This patch removes all special cases for HP-UX, for which support has
been removed earlier, that I found in the testsuite. Note that the hppa
architecture != HP-UX, since other OSes can run on hppa, so I tried to
leave everything that is not HP-UX specific.
Two complete tests were completely HP-UX specific, so I removed them.
I ran the testsuite on Linux x86-64, native and native-gdbserver, and
noticed no regressions.
gdb/testsuite/ChangeLog:
* gdb.asm/asm-source.exp: Remove HP-UX references.
* gdb.base/annota1.exp: Likewise.
* gdb.base/annota3.exp: Likewise.
* gdb.base/attach.exp: Likewise.
* gdb.base/bigcore.exp: Likewise.
* gdb.base/break.exp: Likewise.
* gdb.base/call-ar-st.exp: Likewise.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/catch-fork-static.exp: Likewise.
* gdb.base/display.exp: Likewise.
* gdb.base/foll-exec-mode.exp: Likewise.
* gdb.base/foll-exec.exp: Likewise.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/inferior-died.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/solib1.c: Likewise.
* gdb.base/step-test.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.multi/bkpt-multi-exec.ex: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/staticthreads.exp: Likewise.
* lib/future.exp: Likewise.
* lib/gdb.exp: Likewise.
* gdb.base/so-indr-cl.c: Remove.
* gdb.base/so-indr-cl.exp: Likewise.
* gdb.base/solib.c: Likewise.
* gdb.base/solib.exp: Likewise.
* gdb.base/solib2.c: Likewise.
The buildbots show that attach-many-short-lived-thread.exp is racy.
But after staring at debug logs and playing with SystemTap scripts for
a (long) while, I figured out that neither GDB, nor the kernel nor the
test's program itself are at fault.
The problem is simply that the testsuite machinery is currently
subject to PID-reuse races. The attach-many-short-lived-threads.c
test program just happens to be much more susceptible to trigger this
race because threads and processes share the same number space on
Linux, and the test spawns many many short lived threads in
succession, thus enlarging the race window a lot.
Part of the problem is that several tests spawn processes with "exec&"
(in order to test the "attach" command) , and then at the end of the
test, to make sure things are cleaned up, issue a 'remote_spawn "kill
-p $testpid"'. Since with tcl's "exec&", tcl itself is responsible
for reaping the process's exit status, when we go kill the process,
testpid may have already exited _and_ its status may have (and often
has) been reaped already. Thus it can happen that another process
meanwhile reuses $testpid, and that "kill" command kills the wrong
process... Frequently, that happens to be
attach-many-short-lived-thread, but this explains other test's races
as well.
In the attach-many-short-lived-threads test, it sometimes manifests
like this:
(gdb) file /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads
Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads...done.
(gdb) Loaded /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads into /home/pedro/gdb/mygit/build/gdb/testsuite/../../gdb/gdb
attach 5940
Attaching to program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads, process 5940
warning: process 5940 is a zombie - the process has already terminated
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ptrace: Operation not permitted.
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
info threads
No threads.
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
set breakpoint always-inserted on
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
Other times the process dies while the test is ongoing (the process is
ptrace-stopped):
(gdb) print again = 1
Cannot access memory at address 0x6020cc
(gdb) FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
(Recall that on Linux, SIGKILL is not interceptable)
And other times it dies just while we're detaching:
$4 = 319
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
detach
Can't detach Thread 0x7fb13b7de700 (LWP 1842): No such process
(gdb) FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
GDB mishandles the latter (it should ignore ESRCH while detaching just
like when continuing), but that's another story.
The fix here is to change spawn_wait_for_attach to use Expect's
'spawn' command instead of Tcl's 'exec&' to spawn programs, because
with spawn we control when to wait for/reap the process. That allows
killing the process by PID without being subject to pid-reuse races,
because even if the process is already dead, the kernel won't reuse
the process's PID until the zombie is reaped.
The other part of the problem lies in DejaGnu itself, unfortunately.
I have occasionally seen tests (attach-many-short-lived-threads
included, but not only that one) die with a random inexplicable
SIGTERM too, and that too is caused by the same reason, except that in
that case, the rogue SIGTERM is sent from this bit in DejaGnu's remote.exp:
exec sh -c "exec > /dev/null 2>&1 && (kill -2 $pgid || kill -2 $pid) && sleep 5 && (kill $pgid || kill $pid) && sleep 5 && (kill -9 $pgid || kill -9 $pid) &"
...
catch "wait -i $shell_id"
Even if the program exits promptly, that whole cascade of kills
carries on in the background, thus potentially killing the poor
process that manages to reuse $pid...
I sent a fix for that to the DejaGnu list:
http://lists.gnu.org/archive/html/dejagnu/2015-07/msg00000.html
With both patches in place, I haven't seen
attach-many-short-lived-threads.exp fail again.
Tested on x86_64 Fedora 20, native, gdbserver and extended-gdbserver.
gdb/testsuite/ChangeLog:
2015-07-31 Pedro Alves <palves@redhat.com>
* gdb.base/attach-pie-misread.exp: Rename $res to $test_spawn_id.
Use spawn_id_get_pid. Wait for spawn id after eof. Use
kill_wait_spawned_process instead of explicit "kill -9".
* gdb.base/attach-pie-noexec.exp: Adjust to spawn_wait_for_attach
returning a spawn id instead of a pid. Use spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/attach-twice.exp: Likewise.
* gdb.base/attach.exp: Likewise.
(do_command_attach_tests): Use gdb_spawn_with_cmdline_opts and
gdb_test_multiple.
* gdb.base/solib-overlap.exp: Adjust to spawn_wait_for_attach
returning a spawn id instead of a pid. Use spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/valgrind-infcall.exp: Likewise.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.threads/attach-into-signal.exp (corefunc): Use
spawn_wait_for_attach, spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.threads/attach-many-short-lived-threads.exp: Adjust to
spawn_wait_for_attach returning a spawn id instead of a pid. Use
spawn_id_get_pid and kill_wait_spawned_process.
* gdb.threads/attach-stopped.exp (corefunc): Use
spawn_wait_for_attach, spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/break-interp.exp: Rename $res to $test_spawn_id.
Use spawn_id_get_pid. Wait for spawn id after eof. Use
kill_wait_spawned_process instead of explicit "kill -9".
* lib/gdb.exp (can_spawn_for_attach): Adjust comment.
(kill_wait_spawned_process, spawn_id_get_pid): New procedures.
(spawn_wait_for_attach): Use spawn instead of exec to spawn
processes. Don't map cygwin/windows pids here. Now returns a
spawn id list.
This commit fixes three gdb.base/attach.exp failures when using
extended remote targets. The failures occurred because GDB now
locates and loads files when attaching on remote targets if the
remote target supports qXfer:exec-file:read; the filenames were
shown but with "target:" prefixes which the test has been updated
to handle.
gdb/testsuite/ChangeLog:
* gdb.base/attach.exp: Fix three extended remote failures.
We already skip "attach" tests if the target board is remote, in
dejagnu's sense, as we use TCL's exec to spawn the program on the
build machine. We should also skip these tests if testing with
"target remote" or other stub-like targets where "attach" doesn't make
sense.
Add a helper procedure that centralizes the checks a test that needs
to spawn a program for testing "attach" and make all test files that
use spawn_wait_for_attach check it.
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (can_spawn_for_attach): New procedure.
(spawn_wait_for_attach): Error out if can_spawn_for_attach returns
false.
* gdb.base/attach.exp: Use can_spawn_for_attach instead of
checking whether the target board is remote.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Use can_spawn_for_attach before the
tests that need to attach, instead of checking whether the target
board is remote at the top of the file.
I have started seeing occasional runaway 'attach' processes these days.
I cannot be certain it is really caused by this patch, for example
grep 'FAIL.*cmdline attach run' does not show anything in my logs.
But as I remember this 'attach' runaway process always happened in GDB (but
I do not remember it in the past months) I think it would be most safe to just
solve it forever by [attached].
gdb/testsuite/ChangeLog
2014-09-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/attach.c: Include unistd.h.
(main): Call alarm. Add label postloop.
* gdb.base/attach.exp (do_attach_tests): Use gdb_get_line_number,
gdb_breakpoint, gdb_continue_to_breakpoint.
(test_command_line_attach_run): Kill ${testpid} in one exit path.
Doing:
gdb --pid=PID -ex run
Results in GDB getting a SIGTTIN, and thus ending stopped. That's
usually indicative of a missing target_terminal_ours call.
E.g., from the PR:
$ sleep 1h & p=$!; sleep 0.1; gdb -batch sleep $p -ex run
[1] 28263
[1] Killed sleep 1h
[2]+ Stopped gdb -batch sleep $p -ex run
The workaround is doing:
gdb -ex "attach $PID" -ex "run"
instead of
gdb [-p] $PID -ex "run"
With the former, gdb waits for the attach command to complete before
moving on to the "run" command, because the interpreter is in sync
mode at this point, within execute_command. But for the latter,
attach_command is called directly from captured_main, and thus misses
that waiting. IOW, "run" is running before the attach continuation
has run, before the program stops and attach completes. The broken
terminal settings are just one symptom of that. Any command that
queries or requires input results in the same.
The fix is to wait in catch_command_errors (which is specific to
main.c nowadays), just like we wait in execute_command.
gdb/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* main.c: Include "infrun.h".
(catch_command_errors, catch_command_errors_const): Wait for the
foreground command to complete.
* top.c (maybe_wait_sync_command_done): New function, factored out
from ...
(maybe_wait_sync_command_done): ... here.
* top.h (maybe_wait_sync_command_done): New declaration.
gdb/testsuite/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
* gdb.base/attach.exp (test_command_line_attach_run): New
procedure.
(top level): Call it.
Several places in the testsuite have a copy of a snippet of code that
spawns a test program, waits a bit, and then does some PID munging for
Cygwin. This is in order to have GDB attach to the spawned program.
This refactors all that to a common procedure.
(multi-attach.exp wants to spawn multiple processes, so this makes the
new procedure's interface work with lists.)
Tested on x86_64 Fedora 20.
gdb/testsuite/ChangeLog:
2014-09-11 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (spawn_wait_for_attach): New procedure.
* gdb.base/attach.exp (do_attach_tests, do_call_attach_tests)
(do_command_attach_tests): Use spawn_wait_for_attach.
* gdb.base/solib-overlap.exp: Likewise.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2012-02-15 Pedro Alves <palves@redhat.com>
* remote.c (remote_detach_1, extended_remote_attach_1): Tweak
output to be like native targets'.
(remote_pid_to_str): Special case the null ptid.
gdb/testsuite/
2012-02-15 Pedro Alves <palves@redhat.com>
Support extended-remote. Avoid cascading timeouts.
* gdb.base/attach.exp (do_attach_tests): Add expected output for
the extended-remote target. If attaching with no file fails, load
the file manually.
* gdb.server/ext-attach.exp: Adjust expected attach/detach output.
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
PID for Cygwin. Add Cygwin specific strings to check for in some
tests.
(do_attach_tests): Add a test for user interaction when attaching
to a process with no matching symbol table already loaded.
* gdb.base/attach.exp, gdb.base/detach.exp, gdb.base/gcore.exp,
gdb.mi/mi-basics.exp, gdb.threads/gcore-thread.exp,
gdb.trace/save-trace.exp: Make sure that full pathnames are
escaped correctly.
* gdb.base/attach.exp: Fix logic error that was suppressing this
test for all non hppa*-*-hpux* targets, instead of the hp target.
Move comments closer to the suppression point. Also now need to
check that we are running natively.