Ulrich Weigand
c2250ad1c4
* target.h (struct target_ops): New member to_thread_architecture.
...
(target_thread_architecture): New macro.
* target.c (update_current_target): Inherit to_thread_architecture.
(default_thread_architecture): New function.
(debug_to_thread_architecture): New function.
(setup_target_debug): Handle to_thread_architecture.
* regcache.h (get_thread_arch_regcache): New.
* regcache.c (struct regcache_list): New data type.
(current_regcache): Hold regcache list instead of single regcache.
(current_thread_ptid, current_thread_arch): New static variables.
(get_thread_arch_regcache): New function.
(get_thread_regcache): Use it. Call target_thread_architecture.
(regcache_thread_ptid_changed): Update to current_regcache changes.
(registers_changed): Likewise. Reset current_thread_arch and
current_thread_ptid.
* remote.c (remote_wait): Access target registers in target_gdbarch.
* linux-nat.c (linux_nat_do_thread_registers): Likewise.
* proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* solib-svr4.c (enable_break): Likewise.
(svr4_relocate_main_executable): Likewise.
2009-07-02 17:06:44 +00:00
Daniel Jacobowitz
edb3359dff
gdb/
...
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 00:20:24 +00:00
Pedro Alves
c35b149212
* target.h (struct target_ops): Make to_has_all_memory,
...
to_has_memory, to_has_stack, to_has_registers and to_has_execution
methods instead of variables.
(target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
(target_has_registers_1, target_has_execution_1): Declare
functions.
(target_has_all_memory): Rewrite to call target_has_all_memory_1.
(target_has_memory): Rewrite to call target_has_memory_1.
(target_has_stack): Rewrite to call target_has_all_stack_1.
(target_has_registers): Rewrite to call target_has_registers_1.
(target_has_execution): Rewrite to call target_has_execution_1.
(default_child_has_all_memory, default_child_has_memory)
(default_child_has_stack, default_child_has_registers)
(default_child_has_execution): Declare.
(target_mark_running, target_mark_exited): Delete declarations.
* target.c (default_child_has_all_memory,
default_child_has_memory, default_child_has_stack,
default_child_has_registers, default_child_has_execution): New.
(target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
target_has_registers_1, target_has_execution_1): New.
(add_target): Default the to_has_all_memory, to_has_all_memory,
to_has_memory, to_has_stack, to_has_registers and to_has_execution
callbacks to return 0.
(update_current_target): Do not inherit to_has_all_memory,
to_has_memory, to_has_stack, to_has_registers or to_has_execution.
(target_mark_running, target_mark_exited): Delete.
(memory_xfer_partial): Adjust.
(target_read_memory, target_write_memory, target_search_memory):
Dispatch to the the top-most target, not the flattened
current_target.
(target_info): Adjust.
(init_dummy_target): Install return_zero as callback for
to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
to_has_execution.
(set_maintenance_target_async_permitted): Use have_live_inferiors
instead of target_has_execution.
* target-memory.c (target_write_memory_blocks): Dispatch memory
writes to the the top-most target, not the flattened
current_target.
* breakpoint.c (insert_breakpoints): Don't check for
target_has_execution here.
(update_global_location_list): Check if there are live inferiors
to debug instead of target_has_execution.
* infcmd.c (kill_command, detach_command): Check if there are
inferiors instead of target_has_execution.
* inferior.h (have_live_inferiors): Declare.
* inferior.c (have_live_inferiors): New.
* infrun.c (normal_stop): Don't check for target_has_execution to
finish the thread states.
* thread.c (is_thread_state, is_stopped, is_exited, is_running)
(any_running, is_executing): Remove checks for
target_has_execution.
* top.c (kill_or_detach): Don't try to kill core inferiors.
(quit_target): Don't check for target_has_execution.
* corelow.c (core_has_memory, core_has_stack, core_has_registers):
New.
(init_core_ops): Install core_has_memory, core_has_stack and
core_has_registers.
* exec.c (exec_has_memory): New.
(init_exec_ops): Install exec_has_memory.
* remote.c (remote_add_inferior): Don't call target_mark_running.
(remote_start_remote): Don't call target_mark_exited or call
target_mark_running.
(remote_open_1): Use have_inferiors instead of
target_has_execution. Don't use target_mark_exited.
(init_remote_ops): Install deafult_child_has_all_memory,
default_child_has_memory, default_child_has_stack,
default_child_has_registers, default_child_has_execution.
* bsd-kvm.c (bsd_kvm_return_one): New.
(bsd_kvm_add_target): Register bsd_kvm_return_one as
to_has_memory, to_has_stack and to_has_registers callbacks.
* remote-m32r-sdi.c (m32r_return_one): New.
(init_m32r_ops): Register it.
* inf-child.c (inf_child_target): Adjust to register
default_child_has_all_memory, default_child_has_memory,
default_child_has_stack, default_child_has_registers,
default_child_has_execution callbacks.
* gnu-nat.c (init_gnu_ops): Likewise.
* go32-nat.c (init_go32_ops): Likewise.
* hpux-thread.c (init_hpux_thread_ops): Likewise.
* monitor.c (init_base_monitor_ops): Likewise.
* nto-procfs.c (init_procfs_ops): Likewise.
* remote-mips.c (_initialize_remote_mips): Likewise.
* windows-nat.c (init_windows_ops): Likewise.
* remote-sim.c (gdbsim_create_inferior): Don't use
target_mark_running or target_mark_exited.
(gdbsim_mourn_inferior): Don't call target_mark_exited.
(init_gdbsim_ops): Adjust to register
default_child_has_all_memory, default_child_has_memory,
default_child_has_stack, default_child_has_registers,
default_child_has_execution callbacks.
* linux-nat.c (linux_nat_xfer_partial): If reading memory, and
there's no inferior selected, defer to a lower stratum.
2009-06-07 16:46:48 +00:00
Pedro Alves
07b82ea5f9
* target.c: Include "exec.h".
...
(update_current_target): Don't inherit to_sections or
to_sections_end.
(target_get_section_table): New.
(target_section_by_addr): Fetch the section table from the passed
in target.
(memory_xfer_partial): Handle unmapped overlay sections before
anything else. Get the overlay mapped address here. Adjust to
use section_table_xfer_memory_partial.
(get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
instead of TARGET_OBJECT_MEMORY.
(target_resize_to_sections): Delete.
(remove_target_sections): Adjust to remove target sections from
`current_target_sections', and use resize_section_table.
* target.h (struct target_ops) <to_sections, to_sections_end>:
Remove fields.
<to_get_section_table>: New method.
(xfer_memory, print_section_info): Delete declarations.
(struct target_section_table): New type.
(target_get_section_table): Declare.
(target_resize_to_sections): Delete declaration.
(remove_target_sections): Delete declaration.
* bfd-target.c (target_bfd_xfer_partial): Get the section table
from to_data.
(target_bfd_get_section_table): New.
(target_bfd_xclose): Adjust.
(target_bfd_reopen): Store the section table in the to_data field.
* corelow.c (core_data): New.
(core_close): Adjust to release core_data and its sections.
(core_open): Allocate core_data, and build its target sections
table.
(deprecated_core_resize_section_table): New.
(core_files_info): Pass core_data to print_section_info.
(core_xfer_partial): Adjust to use
section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
(init_core_ops): Do not install a deprecated_xfer_memory callback
anymore.
* solib.c (update_solib_list): Add the shared library sections
to the current target sections table.
* exec.c (current_target_sections_1): New global.
(current_target_sections): New global.
(exec_close_1): New function, refactored from exec_close. Remove
the exec_bfd's sections from the current target sections table.
Adjust to not use to_sections.
(exec_close): Remove all target sections. Call exec_close_1.
(exec_file_clear): Use exec_close_1 instead of unpushing the
target.
(exec_file_attach): Likewise. Adjust to not use to_sections. Add
exec_bfd's sections to the current target sections table. Don't
push the exec_ops target here.
(resize_section_table): New.
(add_target_sections): New.
(remove_target_sections): Moved here.
(section_table_xfer_memory): Adjust to implement the xfer_partial
interface, and rename to...
(section_table_xfer_memory_partial): ... this, replacing the
current function of that same name.
(exec_get_section_table): New.
(exec_xfer_partial): New.
(xfer_memory): Delete.
(print_section_info): Replace the target_ops parameter by a
target_section_table parameter.
(exec_files_info, set_section_command, exec_set_section_address):
Adjust to use the current sections table.
(init_exec_ops): Do not register a deprecated_xfer_memory
callback. Register to_xfer_partial and to_get_section_table
callbacks.
* infrun.c (handle_inferior_event): Update comments around
solib_add.
* rs6000-nat.c (xcoff_relocate_core): Adjust to use
deprecated_core_resize_section_table.
* exec.h (resize_section_table): Declare.
(section_table_xfer_memory_partial): Add const char * argument.
(remove_target_sections): Declare here.
(add_target_sections): Declare.
(print_section_info): Declare here.
* gdbcore.h (deprecated_core_resize_section_table): Declare.
2009-06-03 18:50:36 +00:00
Pedro Alves
0542c86dbb
* target.h (struct section_table): Rename to ...
...
(struct target_section): ... this.
* exec.c: Adjust all references.
* exec.h: Adjust all references.
* nto-tdep.c: Adjust all references.
* nto-tdep.h: Adjust all references.
* ppc-linux-tdep.c: Adjust all references.
* rs6000-nat.c: Adjust all references.
* s390-tdep.c: Adjust all references.
* solib-darwin.c: Adjust all references.
* solib-frv.c: Adjust all references.
* solib-irix.c: Adjust all references.
* solib-null.c: Adjust all references.
* solib-osf.c: Adjust all references.
* solib-pa64.c: Adjust all references.
* solib-som.c: Adjust all references.
* solib-sunos.c: Adjust all references.
* solib-svr4.c: Adjust all references.
* solib-target.c: Adjust all references.
* solib.c: Adjust all references.
* solist.h: Adjust all references.
* symfile.c: Adjust all references.
* symfile.h: Adjust all references.
* target.c: Adjust all references.
2009-05-22 23:49:14 +00:00
Pedro Alves
d9d2d8b6c0
* linux-nat.c (linux_nat_terminal_inferior)
...
(linux_nat_terminal_ours): Don't check sync_execution.
* remote.c (remote_terminal_inferior, remote_terminal_ours):
Don't check sync_execution. Update comments.
* target.c (target_terminal_inferior): New.
* target.h (target_terminal_inferior): Delete macro, and declare
as function.
* event-top.c (async_disable_stdin): Make idempotent. Don't give
the target the terminal here.
* inflow.c (terminal_ours_1): Don't return early without setting
`terminal_is_ours'.
2009-05-21 16:00:14 +00:00
Pedro Alves
47608cb1ac
* target.h (TARGET_WNOHANG): New.
...
* target.c (target_wait): Add `options' argument. Adjust.
(struct target_ops) <to_wait>: Add `options' argument.
(target_wait): Add `options' argument.
* infrun.c (wait_for_inferior): Pass 0 as options to
target_wait (blocking wait).
(fetch_inferior_event): Pass TARGET_WNOHANG as options to
target_wait.
* fork-child.c (startup_inferior): Pass 0 as options to
target_wait (blocking wait).
* linux-nat.c (linux_nat_create_inferior): Remove async masking.
(linux_nat_wait_1): Add `target_options' argument. Use it instead
of checking on target_can_async_p.
(linux_nat_wait): Add `target_options' argument. Adjust.
* remote.c (remote_wait_ns): Add `options' argument. Adjust to
check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
(remote_wait_as): Add `options' argument. Adjust to check on
TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
a blocking wait, keep waiting until an interesting event comes
out.
(remote_wait): Add `options' argument. Don't loop here if the
target is in async mode, and a blocking wait has been requested.
* top.c (deprecated_target_wait_hook): Add `options' argument.
* linux-thread-db.c (thread_db_wait): Add `options' argument, and
pass it down to the layer beneath.
* inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
* record.c (record_beneath_to_wait): Add `options' argument.
(record_wait): Add `options' argument, and pass it down to the
layer beneath.
* bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
* darwin-nat.c (darwin_wait): Likewise.
* defs.h (deprecated_target_wait_hook): Likewise.
* gnu-nat.c (gnu_wait): Add `options' argument.
* go32-nat.c (go32_wait): Likewise.
* hpux-thread.c (hpux_thread_wait): Add `options' argument, and
pass it down to the layer beneath.
* inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
* monitor.c (monitor_wait): Likewise.
* nto-procfs.c (procfs_wait): Likewise.
* remote-mips.c (mips_wait): Add `options' argument.
* remote-sim.c (gdbsim_wait): Likewise.
* rs6000-nat.c (rs6000_wait): Add `options' argument.
* sol-thread.c (sol_thread_wait): Add `options' argument, and pass
it down to the layer beneath.
* spu-linux-nat.c (spu_child_wait): Add `options' argument.
* windows-nat.c (windows_wait): Likewise.
* tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
2009-05-21 15:48:42 +00:00
Pedro Alves
2567c7d9cc
* breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
...
(update_global_location_list): Use gdbarch_has_global_breakpoints
instead of gdbarch_has_global_solist and
target_supports_multi_process.
* dicos-tdep.c (dicos_init_abi): Set
gdbarch_has_global_breakpoints.
* gdbarch.sh (has_global_solist): Update comment.
(has_global_breakpoints): New.
* remote.c (remote_start_remote): Use
gdbarch_has_global_breakpoints instead of
gdbarch_has_global_solist.
* target.c (target_detach): Use gdbarch_has_global_breakpoints
instead of gdbarch_has_global_solist.
* infcmd.c (attach_command): Use gdbarch_has_global_solist instead
of target_supports_multi_process.
2009-05-19 00:23:49 +00:00
Pierre Muller
d92524f1ee
Unify target macros.
...
* target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
(target_stoppped_by_watchpoint): New macro.
(HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
(target_have_steppable_watchpoint): New macro.
(HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
(target_have_continuable_watchpoint): New macro.
(TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
(target_can_use_hardware_watchpoint): New macro.
(TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
(target_region_ok_for_hw_watchpoint): New macro.
* breakpoint.c (update_watchpoint): Use new macros.
(bpstat_alloc): Likewise.
(create_breakpoint): Likewise.
(watch_command_1): Likewise.
(can_use_hardware_watchpoint): Likewise.
(do_enable_breakpoint): Likewise.
* infrun.c (handle_inferior_event): Adapt to new macros.
* mips-tdep.c (mips_gdbarch_init): Update comments.
* procfs.c (procfs_set_watchpoint): Update comment.
(procfs_insert_watchpoint): Adapt to new macros.
* remote-m32r-sdi.c (m32r_stop):
* remote-mips.c (mips_remove_breakpoint):
* target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
(debug_to_stopped_by_watchpoint): Likewise.
2009-05-11 11:13:09 +00:00
Joel Brobecker
efbd6e753f
* target.c (target_mourn_inferior): Call bfd_cache_close_all
...
after having executed the target mourn_inferior routine.
2009-04-14 16:48:07 +00:00
Joel Brobecker
7d85a9c0e3
Add a target_ops parameter to the to_kill method in struct target_ops.
...
* target.h (struct target_ops): Add a "target_ops *" parameter to
method to_kill.
(target_kill): Remove macro. Add declaration.
* target.c (debug_to_kill): Delete, no longer necessary.
(target_kill): New function.
(update_current_target): Stop inheriting the to_kill method.
Do not de_fault it to no_process either.
(setup_target_debug): Do not set current_target.to_kill.
* gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
accordingly.
2009-03-17 19:28:09 +00:00
Hui Zhu
9e2f0ad4e0
2009-02-25 Hui Zhu <teawater@gmail.com>
...
* cli/cli-script.c (define_command): Add _() to query.
* gnu-nat.c (inf_validate_task_sc): Ditto.
* infcmd.c (kill_if_already_running): Ditto.
(jump_command): Ditto.
(attach_command): Ditto.
* inflow.c (kill_command): Ditto.
* infrun.c (handle_command): Ditto.
* maint.c (maintenance_dump_me): Ditto.
* memattr.c (mem_delete_command): Ditto.
* monitor.c (monitor_interrupt_query): Ditto.
* nto-procfs.c (interrupt_query): Ditto.
* printcmd.c (undisplay_command): Ditto.
* remote-mips.c (mips_kill): Ditto.
* remote.c (interrupt_query): Ditto.
* solib-irix.c (irix_open_symbol_file_object): Ditto.
* solib-osf.c (osf_open_symbol_file_object): Ditto.
* solib-pa64.c (pa64_open_symbol_file_object): Ditto.
* solib-som.c (som_open_symbol_file_object): Ditto.
* solib-svr4.c (open_symbol_file_object): Ditto.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
* target.c (kill_or_be_killed): Ditto.
* tracepoint.c (delete_trace_command): Ditto.
* top.c (quit_confirm): Add _() to s that will be used
in query.
2009-02-25 02:14:23 +00:00
Pedro Alves
28439f5ef7
* corelow.c (get_core_registers): Adjust.
...
(core_file_thread_alive): Rename to...
(core_thread_alive): ... this.
(core_pid_to_str): Try gdbarch_core_pid_to_str first.
(init_core_ops): Adjust.
(coreops_suppress_target): Delete.
(_initialize_corelow): Unconditionally add core_ops.
* procfs.c: Include "inf-child.h".
(procfs_ops): Delete.
(init_procfs_ops): Delete. Reimplement as...
(procfs_target): ... this, inheriting from inf-child.
(procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
(procfs_prepare_to_store): Delete.
(procfs_store_registers, procfs_resume): Adjust.
(procfs_open): Delete.
(procfs_suppress_run): Delete.
(procfs_can_run): Delete.
(procfs_mourn_inferior): Adjust.
(procfs_init_inferior): Add target_ops parameter. Adjust.
(procfs_create_inferior): Don't pass procfs_init_inferior to
fork_inferior. Instead call it after fork_inferior returns.
(procfs_find_new_threads): Adjust.
(_initialize_procfs): Adjust to use procfs_target instead of
init_procfs_ops.
* sol-thread.c (orig_core_ops, sol_core_ops): Delete.
(lwp_to_thread): Use target_thread_alive.
(sol_thread_open): Delete.
(sol_thread_attach): Delete.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers): Adjust
to use find_target_beneath.
(sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
(sol_thread_xfer_partial): Adjust to use find_target_beneath.
(sol_thread_files_info, sol_thread_kill_inferior): Delete.
(check_for_thread_db): New.
(sol_thread_notice_signals, sol_thread_create_inferior): Delete.
(sol_thread_new_objfile): Call check_for_thread_db.
(sol_thread_mourn_inferior): Adjust to use find_target_beneath.
(sol_thread_can_run): Delete.
(sol_thread_alive): Adjust to use find_target_beneath.
(sol_thread_stop): Delete.
(rw_common): Use target_write_memory or target_read_memory.
(ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
(ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
(solaris_pid_to_str): Remove check for libthread_db initialization
failing.
(sol_find_new_threads): Remove check for libthread_db
initialization failing, or for an invalid inferior_ptid. Adjust
to use find_target_beneath.
(sol_core_open, sol_core_close, sol_core_detach,
sol_core_files_info, sol_find_memory_regions,
sol_make_note_section, ignore): Delete.
(init_sol_thread_ops): Make it a thread_stratum target. Remove
unneeded callback settings.
(init_sol_core_ops): Delete.
(_initialize_sol_thread): No longer call init_sol_core_ops, set
procfs_suppress_run, or hack with core_ops.
* target.h (struct target_ops): Add a target_ops * parameter to
to_resume, to_fetch_registers, to_store_registers, to_thread_alive
and to_find_new_threads.
(target_fetch_registers, target_store_registers)
(target_thread_alive, target_find_new_threads): Redeclare as
function.
* target.c (update_current_target): Do not inherit or de_fault
to_resume, to_fetch_registers, to_store_registers,
to_thread_alive, to_find_new_threads.
(target_resume): Adjust.
(target_thread_alive, target_find_new_threads): New.
(debug_to_resume, debug_to_fetch_registers): Delete.
(target_fetch_registers): New.
(debug_to_store_registers): Delete.
(target_store_registers): New.
(debug_to_thread_alive, debug_to_find_new_threads): Delete.
(setup_target_debug): Adjust.
* gdbcore.h (core_ops): Delete declaration.
* inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
* gdbarch.sh (core_pid_to_str): New gdbarch callback.
* gdbarch.h, gdbarch.c: Regenerate.
* sol2-tdep.c: Include "inferior.h".
(sol2_core_pid_to_str): New.
* sol2-tdep.h (sol2_core_pid_to_str): Declare.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
* i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2009-02-23 00:03:50 +00:00
Pedro Alves
2c0b251b29
2008-02-21 Pedro Alves <pedro@codesorcery.com>
...
Silence a few -Wmissing-prototypes warnings.
PR build/9877:
* amd64-nat.c: Include "amd64-nat.h".
* fork-child.c (_initialize_fork_child): Ditto.
* gcore.c (_initialize_gcore): Ditto.
* inf-ptrace.c: Include "inf-ptrace.h".
(inf_ptrace_store_registers): Make it static.
* linux-nat.c (linux_nat_terminal_ours): Make it static.
(_initialize_linux_nat): Declare before definition.
* linux-tdep.c: Include "linux-tdep.h".
* linux-thread-db.c (_initialize_thread_db): Declare before
definition.
* proc-service.c (_initialize_proc_service): Ditto.
* remote.c (remote_send_printf): Make it static.
* solib.c: Include "solib.h".
* symfile-mem.c (_initialize_symfile_mem): Declare before
definition.
* ada-lang.c (ada_la_decode, ada_match_name)
(ada_suppress_symbol_printing, ada_is_array_type)
(ada_value_ptr_subscript, ada_array_length)
(ada_to_static_fixed_value): Make them static.
(_initialize_ada_language): Declare before definition.
* ada-tasks.c (ada_get_task_number, ada_get_environment_task)
(ada_task_list_changed, ada_new_objfile_observer): Make them
static.
(_initialize_tasks): Declare before definition.
* addrmap.c (_initialize_addrmap): Declare before definition.
* auxv.c (default_auxv_parse): Make it static.
* bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
them static.
* breakpoint.c (remove_sal): Add line break.
(expand_line_sal_maybe): Make it static.
* cp-name-parser.y: Include "cp-support.h".
* cp-valprint.c (cp_find_class_member): Make it static.
* eval.c (value_f90_subarray): Ditto.
* exceptions.c (print_any_exception): Ditto.
* findcmd.c (_initialize_mem_search): Declare before definition.
* frame.c (frame_observer_target_changed): Make it static.
* gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
* inf-child.c: Include "inf-child.h".
* inferior.h (valid_inferior_id): Rename to ...
(valid_gdb_inferior_id): ... this.
* infrun.c (infrun_thread_stop_requested, siginfo_make_value):
Make them static.
* jv-lang.c (java_language_arch_info): Make it static.
* m2-typeprint.c (m2_get_discrete_bounds): Ditto.
* osdata.c (info_osdata_command): Make it static.
* regcache.c (regcache_observer_target_changed): Make it static.
* reverse.c (_initialize_reverse): Declare before definition.
* stabsread.c (cleanup_undefined_types_noname)
(cleanup_undefined_types_1): Make them static.
* symfile.c (place_section): Make it static.
* symtab.c (find_pc_sect_psymtab_closer): Make it static.
* target-descriptions.c (_initialize_target_descriptions): Declare
before definition.
* target.c (default_get_ada_task_ptid, find_default_can_async_p)
(find_default_is_async_p, find_default_supports_non_stop): Make
them static.
(target_supports_non_stop): Add prototype.
(dummy_pid_to_str): Make it static.
* utils.c (_initialize_utils): Declare before definition.
* ada-exp.y (_initialize_ada_exp): Declare before definition.
* solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
* target.h (struct target_ops): Add a prototype to the
to_can_execute_reverse callback.
* macroscope.c (_initialize_macroscope): Declare before definition.
* cp-namespace.c (_initialize_cp_namespace): Declare before definition.
* python/python.c (_initialize_python): Declare before definition.
* tui/tui-command.c: Include "tui/tui-command.h".
* tui/tui-data.c (init_content_element, init_win_info): Make them
static.
* tui/tui-disasm.c: Include "tui/tui-disasm.h".
* tui/tui-interp.c (_initialize_tui_interp): Declare before
definition.
* tui/tui-layout.c: Include "tui/tui-layout.h".
(_initialize_tui_layout): Declare before definition.
* tui/tui-regs.c: Include "tui/tui-regs.h".
(tui_display_reg_element_at_line): Make it static.
(_initialize_tui_regs): Declare before definition.
* tui/tui-stack.c (_initialize_tui_stack): Declare before
definition.
* tui/tui-win.c: Include "tui/tui-win.h".
(_initialize_tui_win): Declare before definition.
(tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
* tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
(tui_get_cmd_list): Add a prototype.
* tui/tui-windata.c: Include tui-windata.h.
* tui/tui-wingeneral.c (box_win): Make it static.
* cli/cli-logging.c (show_logging_command): Make it static.
(_initialize_cli_logging): Declare before definition.
* mi/mi-common.c (_initialize_gdb_mi_common): Declare before
definition.
2009-02-21 16:14:50 +00:00
Pedro Alves
117de6a924
* linux-nat.c (linux_nat_wait): Adjust.
...
(linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
* linux-nat.h (thread_db_init): Delete declaration.
* linux-thread-db.c (target_beneath): Delete.
(thread_db_init): Delete.
(thread_db_detach): Use find_target_beneath.
(thread_db_wait): Adjust interface. Use find_target_beneath.
(thread_db_mourn_inferior): Use find_target_beneath.
(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
(thread_db_async_mask): Delete.
(thread_db_pid_to_str): Adjust interface. Use
find_target_beneath.
(thread_db_get_thread_local_address): Adjust interface. Use
find_target_beneath.
(init_thread_db_ops): Delete references to delete functions.
* target.c (update_current_target): Don't inherit or default
to_wait. Don't inherit to_pid_to_str and
to_get_thread_local_address.
(target_translate_tls_address): Look for a pushed target that
implements to_get_thread_local_address, and use it instead of
checking for target_get_thread_local_address_p.
(target_wait, target_pid_to_str): Reimplement as functions.
(dummy_pid_to_str): New.
(init_dummy_target): Register it.
(debug_to_wait): Delete.
* target.h (struct target_ops): Make to_wait, to_pid_to_str and
to_get_thread_local_address accept a pointer to struct target_ops.
(target_wait): Delete macro, and declare as function.
(target_pid_to_str): Likewise.
(target_get_thread_local_address)
(target_get_thread_local_address_p): Delete.
(noprocess): Add NORETURN and ATTR_NORETURN tags.
* inf-ptrace.c (inf_ptrace_wait): Adjust.
(inf_ptrace_pid_to_str): New.
(inf_ptrace_target): Use inf_ptrace_pid_to_str.
* aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
* bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
* bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
Adjust.
* corelow.c (core_pid_to_str): Adjust.
* darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
* dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
* gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
* go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
* hpux-thread.c (hpux_thread_wait): Adjust.
* inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
* monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
* nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
* procfs.c (procfs_pid_to_str): Adjust.
* remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
* remote-mips.c (mips_wait): Adjust.
* remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
* remote.c (remote_wait, remote_pid_to_str)
(remote_get_thread_local_address): Adjust.
* rs6000-nat.c (rs6000_wait): Adjust.
* sol-thread.c (procfs_pid_to_str): Adjust declaration.
(sol_thread_wait, solaris_pid_to_str): Adjust.
* spu-linux-nat.c (spu_child_wait): Adjust.
* windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2009-02-06 22:21:26 +00:00
Pedro Alves
739ef7fb25
* target.c (target_get_osdata): Check for equal or higher than
...
process_stratum, not dummy_stratum.
2009-02-06 02:08:48 +00:00
Pedro Alves
6d097e655a
* remote.c (extended_remote_can_run): Delete.
...
(init_remote_ops): Don't register it.
* target.c (target_get_osdata): Don't check for target_can_run.
Instead any target that has already been pushed, otherwise
fallback to the default run target..
2009-02-06 01:23:00 +00:00
Pedro Alves
947b8855e4
* target.c (target_create_inferior, target_detach)
...
(target_mourn_inferior, target_attach, target_close): Do target
debug output.
(debug_to_attach, debug_to_detach, debug_to_create_inferior)
(debug_to_mourn_inferior, debug_to_close): Delete.
(setup_target_debug): Adjust.
2009-02-06 00:27:58 +00:00
Pedro Alves
611041afff
* target.h (target_stopped_data_address_p): Delete declaration,
...
and don't define as macro.
* target.c (target_stopped_data_address_p): Delete.
2009-02-05 23:30:33 +00:00
Doug Evans
f00150c95d
* target.h (target_waitstatus_to_string): Declare.
...
* target.c (target_waitstatus_to_string): New function. Copied from
debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
TARGET_WAITKIND_NO_HISTORY.
(debug_to_wait): Call it.
* infrun.c (wait_for_inferior): If debug_infrun, print result of
target_wait.
(fetch_inferior_event): Ditto.
2009-02-01 23:31:03 +00:00
Joel Brobecker
53b715628b
* target.c (target_xfer_partial): Use host_address_to_string to
...
print the address of readbuf and writebuf. Cast the address of
elements inside the myaddr buffer into intptr_t.
(deprecated_debug_xfer_memory): Use paddress to print memaddr.
Cast the address of elements inside the myaddr buffer into
intptr_t.
2009-01-11 13:23:42 +00:00
Joel Brobecker
0fb0cc7590
Updated copyright notices for most files.
2009-01-03 05:58:08 +00:00
Tristan Gingold
d26b535418
2008-12-16 Tristan Gingold <gingold@adacore.com>
...
* inflow.c: Remove old_sigio, handle_sigio, old_fcntl_flags,
set_sigio_trap, clear_sigio_trap definitions.
* inferior.h: Remove set_sigio_trap and clear_sigio_trap declarations.
* inf-ptrace.c (inf_ptrace_wait): Remove call to set_sigio_trap
and clear_sigio_trap.
* inf-ttrace.c (inf_ttrace_wait): Ditto.
* linux-nat.c (linux_nat_wait): Ditto.
* spu-linux-nat.c (spu_child_wait): Ditto.
* rs6000-nat.c (rs6000_wait): Ditto.
* target.c: Remove target_activity_function and target_activity_fd.
* target.h: Remove target_activity_function and target_activity_fd
declarations.
2008-12-16 11:15:58 +00:00
Vladimir Prus
07e059b5a9
Implement -list-thread-groups --available
...
* Makefile.in (XMLFILES): Add osdata.dtd.
(SFILES): Add osdata.c.
(COMMON_OBS): Add osdata.o.
* linux-nat.c: Include pwd.h, sys/types.h, gdb_dirent.h and xml-support.h.
(linux_nat_xfer_osdata): New function.
(linux_xfer_partial): Handle TARGET_OBJECT_OSDATA.
* osdata.c: New file.
* osdata.h: New file.
* remote.c (PACKET_qXfer_osdata): New packet enum.
(remote_protocol_features): Add "qXfer:osdata:read".
(remote_read_qxfer): Handle TARGET_OBJECT_OSDATA.
(extended_remote_can_run): New.
(init_extended_remote_ops): Set to_can_run to
extended_remote_can_run.
(_initialize_remote): Add packet config command for
"qXfer:osdata:read".
* xml-support.c (obstack_xml_printf): New function.
* xml-support.h (obstack_xml_printf): Declare.
* target.c (target_get_osdata): New function.
* target.h (enum target_object): Add TARGET_OBJECT_OSDATA.
(target_os_data): Declare.
* features/osdata.dtd: New file.
* mi/mi-main.c (mi_list_thread_groups): Handle the --available
option.
2008-12-02 07:57:38 +00:00
Vladimir Prus
136d6dae62
Kill pthread_ops_hack
...
* target.h (struct target_ops): Make to_attach, to_detach,
to_create_inferior and to_mourn_inferior accept a pointer
to struct target_ops.
(target_attach, target_create_inferior, target_create_inferior):
Convert from macros to function. Find the right target to
invoke a method of.
(find_default_attach, find_default_create_inferior): New parameter
ops.
* corefile.c (core_file_command): Pass target to to_detach.
* corelow.c (core_detach): Add 'ops' parameter.
* fork-child.c (fork_inferior): Return the pid. Allow
init_trace_fun to be NULL.
* inf-ptrace (ptrace_ops_hack): Remove.
(inf_ptrace_him): Remove, moving all logic into....
(inf_ptrace_create_inferior): ... here. Push the target
passed as parameter.
(inf_ptrace_mourn_inferior, inf_ptrace_attach, inf_ptrace_detach):
Push/pop target passed as parameter, no ptrace_ops_hack.
(inf_ptrace_target): Don't remember result.
* inferior.h (fork_inferior): Adjust prototype.
* linux-nat.c (linux_nat_create_inferior, linux_nat_attach)
(linux_nat_detach, linux_nat_mourn_inferior): New parameter ops.
Pass it to linux_ops target.
* linux-thread-db.c (thread_db_detach, thread_db_mourn_inferior):
New parameter ops. Pass it to the target beneath.
* remote.c (remote_mourn, extended_remote_mourn, remote_detach)
(extended_remote_create_inferior): New parameter ops. Pass it
further.
* target.c (debug_to_attach, debug_to_detach)
(debug_to_mourn_inferior): New parameter ops.
(target_create_inferior): New.
(update_current_target): Do not inherit to_attach, to_detach,
to_create_inferiour, to_mourn_inferior. Do not default
to_detach and to_mourn_inferior.
(target_detach): Find the right target to use.
(target_mourn_inferior): New.
(find_default_attach, find_default_create_inferior): New parameter
ops. Pass the found target when calling its method.
(init_dummy_target): Provide fallback definition of to_detach.
(target_attach): New.
(debug_to_attach, debug_to_detach, debug_to_create_inferior)
(debug_to_mourn_inferiour): New parameter ops.
* aix-thread.c: Adjust.
* bsd-uthread.c: Adjust.
* gnu-nat.c: Adjust.
* go32-nat.c: Adjust.
* hpux-thread.c: Adjust.
* inf-ttrace.c: Ajust.
* monitor.c: Adjust.
* nto-procfs.c: Adjust.
* procfs.c: Adjust.
* remote-m32r-sdi.c: Adjust.
* remote-mips.c: Adjust.
* remote-sim.c: Adjust.
* rs6000-nat.c: Adjust.
* sol-thread.c: Adjust.
* win32-nat.c: Adjust.
* dec-thread.c: Adjust.
2008-11-09 11:27:18 +00:00
Pedro Alves
50c71eaf0e
* remote.c (remote_start_remote): If the solib list is global,
...
fetch libraries and insert breakpoints after connecting.
* infcmd.c (post_create_inferior): If the solist is shared between
inferiors, no need to refetch it on every new inferior.
(detach_command): If the shared library list is shared between
inferiors, then don't clear it on every inferior detach.
* gdbarch.sh (has_global_solist): New.
* i386-dicos-tdep.c (i386_dicos_init_abi): Set
gdbarch_has_global_solist.
* target.c (target_pre_inferior): If the shared library list is
shared between inferiors, then don't clear it here, neither
invalidate the memory regions or clear the target description.
(target_detach): If the shared library list is shared between
inferiors, then don't remove breakpoints from the target here.
(target_disconnect): Comment.
* solib.c (update_solib_list): Check for null_ptid.
* breakpoint.c (insert_breakpoints, update_global_location_list):
If the shared library list is shared between inferiors, insert
breakpoints even if there's no execution.
(breakpoint_init_inferior): If the shared library list is shared
between inferiors, don't delete breakpoints or mark them
uninserted here.
* gdbarch.c, gdbarch.h: Regenerate.
2008-11-03 14:01:27 +00:00
Pedro Alves
8a30517206
* target.h (struct target_ops) <to_supports_multi_process>: New
...
field.
(target_supports_multi_process): New define.
* target.c (update_current_target): Inherit and de_fault
to_supports_multi_process.
* infcmd.c (attach_command): Allow attaching to multiple processes
if the target supports it.
(detach_command): If the target claims there is still execution,
don't clear the thread list.
* remote.c (remote_supports_multi_process): New.
(init_remote_ops): Register remote_supports_multi_process.
2008-10-27 12:43:24 +00:00
Joel Brobecker
0ef643c89c
* target.h (struct target_ops): Add new field to_get_ada_task_ptid.
...
(target_get_ada_task_ptid): New macro.
* target.c (default_get_ada_task_ptid): New function.
(update_current_target): Inherit field default_get_ada_task_ptid.
(update_current_target): Make default_get_ada_task_ptid the default
value for field to_get_ada_task_ptid.
* ada-lang.h (struct task_control_block): Delete. Never used.
(struct task_ptid, task_ptid_t, struct task_entry, task_list):
Likewise.
(struct ada_task_info): New.
(ada_task_is_alive, ada_find_printable_frame)
(ada_task_list_iterator_ftype, iterate_over_live_ada_tasks): Add
declarations.
(ada_build_task_list): Update prototype.
(init_task_list, ada_is_exception_breakpoint): Remove prototypes.
* ada-lang.c (ada_find_printable_frame): Make non-static.
* ada-tasks.c: New file.
* Makefile.in (SFILES): Add ada-tasks.c.
(COMMON_OBS): Add ada-tasks.o.
* linux-thread-db.c (thread_db_find_thread_from_tid)
(thread_db_get_ada_task_ptid): New functions.
(init_thread_db_ops): Set thread_db_ops.to_get_ada_task_ptid.
2008-10-22 19:45:05 +00:00
Michael Snyder
b2175913c5
2008-10-17 Michael Snyder <msnyder@vmware.com>
...
Target interface for reverse debugging.
* target.h (enum target_waitkind):
Add new wait event, TARGET_WAITKIND_NO_HISTORY.
(struct target_ops): New method to_can_execute_reverse.
(target_can_execute_reverse): New macro.
* target.c (update_current_target): Inherit to_can_execute_reverse.
Remote interface for reverse debugging.
* remote.c (remote_can_execute_reverse): New target method.
(remote_resume): Check for reverse exec direction, and send
appropriate command to target.
(remote_wait_as): Check target response for NO_HISTORY status.
Also check for empty reply (target doesn't understand "bs" or "bc).
(remote_vcont_resume): Jump out if attempting reverse execution.
Event handling interface for reverse debugging.
* infrun.c (execution_direction): New state variable.
(enum inferior_stop_reason): Add NO_HISTORY reason.
(handle_inferior_event): Handle TARGET_WAITKIND_NO_HISTORY.
Handle stepping over a function call in reverse.
Handle stepping thru a line range in reverse.
Handle setting a step-resume breakpoint in reverse.
Handle stepping into a function in reverse.
Handle stepping between line ranges in reverse.
(print_stop_reason): Print reason for NO_HISTORY.
(step_into_function): Rename to handle_step_into_function.
(handle_step_into_function_backward): New function.
(set_exec_direction_func, show_exec_direction_func): New funcs.
(proceed): No need to singlestep over a breakpoint
when resuming in reverse.
* inferior.h (enum exec_direction_kind): New enum.
(execution_direction): Export new execution state variable.
* breakpoint.c (make_breakpoint_silent): New function.
* breakpoint.h (make_breakpoint_silent): Export.
* infcmd.c (finish_command): Check for reverse exec direction.
(finish_backward): New function, handle finish cmd in reverse.
User interface for reverse execution.
* Makefile.in (reverse.c): New file.
* reverse.c: New file. User interface for reverse execution.
2008-10-17 19:43:47 +00:00
Pedro Alves
63c715c603
Remove dead code.
...
* breakpoint.c (show_breakpoint_hit_counts): Delete.
(print_one_breakpoint_location): Adjust.
(breakpoint_clear_ignore_counts): Delete.
* breakpoint.h (breakpoint_clear_ignore_counts): Remove
declaration.
* target.c (generic_mourn_inferior): Don't clear ignore
counts (never reached).
2008-10-14 20:49:02 +00:00
Pedro Alves
c8d104ad69
* remote.c (remote_open_1): Move acknowledging any pending ack,
...
querying supported features, activating noack mode, finding the
target description, enabling extended remote, and checking remote
symbols from here ...
(remote_start_remote): ... to here.
(remote_open_1): Don't pop the target if it is already gone.
* target.c (unpush_target): Check for the dummy target.
2008-10-09 03:24:51 +00:00
Pedro Alves
181e7f9393
Remove the attach_flag global, and make it per-inferior.
...
* inferior.h (attach_flag): Delete.
(inferior_process): Declare.
* solib.c (update_solib_list): Adjust.
* gnu-nat.c (gnu_create_inferior, gnu_attach): Adjust.
* inf-ptrace.c (inf_ptrace_detach): Adjust.
(inf_ptrace_files_info): Get it from the current inferior.
* inf-ttrace.c (inf_ttrace_attach): Adjust.
(inf_ttrace_files_info): Get it from the current
inferior.
* inflow.c (terminal_inferior, terminal_ours_1, set_sigint_trap)
(clear_sigint_trap): Get it from the current process.
* remote.c (extended_remote_attach_1)
(extended_remote_create_inferior_1): Adjust.
* top.c (quit_confirm, quit_target): Get it from the current inferior.
* procfs.c (do_detach): Adjust.
(procfs_wait): Get it from the event inferior.
(procfs_files_info): Get it from the current inferior.
* nto-procfs.c (procfs_files_info): Likewise.
(procfs_attach): Adjust. Set the attach_flag here.
(do_attach): Don't set it here.
(procfs_detach): Don't clear it.
(procfs_mourn_inferior): Don't clear it.
* solib-osf.c (osf_solib_create_inferior_hook): Adjust.
* target.c (attach_flag): Delete.
(generic_mourn_inferior): Don't clear it.
* win32-nat.c (get_win32_debug_event): Get it from the event
process.
(do_initial_win32_stuff): Add attaching argument. Set attach_flag
in the inferior accordingly.
(win32_attach): Don't set the attach_flag here. Pass 1 to
do_intial_win32_stuff.
(win32_files_info): Get it from the current inferior.
(win32_create_inferior): Dont clear attach_flag here. Pass 0 to
do_intial_win32_stuff.
2008-09-22 15:21:30 +00:00
Pedro Alves
7f9f62ba18
* gnu-nat.c (gnu_attach): Add process to inferiors table.
...
(gnu_detach): Remove it.
* go32-nat.c (go32_create_inferior): Add process to gdb's inferior
table.
* inf-ptrace.c (inf_ptrace_follow_fork): Delete and add inferiors
to inferior table accordingly.
(inf_ptrace_attach): Add new process to inferior table.
(inf_ptrace_detach): Remove it.
* inf-ttrace.c (inf_ttrace_follow_fork): Delete and add inferiors
to inferior table accordingly.
(inf_ttrace_attach): Add process to inferior table.
(inf_ttrace_detach): Remove it.
* linux-fork.c (init_fork_list): Delete any left over inferior.
(linux_fork_mourn_inferior, detach_fork_command): Also delete
processes from inferior list.
* monitor.c (monitor_open): Add process to inferior list.
(monitor_close): Remove it.
* nto-procfs.c (procfs_attach): Add process to inferior list.
Find threads after pushing the target.
(procfs_detach): Remove process from inferior list.
(procfs_create_inferior): Add process to inferior list.
* procfs.c (procfs_detach): Remove process from inferior list.
(do_attach): Add process to inferior list.
* remote-sim.c (sim_create_inferior): Add process to inferior list.
(gdbsim_close): Remove it.
* target.c (generic_mourn_inferior): If inferior_ptid is not
null_ptid, remove the corresponding inferior from inferior list.
* win32-nat.c (do_initial_win32_stuff): Add process to inferior list.
(win32_detach): Remove it.
* linux-nat.c (linux_child_follow_fork): Delete and add inferiors
to inferior list accordingly.
* fork-child.c (fork_inferior): Add process to inferior list.
* corelow.c (CORELOW_PID): Define.
(core_close): Remove core from inferior list.
(core_open): Add it.
2008-09-22 15:16:51 +00:00
Ulrich Weigand
ffe5a37e17
* auxv.c (default_auxv_parse): Use gdbarch_ptr_bit (target_gdbarch)
...
instead of builtin_type_void_data_ptr.
* target.c (default_region_ok_for_hw_watchpoint): Likewise.
2008-09-11 14:29:21 +00:00
Ulrich Weigand
0b1553bcdd
* gdbarch.sh (gdbarch_dump): Use core_addr_to_string_nz
...
instead of paddr_nz.
* gdbarch.c: Regenerate.
* target.c (target_xfer_partial, debug_print_register): Use
core_addr_to_string_nz instead of paddr_nz.
2008-09-05 12:57:16 +00:00
Ulrich Weigand
b52323fa6f
* target.c (update_current_target): Do not inherit to_open
...
or to_close.
(pop_target): Call target_close on target_stack instead
of current_target.
(pop_all_targets_above): Likewise.
2008-09-05 11:50:57 +00:00
Ulrich Weigand
714835d5a6
* breakpoint.h (struct bp_location): Change type of section
...
member to "struct obj_section *".
* tracepoint.h (struct tracepoint): Likewise.
* symtab.h (struct general_symbol_info): Replace bfd_section
member with obj_section.
(struct symtab_and_line): Change type of section member to
"struct obj_section *".
(SYMBOL_BFD_SECTION): Remove macro, replace by ...
(SYMBOL_OBJ_SECTION): ... this.
* minsym.c (prim_record_minimal_symbol_and_info): Record symbol
section as obj_section instead of bfd_section.
* ada-lang.c (ada_decode_symbol): Use gsymbol->obj_section
directly instead of looking of obj_section from bfd_section.
* objfiles.h (find_pc_sect_section): Remove.
* objfiles.c (find_pc_sect_section): Remove.
(find_pc_section): Inline find_pc_sect_section code.
* symfile.h (find_pc_overlay): Return struct obj_section *.
(find_pc_mapped_section): Likewise.
(section_is_overlay, section_is_mapped): Change type of section
argument to struct obj_section *.
(pc_in_mapped_range, pc_in_unmapped_range): Likewise.
(overlay_mapped_address, overlay_unmapped_address): Likewise.
(symbol_overlayed_address): Likewise.
* symtab.h (symbol_overlayed_address): Likewise.
* symfile.c (overlay_is_mapped): Remove.
(section_is_mapped): Inline overlay_is_mapped code. Update.
(overlay_invalidate_all): Update.
(section_is_overlay): Change section argument to type
"struct obj_section *". Use bfd_ methods.
(pc_in_unmapped_range): Likewise. Handle relocated sections.
(pc_in_mapped_range): Likewise. Handle relocated sections.
(sections_overlap): Likewise.
(overlay_unmapped_address): Likewise.
(overlay_mapped_address): Likewise.
(symbol_overlayed_address): Likewise.
(find_pc_overlay): Return struct obj_section *.
(find_pc_mapped_section): Likewise.
(list_overlays_command): Update.
(map_overlay_command, unmap_overlay_command): Update.
(simple_overlay_update): Update.
* block.h (blockvector_for_pc_sect): Change section argument
to type "struct obj_section *".
(block_for_pc_sect): Likewise.
* block.c (blockvector_for_pc_sect): Change section argument
to type "struct obj_section *".
(block_for_pc_sect): Likewise.
* symtab.h (find_pc_sect_function, find_pc_sect_psymtab,
find_pc_sect_symtab, find_pc_sect_psymbol, find_pc_sect_line,
lookup_minimal_symbol_by_pc_section, find_function_start_pc): Likewise.
(matching_bfd_sections): Rename to ...
(matching_obj_sections): ... this. Update argument types.
* blockframe.c (find_pc_sect_function): Likewise.
* breakpoint.c (describe_other_breakpoints): Likewise.
(breakpoint_has_pc, check_duplicates_for): Likewise.
* minsyms.c (lookup_minimal_symbol_by_pc_section_1): Likewise.
(lookup_minimal_symbol_by_pc_section): Likewise.
* symtab.c (find_pc_sect_psymtab_closer): Likewise.
(find_pc_sect_psymtab, find_pc_sect_psymbol, find_pc_sect_symtab,
find_pc_sect_line, find_function_start_pc): Likewise.
(matching_bfd_sections): Rename to ...
(matching_obj_sections): ... this. Update argument types.
* blockframe.c (find_pc_partial_function): Update to section
type changes. No longer call find_pc_sect_section.
(cache_pc_function_section): Change to type "struct obj_section *".
* breakpoint.c (resolve_sal_pc): Update to section type changes.
* exec.c (xfer_memory): Likewise.
* findvar.c (read_var_value): Likewise.
* infcmd.c (jump_command): Likewise.
* linespec.c (minsym_found): Likewise.
* maint.c (maintenance_translate_address): Likewise.
* minsyms.c (lookup_minimal_symbol_by_pc_section_1): Likewise.
(lookup_solib_trampoline_symbol_by_pc): Likewise.
* parse.c (write_exp_msymbol): Likewise.
* printcmd.c (build_address_symbolic): Likewise.
(address_info, sym_info): Likewise.
* symmisc.c (dump_msymbols, print_symbol): Likewise.
* symtab.c (fixup_section): Likewise.
(fixup_symbol_section, fixup_psymbol_section): Likewise.
(find_pc_line, find_function_start_sal): Likewise.
* target.c (memory_xfer_partial): Likewise.
* hppa-hpux-tdep.c (hppa64_hpux_in_solib_call_trampoline): Likewise.
* spu-tdep.c (spu_overlay_update): Likewise.
2008-09-05 11:37:18 +00:00
Doug Evans
623d3eb139
* defs.h (plongest,pulongest): Renamed from paddr_u,paddr_d.
...
Change argument of pulongest from CORE_ADDR to ULONGEST.
All callers updated.
* utils.c (plongest): Renamed from paddr_d.
(pulongest): Renamed from paddr_u, change arg type to ULONGEST.
* remote-mips.c (send_srec): Use paddr_nz instead of paddr_u in
`CORE_ADDR addr' arg of error message.
2008-09-04 22:49:30 +00:00
Ulrich Weigand
1cf3db46a6
* gdbarch.sh (target_gdbarch): New global variable.
...
(deprecated_current_gdbarch_select_hack): Set it.
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.c (gdbarch_update_p): Use target_gdbarch instead
of current_gdbarch.
* target-descriptions.c (target_find_description): Likewise.
* arm-tdep.c (arm_update_current_architecture): Likewise.
(show_fp_model, arm_show_abi, arm_show_fallback_mode,
arm_show_force_mode): Likewise.
* mips-tdep.c (show_mask_address, show_mipsfpu_command,
show_mips_abi): Likewise.
* mep-tdep.c (me_module_register_set, current_me_module): Likewise.
* target.c (target_translate_tls_address): Use target_gdbarch
instead of current_gdbarch.
* remote.c (struct packet_reg): Likewise.
(get_remote_arch_state, packet_reg_from_regnum,
packet_reg_from_pnum, remote_check_symbols, remote_wait,
remote_address_masked, remote_insert_breakpoint,
remote_insert_hw_breakpoint, remote_read_description): Likewise.
* remote-m32r-sdi.c (m32r_resume, m32r_wait): Likewise.
* remote-mips.c (mips_open, mips_common_breakpoint): Likewise.
* cris-tdep.c (cris_can_use_hardware_watchpoint): Likewise.
* solib.c (solib_open, solib_map_sections, solib_read_symbols,
solib_add, info_sharedlibrary_command, solib_address,
solib_create_inferior_hook, in_solib_dynsym_resolve_code,
solib_global_lookup): Likewise.
* solib-frv.c (enable_break2, frv_relocate_main_executable): Likewise.
* solib-irix.c (irix_current_sos, irix_open_symbol_file_object):
Likewise.
* solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
* solib-svr4.c (exec_entry_point, enable_break, svr4_free_so,
set_solib_svr4_fetch_link_map_offsets, svr4_fetch_link_map_offsets):
Likewise.
* nto-tdep.c (nto_find_and_open_solib, nto_init_solib_absolute_prefix,
nto_truncate_ptr): Likewise.
* mips-linux-tdep.c (mips_linux_in_dynsym_stub): Likewise.
2008-08-26 17:21:29 +00:00
Ulrich Weigand
0ff587217a
* target.c (debug_print_register): Use regcache_raw_collect
...
instead of regcache_cooked_read. Only handle raw registers.
2008-08-26 12:42:00 +00:00
Vladimir Prus
9908b56683
Make sure target supports non-stop.
...
* infcmd.c (run_command_1, attach_command): If non-stop mode
is requested, verify the target supports it.
* linux-nat.c (linux_nat_supports_non_stop): New.
(linux_nat_add_target): Register the above.
* target.c (find_default_supports_non_stop)
(target_supports_non_stop): New.
(init_dummy_target): Register find_default_supports_non_stop.
* target.h (struct target_ops): New field to_supports_non_stop.
(target_supports_non_stop): New.
2008-08-19 13:22:14 +00:00
Vladimir Prus
c6ebd6cf99
* target.c (target_async_permitted, target_async_permitted_1)
...
(set_maintenance_target_async_permitted)
(show_maintenance_target_async_permitted): New.
(initialize_targets): Register 'set target-async'.
* target.h (target_async_permitted): Declare.
* linux-nat.c (linux_nat_async_enabled)
(linux_nat_async_permitted, set_maintenance_linux_async_permitted)
(show_maintenance_linux_async_permitted): Remove.
(sigchld_handler, linux_nat_is_async_p, linux_nat_can_async_p)
(get_pending_events, linux_nat_async): Use target_async_permitted.
(linux_nat_set_async_mode): Remove, moving the only used bits
into...
(linux_nat_setup_async): This.
(_initialize_linux_nat): Do not register 'maint set linux-async'.
Use linux_nat_setup_async.
* remote.c (remote_async_permitted, remote_async_permitted_set)
(set_maintenance_remote_async_permitted)
(show_maintenance_remote_async_permitted): Remove.
(remote_open_1, remote_terminal_inferior, remote_can_async_p)
(remote_is_async_p): Use target_async_permitted.
(_initialize_remote): Don't register 'main set remote-async'.
* mi/mi-cmds.c (mi_cmds): Register -list-target-features.
* mi/mi-cmds.h (mi_cmd_list_target_features): New.
* mi/mi-main.c (mi_cmd_list_target_features): New.
2008-08-19 13:05:02 +00:00
Vladimir Prus
073120b913
* target.c (maybe_kill_then_attach)
...
(maybe_kill_then_create_inferior): Remove.
(update_current_target): Do not default to_attach,
to_create_inferiour, to_is_async_p.
2008-08-19 12:49:19 +00:00
Pedro Alves
87ab71f0a0
* corelow.c (core_open): Assume there was no upper layer left
...
behind from a previous inferior.
* target.c (pop_all_targets): Rename to ...
(pop_all_targets_above): ... this. Add a target stratum
parameter. Use it instead of hardcoding the dummy_stratum.
(pop_all_targets): New, defer to pop_all_targets_above.
(target_preopen): Use pop_all_targets_above.
* target.h (pop_all_targets_above): Declare.
2008-08-18 23:12:40 +00:00
Pedro Alves
aa76d38d1d
* target.h (pop_all_targets): Declare.
...
* target.c (pop_all_targets): New.
* top.c (quit_target): Pop all targets instead of just closing the
current.
2008-08-16 22:12:18 +00:00
Ulrich Weigand
b9db4cedff
* target.c: Include "solib.h".
...
(target_pre_inferior): Call no_shared_libraries.
* infcmd.c (run_command_1): Do not call objfile_purge_solibs
or clear_solib.
(attach_command): Do not call clear_solib.
2008-08-09 12:15:10 +00:00
Pedro Alves
94cc34afe2
Non-stop inferior control.
...
* infrun.c (resume): In non-stop mode, always resume just one
thread.
(proceed): Don't call prepare_to_proceed in non-stop mode.
(fetch_inferior_event): In non-stop mode, switch context before
handling the event.
(error_is_running, ensure_not_running): New.
(handle_inferior_event): In non-stop mode: Mark only the event
thread as stopped. Require that the target module manages adding
threads to the thread list. Assert that there isn't a
deferred_step_ptid set. Don't switch to infwait_thread_hop_state.
(normal_stop): Only mark not-running if inferior hasn't exited.
In non-stop mode, only mark the event thread.
* thread.c:Include "cli/cli-decode.h".
(print_thread_info): Don't read from a running thread.
Output "(running)" if thread is running.
(switch_to_thread): Don't read stop_pc if thread is executing.
(do_restore_current_thread_cleanup): Don't write to a running
thread.
(thread_apply_all_command): Don't read from a running thread. In
non-stop mode, do a full context-switch instead of just switching
threads.
(thread_apply_command): In non-stop mode, do a full context-switch
instead of just switching threads.
(do_captured_thread_select): Likewise. Inform user if selected
thread is running.
(_initialize_thread): Mark "info threads" and "thread" and
async_ok.
* inf-loop.c (inferior_event_handler): In non-stop mode, don't
unregister the target from the event loop.
* infcmd.c (continue_command, step_1, jump_command)
(signal_command): Ensure the selected thread isn't running.
(interrupt_target_command): In non-stop mode, interrupt only the
selected thread.
* inferior.h (error_is_running, ensure_not_running): Declare.
* target.h (struct target_ops): Add ptid argument to the to_stop
member.
(target_stop): Add ptid_t argument.
* target.c (update_current_target): Add ptid argument to to_stop's
type.
(debug_to_stop): Add ptid_t argument.
(debug_to_rcmd): Set to_stop_ptid.
* remote.c (remote_stop): Add ptid_t argument.
(async_remote_interrupt): Add inferior_ptid to target_stop.
* inf-ptrace.c (inf_ptrace_stop): Add ptid argument.
* Makefile.in (thread.o): Depend on $(cli_decode_h).
2008-07-09 22:42:43 +00:00
Pedro Alves
8ea051c51f
Add "executing" property to threads.
...
* inferior.h (target_executing): Delete.
* gdbthread.h (struct thread_info): Add executing_ field.
(set_executing, is_executing): New.
* thread.c (main_thread_executing): New.
(init_thread_list): Clear it and also main_thread_running.
(is_running): Return false if target has no execution.
(any_running, is_executing, set_executing): New.
* top.c: Include "gdbthread.h".
(target_executing): Delete.
(execute_command): Replace target_executing check by any_running.
* event-top.c: Include "gdbthread.h".
(display_gdb_prompt, command_handler): Replace target_executing by
is_running.
* inf-loop.c: Include "gdbthread.h". Don't mark as not executing
here. Replace target_executing by is_running.
* infrun.c (handle_inferior_event): Mark all threads as
not-executing.
* linux-nat.c (linux_nat_resume): Don't mark thread as executing
here.
* stack.c (get_selected_block): Return null if inferior is
executing.
* target.c (target_resume): Mark resumed ptid as executing.
* breakpoint.c (until_break_command): Replace target_executing
check by is_executing.
* remote.c (remote_async_resume): Don't mark inferior as executing
here.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing
by any_running.
* mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute)
(mi_execute_async_cli_command): Replace target_executing by
is_running.
* frame.c (get_current_frame): Error out if the current thread is
executing.
(has_stack_frames): New.
(get_selected_frame, deprecated_safe_get_selected_frame): Check
has_stack_frames.
* Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on
$(gdbthread_h).
2008-07-09 22:16:15 +00:00
Pedro Alves
dc177b7a51
* config/i386/nm-cygwin.h (ATTACH_NO_WAIT): Delete.
...
* config/i386/nm-i386gnu.h (ATTACH_NO_WAIT): Delete.
* target.h (struct target_ops): Add to_attach_no_wait member.
(target_attach_no_wait): New.
* target.c (update_current_target): Inherit to_attach_no_wait.
* infcmd.c: Replace ATTACH_NO_WAIT compile time check by
target_attach_no_wait runtime check.
* gnu-nat.c (init_gnu_ops): Set to_attach_no_wait in gnu_ops.
* win32-nat.c (init_win32_ops): Set to_attach_no_wait in
win32_ops.
2008-07-03 17:38:08 +00:00
Daniel Jacobowitz
d5af19bafb
* Makefile.in (GNULIB_H): Use GNULIB_STDINT_H.
...
(gdb_stdint_h, gdb_stdint.h, stamp-int): Delete. Remove
all dependencies on $(gdb_stdint_h).
(distclean): Do not delete gdb_stdint.h.
* acinclude.m4: Do not use stdint.m4.
* configure.ac: Set GNULIB_STDINT_H. Remove tests for stdint.h,
uintptr_t, and gdb_stdint.h.
* defs.h: Include <stdint.h>.
* gdb_thread_db.h: Assume stdint.h is already included.
* breakpoint.c, findcmd.c, hppa-tdep.c, inf-ptrace.c, proc-service.c,
rs6000-nat.c, spu-linux-nat.c, target.c, win32-nat.c: Do not
include gdb_stdint.h.
* configure, config.in: Regenerate.
2008-06-26 15:51:28 +00:00
Vladimir Prus
d50867903f
* target.c (target_read_until_error): New.
...
* target.h (target_read_until_error): Declare.
* mi/mi-main.c (mi_cmd_data_read_memory): Use
target_read_until_error.
2008-06-26 15:10:48 +00:00
Vladimir Prus
e1ac332873
Implement *running.
...
* Makefile.in: Update dependencies.
* gdbthread.h (struct thread_info): New field
running_.
(set_running, is_running): New.
* thread.c (set_running, is_running): New.
* inferior.h (suppress_normal_stop_observer): Rename to...
(suppress_run_stop_observers): ..this.
* infcmd.c (suppress_normal_stop_observer): Rename to...
(suppress_run_stop_observers): ..this.
(finish_command_continuation, finish_command): Adjust.
* infcall.c (call_function_by_hand): Adjust.
* infrun.c (normal_stop): Call set_running.
* target.c (target_resume): New. Call set_running.
* target.h (target_resume): Convert from macro to
a function.
* mi/mi-interp.c (mi_on_resume): New.
(mi_interpreter_init): Register mi_on_resume.
2008-06-10 10:23:54 +00:00
Doug Evans
5e1471f57f
* error.c (parse_find_args): Fix capitalization in previous patch.
...
(find_command): Ditto.
* target.c (simple_search_memory): Ditto.
* gdbserver/server.c (handle_search_memory_1): Ditto.
(handle_search_memory): Ditto.
2008-05-09 17:37:36 +00:00
Doug Evans
08388c79d5
New "find" command.
...
* NEWS: Document find command and qSearch:memory packet.
* Makefile.in (SFILES): Add findcmd.c.
(COMMON_OBJS): Add findcmd.o.
(findcmd.o): New rule.
* findcmd.c: New file.
* target.h (target_ops): New member to_search_memory.
(simple_search_memory): Declare.
(target_search_memory): Declare.
* target.c (simple_search_memory): New fn.
(target_search_memory): New fn.
* remote.c (PACKET_qSearch_memory): New packet kind.
(remote_search_memory): New fn.
(init_remote_ops): Init to_search_memory.
(init_extended_remote_ops): Ditto.
(_initialize_remote): Add qSearch:memory packet config command.
* gdbserver/server.h (decode_search_memory_packet): Declare.
* gdbserver/remote-utils.c (decode_search_memory_packet): New fn.
* gdbserver/server.c (handle_search_memory_1): New fn.
(handle_search_memory): New fn.
(handle_query): Process qSearch:memory packets.
* doc/gdb.texinfo: Document "find" command, qSearch:memory packet.
* testsuite/gdb.base/find.exp: New file.
* testsuite/gdb.base/find.c: New file.
2008-05-09 17:02:03 +00:00
Andreas Schwab
5009afc5ba
* target.h (struct target_ops): Add
...
to_watchpoint_addr_within_range.
(target_watchpoint_addr_within_range): New function.
* target.c (update_current_target): Inherit
to_watchpoint_addr_within_range, defaulting to
default_watchpoint_addr_within_range.
(default_watchpoint_addr_within_range): New function.
(debug_to_watchpoint_addr_within_range): New function.
(setup_target_debug): Set to_watchpoint_addr_within_range.
* ppc-linux-nat.c (ppc_linux_watchpoint_addr_within_range):
New function.
(_initialize_ppc_linux_nat): Set to_watchpoint_addr_within_range.
* breakpoint.c (watchpoints_triggered): Use
target_watchpoint_addr_within_range.
* gdbint.texinfo (Algorithms): Describe
target_watchpoint_addr_within_range.
2008-05-02 11:07:25 +00:00
Vladimir Prus
74960c6002
* breakpoint.h (bp_location_p): New typedef.
...
Register a vector of bp_location_p.
* breakpoint.c (always_inserted_mode)
(show_always_inserted_mode): New.
(unlink_locations_from_global_list): Remove.
(update_global_location_list)
(update_global_location_list_nothrow): New.
(update_watchpoint): Don't free locations.
(should_insert_location): New.
(insert_bp_location): Use should_insert_location.
(insert_breakpoint_locations): Copied from
insert_breakpoints.
(insert_breakpoint): Use insert_breakpoint_locations.
(bpstat_stop_status): Call update_global_location_list
when disabling breakpoint.
(allocate_bp_location): Don't add to bp_location_chain.
(set_raw_breakpoint)
(create_longjmp_breakpoint, enable_longjmp_breakpoint)
(disable_longjmp_breakpoint, create_overlay_event_breakpoint)
(enable_overlay_breakpoints, disable_overlay_breakpoints)
(set_longjmp_resume_breakpoint)
(enable_watchpoints_after_interactive_call_stop)
(disable_watchpoints_before_interactive_call_start)
(create_internal_breakpoint)
(create_fork_vfork_event_catchpoint)
(create_exec_event_catchpoint, set_momentary_breakpoint)
(create_breakpoints, break_command_1, watch_command_1)
(create_exception_catchpoint)
(handle_gnu_v3_exceptions)
(disable_breakpoint, breakpoint_re_set_one)
(create_thread_event_breakpoint, create_solib_event_breakpoint)
(create_ada_exception_breakpoint): : Don't call check_duplicates.
Call update_global_location_list.
(delete_breakpoint): Don't remove locations and don't
try to reinsert them. Call update_global_location_list.
(update_breakpoint_locations): Likewise.
(restore_always_inserted_mode): New.
(update_breakpoints_after_exec): Temporary disable
always inserted mode.
* Makefile.in: Update dependencies.
* infrun.c (proceed): Remove breakpoints while stepping
over breakpoint.
(handle_inferior_event): Don't remove or insert
breakpoints.
* linux-fork.c (checkpoint_command): Remove breakpoints
before fork and insert after.
(linux_fork_context): Remove breakpoints before switch
and insert after.
* target.c (target_disconnect, target_detach): Remove
breakpoints from target.
2008-04-24 10:21:45 +00:00
Pedro Alves
5f667f2da0
* target.c (find_default_run_target): Allow a NULL `do_mesg'
...
parameter. If it is NULL, don't call error.
(find_default_can_async_p, find_default_is_async_p): Pass NULL as
`do_mesg' parameter to find_default_run_target. If no target was
found, return 0.
2008-03-28 16:37:08 +00:00
Pedro Alves
b84876c212
gdb/
...
* target.h (struct target_ops): Delete to_async_mask_value and add
to_async_mask.
(target_is_async_p, target_async): Formatting.
(target_async_mask_value): Delete.
(target_async_mask): Delete function declaration, and add new
target macro with the same name.
* target.c (update_current_target): Replace to_async_mask_value by
to_async_mask. Default to_async_mask to return_one.
(target_async_mask): Delete.
(find_default_can_async_p, find_default_is_async_p): New.
(init_dummy_target): register find_default_can_async_p and
find_default_is_async_p on the dummy target.
* linux-nat.c: Include inf-loop.h, event-loop.h and event-top.h.
(debug_linux_nat_async): New global.
(show_debug_linux_nat_async): New function.
(linux_nat_async_enabled, linux_nat_async_mask_value)
(linux_nat_event_pipe, linux_nat_num_queued_events)
(linux_nat_async_events_enabled): New globals.
(struct waitpid_result): New struct.
(waitpid_queue): New global.
(queued_waitpid, push_waitpid, drain_queued_events): New.
(my_waitpid): Call queued_waitpid.
(linux_child_follow_fork): Disable async events during the call.
(blocked_mask): Delete.
(sync_sigchld_action, async_sigchld_action): New globals.
(lin_lwp_attach_lwp): In sync mode, don't reblock SIGCHLD. In
async mode, block events during the call.
(linux_nat_create_inferior): New.
(linux_nat_attach): In sync mode, restore the mask states. In
async mode, wake the event loop immediatelly.
(detach_callback): Drain all queued events of the lwp we're
detaching from.
(linux_nat_detach): Block async mode, and drain events of the main
process.
(linux_nat_resume): If in async mode, mask async events during the
call. If short circuiting, force event loop to wake up. If
resuming, set target_executing, and register target events in the
event loop.
(pipe_to_local_event_queue, local_event_queue_to_pipe): New.
(linux_nat_wait): In async mode, block events during the call.
Only enable/disable passing SIGINT to the inferior in sync mode.
Get events from local waitpid queue. If no interesting events was
found, return to events loop. Reregister target events in the
event loop on exit. In sync mode, no need to reblock SIGCHLD.
(linux_nat_kill): Disable events on entry.
(linux_nat_mourn_inferior): In sync mode, don't restore the masks
here. Detach async mode from the event loop if there are no more
forks available, otherwise leave it on.
(sigchld_handler): Assure this is called only in sync mode.
(linux_async_permitted, linux_async_permitted_1): New globals.
(set_maintenance_linux_async_permitted)
(show_maintenance_linux_async_permitted): New functions.
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_async_mask): New.
(linux_nat_event_pipe_pop, linux_nat_event_pipe_push): New.
(get_pending_events, async_sigchld_handler): New.
(linux_nat_async_events): New.
(async_terminal_is_ours): New global.
(linux_nat_terminal_inferior, linux_nat_terminal_ours): New.
(async_client_callback, async_client_context): New.
(linux_nat_async_file_handler, linux_nat_async)
(linux_nat_disable_async, linux_nat_enable_async): New.
(linux_nat_add_target): Register linux_nat_create_inferior,
linux_nat_can_async_p, linux_nat_is_async_p, linux_nat_async,
linux_nat_async_mask, linux_nat_terminal_inferior and
linux_nat_terminal_ours.
(_initialize_linux_nat): Remove local action variable, and update
code that used it to use sync_sigchld_action. Add new
"lin-lwp-async" debug set/show command. Put the "lin-lwp" debug
set/show command in the maintenance class. Add new "linux-async"
maintenance set/show command. Block SIGCHLD by default. Setup
async_sichld_action, and sync_sigchld_action. Install the default
async mode.
(lin_thread_get_thread_signals): Use a local sigset_t for blocking
the cancel signals.
* linux-thread-db.c (re_check_for_thread_db): New.
(clear_lwpid_callback): Handle TARGET_WAITKIND_IGNORE.
(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
(thread_db_async_mask): New.
(init_thread_db_ops): Register thread_db_can_async_p,
thread_db_is_async_p, thread_db_async and thread_db_async_mask.
* remote.c (remote_async_mask_value): New.
(remote_return_zero): New.
(init_remote_ops): Register remote_return_zero as callbacks of
to_can_async_p and to_is_async_p.
(remote_can_async_p, remote_is_async_p, remote_async): Update to
use remote_async_mask_value.
(remote_async_mask): New.
(init_remote_async_ops): Remove to_async_mask_value setting and
register remote_async_mask as to_async_mask callback in
remote_async_ops.
* Makefile.in (linux-nat.o): Update.
gdb/doc/
* gdb.texinfo (Debugging Output): Document
"set/show debug lin-lwp-async".
(Maintenance Commands): Document "maint set/show linux-async".
2008-03-21 17:09:35 +00:00
Vladimir Prus
6cf327044d
Remove ignoring leading exec events code.
...
* fork-child.c (startup_inferior): Do not set
inferior_ignoring_leading_exec_events.
* inf-child.c (inf_child_reported_exec_events_per_exec_call): Remove.
(inf_child_target): Do not set to_reported_exec_events_per_exec_call.
* infrun.c (inferior_ignoring_leading_exec_events): Remove.
(handle_inferior_event): Remove code for ignoring leading exec
events.
* target.c (update_current_target): Do not inherit, or default,
to_reported_exec_events_per_exec_call.
(debug_to_reported_exec_events_per_exec_call): Remove.
(setup_target_debug): Do not set to_reported_exec_events_per_exec_call.
* target.h (target_reported_exec_events_per_exec_call): Remove.
(struct target): Remove the to_reported_exec_events_per_exec_call
field.
2008-03-15 14:55:21 +00:00
Daniel Jacobowitz
8defab1af7
* breakpoint.h (breakpoint_restore_shadows): New
...
declaration.
* breakpoint.c (breakpoint_restore_shadows): New.
(read_memory_nobpt): Delete.
* gdbcore.h (read_memory_nobpt): Delete declaration.
* target.c (memory_xfer_partial): Call
breakpoint_restore_shadows.
(restore_show_memory_breakpoints)
(make_show_memory_beakpoints_cleanup): New.
(show_memory_breakpoints): New.
* target.h (make_show_memory_beakpoints_cleanup): Declare.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint):
Make sure we see memory breakpoints when checking if
breakpoint is still there.
* alpha-tdep.c, alphanbsd-tdep.c, frame.c, frv-tdep.c,
hppa-linux-tdep.c, hppa-tdep.c, i386-linux-nat.c, i386-tdep.c,
m68klinux-tdep.c, mips-tdep.c, mn10300-tdep.c, s390-tdep.c,
sparc-tdep.c: Use target_read_memory instead of read_memory_nobpt.
2008-03-13 12:22:14 +00:00
Daniel Jacobowitz
8edfe26932
* infcmd.c (kill_if_already_running): Make static. Use
...
target_require_runnable.
* target.c (target_require_runnable): New.
* target.h (target_require_runnable): Declare.
* gdb.texinfo (Starting): Mention always-running targets.
(Target Commands): Add an anchor for load.
(Connecting): Explain continue instead of run.
2008-02-28 16:26:18 +00:00
Michael Snyder
244e85c8df
2008-01-24 Michael Snyder <msnyder@specifix.com>
...
* procfs.c (procfs_xfer_partial): Comment, cut/paste error.
* win32-nat.c (win32_xfer_partial): Ditto.
* target.c (default_xfer_partial): Minor whitespace adjustment.
2008-01-25 00:09:50 +00:00
Doug Evans
72f5cf0e51
* defs.h (struct continuation_arg): Fix typo in comment.
...
* target.c (target_translate_tls_address): Fix comment spelling error.
2008-01-11 00:12:43 +00:00
Daniel Jacobowitz
9b254dd1ce
Updated copyright notices for most files.
2008-01-01 22:53:26 +00:00
Jim Blandy
dfdfb3ca98
Remove unused support for target-based exception catching.
...
* target.h (struct target_ops): Delete
to_enable_exception_callback and to_get_current_exception_event
members.
(target_enable_exception_callback)
(target_get_current_exception_event): Delete macros.
* target.c (update_current_target): Remove code to inherit and
default those members.
(debug_to_enable_exception_callback)
(debug_to_get_current_exception_event): Delete functions.
(setup_target_debug): Don't install those methods.
* inf-child.c (inf_child_enable_exception_callback)
(inf_child_get_current_exception_event): Delete dummy functions.
(inf_child_target): Don't install them in the target vector.
* breakpoint.h (enum bptype): Delete bp_catch_catch,
bp_catch_throw.
* breakpoint.c (cover_target_enable_exception_callback)
(ep_is_exception_catchpoint, create_exception_catchpoint): Delete
functions.
(insert_bp_location, update_breakpoints_after_exec)
(remove_breakpoint, ep_is_catchpoint, print_it_typical)
(bpstat_stop_status, bpstat_what)
(bpstat_get_triggered_catchpoints, print_one_breakpoint_location)
(user_settable_breakpoint, allocate_bp_location)
(disable_watchpoints_before_interactive_call_start)
(enable_watchpoints_after_interactive_call_stop, mention)
(delete_breakpoint, breakpoint_re_set_one, disable_command)
(enable_command): Remove exception catchpoint cases.
(catch_exception_command_1): Don't try target-based exception
handling.
* stack.c (catch_info): Call print_frame_label_vars
unconditionally.
2007-12-13 02:00:09 +00:00
Maciej W. Rozycki
49d03eab05
* target.c (update_current_target): Inherit to_log_command.
...
* target.h (struct target_ops). Add to_log_command.
(target_log_command): New macro.
* top.c (execute_command): Call target_log_command() rather than
serial_log_command().
* monitor.c (init_base_monitor_ops): Initialize to_log_command.
* remote-m32r-sdi.c (init_m32r_ops): Likewise.
* remote-mips.c (_initialize_remote_mips): Likewise.
* remote.c (init_remote_ops): Likewise.
2007-12-07 15:02:12 +00:00
Ulrich Weigand
f8d2990873
2007-10-22 Markus Deuling <deuling@de.ibm.com>
...
* target.c (debug_print_register): Use get_regcache_arch to get at the
current architecture by regcache.
2007-10-22 14:03:37 +00:00
Daniel Jacobowitz
b4b61fdbdf
* target.c (update_current_target): Call setup_target_debug.
...
(push_target): Do not call it here.
2007-10-10 13:28:43 +00:00
Joel Brobecker
a9762ec78a
Switch the license of all .c files to GPLv3.
...
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
2007-08-23 18:08:50 +00:00
Michael Snyder
6217bf3e40
2007-08-08 Michael Snyder <msnyder@access-company.com>
...
* target.c (target_read_string): Guard against null.
2007-08-08 22:02:43 +00:00
Ulrich Weigand
98646950ba
* target.c (memory_xfer_partial): Accesses to unmapped overlay
...
sections should always go to the executable file.
2007-07-24 12:49:24 +00:00
Daniel Jacobowitz
5ad3a4ca20
PR symtab/2161
...
* target.c (memory_xfer_partial): Do not continue past targets with
all memory.
2007-07-01 22:35:55 +00:00
Ulrich Weigand
c9f4d5725d
2007-06-09 Markus Deuling <deuling@de.ibm.com>
...
* gdbarch.sh (REGISTER_NAME): Replace by gdbarch_register_name.
* tracepoint.c (scope_info): Likewise.
* target.c (debug_print_register): Likewise.
* stack.c (frame_info): Likewise.
* sh-tdep.c (sh_register_reggroup_p): Likewise.
* sh64-tdep.c (sh64_do_fp_register, sh64_do_register)
(sh64_media_print_registers_info)
(sh64_compact_print_registers_info): Likewise.
* rs6000-tdep.c (rs6000_register_reggroup_p): Likewise.
* remote-sim.c (gdbsim_fetch_register): Likewise.
* remote.c (packet_reg): Likewise (comment).
* reggroups.c (default_register_reggroup_p): Likewise.
* regcache.c (regcache_dump): Likewise.
* printcmd.c (address_info): Likewise.
* ppc-linux-nat.c (fetch_register, store_register): Likewise.
* mt-dep.c (mt_registers_info): Likewise.
* mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Likewise (comment).
* mips-tdep.c (mips_register_reggroup_p, mips_read_fp_register_single)
(mips_read_fp_register_double, mips_print_fp_register)
(mips_print_register, print_gp_register_row, mips_print_registers_info)
(mips_register_sim_regno): Likewise.
* m68klinux-nat.c (regmap, fetch_register, store_register): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_register)
(inf_ptrace_store_register): Likewise.
* infcmd.c (default_print_registers_info): Likewise.
* ia64-linux-nat.c (ia64_linux_fetch_register)
(ia64_linux_store_register): Likewise.
* i386-linux-nat.c (fetch_register, store_register): Likewise.
* i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Likewise.
* hppa-linux-nat.c (fetch_register, store_register): Likewise.
* hppa-hpux-nat.c (hppa_hpux_fetch_register)
(hppa_hpux_store_register): Likewise.
* findvar.c (locate_var_value): Likewise.
* dwarf2loc.c (locexpr_describe_location): Likewise.
* dwarf2-frame.c (execute_cfa_program): Likewise.
* arm-tdep.c (arm_push_dummy_call): Likewise.
* arch-utils.c (legacy_register_sim_regno): Likewise.
* alpha-tdep.c (alpha_register_reggroup_p): Likewise.
* alpha-nat.c (fetch_osf_core_registers): Likewise.
* mi/mi-main.c (mi_cmd_data_list_register_names)
(mi_cmd_data_list_changed_registers, mi_cmd_data_list_register_values)
(mi_cmd_data_write_register_values): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.
2007-06-09 13:42:16 +00:00
Ulrich Weigand
f57d151a99
2007-05-31 Markus Deuling <deuling@de.ibm.com>
...
* gdbarch.sh (NUM_REGS): Replace by gdbarch_num_regs.
* i386-tdep.c (i386_dbx_reg_to_regnum)
(i386_svr4_reg_to_regnum): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_registers)
(inf_ptrace_store_registers): Likewise.
* corelow.c (get_core_registers): Likewise.
* i386-linux-nat.c (supply_gregset, fill_gregset)
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers): Likewise.
* remote.c (init_remote_state,packet_reg_from_regnum)
(packet_reg_from_pnum,process_g_packet,remote_fetch_registers)
(remote_prepare_to_store,store_registers_using_G)
(remote_store_registers,remote_arch_state): Likewise.
* tracepoint.c (encode_actions): Likewise.
* mi/mi-main.c (mi_cmd_data_list_register_names)
(mi_cmd_data_list_changed_registers,mi_cmd_data_list_register_values)
(mi_cmd_data_write_register_values): Likewise.
* tui/tui-regs.c (tui_show_register_group)
(tui_show_register_group): Likewise.
* xtensa-tdep.h (FP_ALIAS): Likewise.
* xtensa-tdep.c (xtensa_register_name,xtensa_register_type)
(xtensa_reg_to_regnum,xtensa_pseudo_register_read)
(xtensa_pseudo_register_write,xtensa_register_reggroup_p): Likewise.
* win32-nat.c (do_win32_fetch_inferior_registers)
(do_win32_store_inferior_registers,fetch_elf_core_registers
* user-regs.h: Likewise (comment).
* user-regs.c (user_reg, user_reg_map_name_to_regnum): Likewise.
* trad-frame.c (trad_frame_alloc_saved_regs): Likewise.
* target-descriptions.h: Likewise (comment).
* target-descriptions.c (tdesc_use_registers): Likewise (comment).
* target.c (debug_print_register): Likewise.
* stack.c (frame_info): Likewise.
* stabsread.c (define_symbol): Likewise.
* sh64-tdep.c (sh64_do_pseudo_register,sh64_print_register)
(sh64_media_print_registers_info)
(sh64_compact_print_registers_info): Likewise.
* rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
* rs6000-nat.c (fetch_register,store_register): Likewise.
* remote-sim.c (one2one_register_sim_regno,gdbsim_fetch_register)
(gdbsim_fetch_register,gdbsim_store_register): Likewise.
* remote-mips.c (mips_fetch_registers,mips_store_registers): Likewise.
* remote-m32r-sdi.c (m32r_fetch_registers)
(m32r_store_registers): Likewise.
* reggroups.c (default_register_reggroup_p): Likewise.
* regcache.c (init_regcache_descr,register_size,regcache,regcache_save)
(regcache_restore,regcache_dump): Likewise.
* monitor.c (monitor_fetch_registers,monitor_store_registers): Likewise.
* mips-tdep.c (mips_xfer_register,mips_register_name)
(mips_register_reggroup_p,mips_pseudo_register_read)
(mips_pseudo_register_write,mips_convert_register_p,mips_register_type)
(mips_unwind_pc,mips_unwind_sp,mips_unwind_dummy_id,set_reg_offset)
(mips16_scan_prologue,mips_insn16_frame_cache,reset_saved_regs)
(mips32_scan_prologue,mips_insn32_frame_cache,read_next_frame_reg)
(mips_n32n64_return_value,mips_o32_return_value,mips_o64_return_value)
(print_gp_register_row,mips_print_registers_info)
(mips_stab_reg_to_regnum,mips_dwarf_dwarf2_ecoff_reg_to_regnum)
(mips_register_sim_regno): Likewise.
* mips-linux-tdep.c (mips_linux_o32_sigframe_init)
(mips_linux_n32n64_sigframe_init): Likewise.
* mips-linux-nat.c (mips_linux_register_addr)
(mips64_linux_register_addr): Likewise.
* findvar.c (value_of_register): Likewise.
* infcmd.c (default_print_registers_info,registers_info)
(print_vector_info,print_float_info): Likewise.
* mips64obsd-tdep.c (mips64obsd_sigframe_init): Likewise.
* inf-child.c (inf_child_fetch_inferior_registers): Likewise.
* m68k-tdep.c (m68k_dwarf_reg_to_regnum): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache(: Likewise.
* m32r-tdep.c (m32r_frame_unwind_cache): Likewise.
* ia64-linux-nat.c (ia64_register_addr,ia64_cannot_fetch_register)
(ia64_cannot_store_register,ia64_linux_fetch_registers)
(ia64_linux_store_registers): Likewise.
* hpux-thread.c (hpux_thread_fetch_registers)
(hpux_thread_store_registers): Likewise.
* h8300-tdep.c (E_PSEUDO_CCR_REGNUM,E_PSEUDO_EXR_REGNUM)
(h8300_init_frame_cache,h8300_frame_cache,h8300_frame_prev_register)
(h8300_register_type): Likewise.
* dwarf2-frame.c (dwarf2_frame_cache)
(dwarf2_frame_state_alloc_regs): Likewise.
* cris-tdep.c (cris_register_size,cris_cannot_fetch_register)
(cris_cannot_store_register,crisv32_cannot_fetch_register)
(crisv32_cannot_store_register,cris_register_name): Likewise.
* avr-tdep.c (avr_frame_unwind_cache): Likewise.
* arch-utils.c (legacy_register_sim_regno)
(legacy_virtual_frame_pointer): Likewise.
* arm-tdep.c (arm_make_prologue_cache,arm_register_sim_regno):Likewise.
* arm-tdep.h: Likewise (comment).
* frv-tdep.c (frv_register_sim_regno): Likewise.
* m68klinux-nat.c (old_fetch_inferior_registers)
(old_store_inferior_registers): Likewise.
* m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
* irix5-nat.c (fetch_core_registers): Likewise.
* hppa-tdep.c (hppa_frame_cache): Likewise.
* hppa-linux-nat.c (hppa_linux_register_addr)
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Likewise.
* hppa-hpux-nat.c (hppa_hpux_fetch_inferior_registers)
(hppa_hpux_store_inferior_registers): Likewise.
* amd64-nat.c (amd64_native_gregset_reg_offset)
(amd64_supply_native_gregset,amd64_collect_native_gregset): Likewise.
* dbug-rom.c (dbug_regname): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache)
(HARD_PAGE_REGNUM (comment)): Likewise.
* gdbarch.sh (NUM_PSEUDO_REGS): Replace by gdbarch_num_pseudo_regs.
* i386-tdep.c (i386_dbx_reg_to_regnum)
(i386_svr4_reg_to_regnum): Likewise.
* mi/mi-main.c (mi_cmd_data_list_register_names)
(mi_cmd_data_list_changed_registers,mi_cmd_data_list_register_values)
(mi_cmd_data_write_register_values): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.
* tui/tui-regs.c (tui_show_register_group): Likewise.
* xtensa-tdep.h (FP_ALIAS): Likewise.
* user-regs.h: Likewise (comment).
* user-regs.c (user_reg, user_reg_map_name_to_regnum): Likewise.
* trad-frame.c (trad_frame_alloc_saved_regs): Likewise.
* target-descriptions.h: Likewise (comment).
* target.c (debug_print_register): Likewise.
* stack.c (frame_info): Likewise.
* stabsread.c (define_symbol): Likewise.
* sh64-tdep.c (sh64_print_register,sh64_media_print_registers_info)
(sh64_compact_print_registers_info): Likewise.
* rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
* regcache.c (init_regcache_descr,register_size,regcache,regcache_save
(regcache_restore,regcache_dump): Likewise.
* mips-tdep.c (print_gp_register_row,mips_print_registers_info)
(mips_dwarf_dwarf2_ecoff_reg_to_regnum)
(mips_stab_reg_to_regnum): Likewise.
* findvar.c (value_of_register): Likewise.
* infcmd.c (default_print_registers_info,registers_info)
(print_vector_info,print_float_info): Likewise.
* m68k-tdep.c (m68k_dwarf_reg_to_regnum): Likewise.
* h8300-tdep.c (h8300_register_type): Likewise.
* dwarf2-frame.c (dwarf2_frame_cache): Likewise.
* frame.h (SIZEOF_FRAME_SAVED_REGS): Likewise.
* xtensa-tdep.c (xtensa_register_type,xtensa_reg_to_regnum)
(xtensa_pseudo_register_read,xtensa_pseudo_register_write): Likewise.
* parse.c: Remove comment.
* gdbarch.c, gdbarch.h: Regenerate
2007-05-31 17:32:22 +00:00
Ulrich Weigand
316f20603a
* target.h (struct target_ops): Add REGCACHE parameter to
...
to_prepare_to_store.
(target_prepare_to_store): Likewise.
* target.c (debug_to_prepare_to_store): Add REGCACHE parameter.
(update_current_target): Adapt prepare_to_store de_fault rule.
* regcache.c (regcache_raw_write): Pass regcache to
target_prepare_to_store.
* inftarg.c (child_prepare_to_store): Add REGCACHE parameter.
Do not call CHILD_PREPARE_TO_STORE.
* gnu-nat.c (gnu_prepare_to_store): Likewise.
* procfs.c (procfs_prepare_to_store): Likewise.
* inf-child.c (inf_child_prepare_to_store): Add REGCACHE parameter.
* go32-nat.c (go32_prepare_to_store): Likewise.
* monitor.c (monitor_prepare_to_store): Likewise.
* nto-procfs.c (procfs_prepare_to_store): Likewise.
* remote-m32r-sdi.c (m32r_prepare_to_store): Likewise.
* remote-mips.c (mips_prepare_to_store): Likewise.
* remote-sim.c (gdbsim_prepare_to_store): Likewise.
* win32-nat.c (win32_prepare_to_store): Likewise.
* remote.c (remote_prepare_to_store): Add REGCACHE parameter.
Use it instead of current_regcache.
* hpux-thread.c (hpux_thread_prepare_to_store): Add REGCACHE
parameter. Pass it on to next target.
* sol-thread.c (sol_thread_prepare_to_store): Likewise.
2007-05-06 18:55:41 +00:00
Ulrich Weigand
56be38147c
* target.h (struct regcache): Add forward declaration.
...
(struct target_ops): Add REGCACHE parameter to to_fetch_registers
and to_store_registers target operations.
(target_fetch_registers, target_store_registers): Update.
* regcache.c (regcache_raw_read): Replace register_cached by
regcache_valid_p. Pass regcache to target_fetch_registers.
(regcache_raw_write): Pass regcache to target_store_registers.
* arm-linux-nat.c (store_fpregister, store_fpregs, store_register,
store_regs, store_wmmx_regs): Replace register_cached by
regcache_valid_p.
* bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd): Pass current_regcache
to target_fetch_registers calls.
* corelow.c (core_open): Likewise.
* linux-nat.c (linux_nat_corefile_thread_callback): Likewise.
* proc-service.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs,
ps_lsetfpregs): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs, ps_lgetfpregs,
ps_lsetfpregs): Likewise.
* win32-nat.c (win32_resume): Likewise.
* ia64-tdep.c (ia64_store_return_value): Pass current_regcache
to target_store_registers call.
* rs6000-tdep.c (rs6000_push_dummy_call): Likewise.
* inferior.h (store_inferior_registers): Update prototype.
(fetch_inferior_registers): Likewise.
* gnu-nat.c (gnu_store_registers, gnu_fetch_registers): Likewise.
* mips-linux-nat.c (super_fetch_registers, super_store_registers):
Update function pointer signatures.
* aix-thread.c (aix_thread_fetch_registers): Add REGCACHE parameter,
use it instead of current_regcache, update calls.
(aix_thread_store_registers): Likewise.
* alphabsd-nat.c (alphabsd_fetch_inferior_registers): Likewise.
(alphabsd_store_inferior_registers): Likewise.
* amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Likewise.
(amd64bsd_store_inferior_registers): Likewise.
* amd64-linux-nat.c (amd64_linux_fetch_inferior_registers): Likewise.
(amd64_linux_store_inferior_registers): Likewise.
* arm-linux-nat.c (fetch_fpregister, fetch_fpregs, store_fpregister,
store_fpregs, fetch_register, fetch_regs, store_register, store_regs,
fetch_wmmx_regs, store_wmmx_regs): Likewise.
(arm_linux_fetch_inferior_registers): Likewise.
(arm_linux_store_inferior_registers): Likewise.
* armnbsd-nat.c (fetch_register, fetch_regs, fetch_fp_register,
fetch_fp_regs, armnbsd_fetch_registers): Likewise.
(store_register, store_regs, store_fp_register, store_fp_regs,
armnbsd_store_registers): Likewise.
* bsd-kvm.c (bsd_kvm_fetch_pcb, bsd_kvm_fetch_registers): Likewise.
* bsd-uthread.c (bsd_uthread_fetch_registers): Likewise.
(bsd_uthread_store_registers): Likewise.
* corelow.c (get_core_registers): Likewise.
* go32-nat.c (fetch_register, go32_fetch_registers, store_register,
go32_store_registers): Likewise.
* hppabsd-nat.c (hppabsd_fetch_registers): Likewise.
(hppabsd_store_registers): Likewise.
* hppa-hpux-nat.c (hppa_hpux_fetch_register): Likewise.
(hppa_hpux_fetch_inferior_registers): Likewise.
(hppa_hpux_store_register): Likewise.
(hppa_hpux_store_inferior_registers): Likewise.
* hppa-linux-nat.c (fetch_register, store_register): Likewise.
(hppa_linux_fetch_inferior_registers): Likewise.
(hppa_linux_store_inferior_registers): Likewise.
* hpux-thread.c (hpux_thread_fetch_registers): Likewise.
(hpux_thread_store_registers): Likewise.
* i386bsd-nat.c (i386bsd_fetch_inferior_registers): Likewise.
(i386bsd_store_inferior_registers): Likewise.
* i386gnu-nat.c (fetch_fpregs, gnu_fetch_registers, store_fpregs,
gnu_store_registers): Likewise.
* i386-linux-nat.c (fetch_register, store_register, fetch_regs,
store_regs, fetch_fpregs, store_fpregs, fetch_fpxregs, store_fpxregs):
Likewise.
(i386_linux_fetch_inferior_registers): Likewise.
(i386_linux_store_inferior_registers): Likewise.
* ia64-linux-nat.c (ia64_linux_fetch_register): Likewise.
(ia64_linux_fetch_registers): Likewise.
(ia64_linux_store_register): Likewise.
(ia64_linux_store_registers): Likewise.
* inf-child.c (inf_child_fetch_inferior_registers): Likewise.
(inf_child_store_inferior_registers): Likewise.
* inf-ptrace.c (inf_ptrace_fetch_register): Likewise.
(inf_ptrace_fetch_registers): Likewise.
(inf_ptrace_store_register): Likewise.
(inf_ptrace_store_registers): Likewise.
* infptrace.c (fetch_register, store_register): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* m32r-linux-nat.c (fetch_regs, store_regs): Likewise.
(m32r_linux_fetch_inferior_registers): Likewise.
(m32r_linux_store_inferior_registers): Likewise.
* m68kbsd-nat.c (m68kbsd_fetch_inferior_registers): Likewise.
(m68kbsd_store_inferior_registers): Likewise.
* m68klinux-nat.c (fetch_register, old_fetch_inferior_registers,
store_register, old_store_inferior_registers, fetch_regs, store_regs,
fetch_fpregs, store_fpregs): Likewise.
(m68k_linux_fetch_inferior_registers): Likewise.
(m68k_linux_store_inferior_registers): Likewise.
* m88kbsd-nat.c (m88kbsd_fetch_inferior_registers): Likewise.
(m88kbsd_store_inferior_registers): Likewise.
* mips64obsd-nat.c (mips64obsd_fetch_inferior_registers): Likewise.
(mips64obsd_store_inferior_registers): Likewise.
* mips-linux-nat.c (mips64_linux_regsets_fetch_registers): Likewise.
(mips64_linux_regsets_store_registers): Likewise.
(mips64_linux_fetch_registers): Likewise.
(mips64_linux_store_registers): Likewise.
* mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers): Likewise.
(mipsnbsd_store_inferior_registers): Likewise.
* monitor.c (monitor_fetch_register, monitor_store_register): Likewise.
(monitor_fetch_registers, monitor_store_registers): Likewise.
* nto-procfs.c (procfs_fetch_registers): Likewise.
(procfs_store_registers): Likewise.
* ppc-linux-nat.c (fetch_altivec_register, fetch_spe_register,
fetch_register, supply_vrregset, fetch_altivec_registers,
fetch_ppc_registers, ppc_linux_fetch_inferior_registers): Likewise.
(store_altivec_register, store_spe_register, store_register,
fill_vrregset, store_altivec_registers, store_ppc_registers,
ppc_linux_store_inferior_registers): Likewise.
* ppcnbsd-nat.c (ppcnbsd_fetch_inferior_registers): Likewise.
(ppcnbsd_store_inferior_registers): Likewise.
* ppcobsd-nat.c (ppcobsd_fetch_registers): Likewise.
(ppcobsd_store_registers): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
* remote.c (fetch_register_using_p, process_g_packet,
fetch_registers_using_g, remote_fetch_registers): Likewise.
(store_register_using_P, store_registers_using_G,
remote_store_registers): Likewise.
* remote-m32r-sdi.c (m32r_fetch_registers, m32r_fetch_register,
m32r_store_register, m32r_store_register): Likewise.
* remote-mips.c (mips_fetch_registers, mips_store_registers): Likewise.
* remote-sim.c (gdbsim_fetch_register): Likewise.
(gdbsim_store_register): Likewise.
* rs6000-nat.c (fetch_register, store_register): Likewise.
(rs6000_fetch_inferior_registers): Likewise.
(rs6000_store_inferior_registers): Likewise.
* s390-nat.c (fetch_regs, store_regs): Likewise.
(fetch_fpregs, store_fpregs): Likewise.
(s390_linux_fetch_inferior_registers): Likewise.
(s390_linux_store_inferior_registers): Likewise.
* shnbsd-nat.c (shnbsd_fetch_inferior_registers): Likewise.
(shnbsd_store_inferior_registers): Likewise.
* sol-thread.c (sol_thread_fetch_registers): Likewise.
(sol_thread_store_registers): Likewise.
* sparc-nat.c (fetch_inferior_registers): Likewise.
(store_inferior_registers): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
(spu_store_inferior_registers): Likewise.
* target.c (debug_print_register): Likewise.
(debug_to_fetch_registers, debug_to_store_registers): Likewise.
* vaxbsd-nat.c (vaxbsd_fetch_inferior_registers): Likewise.
(vaxbsd_store_inferior_registers): Likewise.
* win32-nat.c (do_win32_fetch_inferior_registers): Likewise.
(win32_fetch_inferior_registers): Likewise.
(win32_store_inferior_registers): Likewise.
2007-05-06 14:34:38 +00:00
Ulrich Weigand
81c4a259cd
* regcache.c (deprecated_read_register_gen): Remove, inline ...
...
(read_register): ... here.
(deprecated_write_register_gen): Remove, inline ...
(write_register): ... here.
* regcache.h (deprecated_read_register_gen): Remove prototype.
(deprecated_write_register_gen): Likewise.
* remote-sim.c (gdbsim_store_register): Replace call to
deprecated_read_register_gen with regcache_cooked_read.
* target.c (debug_print_register): Replace calls to
deprecated_read_register_gen and read_register with
regcache_cooked_read.
2007-04-29 01:51:51 +00:00
Ulrich Weigand
482f7fee19
* config/rs6000/nm-rs6000.h (CHILD_SPECIAL_WAITSTATUS): Remove.
...
* rs6000-nat.c (rs6000_wait): New function.
(_initialize_core_rs6000): Install it as to_wait target method.
* target.c (store_waitstatus): Don't check CHILD_SPECIAL_WAITSTATUS.
2007-04-27 13:26:05 +00:00
Daniel Jacobowitz
8807d78bec
* Makefile.in (SFILES): Remove nlmread.c.
...
(COMMON_OBS): Remove nlmread.o.
(nlmread.o): Delete rule.
* README: Delete reference to remote-st.c.
* acinclude.m4 (CY_AC_TCL_LYNX_POSIX): Delete.
* defs.h (enum gdb_osabi): Delete GDB_OSABI_NETWARE and
GDB_OSABI_LYNXOS.
* i386-tdep.c (i386_nw_init_abi, i386_nlm_osabi_sniffer): Delete.
(_initialize_i386_tdep): Do not reference them.
* nlmread.c: Delete file.
* osabi.c (gdb_osabi_names): Remove NetWare and LynxOS.
* target.c: Doc update.
* thread.c: Delete commented include.
* config/alpha/tm-alpha.h: Doc update.
* gdb.texinfo (Startup): Delete references to some alternate
names for .gdbinit.
(Thread): Remove LynxOS reference.
(Tandem ST2000): Delete target-specific documentation.
* gdbint.texinfo (Symbol Handling): Remove mention of NLM.
(Target Architecture Definition): Remove mention of GDB_OSABI_NETWARE
and GDB_OSABI_LYNXOS.
* config/netware.exp: Delete file.
2007-03-30 12:57:44 +00:00
Ulrich Weigand
74174d2e39
* arch-utils.c (legacy_pc_in_sigtramp): Remove.
...
* arch-utils.h (legacy_pc_in_sigtramp): Remove.
* config/ia64/linux.mt (DEPRECATED_TM_FILE): Remove.
* config/ia64/tm-linux.h: Remove file.
* ia64-tdep.h (struct gdbarch_tdep): Add pc_in_sigtramp callback.
* ia64-tdep.c (ia64_sigtramp_frame_sniffer): Use it instead of
legacy_pc_in_sigtramp.
(ia64_gdbarch_init): Initialize tdep->pc_in_sigtramp.
* ia64-linux-tdep.c (ia64_linux_pc_in_sigtramp): Make static.
Remove func_name argument.
(ia64_linux_init_abi): Install it as tdep->pc_in_sigtramp.
* infrun.c (HAVE_STEPPABLE_WATCHPOINT): Do not redefine.
* target.c (update_current_target): Add to_have_steppable_watchpoint.
* target.h (struct target_ops): Add to_have_steppable_watchpoint.
(HAVE_STEPPABLE_WATCHPOINT): Define.
* config/ia64/linux.mh (NATDEPFILES): Remove core-aout.o.
* config/ia64/nm-linux.h (KERNEL_U_ADDR, U_REGS_OFFSET,
CANNOT_FETCH_REGISTER, CANNOT_STORE_REGISTER,
TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_STEPPABLE_WATCHPOINT,
STOPPED_BY_WATCHPOINT, target_stopped_data_address,
target_insert_watchpoint, target_remove_watchpoint): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* ia64-linux-nat.c (ia64_register_addr): Make static.
(ia64_cannot_fetch_register, ia64_cannot_store_register): Likewise.
(ia64_linux_insert_watchpoint): Make static. Remove ptid_p argument.
(ia64_linux_remove_watchpoint): Likewise. Add type argument.
(ia64_linux_stopped_data_address): Make static. Add target_ops.
(ia64_linux_stopped_by_watchpoint): Make static.
(ia64_linux_can_use_hw_breakpoint): New function.
(ia64_linux_fetch_register, ia64_linux_fetch_registers): Likewise.
(ia64_linux_store_register, ia64_linux_store_registers): Likewise.
(_initialize_ia64_linux_nat): Install register and watchpoint ops.
2007-03-28 18:56:07 +00:00
Daniel Jacobowitz
8944021f76
Reported by timeless@gmail.com:
...
* gdb/target.c (target_flash_erase): Do not return void value.
(target_flash_done): Likewise.
* gdb/cli/cli-cmds.c (source_command): Likewise.
Reported by timeless@gmail.com:
* wrapper.c (sim_target_parse_arg_array): Do not return void value.
2007-02-08 16:31:57 +00:00
Joel Brobecker
87680a1410
* target.c (maintenance_print_target_stack): New function.
...
(initialize_targets): Add new "maintenance print target-stack"
command.
2007-01-29 16:36:01 +00:00
Daniel Jacobowitz
08d8bcd7cf
From Nick Hudson:
...
* target.c (update_current_target): Correct typo.
* gdb.base/sigrepeat.exp: Correct error message.
2007-01-23 13:03:20 +00:00
Daniel Jacobowitz
6aba47ca06
Copyright updates for 2007.
2007-01-09 17:59:20 +00:00
Daniel Jacobowitz
ecde4882ba
2006-12-05 Adam Nemet <anemet@caviumnetworks.com>
...
* target.c (debug_to_remove_watchpoint): Call
to_remove_watchpoint. Print target_remove_watchpoint.
2006-12-05 20:38:13 +00:00
Daniel Jacobowitz
424163ea15
* Makefile.in (SFILES): Add new and missed files.
...
(target_descriptions_h): New.
(COMMON_OBS): Add target-descriptions.o.
(arch-utils.o, infcmd.o, remote.o, target.o): Update.
(target-descriptions.o): New.
* arch-utils.c (gdbarch_info_fill): Check for a target
description.
* target-descriptions.c, target-descriptions.h: New files.
* gdbarch.sh: Add target_desc to info. Declare it in gdbarch.h.
Correct typos.
(gdbarch_list_lookup_by_info): Check target_desc.
* gdbarch.c, gdbarch.h: Regenerated.
* target.c (update_current_target): Mention to_read_description.
(target_pre_inferior): Call target_clear_description.
(target_read_description): New.
* target.h (struct target_ops): Add to_read_description.
(target_read_description): New prototype.
* infcmd.c (post_create_inferior): Call target_find_description.
* remote.c (remote_open_1): Likewise.
(extended_remote_create_inferior): Add a comment.
(extended_remote_async_create_inferior): Likewise.
2006-11-28 22:10:26 +00:00
Vladimir Prus
4b5752d02f
gdb/
...
* memattr.h (enum mem_access_mode): New value
MEM_NONE.
* memattr.c (unknown_mem_attrib): New.
(inaccessible_by_default): New.
(show_inaccessible_by_default): New.
(lookup_mem_region): Check inaccessible_by_default.
(dummy_cmd): New.
(mem_set_cmdlist, mem_show_cmdlist): New.
(_initialize_mem): Register new "set" and "show"
commands.
* target.c (memory_xfer_partial): If memory type
is MEM_NONE, return an error.
Clip to region size when calling to_xfer_partial.
If upper limit of memory range is 0, don't clip
anything.
gdb/doc/
* gdb.texinfo (Memory Access Checking): New.
2006-11-21 16:50:16 +00:00
Daniel Jacobowitz
52bb452f80
gdb/
...
* gdbint.texinfo (Target Vector Definition): Move most
content into Existing Targets. Add a menu.
(Existing Targets): New section, moved from Target Vector
Definition. Use @subsection.
(Managing Execution State): New section.
gdb/doc/
* remote-sim.c (gdbsim_kill): Call target_mourn_inferior.
(gdbsim_load): Don't bother to adjust inferior_ptid here.
(gdbsim_create_inferior): Mark the simulator as running.
(gdbsim_open): Don't bother fetching registers. Mark
the target as not running.
(gdbsim_xfer): When the program is not running, pass memory
requests down.
(gdbsim_mourn_inferior): Mark the target as not running.
* target.c (target_mark_running, target_mark_exited): New.
* target.h (target_has_execution): Update the comment.
(target_mark_running, target_mark_exited): New prototypes.
2006-10-17 21:55:24 +00:00
Daniel Jacobowitz
9e35dae425
2006-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
...
Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (expprint.o, parse.o, target.o): Update.
* dwarf2loc.c (dwarf_expr_tls_address): Move body to
target_translate_tls_address. Call it.
* eval.c (evaluate_subexp_standard): Handle UNOP_MEMVAL_TLS.
* expprint.c (print_subexp_standard): Likewise.
(op_name_standard, dump_subexp_body_standard): Likewise.
* expression.h (enum exp_opcode): Add UNOP_MEMVAL_TLS.
(union exp_element): Add objfile.
* parse.c (write_exp_elt_objfile): New function.
(msym_tls_symbol_type): New.
(write_exp_msymbol): Handle TLS.
(operator_length_standard): Handle UNOP_MEMVAL_TLS.
(build_parse): Initialize msym_tls_symbol_type.
* parser-defs.h (write_exp_elt_objfile): New prototype.
* target.c (target_translate_tls_address): New.
* target.h (target_translate_tls_address): Add prototype.
2006-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.threads/tls-nodebug.c, gdb.threads/tls-nodebug.exp: New test.
2006-10-10 03:17:53 +00:00
Daniel Jacobowitz
a76d924dff
* Makefile.in (SFILES): Add target-memory.c.
...
(COMMON_OBS): Add target-memory.o.
* memattr.c (lookup_mem_region): Adjust handling for
the top of memory. Improve comments.
* remote.c (packet_check_result): New function, split out
from packet_ok. Recognize "E." as an error prefix.
(packet_ok): Use it.
(remote_write_bytes_aux): New function, renamed from
remote_write_bytes. Take packet header, packet format,
and length flag as arguments.
(remote_write_bytes): Rewrite to use remote_write_bytes_aux.
(remote_send_printf, restore_remote_timeout)
(remote_flash_timeout, remote_flash_erase, remote_flash_write)
(remote_flash_done): New.
(remote_xfer_partial): Handle flash writes.
(init_remote_ops, init_remote_async_ops): Set to_flash_erase
and to_flash_done.
* symfile.c (struct load_section_data): Include a pointer to
the cumulative stats and a request queue. Move most members
to other types.
(struct load_progress_data, struct load_progress_section_data): New
types.
(load_progress): Handle a NULL baton and zero bytes. Update for
type changes.
(load_section_callback): Create memory write requests instead of
writing to memory. Don't print the progress message here.
(clear_memory_write_data): New function.
(generic_load): Use target_write_memory_blocks.
* target-memory.c: New file.
* target.c (update_current_target): Mention new uninherited methods.
(memory_xfer_partial): Issue an error for flash writes.
(target_flash_erase, target_flash_done): New functions.
(target_write_with_progress): Call the progress callback at the
start also.
* target.h (enum target_object): Add TARGET_OBJECT_FLASH.
(target_write_with_progress): Update comment.
(struct target_ops): Add to_flash_erase and to_flash_done.
(target_flash_erase, target_flash_done, struct memory_write_request)
(memory_write_request_s, enum flash_preserve_mode)
(target_write_memory_blocks): New, including a vector type
for memory_write_request_s.
2006-09-21 14:00:53 +00:00
Daniel Jacobowitz
fd79eceebf
gdb/
...
2006-09-21 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* Makefile.in (SFILES): Add memory-map.c and xml-support.c.
(memory_map_h, xml_support_h): New.
(target_h): Add vec_h dependency.
(COMMON_OBS): Add memory-map.o and xml-support.o.
(memory-map.o, xml-support.o): New rules.
(remote.o): Update.
* exceptions.h (enum errors): Add XML_PARSE_ERROR.
* infcmd.c (run_command_1, attach_command): Call target_pre_inferior.
* memattr.c (default_mem_attrib): Initialize blocksize.
(target_mem_region_list, mem_use_target)
(target_mem_regions_valid, mem_region_cmp, mem_region_init)
(require_user_regions, require_target_regions)
(invalidate_target_mem_regions): New.
(create_mem_region): Use mem_region_init.
(mem_clear): Move higher.
(lookup_mem_region): Use require_target_regions.
(mem_command): Implement "mem auto".
(mem_info_command): Handle target-supplied regions and flash
attributes.
(mem_enable_command, mem_disable_command, mem_delete_command): Use
require_user_regions.
(_initialize_mem): Mention "mem auto" in help.
* memattr.h (enum mem_access_mode): Add MEM_FLASH.
(struct mem_attrib): Add blocksize.
(invalidate_target_mem_regions, mem_region_init, mem_region_cmp): New
prototypes.
* remote.c: Include "memory-map.h".
(PACKET_qXfer_memory_map): New enum value.
(remote_protocol_features): Add qXfer:memory-map:read.
(remote_xfer_partial): Handle memory maps.
(remote_memory_map): New.
(init_remote_ops, init_remote_async_ops): Set to_memory_map.
(_initialize_remote): Register qXfer:memory-map:read.
* target.c (update_current_target): Mention to_memory_map.
(target_memory_map, target_pre_inferior): New.
(target_preopen): Call target_pre_inferior.
* target.h: Include "vec.h".
(enum target_object): Add TARGET_OBJECT_MEMORY_MAP.
(struct target_ops): Add to_memory_map.
(target_memory_map, target_pre_inferior): New prototypes.
* memory-map.c, memory-map.h, xml-support.c, xml-support.h: New files.
gdb/doc/
2006-09-21 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
* gdb.texinfo (Memory Region Attributes): Mention target-supplied
memory regions and "mem auto".
2006-09-21 13:54:03 +00:00
Daniel Jacobowitz
2bc416ba69
* remote.c, target.c: Strip trailing whitespace.
2006-08-16 18:31:03 +00:00
Daniel Jacobowitz
cf7a04e8fb
PR remote/1966
...
* dcache.c (dcache_write_line): Use target_write.
(dcache_read_line): Use target_read.
* mi/mi-main.c (mi_cmd_data_read_memory): Use target_read.
* symfile.c (struct load_section_data): Add new per-section
members.
(load_progress): New function.
(load_section_callback): Pass load_progress to the new
target_write_with_progress.
* target.c (current_xfer_partial, memory_xfer_partial): New.
(target_xfer_partial): New prototype.
(target_xfer_memory, target_xfer_partial_p, xfer_using_stratum)
(do_xfer_memory, target_xfer_memory_partial)
(target_read_memory_partial, target_write_memory_partial): Delete.
(trust_readonly): Move higher in the file.
(update_current_target): Use current_xer_partial.
(target_xfer_partial): Use memory_xfer_partial. Handle
TARGET_OBJECT_RAW_MEMORY specially.
(target_read_memory): Use target_read.
(target_write_memory): Use target_write.
(default_xfer_partial): Call to_xfer_partial directly.
(target_write_with_progress): New function, based on target_write.
(target_write): Call it.
* target.h (enum target_object): Add TARGET_OBJECT_RAW_MEMORY.
(target_write_with_progress): New prototype.
(do_xfer_memory, target_read_memory_partial)
(target_write_memory_partial): Delete prototypes.
2006-08-15 18:46:25 +00:00
Daniel Jacobowitz
159f81f32f
* target.h (target_read_stralloc): New prototype.
...
* target.c (target_read_alloc_1): Renamed from target_read_alloc.
Take new PADDING argument.
(target_read_alloc): Use it.
(target_read_stralloc): New function.
2006-07-27 21:23:42 +00:00
Vladimir Prus
4ecb6f279b
2006-07-18 Vladimir Prus <vladimir@codesourcery.com>
...
* target.c (tcomplain): Mark with ATTR_NORETURN.
2006-07-18 12:44:48 +00:00
Daniel Jacobowitz
13547ab600
* target.c (target_read): Stop if target_read_partial returns 0
...
when some bytes have already been read.
(target_write): Likewise for target_write_partial.
(target_read_partial, target_write_partial): Make static.
(target_read_alloc): New.
* target.h: Doc fixes.
(target_read_partial, target_write_partial): Delete prototypes.
(target_read_alloc): New prototype.
* auxv.c (target_auxv_read): Delete.
(target_auxv_search, fprint_target_auxv): Use target_read_alloc.
* auxv.h (target_auxv_read): Delete prototype.
* avr-tdep.c (avr_io_reg_read_command): Use target_read_alloc.
* ia64-tdep.c (getunwind_table, get_kernel_table): Likewise.
* linux-nat.c (linux_nat_make_corefile_notes): Likewise.
* procfs.c (procfs_make_note_section): Likewise.
* remote.c (remote_xfer_partial): Don't loop here.
* sparc-tdep.c (sparc_fetch_wcookie): Use target_read.
2006-07-12 18:13:45 +00:00
Daniel Jacobowitz
597320e75b
* remote.c (remote_disconnect): Add TARGET argument.
...
* target.c (debug_to_disconnect): Delete.
(update_current_target): Do not inherit to_disconnect.
(target_disconnect): Search for a target to implement to_disconnect.
(setup_target_debug): Do not reference to_disconnect.
* target.h (struct target_ops): Add target argument to
to_disconnect.
2006-05-05 20:08:45 +00:00
Daniel Jacobowitz
8181d85fdc
gdb/
...
* breakpoint.c (deprecated_read_memory_nobpt): Update to use
shadow_len.
(insert_bp_location, reattach_breakpoints, remove_breakpoint)
(delete_breakpoint): Update calls to changed methods.
(deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint)
(single_step_breakpoints, insert_single_step_breakpoint)
(remove_single_step_breakpoints): New.
* breakpoint.h (struct bp_target_info): New.
(struct bp_location): Replace shadow_contents with
target_info and overlay_target_info.
(deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint)
(insert_single_step_breakpoint, remove_single_step_breakpoints): New
prototypes.
* gdbarch.sh: Forward declare struct bp_target_info in gdbarch.h.
(memory_insert_breakpoint, memory_remove_breakpoint): Update second
argument.
* mem-break.c (default_memory_insert_breakpoint): Update. Set
placed_address, placed_size, and shadow_len.
(default_memory_remove_breakpoint): Update. Don't use
BREAKPOINT_FROM_PC.
(memory_insert_breakpoint, memory_remove_breakpoint): Update.
* target.c (update_current_target): Update prototypes for changed
functions.
(debug_to_insert_breakpoint, debug_to_remove_breakpoint)
(debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint):
Update.
* target.h: Forward declare struct bp_target_info.
(struct target_ops): Use a bp_target_info argument for
to_insert_breakpoint, to_remove_breakpoint,
to_insert_hw_breakpoint, and to_remove_hw_breakpoint.
(target_insert_breakpoint, target_remove_breakpoint)
(target_insert_hw_breakpoint, target_remove_hw_breakpoint)
(memory_insert_breakpoint, memory_remove_breakpoint)
(default_memory_insert_breakpoint, default_memory_remove_breakpoint):
Update.
* config/i386/nm-i386.h: Forward declare struct bp_target_info.
(i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update.
(target_insert_hw_breakpoint, target_remove_hw_breakpoint): Likewise.
* gdbarch.c, gdbarch.h: Regenerated.
* alpha-tdep.c (alpha_software_single_step): Use
insert_single_step_breakpoint and remove_single_step_breakpoints.
Remove unused statics.
* arm-tdep.c (arm_software_single_step): Likewise. Add a note.
* cris-tdep.c (cris_software_single_step): Likewise.
* mips-tdep.c (mips_software_single_step): Likewise.
* rs6000-tdep.c (rs6000_software_single_step): Likewise.
* sparc-tdep.c (sparc_software_single_step): Likewise.
* wince.c (struct thread_info_struct): Remove step_prev.
(undoSStep): Use remove_single_step_breakpoints.
(wince_software_single_step): Use insert_single_step_breakpoint.
* corelow.c (ignore): Remove unneeded prototype. Update arguments.
* exec.c (ignore): Likewise.
* sol-thread.c (ignore): Likewise.
* procfs.c (dbx_link_shadow_contents): Delete.
(dbx_link_bpt): New.
(procfs_mourn_inferior): Remove it if necessary.
(remove_dbx_link_breakpoint): Use it.
(insert_dbx_link_bpt_in_file): Set it.
(procfs_init_inferior): Don't update dbx_link_bpt_addr.
* rs6000-nat.c (exec_one_dummy_insn): Use
deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint.
* solib-irix.c (shadow_contents, breakpoint_addr): Delete.
(base_breakpoint): New.
(disable_break): Use it.
(enable_break): Set it.
* i386-nat.c (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint):
Update.
* ia64-tdep.c (ia64_memory_insert_breakpoint)
(ia64_memory_remove_breakpoint): Likewise.
* m32r-tdep.c (m32r_memory_insert_breakpoint)
(m32r_memory_remove_breakpoint): Likewise.
* monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
Likewise. Remove unnecessary prototypes. Use placed_address
and placed_size. Removed useless read from memory.
* nto-procfs.c (procfs_insert_breakpoint)
(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
(procfs_remove_hw_breakpoint): Update.
* ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise.
* ocd.h (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Likewise.
* remote-e7000.c (e7000_insert_breakpoint)
(e7000_remove_breakpoint): Likewise.
* remote-m32r-sdi.c (m32r_insert_breakpoint)
(m32r_remove_breakpoint): Likewise.
* remote-mips.c (mips_insert_breakpoint)
(mips_remove_breakpoint): Likewise.
* remote-rdp.c (remote_rdp_insert_breakpoint)
(remote_rdp_remove_breakpoint): Likewise.
(rdp_step): Use deprecated_insert_raw_breakpoint and
deprecated_remove_raw_breakpoint.
* remote-sds.c (sds_insert_breakpoint, sds_remove_breakpoint):
Update.
* remote-sim.c (gdbsim_insert_breakpoint, gdbsim_remove_breakpoint):
Delete.
(init_gdbsim_ops): Use memory_insert_breakpoint and
memory_remove_breakpoint.
* remote-st.c (st2000_insert_breakpoint)
(st2000_remove_breakpoint): Update. Remove unused
BREAKPOINT_FROM_PC.
* remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
Update. Use placed_address and placed_size.
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise.
gdb/doc/
* gdbint.texinfo (x86 Watchpoints, Target Conditionals): Update insert
and remove breakpoint prototypes.
(Watchpoints): Move description of target_insert_hw_breakpoint and
target_remove_hw_breakpoint ...
(Breakpoints): ... to here. Document target_insert_breakpoint and
target_remove_breakpoint.
2006-04-18 19:20:08 +00:00
Michael Snyder
88c231eb7f
2006-03-16 Michael Snyder <msnyder@redhat.com>
...
* target.c (push_target): Fix typo in comment.
2006-03-17 00:30:34 +00:00
Wu Zhou
2a3cdf79c3
* breakpoint.c (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Delete.
...
* config/i386/nm-i386sol2.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New.
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
* config/mips/nm-irix5.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New.
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
* config/sparc/nm-sol2.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New.
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
* inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): New.
(inf_ttrace_region_size_ok_for_hw_watchpoint): Delete.
(inf_ttrace_target): Delete to_region_size_ok_for_hw_watchpoint and
add to_region_ok_for_hw_watchpoint.
* s390-nat.c (s390_region_size_ok_for_hw_watchpoint): Delete.
(s390_region_ok_for_hw_watchpoint): New.
(_initialize_s390_nat): Delete to_region_size_ok_for_hw_watchpoint
and add to_region_ok_for_hw_watchpoint.
* target.c (default_region_size_ok_for_hw_watchpoint,
debug_to_region_size_ok_for_hw_watchpoint): Delete prototype.
(update_current_target): Delete to_region_size_ok_for_hw_watchpoint
inheritance and default_region_size_ok_for_hw_watchpoint.
(default_region_ok_for_hw_watchpoint): If len is less than or equal
the length of void pointer, return ok.
(default_region_size_ok_for_hw_watchpoint): Delete.
(debug_to_region_size_ok_for_hw_watchpoint): Delete.
(setup_target_debug): Delete to_region_size_ok_for_hw_watchpoint.
* target.h (struct target_ops): Delete
to_region_size_ok_for_hw_watchpoint.
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
2006-02-08 06:43:00 +00:00
Wu Zhou
e0d24f8d6e
* ppc-linux-nat.c (PTRACE_GET_DEBUGREG, PTRACE_SET_DEBUGREG,
...
PTRACE_GETSIGINFO): Define.
(last_stopped_data_address): New.
(ppc_linux_check_watch_resources): New function.
(ppc_linux_region_ok_for_hw_watchpoint): New function.
(ppc_linux_insert_watchpoint): New function.
(ppc_linux_remove_watchpoint): New function.
(ppc_linux_stopped_data_address): New function.
(ppc_linux_stopped_by_watchpoint): New function.
(_initialize_ppc_linux_nat): Set the above hardware watchpoint
related target vectors.
* rs6000-tdep.c (rs6000_gdbarch_init): Set PPC architectures
to have nonsteppable watchpoint.
* target.c (default_region_ok_for_hw_watchpoint,
debug_to_region_ok_for_hw_watchpoint): New prototypes.
(update_current_target): Inherit to_region_ok_for_hw_watchpoint
and set default to_region_ok_for_hw_watchpoint.
(default_region_ok_for_hw_watchpoint): New function.
(debug_to_region_ok_for_hw_watchpoint): New function.
(setup_target_debug): Set to_region_ok_for_hw_watchpoint of
debug_target.
* target.h (struct target_ops): Add a new target vector
to_region_ok_for_hw_watchpoint.
(TARGET_REGION_OK_FOR_HW_WATCHPOINT): Define this if it is not
defined anyplace else.
2006-02-08 05:41:06 +00:00
Mark Kettenis
f6519ebcfe
* target.h (target_read_memory_partial, target_write_memory_partial):
...
Change second argument to 'gdb_byte *'.
* target.c (target_xfer_memory_partial): Change third argument to
'gdb_byte *'.
(target_read_memory_partial, target_write_memory_partial): Change
second argument to 'gdb_byte *'.
2006-01-10 22:38:51 +00:00
Eli Zaretskii
197e01b6dc
* breakpoint.c:
...
* arm-tdep.c:
* ia64-tdep.c:
* i386-tdep.c:
* hpread.c:
* hppa-tdep.c:
* hppa-hpux-tdep.c:
* gnu-nat.c:
* gdbtypes.c:
* gdbarch.h:
* gdbarch.c:
* eval.c:
* dwarf2read.c:
* dbxread.c:
* copying:
* symfile.c:
* stabsread.c:
* sh64-tdep.c:
* sh-tdep.c:
* s390-tdep.c:
* rs6000-tdep.c:
* remote.c:
* remote-mips.c:
* mips-tdep.c:
* mdebugread.c:
* linux-nat.c:
* infrun.c:
* xcoffread.c:
* win32-nat.c:
* valops.c:
* utils.c:
* tracepoint.c:
* target.c:
* symtab.c:
* c-exp.y:
* ada-valprint.c:
* ada-typeprint.c:
* ada-lex.l:
* ada-lang.h:
* ada-lang.c:
* ada-exp.y:
* alphafbsd-tdep.c:
* alphabsd-tdep.h:
* alphabsd-tdep.c:
* alphabsd-nat.c:
* alpha-tdep.h:
* alpha-tdep.c:
* alpha-osf1-tdep.c:
* alpha-nat.c:
* alpha-mdebug-tdep.c:
* alpha-linux-tdep.c:
* alpha-linux-nat.c:
* aix-thread.c:
* abug-rom.c:
* arch-utils.c:
* annotate.h:
* annotate.c:
* amd64obsd-tdep.c:
* amd64obsd-nat.c:
* amd64nbsd-tdep.c:
* amd64nbsd-nat.c:
* amd64fbsd-tdep.c:
* amd64fbsd-nat.c:
* amd64bsd-nat.c:
* amd64-tdep.h:
* amd64-tdep.c:
* amd64-sol2-tdep.c:
* amd64-nat.h:
* amd64-nat.c:
* amd64-linux-tdep.c:
* amd64-linux-nat.c:
* alphanbsd-tdep.c:
* block.h:
* block.c:
* bfd-target.h:
* bfd-target.c:
* bcache.h:
* bcache.c:
* ax.h:
* ax-general.c:
* ax-gdb.h:
* ax-gdb.c:
* avr-tdep.c:
* auxv.h:
* auxv.c:
* armnbsd-tdep.c:
* armnbsd-nat.c:
* arm-tdep.h:
* arm-linux-nat.c:
* arch-utils.h:
* charset.c:
* call-cmds.h:
* c-valprint.c:
* c-typeprint.c:
* c-lang.h:
* c-lang.c:
* buildsym.h:
* buildsym.c:
* bsd-uthread.h:
* bsd-uthread.c:
* bsd-kvm.h:
* bsd-kvm.c:
* breakpoint.h:
* core-regset.c:
* core-aout.c:
* completer.h:
* completer.c:
* complaints.h:
* complaints.c:
* command.h:
* coffread.c:
* coff-solib.h:
* coff-solib.c:
* coff-pe-read.h:
* coff-pe-read.c:
* cli-out.h:
* cli-out.c:
* charset.h:
* dink32-rom.c:
* dictionary.h:
* dictionary.c:
* demangle.c:
* defs.h:
* dcache.h:
* dcache.c:
* d10v-tdep.c:
* cpu32bug-rom.c:
* cp-valprint.c:
* cp-support.h:
* cp-support.c:
* cp-namespace.c:
* cp-abi.h:
* cp-abi.c:
* corelow.c:
* corefile.c:
* environ.c:
* elfread.c:
* dwarfread.c:
* dwarf2loc.c:
* dwarf2expr.h:
* dwarf2expr.c:
* dwarf2-frame.h:
* dwarf2-frame.c:
* dve3900-rom.c:
* dummy-frame.h:
* dummy-frame.c:
* dsrec.c:
* doublest.h:
* doublest.c:
* disasm.h:
* disasm.c:
* fork-child.c:
* findvar.c:
* fbsd-nat.h:
* fbsd-nat.c:
* f-valprint.c:
* f-typeprint.c:
* f-lang.h:
* f-lang.c:
* expression.h:
* expprint.c:
* exec.h:
* exec.c:
* exceptions.h:
* exceptions.c:
* event-top.h:
* event-top.c:
* event-loop.h:
* event-loop.c:
* gdb.c:
* gdb-stabs.h:
* gdb-events.h:
* gdb-events.c:
* gcore.c:
* frv-tdep.h:
* frv-tdep.c:
* frv-linux-tdep.c:
* frame.h:
* frame.c:
* frame-unwind.h:
* frame-unwind.c:
* frame-base.h:
* frame-base.c:
* gdb_vfork.h:
* gdb_thread_db.h:
* gdb_string.h:
* gdb_stat.h:
* gdb_regex.h:
* gdb_ptrace.h:
* gdb_proc_service.h:
* gdb_obstack.h:
* gdb_locale.h:
* gdb_dirent.h:
* gdb_curses.h:
* gdb_assert.h:
* gdbarch.sh:
* gdb.h:
* hpux-thread.c:
* hppabsd-nat.c:
* hppa-tdep.h:
* hpacc-abi.c:
* h8300-tdep.c:
* gregset.h:
* go32-nat.c:
* gnu-v3-abi.c:
* gnu-v2-abi.h:
* gnu-v2-abi.c:
* gnu-nat.h:
* glibc-tdep.c:
* gdbtypes.h:
* gdbcore.h:
* gdbcmd.h:
* i386nbsd-tdep.c:
* i386nbsd-nat.c:
* i386gnu-tdep.c:
* i386gnu-nat.c:
* i386fbsd-tdep.c:
* i386fbsd-nat.c:
* i386bsd-tdep.c:
* i386bsd-nat.h:
* i386bsd-nat.c:
* i386-tdep.h:
* i386-sol2-nat.c:
* i386-nto-tdep.c:
* i386-nat.c:
* i386-linux-tdep.h:
* i386-linux-tdep.c:
* i386-linux-nat.c:
* i386-cygwin-tdep.c:
* inf-ttrace.c:
* inf-ptrace.h:
* inf-ptrace.c:
* inf-loop.h:
* inf-loop.c:
* inf-child.h:
* inf-child.c:
* ia64-tdep.h:
* ia64-linux-nat.c:
* i387-tdep.h:
* i387-tdep.c:
* i386v4-nat.c:
* i386v-nat.c:
* i386obsd-tdep.c:
* i386obsd-nat.c:
* kod.c:
* jv-valprint.c:
* jv-typeprint.c:
* jv-lang.h:
* jv-lang.c:
* irix5-nat.c:
* iq2000-tdep.c:
* interps.h:
* interps.c:
* inftarg.c:
* inflow.h:
* inflow.c:
* inferior.h:
* infcmd.c:
* infcall.h:
* infcall.c:
* inf-ttrace.h:
* m32r-tdep.h:
* m32r-tdep.c:
* m32r-rom.c:
* m32r-linux-tdep.c:
* m32r-linux-nat.c:
* m2-valprint.c:
* m2-typeprint.c:
* m2-lang.h:
* m2-lang.c:
* lynx-nat.c:
* linux-thread-db.c:
* linux-nat.h:
* linespec.c:
* libunwind-frame.h:
* libunwind-frame.c:
* language.h:
* language.c:
* macroexp.c:
* macrocmd.c:
* m88kbsd-nat.c:
* m88k-tdep.h:
* m88k-tdep.c:
* m68klinux-tdep.c:
* m68klinux-nat.c:
* m68kbsd-tdep.c:
* m68kbsd-nat.c:
* m68k-tdep.h:
* m68k-tdep.c:
* mips-linux-nat.c:
* mips-irix-tdep.c:
* minsyms.c:
* memattr.h:
* memattr.c:
* mem-break.c:
* mdebugread.h:
* main.h:
* main.c:
* macrotab.h:
* macrotab.c:
* macroscope.h:
* macroscope.c:
* macroexp.h:
* nbsd-tdep.c:
* mt-tdep.c:
* monitor.h:
* monitor.c:
* mn10300-tdep.h:
* mn10300-tdep.c:
* mn10300-linux-tdep.c:
* mipsv4-nat.c:
* mipsread.c:
* mipsnbsd-tdep.h:
* mipsnbsd-tdep.c:
* mipsnbsd-nat.c:
* mips64obsd-tdep.c:
* mips64obsd-nat.c:
* mips-tdep.h:
* mips-mdebug-tdep.c:
* mips-linux-tdep.c:
* osabi.h:
* osabi.c:
* ocd.h:
* ocd.c:
* observer.c:
* objfiles.h:
* objfiles.c:
* objc-lang.h:
* objc-lang.c:
* objc-exp.y:
* nto-tdep.h:
* nto-tdep.c:
* nto-procfs.c:
* nlmread.c:
* nbsd-tdep.h:
* ppcobsd-tdep.c:
* ppcobsd-nat.c:
* ppcnbsd-tdep.h:
* ppcnbsd-tdep.c:
* ppcnbsd-nat.c:
* ppcbug-rom.c:
* ppc-tdep.h:
* ppc-sysv-tdep.c:
* ppc-linux-tdep.c:
* ppc-linux-nat.c:
* ppc-bdm.c:
* parser-defs.h:
* parse.c:
* p-valprint.c:
* p-typeprint.c:
* p-lang.h:
* p-lang.c:
* remote-fileio.h:
* remote-fileio.c:
* remote-est.c:
* remote-e7000.c:
* regset.h:
* regset.c:
* reggroups.h:
* reggroups.c:
* regcache.h:
* regcache.c:
* proc-why.c:
* proc-service.c:
* proc-events.c:
* printcmd.c:
* ppcobsd-tdep.h:
* sentinel-frame.h:
* sentinel-frame.c:
* scm-valprint.c:
* scm-tags.h:
* scm-lang.h:
* scm-lang.c:
* scm-exp.c:
* s390-tdep.h:
* rom68k-rom.c:
* remote.h:
* remote-utils.c:
* remote-st.c:
* remote-sim.c:
* remote-sds.c:
* remote-rdp.c:
* remote-rdi.c:
* remote-hms.c:
* sim-regno.h:
* shnbsd-tdep.h:
* shnbsd-tdep.c:
* shnbsd-nat.c:
* sh-tdep.h:
* serial.h:
* serial.c:
* ser-unix.h:
* ser-unix.c:
* ser-tcp.c:
* ser-pipe.c:
* ser-go32.c:
* ser-e7kpc.c:
* ser-base.h:
* ser-base.c:
* solib.c:
* solib-svr4.h:
* solib-svr4.c:
* solib-sunos.c:
* solib-som.h:
* solib-som.c:
* solib-pa64.h:
* solib-pa64.c:
* solib-osf.c:
* solib-null.c:
* solib-legacy.c:
* solib-irix.c:
* solib-frv.c:
* solib-aix5.c:
* sol-thread.c:
* sparc64-linux-tdep.c:
* sparc64-linux-nat.c:
* sparc-tdep.h:
* sparc-tdep.c:
* sparc-sol2-tdep.c:
* sparc-sol2-nat.c:
* sparc-nat.h:
* sparc-nat.c:
* sparc-linux-tdep.c:
* sparc-linux-nat.c:
* source.h:
* source.c:
* somread.c:
* solist.h:
* solib.h:
* std-regs.c:
* stack.h:
* stack.c:
* stabsread.h:
* sparcobsd-tdep.c:
* sparcnbsd-tdep.c:
* sparcnbsd-nat.c:
* sparc64obsd-tdep.c:
* sparc64nbsd-tdep.c:
* sparc64nbsd-nat.c:
* sparc64fbsd-tdep.c:
* sparc64fbsd-nat.c:
* sparc64-tdep.h:
* sparc64-tdep.c:
* sparc64-sol2-tdep.c:
* sparc64-nat.c:
* ui-file.c:
* typeprint.h:
* typeprint.c:
* tramp-frame.h:
* tramp-frame.c:
* trad-frame.h:
* trad-frame.c:
* tracepoint.h:
* top.c:
* tobs.inc:
* thread.c:
* terminal.h:
* target.h:
* symfile.h:
* stop-gdb.c:
* vaxbsd-nat.c:
* vax-tdep.h:
* vax-tdep.c:
* vax-nat.c:
* varobj.h:
* varobj.c:
* value.h:
* value.c:
* valprint.h:
* valprint.c:
* v850-tdep.c:
* uw-thread.c:
* user-regs.c:
* ui-out.h:
* ui-out.c:
* ui-file.h:
* xcoffsolib.h:
* xcoffsolib.c:
* wrapper.c:
* wince.c:
* wince-stub.h:
* wince-stub.c:
* vaxobsd-tdep.c:
* vaxnbsd-tdep.c:
* gdb_gcore.sh:
* copying.c:
* configure.ac:
* aclocal.m4:
* acinclude.m4:
* reply_mig_hack.awk:
* observer.sh:
* gdb_mbuild.sh:
* arm-linux-tdep.c:
* blockframe.c:
* dbug-rom.c:
* environ.h:
* dwarf2loc.h:
* gdb-events.sh:
* glibc-tdep.h:
* gdb_wait.h:
* gdbthread.h:
* i386-sol2-tdep.c:
* hppabsd-tdep.c:
* hppa-linux-nat.c:
* hppa-hpux-nat.c:
* ia64-linux-tdep.c:
* infptrace.c:
* linespec.h:
* maint.c:
* mips-mdebug-tdep.h:
* remote-m32r-sdi.c:
* s390-nat.c:
* rs6000-nat.c:
* remote-utils.h:
* sh3-rom.c:
* sh-linux-tdep.c:
* top.h:
* symtab.h:
* symmisc.c:
* symfile-mem.c:
* srec.h:
* user-regs.h:
* version.h:
* valarith.c:
* xstormy16-tdep.c:
* wrapper.h:
* Makefile.in:
* f-exp.y:
* cris-tdep.c:
* cp-name-parser.y:
* procfs.c:
* proc-utils.h:
* proc-flags.c:
* proc-api.c:
* p-exp.y:
* m68hc11-tdep.c:
* m2-exp.y:
* kod.h:
* kod-cisco.c:
* jv-exp.y:
* hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF
address.
2005-12-17 22:34:03 +00:00
Jim Blandy
12c7def667
gdb/ChangeLog:
...
2005-12-07 Jim Blandy <jimb@redhat.com>
* target.c (target_xfer_memory_partial): Doc fix.
2005-12-07 19:35:43 +00:00
Daniel Jacobowitz
ee05721234
* inf-child.c (inf_child_follow_fork): Add OPS argument.
...
* inf-ptrace.c (inf_ptrace_follow_fork): Likewise.
* inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
* inftarg.c (child_follow_fork): Likewise.
* linux-nat.c (child_follow_fork): Likewise. Use ops instead of
&deprecated_child_ops.
* target.c (update_current_target): Do not inherit to_follow_fork.
(target_follow_fork): New function.
(debug_to_follow_fork): Remove.
(setup_target_debug): Don't set to_follow_fork.
* target.h (struct target_ops): Add struct target_ops * to
to_follow_fork.
(child_follow_fork): Add struct target_ops * argument.
(target_follow_fork): Replace macro with prototype.
2005-09-04 16:18:20 +00:00
Mark Kettenis
5fff8fc01d
* target.c (normal_pid_to_str): Use xsnprintf instead of snprintf.
...
* bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
* inf-ttrace.c (inf_ttrace_pid_to_str): Likewise.
2005-07-18 21:00:50 +00:00
Daniel Jacobowitz
c6826062e5
* dwarf2-frame.c (dwarf2_frame_prev_register): Use gdb_byte.
...
* i386-linux-nat.c (fetch_register, store_register, supply_gregset)
(fill_gregset): Likewise.
* i386-tdep.c (i386_frame_prev_register)
(i386_sigtramp_frame_prev_register): Likewise.
* linux-nat.c (linux_nat_xfer_memory, linux_nat_make_corefile_notes):
Likewise.
* linux-thread-db.c (thread_db_xfer_memory): Likewise.
* remote.c (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint):
Likewise.
* target.c (debug_to_insert_hw_breakpoint)
(debug_to_remove_hw_breakpoint, update_current_target): Likewise.
2005-05-28 16:44:29 +00:00
Mark Kettenis
961cb7b5cc
* corelow.c (core_xfer_partial): Change type of readbuf and
...
writebuf to `gdb_byte *'.
* sparc-nat.c (sparc_xfer_wcookie, sparc_xfer_partial): Change
type of readbuf and writebuf to `gdb_byte *'.
* bsd-uthread.c (bsd_uthread_xfer_partial): Change type of readbuf
and writebuf to `gdb_byte *'.
* inf-ptrace.c (inf_ptrace_xfer_partial): Change type of readbuf
and writebuf to `gdb_byte *'.
* bsd-kvm.c (bsd_kvm_xfer_memory): Replace.
(bsd_kvm_xfer_partial): New function.
(bsd_kvm_add_target): Set to_xfer_partial instead of
to_xfer_memory.
* bfd-target.c (target_bfd_xfer_partial): Change type of readbuf
and writebuf to `gdb_byte *'.
* target.c (deprecated_debug_xfer_memory): Remove prototype.
(deprecated_debug_xfer_memory): Change type of second argument to
`gdb_byte *'.
* remote.c (remote_xfer_memory): Remove prototype.
(remote_xfer_memory): Change type of second argument to `gdb_byte
*'.
(remote_xfer_partial): Change type of readbuf and writebuf to
`gdb_byte *'.
2005-05-16 16:36:24 +00:00
Andrew Cagney
1b0ba10226
2005-05-16 Andrew Cagney <cagney@gnu.org>
...
* target.h (target_read_partial, target_write_partial)
(do_xfer_memory, xfer_memory, target_read, target_write)
(get_target_memory): For buffers, change "void*" to gdb_byte.
(struct target_ops): Ditto for to_xfer_partial and
deprecated_xfer_memory.
* dcache.h (dcache_xfer_memory): Ditto.
* target.c (default_xfer_partial, target_read_partial)
(target_write_partial, target_read, target_write)
(do_xfer_memory, update_current_target, get_target_memory): Update.
(target_read_string): Change buf to a gdb_byte.
* dcache.c (dcache_xfer_memory): Update.
* exec.c (xfer_memory): Make buffer type to gdb_byte.
* mem-break.c (default_memory_insert_breakpoint): Remove cast.
* disasm.c (dis_asm_read_memory): Remove cast, use gdb_byte.
2005-05-16 04:45:43 +00:00
Andrew Cagney
fc1a4b4705
2005-05-09 Andrew Cagney <cagney@gnu.org>
...
Use gdb_byte in preference to bfd_byte.
* gdbarch.sh: Update.
* gdbarch.h, gdbarch.c: Re-generate.
* ada-lang.c, ada-lang.h, ada-valprint.c, arch-utils.c: Update.
* c-lang.c, c-lang.h, c-valprint.c, cp-valprint.c: Update.
* f-lang.c, f-lang.h, f-valprint.c, gdbcore.h, jv-lang.h: Update.
* jv-valprint.c, language.c, language.h, m2-lang.c: Update.
* m2-lang.h, m2-valprint.c, objc-lang.c, p-lang.c: Update.
* p-lang.h, p-valprint.c, regcache.c, scm-lang.c: Update.
* scm-lang.h, scm-valprint.c, target.c, target.h: Update.
* tramp-frame.c, valarith.c, valops.c, valprint.c: Update.
* valprint.h, value.c, value.h: Update.
2005-05-09 21:20:35 +00:00
Mark Kettenis
9cedd1a6ad
* target.h (target_link): Remove prototype.
...
* target.c (target_link): Remove function.
* symfile.c: Remove comment about rombug.
2005-05-08 14:46:52 +00:00
Andrew Cagney
5a168c78ef
2005-05-01 Andrew Cagney <cagney@gnu.org>
...
* gdbarch.sh (deprecated_extract_return_value)
(breakpoint_from_pc, deprecated_store_return_value)
(memory_insert_breakpoint, memory_remove_breakpoint): Change type
of buffer to a bfd_byte pointer.
* gdbarch.h, gdbarch.c: Re-generate.
* mem-break.c (memory_insert_breakpoint)
(memory_remove_breakpoint, default_memory_insert_breakpoint)
(default_memory_remove_breakpoint): Update.
* target.h (memory_insert_breakpoint)
(memory_remove_breakpoint, default_memory_insert_breakpoint)
(default_memory_remove_breakpoint): Update declarations.
(struct target_ops): Update to_insert_breakpoint and
to_remove_breakpoint.
* target.c (debug_to_remove_breakpoint)
(debug_to_insert_breakpoint): Update.
* remote-m32r-sdi.c (m32r_remove_breakpoint)
(m32r_insert_breakpoint): Update.
* m32r-tdep.c (m32r_memory_insert_breakpoint)
(m32r_memory_remove_breakpoint): Update.
* remote-e7000.c (e7000_insert_breakpoint)
(e7000_remove_breakpoint): Update.
* remote-rdi.c (arm_rdi_insert_breakpoint)
(arm_rdi_remove_breakpoint): Update.
* remote-sim.c (gdbsim_insert_breakpoint)
(gdbsim_remove_breakpoint): Update.
* exec.c (ignore): Update.
* rs6000-tdep.c (rs6000_extract_return_value): Update.
* ia64-tdep.c (ia64_memory_insert_breakpoint)
(ia64_memory_remove_breakpoint): Update.
* remote-rdp.c (remote_rdp_insert_breakpoint)
(remote_rdp_remove_breakpoint): Update.
2005-05-01 19:58:55 +00:00
Mark Kettenis
fd0a2a6f0c
* inf-ttrace.c (inf_ttrace_pid_to_str): Use snprintf instead of
...
sprintf.
* target.c (normal_pid_to_str): Likewise.
* remote.c (remote_pid_to_str): Use snprint instead of sprintf.
Change capitalization of "thread". Use ptid_get_pid instead of
GETPID.
2005-03-13 22:06:10 +00:00
Daniel Jacobowitz
f90221d302
* target.c (target_read_memory_partial): Always initialize
...
ERR.
(target_write_memory_partial): Likewise.
2005-03-04 17:47:59 +00:00
Andrew Cagney
920d2a4419
2005-02-24 Andrew Cagney <cagney@gnu.org>
...
Add show_VARIABLE functions, update add_setshow call.
* varobj.c (_initialize_varobj, show_varobjdebug): Add and update.
* valprint.c (_initialize_valprint, show_print_max)
(show_stop_print_at_null, show_repeat_count_threshold)
(show_prettyprint_structs, show_unionprint)
(show_prettyprint_arrays, show_addressprint, show_input_radix)
(show_output_radix): Ditto.
* valops.c (_initialize_valops, show_overload_resolution): Ditto.
* utils.c (initialize_utils, show_chars_per_line)
(show_lines_per_page, show_demangle, show_pagination_enabled)
(show_sevenbit_strings, show_asm_demangle): Ditto
* tui/tui-win.c (_initialize_tui_win, show_tui_border_kind)
(show_tui_border_mode, show_tui_active_border_mode): Ditto.
* top.c (init_main, show_new_async_prompt)
(show_async_command_editing_p, show_write_history_p)
(show_history_size, show_history_filename, show_caution)
(show_annotation_level, init_main): Ditto.
* target.c (initialize_targets, show_targetdebug)
(show_trust_readonly): Ditto.
* symfile.c (_initialize_symfile, show_symbol_reloading)
(show_ext_args, show_download_write_size)
(show_debug_file_directory): Ditto.
* source.c (_initialize_source, show_lines_to_list): Ditto.
* solib.c (_initialize_solib, show_auto_solib_add)
(show_solib_search_path): Ditto.
* p-valprint.c (_initialize_pascal_valprint)
(show_pascal_static_field_print): Ditto.
* printcmd.c (_initialize_printcmd, show_max_symbolic_offset)
(show_print_symbol_filename): Add and update.
* parse.c (_initialize_parse, show_expressiondebug): Dito.
* observer.c (_initialize_observer, show_observer_debug): Dito.
* maint.c (_initialize_maint_cmds, show_watchdog)
(show_maintenance_profile_p): Dito.
* linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito.
* infrun.c (_initialize_infrun, show_debug_infrun)
(show_stop_on_solib_events, show_follow_fork_mode_string)
(show_scheduler_mode, show_step_stop_if_no_debug): Ditto.
* infcall.c (_initialize_infcall, show_coerce_float_to_double_p)
(show_unwind_on_signal_p): Ditto.
* gdbtypes.c (build_gdbtypes, show_opaque_type_resolution)
(_initialize_gdbtypes, show_overload_debug): Ditto.
* gdb-events.c, gdb-events.sh (_initialize_gdb_events)
(show_gdb_events_debug): Ditto.
* gdbarch.c, gdbarch.sh (show_gdbarch_debug)
(_initialize_gdbarch): Ditto.
* frame.c (_initialize_frame, show_backtrace_past_main)
(show_backtrace_past_entry, show_backtrace_limit)
(show_frame_debug): Ditto.
* exec.c (_initialize_exec, show_write_files): Ditto.
* dwarf2read.c (_initialize_dwarf2_read)
(show_dwarf2_max_cache_age): Ditto.
* demangle.c (_initialize_demangler)
(show_demangling_style_names): Ditto.
* dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto.
* cp-valprint.c (show_static_field_print)
(_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto.
* corefile.c (_initialize_core, show_gnutarget_string): Ditto.
* cli/cli-logging.c (_initialize_cli_logging)
(show_logging_overwrite, show_logging_redirect)
(show_logging_filename): Ditto.
* cli/cli-cmds.c (show_info_verbose, show_history_expansion_p)
(init_cli_cmds, show_baud_rate, show_remote_debug)
(show_remote_timeout, show_max_user_call_depth): Ditto.
* charset.c (show_host_charset_name, show_target_charset_name)
(initialize_charset): Ditto.
* breakpoint.c (show_can_use_hw_watchpoints)
(show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 13:51:36 +00:00
Andrew Cagney
85c078043b
2005-02-18 Andrew Cagney <cagney@gnu.org>
...
Use add_setshow_zinteger_cmd through out. Re-sync gdbarch.sh
and gdbarch.c.
* breakpoint.c, frame.c, gdb-events.sh, gdbarch.sh: Update.
* gdbtypes.c, infrun.c, linux-nat.c, maint.c, monitor.c: Update.
* pa64solib.c, parse.c, remote-mips.c, ser-go32.c: Update.
* serial.c, solib-frv.c, somsolib.c, target.c, top.c: Update.
* varobj.c, cli/cli-cmds.c: Update.
* gdbarch.c, gdb-events.c: Regenerate.
2005-02-18 18:58:56 +00:00
Andrew Cagney
2c5b56ce99
2005-02-17 Andrew Cagney <cagney@gnu.org>
...
* cli/cli-decode.c (add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete
fprint_setshow parameter.
* command.h (fprint_setshow_ftype): Delete.
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete
fprint_setshow parameter.
* aix-thread.c, alpha-tdep.c, arm-tdep.c, breakpoint.c: Update.
* complaints.c, cris-tdep.c, dwarf2read.c, frame.c: Update.
* hppa-tdep.c, infcall.c, m32r-rom.c, maint.c: Update.
* mips-tdep.c, nto-tdep.c, observer.c, remote-rdi.c: Update
* remote.c, target.c, cli/cli-logging.c: Update.
2005-02-17 13:49:56 +00:00
Andrew Cagney
1bedd21517
2005-02-15 Andrew Cagney <cagney@gnu.org>
...
Mark up add_com, add_info and add_prefix_cmd.
* breakpoint.c, cp-support.c, dcache.c, dwarf2read.c: Update.
* exec.c, f-valprint.c, frame.c, gcore.c, gnu-nat.c: Update.
* go32-nat.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* kod.c, language.c, linux-nat.c, m32r-rom.c, macrocmd.c: Update.
* maint.c, memattr.c, mips-tdep.c, nto-procfs.c, objc-lang.c: Update.
* ocd.c, pa64solib.c, printcmd.c, procfs.c, regcache.c: Update.
* remote-e7000.c, remote-m32r-sdi.c, remote-mips.c: Update.
* remote-sds.c, remote-sim.c, remote-st.c, remote-utils.c: Update.
* remote.c, rs6000-tdep.c, ser-go32.c, serial.c: Update.
* sh-tdep.c, solib.c, somsolib.c, source.c, stack.c: Update.
* symfile.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, typeprint.c, utils.c, valprint.c: Update.
* win32-nat.c, xcoffsolib.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
* cli/cli-logging.c, tui/tui-layout.c, tui/tui-regs.c: Update.
* tui/tui-stack.c, tui/tui-win.c: Update.
2005-02-15 15:49:28 +00:00
Andrew Cagney
7915a72c7f
2005-02-14 Andrew Cagney <cagney@gnu.org>
...
Mark up add_setshow functions, replace "PRINT:" comment prefix
with "FIXME: i18n:".
* aix-thread.c, alpha-tdep.c, arm-tdep.c, breakpoint.c: Update.
* cris-tdep.c, dwarf2read.c, frame.c, hppa-tdep.c: Update.
* infcall.c, m32r-rom.c, maint.c, mips-tdep.c: Update.
* nto-tdep.c, observer.c, remote-rdi.c, remote.c: Update.
* target.c, cli/cli-logging.c: Update.
2005-02-14 16:18:43 +00:00
Andrew Cagney
a3f171870f
2005-02-11 Andrew Cagney <cagney@gnu.org>
...
Mark up some of printf_filtered and printf_unfiltered.
* ada-lang.c, annotate.c, arch-utils.c, breakpoint.c: Update.
* corelow.c, cp-namespace.c, cp-support.c, dcache.c: Update.
* demangle.c, dsrec.c, dwarf2read.c, dwarfread.c: Update.
* event-loop.c, event-top.c, exec.c, f-valprint.c: Update.
* gdbtypes.c, inf-loop.c, inf-ptrace.c, inf-ttrace.c: Update.
* infcmd.c, inflow.c, infrun.c, inftarg.c, language.c: Update.
* linespec.c, linux-nat.c, linux-thread-db.c, maint.c: Update.
* mdebugread.c, memattr.c, monitor.c, objc-lang.c: Update.
* ocd.c, osabi.c, printcmd.c, procfs.c, regcache.c: Update.
* remote.c, solib-som.c, solib.c, somsolib.c, source.c: Update.
* stack.c, symfile.c, symmisc.c, target.c, thread.c: Update.
* top.c, utils.c, valprint.c, value.c, cli/cli-cmds.c: Update.
* cli/cli-dump.c, cli/cli-logging.c, tui/tui-hooks.c: Update.
* tui/tui-regs.c, tui/tui-win.c: Update.
2005-02-12 00:39:24 +00:00
Andrew Cagney
e2e0b3e57f
2005-02-11 Andrew Cagney <cagney@gnu.org>
...
Mark up error_no_arg, query, perror_with_name, complaint, and
internal_error.
* breakpoint.c, cp-abi.c, cp-namespace.c, cp-support.c: Update.
* cris-tdep.c, dbxread.c, dictionary.c, dsrec.c: Update.
* dummy-frame.c, dve3900-rom.c, dwarf2-frame.c, dwarf2expr.c: Update.
* dwarf2read.c, dwarfread.c, elfread.c, event-loop.c: Update.
* exceptions.c, exec.c, f-lang.c, findvar.c, fork-child.c: Update.
* frame-unwind.c, frame.c, frv-linux-tdep.c, frv-tdep.c: Update.
* gdb_assert.h, gdbarch.c, gdbtypes.c, gnu-nat.c: Update.
* go32-nat.c, hppa-tdep.c, hppabsd-nat.c, hpread.c: Update.
* i386-linux-nat.c, i386-nat.c, i386-tdep.c, i386bsd-nat.c: Update.
* i386fbsd-nat.c, inf-ptrace.c, inf-ttrace.c, infcall.c: Update.
* infcmd.c, inflow.c, infptrace.c, infrun.c, inftarg.c: Update.
* interps.c, language.c, linespec.c, linux-nat.c: Update.
* m32r-linux-nat.c, m68k-tdep.c, m68kbsd-nat.c: Update.
* m68klinux-nat.c, m88kbsd-nat.c, macroexp.c, macroscope.c: Update.
* macrotab.c, maint.c, mdebugread.c, memattr.c: Update.
* mips-linux-tdep.c, mips-tdep.c, mips64obsd-nat.c: Update.
* mipsnbsd-nat.c, mn10300-tdep.c, monitor.c, nto-procfs.c: Update.
* objc-lang.c, objfiles.c, objfiles.h, ocd.c, osabi.c: Update.
* parse.c, ppc-bdm.c, ppc-linux-nat.c, ppc-sysv-tdep.c: Update.
* ppcnbsd-nat.c, ppcobsd-nat.c, printcmd.c, procfs.c: Update.
* regcache.c, reggroups.c, remote-e7000.c, remote-mips.c: Update.
* remote-rdp.c, remote-sds.c, remote-sim.c, remote-st.c: Update.
* remote-utils.c, remote.c, rs6000-nat.c, rs6000-tdep.c: Update.
* s390-nat.c, s390-tdep.c, sentinel-frame.c, serial.c: Update.
* sh-tdep.c, sh3-rom.c, sh64-tdep.c, shnbsd-nat.c: Update.
* solib-aix5.c, solib-svr4.c, solib.c, source.c: Update.
* sparc-nat.c, stabsread.c, stack.c, symfile.c, symtab.c: Update.
* symtab.h, target.c, tracepoint.c, ui-file.c, ui-out.c: Update.
* utils.c, valops.c, valprint.c, vax-nat.c, vaxbsd-nat.c: Update.
* win32-nat.c, xcoffread.c, xstormy16-tdep.c: Update.
* cli/cli-cmds.c, cli/cli-logging.c, cli/cli-script.c: Update.
* cli/cli-setshow.c, mi/mi-cmd-break.c, mi/mi-cmds.c: Update.
* mi/mi-console.c, mi/mi-getopt.c, mi/mi-out.c: Update.
* tui/tui-file.c, tui/tui-interp.c: Update.
2005-02-11 18:13:55 +00:00
Andrew Cagney
8a3fe4f86c
2005-02-10 Andrew Cagney <cagney@gnu.org>
...
Mark up all error and warning messages.
* ada-lang.c, amd64-tdep.c, arch-utils.c, breakpoint.c: Update.
* bsd-kvm.c, bsd-uthread.c, coff-solib.h, coffread.c: Update.
* core-aout.c, core-regset.c, corefile.c, corelow.c: Update.
* cp-abi.c, cp-support.c, cp-valprint.c, cris-tdep.c: Update.
* dbxread.c, demangle.c, doublest.c, dsrec.c: Update.
* dve3900-rom.c, dwarf2expr.c, dwarf2loc.c: Update.
* dwarf2read.c, dwarfread.c, elfread.c, eval.c: Update.
* event-top.c, exec.c, expprint.c, f-lang.c: Update.
* f-typeprint.c, f-valprint.c, fbsd-nat.c, findvar.c: Update.
* frame.c, frv-linux-tdep.c, gcore.c, gdbtypes.c: Update.
* gnu-nat.c, gnu-v2-abi.c, gnu-v3-abi.c, go32-nat.c: Update.
* hpacc-abi.c, hppa-hpux-nat.c, hppa-hpux-tdep.c: Update.
* hppa-linux-nat.c, hppa-linux-tdep.c, hppa-tdep.c: Update.
* hpread.c, hpux-thread.c, i386-linux-nat.c: Update.
* i386-linux-tdep.c, i386-tdep.c, i386bsd-nat.c: Update.
* i386gnu-nat.c, i387-tdep.c, ia64-linux-nat.c: Update.
* ia64-tdep.c, inf-child.c, inf-ptrace.c, inf-ttrace.c: Update.
* infcall.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* inftarg.c, interps.c, irix5-nat.c, jv-lang.c: Update.
* kod-cisco.c, kod.c, language.c, libunwind-frame.c: Update.
* linespec.c, linux-nat.c, linux-thread-db.c, m2-lang.c: Update.
* m32r-rom.c, m68hc11-tdep.c, m68k-tdep.c: Update.
* m68klinux-nat.c, macrocmd.c, macroexp.c, main.c: Update.
* maint.c, mdebugread.c, mem-break.c, memattr.c: Update.
* mips-linux-tdep.c, mips-tdep.c, mipsread.c, monitor.c: Update.
* nlmread.c, nto-procfs.c, objc-lang.c, objfiles.c: Update.
* observer.c, ocd.c, p-lang.c, p-typeprint.c: Update.
* p-valprint.c, pa64solib.c, parse.c, ppc-linux-tdep.c: Update.
* ppcnbsd-tdep.c, printcmd.c, procfs.c, remote-e7000.c: Update.
* remote-fileio.c, remote-m32r-sdi.c, remote-rdi.c: Update.
* remote-rdp.c, remote-sim.c, remote-st.c: Update.
* remote-utils.c, remote-utils.h, remote.c: Update.
* rom68k-rom.c, rs6000-nat.c, s390-tdep.c, scm-lang.c: Update.
* ser-e7kpc.c, ser-tcp.c, ser-unix.c, sh-tdep.c: Update.
* sh3-rom.c, shnbsd-tdep.c, sol-thread.c, solib-aix5.c: Update.
* solib-frv.c, solib-irix.c, solib-osf.c, solib-pa64.c: Update.
* solib-som.c, solib-sunos.c, solib-svr4.c, solib.c: Update.
* somread.c, somsolib.c, source.c, stabsread.c: Update.
* stack.c, std-regs.c, symfile-mem.c, symfile.c: Update.
* symmisc.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, trad-frame.c, typeprint.c, utils.c: Update.
* uw-thread.c, valarith.c, valops.c, valprint.c: Update.
* value.c, varobj.c, version.in, win32-nat.c, wince.c: Update.
* xcoffread.c, xcoffsolib.c, cli/cli-cmds.c: Update.
* cli/cli-decode.c, cli/cli-dump.c, cli/cli-logging.c: Update.
* cli/cli-script.c, cli/cli-setshow.c, mi/mi-cmd-break.c: Update.
* mi/mi-cmd-disas.c, mi/mi-cmd-env.c, mi/mi-cmd-file.c: Update.
* mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-getopt.c: Update.
* mi/mi-symbol-cmds.c, tui/tui-layout.c, tui/tui-stack.c: Update.
* tui/tui-win.c: Update.
2005-02-11 04:06:14 +00:00
Andrew Cagney
335cca0d6e
2005-02-10 Andrew Cagney <cagney@gnu.org>
...
* cli/cli-decode.c (add_setshow_enum_cmd, add_setshow_cmd_full)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Replace
print string parameter with fprint_setshow function.
* command.h (fprint_setshow_ftype): Define. Update declarations.
* cli/cli-setshow.c (do_setshow_command): When fprint_setshow is
available, use that.
* cli/cli-decode.h (struct cmd_list_element): Add field
fprint_setshow.
* complaints.c (fprint_setshow_complaints): New function.
(_initialize_complaints): Pass to add_setshow_zinteger_cmd.
* hppa-tdep.c (_initialize_hppa_tdep): Replace "print" parameter
with NULL.
* mips-tdep.c (_initialize_mips_tdep): Ditto.
* m32r-rom.c (_initialize_m32r_rom): Ditto.
* cris-tdep.c (_initialize_cris_tdep): Ditto.
* arm-tdep.c (_initialize_arm_tdep): Ditto.
* remote-rdi.c (_initialize_remote_rdi): Ditto.
* alpha-tdep.c (_initialize_alpha_tdep): Ditto.
* dwarf2read.c (_initialize_dwarf2_read): Ditto.
* frame.c (_initialize_frame): Ditto.
* target.c (initialize_targets): Ditto.
* maint.c (_initialize_maint_cmds): Ditto.
* observer.c (_initialize_observer): Ditto.
* infcall.c (_initialize_infcall): Ditto.
* breakpoint.c (_initialize_breakpoint): Ditto.
* cli/cli-logging.c (_initialize_cli_logging): Ditto.
* remote.c (add_packet_config_cmd, _initialize_remote): Ditto.
2005-02-10 17:32:53 +00:00
Andrew Cagney
10e2d419a3
2005-01-27 Andrew Cagney <cagney@gnu.org>
...
* symfile-mem.c (do_target_read_memory): New function.
(symbol_file_add_from_memory): Pass do_target_read_memory to
bfd_elf_bfd_from_remote_memory.
* corefile.c (write_memory): Update, make a copy of the read-only
buffer.
* target.c (target_read_memory): Update.
(target_write_memory): Update, make a copy of the read-only
buffer.
* gdbcore.h (write_memory): Change buffer type to bfd_byte, make
const.
* target.h (target_read_memory, target_write_memory): Change
buffer type to bfd_byte; for write_memory, make it const.
2005-01-27 20:09:10 +00:00
Andrew Cagney
fa113d1a30
2005-01-18 Andrew Cagney <cagney@gnu.org>
...
* target.h (struct target_ops): Change return type of
to_insert_fork_catchpoint, to_insert_vfork_catchpoint and
to_insert_exec_catchpoint to void.
(child_insert_fork_catchpoint, child_insert_vfork_catchpoint)
(child_insert_exec_catchpoint): Change return type to void.
* target.c (update_current_target): Update.
(debug_to_insert_fork_catchpoint)
(debug_to_insert_vfork_catchpoint)
(debug_to_insert_exec_catchpoint): Update.
* inf-child.c (inf_child_insert_fork_catchpoint)
(inf_child_insert_vfork_catchpoint)
(inf_child_insert_exec_catchpoint): Update.
* breakpoint.c (insert_catchpoint): Update, do not throw an error.
* linux-nat.c (child_insert_fork_catchpoint)
(child_insert_vfork_catchpoint)
(child_insert_exec_catchpoint): Update.
* inftarg.c (child_insert_fork_catchpoint)
(child_insert_vfork_catchpoint,)
(child_insert_exec_catchpoint): Update.
2005-01-18 17:04:28 +00:00
Andrew Cagney
c8e73a318e
2004-10-08 Andrew Cagney <cagney@gnu.org>
...
* target.h (struct target_ops): Rename to_xfer_memory to
deprecated_xfer_memory.
* target.c: Update.
(deprecated_debug_xfer_memory): Rename debug_to_xfer_memory.
* wince.c: Update.
* win32-nat.c: Update.
* v850ice.c: Update.
* uw-thread.c: Update.
* thread-db.c: Update.
* sol-thread.c: Update.
* remote.c: Update.
* remote-vx.c: Update.
* remote-st.c: Update.
* remote-sim.c: Update.
* remote-sds.c: Update.
* remote-rdp.c: Update.
* remote-rdi.c: Update.
* remote-mips.c: Update.
* remote-m32r-sdi.c: Update.
* remote-e7000.c: Update.
* procfs.c: Update.
* ppc-bdm.c: Update.
* nto-procfs.c: Update.
* monitor.c: Update.
* linux-nat.c: Update.
* inftarg.c: Update.
* hpux-thread.c: Update.
* go32-nat.c: Update.
* gnu-nat.c: Update.
* exec.c: Update.
* corelow.c: Update.
* bsd-kvm.c: Update.
* aix-thread.c: Update.
2004-10-08 20:30:00 +00:00
Andrew Cagney
aa8698122b
2004-10-08 Andrew Cagney <cagney@gnu.org>
...
* target.c (debug_target): Move to near start of file.
(target_stopped_data_address_p): Re-org logic, add casts.
2004-10-08 19:51:16 +00:00
Jeff Johnston
4aa7a7f553
2004-10-08 Jeff Johnston <jjohnstn@redhat.com>
...
* target.h (to_stopped_data_address): Change prototype to
take a CORE_ADDR pointer and return an int.
* target.c (update_current_target): Change to_stopped_data_address
to match new prototype.
(debug_to_stopped_data_address): Change appropriately.
* breakpoint.c (bpstat_stop_status): Change call to
target_stopped_data_address to use new prototype.
* frv-tdep.c (frv_have_stopped_data_address): New function.
(frv_stopped_data_address): Change to new prototype and
functionality.
* ia64-linux-nat.c (ia64_stopped_data_address): Change to new
prototype and functionality.
(ia64_stopped_by_watchpoint): New function.
* i386-nat.c (i386_stopped_data_address): Change to new
prototype and functionality.
(i386_stopped_by_watchpoint): New function.
* remote.c (remote_stopped_data_address): Change to new prototype
and functionality.
* remote-m32r-sdi.c (m32r_stopped_data_address): Ditto.
* config/frv/tm-frv.h (frv_stopped_data_address): Change prototype.
(STOPPED_BY_WATCHPOINT): Change to use frv_have_stopped_data_address.
* config/i386/nm-i386.h (STOPPED_BY_WATCHPOINT): Change to use
new i386_stopped_by_watchpoint function.
(i386_stopped_by_watchpoint): New prototype.
(i386_stoppped_data_address): Change to new prototype.
* config/ia64/nm-linux.h (STOPPED_BY_WATCHPOINT): Change to use
new ia64_stopped_by_watchpoint function.
(ia64_stopped_by_watchpoint): New prototype.
(ia64_stopped_data_address): Ditto.
2004-10-08 17:30:48 +00:00
Andrew Cagney
1df84f135c
2004-10-05 Andrew Cagney <cagney@gnu.org>
...
* target.h (deprecated_child_ops): Rename child_ops.
* wince.c: Update copyright. Rename child_ops.
* win32-nat.c: Rename child_ops.
* target.c: Rename child_ops.
* rs6000-nat.c: Rename child_ops.
* linux-nat.c: Rename child_ops.
* infttrace.c: Rename child_ops.
* inftarg.c: Rename child_ops.
* infptrace.c: Rename child_ops.
* hppah-nat.c: Update copyright. Rename child_ops.
* hpux-thread.c: Update copyright. Rename child_ops.
2004-10-05 21:53:33 +00:00
Andrew Cagney
cb85a95394
2004-10-01 Andrew Cagney <cagney@gnu.org>
...
* target.c (xfer_using_stratum): Change return type to LONGEST.
On each iteration offset, readbuf and writebuf.
* inf-ptrace.c (inf_ptrace_xfer_partial): Simplify computation of
partial_length, and read/modify/write predicate, update comments.
Pass buffer.word to ptrace write.
2004-10-01 16:12:26 +00:00
Andrew Cagney
2739459855
2004-09-30 Andrew Cagney <cagney@gnu.org>
...
* target.c (target_xfer_partial): New function.
(target_read_memory_partial, target_write_memory_partial)
(default_xfer_partial, target_read_partial, target_write_partial)
(xfer_using_stratum): Use.
(debug_to_xfer_partial): Delete function.
(setup_target_debug): Do not override to_xfer_partial.
2004-09-30 20:36:27 +00:00
Andrew Cagney
0779438dba
2004-09-30 Andrew Cagney <cagney@gnu.org>
...
* inf-ptrace.c (inf_ptrace_target): Do not set to_xfer_memory.
(inf_ptrace_xfer_memory): Delete.
* target.c (target_xfer_partial_p, xfer_using_stratum): New.
(target_read_memory, target_write_memory): Use xfer_using_stratum
when target_xfer_partial_p.
(debug_target): Move to start of file.
(target_read_memory_partial, target_write_memory_partial): Use
to_xfer_partial when target_xfer_partial_p.
2004-09-30 16:18:57 +00:00
Andrew Cagney
b8eb5af093
2004-09-30 Andrew Cagney <cagney@gnu.org>
...
* target.c (target_read_string): Use target_read_memory instead of
target_xfer_memory.
2004-09-30 14:16:20 +00:00
Andrew Cagney
a182eed6e2
2004-09-29 Andrew Cagney <cagney@gnu.org>
...
* target.h (struct target_ops): Delete field to_post_wait.
(target_post_wait): Delete macro.
(child_post_wait): Delete declaration.
* target.c (update_current_target, update_current_target)
(debug_to_post_wait, setup_target_debug): Delete functions and
references.
* infttrace.c (ptrace_wait): Delete call to target_post_wait.
* inftarg.c (child_post_wait): Delete.
(init_child_ops): Do not set to_post_wait.
* infptrace.c (ptrace_wait): Delete call to target_post_wait.
* inf-ptrace.c (inf_ptrace_wait): Delete call to target_post_wait.
* inf-child.c (inf_child_post_wait): Delete.
(inf_child_target): Do not set to_post_wait.
* inf-ptrace.c (inf_ptrace_post_wait): Delete.
(inf_ptrace_target): Do not set to_post_wait.
2004-09-29 15:33:02 +00:00
Andrew Cagney
5ac10fd160
2004-09-29 Andrew Cagney <cagney@gnu.org>
...
* target.h (child_ops): Declare.
* inftarg.c (child_ops): Move from here ...
* target.c (child_ops): ... to here.
* wince.c (child_ops): Delete extern declaration.
* win32-nat.c (child_ops): Delete extern declaration.
* linux-nat.c (child_ops): Delete extern declaration.
* hpux-thread.c (child_ops): Delete extern declaration.
2004-09-29 13:54:33 +00:00
Andrew Cagney
f810308bf8
2004-09-12 Andrew Cagney <cagney@gnu.org>
...
* target.c (target_info): Delete #ifdef call to FILES_INFO_HOOK.
Index: doc/ChangeLog
2004-09-12 Andrew Cagney <cagney@gnu.org>
* gdbint.texinfo (Native Debugging): Delete description of
FILES_INFO_HOOK.
2004-09-12 15:20:49 +00:00
Nathan J. Williams
e354df0166
* target.c (target_resize_to_sections): Check
...
current_target.to_sections for an old value when updating.
2004-08-27 18:03:32 +00:00
Andrew Cagney
3acba33923
2004-08-02 Andrew Cagney <cagney@gnu.org>
...
Replace DEPRECATED_REGISTER_RAW_SIZE with register_size.
* rs6000-tdep.c (rs6000_push_dummy_call)
(rs6000_extract_return_value): Use register_size.
* xstormy16-tdep.c (xstormy16_get_saved_register)
(xstormy16_extract_return_value): Ditto.
* valops.c (value_assign): Ditto.
* v850ice.c (v850ice_fetch_registers, v850ice_store_registers):
* v850-tdep.c (v850_extract_return_value): Ditto.
* tracepoint.c (collect_symbol): Ditto.
* target.c (debug_print_register): Ditto.
* stack.c (frame_info): Ditto.
* rs6000-nat.c (ARCH64, fetch_register, store_register): Ditto.
* rom68k-rom.c (rom68k_supply_one_register): Ditto.
* remote.c (struct packet_reg, remote_wait, remote_async_wait)
(store_register_using_P): Ditto.
* remote-vxmips.c (vx_read_register, vx_write_register): Ditto.
* remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): Ditto.
* remote-mips.c (mips_wait, mips_fetch_registers): Ditto.
* remote-e7000.c (fetch_regs_from_dump, sub2_from_pc): Ditto.
* regcache.c (deprecated_read_register_bytes)
(deprecated_write_register_bytes, read_register)
(write_register): Ditto.
* ppc-linux-nat.c (fetch_altivec_register, fetch_register)
(supply_vrregset, store_altivec_register, fill_vrregset): Ditto.
* monitor.c (monitor_supply_register, monitor_fetch_register)
(monitor_store_register): Ditto.
* mn10300-tdep.c (mn10300_pop_frame_regular)
(mn10300_print_register): Ditto.
* mipsv4-nat.c (fill_fpregset): Ditto.
* mips-linux-tdep.c (supply_32bit_reg, fill_fpregset)
(mips64_fill_fpregset): Ditto.
* mi/mi-main.c (register_changed_p, get_register)
(mi_cmd_data_write_register_values): Ditto.
* lynx-nat.c (fetch_inferior_registers, store_inferior_registers):
* irix5-nat.c (fill_gregset, fetch_core_registers):
* infrun.c (write_inferior_status_register): Ditto.
* infptrace.c (fetch_register, store_register): Ditto.
* infcmd.c (default_print_registers_info): Ditto.
* ia64-linux-nat.c (COPY_REG, fill_fpregset): Ditto.
* ia64-aix-nat.c (COPY_REG, fill_gregset): Ditto.
* i386gnu-nat.c (gnu_store_registers, fill): Ditto.
* hpux-thread.c (hpux_thread_fetch_registers)
(hpux_thread_store_registers): Ditto.
* hppah-nat.c (store_inferior_registers, fetch_register):
* findvar.c (value_from_register): Ditto.
* dve3900-rom.c (fetch_bitmapped_register):
* cris-tdep.c (cris_gdbarch_init): Ditto.
* alpha-tdep.h: Ditto.
* aix-thread.c (pd_enable, fill_sprs64, fill_sprs32): Ditto.
2004-08-03 00:57:27 +00:00
Andrew Cagney
3b64bf9877
2004-07-28 Andrew Cagney <cagney@gnu.org>
...
* cli/cli-decode.c (add_setshow_zinteger_cmd)
(add_setshow_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_cmd_full): Add help_doc and
print parameters. Make string parameters constant.
* command.h: Update. Update copyright.
* remote.c (add_packet_config_cmd, _initialize_remote): Ditto.
* observer.c (_initialize_observer): Ditto.
* frame.c (_initialize_frame): Ditto.
* complaints.c (_initialize_complaints): Ditto.
* maint.c (_initialize_maint_cmds): Ditto.
* target.c (initialize_targets): Ditto.
* cli/cli-logging.c (_initialize_cli_logging): Ditto.
* infcall.c (_initialize_infcall): Ditto.
* arm-tdep.c (_initialize_arm_tdep): Ditto.
* m32r-rom.c (_initialize_m32r_rom): Ditto.
* remote-rdi.c (_initialize_remote_rdi): Ditto.
* d10v-tdep.c (_initialize_d10v_tdep): Ditto.
* mips-tdep.c (_initialize_mips_tdep): Ditto.
2004-07-28 17:26:27 +00:00
Andrew Cagney
cb1a6d5f51
2004-07-26 Andrew Cagney <cagney@gnu.org>
...
* cli/cli-decode.c (deprecated_add_show_from_set): Deprecate.
* xcoffsolib.c (_initialize_xcoffsolib): Update.
* wince.c (_initialize_wince): Update.
* win32-nat.c (_initialize_win32_nat): Update.
* varobj.c (_initialize_varobj): Update.
* valops.c (_initialize_valops): Update.
* utils.c (initialize_utils, initialize_utils): Update.
* tui/tui-win.c (_initialize_tui_win): Update.
* top.c (init_main): Update.
* symfile.c (_initialize_symfile): Update.
* source.c (_initialize_source): Update.
* somsolib.c (_initialize_som_solib): Update.
* solib.c (_initialize_solib): Update.
* solib-frv.c (_initialize_frv_solib): Update.
* serial.c (_initialize_serial): Update.
* ser-go32.c (_initialize_ser_dos, _initialize_ser_dos): Update.
* remote.c (_initialize_remote, _initialize_remote): Update.
* remote-vx.c (_initialize_vx): Update.
* remote-utils.c (_initialize_sr_support): Update.
* remote-sds.c (_initialize_remote_sds): Update.
* remote-mips.c (_initialize_remote_mips): Update.
* remote-e7000.c (_initialize_remote_e7000): Update.
* proc-api.c (_initialize_proc_api): Update.
* printcmd.c: Update.
* parse.c (_initialize_parse): Update.
* pa64solib.c (_initialize_pa64_solib): Update.
* p-valprint.c (_initialize_pascal_valprint): Update.
* monitor.c (_initialize_remote_monitors): Update.
* mips-tdep.c (_initialize_mips_tdep): Update.
* mcore-tdep.c (_initialize_mcore_tdep): Update.
* maint.c (_initialize_maint_cmds): Update.
* lin-lwp.c (_initialize_lin_lwp): Update.
* language.c (_initialize_language): Update.
* kod.c (_initialize_kod): Update.
* infrun.c (set_schedlock_func, _initialize_infrun): Update.
* i386-tdep.c (_initialize_i386_tdep): Update.
* gdbtypes.c (build_gdbtypes, _initialize_gdbtypes): Update.
* gdbarch.sh: Update.
* gdbarch.c: Re-generate.
* gdb-events.sh: Update.
* gdb-events.c: Re-generate.
* frame.c (_initialize_frame): Update.
* exec.c: Update.
* demangle.c (_initialize_demangler): Update.
* dcache.c (_initialize_dcache): Update.
* cris-tdep.c (_initialize_cris_tdep, cris_version_update): Update.
* cp-valprint.c (_initialize_cp_valprint): Update.
* corefile.c (_initialize_core): Update.
* command.h: Update.
* cli/cli-decode.h: Update.
* cli/cli-cmds.c (init_cli_cmds): Update.
* charset.c (_initialize_charset): Update.
* breakpoint.c (_initialize_breakpoint): Update.
* arm-tdep.c (_initialize_arm_tdep_initialize_arm_tdep): Update.
* alpha-tdep.c (_initialize_alpha_tdep): Update.
* aix-thread.c (_initialize_aix_thread): Update.
2004-07-26 14:53:06 +00:00
Andrew Cagney
8a1bf479ce
2004-06-09 Andrew Cagney <cagney@gnu.org>
...
* infptrace.c (child_xfer_memory) [CLEAR_INSN_CACHE]: Delete
#ifdef CLEAR_INSN_CACHE code.
* target.c (generic_mourn_inferior) [CLEAR_DEFERRED_STORES]:
Delete #ifdef CLEAR_DEFERRED_STORES code.
2004-06-09 20:09:42 +00:00
Andrew Cagney
c27cda74c7
2004-05-25 Andrew Cagney <cagney@gnu.org>
...
* target.h (struct target_ops): Add from_tty to
to_create_inferior.
(target_create_inferior, find_default_create_inferior): Update.
* infcmd.c (run_command): Update.
* wince.c (child_create_inferior): Update.
* win32-nat.c (child_create_inferior): Update.
* uw-thread.c (uw_thread_create_inferior): Update.
* thread-db.c (thread_db_create_inferior): Update.
* target.c (debug_to_create_inferior)
(find_default_create_inferior): Update.
(maybe_kill_then_create_inferior): Update.
* sol-thread.c (sol_thread_create_inferior): Update.
* remote.c (extended_remote_async_create_inferior)
(extended_remote_create_inferior): Update.
* remote-vx.c (vx_create_inferior): Update.
* remote-st.c (st2000_create_inferior): Update.
* remote-sim.c (gdbsim_create_inferior): Update.
* remote-sds.c (sds_create_inferior): Update.
* remote-rdp.c (remote_rdp_create_inferior): Update.
* remote-rdi.c (arm_rdi_create_inferior): Update.
* remote-m32r-sdi.c (m32r_create_inferior): Update.
* remote-e7000.c (e7000_create_inferior): Update.
* procfs.c (procfs_create_inferior): Update.
* ocd.c (ocd_create_inferior): Update.
* ocd.h (ocd_create_inferior): Update.
* nto-procfs.c (procfs_create_inferior): Update.
* monitor.c (monitor_create_inferior): Update.
* lin-lwp.c (lin_lwp_create_inferior): Update.
* inftarg.c (child_create_inferior): Update.
* hpux-thread.c (hpux_thread_create_inferior): Update.
* gnu-nat.c (gnu_create_inferior): Update.
2004-05-25 14:58:31 +00:00
Andrew Cagney
e6b55ae2e0
2004-05-08 Andrew Cagney <cagney@redhat.com>
...
* infrun.c (resume): Delete call to DO_DEFERRED_STORES.
* target.c (target_detach, target_disconnect): Ditto.
2004-05-08 Andrew Cagney <cagney@redhat.com>
* gdbint.texinfo (Target Architecture Definition): Delete
description of DO_DEFERRED_STORES.
2004-05-08 22:26:10 +00:00
Andrew Cagney
9a4105ab85
2004-04-21 Andrew Cagney <cagney@redhat.com>
...
* annotate.h (deprecated_annotate_starting_hook)
(deprecated_annotate_stopped_hook)
(deprecated_annotate_exited_hook)
(deprecated_annotate_signal_hook)
(deprecated_annotate_signalled_hook): Deprecate.
* tracepoint.h (deprecated_create_tracepoint_hook)
(deprecated_delete_tracepoint_hook)
(deprecated_modify_tracepoint_hook)
(deprecated_trace_find_hook)
(deprecated_trace_start_stop_hook): Deprecate.
* target.h (deprecated_target_new_objfile_hook): Deprecate.
* remote.h (deprecated_target_resume_hook)
(deprecated_target_wait_loop_hook): Deprecate.
* gdbcore.h (deprecated_exec_file_display_hook)
(deprecated_file_changed_hook): Deprecate.
* frame.h (deprecated_selected_frame_level_changed_hook): Deprecate.
* defs.h (deprecated_modify_breakpoint_hook)
(deprecated_command_loop_hook, deprecated_show_load_progress)
(deprecated_print_frame_info_listing_hook)
(deprecated_query_hook, deprecated_warning_hook)
(deprecated_flush_hook, deprecated_create_breakpoint_hook)
(deprecated_delete_breakpoint_hook)
(deprecated_interactive_hook, deprecated_registers_changed_hook)
(deprecated_readline_begin_hook, deprecated_readline_hook)
(deprecated_readline_end_hook, deprecated_register_changed_hook)
(deprecated_memory_changed_hook, deprecated_init_ui_hook)
(deprecated_context_hook, deprecated_target_wait_hook)
(deprecated_attach_hook, deprecated_detach_hook)
(deprecated_call_command_hook, deprecated_set_hook)
(deprecated_error_hook, deprecated_error_begin_hook)
(deprecated_ui_load_progress_hook): Deprecate.
* valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update.
* tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update.
* target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update.
* remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update.
* main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update.
* exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update.
* cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update.
* annotate.c, aix-thread.c: Update.
2004-04-21 23:52:21 +00:00
Daniel Jacobowitz
333dabeb90
* target.c (debug_to_xfer_memory): If targetdebug is 1, don't
...
print the whole transfer.
(initialize_targets): Update description of "set debug target".
2004-03-09 16:16:52 +00:00
Kevin Buettner
437b434f9a
* target.c (default_region_size_ok_for_hw_watchpoint): Compare
...
the region size against the size of a pointer, not the size of
a register as given by DEPRECATED_REGISTER_SIZE.
2004-01-19 16:49:35 +00:00
Andrew Cagney
c6f0559b48
2004-01-18 Andrew Cagney <cagney@redhat.com>
...
* remote-sds.c (tohex): Delete unused function. Update copyright.
* xstormy16-tdep.c (xstormy16_register_virtual_size): Ditto.
* v850-tdep.c (v850_register_virtual_size): Ditto.
* target.c (normal_target_post_startup_inferior): Ditto.
* source.c (ambiguous_line_spec): Ditto.
* remote.c (adapt_remote_get_threadinfo): Ditto.
* mi/mi-out.c (out_field_fmt): Ditto.
* mi/mi-interp.c (mi_interp_read_one_line_hook): Ditto.
(output_control_change_notification): Ditto.
* m68k-tdep.c (m68k_register_byte): Ditto.
(m68k_remote_breakpoint_from_pc): Ditto.
* ui-out.c (init_ui_out_state): Delete unused declaration.
* stabsread.c (search_value): Ditto.
* mi/mi-cmd-env.c (env_cli_command): Ditto.
* maint.c (print_section_table): Ditto.
* infrun.c (set_follow_fork_mode_command): Ditto.
2004-01-19 01:20:12 +00:00
Andrew Cagney
5269965e4c
2004-01-05 Andrew Cagney <cagney@redhat.com>
...
* target.c (unpush_target): Only close a target that is in the
target stack.
2004-01-05 22:32:23 +00:00
Andrew Cagney
cb137aa501
2003-11-23 Andrew Cagney <cagney@redhat.com>
...
* symfile.c (symbol_file_command): Replace STREQ with strcmp.
* defs.h (DEPRECATED_STREQN): Rename STREQN.
(DEPRECATED_STREQ): Rename STREQ.
* ada-exp.y, ada-lang.c, ada-lex.l, coffread.c: Update.
* config/mips/tm-irix5.h, config/mips/tm-irix6.h: Update.
* config/mips/tm-mipsv4.h, config/sparc/tm-sun4sol2.h: Update.
* dbxread.c, dwarf2read.c, dwarfread.c, environ.c: Update.
* eval.c, exec.c, f-lang.c, hppa-tdep.c, hpread.c: Update.
* jv-exp.y, language.c, m2-exp.y, mcore-rom.c: Update.
* mdebugread.c, mipsread.c, objc-exp.y, objfiles.c: Update.
* p-exp.y, p-typeprint.c, p-valprint.c, rs6000-nat.c: Update.
* source.c, sparc-tdep.c, stack.c, target.c: Update.
2003-11-23 20:41:17 +00:00
Andrew Cagney
8aa91c1e23
2003-11-10 Andrew Cagney <cagney@redhat.com>
...
* target.h (struct target_ops): Order xfer buffer parameters "read
write" not "write read".
* bfd-target.c (target_bfd_xfer_partial): Update.
* remote.c (remote_xfer_partial): Update.
* inftarg.c (child_xfer_partial): Update.
* target.c (default_xfer_partial): Update.
(target_read_partial, target_write_partial): Update.
(debug_to_xfer_partial): Update.
2003-11-10 21:20:44 +00:00