When there is more than one inferior, the "record btrace" command should
only apply to the current inferior.
gdb/ChangeLog:
2020-03-19 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (record_btrace_enable_warn): Ignore thread if
its inferior is not recorded by us.
(record_btrace_target_open): Replace call to all_non_exited_threads ()
with call to current_inferior ()->non_exited_threads ().
(record_btrace_target::stop_recording): Likewise.
(record_btrace_target::close): Likewise.
(record_btrace_target::wait): Likewise.
(record_btrace_target::record_stop_replaying): Likewise.
gdb/testsuite/ChangeLog:
2020-03-19 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/multi-inferior.c: New test.
* gdb.btrace/multi-inferior.exp: New file.
In the record-btrace target, while replaying, we can only provide the PC
register. The btrace state is stored in the thread_info. So, when trying
to determine whether we are currently replaying, GDB calls
find_thread_ptid() to obtain the thread_info. It also asserts that we do
have a thread_info.
For new threads, libthread-db may fetch registers before the thread is
known to GDB. In this case, find_thread_ptid() returns nullptr and the
assertion fails.
Forward the fetch_registers request to the target beneath in that case.
gdb/ChangeLog:
2020-03-19 Markus Metzger <markus.t.metzger@intel.com>
* record-btrace.c (record_btrace_target::fetch_registers): Forward
request if we do not have a thread_info.
gdb/testsuite/ChangeLog:
2020-03-19 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/enable-new-thread.c: New test.
* gdb.btrace/enable-new-thread.exp: New file.
Currently there are many prefix commands that do nothing but call
either help_list or cmd_show_list. I happened to notice that one such
call, for "set print type", used the wrong command list parameter,
causing incorrect output.
Rather than fix this bug in isolation, I decided to eliminate this
possibility by adding two new ways to add prefix commands, which
simply route the call to help_list or cmd_show_list, as appropriate.
This makes it impossible for a mismatch to occur.
In some cases, a bit of output was removed; however, I don't think
this output in general was very useful. It seemed redundant with
what's already printed by help_list. A representative example is this
hunk, removed from ada-lang.c:
- printf_unfiltered (_(\
-"\"set ada\" must be followed by the name of a setting.\n"));
This simplified the CLI style set/show commands quite a bit, and
allowed the deletion of a macro.
This also cleans up some unusual code in windows-tdep.c.
Tested on x86-64 Fedora 30. Note that I have no way to build the
go32-nat.c change.
gdb/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* auto-load.c (show_auto_load_cmd): Remove.
(auto_load_show_cmdlist_get): Use add_show_prefix_cmd.
* arc-tdep.c (_initialize_arc_tdep): Use add_show_prefix_cmd.
(maintenance_print_arc_command): Remove.
* tui/tui-win.c (tui_command): Remove.
(tui_get_cmd_list): Use add_basic_prefix_cmd.
* tui/tui-layout.c (tui_layout_command): Remove.
(_initialize_tui_layout): Use add_basic_prefix_cmd.
* python/python.c (user_set_python, user_show_python): Remove.
(_initialize_python): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* guile/guile.c (set_guile_command, show_guile_command): Remove.
(install_gdb_commands): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_guile_command): Remove.
* dwarf2/read.c (set_dwarf_cmd, show_dwarf_cmd): Remove.
(_initialize_dwarf2_read): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Remove do_set and do_show parameters.
* cli/cli-style.c (set_style, show_style): Remove.
(_initialize_cli_style): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(cli_style_option::add_setshow_commands): Remove do_set and
do_show parameters.
(cli_style_option::add_setshow_commands): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
(STYLE_ADD_SETSHOW_COMMANDS): Remove macro.
(set_style_name): Remove.
* cli/cli-dump.c (dump_command, append_command): Remove.
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Remove.
(_initialize_cli_dump): Use add_basic_prefix_cmd.
* windows-tdep.c (w32_prefix_command_valid): Remove global.
(init_w32_command_list): Remove; move into ...
(_initialize_windows_tdep): ... here. Use add_basic_prefix_cmd.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Remove.
(_initialize_valprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* typeprint.c (set_print_type, show_print_type): Remove.
(_initialize_typeprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record.c (set_record_command, show_record_command): Remove.
(_initialize_record): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-cmds.c (_initialize_cli_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_command, show_command, set_debug, show_debug): Remove.
* top.h (set_history, show_history): Don't declare.
* top.c (set_history, show_history): Remove.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Remove.
(_initialize_target_descriptions): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* symtab.c (info_module_command): Remove.
(_initialize_symtab): Use add_basic_prefix_cmd.
* symfile.c (overlay_command): Remove.
(_initialize_symfile): Use add_basic_prefix_cmd.
* sparc64-tdep.c (info_adi_command): Remove.
(_initialize_sparc64_adi_tdep): Use add_basic_prefix_cmd.
* sh-tdep.c (show_sh_command, set_sh_command): Remove.
(_initialize_sh_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* serial.c (serial_set_cmd, serial_show_cmd): Remove.
(_initialize_serial): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Remove.
(_initialize_ser_tcp): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command)
(_initialize_rs6000_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* riscv-tdep.c (show_riscv_command, set_riscv_command)
(show_debug_riscv_command, set_debug_riscv_command): Remove.
(_initialize_riscv_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* remote.c (remote_command, set_remote_cmd): Remove.
(_initialize_remote): Use add_basic_prefix_cmd.
* record-full.c (set_record_full_command)
(show_record_full_command): Remove.
(_initialize_record_full): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record-btrace.c (cmd_set_record_btrace)
(cmd_show_record_btrace, cmd_set_record_btrace_bts)
(cmd_show_record_btrace_bts, cmd_set_record_btrace_pt)
(cmd_show_record_btrace_pt): Remove.
(_initialize_record_btrace): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Remove.
(_initialize_ravenscar): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* mips-tdep.c (show_mips_command, set_mips_command)
(_initialize_mips_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_check_command, maintenance_print_command)
(maintenance_set_cmd, maintenance_show_cmd): Remove.
(_initialize_maint_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(show_per_command_cmd): Remove.
* maint-test-settings.c (maintenance_set_test_settings_cmd):
Remove.
(maintenance_show_test_settings_cmd): Remove.
(_initialize_maint_test_settings): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint-test-options.c (maintenance_test_options_command):
Remove.
(_initialize_maint_test_options): Use add_basic_prefix_cmd.
* macrocmd.c (macro_command): Remove
(_initialize_macrocmd): Use add_basic_prefix_cmd.
* language.c (set_check, show_check): Remove.
(_initialize_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* infcmd.c (unset_command): Remove.
(_initialize_infcmd): Use add_basic_prefix_cmd.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Remove.
(_initialize_i386_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* go32-nat.c (go32_info_dos_command): Remove.
(_initialize_go32_nat): Use add_basic_prefix_cmd.
* cli/cli-decode.c (do_prefix_cmd, add_basic_prefix_cmd)
(do_show_prefix_cmd, add_show_prefix_cmd): New functions.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Remove.
(_initialize_frame): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* dcache.c (set_dcache_command, show_dcache_command): Remove.
(_initialize_dcache): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cp-support.c (maint_cplus_command): Remove.
(_initialize_cp_support): Use add_basic_prefix_cmd.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd, _initialize_btrace): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
* breakpoint.c (save_command): Remove.
(_initialize_breakpoint): Use add_basic_prefix_cmd.
* arm-tdep.c (set_arm_command, show_arm_command): Remove.
(_initialize_arm_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ada-lang.c (maint_set_ada_cmd, maint_show_ada_cmd)
(set_ada_command, show_ada_command): Remove.
(_initialize_ada_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* command.h (add_basic_prefix_cmd, add_show_prefix_cmd): Declare.
gdb/testsuite/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* gdb.cp/maint.exp (test_help): Simplify multiple_help_body.
Update tests.
* gdb.btrace/cpu.exp: Update tests.
* gdb.base/maint.exp: Update tests.
* gdb.base/default.exp: Update tests.
* gdb.base/completion.exp: Update tests.
This patch splits out some gdb-specific code from event-loop, into new
files async-event.[ch]. Strictly speaking this code could perhaps be
put into gdbsupport/, but because gdbserver does not currently use it,
it seemed better, for size reasons, to split it out.
gdb/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* tui/tui-win.c: Include async-event.h.
* remote.c: Include async-event.h.
* remote-notif.c: Include async-event.h.
* record-full.c: Include async-event.h.
* record-btrace.c: Include async-event.h.
* infrun.c: Include async-event.h.
* event-top.c: Include async-event.h.
* event-loop.h: Move some declarations to async-event.h.
* event-loop.c: Don't include ser-event.h or top.h. Move some
code to async-event.c.
* async-event.h: New file.
* async-event.c: New file.
* Makefile.in (COMMON_SFILES): Add async-event.c.
(HFILES_NO_SRCDIR): Add async-event.h.
This commit brings support for the DWARF line table is_stmt field to
GDB. The is_stmt field is used by the compiler when a single source
line is split into multiple assembler instructions, especially if the
assembler instructions are interleaved with instruction from other
source lines.
The compiler will set the is_stmt flag false from some instructions
from the source lines, these instructions are not a good place to
insert a breakpoint in order to stop at the source line.
Instructions which are marked with the is_stmt flag true are a good
place to insert a breakpoint for that source line.
Currently GDB ignores all instructions for which is_stmt is false.
This is fine in a lot of cases, however, there are some cases where
this means the debug experience is not as good as it could be.
Consider stopping at a random instruction, currently this instruction
will be attributed to the last line table entry before this point for
which is_stmt was true - as these are the only line table entries that
GDB tracks. This can easily be incorrect in code with even a low
level of optimisation.
With is_stmt tracking in place, when stopping at a random instruction
we now attribute the instruction back to the real source line, even
when is_stmt is false for that instruction in the line table.
When inserting breakpoints we still select line table entries for
which is_stmt is true, so the breakpoint placing behaviour should not
change.
When stepping though code (at the line level, not the instruction
level) we will still stop at instruction where is_stmt is true, I
think this is more likely to be the desired behaviour.
Instruction stepping is, of course, unchanged, stepping one
instruction at a time, but we should now report more accurate line
table information with each instruction step.
The original motivation for this work was a patch posted by Bernd
here:
https://sourceware.org/ml/gdb-patches/2019-11/msg00792.html
As part of that thread it was suggested that many issues would be
resolved if GDB supported line table views, this isn't something I've
attempted in this patch, though reading the spec, it seems like this
would be a useful feature to support in GDB in the future. The spec
is here:
http://dwarfstd.org/ShowIssue.php?issue=170427.1
And Bernd gives a brief description of the benefits here:
https://sourceware.org/ml/gdb-patches/2020-01/msg00147.html
With that all said, I think that there is benefit to having proper
is_stmt support regardless of whether we have views support, so I
think we should consider getting this in first, and then building view
support on top of this.
The gdb.cp/step-and-next-inline.exp test is based off a test proposed
by Bernd Edlinger in this message:
https://sourceware.org/ml/gdb-patches/2019-12/msg00842.html
gdb/ChangeLog:
* buildsym-legacy.c (record_line): Pass extra parameter to
record_line.
* buildsym.c (buildsym_compunit::record_line): Take an extra
parameter, reduce duplication in the line table, and record the
is_stmt flag in the line table.
* buildsym.h (buildsym_compunit::record_line): Add extra
parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Ignore
non-statement lines.
* dwarf2/read.c (dwarf_record_line_1): Add extra parameter, pass
this to the symtab builder.
(dwarf_finish_line): Pass extra parameter to dwarf_record_line_1.
(lnp_state_machine::record_line): Pass a suitable is_stmt flag
through to dwarf_record_line_1.
* infrun.c (process_event_stop_test): When stepping, don't stop at
a non-statement instruction, and only refresh the step info when
we land in the middle of a line's range. Also add an extra
comment.
* jit.c (jit_symtab_line_mapping_add_impl): Initialise is_stmt
field.
* record-btrace.c (btrace_find_line_range): Only record lines
marked as is-statement.
* stack.c (frame_show_address): Show the frame address if we are
in a non-statement sal.
* symmisc.c (dump_symtab_1): Print the is_stmt flag.
(maintenance_print_one_line_table): Print a header for the is_stmt
column, and include is_stmt information in the output.
* symtab.c (find_pc_sect_line): Find lines marked as statements in
preference to non-statements.
(find_pcs_for_symtab_line): Prefer is-statement entries.
(find_line_common): Likewise.
* symtab.h (struct linetable_entry): Add is_stmt field.
(struct symtab_and_line): Likewise.
* xcoffread.c (arrange_linetable): Initialise is_stmt field when
arranging the line table.
gdb/testsuite/ChangeLog:
* gdb.cp/step-and-next-inline.cc: New file.
* gdb.cp/step-and-next-inline.exp: New file.
* gdb.cp/step-and-next-inline.h: New file.
* gdb.dwarf2/dw2-is-stmt.c: New file.
* gdb.dwarf2/dw2-is-stmt.exp: New file.
* gdb.dwarf2/dw2-is-stmt-2.c: New file.
* gdb.dwarf2/dw2-is-stmt-2.exp: New file.
* gdb.dwarf2/dw2-ranges-base.exp: Update line table pattern.
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
With this patch, the help docs now respect 2 invariants:
* The first line of a command help is terminated by a '.' character.
* The last character of a command help is not a newline character.
Note that the changes for the last invariant were done by Tom, as part of :
[PATCH] Remove trailing newlines from help text
https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html
but some occurrences have been re-introduced since then.
Some help docs had to be rephrased/restructured to respect the above
invariants.
Before this patch, print_doc_line was printing the first line
of a command help documentation, but stopping at the first '.'
or ',' character.
This was giving inconsistent results :
* The first line of command helps was sometimes '.' terminated,
sometimes not.
* The first line of command helps was not always designed to be
readable/understandable/unambiguous when stopping at the first
'.' or ',' character.
This e.g. created the following inconsistencies/problems:
< catch exception -- Catch Ada exceptions
< catch handlers -- Catch Ada exceptions
< catch syscall -- Catch system calls by their names
< down-silently -- Same as the `down' command
while the new help is:
> catch exception -- Catch Ada exceptions, when raised.
> catch handlers -- Catch Ada exceptions, when handled.
> catch syscall -- Catch system calls by their names, groups and/or numbers.
> down-silently -- Same as the `down' command, but does not print anything.
Also, the command help doc should not be terminated by a newline
character, but this was not respected by all commands.
The cli-option -OPT framework re-introduced some occurences.
So, the -OPT build help framework was changed to not output newlines at the
end of %OPTIONS% replacement.
This patch changes the help documentations to ensure the 2 invariants
given above.
It implied to slightly rephrase or restructure some help docs.
Based on the above invariants, print_doc_line (called by
'apropos' and 'help' commands to print the first line of a command
help) now outputs the full first line of a command help.
This all results in a lot of small changes in the produced help docs.
There are less code changes than changes in the help docs, as a lot
of docs are produced by some code (e.g. the remote packet usage settings).
gdb/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-decode.h (print_doc_line): Add for_value_prefix argument.
* cli/cli-decode.c (print_doc_line): Likewise. It now prints
the full first line, except when FOR_VALUE_PREFIX. In this case,
the trailing '.' is not output, and the first character is uppercased.
(print_help_for_command): Update call to print_doc_line.
(print_doc_of_command): Likewise.
* cli/cli-setshow.c (deprecated_show_value_hack): Likewise.
* cli/cli-option.c (append_indented_doc): Do not append newline.
(build_help_option): Append newline after first appended_indented_doc
only if a second call is done.
(build_help): Append 2 new lines before each option, except the first
one.
* compile/compile.c (_initialize_compile): Add new lines after
%OPTIONS%, when not at the end of the help.
Change help doc or code
producing the help doc to respect the invariants.
* maint-test-options.c (_initialize_maint_test_options): Likewise.
Also removed the new line after 'Options:', as all other commands
do not put an empty line between 'Options:' and the first option.
* printcmd.c (_initialize_printcmd): Likewise.
* stack.c (_initialize_stack): Likewise.
* interps.c (interpreter_exec_cmd): Fix "Usage:" line that was
incorrectly telling COMMAND is optional.
* ada-lang.c (_initialize_ada_language): Change help doc or code
producing the help doc to respect the invariants.
* ada-tasks.c (_initialize_ada_tasks): Likewise.
* breakpoint.c (_initialize_breakpoint): Likewise.
* cli/cli-cmds.c (_initialize_cli_cmds): Likewise.
* cli/cli-logging.c (_initialize_cli_logging): Likewise.
* cli/cli-setshow.c (_initialize_cli_setshow): Likewise.
* cli/cli-style.c (cli_style_option::add_setshow_commands,
_initialize_cli_style): Likewise.
* corelow.c (core_target_info): Likewise.
* dwarf-index-cache.c (_initialize_index_cache): Likewise.
* dwarf2read.c (_initialize_dwarf2_read): Likewise.
* filesystem.c (_initialize_filesystem): Likewise.
* frame.c (_initialize_frame): Likewise.
* gnu-nat.c (add_task_commands): Likewise.
* infcall.c (_initialize_infcall): Likewise.
* infcmd.c (_initialize_infcmd): Likewise.
* interps.c (_initialize_interpreter): Likewise.
* language.c (_initialize_language): Likewise.
* linux-fork.c (_initialize_linux_fork): Likewise.
* maint-test-settings.c (_initialize_maint_test_settings): Likewise.
* maint.c (_initialize_maint_cmds): Likewise.
* memattr.c (_initialize_mem): Likewise.
* printcmd.c (_initialize_printcmd): Likewise.
* python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq,
_RegEx): Likewise.
* ravenscar-thread.c (_initialize_ravenscar): Likewise.
* record-btrace.c (_initialize_record_btrace): Likewise.
* record-full.c (_initialize_record_full): Likewise.
* record.c (_initialize_record): Likewise.
* regcache-dump.c (_initialize_regcache_dump): Likewise.
* regcache.c (_initialize_regcache): Likewise.
* remote.c (add_packet_config_cmd, init_remote_threadtests,
_initialize_remote): Likewise.
* ser-tcp.c (_initialize_ser_tcp): Likewise.
* serial.c (_initialize_serial): Likewise.
* skip.c (_initialize_step_skip): Likewise.
* source.c (_initialize_source): Likewise.
* stack.c (_initialize_stack): Likewise.
* symfile.c (_initialize_symfile): Likewise.
* symtab.c (_initialize_symtab): Likewise.
* target-descriptions.c (_initialize_target_descriptions): Likewise.
* top.c (init_main): Likewise.
* tracefile-tfile.c (tfile_target_info): Likewise.
* tracepoint.c (_initialize_tracepoint): Likewise.
* tui/tui-win.c (_initialize_tui_win): Likewise.
* utils.c (add_internal_problem_command): Likewise.
* valprint.c (value_print_option_defs): Likewise.
gdb/testsuite/ChangeLog
2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/style.exp: Update tests for help doc new invariants.
* gdb.base/help.exp: Likewise.
This adds more styling to the disassemble command. In particular,
addresses and function names in the disassembly are now styled.
This required fixing a small latent bug in set_output_style. This
function always passed NULL to emit_style_escape; but when writing to
a file other than gdb_stdout, it should emit the style escape
directly. (FWIW this is another argument for better integrating the
pager with ui_file and getting rid of this entire layer.)
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* utils.c (set_output_style): Sometimes pass stream to
emit_style_escape.
* ui-out.h (class ui_out) <can_emit_style_escape>: Declare.
* record-btrace.c (btrace_insn_history): Update.
* mi/mi-out.h (class mi_ui_out) <can_emit_style_escape>: New
method.
* disasm.h (gdb_pretty_print_disassembler): Add uiout parameter.
Update initializers.
<m_uiout>: New field.
<m_di>: Move lower.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Remove "uiout" parameter.
(dump_insns): Update.
* cli-out.h (class cli_ui_out) <can_emit_style_escape>: Declare.
* cli-out.c (cli_ui_out::can_emit_style_escape): New method.
gdb/testsuite/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add disassemble test.
* gdb.base/style.c (some_called_function): New function.
(main): Use it.
This adds field_unsigned and changes various places using field_fmt
with "%u" to use this instead. This also replaces an existing
equivalent helper function in record-btrace.c.
2019-07-15 Tom Tromey <tromey@adacore.com>
* mi/mi-out.h (class mi_ui_out) <do_field_unsigned>: Declare.
* mi/mi-out.c (mi_ui_out::do_field_unsigned): New method.
* cli-out.h (class cli_ui_out) <do_field_unsigned>: Declare.
* cli-out.c (cli_ui_out::do_field_int): New method.
* ui-out.c (ui_out::field_unsigned): New method.
* symfile.c (generic_load): Use field_unsigned.
(print_transfer_performance): Likewise.
* record-btrace.c (ui_out_field_uint): Remove.
(btrace_call_history_insn_range, btrace_call_history): Use
field_unsigned.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn): Use
field_unsigned.
* ui-out.h (class ui_out) <field_unsigned>: New method.
<do_field_unsigned>: Likewise.
I touched symtab.h and was surprised to see how many files were
rebuilt. I looked into it a bit, and found that defs.h includes
gdbarch.h, which in turn includes many things.
gdbarch.h is only needed by a minority ofthe files in gdb, so this
patch removes the include from defs.h and updates the fallout.
I did "wc -l" on the files in build/gdb/.deps; this patch reduces the
line count from 139935 to 137030; so there are definitely future
build-time savings here.
Note that while I configured with --enable-targets=all, it's possible
that some *-nat.c file needs an update. I could not test all of
these. The buildbot caught a few problems along these lines.
gdb/ChangeLog
2019-07-10 Tom Tromey <tom@tromey.com>
* defs.h: Don't include gdbarch.h.
* aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h,
alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h,
ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c,
cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h,
cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c,
compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c,
cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c,
dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c,
dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c,
dwarf2expr.c, expression.h, f-lang.c, frame-base.c,
frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h,
go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c,
i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c,
linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c,
mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c,
objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c,
parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c,
record-btrace.c, record.h, regcache-dump.c, regcache.h,
riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y,
sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c,
sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c,
sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h,
target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c,
tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c,
utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c,
xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update.
* s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise.
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This adds some output styling to the CLI.
A style is currently a foreground color, a background color, and an
intensity (dim or bold). (This list could be expanded depending on
terminal capabilities.)
A style can be applied while printing. For ui-out, this is done by
passing the style constant as an argument. For low-level cases,
fprintf_styled and fputs_styled are provided.
Users can control the style via a number of new set/show commands. In
the interest of not typing many nearly-identical documentation
strings, I automated this. On the down side, this is not very
i18n-friendly.
I've chose some default colors to use. I think it would be good to
enable this by default, so that when users start the new gdb, they
will see the new feature.
Stylizing is done if TERM is set and is not "dumb". This could be
improved when the TUI is available by using the curses has_colors
call. That is, the lowest layer could call this without committing to
using curses everywhere; see my other patch for TUI colorizing.
I considered adding a new "set_style" method to ui_file. However,
because the implementation had to interact with the pager code, I
didn't take this approach. But, one idea might be to put the isatty
check there and then have it defer to the lower layers.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* utils.h (set_output_style, fprintf_styled)
(fputs_styled): Declare.
* utils.c (applied_style, desired_style): New globals.
(emit_style_escape, set_output_style): New function.
(prompt_for_continue): Emit style escapes.
(fputs_maybe_filtered): Likewise.
(fputs_styled, fprintf_styled): New functions.
* ui-out.h (enum class ui_out_style_kind): New.
(class ui_out) <field_string, field_stream, do_field_string>: Add
style parameter.
* ui-out.c (ui_out::field_stream, ui_out::field_string): Add style
parameter.
* tui/tui-out.h (class tui_ui_out) <do_field_string>: Add style
parameter.
* tui/tui-out.c (tui_ui_out::do_field_string): Add style
parameter.
(tui_ui_out::do_field_string): Update.
* tracepoint.c (print_one_static_tracepoint_marker): Style
output.
* stack.c (print_frame_info, print_frame): Style output.
* source.c (print_source_lines_base): Style output.
* skip.c (info_skip_command): Style output.
* record-btrace.c (btrace_call_history_src_line): Style output.
(btrace_call_history): Likewise.
* python/py-framefilter.c (py_print_frame): Style output.
* mi/mi-out.h (class mi_ui_out) <do_field_string>: Add style
parameter.
* mi/mi-out.c (mi_ui_out::do_table_header)
(mi_ui_out::do_field_int): Update.
(mi_ui_out::do_field_string): Update.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Style output.
* cli/cli-style.h: New file.
* cli/cli-style.c: New file.
* cli-out.h (class cli_ui_out) <do_field_string>: Add style
parameter.
* cli-out.c (cli_ui_out::do_table_header)
(cli_ui_out::do_field_int, cli_ui_out::do_field_skip): Update.
(cli_ui_out::do_field_string): Add style parameter. Style the
output.
* breakpoint.c (print_breakpoint_location): Style output.
(update_static_tracepoint): Likewise.
* Makefile.in (SUBDIR_CLI_SRCS): Add cli-style.c.
(HFILES_NO_SRCDIR): Add cli-style.h.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: New file.
* gdb.base/style.c: New file.
When compiling with clang 3.8 (default clang version on Debian
Stretch, the current stable), we get errors like this:
CXX dtrace-probe.o
../../binutils-gdb/gdb/dtrace-probe.c:103:31: error: default initialization of an object of const type 'const dtrace_static_probe_ops' without a user-provided default constructor
const dtrace_static_probe_ops dtrace_static_probe_ops;
^
Silence them by value-initializing those objects. It's not necessary
with other compilers (later clang versions, gcc), but it shouldn't
hurt either.
Given that a target's stratum is a property of the type, and not of an
instance of the type, get rid of to_stratum data field and replace it
with a virtual method.
I.e., when we have e.g., 10 target remote instances active, there's no
need for each of the instances to have their own to_stratum copy.
gdb/ChangeLog:
2018-11-30 Pedro Alves <palves@redhat.com>
* aix-thread.c (aix_thread_target) <aix_thread_target>: Delete.
<stratum>: New override.
* bfd-target.c (aix_thread_target) <aix_thread_target>: Delete.
<stratum>: New override.
* bsd-uthread.c (bsd_uthread_target) <bsd_uthread_target>: Delete.
<stratum>: New override.
* exec.c (exec_target) <exec_target>: Delete.
<stratum>: New override.
* gdbarch-selftests.c (register_to_value_test): Adjust to use the
stratum method instead of the to_stratum field.
* linux-thread-db.c (thread_db_target) <thread_db_target>: Delete.
<stratum>: New override.
(thread_db_target::thread_db_target): Delete.
* make-target-delegates (print_class): Don't print a ctor
declaration. Print a stratum method override declaration.
* process-stratum-target.h (process_stratum_target)
<process_stratum_target>: Delete.
<stratum>: New override.
* ravenscar-thread.c (ravenscar_thread_target)
<ravenscar_thread_target>: Delete.
<stratum>: New override.
* record-btrace.c (record_btrace_target)
<record_btrace_target>: Delete.
<stratum>: New override.
* record-full.c (record_full_base_target)
<record_full_base_target>: Delete.
<stratum>: New override.
* record.c (record_disconnect, record_detach)
(record_mourn_inferior, record_kill): Adjust to use the stratum
method instead of the to_stratum field.
* regcache.c (cooked_read_test, cooked_write_test): Likewise.
* sol-thread.c (sol_thread_target)
<sol_thread_target>: Delete.
<stratum>: New override.
* spu-multiarch.c (spu_multiarch_target)
<spu_multiarch_target>: Delete.
<stratum>: New override.
* target-delegates.c: Regenerate.
* target.c (target_stack::push, target_stack::unpush)
(pop_all_targets_above, pop_all_targets_at_and_above)
(info_target_command, target_require_runnable)
(target_stack::find_beneath): Adjust to use the stratum method
instead of the to_stratum field.
(dummy_target::dummy_target): Delete.
(dummy_target::stratum): New.
(debug_target::debug_target): Delete.
(debug_target::stratum): New.
(maintenance_print_target_stack): Adjust to use the stratum method
instead of the to_stratum field.
* target.h (struct target_ops) <stratum>: New method.
<to_stratum>: Delete.
<is_pushed>: Adjust to use the stratum method
instead of the to_stratum field.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
-fsanitize=address showed a use-after-free in
record_btrace_start_replaying. The bug occurred because
get_thread_current_frame returned a frame_info, but this object was
then invalidated before the return by ~scoped_restore_current_thread.
This patch fixes the problem by renaming get_thread_current_frame and
having it return a frame id.
gdb/ChangeLog
2018-10-23 Tom Tromey <tom@tromey.com>
* record-btrace.c (get_thread_current_frame_id): Rename from
get_thread_current_frame. Return a frame_id.
(record_btrace_start_replaying): Update.
This fixes all the straightforward -Wshadow=local warnings in gdb. A
few standard approaches are used here:
* Renaming an inner (or outer, but more commonly inner) variable;
* Lowering a declaration to avoid a clash;
* Moving a declaration into a more inner scope to avoid a clash,
including the special case of moving a declaration into a loop header.
I did not consider any of the changes in this patch to be particularly
noteworthy, though of course they should all still be examined.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* ctf.c (SET_ARRAY_FIELD): Rename "u32".
* p-valprint.c (pascal_val_print): Split inner "i" variable.
* xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop
header.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in
more inner scope.
* xcoffread.c (read_xcoff_symtab): Rename inner "symbol".
* varobj.c (varobj_update): Rename inner "newobj",
"type_changed".
* valprint.c (generic_emit_char): Rename inner "buf".
* valops.c (find_overload_match): Rename inner "temp".
(value_struct_elt_for_reference): Declare "v" in more inner
scope.
* v850-tdep.c (v850_push_dummy_call): Rename "len".
* unittests/array-view-selftests.c (run_tests): Rename inner
"vec".
* tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop
header.
* tracepoint.c (merge_uploaded_trace_state_variables): Declare
"tsv" in more inner scope.
(print_one_static_tracepoint_marker): Rename inner
"tuple_emitter".
* tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower.
(tic6x_push_dummy_call): Don't redeclare "addr".
* target-float.c: Declare "dto" lower.
* symtab.c (lookup_local_symbol): Rename inner "sym".
(find_pc_sect_line): Rename inner "pc".
* stack.c (print_frame): Don't redeclare "gdbarch".
(return_command): Rename inner "gdbarch".
* s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner
"sp".
* rust-lang.c (rust_internal_print_type): Declare "i" in loop
header.
* rs6000-tdep.c (ppc_process_record): Rename inner "addr".
* riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner
scope.
* remote.c (remote_target::update_thread_list): Don't redeclare
"tp".
(remote_target::process_initial_stop_replies): Rename inner
"thread".
(remote_target::remote_parse_stop_reply): Don't redeclare "p".
(remote_target::wait_as): Don't redeclare "stop_reply".
(remote_target::get_thread_local_address): Rename inner
"result".
(remote_target::get_tib_address): Likewise.
old_inferior_ptid is unused, this is caught by a gcc built from git
recently, not sure about previous versions:
/home/emaisin/src/binutils-gdb/gdb/record-btrace.c: In function ‘frame_info* get_thread_current_frame(thread_info*)’:
/home/emaisin/src/binutils-gdb/gdb/record-btrace.c:1974:10: error: unused variable ‘old_inferior_ptid’ [-Werror=unused-variable]
1974 | ptid_t old_inferior_ptid;
| ^~~~~~~~~~~~~~~~~
gdb/ChangeLog:
* record-btrace.c (get_thread_current_frame): Remove
old_inferior_ptid.
In my multi-target work, I need to add a few more
scoped_restore_current_thread and switch_to_thread calls in some
places, and in some lower-level places I was fighting against the fact
that switch_to_thread reads/refreshes the stop_pc global.
Instead of piling on workarounds, let's just finally eliminate the
stop_pc global. We already have the per-thread
thread_info->suspend.stop_pc field, so it's mainly a matter of using
that more/instead.
gdb/ChangeLog:
2018-06-28 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_suspend_state) <stop_pc>: Extend
comments.
(switch_to_thread_no_regs): Adjust comment.
* infcmd.c (stop_pc): Delete.
(post_create_inferior, info_program_command): Replace references
to stop_pc with references to thread_info->suspend.stop_pc.
* inferior.h (stop_pc): Delete declaration.
* infrun.c (proceed, handle_syscall_event, fill_in_stop_func)
(handle_inferior_event_1, handle_signal_stop)
(process_event_stop_test, keep_going_stepped_thread)
(handle_step_into_function, handle_step_into_function_backward)
(print_stop_location): Replace references to stop_pc with
references to thread_info->suspend.stop_pc.
(struct infcall_suspend_state) <stop_pc>: Delete field.
(save_infcall_suspend_state, restore_infcall_suspend_state):
Remove references to inf_stat->stop_pc.
* linux-fork.c (fork_load_infrun_state): Likewise.
* record-btrace.c (record_btrace_set_replay): Likewise.
* record-full.c (record_full_goto_entry): Likewise.
* remote.c (print_one_stopped_thread): Likewise.
* target.c (target_resume): Extend comment.
* thread.c (set_executing_thread): New.
(set_executing): Use it.
(switch_to_thread_no_regs, switch_to_no_thread, switch_to_thread):
Remove references to stop_pc.
This is more preparation bits for multi-target support.
In a multi-target scenario, we need to address the case of different
processes/threads running on different targets that happen to have the
same PID/PTID. E.g., we can have both process 123 in target 1, and
process 123 in target 2, while they're in reality different processes
running on different machines. Or maybe we've loaded multiple
instances of the same core file. Etc.
To address this, in my WIP multi-target branch, threads and processes
are uniquely identified by the (process_stratum target_ops *, ptid_t)
and (process_stratum target_ops *, pid) tuples respectively. I.e.,
each process_stratum instance has its own thread/process number space.
As you can imagine, that requires passing around target_ops * pointers
in a number of functions where we're currently passing only a ptid_t
or an int. E.g., when we look up a thread_info object by ptid_t in
find_thread_ptid, the ptid_t alone isn't sufficient.
In many cases though, we already have the thread_info or inferior
pointer handy, but we "lose" it somewhere along the call stack, only
to look it up again by ptid_t/pid. Since thread_info or inferior
objects know their parent target, if we pass around thread_info or
inferior pointers when possible, we avoid having to add extra
target_ops parameters to many functions, and also, we eliminate a
number of by ptid_t/int lookups.
So that's what this patch does. In a bit more detail:
- Changes a number of functions and methods to take a thread_info or
inferior pointer instead of a ptid_t or int parameter.
- Changes a number of structure fields from ptid_t/int to inferior or
thread_info pointers.
- Uses the inferior_thread() function whenever possible instead of
inferior_ptid.
- Uses thread_info pointers directly when possible instead of the
is_running/is_stopped etc. routines that require a lookup.
- A number of functions are eliminated along the way, such as:
int valid_gdb_inferior_id (int num);
int pid_to_gdb_inferior_id (int pid);
int gdb_inferior_id_to_pid (int num);
int in_inferior_list (int pid);
- A few structures and places hold a thread_info pointer across
inferior execution, so now they take a strong reference to the
(refcounted) thread_info object to avoid the thread_info pointer
getting stale. This is done in enable_thread_stack_temporaries and
in the infcall.c code.
- Related, there's a spot in infcall.c where using a RAII object to
handle the refcount would be handy, so a gdb::ref_ptr specialization
for thread_info is added (thread_info_ref, in gdbthread.h), along
with a gdb_ref_ptr policy that works for all refcounted_object types
(in common/refcounted-object.h).
gdb/ChangeLog:
2018-06-21 Pedro Alves <palves@redhat.com>
* ada-lang.h (ada_get_task_number): Take a thread_info pointer
instead of a ptid_t. All callers adjusted.
* ada-tasks.c (ada_get_task_number): Likewise. All callers
adjusted.
(print_ada_task_info, display_current_task_id, task_command_1):
Adjust.
* breakpoint.c (watchpoint_in_thread_scope): Adjust to use
inferior_thread.
(breakpoint_kind): Adjust.
(remove_breakpoints_pid): Rename to ...
(remove_breakpoints_inf): ... this. Adjust to take an inferior
pointer. All callers adjusted.
(bpstat_clear_actions): Use inferior_thread.
(get_bpstat_thread): New.
(bpstat_do_actions): Use it.
(bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust
to take a thread_info pointer. All callers adjusted.
(set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint)
(breakpoint_re_set_thread): Use inferior_thread.
* breakpoint.h (struct inferior): Forward declare.
(bpstat_stop_status): Update.
(remove_breakpoints_pid): Delete.
(remove_breakpoints_inf): New.
* bsd-uthread.c (bsd_uthread_target::wait)
(bsd_uthread_target::update_thread_list): Use find_thread_ptid.
* btrace.c (btrace_add_pc, btrace_enable, btrace_fetch)
(maint_btrace_packet_history_cmd)
(maint_btrace_clear_packet_history_cmd): Adjust.
(maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use
inferior_thread.
* cli/cli-interp.c: Include "inferior.h".
* common/refcounted-object.h (struct
refcounted_object_ref_policy): New.
* compile/compile-object-load.c: Include gdbthread.h.
(store_regs): Use inferior_thread.
* corelow.c (core_target::close): Use current_inferior.
(core_target_open): Adjust to use first_thread_of_inferior and use
the current inferior.
* ctf.c (ctf_target::close): Adjust to use current_inferior.
* dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
(dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor):
Take a thread_info pointer instead of a ptid_t.
* dummy-frame.h (dummy_frame_push, dummy_frame_pop)
(dummy_frame_discard, register_dummy_frame_dtor): Take a
thread_info pointer instead of a ptid_t.
* elfread.c: Include "inferior.h".
(elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop):
Use inferior_thread.
* eval.c (evaluate_subexp): Likewise.
* frame.c (frame_pop, has_stack_frames, find_frame_sal): Use
inferior_thread.
* gdb_proc_service.h (struct thread_info): Forward declare.
(struct ps_prochandle) <ptid>: Delete, replaced by ...
<thread>: ... this new field. All references adjusted.
* gdbarch.h, gdbarch.c: Regenerate.
* gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a
'thread' parameter. All implementations and callers adjusted.
* gdbthread.h (thread_info) <set_running>: New method.
(delete_thread, delete_thread_silent): Take a thread_info pointer
instead of a ptid.
(global_thread_id_to_ptid, ptid_to_global_thread_id): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_live_thread_of_process): Delete, replaced by ...
(any_live_thread_of_inferior): ... this new function. All callers
adjusted.
(switch_to_thread, switch_to_no_thread): Declare.
(is_executing): Delete.
(enable_thread_stack_temporaries): Update comment.
<enable_thread_stack_temporaries>: Take a thread_info pointer
instead of a ptid_t. Incref the thread.
<~enable_thread_stack_temporaries>: Decref the thread.
<m_ptid>: Delete
<m_thr>: New.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries, can_access_registers_thread):
Take a thread_info pointer instead of a ptid_t. All callers
adjusted.
* infcall.c (get_call_return_value): Use inferior_thread.
(run_inferior_call): Work with thread pointers instead of ptid_t.
(call_function_by_hand_dummy): Work with thread pointers instead
of ptid_t. Use thread_info_ref.
* infcmd.c (proceed_thread_callback): Access thread's state
directly.
(ensure_valid_thread, ensure_not_running): Use inferior_thread,
access thread's state directly.
(continue_command): Use inferior_thread.
(info_program_command): Use find_thread_ptid and access thread
state directly.
(proceed_after_attach_callback): Use thread state directly.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(exit_inferior): Take an inferior pointer instead of a pid. All
callers adjusted.
(exit_inferior_silent): New.
(detach_inferior): Delete.
(valid_gdb_inferior_id, pid_to_gdb_inferior_id)
(gdb_inferior_id_to_pid, in_inferior_list): Delete.
(detach_inferior_command, kill_inferior_command): Use
find_inferior_id instead of valid_gdb_inferior_id and
gdb_inferior_id_to_pid.
(inferior_command): Use inferior and thread pointers.
* inferior.h (struct thread_info): Forward declare.
(notice_new_inferior): Take a thread_info pointer instead of a
ptid_t. All callers adjusted.
(detach_inferior): Delete declaration.
(exit_inferior, exit_inferior_silent): Take an inferior pointer
instead of a pid. All callers adjusted.
(gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list)
(valid_gdb_inferior_id): Delete.
* infrun.c (follow_fork_inferior, proceed_after_vfork_done)
(handle_vfork_child_exec_or_exit, follow_exec): Adjust.
(struct displaced_step_inferior_state) <pid>: Delete, replaced by
...
<inf>: ... this new field.
<step_ptid>: Delete, replaced by ...
<step_thread>: ... this new field.
(get_displaced_stepping_state): Take an inferior pointer instead
of a pid. All callers adjusted.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Take a thread pointer instead
of a ptid_t. All callers adjusted.
(displaced_step_in_progress, add_displaced_stepping_state): Take
an inferior pointer instead of a pid. All callers adjusted.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Take an inferior pointer
instead of a pid. All callers adjusted.
(displaced_step_prepare_throw, displaced_step_prepare)
(displaced_step_fixup): Take a thread pointer instead of a ptid_t.
All callers adjusted.
(start_step_over): Adjust.
(infrun_thread_ptid_changed): Remove bit updating ptids in the
displaced step queue.
(do_target_resume): Adjust.
(fetch_inferior_event): Use inferior_thread.
(context_switch, get_inferior_stop_soon): Take an
execution_control_state pointer instead of a ptid_t. All callers
adjusted.
(switch_to_thread_cleanup): Delete.
(stop_all_threads): Use scoped_restore_current_thread.
* inline-frame.c: Include "gdbthread.h".
(inline_state) <inline_state>: Take a thread pointer instead of a
ptid_t. All callers adjusted.
<ptid>: Delete, replaced by ...
<thread>: ... this new field.
(find_inline_frame_state): Take a thread pointer instead of a
ptid_t. All callers adjusted.
(skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Take a thread
pointer instead of a ptid_t. All callers adjusted.
* inline-frame.h (skip_inline_frames, step_into_inline_frame)
(inline_skipped_frames, inline_skipped_symbol): Likewise.
* linux-fork.c (delete_checkpoint_command): Adjust to use thread
pointers directly.
* linux-nat.c (get_detach_signal): Likewise.
* linux-thread-db.c (thread_from_lwp): New 'stopped' parameter.
(thread_db_notice_clone): Adjust.
(thread_db_find_new_threads_silently)
(thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take
a thread pointer instead of a ptid_t. All callers adjusted.
* mi/mi-cmd-var.c: Include "inferior.h".
(mi_cmd_var_update_iter): Update to use thread pointers.
* mi/mi-interp.c (mi_new_thread): Update to use the thread's
inferior directly.
(mi_output_running_pid, mi_inferior_count): Delete, bits factored
out to ...
(mi_output_running): ... this new function.
(mi_on_resume_1): Adjust to use it.
(mi_user_selected_context_changed): Adjust to use inferior_thread.
* mi/mi-main.c (proceed_thread): Adjust to use thread pointers
directly.
(interrupt_thread_callback): : Adjust to use thread and inferior
pointers.
* proc-service.c: Include "gdbthread.h".
(ps_pglobal_lookup): Adjust to use the thread's inferior directly.
* progspace-and-thread.c: Include "inferior.h".
* progspace.c: Include "inferior.h".
* python/py-exitedevent.c (create_exited_event_object): Adjust to
hold a reference to an inferior_object.
* python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use
inferior_thread.
* python/py-inferior.c (struct inferior_object): Give the type a
tag name instead of a typedef.
(python_on_normal_stop): No need to check if the current thread is
listed.
(inferior_to_inferior_object): Change return type to
inferior_object. All callers adjusted.
(find_thread_object): Delete, bits factored out to ...
(thread_to_thread_object): ... this new function.
* python/py-infthread.c (create_thread_object): Use
inferior_to_inferior_object.
(thpy_is_stopped): Use thread pointer directly.
(gdbpy_selected_thread): Use inferior_thread.
* python/py-record-btrace.c (btpy_list_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(btpy_insn_or_gap_new): Drop const.
(btpy_list_new): Take a thread pointer instead of a ptid_t. All
callers adjusted.
* python/py-record.c: Include "gdbthread.h".
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
(gdbpy_current_recording): Use inferior_thread.
* python/py-record.h (recpy_record_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_element_object) <ptid>: Delete
field, replaced with ...
<thread>: ... this new field. All users adjusted.
(recpy_insn_new, recpy_func_new): Take a thread pointer instead of
a ptid_t. All callers adjusted.
* python/py-threadevent.c: Include "gdbthread.h".
(get_event_thread): Use thread_to_thread_object.
* python/python-internal.h (struct inferior_object): Forward
declare.
(find_thread_object, find_inferior_object): Delete declarations.
(thread_to_thread_object, inferior_to_inferior_object): New
declarations.
* record-btrace.c: Include "inferior.h".
(require_btrace_thread): Use inferior_thread.
(record_btrace_frame_sniffer)
(record_btrace_tailcall_frame_sniffer): Use inferior_thread.
(get_thread_current_frame): Use scoped_restore_current_thread and
switch_to_thread.
(get_thread_current_frame): Use thread pointer directly.
(record_btrace_replay_at_breakpoint): Use thread's inferior
pointer directly.
* record-full.c: Include "inferior.h".
* regcache.c: Include "gdbthread.h".
(get_thread_arch_regcache): Use the inferior's address space
directly.
(get_thread_regcache, registers_changed_thread): New.
* regcache.h (get_thread_regcache(thread_info *thread)): New
overload.
(registers_changed_thread): New.
(remote_target) <remote_detach_1>: Swap order of parameters.
(remote_add_thread): <remote_add_thread>: Return the new thread.
(get_remote_thread_info(ptid_t)): New overload.
(remote_target::remote_notice_new_inferior): Use thread pointers
directly.
(remote_target::process_initial_stop_replies): Use
thread_info::set_running.
(remote_target::remote_detach_1, remote_target::detach)
(extended_remote_target::detach): Adjust.
* stack.c (frame_show_address): Use inferior_thread.
* target-debug.h (target_debug_print_thread_info_pp): New.
* target-delegates.c: Regenerate.
* target.c (default_thread_address_space): Delete.
(memory_xfer_partial_1): Use current_inferior.
(target_detach): Use current_inferior.
(target_thread_address_space): Delete.
(generic_mourn_inferior): Use current_inferior.
* target.h (struct target_ops) <thread_address_space>: Delete.
(target_thread_address_space): Delete.
* thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread
pointers directly.
(delete_thread_1, delete_thread, delete_thread_silent): Take a
thread pointer instead of a ptid_t. Adjust all callers.
(ptid_to_global_thread_id, global_thread_id_to_ptid): Delete.
(first_thread_of_process): Delete, replaced by ...
(first_thread_of_inferior): ... this new function. All callers
adjusted.
(any_thread_of_process): Rename to ...
(any_thread_of_inferior): ... this, and take an inferior pointer.
(any_live_thread_of_process): Rename to ...
(any_live_thread_of_inferior): ... this, and take an inferior
pointer.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(value_in_thread_stack_temporaries)
(get_last_thread_stack_temporary): Take a thread pointer instead
of a ptid_t. Adjust all callers.
(thread_info::set_running): New.
(validate_registers_access): Use inferior_thread.
(can_access_registers_ptid): Rename to ...
(can_access_registers_thread): ... this, and take a thread
pointer.
(print_thread_info_1): Adjust to compare thread pointers instead
of ptids.
(switch_to_no_thread, switch_to_thread): Make extern.
(scoped_restore_current_thread::~scoped_restore_current_thread):
Use m_thread pointer directly.
(scoped_restore_current_thread::scoped_restore_current_thread):
Use inferior_thread.
(thread_command): Use thread pointer directly.
(thread_num_make_value_helper): Use inferior_thread.
* top.c (execute_command): Use inferior_thread.
* tui/tui-interp.c: Include "inferior.h".
* varobj.c (varobj_create): Use inferior_thread.
(value_of_root_1): Use find_thread_global_id instead of
global_thread_id_to_ptid.
This changes target_ops::beneath from a pointer to a method, and
adjusts all references throughout. The idea here is to make it easier
to change the target stack representation from an intrusive singly
linked list to something else without leaking implementation details
throughout.
The commit does not change the representation yet, that will be done
in a following patch. That is why a new target_ops::m_beneath field
appears here. That new field isn't really documented properly or made
private, simply because it will be removed shortly.
Note that target_ops::beneath() is essentially the same as the current
find_target_beneath routine. The following patch will eliminate the
latter.
gdb/ChangeLog:
2018-06-07 Pedro Alves <palves@redhat.com>
* target.h (target_ops) <beneath>: Now a method. All references
updated.
(target_ops) <m_beneath>: New.
* target.c (target_ops::beneath): New.
* corelow.c: Adjust all references to target_ops::beneath.
* linux-thread-db.c: Likewise.
* make-target-delegates: Likewise.
* record-btrace.c: Likewise.
* record-full.c: Likewise.
* remote.c: Likewise.
* target.c: Likewise.
* target-delegates.c: Regenerate.
The tp_t typedef is no longer used and can be removed.
ChangeLog
2018-05-29 Tom Tromey <tom@tromey.com>
* record-btrace.c (tp_t): Remove typedef. Don't declare VEC.
This updates the help text in record-btrace.c to conform to GNU
standards.
2018-04-29 Tom Tromey <tom@tromey.com>
* record-btrace.c (_initialize_record_btrace): Update help text.
Currently, to open a target, with "target TARGET_NAME", GDB finds the
target_ops instance with "TARGET_NAME" as short name, and then calls
its target_ops::open virtual method. In reality, there's no actual
target/name lookup, a pointer to the target_ops object was associated
with the "target TARGET_NAME" command at add_target time (when GDB is
initialized), as the command's context.
This creates a chicken and egg situation. Consider the case of
wanting to open multiple remote connections. We want to be able to
have one remote target_ops instance per connection, but, if we're not
connected yet, so we don't yet have an instance to call target->open()
on...
This patch fixes this by separating out common info about a target_ops
to a separate structure (shortname, longname, doc), and changing the
add_target routine to take a reference to such an object instead of a
pointer to a target_ops, and a pointer to a factory function that is
responsible to open an instance of the corresponding target when the
user types "target TARGET_NAME".
-extern void add_target (struct target_ops *);
+extern void add_target (const target_info &info, target_open_ftype *func);
I.e. this factory function replaces the target_ops::open virtual
method.
For static/singleton targets, nothing changes, the target_open_ftype
function pushes the global target_ops instance on the target stack.
At target_close time, the connection is tor down, but the global
target_ops object remains live.
However, targets that support being open multiple times will make
their target_open_ftype routine allocate a new target_ops instance on
the heap [e.g., new remote_target()], and push that on the stack. At
target_close time, the new object is destroyed (by the
target_ops::close virtual method).
Both the core target and the remote targets will support being open
multiple times (others could/should too, but those were my stopping
point), but not in this patch yet. We need to get rid of more globals
first before that'd be useful.
Native targets are somewhat special, given find_default_run_target &
friends. Those routines also expect to return a target_ops pointer,
even before we've open the target. However, we'll never need more
than one instance of the native target, so we can assume/require that
native targets are global/simpletons, and have the backends register a
pointer to the native target_ops. Since all native targets inherit
inf_child_target, we can centralize that registration. See
add_inf_child_target, get_native_target/set_native_target and
find_default_run_target.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Use
add_inf_child_target.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Use
add_inf_child_target.
* aix-thread.c (aix_thread_target_info): New.
(aix_thread_target) <shortname, longname, doc>: Delete.
<info>: New.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Use
add_inf_child_target.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Use
add_inf_child_target.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Use
add_inf_child_target.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Use
add_inf_child_target.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Use
add_inf_child_target.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Use
add_inf_child_target.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Use
add_inf_child_target.
* arm-linux-nat.c (_initialize_arm_linux_nat): Use
add_inf_child_target.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Use
add_inf_child_target.
* bfd-target.c (target_bfd_target_info): New.
(target_bfd) <shortname, longname, doc>: Delete.
<info>: New.
* bsd-kvm.c (bsd_kvm_target_info): New.
(bsd_kvm_target) <shortname, longname, doc>: Delete.
<info>: New.
(bsd_kvm_target::open): Rename to ...
(bsd_kvm_target_open): ... this. Adjust.
* bsd-uthread.c (bsd_uthread_target_info): New.
(bsd_uthread_target) <shortname, longname, doc>: Delete.
<info>: New.
* corefile.c (core_file_command): Adjust.
* corelow.c (core_target_info): New.
(core_target) <shortname, longname, doc>: Delete.
<info>: New.
(core_target::open): Rename to ...
(core_target_open): ... this. Adjust.
* ctf.c (ctf_target_info): New.
(ctf_target) <shortname, longname, doc>: Delete.
<info>: New.
(ctf_target::open): Rename to ...
(ctf_target_open): ... this.
(_initialize_ctf): Adjust.
* exec.c (exec_target_info): New.
(exec_target) <shortname, longname, doc>: Delete.
<info>: New.
(exec_target::open): Rename to ...
(exec_target_open): ... this.
* gdbcore.h (core_target_open): Declare.
* go32-nat.c (_initialize_go32_nat): Use add_inf_child_target.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Use
add_inf_child_target.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Use
add_inf_child_target.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Use
add_inf_child_target.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Use
add_inf_child_target.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Use
add_inf_child_target.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Use
add_inf_child_target.
* i386-linux-nat.c (_initialize_i386_linux_nat): Use
add_inf_child_target.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Use
add_inf_child_target.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Use
add_inf_child_target.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Use
add_inf_child_target.
* inf-child.c (inf_child_target_info): New.
(inf_child_target::info): New.
(inf_child_open_target): Remove 'target' parameter. Use
get_native_target instead.
(inf_child_target::open): Delete.
(add_inf_child_target): New.
* inf-child.h (inf_child_target) <shortname, longname, doc, open>:
Delete.
<info>: New.
(add_inf_child_target): Declare.
(inf_child_open_target): Declare.
* linux-thread-db.c (thread_db_target_info): New.
(thread_db_target) <shortname, longname, doc>: Delete.
<info>: New.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Use
add_inf_child_target.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Use
add_inf_child_target.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Use
add_inf_child_target.
* m88k-bsd-nat.c (_initialize_m88kbsd_nat): Use
add_inf_child_target.
* make-target-delegates (print_class): Adjust.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Use
add_inf_child_target.
* mips-linux-nat.c (_initialize_mips_linux_nat): Use
add_inf_child_target.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Use
add_inf_child_target.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Use
add_inf_child_target.
* nto-procfs.c (nto_native_target_info): New.
(nto_procfs_target_native) <shortname, longname, doc>:
Delete.
<info>: New.
(nto_procfs_target_info): New.
(nto_procfs_target_procfs) <shortname, longname, doc>:
Delete.
<info>: New.
(init_procfs_targets): Adjust.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Use
add_inf_child_target.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Use
add_inf_child_target.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Use
add_inf_child_target.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Use
add_inf_child_target.
* ravenscar-thread.c (ravenscar_target_info): New.
(ravenscar_thread_target) <shortname, longname, doc>:
Delete.
<info>: New.
* record-btrace.c (record_btrace_target_info):
(record_btrace_target) <shortname, longname, doc>: Delete.
<info>: New.
(record_btrace_target::open): Rename to ...
(record_btrace_target_open): ... this. Adjust.
* record-full.c (record_longname, record_doc): New.
(record_full_base_target) <shortname, longname, doc>: Delete.
<info>: New.
(record_full_target_info): New.
(record_full_target): <shortname>: Delete.
<info>: New.
(record_full_core_open_1, record_full_open_1): Update comments.
(record_full_base_target::open): Rename to ...
(record_full_open): ... this.
(cmd_record_full_restore): Update.
(_initialize_record_full): Update.
* remote-sim.c (remote_sim_target_info): New.
(gdbsim_target) <shortname, longname, doc>: Delete.
<info>: New.
(gdbsim_target::open): Rename to ...
(gdbsim_target_open): ... this.
(_initialize_remote_sim): Adjust.
* remote.c (remote_doc): New.
(remote_target_info): New.
(remote_target) <shortname, longname, doc>: Delete.
<info>: New.
(extended_remote_target_info): New.
(extended_remote_target) <shortname, longname, doc>: Delete.
<info>: New.
(remote_target::open_1): Make static. Adjust.
* rs6000-nat.c (_initialize_rs6000_nat): Use add_inf_child_target.
* s390-linux-nat.c (_initialize_s390_nat): Use
add_inf_child_target.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Use
add_inf_child_target.
* sol-thread.c (thread_db_target_info): New.
(sol_thread_target) <shortname, longname, doc>: Delete.
<info>: New.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Use
add_inf_child_target.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Use
add_inf_child_target.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Use
add_inf_child_target.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Use
add_inf_child_target.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Use
add_inf_child_target.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Use
add_inf_child_target.
* spu-linux-nat.c (_initialize_spu_nat): Use
add_inf_child_target.
* spu-multiarch.c (spu_multiarch_target_info): New.
(spu_multiarch_target) <shortname, longname, doc>: Delete.
<info>: New.
* target-delegates.c: Regenerate.
* target.c: Include <unordered_map>.
(target_ops_p): Delete.
(DEF_VEC_P(target_ops_p)): Delete.
(target_factories): New.
(test_target_info): New.
(test_target_ops::info): New.
(open_target): Adjust to use target_factories.
(add_target_with_completer): Rename to ...
(add_target): ... this. Change prototype. Register target_info
and open callback in target_factories. Register target_info in
command context instead of target_ops.
(add_target): Delete old implementation.
(add_deprecated_target_alias): Change prototype. Adjust.
(the_native_target): New.
(set_native_target, get_native_target): New.
(find_default_run_target): Use the_native_target.
(find_attach_target, find_run_target): Simplify.
(target_ops::open): Delete.
(dummy_target_info): New.
(dummy_target::shortname, dummy_target::longname)
(dummy_target::doc): Delete.
(dummy_target::info): New.
(debug_target::shortname, debug_target::longname)
(debug_target::doc): Delete.
(debug_target::info): New.
* target.h (struct target_info): New.
(target_ops::~target_ops): Add comment.
(target_ops::info): New.
(target_ops::shortname, target_ops::longname, target_ops::doc): No
longer virtual. Implement in terms of target_info.
(set_native_target, get_native_target): Declare.
(target_open_ftype): New.
(add_target, add_target_with_completer)
(add_deprecated_target_alias): Change prototype.
(test_target) <shortname, longname, doc>: Delete.
<info>: New.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Use
add_inf_child_target.
* tracefile-tfile.c (tfile_target_info): New.
(tfile_target) <shortname, longname, doc>: Delete.
<info>: New.
(tfile_target::open): Rename to ...
(tfile_target_open): ... this.
(_initialize_tracefile_tfile): Adjust.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Use
add_inf_child_target.
* windows-nat.c (_initialize_windows_nat): Use
add_inf_child_target.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Use
add_inf_child_target.
After the previous target_ops/C++ patches are all squashed and merged,
this one can go in separately.
This patch adjusts all the target methods to return bool instead of int
when they're returning a boolean.
gdb/ChangeLog:
2018-05-02 Pedro Alves <palves@redhat.com>
* target.h (target_ops)
<stopped_by_sw_breakpoint, supports_stopped_by_sw_breakpoint,
stopped_by_hw_breakpoint, supports_stopped_by_hw_breakpoint,
stopped_by_watchpoint, have_continuable_watchpoint,
stopped_data_address, watchpoint_addr_within_range,
can_accel_watchpoint_condition, can_run, thread_alive,
has_all_memory, has_memory, has_stack, has_registers,
has_execution, can_async_p, is_async_p, supports_non_stop,
always_non_stop_p, can_execute_reverse, supports_multi_process,
supports_enable_disable_tracepoint,
supports_disable_randomization, supports_string_tracing,
supports_evaluation_of_breakpoint_conditions,
can_run_breakpoint_commands, filesystem_is_local,
can_download_tracepoint, get_trace_state_variable_value,
set_trace_notes, get_tib_address, use_agent, can_use_agent,
record_is_replaying, record_will_replay,
augmented_libraries_svr4_read>: Adjust to return bool.
* aarch64-linux-nat.c: All implementations adjusted.
* aix-thread.c: All implementations adjusted.
* arm-linux-nat.c: All implementations adjusted.
* breakpoint.c: All implementations adjusted.
* bsd-kvm.c: All implementations adjusted.
* bsd-uthread.c: All implementations adjusted.
* corelow.c: All implementations adjusted.
* ctf.c: All implementations adjusted.
* darwin-nat.c: All implementations adjusted.
* darwin-nat.h: All implementations adjusted.
* exec.c: All implementations adjusted.
* fbsd-nat.c: All implementations adjusted.
* fbsd-nat.h: All implementations adjusted.
* gnu-nat.c: All implementations adjusted.
* gnu-nat.h: All implementations adjusted.
* go32-nat.c: All implementations adjusted.
* ia64-linux-nat.c: All implementations adjusted.
* inf-child.c: All implementations adjusted.
* inf-child.h: All implementations adjusted.
* inf-ptrace.c: All implementations adjusted.
* inf-ptrace.h: All implementations adjusted.
* linux-nat.c: All implementations adjusted.
* linux-nat.h: All implementations adjusted.
* mips-linux-nat.c: All implementations adjusted.
* nto-procfs.c: All implementations adjusted.
* ppc-linux-nat.c: All implementations adjusted.
* procfs.c: All implementations adjusted.
* ravenscar-thread.c: All implementations adjusted.
* record-btrace.c: All implementations adjusted.
* record-full.c: All implementations adjusted.
* remote-sim.c: All implementations adjusted.
* remote.c: All implementations adjusted.
* s390-linux-nat.c: All implementations adjusted.
* sol-thread.c: All implementations adjusted.
* spu-multiarch.c: All implementations adjusted.
* target-delegates.c: All implementations adjusted.
* target.c: All implementations adjusted.
* target.h: All implementations adjusted.
* tracefile-tfile.c: All implementations adjusted.
* tracefile.c: All implementations adjusted.
* tracefile.h: All implementations adjusted.
* windows-nat.c: All implementations adjusted.
* x86-linux-nat.h: All implementations adjusted.
* x86-nat.h: All implementations adjusted.
Markus Metzger
Tom Tromey
Tom Tromey
Andrew Burgess
Simon Marchi
Christian Biesinger
Pedro Alves
Joel Brobecker
Tom de Vries
Alan Modra
Philippe Waroquiers
Dave Murphy
Simon Marchi