A recent patch introduced a call to warning, and the string used
had a trailing newline, which is not correct; the nightly ARI run
caught it, so this patch removes it.
gdb/ChangeLog:
* ravenscar-thread.c (ravenscar_inferior_created): Remove
trailing newline at end of string in call to warning.
Tested on powerpc-eabispe, no regression.
When debugging a program using a ravenscar runtime, the thread
layer sometimes gets confused, and even missing some threads.
This was traced to an assumption that ravenscar_wait was making,
which is that calling the "to_wait" target_ops method would
set the inferior_ptid, so that we could then use that assumption
to update our thread_list and current ptid. However, this has not
been the case for quite a while now. This patch fixes the problem
by assigning inferior_ptid the ptid returned by "to_wait".
gdb/ChangeLog:
* ravenscar-thread.c (ravenscar_wait): Update inferior ptid
with event ptid from the lower layer before doing the
ravenscar-specific update.
Connecting to a TSIM simulator over the remote protocol causes GDB
to crash with the following failed assertion:
(gdb) tar remote :1234
Remote debugging using :1234
/[...]/gdb/ravenscar-thread.c:182: internal-error: ravenscar_update_inferior_ptid: Assertion `!is_ravenscar_task (inferior_ptid)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) y
What happens is the following. Upon connection to the target, GDB
sends a 'qfThreadInfo' query, which is the query asking the target
for the ID of the first thread, and TSIM replies 'm0':
Sending packet: $qfThreadInfo#bb...Ack
Packet received: m0
As a result of this, GDB takes the '0' as the TID, and because of it,
constructs a ptid whose value is {42000, 0, 0}. This trips our
!is_ravenscar_task check, because all it does to identify threads
corresponding to ravenscar tasks is that their lwp is null, because
that's how we construct their ptid.
But this is unfortunatly not sufficient when debugging with TSIM,
because the thread ID that TSIM returns causes the creation of
a ptid whose lwp is zero, which matches the current identification
scheme and yet is clearly not a ravenscar task.
The fix is to also make sure that the ptid's tid field is nonzero.
gdb/ChangeLog:
* ravenscar-thread.c (is_ravenscar_task): Also verify that
the ptid's TID is nonzero.
Trying to debug a program using a stripped version of the ravenscar
runtime, we can get the following error:
(gdb) cont
Continuing.
Cannot find Ada_Task_Control_Block type. Aborting
This is because the ravenscar-thread layer makes the assumption that
the runtime is built the way we expect it, meaning that the Ada tasking
units we rely on for Ada tasking debugging, are built with debugging
information, and that this debug information has not been stripped from
the runtime.
When this assumption is not true, resuming such a program can trigger
the error above, which then leads GDB a little confused. For instance,
we can see things like:
(gdb) bt
Target is executing.
This patch fixes the issue by disabling the ravenscar thread layer
if we detect that the runtime is missing some of the debugging info
we need in order to support Ada task debugging. This is the best
we can do, as the ravenscar-thread layer actually depends on the
ada-tasks layer to implement thread debugging.
gdb/ChangeLog:
* ada-lang.h (ada_get_tcb_types_info): Add declaration.
* ada-tasks.c (ada_get_tcb_types_info): Renames get_tcb_types_info.
Make non-static. Change return type to char *. Adjust code
accordingly. Rewrite the function's documentation.
(read_atcb): Adjust call to get_tcb_types_info accordingly.
* ravenscar-thread.c (ravenscar_inferior_created): Check that
we have enough debugging information in the runtime to support
Ada task debugging before we enable the ravenscar-thread layer.
This patch reworks the ravenscar-thread layer to remove the
assumption that the target only has 1 CPU. In particular,
when connected to a QEMU target over the remote protocol,
QEMU reports each CPU as one thread. This patch adapts
the ravenscar-thread layer to this, and adds a large comment
explaining the general design of this unit.
gdb/ChangeLog:
* ada-lang.h (ada_get_task_info_from_ptid): Add declaration.
* ada-tasks.c (ada_get_task_info_from_ptid): New function.
* ravenscar-thread.c: Add into comment.
(base_magic_null_ptid): Delete.
(base_ptid): Change documentation.
(ravenscar_active_task): Renames ravenscar_running_thread.
All callers updated throughout.
(is_ravenscar_task, ravenscar_get_thread_base_cpu): New function.
(ravenscar_task_is_currently_active): Likewise.
(get_base_thread_from_ravenscar_task): Ditto.
(ravenscar_update_inferior_ptid): Adjust to handle multiple CPUs.
(ravenscar_runtime_initialized): Likewise.
(get_running_thread_id): Add new parameter "cpu". Adjust
implementation to handle this new parameter.
(ravenscar_fetch_registers): Small adjustment to use
is_ravenscar_task and ravenscar_task_is_currently_active in
order to decide whether to use the target beneath or this
module's arch_ops.
(ravenscar_store_registers, ravenscar_prepare_to_store): Likewise.
(ravenscar_stopped_by_sw_breakpoint): Use
get_base_thread_from_ravenscar_task to get the underlying
thread, rather than using base_ptid.
(ravenscar_stopped_by_hw_breakpoint, ravenscar_stopped_by_watchpoint)
(ravenscar_stopped_data_address, ravenscar_core_of_thread):
Likewise.
(ravenscar_inferior_created): Do not set base_magic_null_ptid.
We have noticed a regression in our watchpoint support when debugging
through the remote protocol a program running on a bare metal platform,
when the program uses what we call the Ravenscar Runtime.
This runtime is a subset of the Ada runtime defined by the Ravenscar
Profile. One of the nice things about this runtime is that it provides
tasking, which is equivalent to the concept of threads in C (it is
actually often mapped to threads, when available). For bare metal
targets, however, there is no OS, and therefore no thread layer.
What we did, then, was add a ravenscar-thread layer, which has insider
knowledge of the runtime to get the list of threads, but also all
necessary info to perform thread switching.
For the record, the commit which caused the regression is:
commit 799a2abe61
Date: Mon Nov 30 16:05:16 2015 +0000
Subject: remote: stop reason and watchpoint data address per thread
Running local-watch-wrong-thread.exp with "maint set target-non-stop
on" exposes that gdb/remote.c only records whether the target stopped
for a breakpoint/watchpoint plus the watchpoint data address *for the
last reported remote event*. But in non-stop mode, we need to keep
that info per-thread, as each thread can end up with its own
last-status pending.
Our testcase is very simple. We have a package defining a global
variable named "Watch"...
package Pck is
Watch : Integer := 1974;
end Pck;
... and a main subprogram which changes its value
procedure Foo is
begin
Pck.Watch := Pck.Watch + 1;
end Foo;
To reproduce, we built our program as usual, started it in QEMU,
and then connected GDB to QEMU...
(gdb) target remote :4444
(gdb) break _ada_foo
(gdb) cont <--- this is to make sure the program is started
and the variable we want to watch is initialized
... at which point we try to use a watchpoint on our global variable:
(gdb) watch watch
... but, upon resuming the execution with a "cont", we expected to
get a watchpoint-hit notification, such as...
(gdb) cont
Hardware watchpoint 2: watch
Old value = 1974
New value = 1975
0xfff00258 in foo () at /[...]/foo.adb:6
6 end Foo;
... but unfortunately, we get a SIGTRAP instead:
(gdb) cont
Program received signal SIGTRAP, Trace/breakpoint trap.
foo () at /[...]/foo.adb:6
6 end Foo;
What happens is that, on the one hand, the change in remote.c
now stores the watchpoint-hit notification info in the thread
that received it; and on the other hand, we have a ravenscar-thread
layer which manages the thread list on top of the remote protocol
layer. The two of them get disconnected, and this eventually results
in GDB not realizing that we hit a watchpoint. Below is how:
First, once connected and just before inserting our watchpoint,
we have the ravenscar-thread layer which built the list of threads
by extracting some info from inferior memory, giving us the following
two threads:
(gdb) info threads
Id Target Id Frame
1 Thread 0 "0Q@" (Ravenscar task) foo () at /[...]/foo.adb:5
* 2 Thread 0x24618 (Ravenscar task) foo () at /[...]/foo.adb:5
The first thread is the only thread QEMU told GDB about. The second
one is a thread that the ravenscar-thread added. QEMU has now way
to know about those threads, since they are really embedded inside
the program; that's why we have the ravenscar layer, which uses
inside-knowledge to extract the list of threads.
Next, we insert a watchpoint, which applies to all threads. No problem
so far.
Then, we continue; meaning that GDB sends a Z2 packet to QEMU to
get the watchpoint inserted, then a vCont to resume the program's
execution. The program hits the watchpoints, and thererfore QEMU
reports it back:
Packet received: T05thread:01;watch:000022c4;
Since QEMU knows about one thread and one thread only, it stands
to reason that it would say that the event applies to thread:01,
which is our first thread in the "info threads" listing. That
thread has a ptid of {42000, lwp=1, tid=0}.
This is where Pedro's change kicks in: Seeing this event, and
having determined that the event was reported for thread 01,
and therefore ptid {42000, lwp=1, tid=0}, it saves the watchpoint-hit
event info in the private area of that thread/ptid. Once this is
done, remote.c's event-wait layer returns.
Enter the ravenscar-thread layer of the event-wait, which does
a little dance to delegate the wait to underlying layers with
ptids that those layers know about, and then when the target_beneath's
to_wait is done, tries to figure out which thread is now the active
thread. The code looks like this:
1. inferior_ptid = base_ptid;
2. beneath->to_wait (beneath, base_ptid, status, 0);
3. [...]
4. ravenscar_update_inferior_ptid ();
5.
6. return inferior_ptid;
Line 1 is where we reset inferior_ptid to the ptid that
the target_beneath layer knows about, allowing us to then
call its to_wait implementation (line 2). And then, upon
return, we call ravenscar_update_inferior_ptid, which reads
inferior memory to determine which thread is actually active,
setting inferior_ptid accordingly. Then we return that
inferior_ptid (which, again, neither QEMU and therefore nor
the remote.c layer knows about).
Upon return, we eventually arrive to the part where we try
to handle the inferior event: we discover that we got a SIGTRAP
and, as part of its handling, we call watchpoints_triggered,
which calls target_stopped_by_watchpoint, which eventually
remote_stopped_by_watchpoint, where Pedro's change kicks in
again:
struct thread_info *thread = inferior_thread ();
return (thread->priv != NULL
&& thread->priv->stop_reason == TARGET_STOPPED_BY_WATCHPOINT);
Because the ravenscar-thread layer changed the inferior_ptid
to the ptid of the active thread, inferior_thread now returns
the private data of that thread. This is not the thread that
QEMU reported the watchpoint-hit on, and thus, the function
returns "no watchpoint hit, mister". Hence GDB not understanding
the SIGTRAP, thus reporting it verbatim.
The way we chose to fix the issue is by making sure that the
ravenscar-thread layer doesn't let the remote layer be called
with inferior_ptid being set to a thread that the remote layer
does not know about.
gdb/ChangeLog:
* ravenscar-thread.c (ravenscar_stopped_by_sw_breakpoint)
(ravenscar_stopped_by_hw_breakpoint, ravenscar_stopped_by_watchpoint)
(ravenscar_stopped_data_address, ravenscar_core_of_thread):
New functions.
(init_ravenscar_thread_ops): Set the to_stopped_by_sw_breakpoint,
to_stopped_by_hw_breakpoint, to_stopped_by_watchpoint,
to_stopped_data_address and to_core_of_thread fields of
ravenscar_ops.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:
update_thread_list (void)
{
prune_threads ();
target_find_new_threads ();
update_threads_executing ();
}
And then prune_threads does:
prune_threads (void)
{
struct thread_info *tp, *next;
for (tp = thread_list; tp; tp = next)
{
next = tp->next;
if (!thread_alive (tp))
delete_thread (tp->ptid);
}
}
Calling thread_live on each thread one by one is expensive.
E.g., on Linux, it ends up doing kill(SIG0) once for each thread. Not
a big deal, but still a bunch of syscalls...
With the remote target, it's cumbersome. That thread_alive call ends
up generating one T packet per thread:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.
This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.
Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.
The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that. It's meant to be a no-op.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
(bsd_uthread_update_thread_list): ... this. Call prune_threads.
(bsd_uthread_target): Adjust.
* corelow.c (core_open): Adjust.
* dec-thread.c (dec_thread_find_new_threads): Update comment.
(dec_thread_update_thread_list): New function.
(init_dec_thread_ops): Adjust.
* gdbthread.h (prune_threads): New declaration.
* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
(thread_db_update_thread_list): ... this. Call prune_threads.
(init_thread_db_ops): Adjust.
* nto-procfs.c (procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
(procfs_attach, procfs_create_inferior, init_procfs_targets):
Adjust.
* obsd-nat.c (obsd_find_new_threads): Rename to ...
(obsd_update_thread_list): ... this. Call prune_threads.
(obsd_add_target): Adjust.
* procfs.c (procfs_target): Adjust.
(procfs_notice_thread): Update comment.
(procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
comment.
(ravenscar_wait): Adjust.
(ravenscar_find_new_threads): Rename to ...
(ravenscar_update_thread_list): ... this. Call prune_threads.
(init_ravenscar_thread_ops): Adjust.
* record-btrace.c (record_btrace_find_new_threads): Rename to ...
(record_btrace_update_thread_list): ... this. Adjust comment.
(init_record_btrace_ops): Adjust.
* remote.c (remote_threads_info): Rename to ...
(remote_update_thread_list): ... this. Call prune_threads.
(remote_start_remote, extended_remote_attach_1, init_remote_ops):
Adjust.
* sol-thread.c (check_for_thread_db): Adjust.
(sol_find_new_threads_callback): Rename to ...
(sol_update_thread_list_callback): ... this.
(sol_find_new_threads): Rename to ...
(sol_update_thread_list): ... this. Call prune_threads. Adjust.
(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
* target-delegates.c: Regenerate.
* target.c (target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* target.h (struct target_ops): Rename to_find_new_threads field
to to_update_thread_list.
(target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* thread.c (prune_threads): Make extern.
(update_thread_list): Adjust.
A long time ago Pedro pointed out that there are some calls to
find_target_beneath that pass in an explicit target_ops; but which
should instead use the ops provided to the method in question. See:
https://sourceware.org/ml/gdb-patches/2014-01/msg00429.html
This patch is just a minor cleanup to fix all such calls. There were
only three.
2014-07-18 Tom Tromey <tromey@redhat.com>
* spu-multiarch.c (spu_region_ok_for_hw_watchpoint): Pass "self"
to find_target_beneath.
* ravenscar-thread.c (ravenscar_prepare_to_store): Pass "ops" to
find_target_beneath.
(ravenscar_mourn_inferior): Pass "self" to find_target_beneath.
Currently there are many calls to help_list that pass the constant -1
as the "class" value. However, the parameter is declared as being of
type enum command_class, and uses of the constant violate this
abstraction.
This patch fixes the error everywhere it occurs in the gdb sources.
Tested by rebuilding.
2014-06-13 Tom Tromey <tromey@redhat.com>
* cp-support.c (maint_cplus_command): Pass all_commands, not -1,
to help_list.
* guile/guile.c (info_guile_command): Pass all_commands, not -1,
to help_list.
* tui/tui-win.c (tui_command): Pass all_commands, not -1, to
help_list.
* tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to
help_list.Pass all_commands, not -1, to help_list.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, tekhex_dump_command)
(binary_dump_command, binary_append_command): Pass all_commands,
not -1, to help_list.
* cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not
-1, to help_list.
* valprint.c (set_print, set_print_raw): Pass all_commands, not
-1, to help_list.
* typeprint.c (set_print_type): Pass all_commands, not -1, to
help_list.
* top.c (set_history): Pass all_commands, not -1, to help_list.
* target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass
all_commands, not -1, to help_list.
* symfile.c (overlay_command): Pass all_commands, not -1, to
help_list.
* spu-tdep.c (info_spu_command): Pass all_commands, not -1, to
help_list.
* serial.c (serial_set_cmd): Pass all_commands, not -1, to
help_list.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not
-1, to help_list.
* remote.c (remote_command, set_remote_cmd): Pass all_commands,
not -1, to help_list.
* ravenscar-thread.c (set_ravenscar_command): Pass all_commands,
not -1, to help_list.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd): Pass
all_commands, not -1, to help_list.
* macrocmd.c (macro_command): Pass all_commands, not -1, to
help_list.
* language.c (set_check): Pass all_commands, not -1, to help_list.
* infcmd.c (unset_command): Pass all_commands, not -1, to
help_list.
* frame.c (set_backtrace_cmd): Pass all_commands, not -1, to
help_list.
* dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to
help_list.
* dcache.c (set_dcache_command): Pass all_commands, not -1, to
help_list.
* breakpoint.c (save_command): Pass all_commands, not -1, to
help_list.
* ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass
all_commands, not -1, to help_list.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
This removes a few more erroneous calls to add_target. These calls
end up installing the target in a user-visible way; but these targets
are all auto-activated and, I think, should never be explicitly
requested.
I have no way to test these.
* aix-thread.c (_initialize_aix_thread): Use
complete_target_initialization.
* bsd-uthread.c (_initialize_bsd_uthread): Use
complete_target_initialization.
* dec-thread.c (_initialize_dec_thread): Use
complete_target_initialization.
* ravenscar-thread.c (_initialize_ravenscar): Use
complete_target_initialization.
* sol-thread.c (_initialize_sol_thread): Use
complete_target_initialization.
* spu-multiarch.c (_initialize_spu_multiarch): Use
complete_target_initialization.
-Wpointer-sign catches all these cases across the codebase that should
be using gdb_byte for raw target bytes. I think these are all
obvious, hence I've collapsed into a single patch.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change type to
gdb_byte[].
(aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
* ada-lang.c (ada_value_assign): Use gdb_byte.
* alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
(alphanbsd_sigtramp_offset): Use gdb_byte.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
(arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
(eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
(arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
* arm-tdep.c (arm_stub_unwind_sniffer)
(arm_displaced_init_closure): Use gdb_byte.
(arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
(arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
* arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
* arm-wince-tdep.c (arm_wince_le_breakpoint)
(arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
(arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
(arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
(arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
* cris-tdep.c (push_stack_item, cris_push_dummy_call)
(cris_store_return_value, cris_extract_return_value): Use
gdb_byte.
(constraint): Change type of parameter to char * from signed
char*. Use gdb_byte.
* dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
of local buffer to gdb_byte *.
* dwarf2read.c (read_index_from_section): Use gdb_byte.
(create_dwp_hash_table): Change type of locals to gdb_byte *.
(add_address_entry): Change type of local buffer to gdb_byte[].
* frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
(frv_push_dummy_call): Use gdb_byte.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
(hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
(hppa_hpux_supply_save_state): Use gdb_byte.
* hppa-tdep.c (hppa32_push_dummy_call)
(hppa64_convert_code_addr_to_fptr): Use gdb_byte.
* ia64-tdep.c (extract_bit_field, replace_bit_field)
(slotN_contents, replace_slotN_contents): Change type of parameter
to gdb_byte *.
(fetch_instruction, ia64_pseudo_register_write)
(ia64_register_to_value, ia64_value_to_register)
(ia64_extract_return_value, ia64_store_return_value)
(ia64_push_dummy_call): Use gdb_byte.
* m32c-tdep.c (m32c_return_value): Remove cast.
* m68hc11-tdep.c (m68hc11_pseudo_register_write)
(m68hc11_push_dummy_call, m68hc11_store_return_value): Use
gdb_byte.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
* mn10300-tdep.c (mn10300_store_return_value)
(mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
gdb_byte.
* moxie-tdep.c (moxie_process_readu): Use gdb_byte.
(moxie_process_record): Remove casts.
* ppc-ravenscar-thread.c (supply_register_at_address)
(ppc_ravenscar_generic_store_registers): Use gdb_byte.
* ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
* remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
* remote-mips.c (mips_xfer_memory): Use gdb_byte.
* remote.c (compare_sections_command): Use gdb_byte.
* score-tdep.c (score7_free_memblock): Change type of parameter to
gdb_byte *.
* sh-tdep.c (sh_justify_value_in_reg): Change return type to
gdb_byte *. Use gdb_byte.
(sh_push_dummy_call_fpu): Use gdb_byte.
(sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
(sh_store_return_value_nofpu, sh_store_return_value_fpu)
(sh_register_convert_to_virtual, sh_register_convert_to_raw):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
* sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
(sh64_store_return_value, sh64_register_convert_to_virtual):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh64_pseudo_register_write): Use gdb_byte.
* solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
* solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
buffer.
(irix_current_sos): Use gdb_byte.
* solib-som.c (som_current_sos): Use gdb_byte.
* sparc-ravenscar-thread.c (supply_register_at_address)
(sparc_ravenscar_generic_store_registers): Use gdb_byte.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
* tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
'gdb_byte *'.
* tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
'gdb_byte *'.
* tracepoint.c (tfile_fetch_registers): Use gdb_byte.
* xstormy16-tdep.c (xstormy16_extract_return_value)
(xstormy16_store_return_value): Change parameter type to
'gdb_byte *'. Adjust.
(xstormy16_push_dummy_call): Use gdb_byte.
* xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
(call0_analyze_prologue, execute_code): Use gdb_byte.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
The use of the ravenscar_open static global is unnecessary.
This patch removes it. It also removes some routines that
were created in association with the management of this global.
gdb/ChangeLog:
* ravenscar-thread.c (ravenscar_is_open): Delete.
(ravenscar_initialize): Move most of the code from here...
(ravenscar_inferior_created): ... to there. Invert logic.
(ravenscar_close): Delete.
(init_ravenscar_thread_ops): Remove setting of
ravenscar_ops.to_close.
When debugging a program using the Ravenscar profile, the debugger
sometimes tries to send the following packet to the remote after
the inferior exited.
(gdb) c
Continuing.
[...]
Sending packet: $vCont;c:1#13...Ack
Packet received: W00
Sending packet: $Hg1#e0...putpkt: write failed: Broken pipe.
As the inferior exited, the remote has already disconnected, and thus
the operation fails.
The reason why GDB sends the package is because the ravenscar-thread
module tries to updates the list of threads. But this doesn't make
sense, since the program has exited. This patch fixes it.
gdb/ChangeLog:
* ravenscar-thread.c (ravenscar_wait): Only update the list
of threads and inferior_ptid if the inferior is still alive.
Originally, this function had a parameter called `warn_if_null'
which would trigger a message to be printed on stdout if the
program was found to not use Ada tasking. It used one of the printf_
functions for that, which is wrong when considering the context of
GDB/MI interpreters.
So, this patch changes this function to stop printing the message,
and leaves that part to the callers instead. It also changes the
semantics slightly to return the number of tasks found, rather than
a yes/no answer. Not strictly needed, but simple enough to do, and
potentially useful later.
gdb/ChangeLog:
* ada-lang.h (ada_build_task_list): Remove parameter
`warn_if_null'.
* ada-tasks.c (ada_build_task_list): Remove parameter
`warn_if_null'. Adjust implementation and documentation.
(valid_task_id, ada_get_environment_task)
iterate_over_live_ada_tasks): Adjust call to ada_build_task_list.
(info_tasks_command): Adjust implementation.
(task_command): Likewise.
* ravenscar-thread.c (ravenscar_find_new_threads): Fix call
to ada_build_task_list.
The mapping between Ada tasks, and the underlying threads is
normally maintained by the GNAT runtime under the known_tasks
array. For performance reasons, this array is just a static
array with 10_000 entries in it. However, this is not very
practical in certain environments where memory is limited.
For those environments, the runtime has been enhanced to use
an alternate scheme with a linked list.
This change enhances the Ada tasking support to recognize this
situation and use the correct way of reading the tasks info
based on the the situation.
gdb/ChangeLog (Tristan Gingold)
* ada-tasks.c (KNOWN_TASKS_LIST): New macro.
(tcb_fieldno): Add activation_link field.
(get_known_tasks_addr): Moved and rewritten.
(get_tcb_types_info): Set activation_link field.
(read_known_tasks_array): Add parameter. Rewritten.
(read_known_tasks_list): New function.
(read_known_tasks): New function.
(ada_build_task_list): Call read_known_tasks instead of
read_known_tasks_array.
* ravenscar-thread.c: Add first_task_name constant.
(has_ravenscar_runtime): Check for task list too.
A new-line was missing at the end of the output of the `show ravenscar
task-switching' command. For instance:
(gdb) show ravenscar task-switching
Support for Ravenscar task/thread switching is enabled(gdb)
This patch fixes it.
gdb/ChangeLog:
* ravenscar-thread.c (show_ravenscar_task_switching_command):
Add missing '\n' in output.
The GNAT Ravenscar implementation has recently been enhanced to allow
programs using that runtime to run on multi-cpu systems. One of the
changes that were made is that the name of the symbol we use to
determine which task is the currently-running task has changed.
This patch enhances the debugger to use the new name, and fallback on
the old name if not found (this is for compatibility with older versions
of the compiler/runtime).
gdb/ChangeLog:
* ravenscar-thread.c (running_thread_name): Change value.
(read_thread_id): Remove advance declaration.
(get_running_thread_msymbol): New function.
(has_ravenscar_runtime): Use get_running_thread_msymbol to
compute msym_running_thread.
(get_running_thread_id): Renames read_thread_id. Slight modifications
to not take any argument anymore, using get_running_thread_msymbol
to determine which symbol to use instead.
(ravenscar_running_thread): Use get_running_thread_id instead of
read_thread_id.
gdb/ChangeLog (Jerome Guitton, Joel Brobecker):
* ravenscar-thread.c, ravenscar-thread.h, ravenscar-sparc-thread.c:
New files.
* configure.tgt (sparc-*-*): Add ravenscar-thread.o and
ravenscar-sparc-thread.o to gdb_target_obs.