):
(read_partial_die): Change it to partial_die_info::read.
fixup_partial_die can be a partial_die_info method fixup.
gdb:
2018-02-26 Yao Qi <yao.qi@linaro.org>
* dwarf2read.c (struct partial_die_info) <fixup>: New method.
(fixup_partial_die): Remove declaration.
(scan_partial_symbols): Update.
(partial_die_parent_scope): Likewise.
(partial_die_full_name): Likewise.
(fixup_partial_die): Change it to partial_die_info::fixup.
This patch is to class-fy partial_die_info. Two things special here,
- disable assignment operator, but keep copy ctor, which is used in
load_partial_dies,
- have a private ctor which is only used by dwarf2_cu::find_partial_die,
I don't want other code use it, so make it private,
gdb:
2018-02-26 Yao Qi <yao.qi@linaro.org>
* dwarf2read.c (struct partial_die_info): Add ctor, delete
assignment operator.
(load_partial_dies): Use ctor and copy ctor.
(read_partial_die): Update.
(dwarf2_cu::find_partial_die): Use ctor.
This patch changes find_partial_die_in_comp_unit to a dwarf2_cu method
find_partial_die.
gdb:
2018-02-26 Yao Qi <yao.qi@linaro.org>
* dwarf2read.c (struct dwarf2_cu) <find_partial_die>: New method.
(find_partial_die_in_comp_unit): Change it to
dwarf2_cu::find_partial_die.
(find_partial_die): Update.
'abbrev' won't be NULL, so don't check it.
gdb:
2018-02-26 Yao Qi <yao.qi@linaro.org>
* dwarf2read.c (read_partial_die): Remove the code checking abbrev
is NULL.
load_partial_dies has a "while (1)" loop to visit each die, and create
partial_die_info if needed in each iteration, like this,
part_die = XOBNEW (&cu->comp_unit_obstack, struct partial_die_info);
while (1)
{
if (foo1) continue;
if (foo2) continue;
read_partial_die (, , part_die, ,);
....
part_die = XOBNEW (&cu->comp_unit_obstack, struct partial_die_info);
};
the code was written in a way that spaces are allocated on necessary on
cu->comp_unit_obstack. I want to class-fy partial_die_info, but
partial_die_info ctor can't follow XOBNEW immediately, so this patch
rewrite this loop to:
while (1)
{
if (foo1) continue;
if (foo2) continue;
struct partial_die_info pdi;
read_partial_die (, , &pdi, ,);
part_die = XOBNEW (&cu->comp_unit_obstack, struct partial_die_info);
memcpy (part_die, &pdi, sizeof (pdi));
};
we create a local variable pdi, if we need it, call XOBNEW, and copy.
This also reduce one XOBNEW call. I measured the number of XOBNEW call in
load_partial_dies when gdb reads dwarf2read.o, without this patch, it is
18827, and with this patch, it is 18826.
gdb:
2018-026-26 Yao Qi <yao.qi@linaro.org>
* dwarf2read.c (load_partial_dies): Move the location of XOBNEW.
Does anybody have an opinion about this? It would be nice to unbreak
the "default" build with clang (i.e. without passing special -Wno-error=
flags).
Here's a version rebased on today's master.
From 47d28075117fa2ddb93584ec50881e33777a85e5 Mon Sep 17 00:00:00 2001
From: Simon Marchi <simon.marchi@ericsson.com>
Date: Sat, 30 Dec 2017 22:48:18 -0500
Subject: [PATCH] dwarf: Make sect_offset 64-bits
Compiling with Clang 6 shows these errors:
/home/emaisin/src/binutils-gdb/gdb/dwarf2read.c:26610:43: error: result of comparison of constant 4294967296 with expression of type 'typename std::underlying_type<sect_offset>::type' (a
ka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (to_underlying (per_cu.sect_off) >= (static_cast<uint64_t> (1) << 32))
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/emaisin/src/binutils-gdb/gdb/dwarf2read.c:26618:43: error: result of comparison of constant 4294967296 with expression of type 'typename std::underlying_type<sect_offset>::type' (a
ka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (to_underlying (per_cu.sect_off) >= (static_cast<uint64_t> (1) << 32))
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The code in question checks if there is any offset exceeding 32 bits,
and therefore if we need to use the 64-bit DWARF format when writing the
.debug_names section. The type we use currently to represent section
offsets is an unsigned int (32-bits), which means a value of this type
will never exceed 32 bits, hence the errors above.
There are many signs that we want to support 64-bits DWARF (although I
haven't tested), such as:
- We correctly read initial length fields (read_initial_length)
- We take that into account when reading offsets (read_offset_1)
- The check_dwarf64_offsets function
However, I don't see how it can work if sect_offset is a 32-bits type.
Every time we record a section offset, we risk truncating the value.
And if a file uses the 64-bit DWARF format, it's most likely because
there are such offset values that overflow 32 bits.
Because of this, I think the way forward is to change sect_offset to be
a uint64_t. It will be able to represent any offset, regardless of the
bitness of the DWARF info.
This patch was regtested on the buildbot.
gdb/ChangeLog:
* gdbtypes.h (sect_offset): Change type to uint64_t.
(sect_offset_str): New function.
* dwarf2read.c (create_addrmap_from_aranges): Use
sect_offset_str.
(error_check_comp_unit_head): Likewise.
(create_debug_type_hash_table): Likewise.
(read_cutu_die_from_dwo): Likewise.
(init_cutu_and_read_dies): Likewise.
(init_cutu_and_read_dies_no_follow): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(partial_die_parent_scope): Likewise.
(peek_die_abbrev): Likewise.
(process_queue): Likewise.
(dwarf2_physname): Likewise.
(read_namespace_alias): Likewise.
(read_import_statement): Likewise.
(create_dwo_cu_reader): Likewise.
(create_cus_hash_table): Likewise.
(lookup_dwo_cutu): Likewise.
(inherit_abstract_dies): Likewise.
(read_func_scope): Likewise.
(read_call_site_scope): Likewise.
(dwarf2_add_member_fn): Likewise.
(read_common_block): Likewise.
(read_module_type): Likewise.
(read_typedef): Likewise.
(read_subrange_type): Likewise.
(load_partial_dies): Likewise.
(read_partial_die): Likewise.
(find_partial_die): Likewise.
(read_str_index): Likewise.
(dwarf2_string_attr): Likewise.
(build_error_marker_type): Likewise.
(lookup_die_type): Likewise.
(dump_die_shallow): Likewise.
(follow_die_ref): Likewise.
(dwarf2_fetch_die_loc_sect_off): Likewise.
(dwarf2_fetch_constant_bytes): Likewise.
(follow_die_sig): Likewise.
(get_signatured_type): Likewise.
(get_DW_AT_signature_type): Likewise.
(dwarf2_find_containing_comp_unit): Likewise.
(set_die_type): Likewise.
Tom Tromey
Omair Javaid
Simon Marchi
Simon Marchi
Joel Brobecker
Keith Seitz
Sergio Durigan Junior
Yao Qi