363 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Tom Tromey
|
05ea2a0510 |
Move many configure checks to common.m4
This moves many needed configure checks from gdb and gdbserver into common.m4. This helps gdbsupport, nat, and target be self-contained. The result is a bit spaghetti-ish, because gdbsupport uses another m4 file from gdb/. The resulting code is somewhat non-obvious. However, these problems already exist, so it's not really that much worse than what is already done. gdb/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Move many checks to ../gdbsupport/common.m4. gdb/gdbserver/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Remove any checks that were added to common.m4. * acinclude.m4: Include lib-ld.m4, lib-prefix.m4, and lib-link.m4. gdbsupport/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * configure, Makefile.in, aclocal.m4, common.m4, config.in: Rebuild. * common.m4 (GDB_AC_COMMON): Move many checks from gdb/configure.ac. * acinclude.m4: Include bfd.m4, ptrace.m4. Change-Id: I931eaa94065df268b30a2f1354390710df89c7f8 |
|
|
Tom Tromey
|
01027315f5 |
Move gdbsupport to the top level
This patch moves the gdbsupport directory to the top level. This is the next step in the ongoing project to move gdbserver to the top level. The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport". This patch then adds a build system to gdbsupport and wires it into the top level. Then it changes gdb to use the top-level build. gdbserver, on the other hand, is not yet changed. It still does its own build of gdbsupport. ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport. * MAINTAINERS: Add gdbsupport. * configure: Rebuild. * configure.ac (configdirs): Add gdbsupport. * gdbsupport: New directory, move from gdb/gdbsupport. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * nat/x86-linux-dregs.c: Include configh.h. * nat/linux-ptrace.c: Include configh.h. * nat/linux-btrace.c: Include configh.h. * defs.h: Include config.h, bfd.h. * configure.ac: Don't source common.host. (CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files. * configure: Rebuild. * acinclude.m4: Update path. * Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables. (CONFIG_SRC_SUBDIR): Remove gdbsupport. (INTERNAL_CFLAGS_BASE): Add INCSUPPORT. (CLIBS): Add LIBSUPPORT. (CDEPS): Likewise. (COMMON_SFILES): Remove gdbsupport files. (HFILES_NO_SRCDIR): Likewise. (stamp-version): Update path to create-version.sh. (ALLDEPFILES): Remove gdbsupport files. gdb/gdbserver/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * server.h: Include config.h. * gdbreplay.c: Include config.h. * configure: Rebuild. * configure.ac: Don't source common.host. * acinclude.m4: Update path. * Makefile.in (INCSUPPORT): New variable. (INCLUDE_CFLAGS): Add INCSUPPORT. (SFILES): Update paths. (version-generated.c): Update path to create-version.sh. (gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths. gdbsupport/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * common-defs.h: Add GDBSERVER case. Update includes. * acinclude.m4, aclocal.m4, config.in, configure, configure.ac, Makefile.am, Makefile.in, README: New files. * Moved from ../gdb/gdbsupport/ Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78 |
|
|
Tom Tromey
|
b2ceabe8f0 |
Consolidate definition of USE_WIN32API
I noticed that USE_WIN32API is defined separately by gdbserver and gdb. However, because it is used by code in gdbsupport, it should be defined by common.m4. This approach ensures that the code will continue to work when it is moved to the top level. gdb/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * gdbsupport/common.m4 (GDB_AC_COMMON): Define WIN32APILIBS and USE_WIN32API when needed. * configure.ac (USE_WIN32API): Don't define. (WIN32LIBS): Use WIN32APILIBS. * configure: Rebuild. gdb/gdbserver/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * configure.ac (LIBS): Use WIN32APILIBS. (USE_WIN32API): Don't define. * configure: Rebuild. Change-Id: I40d524d5445ebfb452b36f4d0e102f0b1e1089df |
|
Joel Brobecker
|
b811d2c292 |
Update copyright year range in all GDB files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
Christian Biesinger
|
0ad6b8ee70 |
Consistently quote variables used with "test"
This ensures that empty variables and variables with spaces are handled correctly. Code was inconsistent on whether the constant string (e.g. yes/no) should also be quoted; I tried to be consistent with surrounding code. This fixes the error Eli reported during configure with mingw (though that was not fatal). gdb/ChangeLog: 2019-12-19 Christian Biesinger <cbiesinger@google.com> * configure: Regenerate. * configure.ac: Quote variable arguments of test. * gdbsupport/common.m4: Likewise. gdb/gdbserver/ChangeLog: 2019-12-19 Christian Biesinger <cbiesinger@google.com> * configure: Regenerate. * configure.ac: Quote variable arguments of test. Change-Id: I220e78b52c7db88b9dd058eda604635b03464fac |
|
|
Christian Biesinger
|
cd850b40cc |
Use gnulib's strerror_r on MinGW
There is no need to keep mingw-strerror around; we can just always use
the code from posix-strerror. The main reason we had that code, it
seems, is to handle winsock error codes, but gnulib's version
handles those.
Unfortunately the code can't be moved into common-utils.c because
libinproctrace.so uses common-utils but not gnulib.
gdb/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Replace {posix,mingw}-strerror.c with safe-strerror.c.
* configure: Regenerate.
* configure.ac: Don't source common.host.
* gdbsupport/common.host: Remove.
* gdbsupport/mingw-strerror.c: Remove.
* gdbsupport/posix-strerror.c: Rename to...
* gdbsupport/safe-strerror.c: ...this.
gdb/gdbserver/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Add safe-strerror.c.
* configure: Regenerate.
* configure.ac: Don't source common.host.
Change-Id: I9e6d8a752fc398784201f370cafee65e0ea05474
|
|
|
Christian Biesinger
|
e48f6033b0 |
Move check for strerror_r to common.m4 where it belongs
gdb/ChangeLog: 2019-11-01 Christian Biesinger <cbiesinger@google.com> * configure: Regenerate. * configure.ac: Remove check for strerror_r. * gdbsupport/common.m4: Check for strerror_r. gdb/gdbserver/ChangeLog: 2019-11-01 Christian Biesinger <cbiesinger@google.com> * configure: Regenerate. * configure.ac: Remove check for strerror_r. Change-Id: Ibc290c3f84b1db23e998cffdbe2c1f97651d2a8d |
|
|
Christian Biesinger
|
b231e86ac9 |
Use strerror_r in safe_strerror if available
Also stores the result in a thread-local static variable and changes the return value to a const char*. This is already important because Guile creates threads and Python can create threads, but with the patch series here: https://gnutoolchain-gerrit.osci.io/r/c/binutils-gdb/+/176 GDB itself will create threads, too. gdb/ChangeLog: 2019-10-31 Christian Biesinger <cbiesinger@google.com> * configure: Regenerate. * configure.ac: Check for strerror_r. * gdbsupport/common-utils.h (safe_strerror): Change return value to const char * and document that this function is now threadsafe. * gdbsupport/posix-strerror.c (safe_strerror): Make buf thread_local and call strerror_r, if available. * utils.c (perror_string): Update. (print_sys_errmsg): Update. Change-Id: I81048fbaf148035c221c528727f7efe58ba528eb |
|
|
Christian Biesinger
|
ed2a222951 |
Load system gdbinit files from a directory
Adds a configure option --with-system-gdbinit-dir to specify a directory in which to look for gdbinit files. All files in this directory are loaded on startup (subject to -n/-nx as usual) as long as the extension matches a known and enabled scripting language (.gdb/.py/.scm). This also changes get_ext_lang_of_file to support ".gdb" files, similar to get_ext_lang_defn's handling of EXT_LANG_GDB. gdb/ChangeLog: 2019-10-29 Christian Biesinger <cbiesinger@google.com> * NEWS: Mention new --with-system-gdbinit-dir option. * config.in: Regenerate. * configure: Regenerate. * configure.ac: Add new option --with-system-gdbinit-dir. * extension.c (get_ext_lang_of_file): Return extension_language_gdb for a ".gdb" suffix. * main.c (get_init_files): Change system_gdbinit argument to a vector and return the files in SYSTEM_GDBINIT_DIR in addition to SYSTEM_GDBINIT. (captured_main_1): Update. (print_gdb_help): Update. * top.c (print_gdb_configuration): Also print the value of SYSTEM_GDBINIT_DIR. gdb/doc/ChangeLog: 2019-10-29 Christian Biesinger <cbiesinger@google.com> * Makefile.in: Also set SYSTEM_GDBINIT_DIR for the info manual generation. * gdb.texinfo (many sections): Document new --with-system-gdbinit-dir option. Change-Id: If233859ecc21bc6421d589b37cd658a3c7d030f2 |
|
|
Christian Biesinger
|
cbb5a2ea49 |
Remove python_has_threads check in configure.ac
The only use of python_has_threads has been removed in
commit
|
|
|
Christian Biesinger
|
71737c435d |
Simplify Python checks in configure.ac
The version checking code is not necessary. It is only used to define
HAVE_LIBPYTHON2_6 or HAVE_LIBPYTHON2_7, which is not used anywhere.
If a version check is desired, the PY_{MAJOR,MINOR}_VERSION macro from
the Python headers can be (and is) used, which does not require updating
configure.ac whenever a new Python version is released.
gdb/ChangeLog:
2019-10-24 Christian Biesinger <cbiesinger@google.com>
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Remove the code that uses sed to get the python
version and defines HAVE_LIBPYTHON2_6 / HAVE_LIBPYTHON2_7.
Change-Id: I07073870d9040c2bc8519882c8b3c1368edd4513
|
|
|
Tom Tromey
|
c12d372d26 |
Check for sigprocmask in common.m4
I noticed that gdbsupport uses HAVE_SIGPROCMASK, but common.m4 does not check for it. This means that gdbserver may not compile some gdbsupport code properly. This patch fixes this error. gdb/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Don't check for sigprocmask. * gdbsupport/common.m4 (GDB_AC_COMMON): Check for sigprocmask. gdb/gdbserver/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * configure, config.in: Rebuild. Change-Id: I2c0a4dd2c376507b9483b38707a242382faa8163 |
|
|
Christian Biesinger
|
ccb1ba6229 |
Use libxxhash for hashing, if present
XXHash is faster than htab_hash_string: ------------------------------------------------------------ Benchmark Time CPU Iterations ------------------------------------------------------------ BM_xxh3 11 ns 11 ns 65887249 BM_xxh32 19 ns 19 ns 36511877 BM_xxh64 16 ns 16 ns 42964585 BM_hash_string 182 ns 182 ns 3853125 BM_iterative_hash 77 ns 77 ns 9087638 Unfortunately, XXH3 is still experimental (see https://github.com/Cyan4973/xxHash#user-content-new-experimental-hash-algorithm) However, regular XXH64 is still a lot faster than htab_hash_string per my benchmark above. I used the following string for the benchmark: static constexpr char str[] = "_ZZZL13make_gdb_typeP7gdbarchP10tdesc_typeEN16gdb_type_creator19make_gdb_type_flagsEPK22tdesc_type_with_fieldsE19__PRETTY_FUNCTION__"; htab_hash_string is currently 4.35% + 7.98% (rehashing) of gdb startup when attaching to Chrome's content_shell. An additional 5.21% is spent in msymbol_hash, which does not use this hash function. Unfortunately, since it has to lowercase the string, it can't use this hash function. BM_msymbol_hash 52 ns 52 ns 13281495 It may be worth investigating if strlen+XXHash is still faster than htab_hash_string, which would make it easier to use in more places. Debian ships xxhash as libxxhash{0,-dev}. Fedora ships it as xxhash-devel. gdb/ChangeLog: 2019-10-22 Christian Biesinger <cbiesinger@google.com> * Makefile.in: Link with libxxhash. * config.in: Regenerate. * configure: Regenerate. * configure.ac: Search for libxxhash. * utils.c (fast_hash): Use xxhash if present. Change-Id: Icab218388b9f829522ed3977f04301ae6d4fc4ca |
|
|
Tom Tromey
|
a0a461e5b4 |
Fix creation of nm.h when configure is changed
My earlier patch -- commit
|
|
Tom Tromey
|
c5adaa1921 |
Fix creation of stamp-h by gdb's configure script
I happened to notice that "make" would always print:
CONFIG_HEADERS=config.h:config.in \
CONFIG_COMMANDS="default depdir" \
CONFIG_FILES= \
CONFIG_LINKS= \
/bin/sh config.status
config.status: creating config.h
config.status: config.h is unchanged
on every rebuild. This seems to have changed due to an autoconf
upgrade at some point in the past. In the autoconf gdb uses now, it
works to use AC_CONFIG_HEADERS and then create the stamp file via the
"commands" argument.
This patch also fixes up Makefile.in to use the new-style
config.status invocation. It's no longer necessary to pass the output
file names via environment variables.
gdb/ChangeLog
2019-10-17 Tom Tromey <tromey@adacore.com>
* configure: Rebuild.
* configure.ac: Use AC_CONFIG_HEADERS. Create stamp-h there, not
in AC_CONFIG_FILES invocation.
* Makefile.in (Makefile, data-directory/Makefile, stamp-h): Use
new-style config.status invocation.
gdb/gdbserver/ChangeLog
2019-10-17 Tom Tromey <tromey@adacore.com>
* configure: Rebuild.
* configure.ac: Use AC_CONFIG_HEADERS. Create stamp-h there, not
in AC_CONFIG_FILES invocation.
* Makefile.in (stamp-h, Makefile): Use new-style config.status
invocation.
Change-Id: Ia0530d1c5b9756812d29ddb8dc1062326155e61e
|
|
Sergio Durigan Junior
|
2d41fa1165 |
Move gdb-dlfcn.[ch] to gdbsupport/
I need to use 'gdb_dlopen' inside 'gdbsupport/', but it's not yet supported there. This commit moves 'gdb-dlfcn.[ch]' to 'gdbsupport/', which makes it available also on gdbserver. gdb/ChangeLog: 2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com> * configure.ac: Don't check for 'dlfcn.h' (moved to gdbsupport/common.m4). * Makefile.in (COMMON_SFILES): Move 'gdb-dlfcn.c' to 'gdbsupport/'. (HFILES_NO_SRCDIR): Likewise, for 'gdb-dlfcn.h'. * compile/compile-c-support.c: Include 'gdbsupport/gdb-dlfcn.h'. * gdbsupport/common.m4: Check for 'dlfcn.h'. * gdb-dlfcn.c: Move to... * gdbsupport/gdb-dlfcn.c: ... here. * gdb-dlfcn.h: Move to... * gdbsupport/gdb-dlfcn.h: ... here. gdb/gdbserver/ChangeLog: 2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (SFILES): Add 'gdbsupport/gdb-dlfcn.c'. (OBS): Add 'gdbsupport/gdb-dlfcn.o'. * config.in: Regenerate. * configure: Regenerate. |
|
|
Tom Tromey
|
d806ea2d0e |
Add Rust support to source highlighting
Currently, no release of GNU Source Highlight supports Rust. However, I've checked in a patch to do so there, and I plan to make a new release sometime this summer. This patch prepares gdb for that by adding support for Rust to the source highlighting code. Because Source Highlight will throw an exception if the language is unrecognized, this also changes gdb to ignore exceptions here. This will cause gdb to fall back to un-highlighted source text. This updates gdb's configure script to reject the combination of Source Highlight and -static-libstdc++. This is done because it's not possible to use -static-libstdc++ and then catch exceptions from a shared library. Tested with the current and development versions of Source Highlight. gdb/ChangeLog 2019-08-19 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Disallow the combination of -static-libstdc++ and source highlight. * source-cache.c (get_language_name): Handle rust. (source_cache::get_source_lines): Ignore highlighting exceptions. |
|
|
Tom Tromey
|
86c6b807f5 |
Require readline 7 or newer
This changes gdb to require readline 7 or newer at build time. gdb/ChangeLog 2019-08-12 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Check for readline 7. * NEWS: Mention readline 7 requirement. * README: Update. gdb/doc/ChangeLog 2019-08-12 Tom Tromey <tom@tromey.com> * gdb.texinfo (Configure Options): Document minimum version of readline. |
|
Frank Ch. Eigler
|
404f29021a |
[PR build/24886] disable glibc mcheck support
This patch drops gdb's configury support for glibc's mcheck function. It has been observed to cause false abort()s, because it is thread-unsafe yet interposes every malloc/free operation. So if any library transitively used by gdb also uses threads, then these functions can easily corrupt their own checking data. These days, gcc ASAN and valgrind provide high quality checking, and mcheck is apparently itself being slowly deprecated. So, let's stop linking to it. Attached patch drops the autoconf/Makefile machinery for both gdb and gdbserver. No testsuite-visible impact. IMHO not worth mentioning in NEWS. See also: https://sourceware.org/bugzilla/show_bug.cgi?id=9939 gdb/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * libmcheck.m4: Remove. * acinclude.m4: Don't include it. * Makefile.in: Don't distribute it. * top.c (print_gdb_configuration): Don't mention it. gdb/gdbserver/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * acinclude.m4: Don't include it. |
|
|
Tom Tromey
|
268a13a5a3 |
Rename common to gdbsupport
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport. |
|
|
Tom Tromey
|
73cc72729a |
Move gnulib to top level
This patch moves the gdb/gnulib subdirectory to the top level. It adjusts the top-level build system to build gnulib when necessary, and changes gdb to use this. However, gdbserver still builds its own copy of gnulib, just from the new source location. A small hack was needed to ensure that gnulib is only built when gdb is enabled. The Makefile only provides an ordering -- the directory must be mentioned in configdirs to actually be compiled at all. Most of the patch is just a "git mv" of gnulib, though a few minor path adjustments were needed in some files there. Tested by the buildbot. ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * MAINTAINERS: Add gnulib. * gnulib: New directory, move from gdb/gnulib. * configure.ac (host_libs): Add gnulib. * configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * gnulib: Move directory to top-level. * configure.ac: Don't configure gnulib. * configure: Rebuild. * common/common-defs.h: Use new path to gnulib. * Makefile.in (GNULIB_BUILDDIR): Now ../gnulib. (GNULIB_H): Remove. (INCGNU): Look in new gnulib location. (HFILES_NO_SRCDIR): Remove gnulib files. (SUBDIR, REQUIRED_SUBDIRS): Remove gnulib. (generated_files): Remove GNULIB_H. ($(LIBGNU), all-lib): Remove targets. (distclean): Don't mention GNULIB_BUILDDIR. ($(GNULIB_BUILDDIR)/Makefile): Remove target. gdb/gdbserver/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * configure.ac: Use new path to gnulib. * configure: Rebuild. * Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path to gnulib. gnulib/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * update-gnulib.sh: Adjust paths. * Makefile.in: Adjust paths. * configure.ac: Adjust paths. Use ACX_LARGEFILE. * configure: Rebuild. |
|
Sergei Trofimovich
|
189b8c2e10 |
gdb/configure.ac: add --enable-source-highlight
Allow disabling source-highlight dependency autodetection even it exists in the system. More details on problem of automatic dependencies: https://wiki.gentoo.org/wiki/Project:Quality_Assurance/Automagic_dependencies Noticed by Jeroen Roovers in https://bugs.gentoo.org/680238 * configure.ac: add --enable-source-highlight switch. * configure: Regenerate. * top.c (print_gdb_version): plumb --enable-source-highlight status to "show configuration". gdb/ChangeLog 2019-04-19 Sergei Trofimovich <siarheit@google.com> * configure.ac: add --enable-source-highlight switch. * configure: Regenerate. * top.c (print_gdb_version): plumb --enable-source-highlight status to "show configuration". |
|
|
Tom Tromey
|
6c28e44a35 |
Remove Python 2.4 and 2.5 support
This removes all the remainings spots I could find that work around issues in Python 2.4 and 2.5. I don't have a good way to test that Python 2.6 still works. Tested by the buildbot. gdb/ChangeLog 2019-02-27 Tom Tromey <tromey@adacore.com> * config.in, configure: Rebuild. * configure.ac (HAVE_LIBPYTHON2_4, HAVE_LIBPYTHON2_5): Never define. * python/py-value.c: Remove Python 2.4 workaround. * python/py-utils.c (gdb_pymodule_addobject): Remove Python 2.4 workaround. * python/py-type.c (convert_field, gdbpy_initialize_types): Remove Python 2.4 workaround. * python/python-internal.h: Remove Python 2.4 comment. (Py_ssize_t): Don't define. (PyVarObject_HEAD_INIT, Py_TYPE): Don't define. (gdb_Py_DECREF): Remove Python 2.4 workaround. (gdb_PyObject_GetAttrString, PyObject_GetAttrString): Remove. (gdb_PyObject_HasAttrString, PyObject_HasAttrString): Remove. * python/python.c (do_start_initialization): Remove Python 2.4 workaround. * python/py-prettyprint.c (class dummy_python_frame): Remove. (print_children): Remove Python 2.4 workaround. * python/py-inferior.c (buffer_procs): Remove Python 2.4 workaround. (CHARBUFFERPROC_NAME): Remove. * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Remove Python 2.4 workaround. gdb/testsuite/ChangeLog 2019-02-27 Tom Tromey <tromey@adacore.com> * lib/gdb.exp (skip_python_tests_prompt): Don't check for Python 2.4. * gdb.python/py-finish-breakpoint.exp: Remove Python 2.4 workaround. gdb/ChangeLog 2019-02-27 Tom Tromey <tromey@adacore.com> * config.in, configure: Rebuild. * configure.ac (HAVE_LIBPYTHON2_4, HAVE_LIBPYTHON2_5): Never define. * python/py-value.c: Remove Python 2.4 workaround. * python/py-utils.c (gdb_pymodule_addobject): Remove Python 2.4 workaround. * python/py-type.c (convert_field, gdbpy_initialize_types): Remove Python 2.4 workaround. * python/python-internal.h: Remove Python 2.4 comment. (Py_ssize_t): Don't define. (PyVarObject_HEAD_INIT, Py_TYPE): Don't define. (gdb_Py_DECREF): Remove Python 2.4 workaround. (gdb_PyObject_GetAttrString, PyObject_GetAttrString): Remove. (gdb_PyObject_HasAttrString, PyObject_HasAttrString): Remove. * python/python.c (do_start_initialization): Remove Python 2.4 workaround. * python/py-prettyprint.c (class dummy_python_frame): Remove. (print_children): Remove Python 2.4 workaround. * python/py-inferior.c (buffer_procs): Remove Python 2.4 workaround. (CHARBUFFERPROC_NAME): Remove. * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Remove Python 2.4 workaround. |
|
|
Joel Brobecker
|
42a4f53d2b |
Update copyright year range in all GDB files.
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files. |
|
|
Tom Tromey
|
62f29fda90 |
Highlight source code using GNU Source Highlight
This changes gdb to highlight source using GNU Source Highlight, if it is available. This affects the output of the "list" command and also the TUI source window. No new test because I didn't see a way to make it work when Source Highlight is not found. gdb/ChangeLog 2018-12-28 Tom Tromey <tom@tromey.com> * utils.h (can_emit_style_escape): Declare. * utils.c (can_emit_style_escape): No longer static. * cli/cli-style.c (set_style_enabled): New function. (_initialize_cli_style): Use it. * tui/tui-winsource.c (tui_show_source_line): Use tui_puts. (tui_alloc_source_buffer): Change how source lines are allocated. * tui/tui-source.c (copy_source_line): New function. (tui_set_source_content): Use source cache. * tui/tui-io.h (tui_puts): Update. * tui/tui-io.c (tui_puts_internal): Add window parameter. (tui_puts): Likewise. (tui_redisplay_readline): Update. * tui/tui-data.c (free_content_elements): Change how source window contents are freed. * source.c (forget_cached_source_info): Clear the source cache. (print_source_lines_base): Use the source cache. * source-cache.h: New file. * source-cache.c: New file. * configure.ac: Check for GNU Source Highlight library. * configure: Update. * config.in: Update. * Makefile.in (SRCHIGH_LIBS, SRCHIGH_CFLAGS): New variables. (INTERNAL_CFLAGS_BASE): Add SRCHIGH_CFLAGS. (CLIBS): Add SRCHIGH_LIBS. (COMMON_SFILES): Add source-cache.c. (HFILES_NO_SRCDIR): Add source-cache.h. |
|
|
Tom Tromey
|
1d1d0bf76f |
Make ANSI terminal escape sequences work in TUI
PR tui/14126 notes that ANSI terminal escape sequences don't affect the colors shown in the TUI. A simple way to see this is to try the extended-prompt example from the gdb manual. Curses does not pass escape sequences through to the terminal. Instead, it replaces non-printable characters with a visible representation, for example "^[" for the ESC character. This patch fixes the problem by adding a simple ANSI terminal sequence parser to gdb. These sequences are decoded and those that are recognized are turned into the appropriate curses calls. The curses approach to color handling is unusual and so there are some oddities in the implementation. Standard curses has no notion of the default colors of the terminal. So, if you set the foreground color, it is not possible to reset it -- you have to pick some other color. ncurses provides an extension to handle this, so this patch updates configure and uses it when available. Second, in curses, colors always come in pairs: you cannot set just the foreground. This patch handles this by tracking actually-used pairs of colors and keeping a table of these for reuse. Third, there are a limited number of such pairs available. In this patch, if you try to use too many color combinations, gdb will just ignore some color changes. Finally, in addition to limiting the number of color pairs, curses also limits the number of colors. This means that, when using extended 8- or 24-bit color sequences, it may be possible to exhaust the curses color table. I am very sour on the curses design now. I do not know how to write a test for this, so I did not. gdb/ChangeLog 2018-12-28 Tom Tromey <tom@tromey.com> PR tui/14126: * tui/tui.c (tui_enable): Call start_color and use_default_colors. * tui/tui-io.c (struct color_pair): New. (color_pair_map, last_color_pair, last_style): New globals. (tui_setup_io): Clean up color map when shutting down. (curses_colors): New constant. (get_color_pair, apply_ansi_escape): New functions. (tui_write): Rewrite. (tui_puts_internal): New function, from tui_puts. Add "height" parameter. (tui_puts): Use tui_puts_internal. (tui_redisplay_readline): Use tui_puts_internal. (_initialize_tui_io): New function. (color_map): New globals. (get_color): New function. * configure.ac: Check for use_default_colors. * config.in, configure: Rebuild. |
|
Simon Marchi
|
2578ecb1b5 |
Look for tgetent in libtinfow
On some systems where ncurses is only available in the "wide" version
(compiled with --with-widec), there might be no libtinfo.so, only a
libtinfow.so. Look for libtinfow in addition to libtinfo.
gdb/ChangeLog:
YYYY-MM-DD Simon Marchi <simon.marchi@ericsson.com>
Дилян Палаузов <dilyan.palauzov@aegee.org>
PR gdb/23950
* configure.ac: Search for tgetent in libtinfow.
* configure: Re-generate.
|
|
John Baldwin
|
2861ee4fde |
Use separate sed expressions to escape auto-load directories.
Not all sed implementations support alternation via \| in the default
regular expressions. Instead, resort to separate sed expressions via
-e for $debugdir and $datadir. This fixes the default setting of the
auto-load directories on FreeBSD. Previously on FreeBSD the sed
invocation was a no-op causing the debugdir and datadir values to be
expanded yielding an autoload path of ':${prefix}/share/gdb'.
gdb/ChangeLog:
* configure: Re-generate.
* configure.ac: Use separate sed expressions to escape variables
in auto-load directories.
|
|
|
Simon Marchi
|
e8d8cce69b |
Import mkdtemp gnulib module, fix mingw build
Building with mingw currently fails:
CXX unittests/mkdir-recursive-selftests.o
/home/emaisin/src/binutils-gdb/gdb/unittests/mkdir-recursive-selftests.c: In function ‘void selftests::mkdir_recursive::test()’:
/home/emaisin/src/binutils-gdb/gdb/unittests/mkdir-recursive-selftests.c:49:20: error: ‘mkdtemp’ was not declared in this scope
if (mkdtemp (base) == NULL)
^
Commit
|
|
|
Simon Marchi
|
7f53228719 |
Revert "GDB: Only build for "unix:" connections if AF_LOCAL is supported."
This reverts commit
|
|
John Darrington
|
98a17ece01 |
GDB: Only build for "unix:" connections if AF_LOCAL is supported.
Commit
|
|
|
Sergio Durigan Junior
|
8ecfd7bd4a |
Add parameter to allow enabling/disabling selftests via configure
This is a follow-up of: https://sourceware.org/ml/gdb-patches/2018-08/msg00347.html Instead of going throttle and always enabling our selftests (even in non-development builds), this patch is a bit more conservative and introduces a configure option ("--enable-unit-tests") that allows the user to choose whether she wants unit tests in the build or not. Note that the current behaviour is retained: if no option is provided, GDB will have selftests included in a development build, and will *not* have selftests included in a non-development build. The rationale for having this option is still the same: due to the many racy testcases and random failures we see when running the GDB testsuite, it is unfortunately not possible to perform a full test when one is building a downstream package. As the Fedora GDB maintainer and one of the Debian GDB uploaders, I feel like this situation could be improved by, at least, executing our selftests after the package has been built. This patch introduces no regressions to our build. OK? gdb/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simark@simark.ca> * README (`configure' options): Add documentation for new "--enable-unit-tests" option. * acinclude.m4: Include "selftest.m4". * configure: Regenerate. * configure.ac: Use "GDB_AC_SELFTEST". * maint.c (maintenance_selftest): Update message informing that selftests have been disabled. (maintenance_info_selftests): Likewise. * selftest.m4: New file. gdb/gdbserver/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simark@simark.ca> * acinclude.m4: Include "../selftest.m4". * configure: Regenerate. * configure.ac: Use "GDB_AC_SELFTEST". * configure.srv: Use "$enable_unittests" instead of "$development" when checking whether unit tests have been enabled. * server.c (captured_main): Update message informing that selftests have been disabled. gdb/testsuite/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.gdb/unittest.exp: Update expected message informing that selftests have been disabled. * gdb.server/unittest.exp: Likewise. squash! Add parameter to allow enabling/disabling selftests via configure |
|
|
Tom Tromey
|
f35d5adea1 |
Add --enable-ubsan
This adds --enable-ubsan to gdb's configure. By default it is enabled in development mode, and disabled otherwise. This passes both -fsanitize=undefined and -fno-sanitize-recover=undefined to compilations, so that undefined behavior violations will be sure to cause test failures. gdb/ChangeLog 2018-10-03 Tom Tromey <tom@tromey.com> * README: Mention --enable-ubsan. * NEWS: Mention --enable-ubsan. * acinclude.m4: Include sanitize.m4. * configure: Rebuild. * configure.ac: Call AM_GDB_UBSAN. * sanitize.m4: New file. gdb/doc/ChangeLog 2018-10-03 Tom Tromey <tom@tromey.com> * gdb.texinfo (Configure Options): Document --enable-ubsan. |
|
|
John Darrington
|
c1168a2f66 |
Allow remote debugging over a Unix local domain socket.
Extend the "target remote" and "target extended-remote" commands such that if the filename provided is a Unix local domain (AF_UNIX) socket, then it'll be treated as such, instead of trying to open it as if it were a character device. gdb/ChangeLog: * NEWS: Mention changed commands. * ser-uds.c: New file. * configure.ac (SER_HARDWIRE): Add ser-uds.o. * configure: Regenerate. * Makefile.in: Add new file. * serial.c (serial_open): Check if filename is a socket and lookup the appropriate interface accordingly. gdb/doc/ChangeLog: * gdb.texinfo (Remote Connection Commands): Describe the changes to target remote and target extended-remote relating to Unix domain sockets. |
|
Gary Benson
|
12b164e9a9 |
Remove ancient workaround
This commit removes a workaround for a bug in glibc 2.1.3, which was released 2000-02-24 and superseded 2000-11-09. gdb/ChangeLog: * gdb_proc_service.h (gdb_prfpregset_t): Remove typedef. * proc-service.c (ps_lgetfpregs, ps_lsetfpregs): Use prfpregset_t instead of gdb_prfpregset_t. * configure.ac (PRFPREGSET_T_BROKEN): Remove check. * configure, config.in: Rebuild. |
|
|
Gary Benson
|
43b7e92b0c |
Add workaround from gdbserver's gdb_proc_service.h to GDB
This commit adds a workaround from gdbserver's gdb_proc_service.h to GDB's. It doesn't seem to have been needed on any glibc as far back as 2001, but it's possibly required for other C libraries so I've retained it. gdb/ChangeLog: * configure.ac: Check if sys/procfs.h defines elf_fpregset_t. (AC_CHECK_HEADERS): Check for linux/elf.h. * configure, config.in: Rebuild. * gdb_proc_service.h: Include linux/elf.h if sys/procfs.h doesn't define elf_fpregset_t. |
|
|
Tom Tromey
|
ae292b3afc |
Do not pass -DNDEBUG to Python compilations in development mode
The Python CFLAGS include -DNDEBUG. This was apparently done intentionally -- setting the flags is done manually because, according to a comment, python-config passes too many things to the compiler (which is true). Per PR python/20445, this patch changes configure so that -DNDEBUG is only used by release builds. This probably doesn't have very much effect in practice, but I did see that some Python headers use assert, so perhaps it will give some safety. Tested by rebuilding and re-running gdb.python/*.exp on x86-64 Fedora 28. gdb/ChangeLog 2018-09-17 Tom Tromey <tom@tromey.com> PR python/20445: * configure: Rebuild. * configure.ac: Conditionally use -DNDEBUG for Python. |
|
|
Tom Tromey
|
da658607ed |
Check for gmp when checking for mpfr
There was a report on irc that the gdb check for mpfr failed when only static libraries are available. The issue is that mpfr depends on gmp, but this is not handled explicitly by gdb. Ideally upstream would switch to pkg-config. Or even more ideally, we would incorporate pkg-config into the compiler and not mess with any of this. Meanwhile, this changes gdb's configure to add gmp to the link line when checking for mpfr. gdb/ChangeLog 2018-09-17 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Use gmp as a library dependency when checking for mpfr. |
|
|
Tom Tromey
|
d53d543682 |
Remove --enable-multi-ice
gdb's configure script accepts --enable-multi-ice, but the code this refers to is long gone. This patch removes the option entirely. gdb/ChangeLog 2018-09-04 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Remove multi-ice code. |
|
|
Tom Tromey
|
29d17e4773 |
Remove some unnecessary declarations and configury
configure checks for declarations of free, malloc, and realloc; but the results are only used in a single spot: utils.c. I think these checks are long since obsolete, so this patch removes them. Grepping the entire tree for these HAVE_DECL_ symbols, the only uses of possible interest to gdb come from bfd/sysdep.h; but this is not (nor should be) included by gdb. (And furthermore I think the code there is probably also obsolete.) gdb/ChangeLog 2018-07-24 Tom Tromey <tom@tromey.com> * utils.c (malloc, realloc, free): Don't declare. * configure, config.in: Rebuild. * configure.ac: Don't check for declarations of free, malloc, or realloc. |
|
|
Tom Tromey
|
056dec39ed |
Remove --disable-gdbcli
I think it doesn't really make sense to allow building gdb without the CLI. Perhaps at one time this was a goal, but libgdb is long gone and the CLI is intrinsic to gdb. So, this patch removes the implementation of this configure option. It is still recognized (this is autoconf's default), but does nothing. This simplifies configure.ac and Makefile.in a bit. Tested by rebuilding. gdb/ChangeLog 2018-07-17 Tom Tromey <tom@tromey.com> * configure.ac: Remove --disable-gdbcli. * configure: Rebuild. * Makefile.in (SUBDIR_CLI_DEPS, SUBDIR_CLI_LDFLAGS) (SUBDIR_CLI_CFLAGS): Remove. (SFILES): Use SUBDIR_CLI_SRCS. (COMMON_OBS): Use SUBDIR_CLI_OBS. |
|
|
Tom Tromey
|
44cee4fdf4 |
Add --enable-codesign to gdb's configure
macOS requires that the gdb executable be signed in order to be able to successfully use ptrace. This must be done after each link. This patch adds a new --enable-codesign configure option so that this step can be automated. gdb/ChangeLog 2018-06-28 Tom Tromey <tom@tromey.com> * NEWS: Mention --enable-codesign. * silent-rules.mk (ECHO_SIGN): New variable. * configure.ac: Add --enable-codesign. * configure: Rebuild. * Makefile.in (CODESIGN, CODESIGN_CERT): New variables. (gdb$(EXEEXT)): Optionally invoke codesign. |
|
|
Simon Marchi
|
141ec9f67f |
Copy gdb-gdb.py to build dir
I have thought for a long time how nice it would be to have cool pretty
printers for GDB's internal types. Well, turns out there are few
already in gdb-gdb.py! Unfortunately, if you build GDB outside of the
source directory, that file never gets loaded. top-gdb will look for a
file called
../path/to/build/gdb/gdb-gdb.py
but that file is in the source directory at
../path/to/src/gdb/gdb-gdb.py
This patch makes it so we copy it to the build directory, just like we
do for gdb-gdb.gdb. With this, I can at least see the file getting
automatically loaded:
(top-gdb) info pretty-printer
global pretty-printers:
builtin
mpx_bound128
objfile /home/emaisin/build/binutils-gdb/gdb/gdb pretty-printers:
type_lookup_function
I noticed that running "make" didn't re-generate gdb-gdb.py from
gdb-gdb.py.in. That's because it's copied when running the configure
script and that's it. I added a rule in the Makefile for that (and for
gdb-gdb.gdb too) and added them as a dependency to the "all" target.
gdb/ChangeLog:
* gdb-gdb.py: Move to...
* gdb-gdb.py.in: ... here.
* configure.ac (AC_CONFIG_FILES): Add gdb-gdb.py.
* Makefile.in (all): Add gdb-gdb.gdb and gdb-gdb.py as
dependencies.
(distclean): Remove gdb-gdb.py when cleaning.
(gdb-gdb.py, gdb-gdb.gdb): New rules.
* configure: Re-generate.
|
|
|
Simon Marchi
|
d0ac1c4488 |
Bump to autoconf 2.69 and automake 1.15.1
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
|
|
Paul Pluzhnikov
|
bf27f0e2c7 |
configure uses incorrect link order when testing libpython
References: https://stackoverflow.com/a/49868387 https://sourceware.org/bugzilla/show_bug.cgi?id=11420 Configure uses "gcc -o conftest -g ... conftest.c -ldl -lncurses -lm -ldl ... -lpthread ... -lpython2.7" when deciding whether give libpython is usable. That of course is the wrong link order, and only works for shared libraries (mostly by accident), and only on some systems. gdb/ChangeLog: PR gdb/11420 * configure.ac: Prepend libpython. * python/python-config.py: Likewise. * configure: Regenerate. |
|
Alan Hayward
|
b5884fa710 |
Add common/ dir in build directories
gdb/ * Makefile.in: (COMMON_SFILES): Add common/*.c files. (SFILES): Remove common/*.c files. (COMMON_OBS): Remove some *.o files built from common/*.c files. * common/common.host: Add common reference. * configure.ac: Likewise. * configure: Regenerate. gdbserver/ * Makefile.in: Add common directory in build. * configure.ac: Add common reference. * configure: Regenerate. |
|
Pedro Alves
|
e671cd59d7 |
Per-inferior target_terminal state, fix PR gdb/13211, more
In my multi-target branch I ran into problems with GDB's terminal
handling that exist in master as well, with multi-inferior debugging.
This patch adds a testcase for said problems
(gdb.multi/multi-term-settings.exp), fixes the problems, fixes PR
gdb/13211 as well (and adds a testcase for that too,
gdb.base/interrupt-daemon.exp).
The basis of the problem I ran into is the following. Consider a
scenario where you have:
- inferior 1 - started with "attach", process is running on some
other terminal.
- inferior 2 - started with "run", process is sharing gdb's terminal.
In this scenario, when you stop/resume both inferiors, you want GDB to
save/restore the terminal settings of inferior 2, the one that is
sharing GDB's terminal. I.e., you want inferior 2 to "own" the
terminal (in target_terminal::is_ours/target_terminal::is_inferior
sense).
Unfortunately, that's not what you get currently. Because GDB doesn't
know whether an attached inferior is actually sharing GDB's terminal,
it tries to save/restore its settings anyway, ignoring errors. In
this case, this is pointless, because inferior 1 is running on a
different terminal, but GDB doesn't know better.
And then, because it is only possible to have the terminal settings of
a single inferior be in effect at a time, or make one inferior/pgrp be
the terminal's foreground pgrp (aka, only one inferior can "own" the
terminal, ignoring fork children here), if GDB happens to try to
restore the terminal settings of inferior 1 first, then GDB never
restores the terminal settings of inferior 2.
This patch fixes that and a few things more along the way:
- Moves enum target_terminal::terminal_state out of the
target_terminal class (it's currently private) and makes it a
scoped enum so that it can be easily used elsewhere.
- Replaces the inflow.c:terminal_is_ours boolean with a
target_terminal_state variable. This allows distinguishing is_ours
and is_ours_for_output states. This allows finally making
child_terminal_ours_1 do something with its "output_only"
parameter.
- Makes each inferior have its own copy of the
is_ours/is_ours_for_output/is_inferior state.
- Adds a way for GDB to tell whether the inferior is sharing GDB's
terminal. Works best on Linux and Solaris; the fallback works just
as well as currently.
- With that, we can remove the inf->attach_flag tests from
child_terminal_inferior/child_terminal_ours.
- Currently target_ops.to_ours is responsible for both saving the
current inferior's terminal state, and restoring gdb's state.
Because each inferior has its own terminal state (possibly handled
by different targets in a multi-target world, even), we need to
split the inferior-saving part from the gdb-restoring part. The
patch adds a new target_ops.to_save_inferior target method for
that.
- Adds a new target_terminal::save_inferior() function, so that
sequences like:
scoped_restore_terminal_state save_state;
target_terminal::ours_for_output ();
... restore back inferiors that were
target_terminal_state::is_inferior before back to is_inferior, and
leaves inferiors that were is_ours alone.
- Along the way, this adds a default implementation of
target_pass_ctrlc to inflow.c (for inf-child.c), that handles
passing the Ctrl-C to a process running on GDB's terminal or to
some other process otherwise.
- Similarly, adds a new target default implementation of
target_interrupt, for the "interrupt" command. The current
implementation of this hook in inf-ptrace.c kills the whole process
group, but that's incorrect/undesirable because we may not be
attached to all processes in the process group. And also, it's
incorrect because inferior_process_group() doesn't really return
the inferior's real process group id if the inferior is not a
process group leader... This is the cause of PR gdb/13211 [1],
which this patch fixes. While at it, that target method's "ptid"
parameter is eliminated, because it's not really used.
- A new test is included that exercises and fixes PR gdb/13211, and
also fixes a GDB issue reported on stackoverflow that I ran into
while working on this [2]. The problem is similar to PR gdb/13211,
except that it also triggers with Ctrl-C. When debugging a daemon
(i.e., a process that disconnects from the controlling terminal and
is not a process group leader, then Ctrl-C doesn't work, you just
can't interrupt the inferior at all, resulting in a hung debug
session. The problem is that since the inferior is no longer
associated with gdb's session / controlling terminal, then trying
to put the inferior in the foreground fails. And so Ctrl-C never
reaches the inferior directly. pass_signal is only used when the
inferior is attached, but that is not the case here. This is fixed
by the new child_pass_ctrlc. Without the fix, the new
interrupt-daemon.exp testcase fails with timeout waiting for a
SIGINT that never arrives.
[1] PR gdb/13211 - Async / Process group and interrupt not working
https://sourceware.org/bugzilla/show_bug.cgi?id=13211
[2] GDB not reacting Ctrl-C when after fork() and setsid()
https://stackoverflow.com/questions/46101292/gdb-not-reacting-ctrl-c-when-after-fork-and-setsid
Note this patch does _not_ fix:
- PR gdb/14559 - The 'interrupt' command does not work if sigwait is in use
https://sourceware.org/bugzilla/show_bug.cgi?id=14559
- PR gdb/9425 - When using "sigwait" GDB doesn't trap SIGINT. Ctrl+C terminates program when should break gdb.
https://sourceware.org/bugzilla/show_bug.cgi?id=9425
The only way to fix that that I know of (without changing the kernel)
is to make GDB put inferiors in a separate session (create a
pseudo-tty master/slave pair, make the inferior run with the slave as
its terminal, and have gdb pump output/input on the master end).
gdb/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* config.in, configure: Regenerate.
* configure.ac: Check for getpgid.
* go32-nat.c (go32_pass_ctrlc): New.
(go32_target): Install it.
* inf-child.c (inf_child_target): Install
child_terminal_save_inferior, child_pass_ctrlc and
child_interrupt.
* inf-ptrace.c (inf_ptrace_interrupt): Delete.
(inf_ptrace_target): No longer install it.
* infcmd.c (interrupt_target_1): Adjust.
* inferior.h (child_terminal_save_inferior, child_pass_ctrlc)
(child_interrupt): Declare.
(inferior::terminal_state): New.
* inflow.c (struct terminal_info): Update comments.
(inferior_process_group): Delete.
(terminal_is_ours): Delete.
(gdb_tty_state): New.
(child_terminal_init): Adjust.
(is_gdb_terminal, sharing_input_terminal_1)
(sharing_input_terminal): New functions.
(child_terminal_inferior): Adjust. Use sharing_input_terminal.
Set the process's actual process group in the foreground if
possible. Handle is_ours_for_output/is_ours distinction. Don't
mark terminal as the inferior's if not sharing GDB's terminal.
Don't check attach_flag.
(child_terminal_ours_for_output, child_terminal_ours): Adjust to
pass down a target_terminal_state.
(child_terminal_save_inferior): New, factored out from ...
(child_terminal_ours_1): ... this. Handle
target_terminal_state::is_ours_for_output.
(child_interrupt, child_pass_ctrlc): New.
(inflow_inferior_exit): Clear the inferior's terminal_state.
(copy_terminal_info): Copy the inferior's terminal state.
(_initialize_inflow): Remove reference to terminal_is_ours.
* inflow.h (inferior_process_group): Delete.
* nto-procfs.c (nto_handle_sigint, procfs_interrupt): Adjust.
* procfs.c (procfs_target): Don't install procfs_interrupt.
(procfs_interrupt): Delete.
* remote.c (remote_serial_quit_handler): Adjust.
(remote_interrupt): Remove ptid parameter. Adjust.
* target-delegates.c: Regenerate.
* target.c: Include "terminal.h".
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
(target_terminal::init): Adjust.
(target_terminal::inferior): Adjust to per-inferior
terminal_state.
(target_terminal::restore_inferior, target_terminal_is_ours_kind): New.
(target_terminal::ours, target_terminal::ours_for_output): Use
target_terminal_is_ours_kind.
(target_interrupt): Remove ptid parameter. Adjust.
(default_target_pass_ctrlc): Adjust.
* target.h (target_ops::to_terminal_save_inferior): New field.
(target_ops::to_interrupt): Remove ptid_t parameter.
(target_interrupt): Remove ptid_t parameter. Update comment.
(target_pass_ctrlc): Update comment.
* target/target.h (target_terminal_state): New scoped enum,
factored out of ...
(target_terminal::terminal_state): ... here.
(target_terminal::inferior): Update comments.
(target_terminal::restore_inferior): New.
(target_terminal::is_inferior, target_terminal::is_ours)
(target_terminal::is_ours_for_output): Adjust.
(target_terminal::scoped_restore_terminal_state): Adjust to
rename, and call restore_inferior() instead of inferior().
(target_terminal::scoped_restore_terminal_state::m_state): Change
type.
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this and change type.
gdb/gdbserver/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* target.c (target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
gdb/testsuite/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* gdb.base/interrupt-daemon.c: New.
* gdb.base/interrupt-daemon.exp: New.
* gdb.multi/multi-term-settings.c: New.
* gdb.multi/multi-term-settings.exp: New.
|
|
Eldar Abusalimov
|
f517c1805a |
configure: Fix test for fs_base/gs_base in <sys/user.h>
Make <sys/types.h> be included prior to including <sys/user.h>.
glibc versions older than 2.14 use __uintNN_t types within certain
structures defined in <sys/user.h> probably assuming these types are
defined prior to including the header. This results in the following
`configure` feature test compilation error that makes it think that
`struct user_regs_struct` doesn't have `fs_base`/`gs_base` fields,
althouh it does.
configure:13617: checking for struct user_regs_struct.fs_base
configure:13617: gcc -c -g -O2 -I/linux/include conftest.c >&5
In file included from conftest.c:158:0:
/usr/include/sys/user.h:32:3: error: unknown type name '__uint16_t'
__uint16_t cwd;
^
/usr/include/sys/user.h:33:3: error: unknown type name '__uint16_t'
__uint16_t swd;
^
/usr/include/sys/user.h:34:3: error: unknown type name '__uint16_t'
__uint16_t ftw;
^
/usr/include/sys/user.h:35:3: error: unknown type name '__uint16_t'
__uint16_t fop;
^
/usr/include/sys/user.h:36:3: error: unknown type name '__uint64_t'
__uint64_t rip;
^
/usr/include/sys/user.h:37:3: error: unknown type name '__uint64_t'
__uint64_t rdp;
^
/usr/include/sys/user.h:38:3: error: unknown type name '__uint32_t'
__uint32_t mxcsr;
^
/usr/include/sys/user.h:39:3: error: unknown type name '__uint32_t'
__uint32_t mxcr_mask;
^
/usr/include/sys/user.h:40:3: error: unknown type name '__uint32_t'
__uint32_t st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */
^
/usr/include/sys/user.h:41:3: error: unknown type name '__uint32_t'
__uint32_t xmm_space[64]; /* 16*16 bytes for each XMM-reg = 256 bytes */
^
/usr/include/sys/user.h:42:3: error: unknown type name '__uint32_t'
__uint32_t padding[24];
^
configure:13617: $? = 1
configure: failed program was:
| /* confdefs.h */
...
| /* end confdefs.h. */
| #include <sys/user.h>
|
| int
| main ()
| {
| static struct user_regs_struct ac_aggr;
| if (ac_aggr.fs_base)
| return 0;
| ;
| return 0;
| }
Recent glibc versions don't use typedef'ed int types in <sys/user.h>,
thus allowing it to be included as is
(glibc commit d79a9c949c84e7f0ba33e87447c47af833e9f11a).
However there're still some distros alive that use older glibc,
for instance, RHEL/CentOS 6 package glibc 2.12.
Also affects PR gdb/21559:
../../gdb/regcache.c:1087: internal-error: void regcache_raw_supply(regcache, int, const void): Assertion `regnum >= 0 && regnum < regcache->descr->nr_raw_registers' failed.
As noted by Andrew Paprocki, who submitted the PR
(https://sourceware.org/bugzilla/show_bug.cgi?id=21559#c3):
> It should be noted that modifying `configure` to force on
> `HAVE_STRUCT_USER_REGS_STRUCT_FS_BASE` and
> `HAVE_STRUCT_USER_REGS_STRUCT_GS_BASE` fixes this issue. For some
> reason the `configure` tests for `fs_base` and `gs_base` fail
> even though `sys/user.h` on RHEL5 has the fields defined in
> `user_regs_struct`.
Note that this patch does NOT fix the root cause of PR gdb/21559,
although now that `configure` properly detects the presence of the
fields and sets HAVE_XXX accordingly, the execution takes another
path, which doesn't lead to the assertion failure in question.
gdb/ChangeLog:
2018-01-17 Eldar Abusalimov <eldar.abusalimov@jetbrains.com>
PR gdb/21559
* configure.ac: Include <sys/types.h> prior to <sys/user.h> when
checking for fs_base/gs_base fields in struct user_regs_struct.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2018-01-17 Eldar Abusalimov <eldar.abusalimov@jetbrains.com>
PR gdb/21559
* configure.ac: Include <sys/types.h> prior to <sys/user.h> when
checking for fs_base/gs_base fields in struct user_regs_struct.
* configure: Regenerate.
|
|
|
John Baldwin
|
92fce24de2 |
Support 'info proc' for native FreeBSD processes.
- Command line arguments are fetched via the kern.proc.args.<pid> sysctl. - The 'cwd' and 'exe' values are obtained from the per-process file descriptor table returned by kinfo_getfile() from libutil. - 'mappings' is implemented by walking the array of VM map entries returned by kinfo_getvmmap() from libutil. - 'status' output is generated by outputting fields from the structure returned by the kern.proc.pid.<pid> sysctl. - 'stat' is aliased to 'status'. gdb/ChangeLog: * configure.ac: Check for kinfo_getfile in libutil. * configure: Regenerate. * config.in: Regenerate. * fbsd-nat.c: Include "fbsd-tdep.h". (fbsd_fetch_cmdline): New. (fbsd_fetch_kinfo_proc): Move earlier and change to return a bool rather than calling error. (fbsd_info_proc): New. (fbsd_thread_name): Report error if fbsd_fetch_kinfo_proc fails. (fbsd_wait): Report warning if fbsd_fetch_kinfo_proc fails. (fbsd_nat_add_target): Set "to_info_proc" to "fbsd_info_proc". |
|
Yao Qi
|
1e5ded6ce6 |
Fix GDB build failure when $development is false
We don't build GDB selftests bits when $development is false. However, if we turn bfd/development.sh:$development to false, common/selftest.c is compiled which is not expected. It causes the build failure, selftest.o: In function `selftests::run_tests(char const*)': binutils-gdb/gdb/common/selftest.c:97: undefined reference to `selftests::reset()' collect2: error: ld returned 1 exit status I fix this issue by putting selftest.o selftest-arch.o into CONFIG_OBS only when $development is true. After this is fixed, there are other build failures in maint.c, this patch fixes them as well. In the release mode, the output of these commands are: (gdb) maintenance selftest Selftests are not available in a non-development build. (gdb) maintenance selftest foo Selftests are not available in a non-development build. (gdb) maintenance info selftests Selftests are not available in a non-development build. gdb: 2018-01-08 Yao Qi <yao.qi@linaro.org> Simon Marchi <simon.marchi@ericsson.com> * Makefile.in (COMMON_SFILES): Remove selftest-arch.c and common/selftest.c. (COMMON_OBS): Remove selftest.o. * configure.ac: Append selftest-arch.c and common/selftest.c to CONFIG_SRCS. Append selftest-arch.o and selftest.o to COMMON_OBS. * configure: Re-generated. * maint.c (maintenance_selftest): Wrap selftests::run_tests with GDB_SELF_TEST. (maintenance_info_selftests): Likewise. gdb/testsuite: 2018-01-08 Simon Marchi <simon.marchi@ericsson.com> * gdb.gdb/unittest.exp: Match output in non-development mode. |