* utils.c: <readline/readline.h> instead of "readline/readline.h".
* configure.in (TERM_LIB): Search for the appropriate term library
on the host system.
* configure: Regenerated.
* Makefile.in (TERMCAP): Set based on autoconf check.
* config/*/*.mh: Don't override TERMCAP setting.
* config/m68k/tm-m68k.h (NUM_FREGS): m68k-linux patch.
Added NUM_FREGS macro.
* config/m68k/xm-linux.h: m68k-linux patch. New file.
* config/m68k/tm-linux.h: m68k-linux patch. New file.
* config/m68k/nm-linux.h: m68k-linux patch. New file.
* config/m68k/linux.mt: m68k-linux patch. New file.
* config/m68k/linux.mh: m68k-linux patch. New file.
* gdbserver/low-linux.c: m68k-linux patch. Added an ifdef
that checks the value of __GLIBC to decide whether or
not to include sys/reg.h.
* m68klinux-nat.c: m68k-linux patch. New file. Note
both m68k-tdep.c and m68klinux-nat.c contain definitions
for supply_gregset and supply_fpregset. The definitions
in m68k-tdep.c are valid is USE_PROC_FS is defined. Otherwise,
the definitions in m68klinux-nat.c will be used. This is a
bit of a hack. The supply_* routines do not belong in
*_tdep.c files. But, there are several lynx ports that currently
depend on these definitions.
* configure.tgt: m68k-linux patch. Added m68*-*-linux*
gdb_target.
* configure.host: m68k-linux patch. Added m68*-*-linux*
gdb_host.
* Makefile.in: m68k-linux patch. Added compile line for
m68klinux-nat.o
without NAT_FILE definition, configure will assume that GDB cannot
run native.
* config/m68k/nm-delta68.h (KERNEL_U_SIZE): New macro.
* delta68-nat.c (kernel_u_size): New function.
* configure.in: Add more header files to AC_CHECK_HEADERS.
* configure: Regenerated.
* command.c: Include wait.h or sys/wait.h if present.
* inftarg.c: Ditto.
* core-aout.c: Include ptrace.h or sys/ptrace.h if present, based
on autoconf test.
* infptrace.c: Ditto.
* expprint.c: Include ctype.h for isprint prototype.
* i386aix-nat.c: Include sys/reg.h if autoconf says it is present.
* i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if
present, based on autoconf test.
* utils.c: Include curses.h and term.h if present.
(puts_debug): Change 'carriage_return' local variable to return_p
to avoid name clash.
* config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE,
determine it with autoconf.
* config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it
with autoconf.
* config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it
with autoconf.
* config/i386/nm-i386v.h: Ditto.
* config/i386/nm-symmetry.h: Ditto.
* config/m88k/xm-cxux.h: Ditto.
* config/m88k/xm-dgux.h: Ditto.
* config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary.
* config/m68k/nm-delta68.h: Removed.
* config/m68k/xm-sun3os4.h: Remove malloc declarations, they
are handled via autoconf now.
* remote.c (remote_ops, extended_remote_ops): Replace static
forward declaration by moving the static definition to the top of
the file, for old K&R compilers.
* tracepoint.c (collect_symbol, trace_start_command):
Replace ANSI string concatenation with K&R compatible simple string.
* m68k/tm-delta68.h (EXTRACT_RETURN_VALUE): Type argument for
`REGISTER_CONVERT_TO_VIRTUAL is `TYPE', not
`REGISTER_VIRTUAL_TYPE (FP0_REGNUM)';
(STORE_RETURN_VALUE): Ditto, and offset for `write_register_bytes'
is `REGISTER_BYTE (FP0_REGNUM)', not `FP0_REGNUM'.
(FRAME_NUM_ARGS): New macro.
* m68k/tm-news.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Ditto.
* delta68-nat.c (clear_insn_cache): New function, forgotten in previous
patch.
* m68k/tm-delta68.h (CPLUS_MARKER): Macro deleted.
(EXTRACT_STRUCT_VALUE_ADDRESS): Macro defined.
(EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Macros modified
because floating-point values return via %fp0.
(CLEAR_INSN_CACHE): New macro.
* m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL): Macro fixed
to use DOUBLEST.
(REGISTER_CONVERT_TO_RAW): Ditto.
* infptrace.c (child_xfer_memory): If CLEAR_INSN_CACHE is defined,
call it after having written in child process's memory.
* inflow.c (PROCESS_GROUP_TYPE): Macro defined if HAVE_TERMIO.
(gdb_has_a_terminal, terminal_ours_1): Functions fixed for HAVE_TERMIO.
files).
* (SUBDIRS): Remove mswin.
* Change procedure for creating init.c. Speeds things up quite a
bit.
* config.in configure configure.in: Check for select, poll.
* Check for OSF header files before including hpux-thread.o.
* Don't configure doc or testsuite when building under MSVC.
* findvar.c value.h (read_register_pid write_register_pid): Make
global. Needed for hppa-tdep.c.
* (supply_register): Don't set pid to inferior_pid when supplying
registers.
* hppa-tdep.c (saved_pc_after_call): frame_saved_pc ->
FRAME_SAVED_PC.
* (frame_saved_pc): Change name to hppa_frame_saved_pc.
* (hppa_pop_frame): Don't use a pid of 0 with target_write_pc.
Use write_pc instead, which uses the correct pid.
* (target_read_pc target_write_pc): Use read/write_register_pid
instead of read/write_register to preserve the pid passed in.
* inftarg.c (child_can_run): Add flag child_suppress_run to allow
hpux-threads.c to override this as a runnable target.
* config/pa/nm-hppah.h: Define target_new_objfile and
target_pid_to_str.
* config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc
instead of frame_saved_pc.
* config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb.
* config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since
we can't easily determine the start file bounds with ELF.
* config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb.
* hpux-thread.c: New file for HPUX/OSF thread support.
* osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h
RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h
cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h
cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h
cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF
thread support.
SIGTRAMP_END.
* config/i386/tm-i386os9k.h (SIGTRAMP_START, SIGTRAMP_END):
Define with dummy pc arg.
* config/m68k/tm-nbsd.h: Ditto.
* doc/gdbint.texinfo: Document that SIGTRAMP_START and
SIGTRAMP_END are macros that take an single argument.
mswin/libwingdb.a and remote-wiggler.o.
* breakpoint.c (breakpoint_here_p): Clean up bp enabled test.
* (breakpoint_inserted_here_p): New func, just like
breakpoint_here_p, except it's honest. Honestly.
* breakpoint.h: Proto for above.
start-sanitize-gdbtk
* configure configure.in: Add host *windows* to list of hosts
that don't support GDBtk.
end-sanitize-gdbtk
* configure configure.in: Add mswin to configdirs if host is
i[3456]86-*-windows.
* core-aout.c (fetch_core_registers register_addr) gdbcore.h:
Change all vars that can contain addresses to type CORE_ADDR.
* findvar.c (supply_register): Allow val to be NULL. This means
that regno is unsupported.
* (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms
just call pid forms with inferior_pid so that there's only once
place to hack PC's and such.
* infrun.c (proceed): Don't skip breakpoints if user changed PC.
* remote-wiggler.c: New file. Support for BDM interface from
Macraigor Systems.
* serial.c: Enhance serial logging capability. Add hex and octal
output modes (set remotelogbase {hex|octal|ascii}. Also log
breaks, timeouts, errors, and eofs.
* serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper
function so that we can log breaks. Don't export serial_logfile
or serial_logfp.
* top.c (execute_command): Don't test for serial_logfp here.
Just call serial_log_comand, and let serial.c sort it out.
* valops.c (value_of_variable): Don't attempt to establish frames
for static and global variables. This makes things work a bit
better if the stack or frame pointer is trashed.
* config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o.
* config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack
misaligned stacks during function calls.
Thu Jul 25 19:41:31 1996 Fred Fish <fnf@cygnus.com>
for details about these changes. I was going to include the complete
entry in the checkin message but it was apparently so large it caused
cvs to dump core.
and MMALLOC_CHECK macros, and add comment indicating how host dependent
makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
to use it but to not do heap corruption checking.
* gdbserver/Makefile.in: Ditto.
* utils.c (init_malloc): Replace warning() use with direct call of
fprintf_unfiltered, since current_target has not yet been set and thus
we cannot use warning(). If we try to use mmcheck and it fails,
suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
defined. Other small mmalloc related cleanups.
* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
Remove obsolete defines.
* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
* config/rs6000/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix.mh (MMALLOC_DISABLE):
* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
* config/mips/mipsm3.mh (MMALLOC_DISABLE):
* config/mips/decstation.mh (MMALLOC_DISABLE):
* config/m88k/cxux.mh (MMALLOC_DISABLE):
* config/i386/i386mk.mh (MMALLOC_DISABLE):
* config/i386/i386m3.mh (MMALLOC_DISABLE):
* config/i386/i386gnu.mh (MMALLOC_DISABLE):
Use MMALLOC_CFLAGS instead.
* NEWS: Add Alpha Linux as a new native configuration.
* mdebugread.c (parse_symbol): When we find a malloc() symbol with
return type VOID, assume no debugging info is available for that
object file and patch the return value into VOID *. Otherwise,
operations requiring an implicit call to malloc() will fail.
* infrun.c (wait_for_inferior): The criterion to detect entering a
sigtramp handler is now: (a) the current pc is inside a sigtramp
handler, (b) the previous pc is not in a sigtramp handler, and (c)
the current stack pointer is "inner" than the old one. Condition
(c) is new to avoid mistaking a return from a signal handler into
sigtramp as a new sigtramp invocation.
* dcache.c (struct dcache_block): Declare addr as CORE_ADDR. An
int may not be big enough to hold an address.
(dcache_hit): Ditto.
(dcache_peek_byte): Fix indentation.
* configure.in (alpha-*-linux*): Add target.
* configure: Rebuild
* config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro.
(SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto.
(DYNAMIC_SIGTRAMP_OFFSET): Ditto.
(SIGCONTEXT_ADDR): Ditto.
(FRAME_PAST_SIGTRAMP_FRAME): Ditto.
* config/alpha/alpha-linux.mh: New file.
* config/alpha/alpha-linux.mt: Ditto.
* config/alpha/nm-linux.h: Ditto.
* config/alpha/tm-alphalinux.h: Ditto.
* config/alpha/xm-alphalinux.h: Ditto.
* config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h.
* config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to
xm-alphaosf.h.
* config/alpha/alpha-osf2.mh: Ditto.
* blockframe.c (find_pc_partial_function): Pass PC to
SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems
that detect sigtramp code via designated code sequences (as is the
case for Linux/Alpha, for example).
* config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END
to ignore new PC argument.
* config/m68k/tm-hp300bsd.h: Ditto.
* config/vax/tm-vax.h: Ditto.
* alpha-tdep.c (alpha_linux_sigtramp_offset): New function.
(alpha_osf_skip_sigtramp_frame): Ditto.
(push_sigtramp_desc): Ditto.
(alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract
sigcontext address from frame.
(alpha_saved_pc_after_call): When in sigtramp, use
alpha_frame_saved_pc() instead of read-register().
(after_prologue): When inside a dynamically generated sigtramp
function, there is no prologue, so return address of first
instruction.
(alpha_in_prologue): Fix typo in comment.
(find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine
whether we're inside a dynamicaly generated sigtramp function. If
so, create and push and appropriate procedure descriptor.
(alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain
the frame past a sigtramp frame (if the current frame is indeed a
sigtramp function).
(init_extra_frame_info): Don't read next frame register off of
stack-pointer when inside a dynamiccaly generated sigtramp.
(alpha_pop_frame): Also unlink and destroy procedure descriptors
created for dynamically generated sigtramp functions.
* alpha-nat.c: When compiling under Linux, include <asm/reg.h> and
<alpha/ptrace.h> instead of <machine/reg.h>
* config.in: Regenerate with autoheader.
* configure: Regenerate with autoconf.
* inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL
if it is actually defined.
(gdb_setpgid): Use HAVE_SETPGID.
* ch-exp.c: Change include of <string.h> to "gdb_string.h".
* c-exp.y: Ditto.
* f-exp.y: Ditto.
* m2-exp.y: Ditto.
* c-exp.y: Include <ctype.h>.
* serial.c: Ditto.
* config/m68k/nm-news.h: Add typedef for pid_t which is
apparently missing from <sys/types.h>. Enclose entire
file in NM_NEWS_H ifndef and define when included.
* config/mips/nm-news-mips.h: Ditto.
* config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL,
REGISTER_CONVERT_TO_RAW): Change name of temporary variable.
here from config/i386/xm-i386mach.h, fix name.
* config/i386/nm-sun386.h: Ditto, from config/i386/xm-sun386.h.
* config/i386/nm-ptx4.h (CHILD_PREPARE_TO_STORE): Move to
here from config/i386/xm-ptx4.h.
* config/i386/nm-ptx4.h: Ditto, from config/i386/xm-ptx.h.
* config/i386/nm-symmetry.h: Ditto, from config/i386/xm-symmetry.h.
* config/m68k/nm-sun3.h: Ditto, from config/m68k/xm-sun3.h.
more housekeeping
Also force HAVE_MMAP to be defined since autoconf is currently broken
for detecting a working mmap under hpux.
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS): Tweak MMAP_BASE_ADDRESS
to a better value suggested by Jeffrey A Law (law@cygnus.com).
build config.h, add empty definitions to mk.tmp.
(powerpc-apple-macos): Make it work.
* mpw-make.sed: New file, sed commands to translate Unix makefile
into MPW syntax.
* mpw-make.in: Remove.
* mac-gdb.r: New file, was macgdb.r, renamed for consistency
with other tools, now includes cfrg resource.
* macgdb.r: Remove.
* config/m68k/xm-mpw.h: Remove most of contents, replace with
include of include/mpw/mpw.h.
error message to work with pre-ansi compilers.
(monitor_load_srec): reduced length of s-records from 128 to 32
bytes so download is more reliable with the rom68k monitor.
* rom68k-rom.c: Added trailing space to prompt string.
* config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
* config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
Removed.
* defs.h, config/{xm-lynx.h, xm-nbsd.h},
config/i386/{xm-i386bsd.h, xm-linux.h},
config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
(PSIGNAL_IN_SIGNAL_H): Removed.
Jason Molenda
Stan Shebs
Jeff Law
Edith Epstein
Andrew Cagney
Fred Fish
Michael Snyder
Peter Schauer
Stu Grossman
J.T. Conklin