* acinclude.m4: New file, containing the hand-written local macro
definitions that used to be in aclocal.m4. Don't sinclude
../bfd/aclocal.m4 any more; running aclocal in this directory will
get us the definitions we need. HOWEVER: Do sinclude
../bfd/acinclude.m4, because we need the definition of
BFD_NEED_DECLARATION.
* aclocal.m4: Regenerated by aclocal.
* configure: Regenerated by autoconf.
(init_dummy_target): New function, fills in dummy_target.
(initialize_targets): Use it.
* hpux-thread.c (hpux_thread_ops): Don't initialize statically.
(init_hpux_thread_ops): New function, fills in hpux_thread_ops.
(_initialize_hpux_thread): Use it.
* m3-nat.c (m3_ops): Don't initialize statically.
(init_m3_ops): New function, fills in m3_ops.
(_initialize_m3): Use it.
* infrun.c (set/show scheduler-locking) New command. Set a
mode bit that will control how GDB attempts to control thread
scheduling for step, continue, etc. (resume): make use of
the schedule-locking mode.
* target.h (struct target_ops): new field to_has_thread_control.
* sol-thread.c: initialize target_ops to_has_thread_control.
* procfs.c: ditto.
* target.c: ditto.
* m3-nat.c: ditto.
* remote.c: ditto.
* hpux-thread.c: ditto.
* infrun.c (set/show scheduler-locking) New command. Set a
mode bit that will control how GDB attempts to control thread
scheduling for step, continue, etc. (resume): make use of
the schedule-locking mode.
* target.h (struct target_ops): new field to_has_thread_control.
* sol-thread.c: initialize target_ops to_has_thread_control.
* procfs.c: ditto.
* target.c: ditto.
* m3-nat.c: ditto.
* remote.c: ditto.
* hpux-thread.c: ditto.
* gdb.texinfo: Changes made as part of a project to merge in
changes made by HP. Documentation makes extensive use of
@ifclear HPPA and @ifset HPPA. The HP manual omits doumentation
on remote debugging. There are differences in documentation
(HP vs. non-HP) on C++ support (aCC vs. gnu gcc++). Also,
the HP manual discusses catchpoints, hardware watchpoints, and
some HPUX specific limitations for shared library support.
There are also a number of @node changes.
* gdbint.texinfo (Formatting): Disambiguate a sentence.
(C Usage): Same.
I am stupid, so I had trouble reading these two sentences.
Now I can read them, so I am happy.
* gdb.texinfo (Shell Commands): fixed messages about shell usage.
HP was insisting on C shell. Now all UNIX platforms have the
same message. removed @ifset HPPA and @ifclear HPPA
Tue Jan 12 17:00:00 1999 Edith Epstein <eepstein@sophia.cygnus.com>
* inftarg.c (child_create_inferior): fixed HPUXHPPA specific
call to fork_inferior. The shell param is now NULL.
to conform to standards, fix spelling errors.
(ishex, stubhex, record_currthread, etc): Declare.
(ishex, stubhex): Declare char arg as int.
(pack_string): Comment out, never used but possibly useful.
(threadref_to_int, remote_get_threadinfo, etc): Make static.
as part of a project to merge in changes made by HP.
all-cfg.texi -- set HPPA for HP PA-RISC targets.
refcard.tex -- change documentation about catch; removed info catch.
HPPA-cfg.texi -- new file; HPPA configuration for manual.
called from wait_for_inferior. Instead, if a new thread-id is
detected, call add_thread. (MAGIC_NULL_PID): new macro, use
instead of the magic number "42000". (remote_find_new_threads):
if inferior_pid is unknown, get and use the current thread id.
(remote_start_remote): on connecting, attempt to get the current
thread id for inferior_pid. (remote_resume): If pid == -1,
then resume any-thread (not the current thread specifically).
* thread.c (info_threads_command): don't initialize current_pid
until after call to FIND_NEW_THREADS (which may change inferior_pid).
scope.exp, langs.exp, list.exp -- compile one file at a time, then link.
default.exp -- change expected messages for catch and info catch tests to
reflect hp merge changes.
to delete on clean.
(EXECUTABLES): update to reflect new additions.
* gdb.base/commands.exp: update message expected.
* gdb.base/default.exp: add copyright notice.
* gdb.base/funcargs.exp (timeout): if hpux, increase timeout.
* gdb.base/help.exp: update messages to reflect current text.
* gdb.base/recurse.exp: add hpppa*-*-bsd* to 'list' of enabled
targets for recurse tests.
* gdb.base/watchpoint.exp: if on hpux and not gcc compiled, then
skip this file.
* utils.c: <readline/readline.h> instead of "readline/readline.h".
* configure.in (TERM_LIB): Search for the appropriate term library
on the host system.
* configure: Regenerated.
* Makefile.in (TERMCAP): Set based on autoconf check.
* config/*/*.mh: Don't override TERMCAP setting.
than $(READLINE_SRC) so #include <readline/readline.h> will work.
* top.c: #include <readline/history.h> instead of "history.h".
* tracepoint.c: Likewise.
* mac-xdep.c: Likewise.
* blockframe.c (get_frame_saved_regs): If the saved_regs_addr ptr
is null, ensure that saved registers are copied from the local
variable that was used to obtain them.
* remote-rdp.c (rdp_init): Don't discard first character on reset.
(translate_open_mode): Define table.
(exec_swi): Handle SWI_Clock. SWI_Open now handles stdin/stdout.
SWI_Write returns number of bytes not written. SWI_Read does the
same. SWI_Seek should return success/failure flag. Fix SWI_Flen.
A patch from PR 15841 for the RDP (Demon) interface.
a printable representation.
(monitor_error): Call error after converting string into printable
format.
(monitor_printf{,_noecho}): If EXTRA_RDEBUG is defined, convert string
into printable form before printing.
(monitor_expect): Ditto.
(monitor_read_memory{,_single}): Call monitor_error, not error.
(monitor_read_memory): Return immediately if length is 0.
* ppcbug-rom.c (init_ppc_cmds): Fill in dump_registers field, which is
now required.
Re-do TARGET_PRINT_INSN_INFO, TARGET_PRINT_INSN, TARGET_ARCHITECTURE,
TARGET_ARCHITECTURE_AUTO, TARGET_BYTE_ORDER_SELECTABLE_P,
TARGET_BYTE_ORDER so that they can all be overriden.
Document.
Convert mn10300 and PPC targets.
Add two pointers (saved_regs, extra_info) to struct frame_info.
Introduce new macro FRAME_INIT_SAVED_REGS which replaces
FRAME_FIND_SAVED_REGS.
Document.
Use in mn10300 and rs6000 targets. Fix side effects on ALPHA, MIPS,
Z8K and SPARC targets.
* configure.in (with-sim-gpu2): Do not emit a -L argument without
an associated pathname. Link in the math library after the gpu2
library.
Assumes that libm is around (and doesn't take advantage of the
AC_CHECK_LIB(m) that is already in configure.in), but this is a
minor point and unlikely to cause problems.
* config/xm-aix4.h (SIGWINCH_HANDLER): Function `aix_resize_window'
must accept a signal number as parameter.
* config/rs6000/xm-rs6000.h (SIGWINCH_HANDLER): Ditto.
* utils.c (initialize_utils): Give a parameter to `SIGWINCH_HANDLER'.
* inferior.h (register_valid): Variable's type is `SIGNED char', not
`char'.
* findvar.c (register_valid): Ditto.
* defs.h (make_cleanup_func): Protect parameter list by `PARAMS'.
* gdbthread.h (unbind_target_thread_vector): Likewise.
Merged in m68k-linux patch from Andreas Schwab
1998-12-01 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
* Makefile.in, configure.host, configure.tgt: Add support for
m68k-linux.
* config/m68k/linux.mh: New file.
* config/m68k/linux.mt: New file.
* config/m68k/nm-linux.h: New file.
* config/m68k/tm-linux.h: New file.
* config/m68k/xm-linux.h: New file.
* gdb/m68klinux-nat.c: New file.
* gdbserver/low-linux.c: Add support for m68k-linux.
* gdb/config/m68k/tm-m68k.h (NUM_FREGS): New macro.
* config/m68k/tm-m68k.h (NUM_FREGS): m68k-linux patch.
Added NUM_FREGS macro.
* config/m68k/xm-linux.h: m68k-linux patch. New file.
* config/m68k/tm-linux.h: m68k-linux patch. New file.
* config/m68k/nm-linux.h: m68k-linux patch. New file.
* config/m68k/linux.mt: m68k-linux patch. New file.
* config/m68k/linux.mh: m68k-linux patch. New file.
* gdbserver/low-linux.c: m68k-linux patch. Added an ifdef
that checks the value of __GLIBC to decide whether or
not to include sys/reg.h.
* m68klinux-nat.c: m68k-linux patch. New file. Note
both m68k-tdep.c and m68klinux-nat.c contain definitions
for supply_gregset and supply_fpregset. The definitions
in m68k-tdep.c are valid is USE_PROC_FS is defined. Otherwise,
the definitions in m68klinux-nat.c will be used. This is a
bit of a hack. The supply_* routines do not belong in
*_tdep.c files. But, there are several lynx ports that currently
depend on these definitions.
* configure.tgt: m68k-linux patch. Added m68*-*-linux*
gdb_target.
* configure.host: m68k-linux patch. Added m68*-*-linux*
gdb_host.
* Makefile.in: m68k-linux patch. Added compile line for
m68klinux-nat.o
* config/i386/xm-cygwin.h: Remove REQUEST_QUIT definition.
* config/powerpc/xm-cygwin.h: Ditto.
PR 17664.
With this define in place, you can't type "q" to get out of GDB's pager
under Cygwin.
the stack frame. Their offset from the previous stack frame is in
fdata.gpr_offset and fdata.fpr_offset, not fdata.offset.
(gdb.base/return.exp)
* config/rs6000/tm-rs6000.h: Doc fixes.
* monitor.c (monitor_read_memory): Zero out pattern buffers
before calling re_search.
(parse_register_dump): Ditto.
PR 18049. This bug had existed erratically since I upgraded to
the new gnu-regex.c this last summer. The problem is mostly in
parse_register_dump; the allocated structure has some random values
in it and there is a flag set in the register_pattern structure by the
gnu-regex library which indicates that the values in the re_registers
should be trusted.
If those arbitrary contents aren't zero, gnu-regex tries to run realloc
on them and we get a core dump on some hosts for some targets when the
moon is just right.
* m32r-tdep.c (decode_prologue): If no branch or push fp is found,
but there's a stack adjust, then use that as the end of prologue.
(m32r_skip_prologue): don't skip past the first line if there is
line info. (m32r_virtual_frame_pointer): new function.
(m32r_fix_call_dummy): no return value needed.
* tracepoint.c: Move default definition of
TARGET_VIRTUAL_FRAME_POINTER from here to target.h.
* target.h: Add default definition of TARGET_VIRTUAL_FRAME_POINTER.
* ax-gdb.c (gen_frame_args_address, gen_frame_locals_address):
use TARGET_VIRTUAL_FRAME_POINTER to determine frame pointer.
(gen_trace_for_expr): new argument, address of tracepoint,
gets passed to new_agent_expr and added to struct agent_expr.
(is_nontrivial_conversion): call to new_agent_expr now requires
a dummy argument. (agent_command): use get_current_frame() to
get current PC scope; pass it to gen_trace_for_expr.
* ax-general.c (new_agent_expr): new argument, address of
tracepoint; store it in new field of struct agent_expr.
* ax.h (struct agent_expr): add new field for tracepoint address.
* ax-gdb.h: change prototypes to match above changes.
(CHILL_PRODUCER, etc): Comment out descriptions, not useful.
(IN_SOLIB_CALL_TRAMPOLINE): Rename info from IN_SOLIB_TRAMPOLINE.
(IN_SOLIB_RETURN_TRAMPOLINE): Describe.
(KERNEL_DEBUGGING, MIPSEL): No info about these, remove.
* config/mn10300/tm-mn10300.h (TARGET_VIRTUAL_FRAME_POINTER):
new target macro.
* mn10300-tdep.c (mn10300_virtual_frame_pointer): new function.
* tracepoint.c (encode_actions): Use the new target macro to
determine the virtual frame pointer, for collecting locals/args.
(add_local_symbols, collect_symbol): add a register/offset pair of
arguments so that the virtual frame pointer can be passed in.
Convert mn10300, MIPS and powerpc/rs6000 targets to use
BREAKPOINT_FROM_PC
Delete global variable memory_breakpoint_size. Use BREAKPOINT_FROM_PC
instead.
