Executing a gdb script that runs the inferior (from the command line
with -x), and has it hit breakpoints with breakpoint commands that
themselves run the target, is currently broken on async targets
(Linux, remote).
While we're executing a command list or a script, we force the
interpreter to be sync, which results in some functions nesting an
event loop and waiting for the target to stop, instead of returning
immediately and having the top level event loop handle the stop.
The issue with this bug is simply that bpstat_do_actions misses
checking whether the interpreter is sync. When we get here, in the
case of executing a script (or, when the interpreter is sync), the
program has already advanced to the next breakpoint, through
maybe_wait_sync_command_done. We need to process its breakpoints
immediately, just like with a sync target.
Tested on x86_64 Fedora 20.
gdb/
2015-01-14 Pedro Alves <palves@redhat.com>
PR gdb/17525
* breakpoint.c: Include "interps.h".
(bpstat_do_actions_1): Also check whether the interpreter is
async.
gdb/testsuite/
2015-01-14 Pedro Alves <palves@redhat.com>
Joel Brobecker <brobecker@adacore.com>
PR gdb/17525
* gdb.base/bp-cmds-execution-x-script.c: New file.
* gdb.base/bp-cmds-execution-x-script.exp: New file.
* gdb.base/bp-cmds-execution-x-script.gdb: New file.
Running the testsuite with a series that reimplements user-visible
all-stop behavior on top of a target running in non-stop mode revealed
problems related to event starvation avoidance.
For example, I see
gdb.threads/signal-while-stepping-over-bp-other-thread.exp failing.
What happens is that GDB core never gets to see the signal event. It
ends up processing the events for the same threads over an over,
because Linux's waitpid(-1, ...) returns that first task in the task
list that has an event, starving threads on the tail of the task list.
So I wrote a non-stop mode test originally inspired by
signal-while-stepping-over-bp-other-thread.exp, to stress this
independently of all-stop on top of non-stop. Fixing it required the
changes described below. The test will be added in a following
commit.
1) linux-nat.c has code in place that picks an event LWP at random out
of all that have had events. This is because on the kernel side,
"waitpid(-1, ...)" just walks the task list linearly looking for the
first that had an event. But, this code is currently only used in
all-stop mode. So with a multi-threaded program that has multiple
events triggering debug events in parallel, GDB ends up starving some
threads.
To make the event randomization work in non-stop mode too, the patch
makes us pull out all the already pending events on the kernel side,
with waitpid, before deciding which LWP to report to the core.
There's some code in linux_wait that takes care of leaving events
pending if they were for LWPs the caller is not interested in. The
patch moves that to linux_nat_filter_event, so that we only have one
place that leaves events pending. With that in place, conceptually,
the flow is simpler and more normalized:
#1 - walk the LWP list looking for an LWP with a pending event to report.
#2 - if no pending event, pull events out of the kernel, and store
them in the LWP structures as pending.
#3- goto #1.
2) Then, currently the event randomization code only considers SIGTRAP
(or trap-like) events. That means that if e.g., have have multiple
threads stepping in parallel that hit a breakpoint that needs stepping
over, and one gets a signal, the signal may end up never getting
processed, because GDB will always be giving priority to the SIGTRAPs.
The patch fixes this by making the randomization code consider all
kinds of pending events.
3) If multiple threads hit a breakpoint, we report one of those, and
"cancel" the others. Cancelling means decrementing the PC, and
discarding the event. If the next time the LWP is resumed the
breakpoint is still installed, the LWP should hit it again, and we'll
report the hit then. The problem I found is that this delays threads
from advancing too much, with the kernel potentially ending up
scheduling the same threads over and over, and others not advancing.
So the patch switches away from cancelling the breakpoints, and
instead remembering that the LWP had stopped for a breakpoint. If on
resume the breakpoint is still installed, we report it. If it's no
longer installed, we discard the pending event then. This is actually
how GDBserver used to handle this before d50171e4 (Teach linux
gdbserver to step-over-breakpoints), but with the difference that back
then we'd delay adjusting the PC until resuming, which made it so that
"info threads" could wrongly see threads with unadjusted PCs.
gdb/
2015-01-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (hardware_breakpoint_inserted_here_p): New
function.
* breakpoint.h (hardware_breakpoint_inserted_here_p): New
declaration.
* linux-nat.c (linux_nat_status_is_event): Move higher up in file.
(linux_resume_one_lwp): Store the thread's PC. Adjust to clear
stop_reason.
(check_stopped_by_watchpoint): New function.
(save_sigtrap): Reimplement.
(linux_nat_stopped_by_watchpoint): Adjust.
(linux_nat_lp_status_is_event): Delete.
(stop_wait_callback): Only call save_sigtrap after storing the
pending status.
(status_callback): If the thread had been stopped for a breakpoint
that has since been removed, discard the event and resume the LWP.
(count_events_callback, select_event_lwp_callback): Use
lwp_status_pending_p instead of linux_nat_lp_status_is_event.
(cancel_breakpoint): Rename to ...
(check_stopped_by_breakpoint): ... this. Record whether the LWP
stopped for a software breakpoint or hardware breakpoint.
(select_event_lwp): Only give preference to the stepping LWP in
all-stop mode. Adjust comments.
(stop_and_resume_callback): Remove references to new_pending_p.
(linux_nat_filter_event): Likewise. Leave exit events of the
leader thread pending here. Handle signal short circuiting here.
Only call save_sigtrap after storing the pending waitstatus.
(linux_nat_wait_1): Remove 'retry' label. Remove references to
new_pending. Don't handle leaving events the caller is not
interested in pending here, nor handle signal short-circuiting
here. Also give equal priority to all LWPs that have had events
in non-stop mode. If reporting a software breakpoint event,
unadjust the LWP's PC.
* linux-nat.h (enum lwp_stop_reason): New.
(struct lwp_info) <stop_pc>: New field.
(struct lwp_info) <stopped_by_watchpoint>: Delete field.
(struct lwp_info) <stop_reason>: New field.
* x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
Factor out common code, and use the more efficient
ALL_BP_LOCATIONS_AT_ADDR.
gdb/
2015-01-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (bp_location_inserted_here_p): New function,
factored out from ...
(breakpoint_inserted_here_p): ... here. Use
ALL_BP_LOCATIONS_AT_ADDR.
(software_breakpoint_inserted_here_p): Use
bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
On Linux native, if dprintfs are inserted when detaching, they are left
in the inferior which causes it to crash from a SIGTRAP. It also happens
with dprintfs on remote targets, when set disconnected-dprintf is off.
The rationale of the line modified by the patch was to leave dprintfs
inserted in order to support disconnected dprintfs. However, not all
dprintfs are persistent. Also, there's no reason other kinds of
breakpoints can't be persistent either. So this replaces the bp_dprintf
check with a check on whether the location is persistent.
bl->target_info.persist will be 1 only if disconnected-dprintf is on and
we are debugging a remote target. On native, it will always be 0,
regardless of the value of disconnected-dprintf. This makes sense, since
disconnected dprintfs are not supported by the native target.
One issue about the test is that it does not pass when using
--target_board=native-extended-gdbserver, partly due to bug 17302 [1].
One quick hack I tried for this was to add a useless "next" between the
call to getpid() and detach, which avoids the bug. There is still one
case where the test fails, and that is with:
- breakpoint always-inserted on
- dprintf-style agent
- disconnected-dprintf on
What happens is that my detach does not actually detach the process,
because some persistent commands (the disconnected dprintf) is present.
However since gdbserver is ran with --once, when gdb disconnects,
gdbserver goes down and takes with it all the processes it spawned and
that are still under its control (which includes my test process).
When the test checks if the test process is still alive, it obvisouly
fails. Investigating about that led me to ask a question on the ML [2]
about the behavior of detach.
Until the remote case is sorted out, the problematic test is marked as
KFAIL.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=17302
[2] https://sourceware.org/ml/gdb/2014-08/msg00115.html
gdb/Changelog:
PR breakpoints/17012
* breakpoint.c (remove_breakpoints_pid): Skip removing
breakpoint if it is marked as persistent.
gdb/testsuite/ChangeLog:
PR breakpoints/17012
* gdb.base/dprintf-detach.c: New file.
* gdb.base/dprintf-detach.exp: New file.
A recent change...
commit 1a853c5224
Date: Wed Nov 12 10:10:49 2014 +0000
Subject: make "permanent breakpoints" per location and disableable
... broke function calls on sparc-elf when running over QEMU. Any
function call should demonstrate the problem.
For instance, seen from the debugger:
(gdb) call pn(1234)
[Inferior 1 (Remote target) exited normally]
The program being debugged exited while in a function called from GDB.
Evaluation of the expression containing the function
And seen from QEMU:
qemu: fatal: Trap 0x02 while interrupts disabled, Error state
[register dump removed]
What happens in this case is that GDB sets the inferior function call
by not only creating the dummy frame, but also writing a breakpoint
instruction at the return address for our function call. See infcall.c:
/* Write a legitimate instruction at the point where the infcall
breakpoint is going to be inserted. While this instruction
is never going to be executed, a user investigating the
memory from GDB would see this instruction instead of random
uninitialized bytes. We chose the breakpoint instruction
as it may look as the most logical one to the user and also
valgrind 3.7.0 needs it for proper vgdb inferior calls.
If software breakpoints are unsupported for this target we
leave the user visible memory content uninitialized. */
bp_addr_as_address = bp_addr;
bp_bytes = gdbarch_breakpoint_from_pc (gdbarch, &bp_addr_as_address,
&bp_size);
if (bp_bytes != NULL)
write_memory (bp_addr_as_address, bp_bytes, bp_size);
This instruction triggers a change introduced by the commit above,
where we consider bp locations as being permanent breakpoints
if there is already a breakpoint instruction at that address:
+ if (bp_loc_is_permanent (loc))
+ {
+ loc->inserted = 1;
+ loc->permanent = 1;
+ }
As a result, when resuming the program's execution for the inferior
function call, GDB decides that it does not need to insert a breakpoint
at this address, expecting the target to just report a SIGTRAP when
trying to execute that instruction.
But unfortunately for us, at least some versions of QEMU for SPARC
just terminate the execution entirely instead of reporting a breakpoint,
thus producing the behavior reported here.
Although it appears like QEMU might be misbehaving and should therefore
be fixed (to be verified) from the user's point of view, the recent
change does introduce a regression. So this patch tries to mitigate
a bit the damage by handling such infcall breakpoints as special and
making sure that they are never considered permanent, thus restoring
the previous behavior specifically for those breakpoints.
The option of not writing the breakpoint instructions in the first
place was considered, and would probably work also. But the comment
associated to it seems to indicate that there is still reason to
keep it.
gdb/ChangeLog:
* breakpoint.c (bp_loc_is_permanent): Return 0 if LOC corresponds
to a bp_call_dummy breakpoint type.
Tested on x86_64-linux. Also testing on sparc-elf/QEMU using
AdaCore's testsuite.
This patch intends to partially fix PR breakpoints/10737, which is
about making the syscall information (for the "catch syscall" command)
be per-arch, instead of global. This is not a full fix because of the
other issues pointed by Pedro here:
<https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5>
However, I consider it a good step towards the real fix. It will also
help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>.
What this patch does, basically, is move the "syscalls_info"
struct to gdbarch. Currently, the syscall information is stored in a
global variable inside gdb/xml-syscall.c, which means that there is no
easy way to correlate this info with the current target or
architecture being used, for example. This causes strange behaviors,
because the syscall info is not re-read when the arch changes. For
example, if you put a syscall catchpoint in syscall 5 on i386 (syscall
open), and then load a x86_64 program on GDB and put the same syscall
5 there (fstat on x86_64), you will still see that GDB tells you that
it is catching "open", even though it is not. With this patch, GDB
correctly says that it will be catching fstat syscalls.
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'open' [5])
But with the patch:
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'fstat' [5])
As I said, there are still some problems on the "catch syscall"
mechanism, because (for example) the user should be able to "catch
syscall open" on i386, and then expect "open" to be caught also on
x86_64. Currently, it doesn't work. I intend to work on this later.
gdb/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* bfin-linux-tdep.c (bfin_linux_init_abi): Likewise.
* breakpoint.c (print_it_catch_syscall): Adjust call to
get_syscall_by_number to provide gdbarch.
(print_one_catch_syscall): Likewise.
(print_mention_catch_syscall): Likewise.
(print_recreate_catch_syscall): Likewise.
(catch_syscall_split_args): Adjust calls to get_syscall_by_number
and get_syscall_by_name to provide gdbarch.
(catch_syscall_completer): Adjust call to get_syscall_names to
provide gdbarch.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* gdbarch.sh: Forward declare "struct syscalls_info".
(xml_syscall_file): New variable.
(syscalls_info): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise.
* xml-syscall.c: Include gdbarch.h.
(set_xml_syscall_file_name): Accept gdbarch parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
(my_gdb_datadir): Delete global variable.
(struct syscalls_info) <my_gdb_datadir>: New variable.
(struct syscalls_info) <sysinfo>: Rename variable to
"syscalls_info".
(sysinfo): Delete global variable.
(have_initialized_sysinfo): Likewise.
(xml_syscall_file): Likewise.
(sysinfo_free_syscalls_desc): Rename to...
(syscalls_info_free_syscalls_desc): ... this.
(free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust
code to the new layout of "struct syscalls_info".
(make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to
"syscalls_info".
(syscall_create_syscall_desc): Likewise.
(syscall_start_syscall): Likewise.
(syscall_parse_xml): Likewise.
(xml_init_syscalls_info): Likewise. Drop "const" from return value.
(init_sysinfo): Rename to...
(init_syscalls_info): ...this. Add gdbarch as a parameter.
Adjust function to deal with gdbarch.
(xml_get_syscall_number): Delete parameter sysinfo. Accept
gdbarch as a parameter. Adjust code.
(xml_get_syscall_name): Likewise.
(xml_list_of_syscalls): Likewise.
(set_xml_syscall_file_name): Accept gdbarch as parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
* xml-syscall.h (set_xml_syscall_file_name): Likewise.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
gdb/testsuite/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* gdb.base/catch-syscall.exp (do_syscall_tests): Call
test_catch_syscall_multi_arch.
(test_catch_syscall_multi_arch): New function.
Currently "symtabs" in gdb are stored as a single linked list of
struct symtab that contains both symbol symtabs (the blockvectors)
and file symtabs (the linetables).
This has led to confusion, bugs, and performance issues.
This patch is conceptually very simple: split struct symtab into
two pieces: one part containing things common across the entire
compilation unit, and one part containing things specific to each
source file.
Example.
For the case of a program built out of these files:
foo.c
foo1.h
foo2.h
bar.c
foo1.h
bar.h
Today we have a single list of struct symtabs:
objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL
where "->" means the "next" pointer in struct symtab.
With this patch, that turns into:
objfile -> foo.c(cu) -> bar.c(cu) -> NULL
| |
v v
foo.c bar.c
| |
v v
foo1.h foo1.h
| |
v v
foo2.h bar.h
| |
v v
NULL NULL
where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects,
and the files foo.c, etc. are struct symtab objects.
So now, for example, when we want to iterate over all blockvectors
we can now just iterate over the compunit_symtab list.
Plus a lot of the data that was either unused or replicated for each
symtab in a compilation unit now lives in struct compunit_symtab.
E.g., the objfile pointer, the producer string, etc.
I thought of moving "language" out of struct symtab but there is
logic to try to compute the language based on previously seen files,
and I think that's best left as is for now.
With my standard monster benchmark with -readnow (which I can't actually
do, but based on my calculations), whereas today the list requires
77MB to store all the struct symtabs, it now only requires 37MB.
A modest space savings given the gigabytes needed for all the debug info,
etc. Still, it's nice. Plus, whereas today we create a copy of dirname
for each source file symtab in a compilation unit, we now only create one
for the compunit.
So this patch is basically just a data structure reorg,
I don't expect significant performance improvements from it.
Notes:
1) A followup patch can do a similar split for struct partial_symtab.
I have left that until after I get the changes I want in to
better utilize .gdb_index (it may affect how we do partial syms).
2) Another followup patch *could* rename struct symtab.
The term "symtab" is ambiguous and has been a source of confusion.
In this patch I'm leaving it alone, calling it the "historical" name
of "filetabs", which is what they are now: just the file-name + line-table.
gdb/ChangeLog:
Split struct symtab into two: struct symtab and compunit_symtab.
* amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit.
* block.c (blockvector_for_pc_sect): Change "struct symtab *" argument
to "struct compunit_symtab *". All callers updated.
(set_block_compunit_symtab): Renamed from set_block_symtab. Change
"struct symtab *" argument to "struct compunit_symtab *".
All callers updated.
(get_block_compunit_symtab): Renamed from get_block_symtab. Change
result to "struct compunit_symtab *". All callers updated.
(find_iterator_compunit_symtab): Renamed from find_iterator_symtab.
Change result to "struct compunit_symtab *". All callers updated.
* block.h (struct global_block) <compunit_symtab>: Renamed from symtab.
hange type to "struct compunit_symtab *". All uses updated.
(struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab".
Change type to "struct compunit_symtab *". All uses updated.
* buildsym.c (struct buildsym_compunit): New struct.
(subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete.
(buildsym_compunit): New static global.
(finish_block_internal): Update to fetch objfile from
buildsym_compunit.
(make_blockvector): Delete objfile argument.
(start_subfile): Rewrite to use buildsym_compunit. Don't initialize
debugformat, producer.
(start_buildsym_compunit): New function.
(free_buildsym_compunit): Renamed from free_subfiles_list.
All callers updated.
(patch_subfile_names): Rewrite to use buildsym_compunit.
(get_compunit_symtab): New function.
(get_macro_table): Delete argument comp_dir. All callers updated.
(start_symtab): Change result to "struct compunit_symtab *".
All callers updated. Create the subfile of the main source file.
(watch_main_source_file_lossage): Rewrite to use buildsym_compunit.
(reset_symtab_globals): Update.
(end_symtab_get_static_block): Update to use buildsym_compunit.
(end_symtab_without_blockvector): Rewrite.
(end_symtab_with_blockvector): Change result to
"struct compunit_symtab *". All callers updated.
Update to use buildsym_compunit. Don't set symtab->dirname,
instead set it in the compunit.
Explicitly make sure main symtab is first in its list.
Set debugformat, producer, blockvector, block_line_section, and
macrotable in the compunit.
(end_symtab_from_static_block): Change result to
"struct compunit_symtab *". All callers updated.
(end_symtab, end_expandable_symtab): Ditto.
(set_missing_symtab): Change symtab argument to
"struct compunit_symtab *". All callers updated.
(augment_type_symtab): Ditto.
(record_debugformat): Update to use buildsym_compunit.
(record_producer): Update to use buildsym_compunit.
* buildsym.h (struct subfile) <dirname>: Delete.
<producer, debugformat>: Delete.
<buildsym_compunit>: New member.
(get_compunit_symtab): Declare.
* dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed
from primary_symtab. Change type to "struct compunit_symtab *".
All uses updated.
(dwarf2_start_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dwarf_decode_macros): Delete comp_dir argument. All callers updated.
(struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
(dw2_instantiate_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dw2_find_last_source_symtab): Ditto.
(dw2_lookup_symbol): Ditto.
(recursively_find_pc_sect_compunit_symtab): Renamed from
recursively_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(dw2_find_pc_sect_compunit_symtab): Renamed from
dw2_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(get_compunit_symtab): Renamed from get_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(recursively_compute_inclusions): Change type of immediate_parent
argument to "struct compunit_symtab *". All callers updated.
(compute_compunit_symtab_includes): Renamed from
compute_symtab_includes. All callers updated. Rewrite to compute
includes of compunit_symtabs and not symtabs.
(process_full_comp_unit): Update to work with struct compunit_symtab.
(process_full_type_unit): Ditto.
(dwarf_decode_lines_1): Delete argument comp_dir. All callers updated.
(dwarf_decode_lines): Remove special case handling of main subfile.
(macro_start_file): Delete argument comp_dir. All callers updated.
(dwarf_decode_macro_bytes): Ditto.
* guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to
use struct compunit_symtab.
* i386-tdep.c (i386_skip_prologue): Fetch producer from compunit.
* jit.c (finalize_symtab): Build compunit_symtab.
* jv-lang.c (get_java_class_symtab): Change result to
"struct compunit_symtab *". All callers updated.
* macroscope.c (sal_macro_scope): Fetch macro table from compunit.
* macrotab.c (struct macro_table) <compunit_symtab>: Renamed from
comp_dir. Change type to "struct compunit_symtab *".
All uses updated.
(new_macro_table): Change comp_dir argument to cust,
"struct compunit_symtab *". All callers updated.
* maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from
nr_primary_symtabs. All uses updated.
(count_symtabs_and_blocks): Update to handle compunits.
(report_command_stats): Update output, "primary symtabs" renamed to
"compunits".
* mdebugread.c (new_symtab): Change result to
"struct compunit_symtab *". All callers updated.
(parse_procedure): Change type of search_symtab argument to
"struct compunit_symtab *". All callers updated.
* objfiles.c (objfile_relocate1): Loop over blockvectors in a
separate loop.
* objfiles.h (struct objfile) <compunit_symtabs>: Renamed from
symtabs. Change type to "struct compunit_symtab *". All uses updated.
(ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS.
All uses updated.
(ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS.
All uses updated.
(ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated.
(ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated.
* psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
* psymtab.c (psymtab_to_symtab): Change result type to
"struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab_from_partial): Renamed from
find_pc_sect_symtab_from_partial. Change result type to
"struct compunit_symtab *". All callers updated.
(lookup_symbol_aux_psymtabs): Change result type to
"struct compunit_symtab *". All callers updated.
(find_last_source_symtab_from_partial): Ditto.
* python/py-symtab.c (stpy_get_producer): Fetch producer from compunit.
* source.c (forget_cached_source_info_for_objfile): Fetch debugformat
and macro_table from compunit.
* symfile-debug.c (debug_qf_find_last_source_symtab): Change result
type to "struct compunit_symtab *". All callers updated.
(debug_qf_lookup_symbol): Ditto.
(debug_qf_find_pc_sect_compunit_symtab): Renamed from
debug_qf_find_pc_sect_symtab, change result type to
"struct compunit_symtab *". All callers updated.
* symfile.c (allocate_symtab): Delete objfile argument.
New argument cust.
(allocate_compunit_symtab): New function.
(add_compunit_symtab_to_objfile): New function.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Change result type to "struct compunit_symtab *". All uses updated.
<find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All uses updated.
* symmisc.c (print_objfile_statistics): Compute blockvector count in
separate loop.
(dump_symtab_1): Update test for primary source symtab.
(maintenance_info_symtabs): Update to handle compunit symtabs.
(maintenance_check_symtabs): Ditto.
* symtab.c (set_primary_symtab): Delete.
(compunit_primary_filetab): New function.
(compunit_language): New function.
(iterate_over_some_symtabs): Change type of arguments "first",
"after_last" to "struct compunit_symtab *". All callers updated.
Update to loop over symtabs in each compunit.
(error_in_psymtab_expansion): Rename symtab argument to cust,
and change type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_compunit_symtab): Renamed from find_pc_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_line): Only loop over symtabs within selected compunit
instead of all symtabs in the objfile.
* symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab.
<compunit_symtab> New member.
<block_line_section>: Moved to compunit_symtab.
<locations_valid>: Ditto.
<epilogue_unwind_valid>: Ditto.
<macro_table>: Ditto.
<dirname>: Ditto.
<debugformat>: Ditto.
<producer>: Ditto.
<objfile>: Ditto.
<call_site_htab>: Ditto.
<includes>: Ditto.
<user>: Ditto.
<primary>: Delete
(SYMTAB_COMPUNIT): New macro.
(SYMTAB_BLOCKVECTOR): Update definition.
(SYMTAB_OBJFILE): Update definition.
(SYMTAB_DIRNAME): Update definition.
(struct compunit_symtab): New type. Common members among all source
symtabs within a compilation unit moved here. All uses updated.
(COMPUNIT_OBJFILE): New macro.
(COMPUNIT_FILETABS): New macro.
(COMPUNIT_DEBUGFORMAT): New macro.
(COMPUNIT_PRODUCER): New macro.
(COMPUNIT_DIRNAME): New macro.
(COMPUNIT_BLOCKVECTOR): New macro.
(COMPUNIT_BLOCK_LINE_SECTION): New macro.
(COMPUNIT_LOCATIONS_VALID): New macro.
(COMPUNIT_EPILOGUE_UNWIND_VALID): New macro.
(COMPUNIT_CALL_SITE_HTAB): New macro.
(COMPUNIT_MACRO_TABLE): New macro.
(ALL_COMPUNIT_FILETABS): New macro.
(compunit_symtab_ptr): New typedef.
(DEF_VEC_P (compunit_symtab_ptr)): New vector type.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update expected output.
"permanent"-ness is currently a property of the breakpoint. But, it
should actually be an implementation detail of a _location_. Consider
this bit in infrun.c:
/* Normally, by the time we reach `resume', the breakpoints are either
removed or inserted, as appropriate. The exception is if we're sitting
at a permanent breakpoint; we need to step over it, but permanent
breakpoints can't be removed. So we have to test for it here. */
if (breakpoint_here_p (aspace, pc) == permanent_breakpoint_here)
{
if (gdbarch_skip_permanent_breakpoint_p (gdbarch))
gdbarch_skip_permanent_breakpoint (gdbarch, regcache);
else
error (_("\
The program is stopped at a permanent breakpoint, but GDB does not know\n\
how to step past a permanent breakpoint on this architecture. Try using\n\
a command like `return' or `jump' to continue execution."));
}
This will wrongly skip a non-breakpoint instruction if we have a
multiple location breakpoint where the whole breakpoint was set to
"permanent" because one of the locations happened to be permanent,
even if the one GDB is resuming from is not.
Related, because the permanent breakpoints are only marked as such in
init_breakpoint_sal, we currently miss marking momentary breakpoints
as permanent. A test added by a following patch trips on that.
Making permanent-ness be per-location, and marking locations as such
in add_location_to_breakpoint, the natural place to do this, fixes
this issue...
... and then exposes a latent issue with mark_breakpoints_out. It's
clearing the inserted flag of permanent breakpoints. This results in
assertions failing like this:
Breakpoint 1, main () at testsuite/gdb.base/callexit.c:32
32 return 0;
(gdb) call callexit()
[Inferior 1 (process 15849) exited normally]
gdb/breakpoint.c:12854: internal-error: allegedly permanent breakpoint is not actually inserted
A problem internal to GDB has been detected,
further debugging may prove unreliable.
The call dummy breakpoint, which is a momentary breakpoint, is set on
top of a manually inserted breakpoint instruction, and so is now
rightfully marked as a permanent breakpoint. See "Write a legitimate
instruction at the point where the infcall breakpoint is going to be
inserted." comment in infcall.c.
Re. make_breakpoint_permanent. That's only called by solib-pa64.c.
Permanent breakpoints were actually originally invented for HP-UX [1].
I believe that that call (the only one in the tree) is unnecessary
nowadays, given that nowadays the core breakpoints code analyzes the
instruction under the breakpoint to automatically detect whether it's
setting a breakpoint on top of a breakpoint instruction in the
program. I know close to nothing about HP-PA/HP-UX, though.
[1] https://sourceware.org/ml/gdb-patches/1999-q3/msg00245.html, and
https://sourceware.org/ml/gdb-patches/1999-q3/msg00242.html
In addition to the per-location issue, "permanent breakpoints" are
currently always displayed as enabled=='n':
(gdb) b main
Breakpoint 3 at 0x40053c: file ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S, line 29.
(gdb) info breakpoints
Num Type Disp Enb Address What
3 breakpoint keep n 0x000000000040053c ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S:29
But OTOH they're always enabled; there's no way to disable them...
In turn, this means that if one adds commands to such a breakpoint,
they're _always_ run:
(gdb) start
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.arch/i386-permbkpt
...
Temporary breakpoint 1, main () at ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S:29
29 int3
(gdb) b main
Breakpoint 2 at 0x40053c: file ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S, line 29.
(gdb) info breakpoints
Num Type Disp Enb Address What
2 breakpoint keep n 0x000000000040053c ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S:29
(gdb) commands
Type commands for breakpoint(s) 2, one per line.
End with a line saying just "end".
>echo "hello!"
>end
(gdb) disable 2
(gdb) start
The program being debugged has been started already.
Start it from the beginning? (y or n) y
Temporary breakpoint 3 at 0x40053c: file ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S, line 29.
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.arch/i386-permbkpt
Breakpoint 2, main () at ../../../src/gdb/testsuite/gdb.arch/i386-permbkpt.S:29
29 int3
"hello!"(gdb)
IMO, one should be able to disable such a breakpoint, and GDB should
then behave just like if the user hadn't created the breakpoint in the
first place (that is, report a SIGTRAP).
By making permanent-ness a property of the location, and eliminating
the bp_permanent enum enable_state state ends up fixing that as well.
No tests are added for these changes yet; they'll be added in a follow
up patch, as skipping permanent breakpoints is currently broken and
trips on an assertion in infrun.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2014-11-12 Pedro Alves <palves@redhat.com>
Mark locations as permanent, not the whole breakpoint.
* breakpoint.c (remove_breakpoint_1, remove_breakpoint): Adjust.
(mark_breakpoints_out): Don't mark permanent breakpoints as
uninserted.
(breakpoint_init_inferior): Use mark_breakpoints_out.
(breakpoint_here_p): Adjust.
(bpstat_stop_status, describe_other_breakpoints): Remove handling
of permanent breakpoints.
(make_breakpoint_permanent): Mark each location as permanent,
instead of marking the breakpoint.
(add_location_to_breakpoint): If the location is permanent, mark
it as such, and as inserted.
(init_breakpoint_sal): Don't make the breakpoint permanent here.
(bp_location_compare, update_global_location_list): Adjust.
(update_breakpoint_locations): Don't make the breakpoint permanent
here.
(disable_breakpoint, enable_breakpoint_disp): Don't skip permanent
breakpoints.
* breakpoint.h (enum enable_state) <bp_permanent>: Delete field.
(struct bp_location) <permanent>: New field.
* guile/scm-breakpoint.c (bpscm_enable_state_to_string): Remove
reference to bp_permanent.
Used to be necessary for the thread-hop code, but that's gone now.
Nothing uses this anymore.
gdb/
2014-11-04 Pedro Alves <palves@redhat.com>
* breakpoint.c (breakpoint_thread_match): Delete function.
* breakpoint.h (breakpoint_thread_match): Delete declaration.
This patch finally makes each thread have its own set of single-step
breakpoints. This paves the way to have multiple threads software
single-stepping, though this patch doesn't flip that switch on yet.
That'll be done on a subsequent patch.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (single_step_breakpoints): Delete global.
(insert_single_step_breakpoint): Adjust to store the breakpoint
pointer in the current thread.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Delete functions.
(breakpoint_has_location_inserted_here): Make extern.
(single_step_breakpoint_inserted_here_p): Adjust to walk the
breakpoint list.
* breakpoint.h (breakpoint_has_location_inserted_here): New
declaration.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Remove declarations.
* gdbthread.h (struct thread_control_state)
<single_step_breakpoints>: New field.
(delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New declarations.
* infrun.c (follow_exec): Also clear the single-step breakpoints.
(singlestep_breakpoints_inserted_p, singlestep_ptid)
(singlestep_pc): Delete globals.
(infrun_thread_ptid_changed): Remove references to removed
globals.
(resume_cleanups): Delete the current thread's single-step
breakpoints.
(maybe_software_singlestep): Remove references to removed globals.
(resume): Adjust to use thread_has_single_step_breakpoints_set and
delete_single_step_breakpoints.
(init_wait_for_inferior): Remove references to removed globals.
(delete_thread_infrun_breakpoints): Delete the thread's
single-step breakpoints too.
(delete_just_stopped_threads_infrun_breakpoints): Don't delete
single-step breakpoints here.
(delete_stopped_threads_single_step_breakpoints): New function.
(adjust_pc_after_break): Adjust to use
thread_has_single_step_breakpoints_set.
(handle_inferior_event): Remove references to removed globals.
Use delete_stopped_threads_single_step_breakpoints.
(handle_signal_stop): Adjust to per-thread single-step
breakpoints. Swap test order to do cheaper tests first.
(switch_back_to_stepped_thread): Extend debug output. Remove
references to removed globals.
* record-full.c (record_full_wait_1): Adjust to per-thread
single-step breakpoints.
* thread.c (delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New functions.
(clear_thread_inferior_resources): Also delete the thread's
single-step breakpoints.
There are no users of deprecated_{insert,remove}_raw_breakpoint left.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (regular_breakpoint_inserted_here_p): Inline ...
(breakpoint_inserted_here_p): ... here. Remove special case for
software single-step breakpoints.
(find_non_raw_software_breakpoint_inserted_here): Inline ...
(software_breakpoint_inserted_here_p): ... here. Remove special
case for software single-step breakpoints.
(bp_target_info_copy_insertion_state)
(deprecated_insert_raw_breakpoint)
(deprecated_remove_raw_breakpoint): Delete functions.
* breakpoint.h (deprecated_insert_raw_breakpoint)
(deprecated_remove_raw_breakpoint): Remove declarations.
This patch makes single-step breakpoints "real" breakpoints on the
global location list.
There are several benefits to this:
- It removes the currently limitation that only 2 single-step
breakpoints can be inserted. See an example here of a discussion
around a case that wants more than 2, possibly unbounded:
https://sourceware.org/ml/gdb-patches/2014-03/msg00663.html
- makes software single-step work on read-only code regions.
The logic to convert a software breakpoint to a hardware breakpoint
if the memory map says the breakpoint address is in read only memory
is in insert_bp_location. Because software single-step breakpoints
bypass all that go and straight to target_insert_breakpoint, we
can't software single-step over read only memory. This patch
removes that limitation, and adds a test that makes sure that works,
by forcing a code region to read-only with "mem LOW HIGH ro" and
then stepping through that.
- Fixes PR breakpoints/9649
This is an assertion failure in insert_single_step_breakpoint in
breakpoint.c, because we may leave stale single-step breakpoints
behind on error.
The tests for stepping through read-only regions exercise the root
cause of the bug, which is that we leave single-step breakpoints
behind if we fail to insert any single-step breakpoint. Deleting
the single-step breakpoints in resume_cleanups,
delete_just_stopped_threads_infrun_breakpoints, and
fetch_inferior_event fixes this. Without that, we'd no longer hit
the assertion, as that code is deleted, but we'd instead run into
errors/warnings trying to insert/remove the stale breakpoints on
next resume.
- Paves the way to have multiple threads software single-stepping at
the same time, leaving update_global_location_list to worry about
duplicate locations.
- Makes the moribund location machinery aware of software single-step
breakpoints, paving the way to enable software single-step on
non-stop, instead of forcing serialized displaced stepping for all
single steps.
- It's generaly cleaner.
We no longer have to play games with single-step breakpoints
inserted at the same address as regular breakpoints, like we
recently had to do for 7.8. See this discussion:
https://sourceware.org/ml/gdb-patches/2014-06/msg00052.html.
Tested on x86_64 Fedora 20, on top of my 'single-step breakpoints on
x86' series.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
PR breakpoints/9649
* breakpoint.c (single_step_breakpoints, single_step_gdbarch):
Delete array globals.
(single_step_breakpoints): New global.
(breakpoint_xfer_memory): Remove special handling for single-step
breakpoints.
(update_breakpoints_after_exec): Delete bp_single_step
breakpoints.
(detach_breakpoints): Remove special handling for single-step
breakpoints.
(breakpoint_init_inferior): Delete bp_single_step breakpoints.
(bpstat_stop_status): Add comment.
(bpstat_what, bptype_string, print_one_breakpoint_location)
(adjust_breakpoint_address, init_bp_location): Handle
bp_single_step.
(new_single_step_breakpoint): New function.
(set_momentary_breakpoint, bkpt_remove_location): Remove special
handling for single-step breakpoints.
(insert_single_step_breakpoint, single_step_breakpoints_inserted)
(remove_single_step_breakpoints, cancel_single_step_breakpoints):
Rewrite.
(detach_single_step_breakpoints, find_single_step_breakpoint):
Delete functions.
(breakpoint_has_location_inserted_here): New function.
(single_step_breakpoint_inserted_here_p): Rewrite.
* breakpoint.h: Remove FIXME.
(enum bptype) <bp_single_step>: New enum value.
(insert_single_step_breakpoint): Update comment.
* infrun.c (resume_cleanups)
(delete_step_thread_step_resume_breakpoint): Remove single-step
breakpoints.
(fetch_inferior_event): Install a cleanup that removes infrun
breakpoints.
(switch_back_to_stepped_thread) <expect thread advanced also>:
Clear step-over info.
gdb/testsuite/
2014-10-15 Pedro Alves <palves@redhat.com>
PR breakpoints/9649
* gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
* gdb.base/breakpoint-in-ro-region.exp
(probe_target_hardware_step): New procedure.
(top level): Probe hardware stepping and hardware breakpoint
support. Test stepping through a read-only region, with both
"breakpoint auto-hw" on and off and both "always-inserted" on and
off.
When GDB finds out the target triggered a watchpoint, and the target
has non-continuable watchpoints, GDB sets things up to step past the
instruction that triggered the watchpoint. This is just like stepping
past a breakpoint, but goes through a different mechanism - it resumes
only the thread that needs to step past the watchpoint, but also
switches a "infwait state" global, that has the effect that the next
target_wait only wait for events only from that thread.
This forcing of a ptid to pass to target_wait obviously becomes a
bottleneck if we ever support stepping past different watchpoints
simultaneously (in separate processes).
It's also unnecessary -- the target should only return events for
threads that have been resumed; if no other thread than the one we're
stepping past the watchpoint has been resumed, then those other
threads should not report events. If we couldn't assume that, then
stepping past regular breakpoints would be broken for not likewise
forcing a similar infwait_state.
So this patch eliminates infwait_state, and instead teaches keep_going
to mark step_over_info in a way that has the breakpoints module skip
inserting watchpoints (because we're stepping past one), like it skips
breakpoints when we're stepping past one.
Tested on:
- x86_64 Fedora 20 (continuable watchpoints)
- PPC64 Fedora 18 (non-steppable watchpoints)
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* breakpoint.c (should_be_inserted): Don't insert watchpoints if
trying to step past a non-steppable watchpoint.
* gdbthread.h (struct thread_info) <stepping_over_watchpoint>: New
field.
* infrun.c (struct step_over_info): Add new field
'nonsteppable_watchpoint_p' and adjust comments.
(set_step_over_info): New 'nonsteppable_watchpoint_p' parameter.
Adjust.
(clear_step_over_info): Clear nonsteppable_watchpoint_p as well.
(stepping_past_nonsteppable_watchpoint): New function.
(step_over_info_valid_p): Also return true if stepping past a
nonsteppable watchpoint.
(proceed): Adjust call to set_step_over_info. Remove reference to
init_infwait_state.
(init_wait_for_inferior): Remove reference to init_infwait_state.
(waiton_ptid): Delete global.
(struct execution_control_state)
<stepped_after_stopped_by_watchpoint>: Delete field.
(wait_for_inferior, fetch_inferior_event): Always pass
minus_one_ptid to target_wait.
(init_thread_stepping_state): Clear 'stepping_over_watchpoint'
field.
(init_infwait_state): Delete function.
(handle_inferior_event): Remove infwait_state handling.
(handle_signal_stop) <watchpoints handling>: Adjust after
stepped_after_stopped_by_watchpoint removal. Don't remove
breakpoints here nor set infwait_state. Set the thread's
stepping_over_watchpoint flag, and call keep_going instead.
(keep_going): Handle stepping_over_watchpoint. Adjust
set_step_over_info calls.
* infrun.h (stepping_past_nonsteppable_watchpoint): Declare
function.
This patch is a response to what I commented on:
<https://sourceware.org/ml/gdb-patches/2014-10/msg00046.html>
When reviewing Jose's USDT probe support patches. Basically, in his
patch he had to create dummy functions for the set_semaphore and the
clear_semaphore methods of probe_ops (gdb/probe.h), because those
functions were called inconditionally from inside gdb/breakpoint.c and
gdb/tracepoint.c. However, the semaphore concept may not apply to all
types of probes, and this is the case here: USDT probes do not have
semaphores (although SDT probes do).
Anyway, this is a simple (almost obvious) patch to guard the call to
{set,clear}_semaphore. It does not introduce any regression on a
Fedora 20 x86_64.
I will apply it in a few days in case there is no comment.
gdb/ChangeLog:
2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
* breakpoint.c (bkpt_probe_insert_location): Call set_semaphore
only if it is not NULL.
(bkpt_probe_remove_location): Likewise, for clear_semaphore.
* probe.h (struct probe_ops) <set_semaphore>: Update comment.
(struct probe_ops) <clear_semaphore>: Likewise.
* tracepoint.c (start_tracing): Call set_semaphore only if it is
not NULL.
(stop_tracing): Likewise, for clear_semaphore.
This change:
commit b775012e84
Author: Luis Machado <luisgpm@br.ibm.com>
Date: Fri Feb 24 15:10:59 2012 +0000
2012-02-24 Luis Machado <lgustavo@codesourcery.com>
* remote.c (remote_supports_cond_breakpoints): New forward
declaration.
[...]
changed the way breakpoints are inserted and removed such that
`insert_bp_location' can now be called with the breakpoint being handled
already in place, while previously the call was only ever made for
breakpoints that have not been put in place. This in turn caused an
issue for software breakpoints and targets for which a breakpoint's
`placed_address' may not be the same as the original requested address.
The issue is `insert_bp_location' overwrites the previously adjusted
value in `placed_address' with the original address, that is only
replaced back with the correct adjusted address later on when
`gdbarch_breakpoint_from_pc' is called. Meanwhile there's a window
where the value in `placed_address' does not correspond to data stored
in `shadow_contents', leading to incorrect instruction bytes being
supplied when `one_breakpoint_xfer_memory' is called to supply the
instruction overlaid by the breakpoint.
And this is exactly what happens on the MIPS target with software
breakpoints placed in microMIPS code. In this case not only
`placed_address' is not the original address because of the ISA bit, but
`mips_breakpoint_from_pc' has to read the original instruction to
determine which one of the two software breakpoint instruction encodings
to choose as well. The 16-bit encoding is used to replace 16-bit
instructions and similarly the 32-bit one is used with 32-bit
instructions, to satisfy branch delay slot size requirements.
The mismatch between `placed_address' and the address data in
`shadow_contents' has been obtained from leads to the wrong encoding
being used in some cases, which in the case of a 32-bit software
breakpoint instruction replacing a 16-bit instruction causes corruption
to the adjacent following instruction and leads the debug session astray
if execution reaches there e.g. with a jump.
To address this problem I made the change below, that adds a
`reqstd_address' field to `struct bp_target_info' and leaves
`placed_address' unchanged once it has been set. This ensures data in
`shadow_contents' is always consistent with `placed_address'.
This approach also has this good side effect that all the places that
examine the breakpoint's address see a consistent value, either
`reqstd_address' or `placed_address', as required. Currently some
places see either the original or the adjusted address in
`placed_address', depending on whether they have been called before
`gdbarch_remote_breakpoint_from_pc' or afterwards. This is in
particular true for subsequent calls to
`gdbarch_remote_breakpoint_from_pc' itself, e.g. from
`one_breakpoint_xfer_memory'. This is also important for places like
`find_single_step_breakpoint' where a breakpoint's address is compared
to the raw value of $pc.
* breakpoint.h (bp_target_info): Add `reqstd_address' member,
update comments.
* breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address'
for the breakpoint's address. Don't preinitialize `placed_size'.
(insert_bp_location): Set `reqstd_address' rather than
`placed_address'.
(bp_target_info_copy_insertion_state): Also copy `placed_address'.
(bkpt_insert_location): Use `reqstd_address' for the breakpoint's
address.
(bkpt_remove_location): Likewise.
(deprecated_insert_raw_breakpoint): Likewise.
(deprecated_remove_raw_breakpoint): Likewise.
(find_single_step_breakpoint): Likewise.
* mem-break.c (default_memory_insert_breakpoint): Use
`reqstd_address' for the breakpoint's address. Don't set
`placed_address' or `placed_size' if breakpoint contents couldn't
have been determined.
* remote.c (remote_insert_breakpoint): Use `reqstd_address' for
the breakpoint's address.
(remote_insert_hw_breakpoint): Likewise. Don't set
`placed_address' or `placed_size' if breakpoint couldn't have been
set.
* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use
`reqstd_address' for the breakpoint's address.
* arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise.
* ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise.
* m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise.
* microblaze-linux-tdep.c
(microblaze_linux_memory_remove_breakpoint): Likewise.
* monitor.c (monitor_insert_breakpoint): Likewise.
* nto-procfs.c (procfs_insert_breakpoint): Likewise.
(procfs_insert_hw_breakpoint): Likewise.
* ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
* remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise.
* remote-mips.c (mips_insert_breakpoint): Likewise.
* x86-nat.c (x86_insert_hw_breakpoint): Likewise.
Commit a25a5a45 (Fix "breakpoint always-inserted off"; remove
"breakpoint always-inserted auto") regressed non-stop remote
debugging.
This was exposed by mi-nsintrall.exp intermittently failing with a
spurious SIGTRAP.
The problem is that when debugging with "target remote", new threads
the target has spawned but have never reported a stop aren't visible
to GDB until it explicitly resyncs its thread list with the target's.
For example, in a program like this:
int
main (void)
{
pthread_t child_thread;
pthread_create (&child_thread, NULL, child_function, NULL);
return 0; <<<< set breakpoint here
}
If the user sets a breakpoint at the "return" statement, and runs the
program, when that breakpoint hit is reported, GDB is only aware of
the main thread. So if we base the decision to remove or insert
breakpoints from the target based on whether all the threads we know
about are stopped, we'll miss that child_thread is running, and thus
we'll remove breakpoints from the target, even through they should
still remain inserted, otherwise child_thread will miss them.
The break-while-running.exp test actually should also be exposing this
thread-list-out-of-synch problem. That test sets a breakpoint while
the main thread is stopped, but other threads are running. Because
other threads are running, the breakpoint is supposed to be inserted
immediately. But, unless something forces a refetch of the thread
list, like, e.g., "info threads", GDB won't be aware of the other
threads that had been spawned by the main thread, and so won't insert
new or old breakpoints in the target. And it turns out that the test
is exactly doing an explicit "info threads", masking out the
problem... This commit adjust the test to exercise the case of not
issuing "info threads". The test then fails without the GDB fix.
In the ni-nsintrall.exp case, what happens is that several threads hit
the same breakpoint, and when the first thread reports the stop,
because GDB wasn't aware other threads exist, all threads known to GDB
are found stopped, so GDB removes the breakpoints from the target.
The other threads follow up with SIGTRAPs too for that same
breakpoint, which has already been removed. For the first few
threads, the moribund breakpoints machinery suppresses the SIGTRAPs,
but after a few events (precisely '3 * thread_count () + 1' at the
time the breakpoint was removed, see update_global_location_list), the
moribund breakpoint machinery is no longer aware of the removed
breakpoint, and the SIGTRAP is reported as a spurious stop.
The fix is naturally then to stop assuming that if no thread in the
list is executing, then the target is fully stopped. We can't know
that until we fully sync the thread list. Because updating the thread
list on every stop would be too much RSP traffic, I chose instead to
update it whenever we're about to present a stop to the user.
Actually updating the thread list at that point happens to be an item
I had added to the local/remote parity wiki page a while ago:
Native GNU/Linux debugging adds new threads to the thread list as
the program creates them "The [New Thread foo] messages". Remote
debugging can't do that, and it's arguable whether we shouldn't even
stop native debugging from doing that, as it hinders inferior
performance. However, a related issue is that with remote targets
(and gdbserver), even after the program stops, the user still needs
to do "info threads" to pull an updated thread list. This, should
most likely be addressed, so that GDB pulls the list itself, perhaps
just before presenting a stop to the user.
With that in place, the need to delay "Program received signal FOO"
was actually caught by the manythreads.exp test. Without that bit, I
was getting:
[Thread 0x7ffff7f13700 (LWP 4499) exited]
[New Thread 0x7ffff7f0b700 (LWP 4500)]
^C
Program received signal SIGINT, Interrupt.
[New Thread 0x7ffff7f03700 (LWP 4501)] <<< new output
[Switching to Thread 0x7ffff7f0b700 (LWP 4500)]
__GI___nptl_death_event () at events.c:31
31 {
(gdb) FAIL: gdb.threads/manythreads.exp: stop threads 1
That is, I was now getting "New Thread" lines after the "Program
received signal" line, and the test doesn't expect them. As the
number of new threads discovered before and after the "Program
received signal" output is unbounded, it's much nicer to defer
"Program received signal" until after synching the thread list, thus
close to the "switching to thread" output and "current frame/source"
info:
[Thread 0x7ffff7863700 (LWP 7647) exited]
^C[New Thread 0x7ffff786b700 (LWP 7648)]
Program received signal SIGINT, Interrupt.
[Switching to Thread 0x7ffff7fc4740 (LWP 6243)]
__GI___nptl_create_event () at events.c:25
25 {
(gdb) PASS: gdb.threads/manythreads.exp: stop threads 1
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-02 Pedro Alves <palves@redhat.com>
* breakpoint.c (breakpoints_should_be_inserted_now): Use
threads_are_executing.
* breakpoint.h (breakpoints_should_be_inserted_now): Add
describing comment.
* gdbthread.h (threads_are_executing): Declare.
(handle_signal_stop) <random signals>: Don't print about the
signal here if stopping.
(end_stepping_range): Don't notify observers here.
(normal_stop): Update the thread list. If stopped by a random
signal or a stepping range ended, notify observers.
* thread.c (threads_executing): New global.
(init_thread_list): Clear 'threads_executing'.
(set_executing): Set or clear 'threads_executing'.
(threads_are_executing): New function.
(update_threads_executing): New function.
(update_thread_list): Use it.
gdb/testsuite/
2014-10-02 Pedro Alves <palves@redhat.com>
* gdb.threads/break-while-running.exp (test): Add new
'update_thread_list' argument. Skip "info threads" if false.
(top level): Add new 'update_thread_list' axis.
Following an exec with "breakpoint always-inserted on" tries to insert
breakpoints in the new image at the addresses the symbols had in the
old image.
With "always-inserted off", we see:
gdb gdb.multi/multi-arch-exec -ex "set breakpoint always-inserted off"
GNU gdb (GDB) 7.8.50.20140924-cvs
...
(gdb) b main
Breakpoint 1 at 0x400664: file gdb.multi/multi-arch-exec.c, line 24.
^^^^^^^^
(gdb) c
The program is not being run.
(gdb) r
Starting program: testsuite/gdb.multi/multi-arch-exec
Breakpoint 1, main () at gdb/testsuite/gdb.multi/multi-arch-exec.c:24
24 execl (BASEDIR "/multi-arch-exec-hello",
(gdb) c
Continuing.
process 9212 is executing new program: gdb/testsuite/gdb.multi/multi-arch-exec-hello
Breakpoint 1, main () at gdb/testsuite/gdb.multi/hello.c:40
40 bar();
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y 0x080484e4 in main at gdb/testsuite/gdb.multi/hello.c:40
^^^^^^^^^^
breakpoint already hit 2 times
(gdb)
Note how main was 0x400664 in multi-arch-exec, and 0x080484e4 in
gdb.multi/hello.
With "always-inserted on", we get:
Breakpoint 1, main () at gdb/testsuite/gdb.multi/multi-arch-exec.c:24
24 execl (BASEDIR "/multi-arch-exec-hello",
(gdb) c
Continuing.
infrun: target_wait (-1, status) =
infrun: 9444 [process 9444],
infrun: status->kind = execd
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_EXECD
Warning:
Cannot insert breakpoint 1.
Cannot access memory at address 0x400664
(gdb)
That is, GDB is trying to insert a breakpoint at 0x400664, after the
exec, and then that address happens to not be mapped at all in the new
image.
The problem is that update_breakpoints_after_exec is creating
breakpoints, which ends up in update_global_location_list immediately
inserting breakpoints if "breakpoints always-inserted" is "on".
update_breakpoints_after_exec is called very early when we see an exec
event. At that point, we haven't loaded the symbols of the new
post-exec image yet, and thus haven't reset breakpoint's addresses to
whatever they may be in the new image. All we should be doing in
update_breakpoints_after_exec is deleting breakpoints that no longer
make sense after an exec. So the fix removes those breakpoint
creations.
The question is then, if not here, where are those breakpoints
re-created? Turns out we don't need to do anything else, because at
the end of follow_exec, we call breakpoint_re_set, whose tail is also
creating exactly the same breakpoints update_breakpoints_after_exec is
currently creating:
breakpoint_re_set (void)
{
...
create_overlay_event_breakpoint ();
create_longjmp_master_breakpoint ();
create_std_terminate_master_breakpoint ();
create_exception_master_breakpoint ();
}
A new test is added to exercise this.
Tested on x86_64 Fedora 20.
gdb/
2014-10-02 Pedro Alves <palves@redhat.com>
PR breakpoints/17431
* breakpoint.c (update_breakpoints_after_exec): Don't create
overlay, longjmp, std terminate nor exception breakpoints here.
gdb/testsuite/
2014-10-02 Pedro Alves <palves@redhat.com>
PR breakpoints/17431
* gdb.base/execl-update-breakpoints.c: New file.
* gdb.base/execl-update-breakpoints.exp: New file.
Currently, with "set breakpoint auto-hw off", we'll still try to
insert a software breakpoint at addresses covered by supposedly
read-only or inacessible regions:
(top-gdb) mem 0x443000 0x450000 ro
(top-gdb) set mem inaccessible-by-default off
(top-gdb) disassemble
Dump of assembler code for function main:
0x0000000000443956 <+34>: movq $0x0,0x10(%rax)
=> 0x000000000044395e <+42>: movq $0x0,0x18(%rax)
0x0000000000443966 <+50>: mov -0x24(%rbp),%eax
0x0000000000443969 <+53>: mov %eax,-0x20(%rbp)
End of assembler dump.
(top-gdb) b *0x0000000000443969
Breakpoint 5 at 0x443969: file ../../src/gdb/gdb.c, line 29.
(top-gdb) c
Continuing.
warning: cannot set software breakpoint at readonly address 0x443969
Breakpoint 5, 0x0000000000443969 in main (argc=1, argv=0x7fffffffd918) at ../../src/gdb/gdb.c:29
29 args.argc = argc;
(top-gdb)
We warn, saying that the insertion can't be done, but then proceed
attempting the insertion anyway, and in case of manually added
regions, the insert actually succeeds.
This is a regression; GDB used to fail inserting the breakpoint. More
below.
I stumbled on this as I wrote a test that manually sets up a read-only
memory region with the "mem" command, in order to test GDB's behavior
with breakpoints set on read-only regions, even when the real memory
the breakpoints are set at isn't really read-only. I wanted that in
order to add a test that exercises software single-stepping through
read-only regions.
Note that the memory regions that target_memory_map returns aren't
like e.g., what would expect to see in /proc/PID/maps on Linux.
Instead, they're the physical memory map from the _debuggers_
perspective. E.g., a read-only region would be real ROM or flash
memory, while a read-only+execute mapping in /proc/PID/maps is still
read-write to the debugger (otherwise the debugger wouldn't be able to
set software breakpoints in the code segment).
If one tries to manually write to memory that falls within a memory
region that is known to be read-only, with e.g., "p foo = 1", then we
hit a check in memory_xfer_partial_1 before the write mananges to make
it to the target side.
But writing a software/memory breakpoint nowadays goes through
target_write_raw_memory, and unlike when writing memory with
TARGET_OBJECT_MEMORY, nothing on the TARGET_OBJECT_RAW_MEMORY path
checks whether we're trying to write to a read-only region.
At the time "breakpoint auto-hw" was added, we didn't have the
TARGET_OBJECT_MEMORY vs TARGET_OBJECT_RAW_MEMORY target object
distinction yet, and the code path in memory_xfer_partial that blocks
writes to read-only memory was hit for memory breakpoints too. With
GDB 6.8 we had:
warning: cannot set software breakpoint at readonly address 0000000000443943
Warning:
Cannot insert breakpoint 1.
Error accessing memory address 0x443943: Input/output error.
So I started out by fixing this by adding the memory region validation
to TARGET_OBJECT_RAW_MEMORY too.
But later, when testing against GDBserver, I realized that that would
only block software/memory breakpoints GDB itself inserts with
gdb/mem-break.c. If a target has a to_insert_breakpoint method, the
insertion request will still pass through to the target. So I ended
up converting the "cannot set breakpoint" warning in breakpoint.c to a
real error return, thus blocking the insertion sooner.
With that, we'll end up no longer needing the TARGET_OBJECT_RAW_MEMORY
changes once software single-step breakpoints are converted to real
breakpoints. We need them today as software single-step breakpoints
bypass insert_bp_location. But, it'll be best to leave that in as
safeguard anyway, for other direct uses of TARGET_OBJECT_RAW_MEMORY.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-01 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location): Error out if inserting a
software breakpoint at a read-only address.
* target.c (memory_xfer_check_region): New function, factored out
from ...
(memory_xfer_partial_1): ... this. Make the 'reg_len' local a
ULONGEST.
(target_xfer_partial) <TARGET_OBJECT_RAW_MEMORY>: Check the access
against the memory region attributes.
gdb/testsuite/
2014-10-01 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.c: New file.
* gdb.base/breakpoint-in-ro-region.exp: New file.
By default, GDB removes all breakpoints from the target when the
target stops and the prompt is given back to the user. This is useful
in case GDB crashes while the user is interacting, as otherwise,
there's a higher chance breakpoints would be left planted on the
target.
But, as long as any thread is running free, we need to make sure to
keep breakpoints inserted, lest a thread misses a breakpoint. With
that in mind, in preparation for non-stop mode, we added a "breakpoint
always-inserted on" mode. This traded off the extra crash protection
for never having threads miss breakpoints, and in addition is more
efficient if there's a ton of breakpoints to remove/insert at each
user command (e.g., at each "step").
When we added non-stop mode, and for a period, we required users to
manually set "always-inserted on" when they enabled non-stop mode, as
otherwise GDB removes all breakpoints from the target as soon as any
thread stops, which means the other threads still running will miss
breakpoints. The test added by this patch exercises this.
That soon revealed a nuisance, and so later we added an extra
"breakpoint always-inserted auto" mode, that made GDB behave like
"always-inserted on" when non-stop was enabled, and "always-inserted
off" when non-stop was disabled. "auto" was made the default at the
same time.
In hindsight, this "auto" setting was unnecessary, and not the ideal
solution. Non-stop mode does depends on breakpoints always-inserted
mode, but only as long as any thread is running. If no thread is
running, no breakpoint can be missed. The same is true for all-stop
too. E.g., if, in all-stop mode, and the user does:
(gdb) c&
(gdb) b foo
That breakpoint at "foo" should be inserted immediately, but it
currently isn't -- currently it'll end up inserted only if the target
happens to trip on some event, and is re-resumed, e.g., an internal
breakpoint triggers that doesn't cause a user-visible stop, and so we
end up in keep_going calling insert_breakpoints. The test added by
this patch also covers this.
IOW, no matter whether in non-stop or all-stop, if the target fully
stops, we can remove breakpoints. And no matter whether in all-stop
or non-stop, if any thread is running in the target, then we need
breakpoints to be immediately inserted. And then, if the target has
global breakpoints, we need to keep breakpoints even when the target
is stopped.
So with that in mind, and aiming at reducing all-stop vs non-stop
differences for all-stop-on-stop-of-non-stop, this patch fixes
"breakpoint always-inserted off" to not remove breakpoints from the
target until it fully stops, and then removes the "auto" setting as
unnecessary. I propose removing it straight away rather than keeping
it as an alias, unless someone complains they have scripts that need
it and that can't adjust.
Tested on x86_64 Fedora 20.
gdb/
2014-09-22 Pedro Alves <palves@redhat.com>
* NEWS: Mention merge of "breakpoint always-inserted" modes "off"
and "auto" merged.
* breakpoint.c (enum ugll_insert_mode): New enum.
(always_inserted_mode): Now a plain boolean.
(show_always_inserted_mode): No longer handle AUTO_BOOLEAN_AUTO.
(breakpoints_always_inserted_mode): Delete.
(breakpoints_should_be_inserted_now): New function.
(insert_breakpoints): Pass UGLL_INSERT to
update_global_location_list instead of calling
insert_breakpoint_locations manually.
(create_solib_event_breakpoint_1): New, factored out from ...
(create_solib_event_breakpoint): ... this.
(create_and_insert_solib_event_breakpoint): Use
create_solib_event_breakpoint_1 instead of calling
insert_breakpoint_locations manually.
(update_global_location_list): Change parameter type from boolean
to enum ugll_insert_mode. All callers adjusted. Adjust to use
breakpoints_should_be_inserted_now and handle UGLL_INSERT.
(update_global_location_list_nothrow): Change parameter type from
boolean to enum ugll_insert_mode.
(_initialize_breakpoint): "breakpoint always-inserted" option is
now a boolean command. Update help text.
* breakpoint.h (breakpoints_always_inserted_mode): Delete declaration.
(breakpoints_should_be_inserted_now): New declaration.
* infrun.c (handle_inferior_event) <TARGET_WAITKIND_LOADED>:
Remove breakpoints_always_inserted_mode check.
(normal_stop): Adjust to use breakpoints_should_be_inserted_now.
* remote.c (remote_start_remote): Likewise.
gdb/doc/
2014-09-22 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Set Breaks): Document that "set breakpoint
always-inserted off" is the default mode now. Delete
documentation of "set breakpoint always-inserted auto".
gdb/testsuite/
2014-09-22 Pedro Alves <palves@redhat.com>
* gdb.threads/break-while-running.exp: New file.
* gdb.threads/break-while-running.c: New file.
This adds a new mode for update_global_location_list, that allows
callers saying "please insert breakpoints, even if
breakpoints_always_inserted_mode() is false". This allows removing a
couple breakpoints_always_inserted_mode checks.
gdb/
2014-09-22 Pedro Alves <palves@redhat.com>
* breakpoint.c (enum ugll_insert_mode): Add UGLL_INSERT.
(insert_breakpoints): Don't call insert_breakpoint_locations here.
Instead, pass UGLL_INSERT to update_global_location_list.
(update_global_location_list): Change parameter type from boolean
to enum ugll_insert_mode. All callers adjusted. Adjust to use
breakpoints_should_be_inserted_now and handle UGLL_INSERT.
(create_solib_event_breakpoint_1): New, factored out from ...
(create_solib_event_breakpoint): ... this.
(create_and_insert_solib_event_breakpoint): Use
create_solib_event_breakpoint_1 instead of calling
insert_breakpoint_locations manually.
(update_global_location_list): Handle UGLL_INSERT.
Later we'll want a tristate, but for now, convert to an enum that maps 1-1
with the current boolean's true/false.
gdb/
2014-09-22 Pedro Alves <palves@redhat.com>
* breakpoint.c (enum ugll_insert_mode): New enum.
(update_global_location_list)
(update_global_location_list_nothrow): Change parameter type from
boolean to enum ugll_insert_mode. All callers adjusted.
PR 12526 reports that -location watchpoints against bitfield arguments
trigger false positives when bits around the bitfield, but not the
bitfield itself, are modified.
This happens because -location watchpoints naturally operate at the
byte level, not at the bit level. When the address of a bitfield
lvalue is taken, information about the bitfield (i.e. its offset and
size) is lost in the process.
This information must first be retained throughout the lifetime of the
-location watchpoint. This patch achieves this by adding two new
fields to the watchpoint struct: val_bitpos and val_bitsize. These
fields are set when a watchpoint is first defined in watch_command_1.
They are both equal to zero if the watchpoint is not a -location
watchpoint or if the argument is not a bitfield.
Then these bitfield parameters are used inside update_watchpoint and
watchpoint_check to extract the actual value of the bitfield from the
watchpoint address, with the help of a local helper function
extract_bitfield_from_watchpoint_value.
Finally when creating a HW breakpoint pointing to a bitfield, we
optimize the address and length of the breakpoint. By skipping over
the bytes that don't cover the bitfield, this step reduces the
frequency at which a read watchpoint for the bitfield is triggered.
It also reduces the number of times a false-positive call to
check_watchpoint is triggered for a write watchpoint.
gdb/
PR breakpoints/12526
* breakpoint.h (struct watchpoint): New fields val_bitpos and
val_bitsize.
* breakpoint.c (watch_command_1): Use these fields to retain
bitfield information.
(extract_bitfield_from_watchpoint_value): New function.
(watchpoint_check): Use it.
(update_watchpoint): Use it. Optimize the address and length of a
HW watchpoint pointing to a bitfield.
* value.h (unpack_value_bitfield): New prototype.
* value.c (unpack_value_bitfield): Make extern.
gdb/testsuite/
PR breakpoints/12526
* gdb.base/watch-bitfields.exp: New file.
* gdb.base/watch-bitfields.c: New file.
The IRIX support wants to set a breakpoint to be hit when the startup
phase is complete, which is where shared libraries have been mapped
in. AFAIU, for most IRIX ports, that location is the entry point.
For MIPS IRIX however, GDB needs to set a breakpoint earlier, in
__dbx_link, as explained by:
#ifdef SYS_syssgi
/* On mips-irix, we need to stop the inferior early enough during
the startup phase in order to be able to load the shared library
symbols and insert the breakpoints that are located in these shared
libraries. Stopping at the program entry point is not good enough
because the -init code is executed before the execution reaches
that point.
So what we need to do is to insert a breakpoint in the runtime
loader (rld), more precisely in __dbx_link(). This procedure is
called by rld once all shared libraries have been mapped, but before
the -init code is executed. Unfortuantely, this is not straightforward,
as rld is not part of the executable we are running, and thus we need
the inferior to run until rld itself has been mapped in memory.
For this, we trace all syssgi() syscall exit events. Each time
we detect such an event, we iterate over each text memory maps,
get its associated fd, and scan the symbol table for __dbx_link().
When found, we know that rld has been mapped, and that we can insert
the breakpoint at the symbol address. Once the dbx_link() breakpoint
has been inserted, the syssgi() notifications are no longer necessary,
so they should be canceled. */
proc_trace_syscalls_1 (pi, SYS_syssgi, PR_SYSEXIT, FLAG_SET, 0);
#endif
The loop in irix_solib_create_inferior_hook then runs until whichever
breakpoint is hit first, the one set by solib-irix.c or the one set by
procfs.c.
Note the comment in disable_break talks about __dbx_init, but I think
that's a typo for __dbx_link:
- /* Note that it is possible that we have stopped at a location that
- is different from the location where we inserted our breakpoint.
- On mips-irix, we can actually land in __dbx_init(), so we should
- not check the PC against our breakpoint address here. See procfs.c
- for more details. */
This looks very much like referring to the loop in
irix_solib_create_inferior_hook stopping at __dbx_link instead of at
the entry point.
What this patch does is convert these deprecated raw breakpoints to
standard solib_event breakpoints. When the first solib-event
breakpoint is hit, we delete all solib-event breakpoints. We do that
in the so_ops->handle_event hook.
This allows getting rid of the loop in irix_solib_create_inferior_hook
completely, which should allow properly handling signals and other
events in the early startup phase, like in SVR4.
Built on x86_64 Fedora 20 with --enable-targets=all (builds
solib-irix.c).
Joel tested that with an earlier version of this patch "info shared"
after starting a program gave the same list of shared libraries as
before.
gdb/ChangeLog:
2014-09-12 Pedro Alves <palves@redhat.com>
* breakpoint.c (remove_solib_event_breakpoints_at_next_stop)
(create_and_insert_solib_event_breakpoint): New functions.
* breakpoint.h (create_and_insert_solib_event_breakpoint)
(remove_solib_event_breakpoints_at_next_stop): New declarations.
* procfs.c (dbx_link_bpt_addr, dbx_link_bpt): Delete globals.
(remove_dbx_link_breakpoint): Delete function.
(insert_dbx_link_bpt_in_file): Use
create_and_insert_solib_event_breakpoint instead of
deprecated_insert_raw_breakpoint.
(procfs_wait): Don't check whether we hit __dbx_link here.
(procfs_mourn_inferior): Don't delete the __dbx_link breakpoint
here.
* solib-irix.c (base_breakpoint): Delete global.
(disable_break): Delete function.
(enable_break): Use create_solib_event_breakpoint
instead of deprecated_insert_raw_breakpoint.
(irix_solib_handle_event): New function.
(irix_solib_create_inferior_hook): Don't run the target or disable
the mapping-complete breakpoint here.
(_initialize_irix_solib): Install irix_solib_handle_event as
so_ops->handle_event hook.
This constifies a few functions in cli-utils -- get_number_trailer and
friends -- and then fixes the fallout.
2014-07-30 Tom Tromey <tromey@redhat.com>
* breakpoint.c (map_breakpoint_numbers): Update.
* cli/cli-utils.c (get_number_trailer): Make "pp" const. Update.
(get_number_const): New function.
(get_number): Rewrite using get_number_const.
(init_number_or_range): Make "string" const.
(number_is_in_list): Make "list" const.
* cli/cli-utils.h (get_number_const): Declare.
(struct get_number_or_range_state) <string, end_ptr>: Now const.
(init_number_or_range, number_is_in_list): Update.
* printcmd.c (map_display_numbers): Update.
* value.c (value_from_history_ref): Constify.
* value.h (value_from_history_ref): Update.
Currently, GDB can pass a signal to the wrong thread in several
different but related scenarios.
E.g., if thread 1 stops for signal SIGFOO, the user switches to thread
2, and then issues "continue", SIGFOO is actually delivered to thread
2, not thread 1. This obviously messes up programs that use
pthread_kill to send signals to specific threads.
This has been a known issue for a long while. Back in 2008 when I
made stop_signal be per-thread (2020b7ab), I kept the behavior -- see
code in 'proceed' being removed -- wanting to come back to it later.
The time has finally come now.
The patch fixes this -- on resumption, intercepted signals are always
delivered to the thread that had intercepted them.
Another example: if thread 1 stops for a breakpoint, the user switches
to thread 2, and then issues "signal SIGFOO", SIGFOO is actually
delivered to thread 1, not thread 2, because 'proceed' first switches
to thread 1 to step over its breakpoint... If the user deletes the
breakpoint before issuing "signal FOO", then the signal is delivered
to thread 2 (the current thread).
"signal SIGFOO" can be used for two things: inject a signal in the
program while the program/thread had stopped for none, bypassing
"handle nopass"; or changing/suppressing a signal the program had
stopped for. These scenarios are really two faces of the same coin,
and GDB can't really guess what the user is trying to do. GDB might
have intercepted signals in more than one thread even (see the new
signal-command-multiple-signals-pending.exp test). At least in the
inject case, it's obviously clear to me that the user means to deliver
the signal to the currently selected thread, so best is to make the
command's behavior consistent and easy to explain.
Then, if the user is trying to suppress/change a signal the program
had stopped for instead of injecting a new signal, but, the user had
changed threads meanwhile, then she will be surprised that with:
(gdb) continue
Thread 1 stopped for signal SIGFOO.
(gdb) thread 2
(gdb) signal SIGBAR
... GDB actually delivers SIGFOO to thread 1, and SIGBAR to thread 2
(with scheduler-locking off, which is the default, because then
"signal" or any other resumption command resumes all threads).
So the patch makes GDB detect that, and ask for confirmation:
(gdb) thread 1
[Switching to thread 1 (Thread 10979)]
(gdb) signal SIGUSR2
Note:
Thread 3 previously stopped with signal SIGUSR2, User defined signal 2.
Thread 2 previously stopped with signal SIGUSR1, User defined signal 1.
Continuing thread 1 (the current thread) with specified signal will
still deliver the signals noted above to their respective threads.
Continue anyway? (y or n)
All these scenarios are covered by the new tests.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-07-25 Pedro Alves <palves@redhat.com>
* NEWS: Mention signal passing and "signal" command changes.
* gdbthread.h (struct thread_suspend_state) <stop_signal>: Extend
comment.
* breakpoint.c (until_break_command): Adjust clear_proceed_status
call.
* infcall.c (run_inferior_call): Adjust clear_proceed_status call.
* infcmd.c (proceed_thread_callback, continue_1, step_once)
(jump_command): Adjust clear_proceed_status call.
(signal_command): Warn if other thread that are resumed have
signals that will be delivered. Adjust clear_proceed_status call.
(until_next_command, finish_command)
(proceed_after_attach_callback, attach_command_post_wait)
(attach_command): Adjust clear_proceed_status call.
* infrun.c (proceed_after_vfork_done): Likewise.
(proceed_after_attach_callback): Adjust comment.
(clear_proceed_status_thread): Clear stop_signal if not in pass
state.
(clear_proceed_status_callback): Delete.
(clear_proceed_status): New 'step' parameter. Only clear the
proceed status of threads the command being prepared is about to
resume.
(proceed): If passed in an explicit signal, override stop_signal
with it. Don't pass the last stop signal to the thread we're
resuming.
(init_wait_for_inferior): Adjust clear_proceed_status call.
(switch_back_to_stepped_thread): Clear the signal if it should not
be passed.
* infrun.h (clear_proceed_status): New 'step' parameter.
(user_visible_resume_ptid): Add comment.
* linux-nat.c (linux_nat_resume_callback): Don't check whether the
signal is in pass state.
* remote.c (append_pending_thread_resumptions): Likewise.
* mi/mi-main.c (proceed_thread): Adjust clear_proceed_status call.
gdb/doc/
2014-07-25 Pedro Alves <palves@redhat.com>
Eli Zaretskii <eliz@gnu.org>
* gdb.texinfo (Signaling) <signal command>: Explain what happens
with multi-threaded programs.
gdb/testsuite/
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-command-handle-nopass.c: New file.
* gdb.threads/signal-command-handle-nopass.exp: New file.
* gdb.threads/signal-command-multiple-signals-pending.c: New file.
* gdb.threads/signal-command-multiple-signals-pending.exp: New file.
* gdb.threads/signal-delivered-right-thread.c: New file.
* gdb.threads/signal-delivered-right-thread.exp: New file.
BINOP_RANGE was added by the following commit for chill language.
commit badefd2800
Author: Per Bothner <per@bothner.com>
Date: Wed Nov 29 22:59:31 1995 +0000
* expression.h (enum exp_opcode): Add BINOP_RANGE.
* expprint.c (dump_expression): Support BINOP_RANGE.
* eval.c (evaluate_subexp_standard): Handle BINOP_RANGE (as error).
(case MULTI_SUBSCRIPT): Fix broken f77 value->int ad hoc conversion.
* ch-lang.c (chill_op_print_tab): Support BINOP_RANGE.
(evaluate_subexp_chill): Error on BINOP_COMMA.
Chill language is no longer supported, so we can remove BINOP_RANGE too.
This patch is to remove BINOP_RANGE.
gdb:
2014-07-20 Yao Qi <yao@codesourcery.com>
* std-operator.def: Remove BINOP_RANGE.
* breakpoint.c (watchpoint_exp_is_const): Update.
* expprint.c (dump_subexp_body_standard): Likewise.
* eval.c (init_array_element): Remove dead code.
(evaluate_subexp_standard): Likewise.
Chill language support was removed several years ago, and BINOP_IN
isn't used for Pascal. This patch is to remove BINOP_IN.
gdb:
2014-07-20 Yao Qi <yao@codesourcery.com>
* std-operator.def: Remove BINOP_IN.
* breakpoint.c (watchpoint_exp_is_const): Update.
* eval.c (evaluate_subexp_standard): Likewise.
* expprint.c (dump_subexp_body_standard): Likewise.
This patch changes a few more spots to use either cmd_sfunc_ftype or
cmd_cfunc_ftype, as appropriate. This is a bit cleaner.
Tested by rebuilding.
2014-07-01 Tom Tromey <tromey@redhat.com>
* breakpoint.c (add_catch_command): Use cmd_sfunc_ftype.
* breakpoint.h (add_catch_command): Use cmd_sfunc_ftype.
* cli/cli-decode.c (cmd_cfunc_eq, add_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, add_info, add_com): Use cmd_cfunc_ftype.
* command.h (cmd_cfunc_ftype): Move earlier.
(add_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, cmd_cfunc_eq)
(add_com, add_info): Use cmd_cfunc_ftype.
This patch is to add ptid into dummy_frame and extend frame_id to
dummy_frame_id (which has a ptid field). With this change, GDB uses
dummy_frame_id (thread ptid and frame_id) to find the dummy frames.
Currently, dummy frames are looked up by frame_id, which isn't
accurate in non-stop or multi-process mode. The test case
gdb.multi/dummy-frame-restore.exp shows the problem and this patch can
fix it.
Test dummy-frame-restore.exp makes two inferiors stop at
different functions, say, inferior 1 stops at f1 while inferior 2
stops at f2. Set a breakpoint to a function, do the inferior call
in two inferiors, and GDB has two dummy frames of the same frame_id.
When the inferior call is finished, GDB will look up a dummy frame
from its stack/list and restore the inferior's regcache. Two
inferiors are finished in different orders, the inferiors' states are
restored differently, which is wrong. Running dummy-frame-restore.exp
under un-patched GDB, we'll get two fails:
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 2
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 1
With this patch applied, GDB will choose the correct dummy_frame to
restore for a given inferior, because ptid is considered when looking up
dummy frames. Two fails above are fixed.
Regression tested on x86_64-linux, both native and gdbserver.
gdb:
2014-06-27 Yao Qi <yao@codesourcery.com>
* breakpoint.c (check_longjmp_breakpoint_for_call_dummy):
Change parameter type to 'struct thread_info *'. Caller
updated.
* breakpoint.h (check_longjmp_breakpoint_for_call_dummy):
Update declaration.
* dummy-frame.c (struct dummy_frame_id): New.
(dummy_frame_id_eq): New function.
(struct dummy_frame) <id>: Change its type to 'struct
dummy_frame_id'.
(dummy_frame_push): Add parameter ptid and save it in
dummy_frame_id.
(pop_dummy_frame_bpt): Use ptid of dummy_frame instead of
inferior_ptid.
(pop_dummy_frame): Assert that the ptid of dummy_frame equals
to inferior_ptid.
(lookup_dummy_frame): Change parameter type to 'struct
dummy_frame_id *'. Callers updated. Call dummy_frame_id_eq
instead of frame_id_eq.
(dummy_frame_pop): Add parameter ptid. Callers updated.
Update comments. Compose dummy_frame_id and pass it to
lookup_dummy_frame.
(dummy_frame_discard): Add parameter ptid.
(dummy_frame_sniffer): Compose dummy_frame_id and call
dummy_frame_id_eq instead of frame_id_eq.
(fprint_dummy_frames): Print ptid.
* dummy-frame.h: Remove comments.
(dummy_frame_push): Add ptid in declaration.
(dummy_frame_pop, dummy_frame_discard): Likewise.
gdb/testsuite:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.multi/dummy-frame-restore.exp: New.
* gdb.multi/dummy-frame-restore.c: New.
gdb/doc:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Maintenance Commands): Update the output of
'maint print dummy-frames' command.
Generally, the blockvector ought to be readonly. So, this patch makes
the blockvector const in the symtab, and also changes various
blockvector APIs to be const.
This patch has a couple of spots that cast away const. I consider
these to be ok because they occur in mdebugread and are used while
constructing the blockvector. I have added comments at these spots.
2014-06-18 Tom Tromey <tromey@redhat.com>
* symtab.h (struct symtab) <blockvector>: Now const.
* ada-lang.c (ada_add_global_exceptions): Update.
* buildsym.c (augment_type_symtab): Update.
* dwarf2read.c (dw2_lookup_symbol): Update.
* jit.c (finalize_symtab): Update.
* jv-lang.c (add_class_symtab_symbol): Update.
* mdebugread.c (parse_symbol, add_block, sort_blocks, new_symtab):
Update.
* objfiles.c (objfile_relocate1): Update.
* psymtab.c (lookup_symbol_aux_psymtabs)
(maintenance_check_psymtabs): Update.
* python/py-symtab.c (stpy_global_block, stpy_static_block):
Update.
* spu-tdep.c (spu_catch_start): Update.
* symmisc.c (dump_symtab_1): Update.
* symtab.c (lookup_global_symbol_from_objfile)
(lookup_symbol_aux_objfile, lookup_symbol_aux_quick)
(basic_lookup_transparent_type_quick)
(basic_lookup_transparent_type, find_pc_sect_symtab)
(find_pc_sect_line, search_symbols): Update.
* block.c (find_block_in_blockvector): Make "bl" const.
(blockvector_for_pc_sect, blockvector_for_pc): Make return type
const.
(blockvector_contains_pc): Make "bv" const.
(block_for_pc_sect): Update.
* block.h (blockvector_for_pc, blockvector_for_pc_sect)
(blockvector_contains_pc): Update.
* breakpoint.c (resolve_sal_pc): Update.
* inline-frame.c (block_starting_point_at): Update.
Using the test program gdb.base/foll-fork.c, with follow-fork-mode set to
"child" and detach-on-fork set to "off", stepping or running past the fork
call results in the child process running to completion, when it should
just finish the single step. In addition, the breakpoint is not removed
from the parent process, so if it is resumed it receives a SIGTRAP.
Cause:
No matter what the setting for detach-on-fork, when stepping past a fork,
the single-step breakpoint (step_resume_breakpoint) is not handled
correctly in the parent. The SR breakpoint is cloned for the child
process, but before the clone is associated with the child it is treated as
a duplicate of the original, associated wth the parent. This results in
the insertion state of the original SR breakpoint and the clone being
"swapped" by breakpoint.c:update_global_location_list, so that the clone is
marked as inserted.
In the case where the parent is not detached, the two breakpoints remain in
that state. The breakpoint is never inserted in the child, because
although the cloned SR breakpoint is associated with the child, it is
marked as inserted. When the child is resumed, it runs to completion. The
breakpoint is never removed from the parent, so that if it is resumed after
the child exits, it gets a SIGTRAP.
Here is the sequence of events:
1) handle_inferior_event: FORK event is recognized.
2) handle_inferior_event: detach_breakpoints removes all breakpoints
from the child.
3) follow_fork: the parent SR breakpoint is cloned. Part of this procedure
is to call update_global_location_list, which swaps the insertion state of
the original and cloned SR breakpoints as part of ensuring that duplicate
breakpoints are only inserted once. At this point the original SR
breakpoint is not marked as inserted, and the clone is. The breakpoint is
actually inserted in the parent but not the child.
4) follow_fork: the original breakpoint is deleted by calling
delete_step_resume_breakpoint. Since the original is not marked as
inserted, the actual breakpoint remains in the parent process.
update_global_location_list is called again as part of the deletion. The
clone is still associated with the parent, but since it is marked as
enabled and inserted, the breakpoint is left in the parent.
5) follow_fork: if detach-on-fork is 'on', the actual breakpoint will be
removed from the parent in target_detach, based on the cloned breakpoint
still associated with the parent. Then the clone is no longer marked as
inserted. In follow_inferior_reset_breakpoints the clone is associated
with the child, and can be inserted.
If detach-on-fork is 'off', the actual breakpoint in the parent is never
removed (although the breakpoint had been deleted from the list). Since
the clone continues to be marked 'inserted', the SR breakpoint is never
inserted in the child.
Fix:
Set the cloned breakpoint as disabled from the moment it is created. This
is done by modifying clone_momentary_breakpoint to take an additional
argument, LOC_ENABLED, which is used as the value of the
bp_location->enabled member. The clone must be disabled at that point
because clone_momentary_breakpoint calls update_global_location_list, which
will swap treat the clone as a duplicate of the original breakpoint if it
is enabled.
All the calls to clone_momentary_breakpoint had to be modified to pass '1'
or '0'. I looked at implementing an enum for the enabled member, but
concluded that readability would suffer because there are so many places it
is used as a boolean, e.g. "if (bl->enabled)".
In follow_inferior_reset_breakpoints the clone is set to enabled once it
has been associated with the child process. With this, the bp_location
'inserted' member is maintained correctly throughout the follow-fork
procedure and the behavior is as expected.
The same treatment is given to the exception_resume_breakpoint when
following a fork.
Testing:
Ran 'make check' on Linux x64.
Along with the fix above, the coverage of the follow-fork test
gdb.base/foll-fork.exp was expanded to:
1) cover all the combinations of values for
follow-fork-mode and detach-on-fork
2) make sure that both user breakpoints and
single-step breakpoints are propagated
correctly to the child
3) check that the inferior list has the
expected contents after following the fork.
4) check that unfollowed, undetached inferiors
can be resumed.
gdb/
2014-06-18 Don Breazeal <donb@codesourcery.com>
* breakpoint.c (set_longjmp_breakpoint): Call
momentary_breakpoint_from_master with additional argument.
(set_longjmp_breakpoint_for_call_dummy): Call
momentary_breakpoint_from_master with additional argument.
(set_std_terminate_breakpoint): Call
momentary_breakpoint_from_master with additional argument.
(momentary_breakpoint_from_master): Add argument to function
definition and use it to initialize structure member flag.
(clone_momentary_breakpoint): Call
momentary_breakpoint_from_master with additional argument.
* infrun.c (follow_inferior_reset_breakpoints): Clear structure
member flags set in momentary_breakpoint_from_master.
gdb/testsuite/
2014-06-18 Don Breazeal <donb@codesourcery.com>
* gdb.base/foll-fork.exp (default_fork_parent_follow):
Deleted procedure.
(explicit_fork_parent_follow): Deleted procedure.
(explicit_fork_child_follow): Deleted procedure.
(test_follow_fork): New procedure.
(do_fork_tests): Replace calls to deleted procedures with
calls to test_follow_fork and reset GDB for subsequent
procedure calls.
Turns out there's a difference between loading the program with "gdb
PROGRAM", vs loading it with "(gdb) file PROGRAM". The latter results
in the objfile ending up with OBJF_USERLOADED set, while not with the
former. (That difference seems bogus, but still that's not the point
of this patch. We can revisit that afterwards.)
The new code that suppresses breakpoint removal errors for
add-symbol-file objects ends up being too greedy:
/* In some cases, we might not be able to remove a breakpoint in
a shared library that has already been removed, but we have
not yet processed the shlib unload event. Similarly for an
unloaded add-symbol-file object - the user might not yet have
had the chance to remove-symbol-file it. shlib_disabled will
be set if the library/object has already been removed, but
the breakpoint hasn't been uninserted yet, e.g., after
"nosharedlibrary" or "remove-symbol-file" with breakpoints
always-inserted mode. */
if (val
&& (bl->loc_type == bp_loc_software_breakpoint
&& (bl->shlib_disabled
|| solib_name_from_address (bl->pspace, bl->address)
|| userloaded_objfile_contains_address_p (bl->pspace,
bl->address))))
val = 0;
as it turns out that OBJF_USERLOADED can be set for objfiles loaded by
some other means not add-symbol-file. In this case, symbol-file (or
"file", which is really just "exec-file"+"symbol-file").
Recall that add-symbol-file is documented as:
(gdb) help add-symbol-file
Load symbols from FILE, assuming FILE has been dynamically loaded.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
And it's the "dynamically loaded" aspect that the breakpoint.c code
cares about. So make add-symbol-file set OBJF_SHARED on its objfiles
too, and tweak the breakpoint.c code to look for OBJF_SHARED instead
of OBJF_USERLOADED.
This restores back the missing breakpoint removal warning when we let
sss-bp-on-user-bp-2.exp run on native GNU/Linux
(https://sourceware.org/ml/gdb-patches/2014-06/msg00335.html):
(gdb) PASS: gdb.base/sss-bp-on-user-bp-2.exp: define stepi_del_break
stepi_del_break
warning: Error removing breakpoint 3
(gdb) FAIL: gdb.base/sss-bp-on-user-bp-2.exp: stepi_del_break
I say "restores" because this was GDB's behavior in 7.7 and earlier.
And, likewise, "file" with no arguments only started turning
breakpoints set in the main executable to "<pending>" with the
remote-symbol-file patch (63644780). The old behavior is now
restored, and we break-unload-file.exp test now exercizes both "gdb;
file PROGRAM" and "gdb PROGRAM".
gdb/
2014-06-16 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location, remove_breakpoint_1): Adjust.
(disable_breakpoints_in_freed_objfile): Skip objfiles that don't
have OBJF_SHARED set.
* objfiles.c (userloaded_objfile_contains_address_p): Rename to...
(shared_objfile_contains_address_p): ... this. Check OBJF_SHARED
instead of OBJF_USERLOADED.
* objfiles.h (OBJF_SHARED): Update comment.
(userloaded_objfile_contains_address_p): Rename to ...
(shared_objfile_contains_address_p): ... this, and update
comments.
* symfile.c (add_symbol_file_command): Also set OBJF_SHARED in the
new objfile.
(remove_symbol_file_command): Skip objfiles that don't have
OBJF_SHARED set.
gdb/testsuite/
2014-06-16 Pedro Alves <palves@redhat.com>
* gdb.base/break-main-file-remove-fail.c: New file.
* gdb.base/break-main-file-remove-fail.exp: New file.
* gdb.base/break-unload-file.exp: Use build_executable instead of
prepare_for_testing.
(test_break): New parameter "initial_load". Handle it.
(top level): Add initial_load cmdline/file axis.
Currently there are many calls to help_list that pass the constant -1
as the "class" value. However, the parameter is declared as being of
type enum command_class, and uses of the constant violate this
abstraction.
This patch fixes the error everywhere it occurs in the gdb sources.
Tested by rebuilding.
2014-06-13 Tom Tromey <tromey@redhat.com>
* cp-support.c (maint_cplus_command): Pass all_commands, not -1,
to help_list.
* guile/guile.c (info_guile_command): Pass all_commands, not -1,
to help_list.
* tui/tui-win.c (tui_command): Pass all_commands, not -1, to
help_list.
* tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to
help_list.Pass all_commands, not -1, to help_list.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, tekhex_dump_command)
(binary_dump_command, binary_append_command): Pass all_commands,
not -1, to help_list.
* cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not
-1, to help_list.
* valprint.c (set_print, set_print_raw): Pass all_commands, not
-1, to help_list.
* typeprint.c (set_print_type): Pass all_commands, not -1, to
help_list.
* top.c (set_history): Pass all_commands, not -1, to help_list.
* target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass
all_commands, not -1, to help_list.
* symfile.c (overlay_command): Pass all_commands, not -1, to
help_list.
* spu-tdep.c (info_spu_command): Pass all_commands, not -1, to
help_list.
* serial.c (serial_set_cmd): Pass all_commands, not -1, to
help_list.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not
-1, to help_list.
* remote.c (remote_command, set_remote_cmd): Pass all_commands,
not -1, to help_list.
* ravenscar-thread.c (set_ravenscar_command): Pass all_commands,
not -1, to help_list.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd): Pass
all_commands, not -1, to help_list.
* macrocmd.c (macro_command): Pass all_commands, not -1, to
help_list.
* language.c (set_check): Pass all_commands, not -1, to help_list.
* infcmd.c (unset_command): Pass all_commands, not -1, to
help_list.
* frame.c (set_backtrace_cmd): Pass all_commands, not -1, to
help_list.
* dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to
help_list.
* dcache.c (set_dcache_command): Pass all_commands, not -1, to
help_list.
* breakpoint.c (save_command): Pass all_commands, not -1, to
help_list.
* ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass
all_commands, not -1, to help_list.
with the following code...
12 Nested; -- break #1
13 return I; -- break #2
14 end;
(line 12 is a call to function Nested)
... we have noticed the following errorneous behavior on ppc-aix,
where, after having inserted a breakpoint at line 12 and line 13,
and continuing from the breakpoint at line 12, the program never
stops at line 13, running away until the program terminates:
% gdb -q func
(gdb) b func.adb:12
Breakpoint 1 at 0x10000a24: file func.adb, line 12.
(gdb) b func.adb:13
Breakpoint 2 at 0x10000a28: file func.adb, line 13.
(gdb) run
Starting program: /[...]/func
Breakpoint 1, func () at func.adb:12
12 Nested; -- break #1
(gdb) c
Continuing.
[Inferior 1 (process 4128872) exited with code 02]
When resuming from the first breakpoint, GDB first tries to step out
of that first breakpoint. We rely on software single-stepping on this
platform, and it just so happens that the address of the first
software single-step breakpoint is the same as the user's breakpoint
#2 (0x10000a28). So, with infrun and target traces turned on (but
uninteresting traces snip'ed off), the "continue" operation looks like
this:
(gdb) c
### First, we insert the user breakpoints (the second one is an internal
### breakpoint on __pthread_init). The first user breakpoint is not
### inserted as we need to step out of it first.
target_insert_breakpoint (0x0000000010000a28, xxx) = 0
target_insert_breakpoint (0x00000000d03f3800, xxx) = 0
### Then we proceed with the step-out-of-breakpoint...
infrun: resume (step=1, signal=GDB_SIGNAL_0), trap_expected=1, current thread [process 15335610] at 0x10000a24
### That's when we insert the SSS breakpoints...
target_insert_breakpoint (0x0000000010000a28, xxx) = 0
target_insert_breakpoint (0x00000000100009ac, xxx) = 0
### ... then let the inferior resume...
target_resume (15335610, continue, 0)
infrun: wait_for_inferior ()
target_wait (-1, status, options={}) = 15335610, status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: target_wait (-1, status) =
infrun: 15335610 [process 15335610],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: infwait_normal_state
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x100009ac
### At this point, we stopped at the second SSS breakpoint...
target_stopped_by_watchpoint () = 0
### We remove the SSS breakpoints...
target_remove_breakpoint (0x0000000010000a28, xxx) = 0
target_remove_breakpoint (0x00000000100009ac, xxx) = 0
target_stopped_by_watchpoint () = 0
### We find that we're not done, so we resume....
infrun: no stepping, continue
### And thus insert the user breakpoints again, except we're not
### inserting the second breakpoint?!?
target_insert_breakpoint (0x0000000010000a24, xxx) = 0
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 15335610] at 0x100009ac
target_resume (-1, continue, 0)
infrun: prepare_to_wait
target_wait (-1, status, options={}) = 15335610, status->kind = exited, status = 2
What happens is that the removal of the software single-step
breakpoints effectively removed the breakpoint instruction from
inferior memory. But because such breakpoints are inserted directly
as raw breakpoints rather than through the normal chain of
breakpoints, we fail to notice that one of the user breakpoints points
to the same address and that this user breakpoint is therefore
effectively un-inserted. When resuming after the single-step, GDB
thinks that the user breakpoint is still inserted and therefore does
not need to insert it again.
This patch teaches the insert and remove routines of both regular and
raw breakpoints to be aware of each other. Special care needs to be
applied in case the target supports evaluation of breakpoint
conditions or commands.
gdb/ChangeLog:
PR breakpoints/17000
* breakpoint.c (find_non_raw_software_breakpoint_inserted_here):
New function, extracted from software_breakpoint_inserted_here_p.
(software_breakpoint_inserted_here_p): Replace factored out code
by call to find_non_raw_software_breakpoint_inserted_here.
(bp_target_info_copy_insertion_state): New function.
(bkpt_insert_location): Handle the case of a single-step
breakpoint already inserted at the same address.
(bkpt_remove_location): Handle the case of a single-step
breakpoint still inserted at the same address.
(deprecated_insert_raw_breakpoint): Handle the case of non-raw
breakpoint already inserted at the same address.
(deprecated_remove_raw_breakpoint): Handle the case of a
non-raw breakpoint still inserted at the same address.
(find_single_step_breakpoint): New function, extracted from
single_step_breakpoint_inserted_here_p.
(find_single_step_breakpoint): New function,
factored out from single_step_breakpoint_inserted_here_p.
(single_step_breakpoint_inserted_here_p): Reimplement.
gdb/testsuite/ChangeLog:
PR breakpoints/17000
* gdb.base/sss-bp-on-user-bp.exp: Remove kfail.
* gdb.base/sss-bp-on-user-bp-2.exp: Remove kfail.
Tested on ppc-aix with AdaCore's testsuite. Tested on x86_64-linux,
(native and gdbserver) with the official testsuite. Also tested on
x86_64-linux through Pedro's branch enabling software single-stepping
on that platform (native and gdbserver).
While the full fix for PR 15180 isn't in, it's best if we at least
make sure that GDB doesn't lose control when a breakpoint is set at
the same address as a dprintf.
gdb/
2014-06-02 Pedro Alves <palves@redhat.com>
* breakpoint.c (build_target_command_list): Don't build a command
list if we have any duplicate location that isn't a dprintf.
gdb/testsuite/
2014-06-02 Pedro Alves <palves@redhat.com>
* gdb.base/dprintf-bp-same-addr.c: New file.
* gdb.base/dprintf-bp-same-addr.exp: New file.
If some event happens to trigger at the same address as a dprintf-style
agent dprintf is installed, GDB will complain, like:
(gdb) continue
Continuing.
May only run agent-printf on the target
(gdb)
Such dprintfs are completely handled on the target side, so they can't
explain a stop, but GDB is currently putting then on the bpstat chain
anyway, because they currently unconditionally use bkpt_breakpoint_hit
as breakpoint_hit method.
gdb/
2014-06-02 Pedro Alves <palves@redhat.com>
* breakpoint.c (dprintf_breakpoint_hit): New function.
(initialize_breakpoint_ops): Install it as dprintf's
breakpoint_hit method.
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
Without the code portion of the patch, we get these failures:
FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue
FAIL: gdb.base/break-unload-file.exp: always-inserted on: hbreak: continue
FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: end here
They all looks like random SIGTRAPs:
continue
Continuing.
Program received signal SIGTRAP, Trace/breakpoint trap.
0x0000000000400541 in foo () at ../../../src/gdb/testsuite/gdb.base/break-unload-file.c:21
21 }
(gdb) FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue
(This is a regression caused by the remove-symbol-file command
series.)
break-unload-file.exp is about having breakpoints inserted, and then
doing "file". I caught this while writing a test that does "file
PROGRAM", while PROGRAM was already loaded, which internally does
"file" first, because I wanted to force a breakpoint_re_set, but the
test is more explicit in case GDB ever optimizes out that re-set.
The problem is that unloading the file with "file" ends up in
disable_breakpoints_in_freed_objfile, which marks all breakpoint
locations of the objfile as both shlib_disabled, _and_ clears the
inserted flag, without actually removing the breakpoints from the
inferior. Now, usually, in all-stop, breakpoints will already be
removed from the inferior before the user can issue the "file"
command, but, with non-stop, or breakpoints always-inserted on mode,
breakpoints stay inserted even while the user has the prompt. In the
latter case, then, if we let the program continue, and it executes the
address where we had previously set the breakpoint, it'll actually
execute the breakpoint instruction that we left behind...
Now, one issue is that the intent of
disable_breakpoints_in_freed_objfile is really to handle the unloading
of OBJF_USERLOADED objfiles. These are objfiles that were added with
add-symbol-file and that are removed with remove-symbol-file.
"add-symbol-file"'s docs in the manual clearly say these commands are
used to let GDB know about dynamically loaded code:
You would use this command when @var{filename} has been dynamically
loaded (by some other means) into the program that is running.
Similarly, the online help says:
(gdb) help add-symbol-file
Load symbols from FILE, assuming FILE has been dynamically loaded.
So it makes sense to, like when shared libraries are unloaded through
the generic solib machinery, mark the breakpoint locations as
shlib_disabled. But, the "file" command is not about dynamically
loaded code, it's about the main program. So the patch makes
disable_breakpoints_in_freed_objfile skip all objfiles but
OBJF_USERLOADED ones, thus skipping the main objfile.
Then, the reason that disable_breakpoints_in_freed_objfile was
clearing the inserted flag isn't clear, but likely to avoid breakpoint
removal errors, assuming remove-symbol-file was called after the
dynamic object was already unmapped from the inferior. In that case,
it'd okay to simply clear the inserted flag, but not so if the user
for example does remove-symbol-file to remove the library because he
made a mistake in the library's address, and wants to re-do
add-symbol-file with the correct address.
To address all that, I propose an alternative implementation, that
handles both cases. The patch includes changes to sym-file.exp to
cover them.
This implementation leaves the inserted flag alone, and handles
breakpoint insertion/removal failure gracefully when the locations are
in OBJF_USERLOADED objfiles, just like we handle insertion/removal
failure gracefully for locations in shared libraries.
To try to make sure we aren't patching back stale shadow memory
contents into the inferior, in case the program mapped a different
library at the same address where we had the breakpoint, without the
user having had a chance of remove-symbol-file'ing before, this adds a
new memory_validate_breakpoint function that checks if the breakpoint
instruction is still in memory. ppc_linux_memory_remove_breakpoint
does this unconditionally for all memory breakpoints, and questions
whether memory_remove_breakpoint should be changed to do this for all
breakpoints. Possibly yes, though I'm not certain, hence this
baby-steps patch.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2014-04-23 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location): Tolerate errors if the
breakpoint is set in a user-loaded objfile.
(remove_breakpoint_1): Likewise. Also tolerate errors if the
location is marked shlib_disabled. If the breakpoint is set in a
user-loaded objfile is a GDB-side memory breakpoint, validate it
before uninsertion. (disable_breakpoints_in_freed_objfile): Skip
non-OBJF_USERLOADED objfiles. Don't clear the location's inserted
flag.
* mem-break.c (memory_validate_breakpoint): New function.
* objfiles.c (userloaded_objfile_contains_address_p): New
function.
* objfiles.h (userloaded_objfile_contains_address_p): Declare.
* target.h (memory_validate_breakpoint): New declaration.
gdb/testsuite/
2014-04-23 Pedro Alves <palves@redhat.com>
* gdb.base/break-unload-file.c: New file.
* gdb.base/break-unload-file.exp: New file.
* gdb.base/sym-file-lib.c (baz): New function.
* gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
field.
(load): Store the segment's mapped size.
(unload): New function.
(unload_shlib): New function.
* gdb.base/sym-file-loader.h (unload_shlib): New declaration.
* gdb.base/sym-file-main.c (main): Unload, and reload the library,
set a breakpoint at baz, and call it.
* gdb.base/sym-file.exp: New tests for stale breakpoint
instructions.
libraries.
As explained in
https://sourceware.org/ml/gdb-patches/2008-08/msg00361.html, after a
shared library was unloaded, we can no longer insert or remove
breakpoints into/from its (no longer present) code segment. That'll
fail with memory errors. However, that concern does not apply to
hardware breakpoints. By definition, hardware breakpoints are
implemented using a mechanism that is not dependent on being able to
modify the target's memory. Usually, by setting up CPU debug
registers. IOW, we should be able to set hw breakpoints in an
unmapped address. We don't seem to have a test that exercises that,
so this patch adds one.
I noticed the error supression because of a related issue -- the
target_insert_hw_breakpoint/target_remove_hw_breakpoint interfaces
don't really distinguish "not supported" from "error" return, and so
remote.c returns -1 in both cases. This results in hardware
breakpoints set in shared libraries silently ending up pending forever
even though the target doesn't actually support hw breakpoints.
(gdb) set breakpoint always-inserted on
(gdb) set remote Z-packet off
(gdb) info breakpoints
No breakpoints or watchpoints.
(gdb) hbreak shrfunc
Hardware assisted breakpoint 3 at 0x7ffff7dfb657: file ../../../src/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c, line 21.
(gdb) info break
Num Type Disp Enb Address What
3 hw breakpoint keep y <PENDING> shrfunc
After the patch we get the expected:
(gdb) hbreak shrfunc
Hardware assisted breakpoint 3 at 0x7ffff7dfb657: file ../../../src/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c, line 21.
Warning:
Cannot insert hardware breakpoint 3.
Could not insert hardware breakpoints:
You may have requested too many hardware breakpoints/watchpoints.
(gdb) info break
Num Type Disp Enb Address What
3 hw breakpoint keep y 0x00007ffff7dfb657 in shrfunc at ../../../src/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c:21
(HW breakpoints set in the main executable, when the target doesn't
support HW breakpoints always resulted in the latter output.)
We probably should improve the insert/remove interface to return a
different error code for unsupported. But I chose to fix the error
supression first, as it's a deeper and wider issue.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2014-04-23 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location, remove_breakpoint_1): If
the breakpoint is set in a shared library, only suppress
errors for software breakpoints, not hardware breakpoints.
gdb/testsuite/
2014-04-23 Pedro Alves <palves@redhat.com>
* gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
* gdb.base/hbreak-in-shr-unsupported.c: New file.
* gdb.base/hbreak-in-shr-unsupported.exp: New file.
* gdb.base/hbreak-unmapped.c: New file.
* gdb.base/hbreak-unmapped.exp: New file.
* gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
* lib/gdb.exp (gdb_is_target_remote): ... here.
Breakpoints are supposed to be transparent to memory accesses. For
all kinds of breakpoints breakpoint_xfer_memory hides the breakpoint
instructions. However, sss breakpoints aren't tracked like all other
breakpoints, and nothing is taking care of hiding them from memory
reads.
Say, as is, a background step + disassemble will see breakpoints
instructions on software step targets. E.g., stepping over this line:
while (1);
with s&
and then "disassemble" would show sss breakpoints.
Actually, that's still not be possible to see today, because:
- in native Linux, you can't read memory while the program
is running.
- with Linux gdbserver, you can, but in the all-stop RSP you
can't talk to the server while the program is running...
- and with non-stop, on software step targets, we presently
force the use of displaced-stepping for all single-steps,
so no single-step breakpoints are used...
I've been working towards making non-stop not force displaced stepping
on sss targets, and I noticed the issue then. With that, I indeed see
this:
(gdb) set remote Z-packet off
(gdb) s&
(gdb) disassemble main
Dump of assembler code for function main:
0x000000000040049c <+0>: push %rbp
0x000000000040049d <+1>: mov %rsp,%rbp
0x00000000004004a0 <+4>: int3
0x00000000004004a1 <+5>: (bad)
End of assembler dump.
Instead of the correct:
(gdb) disassemble main
Dump of assembler code for function main:
0x000000000040049c <+0>: push %rbp
0x000000000040049d <+1>: mov %rsp,%rbp
0x00000000004004a0 <+4>: jmp 0x4004a0 <main+4>
This is actually one thing that my v1 of the recent "fix a bunch of
run control bugs" series was fixing, because it made sss breakpoints
be regular breakpoints in the breakpoint chain. But dropped it in the
version that landed in the tree, due to some problems.
So instead of making sss breakpoints regular breakpoints, go with a
simpler fix (at least for now) -- make breakpoint_xfer_memory take
software single-step breakpoints into account. After the patch, I get
the correct disassemble output.
Tested on x86_64 Fedora 17, and also on top of my "use software
single-step on x86" series.
Also fixes the issue pointed out by Yao at
https://sourceware.org/ml/gdb-patches/2014-04/msg00045.html, where the
prologue analysis/frame sniffing manages to see software step
breakpoint instructions.
gdb/
2014-04-10 Pedro Alves <palves@redhat.com>
* breakpoint.c (single_step_breakpoints)
(single_step_gdbarch): Move up in the file.
(one_breakpoint_xfer_memory): New function, factored out from ...
(breakpoint_xfer_memory): ... here. Also process single-step
breakpoints.
Even with deferred_step_ptid out of the way, GDB can still lose
watchpoints.
If a watchpoint triggers and the PC points to an address where a
thread-specific breakpoint for another thread is set, the thread-hop
code triggers, and we lose the watchpoint:
if (ecs->event_thread->suspend.stop_signal == GDB_SIGNAL_TRAP)
{
int thread_hop_needed = 0;
struct address_space *aspace =
get_regcache_aspace (get_thread_regcache (ecs->ptid));
/* Check if a regular breakpoint has been hit before checking
for a potential single step breakpoint. Otherwise, GDB will
not see this breakpoint hit when stepping onto breakpoints. */
if (regular_breakpoint_inserted_here_p (aspace, stop_pc))
{
if (!breakpoint_thread_match (aspace, stop_pc, ecs->ptid))
thread_hop_needed = 1;
^^^^^^^^^^^^^^^^^^^^^
}
And on software single-step targets, even without a thread-specific
breakpoint in the way, here in the thread-hop code:
else if (singlestep_breakpoints_inserted_p)
{
...
if (!ptid_equal (singlestep_ptid, ecs->ptid)
&& in_thread_list (singlestep_ptid))
{
/* If the PC of the thread we were trying to single-step
has changed, discard this event (which we were going
to ignore anyway), and pretend we saw that thread
trap. This prevents us continuously moving the
single-step breakpoint forward, one instruction at a
time. If the PC has changed, then the thread we were
trying to single-step has trapped or been signalled,
but the event has not been reported to GDB yet.
There might be some cases where this loses signal
information, if a signal has arrived at exactly the
same time that the PC changed, but this is the best
we can do with the information available. Perhaps we
should arrange to report all events for all threads
when they stop, or to re-poll the remote looking for
this particular thread (i.e. temporarily enable
schedlock). */
CORE_ADDR new_singlestep_pc
= regcache_read_pc (get_thread_regcache (singlestep_ptid));
if (new_singlestep_pc != singlestep_pc)
{
enum gdb_signal stop_signal;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: unexpected thread,"
" but expected thread advanced also\n");
/* The current context still belongs to
singlestep_ptid. Don't swap here, since that's
the context we want to use. Just fudge our
state and continue. */
stop_signal = ecs->event_thread->suspend.stop_signal;
ecs->event_thread->suspend.stop_signal = GDB_SIGNAL_0;
ecs->ptid = singlestep_ptid;
ecs->event_thread = find_thread_ptid (ecs->ptid);
ecs->event_thread->suspend.stop_signal = stop_signal;
stop_pc = new_singlestep_pc;
}
else
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: unexpected thread\n");
thread_hop_needed = 1;
stepping_past_singlestep_breakpoint = 1;
saved_singlestep_ptid = singlestep_ptid;
}
}
}
we either end up with thread_hop_needed, ignoring the watchpoint
SIGTRAP, or switch to the stepping thread, again ignoring that the
SIGTRAP could be for some other event.
The new test added by this patch exercises both paths.
So the fix is similar to the deferred_step_ptid fix -- defer the
thread hop to _after_ the SIGTRAP had a change of passing through the
regular bpstat handling. If the wrong thread hits a breakpoint, we'll
just end up with BPSTAT_WHAT_SINGLE, and if nothing causes a stop,
keep_going starts a step-over.
Most of the stepping_past_singlestep_breakpoint mechanism is really
not necessary -- setting the thread to step over a breakpoint with
thread->trap_expected is sufficient to keep all other threads locked.
It's best to still keep the flag in some form though, because when we
get to keep_going, the software single-step breakpoint we need to step
over is already gone -- an optimization done by a follow up patch will
check whether a step-over is still be necessary by looking to see
whether the breakpoint is still there, and would find the thread no
longer needs a step-over, while we still want it.
Special care is still needed to handle the case of PC of the thread we
were trying to single-step having changed, like in the old code. We
can't just keep_going and re-step it, as in that case we can over-step
the thread (if it was already done with the step, but hasn't reported
it yet, we'd ask it to step even further). That's now handled in
switch_back_to_stepped_thread. As bonus, we're now using a technique
that doesn't lose signals, unlike the old code -- we now insert a
breakpoint at PC, and resume, which either reports the breakpoint
immediately, or any pending signal.
Tested on x86_64 Fedora 17, against pristine mainline, and against a
branch that implements software single-step on x86.
gdb/
2014-03-20 Pedro Alves <palves@redhat.com>
* breakpoint.c (single_step_breakpoint_inserted_here_p): Make
extern.
* breakpoint.h (single_step_breakpoint_inserted_here_p): Declare.
* infrun.c (saved_singlestep_ptid)
(stepping_past_singlestep_breakpoint): Delete.
(resume): Remove stepping_past_singlestep_breakpoint handling.
(proceed): Store the prev_pc of the stepping thread too.
(init_wait_for_inferior): Adjust. Clear singlestep_ptid and
singlestep_pc.
(enum infwait_states): Delete infwait_thread_hop_state.
(struct execution_control_state) <hit_singlestep_breakpoint>: New
field.
(handle_inferior_event): Adjust.
(handle_signal_stop): Delete stepping_past_singlestep_breakpoint
handling and the thread-hop code. Before removing single-step
breakpoints, check whether the thread hit a single-step breakpoint
of another thread. If it did, the trap is not a random signal.
(switch_back_to_stepped_thread): If the event thread hit a
single-step breakpoint, unblock it before switching to the
stepping thread. Handle the case of the stepped thread having
advanced already.
(keep_going): Handle the case of the current thread moving past a
single-step breakpoint.
gdb/testsuite/
2014-03-20 Pedro Alves <palves@redhat.com>
* gdb.threads/step-over-trips-on-watchpoint.c: New file.
* gdb.threads/step-over-trips-on-watchpoint.exp: New file.
Say the program is stopped at a breakpoint, and the user sets a
watchpoint. When the program is next resumed, GDB will first step
over the breakpoint, as explained in the manual:
@value {GDBN} normally ignores breakpoints when it resumes
execution, until at least one instruction has been executed. If it
it did not do this, you would be unable to proceed past a breakpoint
without first disabling the breakpoint. This rule applies whether
or not the breakpoint already existed when your program stopped.
However, GDB currently also removes watchpoints, catchpoints, etc.,
and that means that the first instruction off the breakpoint does not
trigger the watchpoint, catchpoint, etc.
testsuite/gdb.base/watchpoint.exp has a kfail for this.
The PR proposes installing watchpoints only when stepping over a
breakpoint, but that misses catchpoints, etc.
A better fix would instead work from the opposite direction -- remove
only real breakpoints, leaving all other kinds of breakpoints
inserted.
But, going further, it's really a waste to constantly remove/insert
all breakpoints when stepping over a single breakpoint (generating a
pair of RSP z/Z packets for each breakpoint), so the fix goes a step
further and makes GDB remove _only_ the breakpoint being stepped over,
leaving all others installed. This then has the added benefit of
reducing breakpoint-related RSP traffic substancialy when there are
many breakpoints set.
gdb/
2014-03-20 Pedro Alves <palves@redhat.com>
PR breakpoints/7143
* breakpoint.c (should_be_inserted): Don't insert breakpoints that
are being stepped over.
(breakpoint_address_match): Make extern.
* breakpoint.h (breakpoint_address_match): New declaration.
* inferior.h (stepping_past_instruction_at): New declaration.
* infrun.c (struct step_over_info): New type.
(step_over_info): New global.
(set_step_over_info, clear_step_over_info)
(stepping_past_instruction_at): New functions.
(handle_inferior_event): Clear the step-over info when
trap_expected is cleared.
(resume): Remove now stale comment.
(clear_proceed_status): Clear step-over info.
(proceed): Adjust step-over handling to set or clear the step-over
info instead of removing all breakpoints.
(handle_signal_stop): When setting up a thread-hop, don't remove
breakpoints here.
(stop_stepping): Clear step-over info.
(keep_going): Adjust step-over handling to set or clear step-over
info and then always inserting breakpoints, instead of removing
all breakpoints when stepping over one.
gdb/testsuite/
2014-03-20 Pedro Alves <palves@redhat.com>
PR breakpoints/7143
* gdb.base/watchpoint.exp: Mention bugzilla bug number instead of
old gnats gdb/38. Remove kfail. Adjust to use gdb_test instead
of gdb_test_multiple.
* gdb.cp/annota2.exp: Remove kfail for gdb/38.
* gdb.cp/annota3.exp: Remove kfail for gdb/38.
Pedro Alves
Joel Brobecker
Simon Marchi
Sergio Durigan Junior
Doug Evans
Jan Kratochvil
Gary Benson
Maciej W. Rozycki
Patrick Palka
Tom Tromey
Yao Qi
Luis Machado