instructions. Define MIPS16_ALL_ARGS and MIPS16_ALL_STATICS for
save/restore encoding of the args field.
* mips16-opc.c: Add MIPS16e save/restore opcodes.
* mips-dis.c (print_mips16_insn_arg): Handle printing of 'm'/'M'
codes for save/restore.
* config/tc-mips.c (mips16_ip): Add handling of 'm' and 'M' codes
for the MIPS16e save/restore instructions.
* gas/mips/mips.exp: Run new save/restore tests.
* gas/testsuite/gas/mips/mips16e-save.s: New test for generating
different styles of save/restore instructions.
* gas/testsuite/gas/mips/mips16e-save.d: New.
into jrc/jalrc versions if ISA_MIPS32+ and not doing the swap,
hence avoiding to emit a nop.
* gas/mips/mips.exp: Run new test.
* gas/testsuite/gas/mips/mips16e-jrc.s: New test for converting
jalr/jr to the compact jalrc/jrc instructions.
* gas/testsuite/gas/mips/mips16e-jrc.d: New.
- allowing true forward references (which will always assume the referenced
symbols have at the point of use) through the new .eqv pseudo-op and the
new == operator
- disallowing changing .equiv-generated equates (so that the protection this
provides is both forward and backward)
- snapshotting equates when their value gets changed so that previous uses
don't get affected by the new value.
- allowing expressions in places where absolute expressions (or register
names) are needed which were not completely resolvable at the point of
their definition but which are fully resolvable at the point of use
In addition it fixes PR/288.
(mips_opts): Add -1 to initialize ase_mt.
(file_ase_mt): New variable for -mmt.
(CPU_HAS_MT): New define.
(validate_mips_insn): Add supports for +t, +T, !, $, *, &, g operand
formats.
(mips_ip): Check ase_mt to enable MT instructions.
Handle !, $, *, &, +T, +t, g operand formats.
For "mftc1", "mfthc1", "cftc1", "mttc1", "mtthc1", "cttc1", we allow
odd float registers.
(OPTION_MT, OPTION_NO_MT): New define.
(OPTION_COMPAT_ARCH_BASE): Change because of inserting MT define.
(md_parse_option): Parse OPTION_MT and OPTION_NO_MT.
(mips_after_parse_args): Set ase_mt based on CPU.
(s_mipsset): Handle ".set mt" and ".set nomt".
(mips_elf_final_processing): Remind of adding new flag for MT ASE.
(md_show_usage): Show usage of -mmt and -mno-mt.
* doc/as.texinfo: Document -mmt and -mno-mt options.
* doc/c-mips.texi: Likewise, and document ".set mt" and ".set nomt"
directives.
when the frags are different for the 2 instructions we want to
swap. If the lengths of the 2 instructions are not the same, we
won't do the swap but emit an nop.
(mips_opts): Add -1 to initialize ase_dsp.
(file_ase_dsp): New variable for -mdsp.
(CPU_HAS_DSP): New define.
(validate_mips_insn): Add supports for 3, 4, 5, 6, 7, 8, 9, 0, ', :, @
operand formats.
(mips_ip): Add min_range and max_range for checking singed numbers.
Check ase_dsp to enable DSP instructions.
Handle 3, 4, 5, 6, 7, 8, 9, 0, ', :, @ operand formats.
(OPTION_DSP, OPTION_NO_DSP): New define.
(OPTION_COMPAT_ARCH_BASE): Change because of inserting DSP define.
(md_parse_option): Parse OPTION_DSP and OPTION_NO_DSP.
(mips_after_parse_args): Set ase_dsp based on CPU.
(s_mipsset): Handle ".set dsp" and ".set nodsp".
(mips_elf_final_processing): Remind of adding new flag for DSP ASE.
(md_show_usage): Show usage of -mdsp and -mno-dsp.
* config/tc-mips.c (load_register): Add leading "0x" to the
output of sprintf_vma().
(macro): Likewise.
gas/testsuite/:
* gas/mips/ldstla-32-1.l: Update to handle leading zeroes.
* gas/mips/ldstla-32-mips3-1.l: Likewise.
* config/tc-mips.c (IS_ZEXT_32BIT_NUM): New macro.
(normalize_address_expr): New function to sign-extend address
offsets that fit into 32 bits in 32-bit mode.
(macro_build_ldst_constoffset): Use normalize_address_expr()
instead of a handcoded sequence.
(load_register): Likewise. Report oversized numbers in a useful
way.
(macro) [ld_st, ldd_std]: Reject all oversized offsets, not only
for constant addresses. Report oversized numbers in a useful way.
(mips_ip): Use normalize_address_expr() for addresses.
gas/testsuite/:
* gas/mips/ldstla-32.s: Exclude offsets that are now meant to fail
and include more instructions/offsets that are meant to succeed.
Use $4 instead $3 to avoid register dependencies.
* gas/mips/ldstla-32.d: Update accordingly.
* gas/mips/ldstla-32-shared.d: Likewise.
* gas/mips/ldstla-32-mips3.d: New test based on the above, except
for mips3.
* gas/mips/ldstla-32-mips3-shared.d: Similarly, for PIC.
* gas/mips/ldstla-32-mips3.s: Source for the new tests.
* gas/mips/ldstla-32-1.s: New test for offsets that are meant to
fail.
* gas/mips/ldstla-32-mips3-1.s: Likewise, for mips3.
* gas/mips/ldstla-32-1.l: Stderr output for the new test.
* gas/mips/ldstla-32-mips3-1.l: Likewise.
* gas/mips/mips.exp: Run the new tests.
(MAX_NOPS): Bump to 4.
(mips_fix_vr4130): New variable.
(nops_for_vr4130): New function.
(nops_for_insn): Use MAX_DELAY_NOPS rather than MAX_NOPS. Use
nops_for_vr4130 if working around VR4130 errata.
(OPTION_FIX_VR4130, OPTION_NO_FIX_VR4130): New macros.
(md_longopts): Add -mfix-vr4130 and -mno-fix-vr4130.
(md_parse_option): Handle them.
(md_show_usage): Print them.
* doc/c-mips.texi: Document -mfix-vr4130 and -mno-fix-vr4130.
(history): Resize to 1 + MAX_NOPS.
(fix_vr4120_class): New enumeration.
(vr4120_conflicts): New variable.
(init_vr4120_conflicts): New function.
(md_begin): Call it.
(insn_uses_reg): Constify first argument.
(classify_vr4120_insn, insns_between, nops_for_insn, nops_for_sequence)
(nops_for_insn_or_target): New functions.
(append_insn): Use the new nops_for_* functions instead of inline
delay checks. Generalize prev_nop_frag handling to handle an
arbitrary history length. Insert nops into the history buffer
once the number of nops in prev_nop_frag is fixed.
(emit_delays): Use nops_for_insn instead of inline delay checks.
(nop_insn, mips16_nop_insn): New variables.
(NOP_INSN): New macro.
(insn_length, create_insn, install_insn, move_insn, add_fixed_insn)
(add_relaxed_insn, insert_into_history, emit_nop): New functions.
(md_begin): Initialize nop_insn and mips16_nop_insn.
(append_insn): Use the new emit_nop function to add nops, recording
them in the history buffer. Use add_fixed_insn or add_relaxed_insn
to reserve room for the instruction and install_insn to install the
final form. Use insert_into_history to record the instruction in
the history buffer. Use move_insn to do delay slot filling.
(mips_emit_delays): Use add_fixed_insn instead of the emit_nop macro.
(macro_build, mips16_macro_build, macro_build_lui, mips_ip)
(mips16_ip): Use create_insn to initialize mips_cl_insns.
(EXTRACT_OPERAND, MIPS16_INSERT_OPERAND, MIPS16_EXTRACT_OPERAND): New.
(insn_uses_reg, reg_needs_delay, append_insn, macro_build)
(mips16_macro_build, macro_build_lui, mips16_macro, mips_ip)
(mips16_ip): Use the new macros instead of explicit masks and shifts.
* elfxx-mips.c (mips_elf_calculate_relocation): Handle special
'__gnu_local_gp' symbol used by gas -mno-shared.
gas/ChangeLog
* config/tc-mips.c (macro_build_lui): Use '__gnu_local_gp'
instead of '_gp' for -mno-shared optimization.
(s_cpload): Ditto.
(s_abicalls): Document it in the comment.
(md_show_usage): Document the -mno-shared option.
gas/testsuite/ChangeLog
* gas/mips/elf-rel23b.d: Use '__gnu_local_gp' instead of '_gp'
for -mno-shared optimization.
* gas/mips/elf-rel25a.d: Ditto.
ld/testsuite/ChangeLog
* ld-mips-elf/multi-got-no-shared-1.s,
ld-mips-elf/multi-got-no-shared-2.s,
ld-mips-elf/multi-got-no-shared.d: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
(mips_opts): Initialize it.
(HAVE_32BIT_ADDRESSES): Set to true if pointers are 32 bits wide.
(HAVE_64BIT_ADDRESSES): Redefine as !HAVE_32BIT_ADDRESSES.
(HAVE_32BIT_SYMBOLS, HAVE_64BIT_SYMBOLS): New macros.
(load_address): Use HAVE_64BIT_SYMBOLS instead of HAVE_64BIT_ADDRESSES
when deciding whether to use a symbolic %highest/%higher expansion.
(macro): Likewise. Remove o64/n32 linux hack. Always use
ADDRESS_ADD*_INSN for address addition in the expansion of "dla"
and "la". Handle constants separately from symbolic expressions in
the "ld_st:" case, using 64-bit arithmetic if HAVE_64BIT_ADDRESSES
and using load_register to load the high part of the address.
(OPTION_MSYM32, OPTION_NO_MSYM32): New macros.
(OPTION_ELF_BASE): Bump by 2.
(md_longopts): Add entries for -msym32 and -mno-sym32.
(md_parse_option): Handle them.
(usage): Document them.
(s_mipsset): Handle ".set sym32" and ".set nosym32".
(s_cpload, s_cpsetup): Use HAVE_64BIT_SYMBOLS instead of
HAVE_64BIT_ADDRESSES to detect 64-bit values of "_gp".
* doc/c-mips.texi: Document ".set sym32", ".set nosym32",
-msym32 and -mno-sym32.
for 64bit address space non-PIC. Fix formatting.
(macro): Likewise. Simplify code.
(md_parse_option): Don't bail out if -G 0 is set for PIC code.
(mips_after_parse_args): Simplify code.
%dtprel_lo, %tprel_hi, %tprel_lo, and %gottprel.
(parse_relocation): Check for a word break after a relocation
operator.
(md_apply_fix3): Handle TLS relocations, and mark thread-local
symbols.
* ld-mips-elf/reloc-merge-lo16.d: Correct symbol
table size for __start.
2005-02-22 Eric Christopher <echristo@redhat.com>
* config/tc-mips.c (struct proc): Change isym to
func_sym. New member func_end_sym.
(s_mips_ent): Update.
(s_mips_end): Ditto. Add code to compute function size.
* config/tc-mips.c (append_insn): Call dwarf2_emit_insn() before
emitting insn.
gas/testsuite/:
* gas/mips/mips16-dwarf2.d: New test to check DWARF2 line
information for MIPS16.
* gas/mips/mips16-dwarf2.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
(macro): Don't use AT if .set noat is in effect. Fix formatting.
Catch macros which are unexpandable without AT. Remove duplicate
zeroing of used_at.
(macro2): Remove duplicate zeroing of used_at.
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* elf32-mips.c (elf_mips16_howto_table_rel): New array for MIPS16
reloc howtos. Add R_MIPS16_HI16 and R_MIPS16_LO16 relocs and
R_MIPS16_GOT16 and R_MIPS16_CALL16 placeholders.
(elf_mips16_jump_howto): Move into elf_mips16_howto_table_rel.
(elf_mips16_gprel_howto): Likewise. Redefine src_mask and
dst_mask.
(mips16_gprel_reloc): Remove bit shuffling; call
_bfd_mips16_elf_reloc_unshuffle(), _bfd_mips_elf_gprel16_with_gp()
and _bfd_mips16_elf_reloc_shuffle() instead.
(mips16_reloc_map): New reloc map for MIPS16 relocs.
(bfd_elf32_bfd_reloc_type_lookup): Use mips16_reloc_map for MIPS16
relocs.
(mips_elf32_rtype_to_howto): Fetch MIPS16 howtos from
elf_mips16_howto_table_rel.
* elf64-mips.c (mips16_elf64_howto_table_rel): New array for
MIPS16 REL reloc howtos. Add R_MIPS16_HI16 and R_MIPS16_LO16
relocs and R_MIPS16_GOT16 and R_MIPS16_CALL16 placeholders.
(elf_mips16_jump_howto): Move into mips16_elf64_howto_table_rel.
(elf_mips16_gprel_howto): Likewise. Redefine src_mask and
dst_mask.
(mips16_elf64_howto_table_rela): New array for MIPS16 RELA
reloc howtos. Add R_MIPS16_26, R_MIPS16_GPREL, R_MIPS16_HI16 and
R_MIPS16_LO16 relocs and R_MIPS16_GOT16 and R_MIPS16_CALL16
placeholders.
(mips16_gprel_reloc): Remove bit shuffling; call
_bfd_mips16_elf_reloc_unshuffle(), _bfd_mips_elf_gprel16_with_gp()
and _bfd_mips16_elf_reloc_shuffle() instead.
(mips16_reloc_map): New reloc map for MIPS16 relocs.
(bfd_elf64_bfd_reloc_type_lookup): Use mips16_reloc_map for MIPS16
relocs.
(mips_elf64_rtype_to_howto): Fetch MIPS16 howtos from
mips16_elf64_howto_table_rela or mips16_elf64_howto_table_rel.
* elfn32-mips.c (elf_mips16_howto_table_rel): New array for MIPS16
REL reloc howtos. Add R_MIPS16_HI16 and R_MIPS16_LO16 relocs and
R_MIPS16_GOT16 and R_MIPS16_CALL16 placeholders.
(elf_mips16_jump_howto): Move into elf_mips16_howto_table_rel.
(elf_mips16_gprel_howto): Likewise. Redefine src_mask and
dst_mask.
(mips16_gprel_reloc): Remove bit shuffling; call
_bfd_mips16_elf_reloc_unshuffle(), _bfd_mips_elf_gprel16_with_gp()
and _bfd_mips16_elf_reloc_shuffle() instead.
(mips16_reloc_map): New reloc map for MIPS16 relocs.
(bfd_elf32_bfd_reloc_type_lookup): Use mips16_reloc_map for MIPS16
relocs.
(mips_elf_n32_rtype_to_howto): Fetch MIPS16 howtos from
elf_mips16_howto_table_rela or elf_mips16_howto_table_rel.
* elfxx-mips.c (_bfd_mips16_elf_reloc_unshuffle): New function to
handle bit shuffling for MIPS16 relocs.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
(_bfd_mips_elf_lo16_reloc): Use _bfd_mips16_elf_reloc_unshuffle()
and _bfd_mips16_elf_reloc_shuffle().
(_bfd_mips_elf_generic_reloc): Likewise.
(mips_elf_calculate_relocation): Likewise. Handle R_MIPS16_HI16
and R_MIPS16_LO16.
(mips_elf_obtain_contents): Remove bit shuffling.
(mips_elf_perform_relocation): Likewise; call
_bfd_mips16_elf_reloc_unshuffle() and _bfd_mips16_elf_reloc_shuffle()
instead.
(_bfd_mips_elf_relocate_section): Likewise. Handle R_MIPS16_HI16
and R_MIPS16_LO16.
* elfxx-mips.h (_bfd_mips16_elf_reloc_unshuffle): Declare.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
* reloc.c (BFD_RELOC_MIPS16_HI16): New reloc.
(BFD_RELOC_MIPS16_HI16_S): Likewise.
(BFD_RELOC_MIPS16_LO16): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (reloc_needs_lo_p): Handle
BFD_RELOC_MIPS16_HI16_S.
(fixup_has_matching_lo_p): Handle BFD_RELOC_MIPS16_LO16.
(append_insn): Add BFD_RELOC_MIPS16_GPREL, BFD_RELOC_MIPS16_HI16_S
and BFD_RELOC_MIPS16_LO16 to relocs to suppress overflow
complaints on.
(mips16_ip): Resolve BFD_RELOC_MIPS16_HI16_S,
BFD_RELOC_MIPS16_HI16 and BFD_RELOC_MIPS16_LO16 for constants.
Call my_getSmallExpression() to parse percent operators.
(percent_op_match, mips_percent_op): Separate definitions.
(mips16_percent_op): Define percent operators for the MIPS16 mode.
(parse_relocation): Handle the MIPS16 mode using
mips16_percent_op.
(md_apply_fix3): Handle BFD_RELOC_MIPS16_HI16,
BFD_RELOC_MIPS16_HI16_S and BFD_RELOC_MIPS16_LO16.
gas/testsuite/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* gas/mips/mips16-hilo.d: New test for the R_MIPS16_HI16 and
R_MIPS16_LO16 relocs.
* gas/mips/mips16-hilo-n32.d: Likewise, for the n32 ABI.
* gas/mips/mips16-hilo.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
include/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* elf/mips.h (R_MIPS16_GOT16): New reloc code.
(R_MIPS16_CALL16): Likewise.
(R_MIPS16_HI16): Likewise.
(R_MIPS16_LO16): Likewise.
(R_MIPS16_min): New fake reloc code.
(R_MIPS16_max): Likewise.
ld/testsuite/:
2005-02-15 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* ld-mips-elf/mips16-hilo.d: New test for the R_MIPS16_HI16 and
R_MIPS16_LO16 relocs.
* ld-mips-elf/mips16-hilo-n32.d: Likewise, for the n32 ABI.
* ld-mips-elf/mips16-hilo.s: Auxiliary source for the new tests.
* ld-mips-elf/mips-elf.exp: Run the new tests.
Thiemo Seufer
David Ung
Nick Clifton
Richard Henderson
Chao-ying Fu
Zack Weinberg
Maciej W. Rozycki
H.J. Lu
Eric Christopher
Richard Sandiford
Daniel Jacobowitz
Alan Modra
Ben Elliston
Fred Fish
Ian Lance Taylor