* exceptions.c (struct catcher): Remove saved_uiout field.
(exceptions_state_mc_init): Remove the `func_uiout' parameter, and
no longer save/resvore the global ui_out builder.
(catch_exceptions_with_msg): Save/override/restore the global
ui_out builder manually instead of relying on TRY_CATCH to do it.
(catch_errors): Save/restore the global ui_out builder manually
instead of relying on TRY_CATCH to do it.
* exceptions.h (exceptions_state_mc_init): Remove the `func_uiout'
parameter.
(TRY_CATCH): Adjust.
* cli/cli-interp.c (safe_execute_command): Save/override/restore
the global ui_out builder manually instead of relying on TRY_CATCH
to do it.
gdb/ChangeLog:
From Stephen Kitt <steve@sk2.org>
* breakpoint.c, breakpoint.h, cli/cli-dump.c, dwarf2expr.c,
gdbarch.c, gdbarch.sh, remote.c: Various spelling fixes.
gdb/testsuite/ChangeLog:
From Stephen Kitt <steve@sk2.org>
* gdb.base/help.exp: Adjust following some spelling corrections
in GDB.
up the symbol.
(name_end): New function.
(keep_name_info): New function.
(decode_line_1): Use keep_name_info.
(decode_compound): Likewise.
* cli/cli-utils.h (remove_trailing_whitespace): New function.
* cli/cli-utils.c (remove_trailing_whitespace): Likewise.
PR c++/12273
* linespec.c (locate_first_half): Keep overload information, too.
(decode_compound): Use a string to represent break characters
to escape the loop.
If P points to a break character, do not increment it.
For C++ and Java, keep overload information and relevant keywords.
If we cannot find a symbol, search the minimal symbols.
PR c++/11734
* linespec.c (decode_compound): Rename SAVED_ARG to
THE_REAL_SAVED_ARG.
Make a copy of THE_REAL_SAVED_ARG in SAVED_ARG and strip
single-quotes.
Pass a valid block to lookup_symbol.
(lookup_prefix_sym): Likewise.
(find_method): Construct search name based on SYM_CLASS instead
of SAVED_ARG.
* psymtab.c (lookup_partial_symbol): Add language parameter.
(lookup_symbol_aux_psymtabs): Likewise.
Don't assume that the psymtab we found was the right one. Search
for the desired symbol in the symtab to be certain.
(psymtab_search_name): New function.
(lookup_partial_symbol): Use psymtab_search_name.
Add language parameter.
(read_symtabs_for_function): Add language parameter and pass to
lookup_partial_symbol.
(find_symbol_file_from_partial): Likewise.
* cli/cli-decode.h (CMD_LIST_AMBIGUOUS): Define.
* cli/cli-decode.c (lookup_cmd_1): Use CMD_LIST_AMBIGUOUS.
(lookup_cmd): Test for CMD_LIST_AMBIGUOUS.
* completer.c (complete_line_internal): Use CMD_LIST_AMBIGUOUS.
* top.c (set_verbose): Use CMD_LIST_AMBIGUOUS.
* value.c (value_from_history_ref): New function.
* value.h (value_from_history_ref): Export.
* cli/cli-utils.c (get_number_trailer): Use value_from_history_ref
to parse value history references.
* cli/cli-utils.h (get_number_trailer): Update comment.
2011-02-24 Michael Snyder <msnyder@vmware.com>
* gdb.base/break.exp: Add tests for delete breakpoints using
convenience variables and value history references.
* gdbthread.h (print_thread_info): Change prototype.
* thread.c (print_thread_info): Accept char* instead of int for
requested_threads argument. Use new function number_is_in_list
to determine which threads to list.
(info_threads_command): Pass char* to print_thread_info.
* cli/cli-utils.c (number_is_in_list): New function.
* cli/cli-utils.h (number_is_in_list): Export.
* mi/mi-main.c (mi_cmd_thread_info): Pass char* to
print_thread_info.
(print_one_inferior): Ditto.
(mi_cmd_list_thread_groups): Ditto.
2011-02-21 Michael Snyder <msnyder@vmware.com>
* gdb.threads/thread-find.exp: Update patterns for changes in
output of "info threads" command.
* command.h (enum command_class): New class 'no_set_class', for
"show" commands without a corresponding "set" command.
* value.c (_initialize_values): Use 'no_set_class' for "show values".
* copying.c (_initialize_copying): Ditto for "show copying" and
"show warranty".
* cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
"show version".
* cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
which there is no corresponding "set" command (eg. "show copying").
Redirect also uiout and stdtarg{,err} in execute_command_to_string.
* cli-logging.c (struct saved_output_files) <targerr>: New.
(set_logging_redirect, pop_output_files, handle_redirections):
Redirect also gdb_stdtargerr.
* defs.h (struct ui_out, make_cleanup_ui_out_redirect_pop): New
declarations.
* event-top.c (gdb_setup_readline, gdb_disable_readline): Redirect
also gdb_stdtargerr.
* top.c (execute_command_to_string): Move make_cleanup_ui_file_delete
to the top. Redirect also gdb_stdlog, gdb_stdtarg and gdb_stdtargerr.
Use ui_out_redirect, register make_cleanup_ui_out_redirect_pop.
* tui/tui-io.c (tui_setup_io): Redirect also gdb_stdtargerr.
* utils.c (do_ui_out_redirect_pop, make_cleanup_ui_out_redirect_pop):
New functions.
gdb/testsuite/
* gdb.python/python.exp (set height 0, collect help from uiout)
(verify help to uiout): New tests.
* breakpoint.c (save_breakpoints): Use RETURN_MASK_ALL.
* cli-out.c: Include vec.h.
(cli_field_fmt, cli_spaces, cli_text, cli_message, cli_flush): New
variable stream, initialize it, use it.
(cli_redirect): New function comment. Replace the stream and
original_stream fields by the new streams field. Remove the
original_stream != NULL conditional, assert error on NULL instead.
(out_field_fmt, field_separator): New variable stream, initialize it, use it.
(cli_out_data_ctor): Assert non-NULL stream. Replace the stream and
original_stream fields by the new streams field.
(cli_out_set_stream): Replace the stream field by the new streams
field.
* cli-out.h: Include vec.h.
(ui_filep): New typedef, call DEF_VEC_P for it.
(struct cli_ui_out_data): Replace the stream and original_stream
fields by the new streams field.
* cli/cli-logging.c (set_logging_redirect): Call ui_out_redirect with
NULL first. Extend the comment.
(handle_redirections): Call ui_out_redirect with output.
* python/py-breakpoint.c (bppy_get_commands): Move ui_out_redirect
calls outside of the TRY_CATCH block.
gdb/testsuite/
* gdb.base/ui-redirect.exp: New file.
* cli-logging.c: Include gdb_assert.h.
(set_logging_overwrite): New function.
(logging_redirect): New comment.
(logging_no_redirect_file, set_logging_redirect)
(pop_output_files) <logging_no_redirect_file>: New.
(handle_redirections) <!logging_redirect>: New variable
no_redirect_file. Remove file autoclose for tee_file_new. No longer
discard cleanup for the close of former OUTPUT. Set
LOGGING_NO_REDIRECT_FILE.
(handle_redirections) <logging_redirect>: gdb_assert
LOGGING_NO_REDIRECT_FILE.
(show_logging_command) <logging_redirect handling>: Adjust messages
for SAVED_FILENAME not NULL.
(_initialize_cli_logging): Install set_logging_overwrite and
set_logging_redirect.
* cli/cli-cmds.c: White space.
* cli/cli-decode.c: White space.
* cli/cli-dump.c: White space.
* cli/cli-interp.c: White space.
* cli/cli-logging.c: White space.
* cli/cli-script.c: White space.
* cli/cli-setshow.c: White space.
* cli/cli-decode.c (complete_on_cmdlist): Make two passes over the
command list.
gdb/testsuite
* gdb.base/completion.exp: Add tests for completion and deprecated
commands.
Pedro Alves <pedro@codesourcery.com>
* tracepoint.h (struct trace_status): New fields disconnected_tracing
and circular_buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing.
* tracepoint.c (trace_status_command): Display target's status for
disconnected tracing and circular buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing, add
query for non-disconnected-tracing case, remove the stop_tracing
call.
(tfile_open): Clear disconnected and circular buffer status.
(trace_save): Save disconnected and circular buffer status.
(parse_trace_status): Parse disconnected and circular buffer status,
also recognize disconnected as a stop reason.
* remote.c (remote_set_disconnected_tracing): Only set
QTDisconnected if the remote end supports disconnected tracing.
Warn otherwise, if trying to enable disconnected tracing.
* infcmd.c (detach_command): Update disconnect_tracing call.
* cli/cli-cmds.c (quit_command): Ditto.
* gdb.texinfo (Tracepoint Packets): Describe disconn and circular
trace status fields.
* cli/cli-script.c (process_next_line): Handle 'stepping'.
gdb/testsuite/
* gdb.trace/while-dyn.exp (executable): New variable.
(binfile): Use it.
(test_while_stepping): New function. Move most tests here. Call
it once for each of the while-stepping, stepping and ws aliases.
* defs.h (read_command_lines, read_command_lines_1): New
parameters validator and closure.
* tracepoint.h (struct action_line): Remove.
* breakpoint.h (struct breakpoint): Remove the 'actions'
field.
* defs.h (enum command_control_type): New value
while_stepping_control.
(struct command_line): Add comments.
* breakpoint.c (breakoint_is_tracepoint): New.
(breakpoint_set_commands): For tracepoints,
verify the commands are permissible.
(check_tracepoint_commands): New.
(commands_command): Require that each new line is validated using
check_tracepoint_command, if we set commands for a tracepoint.
(create_tracepoint_from_upload): Likewise.
(print_one_breakpoint_location): Remove the code to print
actions specifically.
(tracepoint_save_command): Relay to print_command_lines.
* cli/cli-script.c (process_next_line): New parameters validator
and closure. Handle 'while-stepping'. Call validator if not null.
(read_command_lines, read_command_lines1): Likewise.
(recurse_read_control_structure): New parameters validator and
closure. Handle while_stepping_control.
(print_command_lines): Handle while-stepping.
(get_command_line, define_command, document_command): Adjust.
* remote.c (remote_download_tracepoint): Adjust.
* tracepoint.c (make_cleanup_free_actions, read_actions)
(free_actions, do_free_actions_cleanup): Remove.
(trace_actions_command): Use read_command_lines.
(validate_actionline): Use error in one place.
(encode_actions_1): New, extracted from...
(encode_actions): ...this. Also use cleanups for exception
safety.
(trace_dump_command): Adjust.
* mi/mi-cmd-break (mi_cmd_break_commands): Validate commands if
it's tracepoint.
* infcmd.c (detach_command): Ask whether to stop tracing.
* cli/cli-cmds.c (quit_command): Ditto.
* breakpoint.h (struct breakpoint): New field number_on_target.
* breakpoint.c (create_tracepoint_from_upload): New function.
(get_tracepoint_by_number_on_target): New function.
* remote.c (struct remote): New field disconnected_tracing.
(remote_disconnected_tracing_feature): New function.
(remote_protocol_features): Add DisconnectedTracing.
(struct uploaded_tp): New struct.
(uploaded_tps): New global.
(get_uploaded_tp): New function.
(find_matching_tracepoint): New function.
(remote_get_tracing_state): New function.
(remote_start_remote): Call it.
* tracepoint.c (disconnected_tracing): New global.
(trace_start_command): Initialize number_on_target.
(stop_tracing): New function, split out from...
(trace_stop_command): Call stop_tracing.
(get_trace_status): New function, split out from...
(trace_status_command): Call get_trace_status, add info on
disconnection behavior.
(disconnect_or_stop_tracing): New function.
(finish_tfind_command): Translate from number on target.
(trace_find_tracepoint_command): Translate to number on target.
(send_disconnected_tracing_value): New function.
(set_disconnected_tracing): New function.
(_initialize_tracepoint): Add disconnected-tracing variable.
* NEWS: Mention disconnected tracing.
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
disconnected tracing.
(Tracepoint Packets): Document new protocol.
* defs.h (read_command_lines_1): Declare.
* cli/cli-script.c (read_next_line): Only return string,
do not process.
(process_next_line): New, extracted from read_next_line.
(recurse_read_control_structure): Take a function pointer to the
read function.
(get_command_line) Pass the read_next_line as reader function
into recurse_read_control_structure.
(read_command_lines_1): New, extracted from...
(read_command_lines): ...here.
* cli/cli-cmds.c (disassemble_command): Add a new modifier /r
to "disassemble" command to print the raw instructions in hex as
well as in symbolic form.
(init_cli_cmds): Ditto.
(print_disassembly): Change "mixed" to "flags" to translate
the behavior of disassemble.
(disassemble_current_function): Ditto.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
* stack.c (gdb_disassembly_stub): Ditto.
* disasm.c (do_mixed_source_and_assembly): Ditto.
(do_mixed_source_and_assembly): Ditto.
(do_assembly_only): Ditto.
(gdb_disassembly): Ditto.
(dump_insns): print the raw instructions in hex as well as in
symbolic form if DISASSEMBLY_RAW_INSN and flags is true.
* disasm.h (DISASSEMBLY_SOURCE): Include source code with the
assembly if it and flags is true.
(DISASSEMBLY_RAW_INSN): Include the raw instructions in hex with
the assembly if it and flags is true.
(gdb_disassembly): Update extern.
* NEWS: Document disassemble/r support.
Report error on inaccessible memory.
* cli/cli-dump.c: Include gdbcore.h.
(dump_memory_to_file): Call read_memory instead of target_read_memory.
gdb/testsuite/
* gdb.base/dump.exp (inaccessible memory is reported): New test.
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (linux_child_follow_fork): If we're staying attached
to the child process, enable event reporting on it. Don't handle
checkpoints here. Instead, add the child fork to the lwp thread
and inferior lists without clobbering the previous inferior. Let
the thread_db layer learn about a new child process, even if
following the parent.
(linux_nat_switch_fork): Delete lwps of the current inferior only,
instead of clearing the whole list. Use thread_change_ptid to
give the core the illusion the new checkpoint is still the same
inferior. Clear the register cache.
(linux_handle_extended_wait): Handle checkpoints here.
(linux_multi_process): Turn on.
* linux-fork.c (struct fork_info) <pc>: Remove field.
(init_fork_list): Do not delete the checkpoint from the inferior
list (it is not there).
(fork_load_infrun_state): Don't switch inferior_ptid here. Pass
the new checkpoint's ptid to linux_nat_switch_fork.
(fork_save_infrun_state): Make static. Don't stop the pc field of
fork_info, it's gone.
(linux_fork_mourn_inferior): Don't delete the checkpoint from the
inferior list, it's not there.
(linux_fork_detach): Ditto.
(delete_fork_command): Replace mention of fork/checkpoint by
checkpoint only.
(detach_fork_command): Likewise. Don't delete the checkpoint from
the inferior list.
(info_forks_command): Adjust.
(restore_detach_fork): Delete.
(checkpointing_pid): New.
(linux_fork_checkpointing_p): New.
(save_detach_fork): Delete.
(checkpoint_command): Delete temp_detach_fork. Don't remove
breakpoints, that's a nop. Store the pid of the process we're
checkpointing, and use make_cleanup_restore_integer to restore it.
Don't reinsert breakpoints here.
(process_command, fork_command): Delete.
(restart_command): Update comments to only mention checkpoints,
not forks.
(_initialize_linux_fork): Delete "fork", "process", "info forks"
commands.
* linux-fork.h (fork_save_infrun_state, fork_list): Delete
declarations.
(linux_fork_checkpointing_p): Declare.
* cli/cli-cmds.c (killlist): New.
* cli/cli-cmds.h (killlist): Declare.
* gdbcmd.h (killlist): Declare.
* inferior.c: Include "gdbthread.h".
(detach_inferior_command, kill_inferior_command)
(inferior_command): New.
(info_inferiors_command): Allow specifying a specific inferior id.
(_initialize_inferiors): Register "inferior", "kill inferior" and
"detach inferior" commands.
* infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
* gdbthread.h (any_thread_of_process): Declare.
* thread.c (any_thread_of_process): New.
* NEWS: Mention multi-inferior debugging. Mention 'info
inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
new commands.
(Removed commands): New section, mentioning that 'info forks',
'fork', 'process', 'delete fork' and 'detach fork' are now gone.
gdb/testsuite/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.base/multi-forks.exp: Only run detach-on-fork tests on
linux. Adjust to use "inferior", "info inferiors", "detach
inferior" and "kill inferior" instead of "restart", "info fork",
"detach fork" and "delete fork".
* gdb.base/ending-run.exp: Spell out "info".
* gdb.base/help.exp: Adjust to use test_prefix_command_help for
the "kill" command.
gdb/doc/
2009-07-02 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Debugging multiple inferiors): Document the
"inferior", "detach inferior" and "kill inferior" commands.
(Debugging Programs with Multiple Processes): Adjust to mention
generic "inferior" commands. Delete mention of "detach fork" and
"delete fork". Cross reference to "Debugging multiple inferiors"
section.
* printcmd.c (print_scalar_formatted): Always truncate
unsigned data types.
* cli-dump.c (struct callback_data): Change type of load_offset
to CORE_ADDR.
(restore_binary_file): Update type casts.
(restore_command): Parse load_offset as address, not long.
* utils.c (string_to_core_addr): Do not sign-extend value.
* varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
before comparing against requested frame address.
testsuite/ChangeLog:
* gdb.base/dump.exp: Handle SPU like 64-bit platforms.
Remove the PROT parameter from openp.
* source.c (openp): Remove the parameter PROT. Assertion check MODE.
defs.h (openp): Update the prototype.
Update all the openp callers.
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* cli/cli-decode.c (deprecated_add_set_cmd): Delete.
* command.h (deprecated_add_set_cmd): Delete declaration.
* gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
'set debug gnu-nat' and 'show debug gnu-nat'.
* i386-nat.c (_initialize_i386_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
* mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
gdb/doc/
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo: Document 'set/show debug gnu-nat'. Replace 'maint
show-debug-regs' docs by 'maint set show-debug-regs' and 'maint
show show-debug-regs' docs.
target_has_stack.
* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
when there is no thread selected.
(mi_cmd_execute): Don't special case commands that can run without
a valid selected thread.
* top.c (execute_command): Don't special case commands that can
run without a valid selected thread. Use has_stack_frames.
* infcmd.c (ensure_valid_thread): New.
(continue_1, step_1, jump_command, signal_command): Use it.
(detach_command): Error out if there's no selected thread/inferior.
* thread.c (print_thread_info): Allow having no thread selected.
(switch_to_thread): Don't read the PC if there is no current thread.
(do_restore_current_thread_cleanup): Don't record the current
frame if there is no current thread.
(make_cleanup_restore_current_thread): Don't read frame info if
there is no selected thread.
(_initialize_thread): Don't mark commands as
"no_selected_thread_ok".
* frame.c (get_current_frame): Error out if there is no valid
selected thread.
(has_stack_frames): Return false if there is no valid
selected thread.
* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
"no_selected_thread_ok".
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): Delete.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Delete declaration.
* stack.c (get_selected_block): Use has_stack_frames.
Silence a few -Wmissing-prototypes warnings.
PR build/9877:
* amd64-nat.c: Include "amd64-nat.h".
* fork-child.c (_initialize_fork_child): Ditto.
* gcore.c (_initialize_gcore): Ditto.
* inf-ptrace.c: Include "inf-ptrace.h".
(inf_ptrace_store_registers): Make it static.
* linux-nat.c (linux_nat_terminal_ours): Make it static.
(_initialize_linux_nat): Declare before definition.
* linux-tdep.c: Include "linux-tdep.h".
* linux-thread-db.c (_initialize_thread_db): Declare before
definition.
* proc-service.c (_initialize_proc_service): Ditto.
* remote.c (remote_send_printf): Make it static.
* solib.c: Include "solib.h".
* symfile-mem.c (_initialize_symfile_mem): Declare before
definition.
* ada-lang.c (ada_la_decode, ada_match_name)
(ada_suppress_symbol_printing, ada_is_array_type)
(ada_value_ptr_subscript, ada_array_length)
(ada_to_static_fixed_value): Make them static.
(_initialize_ada_language): Declare before definition.
* ada-tasks.c (ada_get_task_number, ada_get_environment_task)
(ada_task_list_changed, ada_new_objfile_observer): Make them
static.
(_initialize_tasks): Declare before definition.
* addrmap.c (_initialize_addrmap): Declare before definition.
* auxv.c (default_auxv_parse): Make it static.
* bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
them static.
* breakpoint.c (remove_sal): Add line break.
(expand_line_sal_maybe): Make it static.
* cp-name-parser.y: Include "cp-support.h".
* cp-valprint.c (cp_find_class_member): Make it static.
* eval.c (value_f90_subarray): Ditto.
* exceptions.c (print_any_exception): Ditto.
* findcmd.c (_initialize_mem_search): Declare before definition.
* frame.c (frame_observer_target_changed): Make it static.
* gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
* inf-child.c: Include "inf-child.h".
* inferior.h (valid_inferior_id): Rename to ...
(valid_gdb_inferior_id): ... this.
* infrun.c (infrun_thread_stop_requested, siginfo_make_value):
Make them static.
* jv-lang.c (java_language_arch_info): Make it static.
* m2-typeprint.c (m2_get_discrete_bounds): Ditto.
* osdata.c (info_osdata_command): Make it static.
* regcache.c (regcache_observer_target_changed): Make it static.
* reverse.c (_initialize_reverse): Declare before definition.
* stabsread.c (cleanup_undefined_types_noname)
(cleanup_undefined_types_1): Make them static.
* symfile.c (place_section): Make it static.
* symtab.c (find_pc_sect_psymtab_closer): Make it static.
* target-descriptions.c (_initialize_target_descriptions): Declare
before definition.
* target.c (default_get_ada_task_ptid, find_default_can_async_p)
(find_default_is_async_p, find_default_supports_non_stop): Make
them static.
(target_supports_non_stop): Add prototype.
(dummy_pid_to_str): Make it static.
* utils.c (_initialize_utils): Declare before definition.
* ada-exp.y (_initialize_ada_exp): Declare before definition.
* solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
* target.h (struct target_ops): Add a prototype to the
to_can_execute_reverse callback.
* macroscope.c (_initialize_macroscope): Declare before definition.
* cp-namespace.c (_initialize_cp_namespace): Declare before definition.
* python/python.c (_initialize_python): Declare before definition.
* tui/tui-command.c: Include "tui/tui-command.h".
* tui/tui-data.c (init_content_element, init_win_info): Make them
static.
* tui/tui-disasm.c: Include "tui/tui-disasm.h".
* tui/tui-interp.c (_initialize_tui_interp): Declare before
definition.
* tui/tui-layout.c: Include "tui/tui-layout.h".
(_initialize_tui_layout): Declare before definition.
* tui/tui-regs.c: Include "tui/tui-regs.h".
(tui_display_reg_element_at_line): Make it static.
(_initialize_tui_regs): Declare before definition.
* tui/tui-stack.c (_initialize_tui_stack): Declare before
definition.
* tui/tui-win.c: Include "tui/tui-win.h".
(_initialize_tui_win): Declare before definition.
(tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
* tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
(tui_get_cmd_list): Add a prototype.
* tui/tui-windata.c: Include tui-windata.h.
* tui/tui-wingeneral.c (box_win): Make it static.
* cli/cli-logging.c (show_logging_command): Make it static.
(_initialize_cli_logging): Declare before definition.
* mi/mi-common.c (_initialize_gdb_mi_common): Declare before
definition.
* cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
* cli/cli-setshow.c (do_setshow_command): Handle it.
* command.h (enum var_types): Add var_zuinteger.
(add_setshow_zuinteger_cmd): Declare.
* valprint.c (_initialize_valprint): Change the set input-radix
and set output-radix commands to zuinteger type.
2009-01-23 Pedro Alves <pedro@codesourcery.com>
* gdb.base/radix.exp: Add tests to ensure that that set
input-radix 0 and set output-radix 0 are really rejected.
attribute in GLIBC 2.8.
* cli/cli-cmds.c (pwd_command): Check return value from getcwd.
* inflow.c (check_syscall): New function.
(new_tty): Use check_syscall to check return values from open and dup.
* linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
* main.c (captured_main): Call cwd after setting up gdb_stderr;
check for errors from getcwd.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
* ui-file.c (stdio_file_write): Ignore return value from fwrite.
(stdio_file_fputs): Same.
* utils.c (internal_vproblem): abort if last-ditch error message
write fails.
PR cli/2563:
* cli/cli-decode.c (delete_cmd): Add hook-related out parameters.
(add_cmd): Update. Install hooks into new command.
(add_alias_cmd): Update.
gdb/testsuite
* gdb.base/commands.exp (redefine_hook_test): New proc.
Call it.
PR gdb/1815:
* cli/cli-decode.c (delete_cmd): Forward declare.
(delete_cmd): Now static. Change return type. Remove command
from alias chain. Rewrite.
(add_cmd): Initialize new fields. Update cmd_pointer on all
aliases.
(add_alias_cmd): Put command on alias chain.
* command.h (delete_cmd): Don't declare.
* cli/cli-decode.h (delete_cmd): Don't declare.
(struct cmd_list_element) <aliases, alias_chain>: New fields.
gdb/testsuite
* gdb.base/commands.exp (redefine_backtrace_test): New proc.
Call it.
* reggroups.c (maintenance_print_reggroups): Make a cleanup.
* regcache.c (regcache_print): Make a cleanup.
* maint.c (maintenance_print_architecture): Make a cleanup.
* dummy-frame.c (maintenance_print_dummy_frames): Make a cleanup.
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
(set_cmd_async_ok, get_cmd_async_ok): Declare.
* cli/cli-decode.c (set_cmd_async_ok): New function.
(get_cmd_async_ok): New function.
* cli/cli-cmds.c (init_cli_cmds): Mark "pwd", "help", "info", and
"show" as async-ok.
* top.c (execute_command): Use get_cmd_async_ok.
* infcmd.c: Include cli/cli-decode.h.
(_initialize_infcmd): Mark "interrupt" as async-ok.
* Makefile.in (infcmd.o): Depend on cli_decode_h.
* gdb/target.c (target_flash_erase): Do not return void value.
(target_flash_done): Likewise.
* gdb/cli/cli-cmds.c (source_command): Likewise.
Reported by timeless@gmail.com:
* wrapper.c (sim_target_parse_arg_array): Do not return void value.
(build_command_line): Require arguments only for if and while commands.
(get_command_line, execute_user_command, execute_control_command):
Fix wording of warning messages.
(print_command_lines): Print breakpoint commands.
(execute_control_command): Call commands_from_control_command to
handle the `commands' command inside a body of a flow-control command.
(read_next_line): Recognize the `commands' command and build a
command line structure for it.
(recurse_read_control_structure, read_command_lines): Handle
`commands' similarly to `if' and `while'.
* breakpoint.c (get_number_trailer): Document the special meaning
of NULL as the first argument PP.
(commands_from_control_command): New function.
* breakpoint.h (commands_from_control_command): Add prototype.
* defs.h (commands_control): New enumerated value for enum
command_control_type.
gdb/
* cli/cli-script.c (struct user_args): Add command field.
(arg_cleanup): Free command string.
(setup_user_args): Copy the command line before relying on it.
gdb/testsuite/
* gdb.base/commands.exp (recursive_source_test): New test.
* cli/cli-cmds.c: Include fcntl.h.
(source_command): Use the GDB search path to find script files.
doc/
* gdb.texinfo (Choosing files): Mention that -directory is used
for script files.
(Specifying source directories): Likewise.
(Command files): Explain how script files are found.
* jv-lang.c (get_java_utf8_name): Add cast.
(evaluate_subexp_java): Use gdb_byte for buffers.
* jv-valprint.c (java_value_print, java_value_print): Use gdb_byte
for buffers.
* scm-lang.c (scm_get_field, scm_unpack)
(scm_evaluate_string): Use gdb_byte for buffers.
(scm_lookup_name): Add cast.
* scm-valprint.c (scm_scmval_print, scm_scmval_print): Use
gdb_byte for buffers.
* tui/tui.h (tui_get_command_dimension): Make parameters unsigned.
* tui/tui.c (tui_get_command_dimension): Make parameters unsigned.
* value.h (check_field): Change "name" to a string.
* valops.c (check_field): Change "name" to a string.
* scm-lang.h (scm_parse): Use gdb_byte for buffers.
* source.c (get_current_source_symtab_and_line)
(set_current_source_symtab_and_line): Initialize all fields of sal
structures.
* cli/cli-cmds.c (list_command): Use gdb_byte for buffers.
* command.h (add_setshow_integer_cmd): Make VAR an integer.
* cli/cli-decode.c (add_setshow_integer_cmd): Update to match.
* valops.c (value_string): Add a cast.
* eval.c (evaluate_subexp_standard): Use gdb_byte for byte buffers.
* breakpoint.c (re_enable_breakpoints_in_shlibs): Use gdb_byte for
byte buffers.
* target.h (struct target_ops): For to_insert_hw_breakpoint and
to_remove_hw_breakpoint use gdb_byte for byte buffer parameters.
* breakpoint.h (struct bp_location): Make shadow_contents a
gdb_byte buffer.
* cli/cli-setshow.c (do_setshow_command): Fix cast.
* cli/cli-dump.c (restore_section_callback)
(restore_binary_file): Use gdb_byte for byte buffers.
* proc-service.c (ps_ptwrite, ps_ptread, ps_pdwrite): Fix casts.
(ps_xfer_memory): Use gdb_byte for byte buffers.
* tracepoint.c (mem2hex): Use gdb_byte for byte buffers, and char
for string buffers.
* ser-tcp.c (net_open): Make len a socklen_t.
* go32-nat.c: Include top.h. Update copyright years.
(init_go32_ops): Override the default value of gdbinit[] with
"gdb.ini".
* cli/cli-cmds.c (init_cli_cmds): Use gdbinit[] instead of a
compile-time literal string GDBINIT_FILENAME.
* top.c (PATH_MAX): Define if not defined.
(gdbinit): Declare with a constant size PATH_MAX.
* config/i386/go32.mh (XM_FILE): Remove.
* config/i386/xm-go32.h: Remove file.
* remote.c (remote_open_1): Move "ex"'s declaration to where it is
used.
(remote_get_thread_local_address): Use throw_error, include a
printed string.
* linux-thread-db.c (thread_db_get_thread_local_address): Ditto.
* dwarf2loc.c (dwarf_expr_tls_address): Ditto.
* cli/cli-script.c (script_from_file): Mark up throw_error message.
* linespec.c (symtab_from_filename, decode_variable): Ditto.
HAVE_WORKING_FORK.
* cli/cli-cmds.c (shell_escape): Guard call to vfork with
HAVE_WORKING_VFORK and HAVE_WORKING_FORK.
* remote-fileo.c (remote_fileio_mode_to_host): Accomodate lack of
S_IRGRP and related macros.
(remote_fileio_mode_to_target): Likewise.
Replace string variables with a filename completer with
add_setshow_optional_filename_cmd.
* solib.c, symfile.c: Update.
* cli/cli-setshow.c: Do not tidle expand the file.
