The sole caller of exit_inferior_num_silent was getting the inferior's
number to then use the number to look up the inferior again. I think
it's better to simply not have exit_inferior_num_silent; any potential
callers that only have the inferior's number should probably be
converted to pass the inferior itself around instead.
Tested by the buildbot.
gdb/ChangeLog
2018-07-03 Tom Tromey <tom@tromey.com>
* infrun.c (follow_exec): Use exit_inferior_silent.
* inferior.c (exit_inferior_num_silent): Remove.
* inferior.h (exit_inferior_num_silent): Don't declare.
In my multi-target work, I need to add a few more
scoped_restore_current_thread and switch_to_thread calls in some
places, and in some lower-level places I was fighting against the fact
that switch_to_thread reads/refreshes the stop_pc global.
Instead of piling on workarounds, let's just finally eliminate the
stop_pc global. We already have the per-thread
thread_info->suspend.stop_pc field, so it's mainly a matter of using
that more/instead.
gdb/ChangeLog:
2018-06-28 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_suspend_state) <stop_pc>: Extend
comments.
(switch_to_thread_no_regs): Adjust comment.
* infcmd.c (stop_pc): Delete.
(post_create_inferior, info_program_command): Replace references
to stop_pc with references to thread_info->suspend.stop_pc.
* inferior.h (stop_pc): Delete declaration.
* infrun.c (proceed, handle_syscall_event, fill_in_stop_func)
(handle_inferior_event_1, handle_signal_stop)
(process_event_stop_test, keep_going_stepped_thread)
(handle_step_into_function, handle_step_into_function_backward)
(print_stop_location): Replace references to stop_pc with
references to thread_info->suspend.stop_pc.
(struct infcall_suspend_state) <stop_pc>: Delete field.
(save_infcall_suspend_state, restore_infcall_suspend_state):
Remove references to inf_stat->stop_pc.
* linux-fork.c (fork_load_infrun_state): Likewise.
* record-btrace.c (record_btrace_set_replay): Likewise.
* record-full.c (record_full_goto_entry): Likewise.
* remote.c (print_one_stopped_thread): Likewise.
* target.c (target_resume): Extend comment.
* thread.c (set_executing_thread): New.
(set_executing): Use it.
(switch_to_thread_no_regs, switch_to_no_thread, switch_to_thread):
Remove references to stop_pc.
After commit 00431a78b2 ("Use thread_info and inferior pointers more
throughout"), following an exec can result in gdb crashing. On some
systems, this is visible with gdb.multi/multi-arch-exec.exp and
gdb.base/foll-exec-mode.exp. E.g.:
$ make check TESTS="gdb.multi/multi-arch-exec.exp gdb.base/foll-exec-mode.exp"
[snip]
FAIL: gdb.multi/multi-arch-exec.exp: first_arch=1: selected_thread=1: follow_exec_mode=new: continue across exec that changes architecture (GDB internal error)
ERROR: : spawn id exp10 not open
while executing
Running multi-arch-exec under Valgrind we easily spot the problem:
process 16305 is executing new program: ..../gdb.multi/multi-arch-exec/1-multi-arch-exec-hello
[New inferior 2 (process 0)]
[New process 16305]
==16129== Invalid read of size 8
==16129== at 0x7FA14D: get_thread_regcache(thread_info*) (regcache.c:399)
==16129== by 0x75E54B: handle_inferior_event_1(execution_control_state*) (infrun.c:5292)
==16129== by 0x75E82D: handle_inferior_event(execution_control_state*) (infrun.c:5382)
==16129== by 0x75BC6A: fetch_inferior_event(void*) (infrun.c:3918)
==16129== by 0x748DA3: inferior_event_handler(inferior_event_type, void*) (inf-loop.c:43)
==16129== by 0x464B5D: handle_target_event(int, void*) (linux-nat.c:4359)
==16129== by 0x7047E0: handle_file_event(file_handler*, int) (event-loop.c:733)
==16129== by 0x704D83: gdb_wait_for_event(int) (event-loop.c:859)
==16129== by 0x703BF6: gdb_do_one_event() (event-loop.c:322)
==16129== by 0x703CA2: start_event_loop() (event-loop.c:371)
==16129== by 0x791D95: captured_command_loop() (main.c:330)
==16129== by 0x79311C: captured_main(void*) (main.c:1157)
==16129== Address 0x15a5bad0 is 32 bytes inside a block of size 600 free'd
==16129== at 0x4C2E1E8: operator delete(void*) (vg_replace_malloc.c:576)
==16129== by 0x8A15D0: delete_thread_1(thread_info*, bool) (thread.c:465)
==16129== by 0x8A15FA: delete_thread(thread_info*) (thread.c:476)
==16129== by 0x8A0D43: add_thread_silent(ptid_t) (thread.c:291)
==16129== by 0x8A0DF0: add_thread_with_info(ptid_t, private_thread_info*) (thread.c:317)
==16129== by 0x8A0E79: add_thread(ptid_t) (thread.c:331)
==16129== by 0x75764C: follow_exec(ptid_t, char*) (infrun.c:1233)
==16129== by 0x75E534: handle_inferior_event_1(execution_control_state*) (infrun.c:5290)
==16129== by 0x75E82D: handle_inferior_event(execution_control_state*) (infrun.c:5382)
==16129== by 0x75BC6A: fetch_inferior_event(void*) (infrun.c:3918)
==16129== by 0x748DA3: inferior_event_handler(inferior_event_type, void*) (inf-loop.c:43)
==16129== by 0x464B5D: handle_target_event(int, void*) (linux-nat.c:4359)
The problem is that handle_inferior_event_1 is reading the stop_pc off
of a thread that was deleted by follow_exec. Before commit
00431a78b2, we didn't crash because we were passing down a ptid to
get_thread_regcache instead of ecs->event_thread.
Fix this by simply moving the stop_pc reading until after
ecs->event_thread is refreshed.
gdb/ChangeLog:
2018-06-28 Pedro Alves <palves@redhat.com>
* infrun.c (handle_inferior_event_1) <TARGET_WAITKIND_EXECD>:
Moving fetching stop_pc until after ecs->event_thread is refreshed.
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
When making an inferior call, and non-stop mode is off, then, once the
inferior call is complete all threads will be stopped, and we should
run the INF_EXEC_COMPLETE handler. This will result in a call to
'target_async(0)' to remove the event handlers for the target.
This was discussed by Yao Qi in this mailing list thread:
https://sourceware.org/ml/gdb/2017-10/msg00032.html
Without this then the target event handlers are left in place even
when the target is stopped, which is different to what happens during
a standard stop proceedure (for example when one thread hits a
breakpoint).
gdb/ChangeLog:
PR gdb/22882
* infrun.c (fetch_inferior_event): If GDB is not proceeding then
run INF_EXEC_COMPLETE handler, even when not calling normal_stop.
Move should_notify_stop local into more inner scope.
In PR22882 inferior functions are called on different threads while
scheduler-locking is turned on. This results in a hang. This was
discussed in this mailing list thread:
https://sourceware.org/ml/gdb/2017-10/msg00032.html
The problem is that when the thread is set running in order to execute
the inferior call, a call to target_async is made. If the target is
not already registered as 'target_async' then this will install the
async event handler, AND unconditionally mark the handler as having an
event pending.
However, if the target is already registered as target_async then the
event handler is not installed (its already installed) and the
handler is NOT marked as having an event pending.
If we try to set running a thread that already has a pending event,
then we do want to set target_async, however, there will not be an
external event incoming (the thread is already stopped) so we rely on
manually marking the event handler as having a pending event in order
to see the threads pending stop event. This is fine, if, at the point
where we call target_async, the target is not already marked as async.
But, if it is, then the event handler will not be marked as ready, and
the threads pending stop event will never be processed.
A similar pattern of code can be seen in linux_nat_target::resume,
where, when a thread has a pending event, the call to target_async is
followed by a call to async_file_mark to ensure that the pending
thread event will be processed, even if target_async was already set.
gdb/ChangeLog:
PR gdb/22882
* infrun.c (resume_1): Add call to mark_async_event_handler.
gdb/testsuite/ChangeLog:
* gdb.threads/multiple-successive-infcall.exp: Remove kfail case,
rewrite test to describe action performed, rather than possible
failure.
Run the test gdb.threads/multiple-successive-infcall.exp by hand, if
you turn on 'debug infrun 1', you'll see that the debug line fixed in
this commit is printed and contains the wrong $pc value. Fixed in
this commit.
gdb/ChangeLog:
* infrun.c (do_target_wait): Change old version of $pc printed.
The recent C++ification of target_ops replaced references to the old
"current_target" squashed target throughout with references to a
"target_stack" pointer. I had picked the "target_stack" name very
early in the multi-target work, and managed to stick with it, even
though it's a bit of a misnomer, since it isn't really a "target
stack" object, but a pointer into the current top target in the stack.
As I'm splitting more pieces off of the multi-target branch, I've come
to think that it's better to rename it now. A following patch will
introduce a new class to represent a target stack, and "target_stack"
would be _its_ ideal name. (In the branch, the class is called
a_target_stack to work around the clash.)
Thus this commit renames target_stack to current_top_target and
replaces all references throughout. Also, while at it,
current_top_target is made a function instead of a pointer, to make it
possible to change its internal implementation without leaking
implementation details out. In a couple patches, the implementation
of the function will change to refer to a target stack object, and
then further down the multi-target work, it'll change again to find
the right target stack for the current inferior.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_stack): Delete.
(current_top_target): Declare function.
* target.c (target_stack): Delete.
(g_current_top_target): New.
(current_top_target): New function.
* auxv.c: Use current_top_target instead of target_stack
throughout.
* avr-tdep.c: Likewise.
* breakpoint.c: Likewise.
* corefile.c: Likewise.
* elfread.c: Likewise.
* eval.c: Likewise.
* exceptions.c: Likewise.
* frame.c: Likewise.
* gdbarch-selftests.c: Likewise.
* gnu-v3-abi.c: Likewise.
* ia64-tdep.c: Likewise.
* ia64-vms-tdep.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* linespec.c: Likewise.
* linux-tdep.c: Likewise.
* minsyms.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-linux-tdep.c: Likewise.
* procfs.c: Likewise.
* regcache.c: Likewise.
* remote.c: Likewise.
* rs6000-tdep.c: Likewise.
* s390-linux-nat.c: Likewise.
* s390-tdep.c: Likewise.
* solib-aix.c: Likewise.
* solib-darwin.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* solib-target.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* spu-tdep.c: Likewise.
* symfile.c: Likewise.
* symtab.c: Likewise.
* target-descriptions.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* target.h: Likewise.
* tracefile-tfile.c: Likewise.
* tracepoint.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* windows-tdep.c: Likewise.
* mi/mi-main.c: Likewise.
This patch essentially causes GDB to treat inlined frames like "normal"
frames from the user's perspective. This means, for example, that when a
user sets a breakpoint in an inlined function, GDB will now actually stop
"in" that function.
Using the test case from breakpoints/17534,
3 static inline void NVIC_EnableIRQ(int IRQn)
4 {
5 volatile int y;
6 y = IRQn;
7 }
8
9 __attribute__( ( always_inline ) ) static inline void __WFI(void)
10 {
11 __asm volatile ("nop");
12 }
13
14 int main(void) {
15
16 x= 42;
17
18 if (x)
19 NVIC_EnableIRQ(16);
20 else
21 NVIC_EnableIRQ(18);
(gdb) b NVIC_EnableIRQ
Breakpoint 1 at 0x4003e4: NVIC_EnableIRQ. (2 locations)
(gdb) r
Starting program: 17534
Breakpoint 1, main () at 17534.c:19
19 NVIC_EnableIRQ(16);
Because skip_inline_frames currently skips every inlined frame, GDB "stops"
in the caller. This patch adds a new parameter to skip_inline_frames
that allows us to pass in a bpstat stop chain. The breakpoint locations
on the stop chain can be used to determine if we've stopped inside an inline
function (due to a user breakpoint). If we have, we do not elide the frame.
With this patch, GDB now reports that the inferior has stopped inside the
inlined function:
(gdb) r
Starting program: 17534
Breakpoint 1, NVIC_EnableIRQ (IRQn=16) at 17534.c:6
6 y = IRQn;
Many thanks to Jan and Pedro for guidance on this.
gdb/ChangeLog:
* breakpoint.c (build_bpstat_chain): New function, moved from
bpstat_stop_status.
(bpstat_stop_status): Add optional parameter, `stop_chain'.
If no stop chain is passed, call build_bpstat_chain to build it.
* breakpoint.h (build_bpstat_chain): Declare.
(bpstat_stop_status): Move documentation here from breakpoint.c.
* infrun.c (handle_signal_stop): Before eliding inlined frames,
build the stop chain and pass it to skip_inline_frames.
Pass this stop chain to bpstat_stop_status.
* inline-frame.c: Include breakpoint.h.
(stopped_by_user_bp_inline_frame): New function.
(skip_inline_frames): Add parameter `stop_chain'.
Move documention to inline-frame.h.
If non-NULL, use stopped_by_user_bp_inline_frame to determine
whether the frame should be elided.
* inline-frame.h (skip_inline_frames): Add parameter `stop_chain'.
Add moved documentation and update for new parameter.
gdb/testsuite/ChangeLog:
* gdb.ada/bp_inlined_func.exp: Update inlined frame locations
in expected breakpoint stop locations.
* gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to
move to proper scope to test variable values.
* gdb.opt/inline-break.c (inline_func1, not_inline_func1)
(inline_func2, not_inline_func2, inline_func3, not_inline_func3):
New functions.
(main): Call not_inline_func3.
* gdb.opt/inline-break.exp: Start inferior and set breakpoints at
inline_func1, inline_func2, and inline_func3. Test that when each
breakpoint is hit, GDB properly reports both the stop location
and the backtrace. Repeat tests for temporary breakpoints.
I.e., use C++ virtual methods and inheritance instead of tables of
function pointers.
Unfortunately, there's no way to do a smooth transition. ALL native
targets in the tree must be converted at the same time. I've tested
all I could with cross compilers and with help from GCC compile farm,
but naturally I haven't been able to test many of the ports. Still, I
made a best effort to port everything over, and while I expect some
build problems due to typos and such, which should be trivial to fix,
I don't expect any design problems.
* Implementation notes:
- The flattened current_target is gone. References to current_target
or current_target.beneath are replaced with references to
target_stack (the top of the stack) directly.
- To keep "set debug target" working, this adds a new debug_stratum
layer that sits on top of the stack, prints the debug, and delegates
to the target beneath.
In addition, this makes the shortname and longname properties of
target_ops be virtual methods instead of data fields, and makes the
debug target defer those to the target beneath. This is so that
debug code sprinkled around that does "if (debugtarget) ..." can
transparently print the name of the target beneath.
A patch later in the series actually splits out the
shortname/longname methods to a separate structure, but I preferred
to keep that chance separate as it is associated with changing a bit
the design of how targets are registered and open.
- Since you can't check whether a C++ virtual method is overridden,
the old method of checking whether a target_ops implements a method
by comparing the function pointer must be replaced with something
else.
Some cases are fixed by adding a parallel "can_do_foo" target_ops
methods. E.g.,:
+ for (t = target_stack; t != NULL; t = t->beneath)
{
- if (t->to_create_inferior != NULL)
+ if (t->can_create_inferior ())
break;
}
Others are fixed by changing void return type to bool or int return
type, and have the default implementation return false or -1, to
indicate lack of support.
- make-target-delegates was adjusted to generate C++ classes and
methods.
It needed tweaks to grok "virtual" in front of the target method
name, and for the fact that methods are no longer function pointers.
(In particular, the current code parsing the return type was simple
because it could simply parse up until the '(' in '(*to_foo)'.
It now generates a couple C++ classes that inherit target_ops:
dummy_target and debug_target.
Since we need to generate the class declarations as well, i.e., we
need to emit methods twice, we now generate the code in two passes.
- The core_target global is renamed to avoid conflict with the
"core_target" class.
- ctf/tfile targets
init_tracefile_ops is replaced by a base class that is inherited by
both ctf and tfile.
- bsd-uthread
The bsd_uthread_ops_hack hack is gone. It's not needed because
nothing was extending a target created by bsd_uthread_target.
- remote/extended-remote targets
This is a first pass, just enough to C++ify target_ops.
A later pass will convert more free functions to methods, and make
remote_state be truly per remote instance, allowing multiple
simultaneous instances of remote targets.
- inf-child/"native" is converted to an actual base class
(inf_child_target), that is inherited by all native targets.
- GNU/Linux
The old weird double-target linux_ops mechanism in linux-nat.c, is
gone, replaced by adding a few virtual methods to linux-nat.h's
target_ops, called low_XXX, that the concrete linux-nat
implementations override. Sort of like gdbserver's
linux_target_ops, but simpler, for requiring only one
target_ops-like hierarchy, which spares implementing the same method
twice when we need to forward the method to a low implementation.
The low target simply reimplements the target_ops method directly in
that case.
There are a few remaining linux-nat.c hooks that would be better
converted to low_ methods like above too. E.g.:
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
linux_nat_set_forget_process
That'll be done in a follow up patch.
- We can no longer use functions like x86_use_watchpoints to install
custom methods on an arbitrary base target.
The patch replaces instances of such a pattern with template mixins.
For example memory_breakpoint_target defined in target.h, or
x86_nat_target in x86-nat.h.
- linux_trad_target, MIPS and Alpha GNU/Linux
The code in the new linux-nat-trad.h/c files which was split off of
inf-ptrace.h/c recently, is converted to a C++ base class, and used
by the MIPS and Alpha GNU/Linux ports.
- BSD targets
The
$architecture x NetBSD/OpenBSD/FreeBSD
support matrix complicates things a bit. There's common BSD target
code, and there's common architecture-specific code shared between
the different BSDs. Currently, all that is stiched together to form
a final target, via the i386bsd_target, x86bsd_target,
fbsd_nat_add_target functions etc.
This introduces new fbsd_nat_target, obsd_nat_target and
nbsd_nat_target classes that serve as base/prototype target for the
corresponding BSD variant.
And introduces generic i386/AMD64 BSD targets, to be used as
template mixin to build a final target. Similarly, a generic SPARC
target is added, used by both BSD and Linux ports.
- bsd_kvm_add_target, BSD libkvm target
I considered making bsd_kvm_supply_pcb a virtual method, and then
have each port inherit bsd_kvm_target and override that method, but
that was resulting in lots of unjustified churn, so I left the
function pointer mechanism alone.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@freebsd.org>
* target.h (enum strata) <debug_stratum>: New.
(struct target_ops) <all delegation methods>: Replace by C++
virtual methods, and drop "to_" prefix. All references updated
throughout.
<to_shortname, to_longname, to_doc, to_data,
to_have_steppable_watchpoint, to_have_continuable_watchpoint,
to_has_thread_control, to_attach_no_wait>: Delete, replaced by
virtual methods. All references updated throughout.
<can_attach, supports_terminal_ours, can_create_inferior,
get_thread_control_capabilities, attach_no_wait>: New
virtual methods.
<insert_breakpoint, remove_breakpoint>: Now
TARGET_DEFAULT_NORETURN methods.
<info_proc>: Now returns bool.
<to_magic>: Delete.
(OPS_MAGIC): Delete.
(current_target): Delete. All references replaced by references
to ...
(target_stack): ... this. New.
(target_shortname, target_longname): Adjust.
(target_can_run): Now a function declaration.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(memory_breakpoint_target): New template class.
(test_target_ops): Refactor as a C++ class with virtual methods.
* make-target-delegates (NAME_PART): Tighten.
(POINTER_PART, CP_SYMBOL): New.
(SIMPLE_RETURN_PART): Reimplement.
(VEC_RETURN_PART): Expect less.
(RETURN_PART, VIRTUAL_PART): New.
(METHOD): Adjust to C++ virtual methods.
(scan_target_h): Remove reference to C99.
(dname): Output "target_ops::" prefix.
(write_function_header): Adjust to output a C++ class method.
(write_declaration): New.
(write_delegator): Adjust to output a C++ class method.
(tdname): Output "dummy_target::" prefix.
(write_tdefault, write_debugmethod): Adjust to output a C++ class
method.
(tdefault_names, debug_names): Delete.
(return_types, tdefaults, styles, argtypes_array): New.
(top level): All methods are delegators.
(print_class): New.
(top level): Print dummy_target and debug_target classes.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_info_proc_what)
(target_debug_print_thread_control_capabilities)
(target_debug_print_thread_info_p): New.
* target.c (dummy_target): Delete.
(the_dummy_target, the_debug_target): New.
(target_stack): Now extern.
(set_targetdebug): Push/unpush debug target.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Remove target_ops parameter.
(complete_target_initialization): Delete.
(add_target_with_completer): No longer call
complete_target_initialization.
(target_supports_terminal_ours): Use regular delegation.
(update_current_target): Delete.
(push_target): No longer check magic number. Don't call
update_current_target.
(unpush_target): Don't call update_current_target.
(target_is_pushed): No longer check magic number.
(target_require_runnable): Skip for all stratums over
process_stratum.
(target_ops::info_proc): New.
(target_info_proc): Use find_target_at and
find_default_run_target.
(target_supports_disable_randomization): Use regular delegation.
(target_get_osdata): Use find_target_at.
(target_ops::open, target_ops::close, target_ops::can_attach)
(target_ops::attach, target_ops::can_create_inferior)
(target_ops::create_inferior, target_ops::can_run)
(target_can_run): New.
(default_fileio_target): Use regular delegation.
(target_ops::fileio_open, target_ops::fileio_pwrite)
(target_ops::fileio_pread, target_ops::fileio_fstat)
(target_ops::fileio_close, target_ops::fileio_unlink)
(target_ops::fileio_readlink): New.
(target_fileio_open_1, target_fileio_unlink)
(target_fileio_readlink): Always call the target method. Handle
FILEIO_ENOSYS.
(return_zero, return_zero_has_execution): Delete.
(init_dummy_target): Delete.
(dummy_target::dummy_target, dummy_target::shortname)
(dummy_target::longname, dummy_target::doc)
(debug_target::debug_target, debug_target::shortname)
(debug_target::longname, debug_target::doc): New.
(target_supports_delete_record): Use regular delegation.
(setup_target_debug): Delete.
(maintenance_print_target_stack): Skip debug_stratum.
(initialize_targets): Instantiate the_dummy_target and
the_debug_target.
* auxv.c (target_auxv_parse): Remove 'ops' parameter. Adjust to
use target_stack.
(target_auxv_search, fprint_target_auxv): Adjust.
(info_auxv_command): Adjust to use target_stack.
* auxv.h (target_auxv_parse): Remove 'ops' parameter.
* exceptions.c (print_flush): Handle a NULL target_stack.
* regcache.c (target_ops_no_register): Refactor as class with
virtual methods.
* exec.c (exec_target): New class.
(exec_ops): Now an exec_target.
(exec_open, exec_close_1, exec_get_section_table)
(exec_xfer_partial, exec_files_info, exec_has_memory)
(exec_make_note_section): Refactor as exec_target methods.
(exec_file_clear, ignore, exec_remove_breakpoint, init_exec_ops):
Delete.
(exec_target::find_memory_regions): New.
(_initialize_exec): Don't call init_exec_ops.
* gdbcore.h (exec_file_clear): Delete.
* corefile.c (core_target): Delete.
(core_file_command): Adjust.
* corelow.c (core_target): New class.
(the_core_target): New.
(core_close): Remove target_ops parameter.
(core_close_cleanup): Adjust.
(core_target::close): New.
(core_open, core_detach, get_core_registers, core_files_info)
(core_xfer_partial, core_thread_alive, core_read_description)
(core_pid_to_str, core_thread_name, core_has_memory)
(core_has_stack, core_has_registers, core_info_proc): Rework as
core_target methods.
(ignore, core_remove_breakpoint, init_core_ops): Delete.
(_initialize_corelow): Initialize the_core_target.
* gdbcore.h (core_target): Delete.
(the_core_target): New.
* ctf.c: (ctf_target): New class.
(ctf_ops): Now a ctf_target.
(ctf_open, ctf_close, ctf_files_info, ctf_fetch_registers)
(ctf_xfer_partial, ctf_get_trace_state_variable_value)
(ctf_trace_find, ctf_traceframe_info): Refactor as ctf_target
methods.
(init_ctf_ops): Delete.
(_initialize_ctf): Don't call it.
* tracefile-tfile.c (tfile_target): New class.
(tfile_ops): Now a tfile_target.
(tfile_open, tfile_close, tfile_files_info)
(tfile_get_tracepoint_status, tfile_trace_find)
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value, tfile_traceframe_info):
Refactor as tfile_target methods.
(tfile_xfer_partial_features): Remove target_ops parameter.
(init_tfile_ops): Delete.
(_initialize_tracefile_tfile): Don't call it.
* tracefile.c (tracefile_has_all_memory, tracefile_has_memory)
(tracefile_has_stack, tracefile_has_registers)
(tracefile_thread_alive, tracefile_get_trace_status): Refactor as
tracefile_target methods.
(init_tracefile_ops): Delete.
(tracefile_target::tracefile_target): New.
* tracefile.h: Include "target.h".
(tracefile_target): New class.
(init_tracefile_ops): Delete.
* spu-multiarch.c (spu_multiarch_target): New class.
(spu_ops): Now a spu_multiarch_target.
(spu_thread_architecture, spu_region_ok_for_hw_watchpoint)
(spu_fetch_registers, spu_store_registers, spu_xfer_partial)
(spu_search_memory, spu_mourn_inferior): Refactor as
spu_multiarch_target methods.
(init_spu_ops): Delete.
(_initialize_spu_multiarch): Remove references to init_spu_ops,
complete_target_initialization.
* ravenscar-thread.c (ravenscar_thread_target): New class.
(ravenscar_ops): Now a ravenscar_thread_target.
(ravenscar_resume, ravenscar_wait, ravenscar_update_thread_list)
(ravenscar_thread_alive, ravenscar_pid_to_str)
(ravenscar_fetch_registers, ravenscar_store_registers)
(ravenscar_prepare_to_store, ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint)
(ravenscar_stopped_by_watchpoint, ravenscar_stopped_data_address)
(ravenscar_mourn_inferior, ravenscar_core_of_thread)
(ravenscar_get_ada_task_ptid): Refactor as ravenscar_thread_target
methods.
(init_ravenscar_thread_ops): Delete.
(_initialize_ravenscar): Remove references to
init_ravenscar_thread_ops and complete_target_initialization.
* bsd-uthread.c (bsd_uthread_ops_hack): Delete.
(bsd_uthread_target): New class.
(bsd_uthread_ops): Now a bsd_uthread_target.
(bsd_uthread_activate): Adjust to refer to bsd_uthread_ops.
(bsd_uthread_close, bsd_uthread_mourn_inferior)
(bsd_uthread_fetch_registers, bsd_uthread_store_registers)
(bsd_uthread_wait, bsd_uthread_resume, bsd_uthread_thread_alive)
(bsd_uthread_update_thread_list, bsd_uthread_extra_thread_info)
(bsd_uthread_pid_to_str): Refactor as bsd_uthread_target methods.
(bsd_uthread_target): Delete function.
(_initialize_bsd_uthread): Remove reference to
complete_target_initialization.
* bfd-target.c (target_bfd_data): Delete. Fields folded into ...
(target_bfd): ... this new class.
(target_bfd_xfer_partial, target_bfd_get_section_table)
(target_bfd_close): Refactor as target_bfd methods.
(target_bfd::~target_bfd): New.
(target_bfd_reopen): Adjust.
(target_bfd::close): New.
* record-btrace.c (record_btrace_target): New class.
(record_btrace_ops): Now a record_btrace_target.
(record_btrace_open, record_btrace_stop_recording)
(record_btrace_disconnect, record_btrace_close)
(record_btrace_async, record_btrace_info)
(record_btrace_insn_history, record_btrace_insn_history_range)
(record_btrace_insn_history_from, record_btrace_call_history)
(record_btrace_call_history_range)
(record_btrace_call_history_from, record_btrace_record_method)
(record_btrace_is_replaying, record_btrace_will_replay)
(record_btrace_xfer_partial, record_btrace_insert_breakpoint)
(record_btrace_remove_breakpoint, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store)
(record_btrace_to_get_unwinder)
(record_btrace_to_get_tailcall_unwinder, record_btrace_resume)
(record_btrace_commit_resume, record_btrace_wait)
(record_btrace_stop, record_btrace_can_execute_reverse)
(record_btrace_stopped_by_sw_breakpoint)
(record_btrace_supports_stopped_by_sw_breakpoint)
(record_btrace_stopped_by_hw_breakpoint)
(record_btrace_supports_stopped_by_hw_breakpoint)
(record_btrace_update_thread_list, record_btrace_thread_alive)
(record_btrace_goto_begin, record_btrace_goto_end)
(record_btrace_goto, record_btrace_stop_replaying_all)
(record_btrace_execution_direction)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): Refactor as
record_btrace_target methods.
(init_record_btrace_ops): Delete.
(_initialize_record_btrace): Remove reference to
init_record_btrace_ops.
* record-full.c (RECORD_FULL_IS_REPLAY): Adjust to always refer to
the execution_direction global.
(record_full_base_target, record_full_target)
(record_full_core_target): New classes.
(record_full_ops): Now a record_full_target.
(record_full_core_ops): Now a record_full_core_target.
(record_full_target::detach, record_full_target::disconnect)
(record_full_core_target::disconnect)
(record_full_target::mourn_inferior, record_full_target::kill):
New.
(record_full_open, record_full_close, record_full_async): Refactor
as methods of the record_full_base_target class.
(record_full_resume, record_full_commit_resume): Refactor
as methods of the record_full_target class.
(record_full_wait, record_full_stopped_by_watchpoint)
(record_full_stopped_data_address)
(record_full_stopped_by_sw_breakpoint)
(record_full_supports_stopped_by_sw_breakpoint)
(record_full_stopped_by_hw_breakpoint)
(record_full_supports_stopped_by_hw_breakpoint): Refactor as
methods of the record_full_base_target class.
(record_full_store_registers, record_full_xfer_partial)
(record_full_insert_breakpoint, record_full_remove_breakpoint):
Refactor as methods of the record_full_target class.
(record_full_can_execute_reverse, record_full_get_bookmark)
(record_full_goto_bookmark, record_full_execution_direction)
(record_full_record_method, record_full_info, record_full_delete)
(record_full_is_replaying, record_full_will_replay)
(record_full_goto_begin, record_full_goto_end, record_full_goto)
(record_full_stop_replaying): Refactor as methods of the
record_full_base_target class.
(record_full_core_resume, record_full_core_kill)
(record_full_core_fetch_registers)
(record_full_core_prepare_to_store)
(record_full_core_store_registers, record_full_core_xfer_partial)
(record_full_core_insert_breakpoint)
(record_full_core_remove_breakpoint)
(record_full_core_has_execution): Refactor
as methods of the record_full_core_target class.
(record_full_base_target::supports_delete_record): New.
(init_record_full_ops): Delete.
(init_record_full_core_ops): Delete.
(record_full_save): Refactor as method of the
record_full_base_target class.
(_initialize_record_full): Remove references to
init_record_full_ops and init_record_full_core_ops.
* remote.c (remote_target, extended_remote_target): New classes.
(remote_ops): Now a remote_target.
(extended_remote_ops): Now an extended_remote_target.
(remote_insert_fork_catchpoint, remote_remove_fork_catchpoint)
(remote_insert_vfork_catchpoint, remote_remove_vfork_catchpoint)
(remote_insert_exec_catchpoint, remote_remove_exec_catchpoint)
(remote_pass_signals, remote_set_syscall_catchpoint)
(remote_program_signals, )
(remote_thread_always_alive): Remove target_ops parameter.
(remote_thread_alive, remote_thread_name)
(remote_update_thread_list, remote_threads_extra_info)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(remote_get_ada_task_ptid, remote_close, remote_start_remote)
(remote_open): Refactor as methods of remote_target.
(extended_remote_open, extended_remote_detach)
(extended_remote_attach, extended_remote_post_attach):
(extended_remote_supports_disable_randomization)
(extended_remote_create_inferior): : Refactor as method of
extended_remote_target.
(remote_set_permissions, remote_open_1, remote_detach)
(remote_follow_fork, remote_follow_exec, remote_disconnect)
(remote_resume, remote_commit_resume, remote_stop)
(remote_interrupt, remote_pass_ctrlc, remote_terminal_inferior)
(remote_terminal_ours, remote_wait, remote_fetch_registers)
(remote_prepare_to_store, remote_store_registers)
(remote_flash_erase, remote_flash_done, remote_files_info)
(remote_kill, remote_mourn, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_watchpoint_addr_within_range)
(remote_remove_watchpoint, remote_region_ok_for_hw_watchpoint)
(remote_check_watch_resources, remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint)
(remote_stopped_by_watchpoint, remote_stopped_data_address)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory): Refactor as methods of remote_target.
(remote_write_qxfer, remote_read_qxfer): Remove target_ops
parameter.
(remote_xfer_partial, remote_get_memory_xfer_limit)
(remote_search_memory, remote_rcmd, remote_memory_map)
(remote_pid_to_str, remote_get_thread_local_address)
(remote_get_tib_address, remote_read_description): Refactor as
methods of remote_target.
(remote_target::fileio_open, remote_target::fileio_pwrite)
(remote_target::fileio_pread, remote_target::fileio_close): New.
(remote_hostio_readlink, remote_hostio_fstat)
(remote_filesystem_is_local, remote_can_execute_reverse)
(remote_supports_non_stop, remote_supports_disable_randomization)
(remote_supports_multi_process, remote_supports_cond_breakpoints)
(remote_supports_enable_disable_tracepoint)
(remote_supports_string_tracing)
(remote_can_run_breakpoint_commands, remote_trace_init)
(remote_download_tracepoint, remote_can_download_tracepoint)
(remote_download_trace_state_variable, remote_enable_tracepoint)
(remote_disable_tracepoint, remote_trace_set_readonly_regions)
(remote_trace_start, remote_get_trace_status)
(remote_get_tracepoint_status, remote_trace_stop)
(remote_trace_find, remote_get_trace_state_variable_value)
(remote_save_trace_data, remote_get_raw_trace_data)
(remote_set_disconnected_tracing, remote_core_of_thread)
(remote_set_circular_trace_buffer, remote_traceframe_info)
(remote_get_min_fast_tracepoint_insn_len)
(remote_set_trace_buffer_size, remote_set_trace_notes)
(remote_use_agent, remote_can_use_agent, remote_enable_btrace)
(remote_disable_btrace, remote_teardown_btrace)
(remote_read_btrace, remote_btrace_conf)
(remote_augmented_libraries_svr4_read, remote_load)
(remote_pid_to_exec_file, remote_can_do_single_step)
(remote_execution_direction, remote_thread_handle_to_thread_info):
Refactor as methods of remote_target.
(init_remote_ops, init_extended_remote_ops): Delete.
(remote_can_async_p, remote_is_async_p, remote_async)
(remote_thread_events, remote_upload_tracepoints)
(remote_upload_trace_state_variables): Refactor as methods of
remote_target.
(_initialize_remote): Remove references to init_remote_ops and
init_extended_remote_ops.
* remote-sim.c (gdbsim_target): New class.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_kill)
(gdbsim_load, gdbsim_create_inferior, gdbsim_open, gdbsim_close)
(gdbsim_detach, gdbsim_resume, gdbsim_interrupt)
(gdbsim_wait, gdbsim_prepare_to_store, gdbsim_xfer_partial)
(gdbsim_files_info, gdbsim_mourn_inferior, gdbsim_thread_alive)
(gdbsim_pid_to_str, gdbsim_has_all_memory, gdbsim_has_memory):
Refactor as methods of gdbsim_target.
(gdbsim_ops): Now a gdbsim_target.
(init_gdbsim_ops): Delete.
(gdbsim_cntrl_c): Adjust.
(_initialize_remote_sim): Remove reference to init_gdbsim_ops.
* amd64-linux-nat.c (amd64_linux_nat_target): New class.
(the_amd64_linux_nat_target): New.
(amd64_linux_fetch_inferior_registers)
(amd64_linux_store_inferior_registers): Refactor as methods of
amd64_linux_nat_target.
(_initialize_amd64_linux_nat): Adjust. Set linux_target.
* i386-linux-nat.c: Don't include "linux-nat.h".
(i386_linux_nat_target): New class.
(the_i386_linux_nat_target): New.
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers, i386_linux_resume): Refactor
as methods of i386_linux_nat_target.
(_initialize_i386_linux_nat): Adjust. Set linux_target.
* inf-child.c (inf_child_ops): Delete.
(inf_child_fetch_inferior_registers)
(inf_child_store_inferior_registers): Delete.
(inf_child_post_attach, inf_child_prepare_to_store): Refactor as
methods of inf_child_target.
(inf_child_target::supports_terminal_ours)
(inf_child_target::terminal_init)
(inf_child_target::terminal_inferior)
(inf_child_target::terminal_ours_for_output)
(inf_child_target::terminal_ours, inf_child_target::interrupt)
(inf_child_target::pass_ctrlc, inf_child_target::terminal_info):
New.
(inf_child_open, inf_child_disconnect, inf_child_close)
(inf_child_mourn_inferior, inf_child_maybe_unpush_target)
(inf_child_post_startup_inferior, inf_child_can_run)
(inf_child_pid_to_exec_file): Refactor as methods of
inf_child_target.
(inf_child_follow_fork): Delete.
(inf_child_target::can_create_inferior)
(inf_child_target::can_attach): New.
(inf_child_target::has_all_memory, inf_child_target::has_memory)
(inf_child_target::has_stack, inf_child_target::has_registers)
(inf_child_target::has_execution): New.
(inf_child_fileio_open, inf_child_fileio_pwrite)
(inf_child_fileio_pread, inf_child_fileio_fstat)
(inf_child_fileio_close, inf_child_fileio_unlink)
(inf_child_fileio_readlink, inf_child_use_agent)
(inf_child_can_use_agent): Refactor as methods of
inf_child_target.
(return_zero, inf_child_target): Delete.
(inf_child_target::inf_child_target): New.
* inf-child.h: Include "target.h".
(inf_child_target): Delete function prototype.
(inf_child_target): New class.
(inf_child_open_target, inf_child_mourn_inferior)
(inf_child_maybe_unpush_target): Delete.
* inf-ptrace.c (inf_ptrace_target::~inf_ptrace_target): New.
(inf_ptrace_follow_fork, inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint, inf_ptrace_create_inferior)
(inf_ptrace_post_startup_inferior, inf_ptrace_mourn_inferior)
(inf_ptrace_attach, inf_ptrace_post_attach, inf_ptrace_detach)
(inf_ptrace_detach_success, inf_ptrace_kill, inf_ptrace_resume)
(inf_ptrace_wait, inf_ptrace_xfer_partial)
(inf_ptrace_thread_alive, inf_ptrace_files_info)
(inf_ptrace_pid_to_str, inf_ptrace_auxv_parse): Refactor as
methods of inf_ptrace_target.
(inf_ptrace_target): Delete function.
* inf-ptrace.h: Include "inf-child.h".
(inf_ptrace_target): Delete function declaration.
(inf_ptrace_target): New class.
(inf_ptrace_trad_target, inf_ptrace_detach_success): Delete.
* linux-nat.c (linux_target): New.
(linux_ops, linux_ops_saved, super_xfer_partial): Delete.
(linux_nat_target::~linux_nat_target): New.
(linux_child_post_attach, linux_child_post_startup_inferior)
(linux_child_follow_fork, linux_child_insert_fork_catchpoint)
(linux_child_remove_fork_catchpoint)
(linux_child_insert_vfork_catchpoint)
(linux_child_remove_vfork_catchpoint)
(linux_child_insert_exec_catchpoint)
(linux_child_remove_exec_catchpoint)
(linux_child_set_syscall_catchpoint, linux_nat_pass_signals)
(linux_nat_create_inferior, linux_nat_attach, linux_nat_detach)
(linux_nat_resume, linux_nat_stopped_by_watchpoint)
(linux_nat_stopped_data_address)
(linux_nat_stopped_by_sw_breakpoint)
(linux_nat_supports_stopped_by_sw_breakpoint)
(linux_nat_stopped_by_hw_breakpoint)
(linux_nat_supports_stopped_by_hw_breakpoint, linux_nat_wait)
(linux_nat_kill, linux_nat_mourn_inferior)
(linux_nat_xfer_partial, linux_nat_thread_alive)
(linux_nat_update_thread_list, linux_nat_pid_to_str)
(linux_nat_thread_name, linux_child_pid_to_exec_file)
(linux_child_static_tracepoint_markers_by_strid)
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_supports_non_stop, linux_nat_always_non_stop_p)
(linux_nat_supports_multi_process)
(linux_nat_supports_disable_randomization, linux_nat_async)
(linux_nat_stop, linux_nat_close, linux_nat_thread_address_space)
(linux_nat_core_of_thread, linux_nat_filesystem_is_local)
(linux_nat_fileio_open, linux_nat_fileio_readlink)
(linux_nat_fileio_unlink, linux_nat_thread_events): Refactor as
methods of linux_nat_target.
(linux_nat_wait_1, linux_xfer_siginfo, linux_proc_xfer_partial)
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Remove target_ops
parameter.
(check_stopped_by_watchpoint): Adjust.
(linux_xfer_partial): Delete.
(linux_target_install_ops, linux_target, linux_nat_add_target):
Delete.
(linux_nat_target::linux_nat_target): New.
* linux-nat.h: Include "inf-ptrace.h".
(linux_nat_target): New.
(linux_target, linux_target_install_ops, linux_nat_add_target):
Delete function declarations.
(linux_target): Declare global.
* linux-thread-db.c (thread_db_target): New.
(thread_db_target::thread_db_target): New.
(thread_db_ops): Delete.
(the_thread_db_target): New.
(thread_db_detach, thread_db_wait, thread_db_mourn_inferior)
(thread_db_update_thread_list, thread_db_pid_to_str)
(thread_db_extra_thread_info)
(thread_db_thread_handle_to_thread_info)
(thread_db_get_thread_local_address, thread_db_get_ada_task_ptid)
(thread_db_resume): Refactor as methods of thread_db_target.
(init_thread_db_ops): Delete.
(_initialize_thread_db): Remove reference to init_thread_db_ops.
* x86-linux-nat.c: Don't include "linux-nat.h".
(super_post_startup_inferior): Delete.
(x86_linux_nat_target::~x86_linux_nat_target): New.
(x86_linux_child_post_startup_inferior)
(x86_linux_read_description, x86_linux_enable_btrace)
(x86_linux_disable_btrace, x86_linux_teardown_btrace)
(x86_linux_read_btrace, x86_linux_btrace_conf): Refactor as
methods of x86_linux_nat_target.
(x86_linux_create_target): Delete. Bits folded ...
(x86_linux_add_target): ... here. Now takes a linux_nat_target
pointer.
* x86-linux-nat.h: Include "linux-nat.h" and "x86-nat.h".
(x86_linux_nat_target): New class.
(x86_linux_create_target): Delete.
(x86_linux_add_target): Now takes a linux_nat_target pointer.
* x86-nat.c (x86_insert_watchpoint, x86_remove_watchpoint)
(x86_region_ok_for_watchpoint, x86_stopped_data_address)
(x86_stopped_by_watchpoint, x86_insert_hw_breakpoint)
(x86_remove_hw_breakpoint, x86_can_use_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): Remove target_ops parameter and
make extern.
(x86_use_watchpoints): Delete.
* x86-nat.h: Include "breakpoint.h" and "target.h".
(x86_use_watchpoints): Delete.
(x86_can_use_hw_breakpoint, x86_region_ok_for_hw_watchpoint)
(x86_stopped_by_watchpoint, x86_stopped_data_address)
(x86_insert_watchpoint, x86_remove_watchpoint)
(x86_insert_hw_breakpoint, x86_remove_hw_breakpoint)
(x86_stopped_by_hw_breakpoint): New declarations.
(x86_nat_target): New template class.
* ppc-linux-nat.c (ppc_linux_nat_target): New class.
(the_ppc_linux_nat_target): New.
(ppc_linux_fetch_inferior_registers)
(ppc_linux_can_use_hw_breakpoint)
(ppc_linux_region_ok_for_hw_watchpoint)
(ppc_linux_ranged_break_num_registers)
(ppc_linux_insert_hw_breakpoint, ppc_linux_remove_hw_breakpoint)
(ppc_linux_insert_mask_watchpoint)
(ppc_linux_remove_mask_watchpoint)
(ppc_linux_can_accel_watchpoint_condition)
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint)
(ppc_linux_stopped_data_address, ppc_linux_stopped_by_watchpoint)
(ppc_linux_watchpoint_addr_within_range)
(ppc_linux_masked_watch_num_registers)
(ppc_linux_store_inferior_registers, ppc_linux_auxv_parse)
(ppc_linux_read_description): Refactor as methods of
ppc_linux_nat_target.
(_initialize_ppc_linux_nat): Adjust. Set linux_target.
* procfs.c (procfs_xfer_partial): Delete forward declaration.
(procfs_target): New class.
(the_procfs_target): New.
(procfs_target): Delete function.
(procfs_auxv_parse, procfs_attach, procfs_detach)
(procfs_fetch_registers, procfs_store_registers, procfs_wait)
(procfs_xfer_partial, procfs_resume, procfs_pass_signals)
(procfs_files_info, procfs_kill_inferior, procfs_mourn_inferior)
(procfs_create_inferior, procfs_update_thread_list)
(procfs_thread_alive, procfs_pid_to_str)
(procfs_can_use_hw_breakpoint, procfs_stopped_by_watchpoint)
(procfs_stopped_data_address, procfs_insert_watchpoint)
(procfs_remove_watchpoint, procfs_region_ok_for_hw_watchpoint)
(proc_find_memory_regions, procfs_info_proc)
(procfs_make_note_section): Refactor as methods of procfs_target.
(_initialize_procfs): Adjust.
* sol-thread.c (sol_thread_target): New class.
(sol_thread_ops): Now a sol_thread_target.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers)
(sol_thread_xfer_partial, sol_thread_mourn_inferior)
(sol_thread_alive, solaris_pid_to_str, sol_update_thread_list)
(sol_get_ada_task_ptid): Refactor as methods of sol_thread_target.
(init_sol_thread_ops): Delete.
(_initialize_sol_thread): Adjust. Remove references to
init_sol_thread_ops and complete_target_initialization.
* windows-nat.c (windows_nat_target): New class.
(windows_fetch_inferior_registers)
(windows_store_inferior_registers, windows_resume, windows_wait)
(windows_attach, windows_detach, windows_pid_to_exec_file)
(windows_files_info, windows_create_inferior)
(windows_mourn_inferior, windows_interrupt, windows_kill_inferior)
(windows_close, windows_pid_to_str, windows_xfer_partial)
(windows_get_tib_address, windows_get_ada_task_ptid)
(windows_thread_name, windows_thread_alive): Refactor as
windows_nat_target methods.
(do_initial_windows_stuff): Adjust.
(windows_target): Delete function.
(_initialize_windows_nat): Adjust.
* darwin-nat.c (darwin_resume, darwin_wait_to, darwin_interrupt)
(darwin_mourn_inferior, darwin_kill_inferior)
(darwin_create_inferior, darwin_attach, darwin_detach)
(darwin_pid_to_str, darwin_thread_alive, darwin_xfer_partial)
(darwin_pid_to_exec_file, darwin_get_ada_task_ptid)
(darwin_supports_multi_process): Refactor as darwin_nat_target
methods.
(darwin_resume_to, darwin_files_info): Delete.
(_initialize_darwin_inferior): Rename to ...
(_initialize_darwin_nat): ... this. Adjust to C++ification.
* darwin-nat.h: Include "inf-child.h".
(darwin_nat_target): New class.
(darwin_complete_target): Delete.
* i386-darwin-nat.c (i386_darwin_nat_target): New class.
(darwin_target): New.
(i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Refactor as methods of
darwin_nat_target.
(darwin_complete_target): Delete, with ...
(_initialize_i386_darwin_nat): ... bits factored out here.
* alpha-linux-nat.c (alpha_linux_nat_target): New class.
(the_alpha_linux_nat_target): New.
(alpha_linux_register_u_offset): Refactor as
alpha_linux_nat_target method.
(_initialize_alpha_linux_nat): Adjust.
* linux-nat-trad.c (inf_ptrace_register_u_offset): Delete.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers): Refact as
methods of linux_nat_trad_target.
(linux_trad_target): Delete.
* linux-nat-trad.h (linux_trad_target): Delete function.
(linux_nat_trad_target): New class.
* mips-linux-nat.c (mips_linux_nat_target): New class.
(super_fetch_registers, super_store_registers, super_close):
Delete.
(the_mips_linux_nat_target): New.
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers)
(mips64_linux_fetch_registers, mips64_linux_store_registers)
(mips_linux_register_u_offset, mips_linux_read_description)
(mips_linux_can_use_hw_breakpoint)
(mips_linux_stopped_by_watchpoint)
(mips_linux_stopped_data_address)
(mips_linux_region_ok_for_hw_watchpoint)
(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
(mips_linux_close): Refactor as methods of mips_linux_nat.
(_initialize_mips_linux_nat): Adjust to C++ification.
* aix-thread.c (aix_thread_target): New class.
(aix_thread_ops): Now an aix_thread_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers)
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str)
(aix_thread_extra_thread_info, aix_thread_get_ada_task_ptid):
Refactor as methods of aix_thread_target.
(init_aix_thread_ops): Delete.
(_initialize_aix_thread): Remove references to init_aix_thread_ops
and complete_target_initialization.
* rs6000-nat.c (rs6000_xfer_shared_libraries): Delete.
(rs6000_nat_target): New class.
(the_rs6000_nat_target): New.
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers)
(rs6000_xfer_partial, rs6000_wait, rs6000_create_inferior)
(rs6000_xfer_shared_libraries): Refactor as rs6000_nat_target methods.
(super_create_inferior): Delete.
(_initialize_rs6000_nat): Adjust to C++ification.
* arm-linux-nat.c (arm_linux_nat_target): New class.
(the_arm_linux_nat_target): New.
(arm_linux_fetch_inferior_registers)
(arm_linux_store_inferior_registers, arm_linux_read_description)
(arm_linux_can_use_hw_breakpoint, arm_linux_insert_hw_breakpoint)
(arm_linux_remove_hw_breakpoint)
(arm_linux_region_ok_for_hw_watchpoint)
(arm_linux_insert_watchpoint, arm_linux_remove_watchpoint)
(arm_linux_stopped_data_address, arm_linux_stopped_by_watchpoint)
(arm_linux_watchpoint_addr_within_range): Refactor as methods of
arm_linux_nat_target.
(_initialize_arm_linux_nat): Adjust to C++ification.
* aarch64-linux-nat.c (aarch64_linux_nat_target): New class.
(the_aarch64_linux_nat_target): New.
(aarch64_linux_fetch_inferior_registers)
(aarch64_linux_store_inferior_registers)
(aarch64_linux_child_post_startup_inferior)
(aarch64_linux_read_description)
(aarch64_linux_can_use_hw_breakpoint)
(aarch64_linux_insert_hw_breakpoint)
(aarch64_linux_remove_hw_breakpoint)
(aarch64_linux_insert_watchpoint, aarch64_linux_remove_watchpoint)
(aarch64_linux_region_ok_for_hw_watchpoint)
(aarch64_linux_stopped_data_address)
(aarch64_linux_stopped_by_watchpoint)
(aarch64_linux_watchpoint_addr_within_range)
(aarch64_linux_can_do_single_step): Refactor as methods of
aarch64_linux_nat_target.
(super_post_startup_inferior): Delete.
(_initialize_aarch64_linux_nat): Adjust to C++ification.
* hppa-linux-nat.c (hppa_linux_nat_target): New class.
(the_hppa_linux_nat_target): New.
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Refactor as methods of
hppa_linux_nat_target.
(_initialize_hppa_linux_nat): Adjust to C++ification.
* ia64-linux-nat.c (ia64_linux_nat_target): New class.
(the_ia64_linux_nat_target): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint)
(ia64_linux_stopped_data_address)
(ia64_linux_stopped_by_watchpoint, ia64_linux_fetch_registers)
(ia64_linux_store_registers, ia64_linux_xfer_partial): Refactor as
ia64_linux_nat_target methods.
(super_xfer_partial): Delete.
(_initialize_ia64_linux_nat): Adjust to C++ification.
* m32r-linux-nat.c (m32r_linux_nat_target): New class.
(the_m32r_linux_nat_target): New.
(m32r_linux_fetch_inferior_registers)
(m32r_linux_store_inferior_registers): Refactor as
m32r_linux_nat_target methods.
(_initialize_m32r_linux_nat): Adjust to C++ification.
* m68k-linux-nat.c (m68k_linux_nat_target): New class.
(the_m68k_linux_nat_target): New.
(m68k_linux_fetch_inferior_registers)
(m68k_linux_store_inferior_registers): Refactor as
m68k_linux_nat_target methods.
(_initialize_m68k_linux_nat): Adjust to C++ification.
* s390-linux-nat.c (s390_linux_nat_target): New class.
(the_s390_linux_nat_target): New.
(s390_linux_fetch_inferior_registers)
(s390_linux_store_inferior_registers, s390_stopped_by_watchpoint)
(s390_insert_watchpoint, s390_remove_watchpoint)
(s390_can_use_hw_breakpoint, s390_insert_hw_breakpoint)
(s390_remove_hw_breakpoint, s390_region_ok_for_hw_watchpoint)
(s390_auxv_parse, s390_read_description): Refactor as methods of
s390_linux_nat_target.
(_initialize_s390_nat): Adjust to C++ification.
* sparc-linux-nat.c (sparc_linux_nat_target): New class.
(the_sparc_linux_nat_target): New.
(_initialize_sparc_linux_nat): Adjust to C++ification.
* sparc-nat.c (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers): Remove target_ops parameter.
* sparc64-linux-nat.c (sparc64_linux_nat_target): New class.
(the_sparc64_linux_nat_target): New.
(_initialize_sparc64_linux_nat): Adjust to C++ification.
* spu-linux-nat.c (spu_linux_nat_target): New class.
(the_spu_linux_nat_target): New.
(spu_child_post_startup_inferior, spu_child_post_attach)
(spu_child_wait, spu_fetch_inferior_registers)
(spu_store_inferior_registers, spu_xfer_partial)
(spu_can_use_hw_breakpoint): Refactor as spu_linux_nat_target
methods.
(_initialize_spu_nat): Adjust to C++ification.
* tilegx-linux-nat.c (tilegx_linux_nat_target): New class.
(the_tilegx_linux_nat_target): New.
(fetch_inferior_registers, store_inferior_registers):
Refactor as methods.
(_initialize_tile_linux_nat): Adjust to C++ification.
* xtensa-linux-nat.c (xtensa_linux_nat_target): New class.
(the_xtensa_linux_nat_target): New.
(xtensa_linux_fetch_inferior_registers)
(xtensa_linux_store_inferior_registers): Refactor as
xtensa_linux_nat_target methods.
(_initialize_xtensa_linux_nat): Adjust to C++ification.
* fbsd-nat.c (USE_SIGTRAP_SIGINFO): Delete.
(fbsd_pid_to_exec_file, fbsd_find_memory_regions)
(fbsd_find_memory_regions, fbsd_info_proc, fbsd_xfer_partial)
(fbsd_thread_alive, fbsd_pid_to_str, fbsd_thread_name)
(fbsd_update_thread_list, fbsd_resume, fbsd_wait)
(fbsd_stopped_by_sw_breakpoint)
(fbsd_supports_stopped_by_sw_breakpoint, fbsd_follow_fork)
(fbsd_insert_fork_catchpoint, fbsd_remove_fork_catchpoint)
(fbsd_insert_vfork_catchpoint, fbsd_remove_vfork_catchpoint)
(fbsd_post_startup_inferior, fbsd_post_attach)
(fbsd_insert_exec_catchpoint, fbsd_remove_exec_catchpoint)
(fbsd_set_syscall_catchpoint)
(super_xfer_partial, super_resume, super_wait)
(fbsd_supports_stopped_by_hw_breakpoint): Delete.
(fbsd_handle_debug_trap): Remove target_ops parameter.
(fbsd_nat_add_target): Delete.
* fbsd-nat.h: Include "inf-ptrace.h".
(fbsd_nat_add_target): Delete.
(USE_SIGTRAP_SIGINFO): Define.
(fbsd_nat_target): New class.
* amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers)
(amd64bsd_store_inferior_registers): Remove target_ops parameter.
(amd64bsd_target): Delete.
* amd64-bsd-nat.h: New file.
* amd64-fbsd-nat.c: Include "amd64-bsd-nat.h" instead of
"x86-bsd-nat.h".
(amd64_fbsd_nat_target): New class.
(the_amd64_fbsd_nat_target): New.
(amd64fbsd_read_description): Refactor as method of
amd64_fbsd_nat_target.
(amd64_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_amd64fbsd_nat): Adjust to C++ification.
* amd64-nat.h (amd64bsd_target): Delete function declaration.
* i386-bsd-nat.c (i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Remove target_ops parameter.
(i386bsd_target): Delete.
* i386-bsd-nat.h (i386bsd_target): Delete function declaration.
(i386bsd_fetch_inferior_registers)
(i386bsd_store_inferior_registers): Declare.
(i386_bsd_nat_target): New class.
* i386-fbsd-nat.c (i386_fbsd_nat_target): New class.
(the_i386_fbsd_nat_target): New.
(i386fbsd_resume, i386fbsd_read_description): Refactor as
i386_fbsd_nat_target methods.
(i386_fbsd_nat_target::supports_stopped_by_hw_breakpoint): New.
(_initialize_i386fbsd_nat): Adjust to C++ification.
* x86-bsd-nat.c (super_mourn_inferior): Delete.
(x86bsd_mourn_inferior, x86bsd_target): Delete.
(_initialize_x86_bsd_nat): Adjust to C++ification.
* x86-bsd-nat.h: Include "x86-nat.h".
(x86bsd_target): Delete declaration.
(x86bsd_nat_target): New class.
* aarch64-fbsd-nat.c (aarch64_fbsd_nat_target): New class.
(the_aarch64_fbsd_nat_target): New.
(aarch64_fbsd_fetch_inferior_registers)
(aarch64_fbsd_store_inferior_registers): Refactor as methods of
aarch64_fbsd_nat_target.
(_initialize_aarch64_fbsd_nat): Adjust to C++ification.
* alpha-bsd-nat.c (alpha_bsd_nat_target): New class.
(the_alpha_bsd_nat_target): New.
(alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Refactor as
alpha_bsd_nat_target methods.
(_initialize_alphabsd_nat): Refactor as methods of
alpha_bsd_nat_target.
* amd64-nbsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_nbsd_nat_target): New.
(_initialize_amd64nbsd_nat): Adjust to C++ification.
* amd64-obsd-nat.c: Include "amd64-bsd-nat.h".
(the_amd64_obsd_nat_target): New.
(_initialize_amd64obsd_nat): Adjust to C++ification.
* arm-fbsd-nat.c (arm_fbsd_nat_target): New.
(the_arm_fbsd_nat_target): New.
(arm_fbsd_fetch_inferior_registers)
(arm_fbsd_store_inferior_registers, arm_fbsd_read_description):
(_initialize_arm_fbsd_nat): Refactor as methods of
arm_fbsd_nat_target.
(_initialize_arm_fbsd_nat): Adjust to C++ification.
* arm-nbsd-nat.c (arm_netbsd_nat_target): New class.
(the_arm_netbsd_nat_target): New.
(armnbsd_fetch_registers, armnbsd_store_registers): Refactor as
arm_netbsd_nat_target.
(_initialize_arm_netbsd_nat): Adjust to C++ification.
* hppa-nbsd-nat.c (hppa_nbsd_nat_target): New class.
(the_hppa_nbsd_nat_target): New.
(hppanbsd_fetch_registers, hppanbsd_store_registers): Refactor as
hppa_nbsd_nat_target methods.
(_initialize_hppanbsd_nat): Adjust to C++ification.
* hppa-obsd-nat.c (hppa_obsd_nat_target): New class.
(the_hppa_obsd_nat_target): New.
(hppaobsd_fetch_registers, hppaobsd_store_registers): Refactor as
methods of hppa_obsd_nat_target.
(_initialize_hppaobsd_nat): Adjust to C++ification. Use
add_target.
* i386-nbsd-nat.c (the_i386_nbsd_nat_target): New.
(_initialize_i386nbsd_nat): Adjust to C++ification. Use
add_target.
* i386-obsd-nat.c (the_i386_obsd_nat_target): New.
(_initialize_i386obsd_nat): Use add_target.
* m68k-bsd-nat.c (m68k_bsd_nat_target): New class.
(the_m68k_bsd_nat_target): New.
(m68kbsd_fetch_inferior_registers)
(m68kbsd_store_inferior_registers): Refactor as methods of
m68k_bsd_nat_target.
(_initialize_m68kbsd_nat): Adjust to C++ification.
* mips-fbsd-nat.c (mips_fbsd_nat_target): New class.
(the_mips_fbsd_nat_target): New.
(mips_fbsd_fetch_inferior_registers)
(mips_fbsd_store_inferior_registers): Refactor as methods of
mips_fbsd_nat_target.
(_initialize_mips_fbsd_nat): Adjust to C++ification. Use
add_target.
* mips-nbsd-nat.c (mips_nbsd_nat_target): New class.
(the_mips_nbsd_nat_target): New.
(mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Refactor as methods of
mips_nbsd_nat_target.
(_initialize_mipsnbsd_nat): Adjust to C++ification.
* mips64-obsd-nat.c (mips64_obsd_nat_target): New class.
(the_mips64_obsd_nat_target): New.
(mips64obsd_fetch_inferior_registers)
(mips64obsd_store_inferior_registers): Refactor as methods of
mips64_obsd_nat_target.
(_initialize_mips64obsd_nat): Adjust to C++ification. Use
add_target.
* nbsd-nat.c (nbsd_pid_to_exec_file): Refactor as method of
nbsd_nat_target.
* nbsd-nat.h: Include "inf-ptrace.h".
(nbsd_nat_target): New class.
* obsd-nat.c (obsd_pid_to_str, obsd_update_thread_list)
(obsd_wait): Refactor as methods of obsd_nat_target.
(obsd_add_target): Delete.
* obsd-nat.h: Include "inf-ptrace.h".
(obsd_nat_target): New class.
* ppc-fbsd-nat.c (ppc_fbsd_nat_target): New class.
(the_ppc_fbsd_nat_target): New.
(ppcfbsd_fetch_inferior_registers)
(ppcfbsd_store_inferior_registers): Refactor as methods of
ppc_fbsd_nat_target.
(_initialize_ppcfbsd_nat): Adjust to C++ification. Use
add_target.
* ppc-nbsd-nat.c (ppc_nbsd_nat_target): New class.
(the_ppc_nbsd_nat_target): New.
(ppcnbsd_fetch_inferior_registers)
(ppcnbsd_store_inferior_registers): Refactor as methods of
ppc_nbsd_nat_target.
(_initialize_ppcnbsd_nat): Adjust to C++ification.
* ppc-obsd-nat.c (ppc_obsd_nat_target): New class.
(the_ppc_obsd_nat_target): New.
(ppcobsd_fetch_registers, ppcobsd_store_registers): Refactor as
methods of ppc_obsd_nat_target.
(_initialize_ppcobsd_nat): Adjust to C++ification. Use
add_target.
* sh-nbsd-nat.c (sh_nbsd_nat_target): New class.
(the_sh_nbsd_nat_target): New.
(shnbsd_fetch_inferior_registers)
(shnbsd_store_inferior_registers): Refactor as methods of
sh_nbsd_nat_target.
(_initialize_shnbsd_nat): Adjust to C++ification.
* sparc-nat.c (sparc_xfer_wcookie): Make extern.
(inf_ptrace_xfer_partial): Delete.
(sparc_xfer_partial, sparc_target): Delete.
* sparc-nat.h (sparc_fetch_inferior_registers)
(sparc_store_inferior_registers, sparc_xfer_wcookie): Declare.
(sparc_target): Delete function declaration.
(sparc_target): New template class.
* sparc-nbsd-nat.c (the_sparc_nbsd_nat_target): New.
(_initialize_sparcnbsd_nat): Adjust to C++ification.
* sparc64-fbsd-nat.c (the_sparc64_fbsd_nat_target): New.
(_initialize_sparc64fbsd_nat): Adjust to C++ification. Use
add_target.
* sparc64-nbsd-nat.c (the_sparc64_nbsd_nat_target): New.
(_initialize_sparc64nbsd_nat): Adjust to C++ification.
* sparc64-obsd-nat.c (the_sparc64_obsd_nat_target): New.
(_initialize_sparc64obsd_nat): Adjust to C++ification. Use
add_target.
* vax-bsd-nat.c (vax_bsd_nat_target): New class.
(the_vax_bsd_nat_target): New.
(vaxbsd_fetch_inferior_registers)
(vaxbsd_store_inferior_registers): Refactor as vax_bsd_nat_target
methods.
(_initialize_vaxbsd_nat): Adjust to C++ification.
* bsd-kvm.c (bsd_kvm_target): New class.
(bsd_kvm_ops): Now a bsd_kvm_target.
(bsd_kvm_open, bsd_kvm_close, bsd_kvm_xfer_partial)
(bsd_kvm_files_info, bsd_kvm_fetch_registers)
(bsd_kvm_thread_alive, bsd_kvm_pid_to_str): Refactor as methods of
bsd_kvm_target.
(bsd_kvm_return_one): Delete.
(bsd_kvm_add_target): Adjust to C++ification.
* nto-procfs.c (nto_procfs_target, nto_procfs_target_native)
(nto_procfs_target_procfs): New classes.
(procfs_open_1, procfs_thread_alive, procfs_update_thread_list)
(procfs_files_info, procfs_pid_to_exec_file, procfs_attach)
(procfs_post_attach, procfs_wait, procfs_fetch_registers)
(procfs_xfer_partial, procfs_detach, procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint, procfs_resume)
(procfs_mourn_inferior, procfs_create_inferior, procfs_interrupt)
(procfs_kill_inferior, procfs_store_registers)
(procfs_pass_signals, procfs_pid_to_str, procfs_can_run): Refactor
as methods of nto_procfs_target.
(nto_procfs_ops): Now an nto_procfs_target_procfs.
(nto_native_ops): Delete.
(procfs_open, procfs_native_open): Delete.
(nto_native_ops): Now an nto_procfs_target_native.
(init_procfs_targets): Adjust to C++ification.
(procfs_can_use_hw_breakpoint, procfs_remove_hw_watchpoint)
(procfs_insert_hw_watchpoint, procfs_stopped_by_watchpoint):
Refactor as methods of nto_procfs_target.
* go32-nat.c (go32_nat_target): New class.
(the_go32_nat_target): New.
(go32_attach, go32_resume, go32_wait, go32_fetch_registers)
(go32_store_registers, go32_xfer_partial, go32_files_info)
(go32_kill_inferior, go32_create_inferior, go32_mourn_inferior)
(go32_terminal_init, go32_terminal_info, go32_terminal_inferior)
(go32_terminal_ours, go32_pass_ctrlc, go32_thread_alive)
(go32_pid_to_str): Refactor as methods of go32_nat_target.
(go32_target): Delete.
(_initialize_go32_nat): Adjust to C++ification.
* gnu-nat.c (gnu_wait, gnu_resume, gnu_kill_inferior)
(gnu_mourn_inferior, gnu_create_inferior, gnu_attach, gnu_detach)
(gnu_stop, gnu_thread_alive, gnu_xfer_partial)
(gnu_find_memory_regions, gnu_pid_to_str): Refactor as methods of
gnu_nat_target.
(gnu_target): Delete.
* gnu-nat.h (gnu_target): Delete.
(gnu_nat_target): New class.
* i386-gnu-nat.c (gnu_base_target): New.
(i386_gnu_nat_target): New class.
(the_i386_gnu_nat_target): New.
(_initialize_i386gnu_nat): Adjust to C++ification.
gdb/testsuite/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
to_log_command renames.
* gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
This patch aims to turn 'set print inferior-events' always on, and do
some cleanup on the messages printed by GDB when various inferior
events happen (attach, detach, fork, kill, exit).
To make sure that the patch is correct, I've tested it with a handful
of combinations of 'set follow-fork-mode', 'set detach-on-fork' and
'set print inferior-events'. In the end, I decided to make my
hand-made test into an official testcase. More on that below.
Using the following program as an example:
#include <unistd.h>
int main ()
{
fork ();
return 0;
}
We see the following outputs from the patched GDB:
- With 'set print inferior-events on':
(gdb) r
Starting program: a.out
[Detaching after fork from child process 27749]
[Inferior 1 (process 27745) exited normally]
(gdb)
- With 'set print inferior-events off':
(gdb) r
Starting program: a.out
[Inferior 1 (process 27823) exited normally]
(gdb)
Comparing this against an unpatched GDB:
- With 'set print inferior-events off' and 'set follow-fork-mode
child':
(gdb) r
Starting program: a.out
[Inferior 2 (process 5993) exited normally]
(gdb)
Compare this against an unpatched GDB:
(unpatched-gdb) r
Starting program: a.out
[New process 5702]
[Inferior 2 (process 5702) exited normally]
(unpatched-gdb)
It is possible to notice that, in this scenario, the patched GDB
will lose the '[New process %d]' message.
- With 'set print inferior-events on', 'set follow-fork-mode child'
and 'set detach-on-fork on':
(gdb) r
Starting program: a.out
[Attaching after process 27905 fork to child process 27909]
[New inferior 2 (process 27909)]
[Detaching after fork from parent process 27905]
[Inferior 1 (process 27905) detached]
[Inferior 2 (process 27909) exited normally]
(gdb)
Compare this output with an unpatched GDB, using the same settings:
(unpatched-gdb) r
Starting program: a.out
[New inferior 28033]
[Inferior 28029 detached]
[New process 28033]
[Inferior 2 (process 28033) exited normally]
[Inferior 28033 exited]
(unpatched-gdb)
As can be seen above, I've also made a few modifications to messages
that are printed when 'set print inferior-events' is on. For example,
a few of the messages did not contain the '[' and ']' as
prefix/suffix, which led to a few inconsistencies like:
Attaching after process 22995 fork to child process 22999.
[New inferior 22999]
Detaching after fork from child process 22999.
[Inferior 22995 detached]
[Inferior 2 (process 22999) exited normally]
So I took the opportunity and included the square brackets where
applicable. I have also made the existing messages more uniform, by
always printing "Inferior %d (process %d)..." where applicable. This
makes it easier to identify the inferior number and the PID number
from the messages.
As suggested by Pedro, the "[Inferior %d exited]" message from
'exit_inferior' has been removed, because it got duplicated when
'inferior-events' is on. I'm also using the
'add_{thread,inferior}_silent' versions (instead of their verbose
counterparts) on some locations, also to avoid duplicated messages.
For example, a patched GDB with 'set print inferior-events on', 'set
detach-on-fork on' and 'set follow-fork-mode child', but using
'add_thread', would print:
(gdb) run
Starting program: a.out
[Attaching after process 25088 fork to child process 25092.]
[New inferior 25092] <--- duplicated
[Detaching after fork from child process 25092.]
[Inferior 25088 detached]
[New process 25092] <--- duplicated
[Inferior 2 (process 25092) exited normally]
But if we use 'add_thread_silent' (with the same configuration as
before):
(gdb) run
Starting program: a.out
[Attaching after process 31606 fork to child process 31610]
[New inferior 2 (process 31610)]
[Detaching after fork from parent process 31606]
[Inferior 1 (process 31606) detached]
[Inferior 2 (process 31610) exited normally]
As for the tests, the configuration options being exercised are:
- follow-fork-mode: child/parent
- detach-on-fork: on/off
- print inferior-events: on/off
It was also necessary to perform adjustments on several testcases,
because the expected messages changed considerably.
Built and regtested on BuildBot, without regressions.
gdb/ChangeLog:
2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* infcmd.c (kill_command): Print message when inferior has
been killed.
* inferior.c (print_inferior_events): Remove 'static'. Set as
'1'.
(add_inferior): Improve message printed when
'print_inferior_events' is on.
(exit_inferior): Remove message printed when
'print_inferior_events' is on.
(detach_inferior): Improve message printed when
'print_inferior_events' is on.
(initialize_inferiors): Use 'add_inferior_silent' to set
'current_inferior_'.
* inferior.h (print_inferior_events): Declare here as
'extern'.
* infrun.c (follow_fork_inferior): Print '[Attaching...]' or
'[Detaching...]' messages when 'print_inferior_events' is on.
Use 'add_thread_silent' instead of 'add_thread'. Add '[' and ']'
as prefix/suffix for messages. Remove periods. Fix erroneous
'Detaching after fork from child...', replace it by '... from
parent...'.
(handle_vfork_child_exec_or_exit): Add '[' and ']' as
prefix/suffix when printing 'Detaching...' messages. Print
them when 'print_inferior_events' is on.
* remote.c (remote_detach_1): Print message when detaching
from inferior and '!is_fork_parent'.
gdb/testsuite/ChangeLog:
2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/attach-non-pgrp-leader.exp: Adjust 'Detaching...'
regexps to expect for '[Inferior ... detached]' as well.
* gdb.base/attach.exp: Likewise.
* gdb.base/catch-syscall.exp (check_for_program_end): Adjust
"gdb_continue_to_end".
(test_catch_syscall_with_wrong_args): Likewise.
* gdb.base/foll-fork.exp: Adjust regexps to match '[' and
']'. Don't set 'verbose' on.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/fork-print-inferior-events.c: New file.
* gdb.base/fork-print-inferior-events.exp: New file.
* gdb.base/hook-stop.exp: Adjust regexps to expect for new
'[Inferior ... has been killed]' message.
* gdb.base/kill-after-signal.exp: Likewise.
* gdb.base/solib-overlap.exp: Adjust regexps to expect for new
detach message.
* gdb.threads/kill.exp: Adjust regexps to expect for new kill
message.
* gdb.threads/clone-attach-detach.exp: Adjust 'Detaching...'
regexps to expect for '[Inferior ... detached]' as well.
* gdb.threads/process-dies-while-detaching.exp: Likewise.
With version 7.3 GCC supports new options
-mindirect-branch=<choice>
-mfunction-return=<choice>
The choices are:
keep behaves as before
thunk jumps through a thunk
thunk-external jumps through an external thunk
thunk-inline jumps through an inlined thunk
For thunk and thunk-external, GDB would, on a call to the thunk, step into
the thunk and then resume to its caller assuming that this is an
undebuggable function. On a return thunk, GDB would stop inside the
thunk.
Make GDB step through such thunks instead.
Before:
Temporary breakpoint 1, main ()
at gdb.base/step-indirect-call-thunk.c:37
37 x = apply (inc, 41);
(gdb) s
apply (op=0x80483e6 <inc>, x=41)
at gdb.base/step-indirect-call-thunk.c:29
29 return op (x);
(gdb)
30 }
After:
Temporary breakpoint 1, main ()
at gdb.base/step-indirect-call-thunk.c:37
37 x = apply (inc, 41);
(gdb) s
apply (op=0x80483e6 <inc>, x=41)
at gdb.base/step-indirect-call-thunk.c:29
29 return op (x);
(gdb)
inc (x=41) at gdb.base/step-indirect-call-thunk.c:23
23 return x + 1;
This is independent of the step-mode. In order to step into the thunk,
you would need to use stepi.
When stepping over an indirect call thunk, GDB would first step through
the thunk, then recognize that it stepped into a sub-routine and resume to
the caller (of the thunk). Not sure whether this is worth optimizing.
Thunk detection is implemented via gdbarch. I implemented the methods for
IA. Other architectures may run into unexpected fails.
The tests assume a fixed number of instruction steps to reach a thunk.
This depends on the compiler as well as the architecture. They may need
adjustments when we add support for more architectures. Or we can simply
drop those tests that cover being able to step into thunks using
instruction stepping.
When using an older GCC, the tests will fail to build and will be reported
as untested:
Running .../gdb.base/step-indirect-call-thunk.exp ...
gdb compile failed, \
gcc: error: unrecognized command line option '-mindirect-branch=thunk'
gcc: error: unrecognized command line option '-mfunction-return=thunk'
=== gdb Summary ===
# of untested testcases 1
gdb/
* infrun.c (process_event_stop_test): Call
gdbarch_in_indirect_branch_thunk.
* gdbarch.sh (in_indirect_branch_thunk): New.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* x86-tdep.h: New.
* x86-tdep.c: New.
* Makefile.in (ALL_TARGET_OBS): Add x86-tdep.o.
(HFILES_NO_SRCDIR): Add x86-tdep.h.
(ALLDEPFILES): Add x86-tdep.c.
* arch-utils.h (default_in_indirect_branch_thunk): New.
* arch-utils.c (default_in_indirect_branch_thunk): New.
* i386-tdep: Include x86-tdep.h.
(i386_in_indirect_branch_thunk): New.
(i386_elf_init_abi): Set in_indirect_branch_thunk gdbarch
function.
* amd64-tdep: Include x86-tdep.h.
(amd64_in_indirect_branch_thunk): New.
(amd64_init_abi): Set in_indirect_branch_thunk gdbarch function.
testsuite/
* gdb.base/step-indirect-call-thunk.exp: New.
* gdb.base/step-indirect-call-thunk.c: New.
* gdb.reverse/step-indirect-call-thunk.exp: New.
* gdb.reverse/step-indirect-call-thunk.c: New.
I put the constructor in tracepoint.c because it needs to read
traceframe_number, and I prefer to do that than to expose
traceframe_number.
gdb/ChangeLog:
* tracepoint.c (struct current_traceframe_cleanup): Remove.
(do_restore_current_traceframe_cleanup): Remove.
(restore_current_traceframe_cleanup_dtor): Remove.
(make_cleanup_restore_current_traceframe): Remove.
(scoped_restore_current_traceframe::scoped_restore_current_traceframe):
New.
* tracepoint.h (struct scoped_restore_current_traceframe): New.
* infrun.c (fetch_inferior_event): Use
scoped_restore_current_traceframe.
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
This patch makes program_space a C++ object by adding a
constructor/destructor, giving default values to fields, and using
new/delete.
gdb/ChangeLog:
* progspace.h (struct program_space): Add constructor and
destructor, initialize fields.
(add_program_space): Remove.
* progspace.c (add_program_space): Rename to...
(program_space::program_space): ... this.
(release_program_space): Rename to...
(program_space::~program_space): ... this.
(delete_program_space): Use delete to delete program_space.
(initialize_progspace): Use new to allocate program_space.
* inferior.c (add_inferior_with_spaces): Likewise.
(clone_inferior_command): Likewise.
* infrun.c (follow_fork_inferior): Likewise.
(handle_vfork_child_exec_or_exit): Likewise.
This patch adds a new class (type) for readonly regcache, which is
created via regcache::save. readonly_detached_regcache inherits
readable_regcache.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* dummy-frame.c (dummy_frame_cache) <prev_regcache>: Use
readonly_detached_regcache.
(dummy_frame_prev_register): Use regcache->cooked_read.
* frame.c (frame_save_as_regcache): Change return type.
(frame_pop): Update.
* frame.h (frame_save_as_regcache): Update declaration.
* inferior.h (get_infcall_suspend_state_regcache): Update
declaration.
* infrun.c (infcall_suspend_state) <registers>: use
readonly_detached_regcache.
(save_infcall_suspend_state): Don't use regcache_dup.
(get_infcall_suspend_state_regcache): Change return type.
* linux-fork.c (struct fork_info) <savedregs>: Change to
readonly_detached_regcache.
<pc>: New field.
(fork_save_infrun_state): Don't use regcache_dup.
(info_checkpoints_command): Adjust.
* mi/mi-main.c (register_changed_p): Update declaration.
(mi_cmd_data_list_changed_registers): Use
readonly_detached_regcache.
(register_changed_p): Change parameter type to
readonly_detached_regcache.
* ppc-linux-tdep.c (ppu2spu_cache) <regcache>: Use
readonly_detached_regcache.
(ppu2spu_sniffer): Construct a new readonly_detached_regcache.
* regcache.c (readonly_detached_regcache::readonly_detached_regcache):
New.
(regcache::save): Move it to reg_buffer.
(regcache::restore): Change parameter type.
(regcache_dup): Remove.
* regcache.h (reg_buffer) <save>: New method.
(readonly_detached_regcache): New class.
* spu-tdep.c (spu2ppu_cache) <regcache>: Use
readonly_detached_regcache.
(spu2ppu_sniffer): Construct a new readonly_detached_regcache.
... instead we start to use regcache methods save and restore. It is
quite straightforward to replace regcache_save with regcache->save.
regcache_cpy has some asserts, some of them not necessary, like
gdb_assert (src != dst);
because we already assert !m_readonly_p and src->m_readonly_p, so
src isn't dst. Some of the asserts are moved to ::restore.
gdb:
2018-02-21 Yao Qi <yao.qi@linaro.org>
* frame.c (frame_save_as_regcache): Use regcache method save.
(frame_pop): Use regcache method restore.
* infrun.c (restore_infcall_suspend_state): Likewise.
* linux-fork.c (fork_load_infrun_state): Likewise.
* ppc-linux-tdep.c (ppu2spu_sniffer): User regcache method
save.
* regcache.c (regcache_save): Remove.
(regcache::restore): More asserts.
(regcache_cpy): Remove.
* regcache.h (regcache_save): Remove the declaration.
(regcache::restore): Move from private to public.
Remove the friend declaration of regcache_cpy.
(regcache_cpy): Remove declaration.
This changes a couple of solib.c functions -- exec_file_find and
solib_find -- to return a unique_xmalloc_ptr, and then fixes up the
users. This allows the removal of some cleanups.
This also changes solib_bfd_open to not take ownership of its
argument. I think this change is somewhat cleaner.
gdb/ChangeLog
2018-02-14 Tom Tromey <tom@tromey.com>
* solist.h (exec_file_find, solib_find): Return
unique_xmalloc_ptr.
(solib_bfd_fopen): Take a const char *.
* solib.c (solib_find_1): Return unique_xmalloc_ptr.
(exec_file_find, solib_find): Likewise.
(solib_bfd_fopen): Do not take ownership of "pathname".
(solib_bfd_open): Use unique_xmalloc_ptr.
* solib-darwin.c (darwin_bfd_open): Use unique_xmalloc_ptr.
* solib-aix.c (solib_aix_bfd_open): Use unique_xmalloc_ptr.
* infrun.c (follow_exec): Use unique_xmalloc_ptr.
* exec.c (exec_file_locate_attach): Use unique_xmalloc_ptr.
The to_detach target_ops method implementations are currently expected
to work on current_inferior/inferior_ptid. In order to make things more
explicit, and remove some "shadow" parameter passing through globals,
this patch adds an "inferior" parameter to to_detach. Implementations
will be expected to use this instead of relying on the global. However,
to keep things simple, this patch only does the minimum that is
necessary to add the parameter. The following patch gives an example of
how one such implementation would be adapted. If the approach is deemed
good, we can then look into adapting more implementations. Until then,
they'll continue to work as they do currently.
gdb/ChangeLog:
* target.h (struct target_ops) <to_detach>: Add inferior
parameter.
(target_detach): Likewise.
* target.c (dispose_inferior): Pass inferior down.
(target_detach): Pass inferior down. Assert that it is equal to
the current inferior.
* aix-thread.c (aix_thread_detach): Pass inferior down.
* corefile.c (core_file_command): Pass current_inferior() down.
* corelow.c (core_detach): Add inferior parameter.
* darwin-nat.c (darwin_detach): Likewise.
* gnu-nat.c (gnu_detach): Likewise.
* inf-ptrace.c (inf_ptrace_detach): Likewise.
* infcmd.c (detach_command): Pass current_inferior() down to
target_detach.
* infrun.c (follow_fork_inferior): Pass parent_inf to
target_detach.
(handle_vfork_child_exec_or_exit): Pass inf->vfork_parent to
target_detach.
* linux-nat.c (linux_nat_detach): Add inferior parameter.
* linux-thread-db.c (thread_db_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* procfs.c (procfs_detach): Likewise.
* record.c (record_detach): Likewise.
* record.h (struct inferior): Forward-declare.
(record_detach): Add inferior parameter.
* remote-sim.c (gdbsim_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_detach): Likewise.
(extended_remote_detach): Likewise.
* sol-thread.c (sol_thread_detach): Likewise.
* target-debug.h (target_debug_print_inferior_p): New macro.
* target-delegates.c: Re-generate.
* top.c (kill_or_detach): Pass inferior down to target_detach.
* windows-nat.c (windows_detach): Add inferior parameter.
I was looking into adding a parameter to target_detach, and was
wondering what the args parameter was. It seems like in the distant
past, it was possible to specify a signal number when detaching. That
signal was injected in the process before it was detached. There is an
example of code handling this in linux_nat_detach. With today's GDB, I
can't get this to work. Doing "detach 15" (15 == SIGTERM) doesn't work,
because detach is a prefix command and doesn't recognize the sub-command
15. Doing "detach inferiors 15" doesn't work because it expects a list
of inferior id to detach. Therefore, I don't think there's a way of
invoking detach_command with a non-NULL args. I also didn't find any
documentation related to this feature.
I assume that this feature stopped working when detach was made a prefix
command, which is in f73adfeb8b (sorry,
there's no commit title) from 2006. Given that this feature was broken
for such a long time and we haven't heard anything (AFAIK, I did not
find any related bug), I think it's safe to remove it, as well as the
args parameter to target_detach. If someone wants to re-introduce it, I
would suggest rethinking the user interface, and in particular would
suggest using signal name instead of numbers.
I tried to fix all the impacted code, but I might have forgotten some
spots. It shouldn't be hard to fix if that's the case. I also couldn't
build-test everything I changed, especially the nto and solaris stuff.
gdb/ChangeLog:
* target.h (struct target_ops) <to_detach>: Remove args
parameter.
(target_detach): Likewise.
* target.c (dispose_inferior): Adjust.
(target_detach): Remove args parameter, adjust.
* aix-thread.c (aix_thread_detach): Adjust.
* corefile.c (core_file_command): Adjust.
* corelow.c (core_detach): Adjust.
* darwin-nat.c (darwin_detach): Adjust.
* gnu-nat.c (gnu_detach): Adjust.
* inf-ptrace.c (inf_ptrace_detach): Adjust.
* infcmd.c (detach_command): Adjust
* infrun.c (follow_fork_inferior): Adjust.
(handle_vfork_child_exec_or_exit): Adjust.
* linux-fork.c (linux_fork_detach): Remove args parameter.
* linux-fork.h (linux_fork_detach): Likewise.
* linux-nat.c (linux_nat_detach): Likewise, and adjust.
* linux-thread-db.c (thread_db_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* procfs.c (procfs_detach): Likewise.
(do_detach): Remove signo parameter.
* record.c (record_detach): Remove args parameter.
* record.h (record_detach): Likewise.
* remote-sim.c (gdbsim_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
(remote_detach): Likewise.
(extended_remote_detach): Likewise.
* sol-thread.c (sol_thread_detach): Likewise.
* target-delegates.c: Re-generate.
* top.c (struct qt_args) <args>: Remove field.
(kill_or_detach): Don't pass args.
(quit_force): Don't set args.
* windows-nat.c (windows_detach): Remove args parameter.
Since this commit --
Fix PR18360 - internal error when using "interrupt -a"
(https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=c65d6b55)
-- the testsuite shows long delays on s390 with native-gdbserver when
executing certain tests, such as watchpoints.exp. These hangs have been
discussed before in the context of buildbot problems, see here:
https://sourceware.org/ml/gdb-patches/2017-12/msg00413.html
The problem can easily be triggered by stopping on a breakpoint, then
setting impossible watchpoints, and finally doing "continue". Then, after
having set the step-over state (in keep_going_pass_signal in infrun.c),
GDB tries to insert breakpoints and watchpoints into the inferior. This
fails, and the "continue" command is aborted. But the step-over state is
not cleared in this case, which causes future step-over attempts to be
skipped since GDB thinks that "we already have an in-line step-over
operation ongoing" (see start_step_over in infrun.c). Thus the next
"continue" just goes on to wait for events from the remote, which will
never occur.
The problem can also be reproduced on amd64 with native-gdbserver, using
the following change to watchpoints.exp:
-- >8 --
--- a/gdb/testsuite/gdb.base/watchpoints.exp
+++ b/gdb/testsuite/gdb.base/watchpoints.exp
@@ -61,2 +61,3 @@ with_test_prefix "before inferior start" {
gdb_test "watch ival3" ".*" ""
+ gdb_test "watch *(char \[256\] *) main"
-- >8 --
To fix the hang, this patch clears the step-over info when
insert_breakpoints has failed. Of course, with native-gdbserver the
watchpoints.exp test case still causes many FAILs on s390, because
gdbserver does not support watchpoints for that target. This is a
separate issue.
gdb/ChangeLog:
2018-01-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
* infrun.c (keep_going_pass_signal): Clear step-over info when
insert_breakpoints fails.
As Maciej reported at
<https://sourceware.org/ml/gdb-patches/2017-12/msg00212.html>, this
commit:
commit d930703d68
Date: Thu Nov 16 18:44:43 2017 +0000
Subject: Don't ever Quit out of resume
caused regressions on software single-set targets, specifically:
FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw off: single-step breakpoint is not left behind
FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw on: single-step breakpoint is not left behind
FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted on: auto-hw off: step in ro region (cannot insert hw break)
FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted on: auto-hw off: single-step breakpoint is not left behind
FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted on: auto-hw on: single-step breakpoint is not left behind
and indeed detailed logs indicate a breakpoint is left lingering, e.g.:
(gdb) PASS: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw off: step in ro region (cannot insert sw break)
maint info breakpoints 0
Num Type Disp Enb Address What
0 sw single-step keep y 0x00400774 in main at [...]/gdb/testsuite/gdb.base/breakpoint-in-ro-region.c:24 inf 1 thread 1
stop only in thread 1
(gdb) FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw off: single-step breakpoint is not left behind
vs:
(gdb) PASS: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw off: step in ro region (cannot insert sw break)
maint info breakpoints 0
No breakpoint or watchpoint matching '0'.
(gdb) PASS: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw off: single-step breakpoint is not left behind
as at commit d930703d68ae^.
Before commit d930703d68, we had a cleanup installed in 'resume'
that would delete single-step breakpoints on error:
/* Resuming. */
/* Things to clean up if we QUIT out of resume (). */
static void
resume_cleanups (void *ignore)
{
if (!ptid_equal (inferior_ptid, null_ptid))
delete_single_step_breakpoints (inferior_thread ());
normal_stop ();
}
That whole function was removed by d930703d68 mainly to eliminate
the normal_stop call:
~~~~
Note that the exception called from within resume ends up calling
normal_stop via resume_cleanups. That's very borked though, because
normal_stop is going to re-handle whatever was the last reported
event, possibly even re-running a hook stop...
~~~~
But as the regression shows, removing resume_cleanups completely went
a bit too far, as the delete_single_step_breakpoints call is still
necessary.
So fix the regression by reinstating the
delete_single_step_breakpoints call on error. However, since we're
trying to eliminate cleanups, restore it in a different form (using
TRY/CATCH).
Tested on x86-64 GNU/Linux both top of master and on top of a series
that implements software single-step on x86.
gdb/ChangeLog:
2018-01-11 Pedro Alves <palves@redhat.com>
PR gdb/22583
* infrun.c (resume): Rename to ...
(resume_1): ... this.
(resume): Reimplement as wrapper around resume_1.
At <https://sourceware.org/ml/gdb-patches/2017-12/msg00298.html>, Joel
wrote:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Consider the following code which first declares a tagged type (the
equivalent of a class in Ada), and then a procedure which takes a
pointer (access) to this type's 'Class.
package Pck is
type Top_T is tagged record
N : Integer := 1;
end record;
procedure Inspect (Obj: access Top_T'Class);
end Pck;
Putting a breakpoint in that procedure and then running to it triggers
an internal error:
(gdb) break inspect
(gdb) continue
Breakpoint 1, pck.inspect (obj=0x63e010
/[...]/gdb/stack.c:621: internal-error: void print_frame_args(symbol*, frame_info*, int, ui_file*): Assertion `nsym != NULL' failed.
What's special about this subprogram is that it takes an access to
what we call a 'Class type, and for implementation reasons, the
compiler adds an extra argument named "objL". If you are curious why,
it allows the compiler for perform dynamic accessibility checks that
are mandated by the language.
If we look at the location where we get the internal error (in
stack.c), we find that we are looping over the symbol of each
parameter, and for each parameter, we do:
/* We have to look up the symbol because arguments can have
two entries (one a parameter, one a local) and the one we
want is the local, which lookup_symbol will find for us.
[...]
nsym = lookup_symbol (SYMBOL_LINKAGE_NAME (sym),
b, VAR_DOMAIN, NULL).symbol;
gdb_assert (nsym != NULL);
The lookup_symbol goes through the lookup structure, which means the
symbol's linkage name ("objL") gets transformed into a
lookup_name_info object (in block_lookup_symbol), before it gets fed
to the block symbol dictionary iterators. This, in turn, triggers the
symbol matching by comparing the "lookup" name which, for Ada, means
among other things, lowercasing the given name to "objl". It is this
transformation that causes the lookup find no matches, and therefore
trip this assertion.
Going back to the "offending" call to lookup_symbol in stack.c, what
we are trying to do, here, is do a lookup by linkage name. So, I
think what we mean to be doing is a completely literal symbol lookup,
so maybe not even strcmp_iw, but actually just plain strcmp???
In the past, in practice, you could get that effect by doing a lookup
using the C language. But that doesn't work, because we still end up
somehow using Ada's lookup_name routine which transforms "objL".
So, ideally, as I hinted before, I think what we need is a way to
perform a literal lookup so that searches by linkage names like the
above can be performed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This commit fixes the problem by implementing something similar to
Joel's literal idea, but with some important differences.
I considered adding a symbol_name_match_type::LINKAGE and supporting
searching by linkage name for any language, but the problem with that
is that the dictionaries only work with SYMBOL_SEARCH_NAME, because
that's what is used for hashing. We'd need separate dictionaries for
hashed linkage names.
So with the current symbol tables infrastructure, it's not literal
linkage names that we want to pass down, but instead literal _search_
names (SYMBOL_SEARCH_NAME, etc.).
However, psymbols have no overload/function parameter info in C++, so
a straight strcmp doesn't work properly for C++ name matching.
So what we do is be a little less aggressive then and add a new
symbol_name_match_type::SEARCH_SYMBOL instead that takes as input a
non-user-input search symbol, and then we skip any decoding/demangling
steps and make:
- Ada treat that as a verbatim match,
- other languages treat it as symbol_name_match_type::FULL.
This also fixes the new '"maint check-psymtabs" for Ada' testcase for
me (gdb.ada/maint_with_ada.exp). I've not removed the kfail yet
because Joel still sees that testcase failing with this patch.
That'll be fixed in follow up patches.
gdb/ChangeLog:
2018-01-05 Pedro Alves <palves@redhat.com>
PR gdb/22670
* ada-lang.c (literal_symbol_name_matcher): New function.
(ada_get_symbol_name_matcher): Use it for
symbol_name_match_type::SEARCH_NAME.
* block.c (block_lookup_symbol): New parameter 'match_type'. Pass
it down instead of assuming symbol_name_match_type::FULL.
* block.h (block_lookup_symbol): New parameter 'match_type'.
* c-valprint.c (print_unpacked_pointer): Use
lookup_symbol_search_name instead of lookup_symbol.
* compile/compile-object-load.c (get_out_value_type): Pass down
symbol_name_match_type::SEARCH_NAME.
* cp-namespace.c (cp_basic_lookup_symbol): Pass down
symbol_name_match_type::FULL.
* cp-support.c (cp_get_symbol_name_matcher): Handle
symbol_name_match_type::SEARCH_NAME.
* infrun.c (insert_exception_resume_breakpoint): Use
lookup_symbol_search_name.
* p-valprint.c (pascal_val_print): Use lookup_symbol_search_name.
* psymtab.c (maintenance_check_psymtabs): Use
symbol_name_match_type::SEARCH_NAME and SYMBOL_SEARCH_NAME.
* stack.c (print_frame_args): Use lookup_symbol_search_name and
SYMBOL_SEARCH_NAME.
* symtab.c (lookup_local_symbol): Don't demangle the lookup name
if symbol_name_match_type::SEARCH_NAME.
(lookup_symbol_in_language): Pass down
symbol_name_match_type::FULL.
(lookup_symbol_search_name): New.
(lookup_language_this): Pass down
symbol_name_match_type::SEARCH_NAME.
(lookup_symbol_aux, lookup_local_symbol): New parameter
'match_type'. Pass it down.
* symtab.h (symbol_name_match_type::SEARCH_NAME): New enumerator.
(lookup_symbol_search_name): New declaration.
(lookup_symbol_in_block): New 'match_type' parameter.
gdb/testsuite/ChangeLog:
2018-01-05 Joel Brobecker <brobecker@adacore.com>
PR gdb/22670
* gdb.ada/access_tagged_param.exp: New file.
* gdb.ada/access_tagged_param/foo.adb: New file.
This patch converts the generic probe interface (gdb/probe.[ch]) to
C++, and also performs some cleanups that were on my TODO list for a
while.
The main changes were the conversion of 'struct probe' to 'class
probe', and 'struct probe_ops' to 'class static_probe_ops'. The
former now contains all the "dynamic", generic methods that act on a
probe + the generic data related to it; the latter encapsulates a
bunch of "static" methods that relate to the probe type, but not to a
specific probe itself.
I've had to do a few renamings (e.g., on 'struct bound_probe' the
field is called 'probe *prob' now, instead of 'struct probe *probe')
because GCC was complaining about naming the field using the same name
as the class. Nothing major, though. Generally speaking, the logic
behind and the design behind the code are the same.
Even though I'm sending a series of patches, they need to be tested
and committed as a single unit, because of inter-dependencies. But it
should be easier to review in separate logical units.
I've regtested this patch on BuildBot, no regressions found.
gdb/ChangeLog:
2017-11-22 Sergio Durigan Junior <sergiodj@redhat.com>
* break-catch-throw.c (fetch_probe_arguments): Use
'probe.prob' instead of 'probe.probe'.
* breakpoint.c (create_longjmp_master_breakpoint): Call
'can_evaluate_arguments' and 'get_relocated_address' methods
from probe.
(create_exception_master_breakpoint): Likewise.
(add_location_to_breakpoint): Use 'sal->prob' instead of
'sal->probe'.
(bkpt_probe_insert_location): Call 'set_semaphore' method from
probe.
(bkpt_probe_remove_location): Likewise, for 'clear_semaphore'.
* elfread.c (elf_get_probes): Use 'static_probe_ops' instead
of 'probe_ops'.
(probe_key_free): Call 'delete' on probe.
(check_exception_resume): Use 'probe.prob' instead of
'probe.probe'.
* location.c (string_to_event_location_basic): Call
'probe_linespec_to_static_ops'.
* probe.c (class any_static_probe_ops): New class.
(any_static_probe_ops any_static_probe_ops): New variable.
(parse_probes_in_pspace): Receive 'static_probe_ops' as
argument. Adjust code to reflect change.
(parse_probes): Use 'static_probe_ops' instead of
'probe_ops'. Adjust code to reflect change.
(find_probes_in_objfile): Call methods to get name and
provider from probe.
(find_probe_by_pc): Use 'result.prob' instead of
'result.probe'. Call 'get_relocated_address' method from
probe.
(collect_probes): Adjust comment and argument list to receive
'static_probe_ops' instead of 'probe_ops'. Adjust code to
reflect change. Call necessary methods from probe.
(compare_probes): Call methods to get name and provider from
probes.
(gen_ui_out_table_header_info): Receive 'static_probe_ops'
instead of 'probe_ops'. Use 'std::vector' instead of VEC,
adjust code accordingly.
(print_ui_out_not_applicables): Likewise.
(info_probes_for_ops): Rename to...
(info_probes_for_spops): ...this. Receive 'static_probe_ops'
as argument instead of 'probe_ops'. Adjust code. Call
necessary methods from probe.
(info_probes_command): Use 'info_probes_for_spops'.
(enable_probes_command): Pass correct argument to
'collect_probes'. Call methods from probe.
(disable_probes_command): Likewise.
(get_probe_address): Move to 'any_static_probe_ops::get_address'.
(get_probe_argument_count): Move to
'any_static_probe_ops::get_argument_count'.
(can_evaluate_probe_arguments): Move to
'any_static_probe_ops::can_evaluate_arguments'.
(evaluate_probe_argument): Move to
'any_static_probe_ops::evaluate_argument'.
(probe_safe_evaluate_at_pc): Use 'probe.prob' instead of
'probe.probe'.
(probe_linespec_to_ops): Rename to...
(probe_linespec_to_static_ops): ...this. Adjust code.
(probe_any_is_linespec): Rename to...
(any_static_probe_ops::is_linespec): ...this.
(probe_any_get_probes): Rename to...
(any_static_probe_ops::get_probes): ...this.
(any_static_probe_ops::type_name): New method.
(any_static_probe_ops::gen_info_probes_table_header): New
method.
(compute_probe_arg): Use 'pc_probe.prob' instead of
'pc_probe.probe'. Call methods from probe.
(compile_probe_arg): Likewise.
(std::vector<const probe_ops *> all_probe_ops): Delete.
(std::vector<const static_probe_ops *> all_static_probe_ops):
New variable.
(_initialize_probe): Use 'all_static_probe_ops' instead of
'all_probe_ops'.
* probe.h (struct info_probe_column) <field_name>: Delete
extraneous newline
(info_probe_column_s): Delete type and VEC.
(struct probe_ops): Delete. Replace with...
(class static_probe_ops): ...this and...
(clas probe): ...this.
(struct bound_probe) <bound_probe>: Delete extraneous
newline. Adjust constructor to receive 'probe' instead of
'struct probe'.
<probe>: Rename to...
<prob>: ...this. Delete extraneous newline.
<objfile>: Delete extraneous newline.
(register_probe_ops): Delete unused prototype.
(info_probes_for_ops): Rename to...
(info_probes_for_spops): ...this. Adjust comment.
(get_probe_address): Move to 'probe::get_address'.
(get_probe_argument_count): Move to
'probe::get_argument_count'.
(can_evaluate_probe_arguments): Move to
'probe::can_evaluate_arguments'.
(evaluate_probe_argument): Move to 'probe::evaluate_argument'.
* solib-svr4.c (struct svr4_info): Adjust comment.
(struct probe_and_action) <probe>: Rename to...
<prob>: ...this.
(register_solib_event_probe): Receive 'probe' instead of
'struct probe' as argument. Use 'prob' instead of 'probe'
when applicable.
(solib_event_probe_action): Call 'get_argument_count' method
from probe. Adjust comment.
(svr4_handle_solib_event): Adjust comment. Call
'evaluate_argument' method from probe.
(svr4_create_probe_breakpoints): Call 'get_relocated_address'
from probe.
(svr4_create_solib_event_breakpoints): Use 'probe' instead of
'struct probe'. Call 'can_evaluate_arguments' from probe.
* symfile.h: Forward declare 'class probe' instead of 'struct
probe'.
* symtab.h: Likewise.
(struct symtab_and_line) <probe>: Rename to...
<prob>: ...this.
* tracepoint.c (start_tracing): Use 'prob' when applicable.
Call probe methods.
(stop_tracing): Likewise.
If you have a breakpoint command that re-resumes the target, like:
break foo
commands
> c
> end
and then let the inferior run, hitting the breakpoint, and then press
Ctrl-C at just the right time, between GDB processing the stop at
"foo", and re-resuming the target, you'll hit the QUIT call in
infrun.c:resume.
With this hack, we can reproduce the bad case consistently:
--- a/gdb/inf-loop.c
+++ b/gdb/inf-loop.c
@@ -31,6 +31,8 @@
#include "top.h"
#include "observer.h"
+bool continue_hack;
+
/* General function to handle events in the inferior. */
void
@@ -64,6 +66,8 @@ inferior_event_handler (enum inferior_event_type event_type,
{
check_frame_language_change ();
+ continue_hack = true;
+
/* Don't propagate breakpoint commands errors. Either we're
stopping or some command resumes the inferior. The user will
be informed. */
diff --git a/gdb/infrun.c b/gdb/infrun.c
index d425664..c74b14c 100644
--- a/gdb/infrun.c
+++ b/gdb/infrun.c
@@ -2403,6 +2403,10 @@ resume (enum gdb_signal sig)
gdb_assert (!tp->stop_requested);
gdb_assert (!thread_is_in_step_over_chain (tp));
+ extern bool continue_hack;
+
+ if (continue_hack)
+ set_quit_flag ();
QUIT;
The GDB backtrace looks like this:
(top-gdb) bt
...
#3 0x0000000000612e8b in throw_quit(char const*, ...) (fmt=0xaf84a1 "Quit") at src/gdb/common/common-exceptions.c:408
#4 0x00000000007fc104 in quit() () at src/gdb/utils.c:748
#5 0x00000000006a79d2 in default_quit_handler() () at src/gdb/event-top.c:954
#6 0x00000000007fc134 in maybe_quit() () at src/gdb/utils.c:762
#7 0x00000000006f66a3 in resume(gdb_signal) (sig=GDB_SIGNAL_0) at src/gdb/infrun.c:2406
#8 0x0000000000700c3d in keep_going_pass_signal(execution_control_state*) (ecs=0x7ffcf3744e60) at src/gdb/infrun.c:7793
#9 0x00000000006f5fcd in start_step_over() () at src/gdb/infrun.c:2145
#10 0x00000000006f7b1f in proceed(unsigned long, gdb_signal) (addr=18446744073709551615, siggnal=GDB_SIGNAL_DEFAULT)
at src/gdb/infrun.c:3135
#11 0x00000000006ebdd4 in continue_1(int) (all_threads=0) at src/gdb/infcmd.c:842
#12 0x00000000006ec097 in continue_command(char*, int) (args=0x0, from_tty=0) at src/gdb/infcmd.c:938
#13 0x00000000004b5140 in do_cfunc(cmd_list_element*, char*, int) (c=0x2d18570, args=0x0, from_tty=0)
at src/gdb/cli/cli-decode.c:106
#14 0x00000000004b8219 in cmd_func(cmd_list_element*, char*, int) (cmd=0x2d18570, args=0x0, from_tty=0)
at src/gdb/cli/cli-decode.c:1952
#15 0x00000000007f1532 in execute_command(char*, int) (p=0x7ffcf37452b1 "", from_tty=0) at src/gdb/top.c:608
#16 0x00000000004bd127 in execute_control_command(command_line*) (cmd=0x3a88ef0) at src/gdb/cli/cli-script.c:485
#17 0x00000000005cae0c in bpstat_do_actions_1(bpstat*) (bsp=0x37edcf0) at src/gdb/breakpoint.c:4513
#18 0x00000000005caf67 in bpstat_do_actions() () at src/gdb/breakpoint.c:4563
#19 0x00000000006e8798 in inferior_event_handler(inferior_event_type, void*) (event_type=INF_EXEC_COMPLETE, client_data=0x0)
at src/gdb/inf-loop.c:72
#20 0x00000000006f9447 in fetch_inferior_event(void*) (client_data=0x0) at src/gdb/infrun.c:3970
#21 0x00000000006e870e in inferior_event_handler(inferior_event_type, void*) (event_type=INF_REG_EVENT, client_data=0x0)
at src/gdb/inf-loop.c:43
#22 0x0000000000494d58 in remote_async_serial_handler(serial*, void*) (scb=0x3585ca0, context=0x2cd1b80)
at src/gdb/remote.c:13820
#23 0x000000000044d682 in run_async_handler_and_reschedule(serial*) (scb=0x3585ca0) at src/gdb/ser-base.c:137
#24 0x000000000044d767 in fd_event(int, void*) (error=0, context=0x3585ca0) at src/gdb/ser-base.c:188
#25 0x00000000006a5686 in handle_file_event(file_handler*, int) (file_ptr=0x45997d0, ready_mask=1)
at src/gdb/event-loop.c:733
#26 0x00000000006a5c29 in gdb_wait_for_event(int) (block=1) at src/gdb/event-loop.c:859
#27 0x00000000006a4aa6 in gdb_do_one_event() () at src/gdb/event-loop.c:347
#28 0x00000000006a4ade in start_event_loop() () at src/gdb/event-loop.c:371
and when that happens, you end up with GDB's run control in quite a
messed up state. Something like this:
thread_function1 (arg=0x1) at threads.c:107
107 usleep (SLEEP); /* Loop increment. */
Quit
(gdb) c
Continuing.
** nothing happens, time passes..., press ctrl-c again **
^CQuit
(gdb) info threads
Id Target Id Frame
1 Thread 1462.1462 "threads" (running)
* 2 Thread 1462.1466 "threads" (running)
3 Thread 1462.1465 "function0" (running)
(gdb) c
Cannot execute this command while the selected thread is running.
(gdb)
The first "Quit" above is thrown from within "resume", and cancels run
control while GDB is in the middle of stepping over a breakpoint.
with step_over_info_valid_p() true. The next "c" didn't actually
resume anything, because GDB throught that the step-over was still in
progress. It wasn't, because the thread that was supposed to be
stepping over the breakpoint wasn't actually resumed.
So at this point, we press Ctrl-C again, and this time, the default
quit handler is called directly from the event loop
(event-top.c:default_quit_handler -> quit()), because gdb was left
owning the terminal (because the previous resume was cancelled before
we reach target_resume -> target_terminal::inferior()).
Note that the exception called from within resume ends up calling
normal_stop via resume_cleanups. That's very borked though, because
normal_stop is going to re-handle whatever was the last reported
event, possibly even re-running a hook stop... I think that the only
sane way to safely cancel the run control state machinery is to push
an event via handle_inferior_event like all other events.
The fix here does two things, and either alone would fix the problem
at hand:
#1 - passes the terminal to the inferior earlier, so that any QUIT
call from the point we declare the target as running goes to the
inferior directly, protecting run control from unsafe QUIT calls.
#2 - gets rid of this QUIT call in resume and of its related unsafe
resume_cleanups.
Aboout #2, the comment describing resume says:
/* Resume the inferior, but allow a QUIT. This is useful if the user
wants to interrupt some lengthy single-stepping operation
(for child processes, the SIGINT goes to the inferior, and so
we get a SIGINT random_signal, but for remote debugging and perhaps
other targets, that's not true).
but that's a really old comment that predates a lot of fixes to Ctrl-C
handling throughout both GDB core and the remote target, that made
sure that a Ctrl-C isn't ever lost. In any case, if some target
depended on this, a much better fix would be to make the target return
a SIGINT stop out of target_wait the next time that is called.
This was exposed by the new gdb.base/bp-cmds-continue-ctrl-c.exp
testcase added later in the series.
gdb/ChangeLog:
2017-11-16 Pedro Alves <palves@redhat.com>
* infrun.c (resume_cleanups): Delete.
(resume): No longer install a resume_cleanups cleanup nor call
QUIT.
(proceed): Pass the terminal to the inferior.
(keep_going_pass_signal): No longer install a resume_cleanups
cleanup.
This introduces gdb_breakpoint_up, a unique_ptr typedef that owns a
breakpoint. It then changes set_momentary_breakpoint to return a
gdb_breakpoint_up and fixes up the fallout. This then allows the
removal of make_cleanup_delete_breakpoint.
Once breakpoints are fully C++-ified, this typedef can be removed in
favor of a plain std::unique_ptr.
gdb/ChangeLog
2017-11-04 Tom Tromey <tom@tromey.com>
* breakpoint.c (set_momentary_breakpoint): Return
breakpoint_up.
(until_break_command): Update.
(new_until_break_fsm): Change argument types to
breakpoint_up.
(set_momentary_breakpoint_at_pc): Return breakpoint_up.
(do_delete_breakpoint_cleanup, make_cleanup_delete_breakpoint):
Remove.
* infcmd.c (finish_forward): Update.
* breakpoint.h (set_momentary_breakpoint)
(set_momentary_breakpoint_at_pc): Return breakpoint_up.
(make_cleanup_delete_breakpoint): Remove.
(struct breakpoint_deleter): New.
(breakpoint_up): New typedef.
* infrun.c (insert_step_resume_breakpoint_at_sal_1): Update.
(insert_exception_resume_breakpoint): Update.
(insert_exception_resume_from_probe): Update.
(insert_longjmp_resume_breakpoint): Update.
* arm-linux-tdep.c (arm_linux_copy_svc): Update.
* elfread.c (elf_gnu_ifunc_resolver_stop): Update.
* infcall.c (call_function_by_hand_dummy): Update
displaced_step_closure is a type defined in multiple -tdep.c files.
Trying to xfree it from the common code (infrun.c) is a problem when we
try to poison xfree for non-POD types. Because there can be multiple of
these types in the same build, this patch makes a hierarchy of classes
with a virtual destructor. When the common code deletes the object
through a displaced_step_closure pointer, it will invoke the right
destructor.
The amd64 used a last-member array with a variable size. That doesn't
work with new, so I changed it for an std::vector. Other architectures
which used a simple byte buffer as a closure now use a shared
buf_displaced_step_closure, a closure type that only contains a
gdb::byte_vector.
Reg-tested on the buildbot.
gdb/ChangeLog:
* infrun.h: Include common/byte-vector.h.
(struct displaced_step_closure): New struct.
(struct buf_displaced_step_closure): New struct.
* infrun.c (displaced_step_closure::~displaced_step_closure):
Provide default implementation.
(displaced_step_clear): Deallocate step closure with delete.
* aarch64-tdep.c (displaced_step_closure): Rename to ...
(aarch64_displaced_step_closure): ... this, extend
displaced_step_closure.
(aarch64_displaced_step_data) <dsc>: Change type to
aarch64_displaced_step_closure.
(aarch64_displaced_step_copy_insn): Adjust to type change, use
unique_ptr.
(aarch64_displaced_step_fixup): Add cast for displaced step
closure.
* amd64-tdep.c (displaced_step_closure): Rename to ...
(amd64_displaced_step_closure): ... this, extend
displaced_step_closure.
<insn_buf>: Change type to std::vector<gdb_byte>.
<max_len>: Remove.
(fixup_riprel): Change type of DSC parameter, adjust to type
change of insn_buf.
(fixup_displaced_copy): Change type of DSC parameter.
(amd64_displaced_step_copy_insn): Instantiate
amd64_displaced_step_closure.
(amd64_displaced_step_fixup): Add cast for closure type, adjust
to type change of insn_buf.
* arm-linux-tdep.c (arm_linux_cleanup_svc): Change type of
parameter DSC.
(arm_linux_copy_svc): Likewise.
(cleanup_kernel_helper_return): Likewise.
(arm_catch_kernel_helper_return): Likewise.
(arm_linux_displaced_step_copy_insn): Instantiate
arm_displaced_step_closure.
* arm-tdep.c (arm_pc_is_thumb): Add cast for closure.
(displaced_read_reg): Change type of parameter DSC.
(branch_write_pc): Likewise.
(load_write_pc): Likewise.
(alu_write_pc): Likewise.
(displaced_write_reg): Likewise.
(arm_copy_unmodified): Likewise.
(thumb_copy_unmodified_32bit): Likewise.
(thumb_copy_unmodified_16bit): Likewise.
(cleanup_preload): Likewise.
(install_preload): Likewise.
(arm_copy_preload): Likewise.
(thumb2_copy_preload): Likewise.
(install_preload_reg): Likewise.
(arm_copy_preload_reg): Likewise.
(cleanup_copro_load_store): Likewise.
(install_copro_load_store): Likewise.
(arm_copy_copro_load_store) Likewise.
(thumb2_copy_copro_load_store): Likewise.
(cleanup_branch): Likewise.
(install_b_bl_blx): Likewise.
(arm_copy_b_bl_blx): Likewise.
(thumb2_copy_b_bl_blx): Likewise.
(thumb_copy_b): Likewise.
(install_bx_blx_reg): Likewise.
(arm_copy_bx_blx_reg): Likewise.
(thumb_copy_bx_blx_reg): Likewise.
(cleanup_alu_imm): Likewise.
(arm_copy_alu_imm): Likewise.
(thumb2_copy_alu_imm): Likewise.
(cleanup_alu_reg): Likewise.
(install_alu_reg): Likewise.
(arm_copy_alu_reg): Likewise.
(thumb_copy_alu_reg): Likewise.
(cleanup_alu_shifted_reg): Likewise.
(install_alu_shifted_reg): Likewise.
(arm_copy_alu_shifted_reg): Likewise.
(cleanup_load): Likewise.
(cleanup_store): Likewise.
(arm_copy_extra_ld_st): Likewise.
(install_load_store): Likewise.
(thumb2_copy_load_literal): Likewise.
(thumb2_copy_load_reg_imm): Likewise.
(arm_copy_ldr_str_ldrb_strb): Likewise.
(cleanup_block_load_all): Likewise.
(cleanup_block_store_pc): Likewise.
(cleanup_block_load_pc): Likewise.
(arm_copy_block_xfer): Likewise.
(thumb2_copy_block_xfer): Likewise.
(cleanup_svc): Likewise.
(install_svc): Likewise.
(arm_copy_svc): Likewise.
(thumb_copy_svc): Likewise.
(arm_copy_undef): Likewise.
(thumb_32bit_copy_undef): Likewise.
(arm_copy_unpred): Likewise.
(arm_decode_misc_memhint_neon): Likewise.
(arm_decode_unconditional): Likewise.
(arm_decode_miscellaneous): Likewise.
(arm_decode_dp_misc): Likewise.
(arm_decode_ld_st_word_ubyte): Likewise.
(arm_decode_media): Likewise.
(arm_decode_b_bl_ldmstm): Likewise.
(arm_decode_ext_reg_ld_st): Likewise.
(thumb2_decode_dp_shift_reg): Likewise.
(thumb2_decode_ext_reg_ld_st): Likewise.
(arm_decode_svc_copro): Likewise.
(thumb2_decode_svc_copro): Likewise.
(install_pc_relative): Likewise.
(thumb_copy_pc_relative_16bit): Likewise.
(thumb_decode_pc_relative_16bit): Likewise.
(thumb_copy_pc_relative_32bit): Likewise.
(thumb_copy_16bit_ldr_literal): Likewise.
(thumb_copy_cbnz_cbz): Likewise.
(thumb2_copy_table_branch): Likewise.
(cleanup_pop_pc_16bit_all): Likewise.
(thumb_copy_pop_pc_16bit): Likewise.
(thumb_process_displaced_16bit_insn): Likewise.
(decode_thumb_32bit_ld_mem_hints): Likewise.
(thumb_process_displaced_32bit_insn): Likewise.
(thumb_process_displaced_insn): Likewise.
(arm_process_displaced_insn): Likewise.
(arm_displaced_init_closure): Likewise.
(arm_displaced_step_fixup): Add cast for closure.
* arm-tdep.h: Include infrun.h.
(displaced_step_closure): Rename to ...
(arm_displaced_step_closure): ... this, extend
displaced_step_closure.
<u::svc::copy_svc_os>: Change type of parameter DSC.
<cleanup>: Likewise.
(arm_process_displaced_insn): Likewise.
(arm_displaced_init_closure): Likewise.
(displaced_read_reg): Likewise.
(displaced_write_reg): Likewise.
* i386-linux-tdep.c (i386_linux_displaced_step_copy_insn):
Adjust.
* i386-tdep.h: Include infrun.h.
(i386_displaced_step_closure): New typedef.
* i386-tdep.c (i386_displaced_step_copy_insn): Use
i386_displaced_step_closure.
(i386_displaced_step_fixup): Adjust.
* rs6000-tdep.c (ppc_displaced_step_closure): New typedef.
(ppc_displaced_step_copy_insn): Use ppc_displaced_step_closure
and unique_ptr.
(ppc_displaced_step_fixup): Adjust.
* s390-linux-tdep.c (s390_displaced_step_closure): New typedef.
(s390_displaced_step_copy_insn): Use s390_displaced_step_closure
and unique_ptr.
(s390_displaced_step_fixup): Adjust.
If you want to use catch_errors with a function with parameters, then
currently you have to manually write a "capture" struct wrapping the
arguments and marshall/unmarshall that.
https://sourceware.org/ml/gdb-patches/2017-09/msg00834.html proposed
adjusting catch_errors to use gdb::function_view, which would allow
passing lambdas with automatic captures. However, it seems like using
TRY/CATCH directly instead ends up producing clearer and easier to
debug code. This is what this commit does.
Note that removing catch_errors exposes further cleanup opportunities
around no longer having to follow catch_errors callback type, and also
removes a few cleanups.
I didn't do anything to save/restore current_uiout because I think
that should be the responsibility of the code that changes
current_uiout in the first place.
(Another approach could be to make catch_errors a variadic template
like:
template<typename Function, typename... Args>
int catch_errors (const char *errstring, return_mask mask,
Function &&func, Args... args);
and then with:
extern void function_with_args (int, int);
extern void function_with_no_args ();
calls to the above functions would be wrapped like this:
catch_errors ("some error happened", RETURN_MASK_ERROR,
function_with_args, arg1, arg2);
catch_errors ("some error happened", RETURN_MASK_ERROR,
function_with_no_args);
but I'm thinking that that doesn't improve much if at all either.)
gdb/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* breakpoint.c (breakpoint_cond_eval): Change return type to bool
and reverse logic.
(WP_DELETED, WP_VALUE_CHANGED, WP_VALUE_NOT_CHANGED, WP_IGNORE):
No longer macros. Instead ...
(enum wp_check_result): They're now values of this new
enumeration.
(watchpoint_check): Change return type to wp_check_result and
parameter type to bpstat.
(bpstat_check_watchpoint): Use TRY/CATCH instead of catch_errors.
(bpstat_check_breakpoint_conditions): Use TRY/CATCH instead of
catch_errors. Reverse logic of watchpoint_check call.
(breakpoint_re_set_one): Now returns void and takes a breakpoint
pointer as parameter.
(breakpoint_re_set): Use TRY/CATCH instead of catch_errors.
* common/common-exceptions.c (throw_exception_sjlj): Update
comments to avoid mentioning catch_errors.
* exceptions.c (catch_errors): Delete.
* exceptions.h: Update comments to avoid mentioning catch_errors.
(catch_errors_ftype, catch_errors): Delete.
* infrun.c (normal_stop): Use TRY/CATCH instead of catch_errors.
(hook_stop_stub): Delete.
(restore_selected_frame): Change return type to void, and
parameter type to const frame_id &.
(restore_infcall_control_state): Use TRY/CATCH instead of
catch_errors.
* main.c (captured_command_loop): Return void and remove
parameter. Remove references to catch_errors.
(captured_main): Use TRY/CATCH instead of catch_errors.
* objc-lang.c (objc_submethod_helper_data)
(find_objc_msgcall_submethod_helper): Delete.
(find_objc_msgcall_submethod): Use TRY/CATCH instead of
catch_errors.
* record-full.c (record_full_message): Return void.
(record_full_message_args, record_full_message_wrapper): Delete.
(record_full_message_wrapper_safe): Return bool and use TRY/CATCH
instead of catch_errors.
* solib-aix.c (solib_aix_open_symbol_file_object): Change
parameter type to int.
* solib-darwin.c (open_symbol_file_object): Ditto.
* solib-dsbt.c (open_symbol_file_object): Ditto.
* solib-frv.c (open_symbol_file_object): Ditto.
* solib-svr4.c (open_symbol_file_object): Ditto.
* solib-target.c (solib_target_open_symbol_file_object): Ditto.
* solib.c (update_solib_list): Use TRY/CATCH instead of
catch_errors.
* solist.h (struct target_so_ops) <open_symbol_file_object>:
Change type.
* symmisc.c (struct print_symbol_args): Remove.
(dump_symtab_1): Use TRY/CATCH instead of catch_errors.
(print_symbol): Change type.
* windows-nat.c (handle_load_dll, handle_unload_dll): Return void
and remove parameters.
(catch_errors): New.
(get_windows_debug_event): Adjust.
gdb/testsuite/ChangeLog:
2017-10-10 Pedro Alves <palves@redhat.com>
* lib/selftest-support.exp (selftest_setup): Update for
captured_command_loop's prototype change.
As mentioned in commit bf93d7ba99 ("Add thread after updating
gdbarch when exec'ing"), we should avoid doing register reads after a
process does an exec and before we've updated that inferior's gdbarch.
Otherwise, we may interpret the registers using the wrong
architecture.
There's still (at least) one case where we still read registers
post-exec with the pre-exec architecture. That's when infrun decides
it needs to switch context to the exec'ing thread. I.e., if the exec
event is processed at a time when the current thread is not already
the exec'ing thread, then we get (with the test added by this commit):
continue
Continuing.
Truncated register 50 in remote 'g' packet
Truncated register 50 in remote 'g' packet
(gdb) FAIL: gdb.multi/multi-arch-exec.exp: selected_thread=2: follow_exec_mode=same: continue across exec that changes architecture
The fix is to avoid reading registers when switching context in this
case.
(I'd be nice to get rid of the constant stop_pc reading when switching
threads, but that'd be a deeper change.)
gdb/ChangeLog:
2017-10-09 Pedro Alves <palves@redhat.com>
* infrun.c (handle_inferior_event_1) <TARGET_WAITKIND_EXECD>: Skip
reading registers when switching context.
gdb/testsuite/ChangeLog:
2017-10-09 Pedro Alves <palves@redhat.com>
* gdb.multi/multi-arch-exec.c: Include <pthread.h> and <assert.h>.
(barrier): New.
(thread_start, all_started): New functions.
(main): Spawn new thread and wait until it is scheduled.
* gdb.multi/multi-arch-exec.exp: Build $srcfile1 with the pthreads
option.
(do_test): Add 'selected_thread' parameter. Run to all_started
instead of main. Explicitly set the breakpoint at main. Switch
to the SELECTED_THREAD thread.
(top level): Test handling the exec event with either the main
thread or the second thread selected.
This changes record_full_gdb_operation_disable_set to return a
scoped_restore rather than a cleanup, and fixes all the users.
ChangeLog
2017-10-03 Tom Tromey <tom@tromey.com>
* record-full.h (record_full_gdb_operation_disable_set): Return
scoped_restore_tmpl<int>.
* infrun.c (adjust_pc_after_break): Update.
(handle_signal_stop): Update.
* record-full.c (record_full_gdb_operation_disable_set): Return
scoped_restore_tmpl<int>.
(record_full_wait_1, record_full_insert_breakpoint)
(record_full_remove_breakpoint, record_full_save)
(record_full_goto_insn): Update.
This removes make_cleanup_defer_target_commit_resume in favor of using
scoped_restore.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* target.h (make_scoped_defer_target_commit_resume): Update.
* target.c (make_scoped_defer_target_commit_resume): Rename from
make_cleanup_defer_target_commit_resume. Return a
scoped_restore.
* infrun.c (proceed): Use make_scoped_defer_target_commit_resume.
As mentioned in the previous patch, we should avoid doing register reads
after a process does an exec and before we've updated that inferior's
gdbarch. Otherwise, we may interpret the registers using the wrong
architecture. When a process does an exec with "follow-exec-mode new",
a new inferior is added by follow_exec. The gdbarch of that new
inferior is at first set to some default value, probably specific to the
gdb build (I get "i386" here), which may not be the right one. It is
updated later by the call to target_find_description. Before that
point, if we try to read the inferior's registers, we may not interpret
them correctly. This has been exposed by a failure in
gdb.base/foll-exec-mode.exp after the previous patch, with:
Remote 'g' packet reply is too long (expected 312 bytes, got 816 bytes)
The call to "add_thread" done just after adding the inferior is
problematic, because it ends up reading the registers (because the ptid
is re-used, we end up doing a switch_to_thread to it, which tries to
update stop_pc). The registers returned by gdbserver are the x86-64
ones, while we try to interpret them using the "i386" gdbarch.
Postponing the call to add_thread to until the target
description/gdbarch has been updated seems to fix the issue.
As to why this issue was uncovered by the previous patch: what I think
happened before that patch is that since we were updating stop_pc before
switching to the new inferior, we were filling the regcache associated
to the ptid (this worked fine as long as the architectures of the
previous and new process images were the same). The call to
switch_to_thread then worked, because the register read hit the
regcache. Now, it triggers a register read, while the gdbarch is not
set correctly, leading to the "reply is too long" error. If this is
right, it sounds wrong that we delete and re-add a thread with the same
ptid, and are able to access the registers from the deleted thread.
When we delete a thread, should we clear the regcache associated to that
ptid, so that the new thread starts with a fresh/empty regcache?
gdb/ChangeLog:
* infrun.c (follow_exec): Call add_thread after
target_find_description.
When an inferior execs and changes architecture (e.g. 64 bits to 32
bits), the gdbarch associated to the inferior is updated by the
follow_exec call in handle_inferior_event_1. We should avoid doing any
register read before that point, because the registers sent by the
remote side will be those of the new architecture, but we would
interpret them using the old architecture. We do just that by setting
stop_pc during this window, which obviously requires reading the
registers. This results in gdb.multi/multi-arch-exec.exp failing, GDB
outputting the following error:
Truncated register 50 in remote 'g' packet
This patch fixes that by postponing the setting of stop_pc to after
we've updated the inferior gdbarch.
This bug was hiding another problem, and as such introduces some
failures in gdb.base/foll-exec-mode.exp. The following patch takes care
of that.
gdb/ChangeLog:
* infrun.c (handle_inferior_event_1): When exec'ing, read
stop_pc after follow_exec.
Tom Tromey
Pedro Alves
Andrew Burgess
Keith Seitz
Sergio Durigan Junior
Markus Metzger
Simon Marchi
Yao Qi
Simon Marchi
Andreas Arnez
Joel Brobecker
John Baldwin