The undefined function symbols (with non-zero value) on global entry
stubs are discarded by objdump when disassembling, so give objdump
another symbol to mark the stubs.
Also fixes a couple of bugs:
- entry_section was set to .opd for ELFv2, which meant a hard error
rather than a warning when _start wasn't defined.
- global entry stubs were not built if they were the only type of
stub in an executable.
bfd/
* elf64-ppc.c (ppc_stub_type): Add ppc_stub_global_entry.
(struct ppc_link_hash_table): Increase size of stub_count array.
(build_global_entry_stubs): Emit symbol on global entry stub.
(ppc64_elf_build_stubs): NULL check htab->brlt. Add global entry
stub stats.
ld/
* emultempl/ppc64elf.em (stub_added): Delete.
(gld${EMULATION_NAME}_finish): Call ppc64_elf_build_stubs even when
none of the usual stubs have been added. Only change entry_section
for ELFv1.
Makes the ld srec tests pass. Uses a horrible scan through symbols to
find ELF fields for symbol definitions, but the generic linker doesn't
offer anything better. Might be slow. Anyway, sane people will link
to ELF output then objcopy to convert formats.
* elf64-ppc.c (abiversion, set_abiversion): Move earlier.
(ppc64_elf_branch_reloc): Adjust addend for ELFv2 local offset.
(ppc64_elf_set_toc): Set ".TOC." symbol value when using
generic linker.
(ppc64_elf_relocate_section): Disable ELFv2 function entry
optimisation when --traditional-format.
There are legitimate reasons to allow a signed value in a cmpli insn
field, for example to test for a "stw r1,lock@sdarel(r13)" instruction
in user code, a kernel might use
subis r3,r3,STW_R1_0R13@ha # subtract off high part
cmplwi r3,lock@sdarel # is low part accessing lock?
Since the lock@sdarel may take a range of -32768 to 32767,
the allowed range of cmpli immediate must be at least [-32768,65535].
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Treat field of cmpli
insn as a bitfield; Use complain_overflow_bitfield.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
opcodes/
* ppc-opc.c (UISIGNOPT): Define and use with cmpli.
gas/
* config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
in 64-bit mode.
gold/
* powerpc.cc (relocate): Treat field of cmpli insn as a bitfield.
Power8 fuses addis,addi and addis,ld sequences when the target of the
addis is the same as the addi/ld. Thus
addis r12,r2,xxx@ha
addi r12,r12,xxx@l / ld r12,xxx@l(r12)
is faster than
addis r11,r2,xxx@ha
addi r12,r11,xxx@l / ld r12,xxx@l(r11)
So use the form that allows fusion in plt call and branch stubs.
bfd/
* elf64-ppc.c (ADDIS_R12_R2): Define.
(build_plt_stub): Support fusion on ELFv2 stub.
(ppc_build_one_stub): Likewise for plt branch stubs.
gold/
* powerpc.cc (addis_12_2): Define.
(Stub_table::do_write): Support fusion on ELFv2 stubs.
ld/testsuite/
* ld-powerpc/elfv2exe.d: Update for changed plt call stubs.
gdb/
* ppc64-tdep.c (ppc64_standard_linkage8): New.
(ppc64_skip_trampoline_code): Recognise ELFv2 stub supporting fusion.
ELFv2 needs to create plt entries in a non-PIC executable for an
address reference to a function defined in a shared object. It's
possible that an object file has no features that distinguish it as
ELFv1 or ELFv2, eg. an object only containing data. Such files need
to be handled like those that are known to be ELFv2.
However, this unnecessarily creates plt entries for the analogous
ELFv1 case, so arrange to set output abi version earlier, and use the
output abi version to further distinguish ambiguous input files.
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Account for possibly
needed plt entries when taking the address of functions for
abiversion == 0 (ie. unknown) as well as abiversion == 2.
Move opd setup and abiversion checks to..
(ppc64_elf_before_check_relocs): ..here. Renamed from
ppc64_elf_process_dot_syms. Set output abiversion from input and
input abiversion from output, if either is not set.
(ppc64_elf_merge_private_bfd_data): Don't merge flags here.
(elf_backend_check_directives): Update.
ld/testsuite/
* ld-powerpc/startv1.s, * ld-powerpc/startv2.s, * ld-powerpc/funref.s,
* ld-powerpc/funv1.s, * ld-powerpc/funv2.s,
* ld-powerpc/ambiguousv1.d, * ld-powerpc/ambiguousv2.d: New test files.
* ld-powerpc/powerpc.exp: Run new tests.
R_PPC64_ADDR16 is used in three contexts:
- .short data relocation
- 16-bit signed insn fields, eg. addi
- 16-bit unsigned insn fields, eg. ori
In the first case we want to allow both signed and unsigned 16-bit
values, the latter two ought to error if the field exceeds the range
of values allowed for 16-bit signed and unsigned integers
respectively. These conflicting requirements meant that ld had to
choose the least restrictive overflow checks, and thus it is possible
to construct testcases where an addi field overflows but is not
reported by ld. Many relocations dealing with 16-bit insn fields have
this problem. What's more, some relocations that are only ever used
for signed fields of instructions woodenly copied the lax overflow
checking of R_PPC64_ADDR16.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Use complain_overflow_signed
for R_PPC64_ADDR14, R_PPC64_ADDR14_BRTAKEN, R_PPC64_ADDR14_BRNTAKEN,
R_PPC64_SECTOFF, R_PPC64_ADDR16_DS, R_PPC64_SECTOFF_DS,
R_PPC64_REL16 entries. Use complain_overflow_dont for R_PPC64_TOC.
(ppc64_elf_relocate_section): Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value.
gold/
* powerpc.cc (Powerpc_relocate_functions::Overflow_check): Add
CHECK_UNSIGNED, CHECK_LOW_INSN, CHECK_HIGH_INSN.
(Powerpc_relocate_functions::has_overflow_unsigned): New function.
(Powerpc_relocate_functions::has_overflow_bitfield,
overflowed): Use the above.
(Target_powerpc::Relocate::relocate): Correct overflow checking
for a number of relocations. Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value.
This adds support for "func@localentry", an expression that returns the
ELFv2 local entry point address of function "func". I've excluded
dynamic relocation support because that obviously would require glibc
changes.
include/elf/
* ppc64.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_ADDR64_LOCAL entry.
(ppc64_elf_reloc_type_lookup): Support R_PPC64_ADDR64_LOCAL.
(ppc64_elf_check_relocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* Add BFD_RELOC_PPC64_ADDR64_LOCAL.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
(md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
ld/testsuite/
* ld-powerpc/elfv2-2a.s, ld-powerpc/elfv2-2b.s: New files.
* ld-powerpc/elfv2-2exe.d, ld-powerpc/elfv2-2so.d: New files.
* ld-powerpc/powerpc.exp: Run new test.
elfcpp/
* powerpc.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::local, global): Support
R_PPC64_ADDR64_LOCAL.
(Target_powerpc::Relocate::relocate): Likewise.
This patch allows the user to override powerpc64-ld's default for
providing linker generated register save and restore functions as used
by gcc -Os code. Normally these are not provided by ld -r, so Linux
kernel modules have needed to include their own copies.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add save_restore_funcs.
* elf64-ppc.c (ppc64_elf_func_desc_adjust): Use it to control
provision of out-of-line register save/restore routines.
ld/
* emultempl/ppc64elf.em (params): Init new field.
(ppc_create_output_section_statements): Set params.save_restore_funcs
default.
(PARSE_AND_LIST_*): Add support for --save-restore-funcs and
--no-save-restore-funcs.
Moves assorted variables used to communicate between ld and bfd into
a struct, hooks it into the bfd link_hash_table early, and removes
all other places where such variables were passed piecemeal.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Define.
(ppc64_elf_init_stub_bfd, ppc64_elf_edit_opd, ppc64_elf_tls_setup,
ppc64_elf_setup_section_lists, ppc64_elf_size_stubs,
ppc64_elf_build_stubs): Update prototype.
* elf64-ppp.c (struct ppc_link_hash_table): Add params, delete other
fields now in params. Adjust code throughout file.
(ppc64_elf_init_stub_bfd): Delete "abfd" parameter, add "params".
Save params pointer in htab.
(ppc64_elf_edit_opd, ppc64_elf_tls_setup,
ppc64_elf_setup_section_lists, ppc64_elf_size_stubs,
ppc64_elf_build_stubs): Remove parameters now in "params".
ld/
* emultemps/ppc64elf.em (params): New static struct replacing
various other static vars. Adjust code throughout file.
For powerpc64 as HJ did earlier for other ELF targets, and a tidy.
PR gold/15530
* elf64-ppc.c (ppc64_elf_gc_mark_dynamic_ref): Support
--export-dynamic and --dynamic-list marking of symbols.
* elflink.c (bfd_elf_gc_mark_dynamic_ref_symbol): Reorder
cheap tests first.
bfd/
2014-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
* coff-rs6000.c (xcoff_write_archive_contents_big): Free OFFSETS in
return paths. Three times.
* elf64-ppc.c (ppc64_elf_link_hash_table_create): Free HTAB in all
return paths.
(ppc64_elf_tls_optimize): Free TOC_REF in return path.
(ppc64_elf_edit_toc): Free USED in return path.
ELFv2 needs fewer relocs to annotate plt call stubs. I correctly
allocated a smaller buffer and wrote the proper relocs, but stupidly
bumped the reloc count as for ELFv1.
* elf64-ppc.c (ppc_build_one_stub): Correct reloc count passed
to get_relocs for ELFv2.
I don't know what I was thinking here to omit the save of r2.
Possibly I was looking at -msave-toc-indirect code at the time, where
r2 is saved in the function prologue.
* elf64-ppc.c (ppc_build_one_stub <ppc_stub_plt_branch_r2off>):
Don't omit saving of r2 for ELFv2. Don't addi 2,2,0.
(ppc_size_one_stub <ppc_stub_plt_branch_r2off>): Adjust to suit.
With -mcmodel=medium we can't assume that a -R object doesn't use
toc-relative addressing if there's no toc. Lots of things are
accessed via r2, not just the toc/got section. Also, testing for
.opd is plain wrong for ELFv2.
* elf64-ppc.c (ppc64_elf_link_just_syms): Remove .got check.
Handle ELFv2.
Some places in elf64-ppc.c carelessly used SYMBOL_CALLS_LOCAL when
the proper test is SYMBOL_REFERENCES_LOCAL for cases where we take the
address of a protected symbol. This works OK for function descriptors
but not for ELFv2. Setting symbols to their global entry stub a
little earlier is to ensure _bfd_elf_hash_symbol allows such symbols
in .gnu.hash.
* elf64-ppc.c (ppc64_elf_edit_toc): Use SYMBOL_REFERENCES_LOCAL
here, not SYMBOL_CALLS_LOCAL.
(ppc64_elf_relocate_section): Likewise.
(size_global_entry_stubs): Set undefined symbols on their global
entry stubs here..
(build_global_entry_stubs): ..rather than here.
(ppc64_elf_build_stubs): Don't reset glink->size before calling
build_global_entry_stubs.
I can't see any good reason why anyone would want a dynamic .TOC., so
hide it in a way that is respected by _bfd_elf_export_symbol. This
also fixes an abort in relocate_section on not finding sreloc for .TOC.
* elf64-ppc.c (ppc64_elf_func_desc_adjust): Make .TOC. defined and
hidden.
(ppc64_elf_set_toc): Adjust.
These shortcuts to dynamic sections in ppc_link_hash_table predated
their geneneric elf hash table equivalents.
* elf64-ppc.c (struct ppc_link_hash_table): Remove got, plt, relplt,
iplt, reliplt. Update all references to use elf.sgot, elf.splt,
elf.srelplt, elf.iplt and elf.irelplt.
Changing addis r2,r12,..; addi r2,r2,.. to lis r2,..; addi r2,r2..
in non-PIC executables has the benefit of removing a dependency on r12.
bfd/
* elf64-ppc.c (ppc64_elf_relocate_section): Edit global entry
prologue to non-PIC in non-PIC executables.
ld/testsuite/
* ld-powerpc/elfv2exe.d: Adjust for non-PIC global entry.
In a non-pic executable, ELFv2 like other targets, needs to emit a plt
entry even for non-call references to functions defined in shared
libraries, and define the function on the plt code.
* elf64-ppc.c (ppc64_elf_copy_indirect_symbol): Copy
pointer_equality_needed flag.
(ppc64_elf_check_relocs): For ELFv2 arrange to emit plt
entries for references to functions in shared libraries on
non-call relocs.
(readonly_dynrelocs): Split into function of the same name and..
(maybe_set_textrel): ..this new function. Update call.
(ppc64_elf_adjust_dynamic_symbol): Don't emit dynrelocs for
ELFv2 in most cases if we have a plt entry. Use new
readonly_relocs.
(allocate_dynrelocs): For ELFv2, don't allocate dynreloc space
for ifunc in static executables.
(size_global_entry_stubs): New function.
(ppc64_elf_size_dynamic_sections): Call size_global_entry_stubs.
Save end of glink branch table.
(ppc64_elf_hash_symbol): New function.
(build_global_entry_stubs): New function.
(ppc64_elf_build_stubs): Call build_global_entry_stubs. Adjust
glink sizing.
(ppc64_elf_relocate_section): Tidy plt16/32/64 reloc code.
(ppc64_elf_finish_dynamic_symbol): For ELFv2, adjust symbols
defined on plt code.
Every function has a nominal toc pointer value, even if it isn't used,
so set toc_off for every code section to the value used in that object
file. The thinking here was that if a code section didn't use the toc
it could use the previous object file's toc pointer value. It can,
but doing so is only a gain if functions in that section are called
mostly from previous objects sharing the same toc. We lose if the
functions in question are called mostly from the current object or
following objects, and it's a good bet they will probably mostly be
called from the current object.
* elf64-ppc.c (ppc64_elf_next_input_section): Always set toc_off
to value for object file.
This removes the DT_PPC_TLSOPT/DT_PPC64_TLSOPT dynamic tag and replaces
it with DT_PPC_OPT/DT_PPC64_OPT tag to provide the same functionality
and more. This isn't backwards compatible, but the TLSOPT tag hasn't
been used since the tls optimisation support was never submitted to
glibc.
/include/elf/
* ppc.h (DT_PPC_TLSOPT): Delete.
(DT_PPC_OPT, PPC_OPT_TLS): Define.
* ppc64.h (DT_PPC64_TLSOPT): Delete.
(DT_PPC64_OPT, PPC64_OPT_TLS, PPC64_OPT_MULTI_TOC): Define.
bfd/
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Use new DT_PPC_OPT
tag to specify tls optimisation.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_finish_dynamic_sections): Specify whether multiple
toc pointers are used via DT_PPC64_OPT.
binutils/
* readelf.c (get_ppc_dynamic_type): Replace PPC_TLSOPT with PPC_OPT.
(get_ppc64_dynamic_type): Replace PPC64_TLSOPT with PPC64_OPT.
The toc pointer save slot changes on ELFv2 from 40(1) to 24(1).
* elf64-ppc.c (STK_LR, STK_TOC, STK_LINKER): Define.
(savegpr0_tail, restgpr0_tail, savefpr0_tail, restfpr0_tail)
build_plt_stub, build_tls_get_addr_stub, ppc_build_one_stub,
ppc64_elf_relocate_section): Use new defines.
An ELFv2 PLT entry is simply the address of the target function rather
than three (or two) words to specify entry, toc and static chain. PLT
call stubs are correspondingly simpler and need no thread safety
barrier. The glink resolver stub and branch table also is simplified,
a change that could be applied to ELFv1 too, but isn't as yet.
* elf64-ppc.c (PLT_ENTRY_SIZE, PLT_INITIAL_ENTRY_SIZE): Add htab
parameter and adjust for ELFv2. Update all uses.
(PLT_CALL_STUB_SIZE): Delete.
(ppc64_elf_get_synthetic_symtab): Support new glink layout.
(allocate_dynrelocs): Likewise.
(plt_stub_size, build_plt_stub): Adjust for ELFv2.
(get_r2off): Return 0 for ELFv2 -R.
(ppc_build_one_stub, ppc_size_one_stub): Adjust for ELFv2.
(ppc64_elf_size_stubs): Likewise.
(ppc64_elf_build_stubs): Add new ELFv2 glink.
This defines the ELF symbol st_other field used to encode the number
of instructions between a function "global entry" and its "local entry",
and adds support related to the local entry offset.
include/elf/
* ppc64.h (STO_PPC64_LOCAL_BIT, STO_PPC64_LOCAL_MASK): Define.
(ppc64_decode_local_entry, ppc64_encode_local_entry): New functions.
(PPC64_LOCAL_ENTRY_OFFSET, PPC64_SET_LOCAL_ENTRY_OFFSET): Define.
bfd/
* elf64-ppc.c (struct ppc_stub_hash_entry): Add "other".
(stub_hash_newfunc): Init new ppc_stub_hash_entry field, and one
we forgot, "plt_ent".
(ppc64_elf_add_symbol_hook): Check ELFv1 objects don't have
st_other bits only valid in ELFv2.
(ppc64_elf_merge_symbol_attribute): New function.
(ppc_type_of_stub): Add local_off param to test branch range.
(ppc_build_one_stub): Adjust destinations for ELFv2 locals.
(ppc_size_one_stub, toc_adjusting_stub_needed): Similarly.
(ppc64_elf_size_stubs): Pass local_off to ppc_type_of_stub.
Set "other" field.
(ppc64_elf_relocate_section): Adjust destination for ELFv2 local
calls.
gas/
* config/tc-ppc.c (md_pseudo_table): Add .localentry.
(ppc_elf_localentry): New function.
(ppc_force_relocation): Force relocs on all branches to localenty
symbols.
(ppc_fix_adjustable): Don't reduce such symbols to section+offset.
binutils/
* readelf.c (get_ppc64_symbol_other): New function.
(get_symbol_other): Use it for EM_PPC64.
Defines bits in ELF e_flags to differentiate ELFv2 objects from ELFv2,
adds .abiversion directive to explicitly choose the ABI, and code to
check and automatically select ABI.
include/elf/
* ppc64.h (EF_PPC64_ABI): Define.
bfd/
* elf64-ppc.c (abiversion, set_abiversion): New functions.
(ppc64_elf_get_synthetic_symtab): Handle ELFv2 objects without .opd.
(struct ppc_link_hash_table): Add opd_abi.
(ppc64_elf_check_relocs): Check no .opd with ELFv2.
(ppc64_elf_merge_private_bfd_data): New function.
(ppc64_elf_print_private_bfd_data): New function.
(ppc64_elf_tls_setup): Set htab->opd_abi.
(ppc64_elf_size_dynamic_sections): Don't emit OPD related dynamic
tags for ELFv2.
(ppc_build_one_stub): Use R_PPC64_IRELATIVE for ELFv2 ifunc.
(ppc64_elf_finish_dynamic_symbol): Likewise
binutils/
* readelf.c (get_machine_flags): Display ABI version for EM_PPC64.
gas/
* config/tc-ppc.c: Include elf/ppc64.h.
(ppc_abiversion): New variable.
(md_pseudo_table): Add .abiversion.
(ppc_elf_abiversion, ppc_elf_end): New functions.
* config/tc-ppc.h (md_end): Define.
This change is to support the new ELFv2 ABI, which uses the value in
r12 on function entry to calculate the got/toc pointer.
bfd/
* elf64-ppc.c (build_plt_stub): Switch stubs to use r11 as base
reg and r12 as destination.
(ppc_build_one_stub): Likewise.
(ppc64_elf_build_stubs): Likewise for glink.
ld/testsuite/
* ld-powerpc/tls.s: Add proper .opd entry for _start.
* ld-powerpc/tlstoc.s: Likewise.
* ld-powerpc/relbrlt.d: Update for changed stubs.
* ld-powerpc/tls.d: Update for changed stubs and _start .opd entry.
* ld-powerpc/tls.g: Likewise.
* ld-powerpc/tlsexe.d: Likewise.
* ld-powerpc/tlsexe.g: Likewise.
* ld-powerpc/tlsexe.r: Likewise.
* ld-powerpc/tlsexetoc.d: Likewise.
* ld-powerpc/tlsexetoc.g: Likewise.
* ld-powerpc/tlsexetoc.r: Likewise.
* ld-powerpc/tlsso.d: Likewise.
* ld-powerpc/tlsso.g: Likewise.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlstoc.d: Likewise.
* ld-powerpc/tlstoc.g: Likewise.
* ld-powerpc/tlstocso.d: Likewise.
* ld-powerpc/tlstocso.g: Likewise.
* ld-powerpc/tlstocso.r: Likewise.
This changes the behaviour of @h and @ha on PowerPC64 to report errors
on 32-bit overflow. The motivation for this change is that on
PowerPC64, most uses of @h and @ha modifiers and their corresponding
relocations are to build up 32-bit offsets. We'd like to know when
such offsets overflow. Only rarely do people use @h or @ha with the
high 32-bit modifiers to build a 64-bit constant. Those uses will now
need to use two new modifiers, @high and @higha, if the constant isn't
known at assembly time. For now, we won't report overflow at assembly
time..
This also fixes an error when applying some of the HIGHER and HIGHEST
relocations.
include/elf/
* ppc64.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): New.
(IS_PPC64_TLS_RELOC): Match new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_ADDR16_HIGH, BFD_RELOC_PPC64_ADDR16_HIGHA,
BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA,
BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA): New.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entries for new relocs.
Make all _HA and _HI relocs report signed overflow.
(ppc64_elf_reloc_type_lookup): Handle new relocs.
(must_be_dyn_reloc, ppc64_elf_check_relocs): Likewise.
(dec_dynrel_count, ppc64_elf_relocate_section): Likewise.
(ppc64_elf_relocate_section): Don't apply 0x8000 adjust to
R_PPC64_TPREL16_HIGHER, R_PPC64_TPREL16_HIGHEST,
R_PPC64_DTPREL16_HIGHER, and R_PPC64_DTPREL16_HIGHEST.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (SEX16): Don't mask.
(REPORT_OVERFLOW_HI): Define as zero.
(ppc_elf_suffix): Support @high, @higha, @dtprel@high, @dtprel@higha,
@tprel@high, and @tprel@higha modifiers.
(md_assemble): Ignore X_unsigned when applying 16-bit insn fields.
Add (disabled) code to check @h and @ha reloc overflow for powerpc64.
Handle new relocs.
(md_apply_fix): Similarly.
elfcpp/
* powerpc.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::check_non_pic): Handle new relocs.
(Target_powerpc::Scan::global, local): Likewise.
(Target_powerpc::Relocate::relocate): Likewise. Check for overflow
on all ppc64 @h and @ha relocs.
* elf64-ppc.c (struct ppc_stub_hash_entry): Delete "addend".
(ppc64_elf_size_stubs): Don't set "addend".
(ppc64_elf_relocate_section): Don't allow calls via
toc-adjusting stubs without a following nop even in an
executable, except for self-calls and both libc_start_main
and .libc_start_main.
gold/
* powerpc.cc (Target_powerpc::Relocate::relocate): Update self-call
comment.
* elf64-ppc.c (ppc64_elf_relocate_section): Set "relocation" for
.TOC. after relocatable check.
gas/
* config/tc-ppc.c (ppc_elf_adjust_symtab): Don't make .TOC. weak.
* elf64-ppc.h (ppc64_elf_toc): Delete.
(ppc64_elf_set_toc): Declare.
* elf64-ppc.c (ppc64_elf_toc_reloc): Replace call to ppc64_elf_toc
with call the ppc64_elf_set_toc.
(ppc64_elf_toc_ha_reloc, ppc64_elf_toc64_reloc): Likewise.
(ppc64_elf_start_multitoc_partition): Likewise.
(struct ppc_link_hash_table): Delete dot_toc_dot. Replace all uses
with elf.hgot.
(ppc64_elf_process_dot_syms): Don't make a fake function descriptor
for ".TOC.".
(ppc64_elf_check_relocs): Mark sections with a reference to .TOC.
as needing a toc pointer.
(ppc64_elf_size_stubs): Don't set dot_toc_dot here.
(ppc64_elf_set_toc): Rename from ppc64_elf_toc. Add info param.
Set elf.hgot value.
ld/
* emultempl/ppc64elf.em: (ppc_layout_sections_again): Call
ppc64_elf_set_toc rather than ppc64_elf_toc/_bfd_set_gp_value.
(gld${EMULATION_NAME}_after_allocation): Likewise.
(ppc64_elf_check_relocs): Separate dynrel counts for local syms
into ifunc and non-ifunc.
(dec_dynrel_count): Pass in sym rather than sym_sec. Handle
separate ifunc/non-ifunc dynrel counts.
(allocate_got): Always use reliplt for ifunc.
(allocate_dynrelocs): Likewise.
(ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_layout_multitoc): Likewise.
(ppc64_elf_relocate_section): Likewise.
"relocation" in error messages throughout file.
(ppc64_elf_relocate_section): Remove sibling call error message,
replace with "call lacks nop". Specially report errors for
branches to function entry points via OPD lookup and branches
to stubs. Remove NULL symbol handling now done by %T.
* elf.c (elf_find_function): Cache last function sym info.
(_bfd_elf_maybe_function_sym): Return function size, pass in
section of interest.
* elf-bfd.h (struct elf_backend_data <maybe_function_sym>): Likewise.
(_bfd_elf_maybe_function_sym): Likewise.
* elf64-ppc.c (ppc64_elf_maybe_function_sym): Likewise.
(opd_entry_value): Add in_code_sec param. Revert caching code.
Return -1 if in_code_sec and function found in wrong section.
Update all calls.
* elf64-ppc.c (ppc64_elf_size_stubs): Round up glink_eh_frame
size to output section alignment.
(ppc64_elf_build_stubs): Likewise, and extend last FDE to cover.
bfd_get_section_lma, bfd_get_section_alignment,
bfd_get_section_flags, bfd_get_section_userdata): Rewrite macros
in order to use the `bfd' argument.
* bfd-in2.h: Regenerate.
* elf-vxworks.c (elf_vxworks_finish_dynamic_entry): Pass proper `bfd'
as the first argument for `bfd_get_section_alignment'.
* elf32-arm.c (create_ifunc_sections): Likewise, for
`bfd_set_section_alignment'.
* elf32-m32r.c (m32r_elf_relocate_section): Likewise, for
`bfd_get_section_name'.
* elf32-microblaze.c (microblaze_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relocate_section): Likewise.
* elf64-mmix.c (mmix_final_link_relocate): Likewise, for
`bfd_get_section_vma'.
* elf64-ppc.c (create_linkage_sections): Likewise, for
`bfd_set_section_alignment'.
* emultempl/m68hc1xelf.em (hook_in_stub): Pass proper `bfd'
as the first argument for `bfd_get_section_name'.
* config/tc-alpha.c (maybe_set_gp): Pass proper `bfd'
as the first argument for `bfd_get_section_vma'.
* elf64-ppc.c: Define more insns used in plt call stubs.
(ppc64_elf_brtaken_reloc): Assume isa version 2 or above.
(ppc64_elf_relocate_section): Likewise.
(enum ppc_stub_type): Add ppc_stub_plt_call_r2save.
(struct ppc_link_hash_table): Increase size of stub_count array.
Add plt_stub_align and plt_thread_safe.
(ALWAYS_USE_FAKE_DEP, ALWAYS_EMIT_R2SAVE): Define.
(plt_stub_size, plt_stub_pad): New functions.
(build_plt_stub): Emit barriers for power7 thread safety. Don't
emit needless save of r2.
(build_tls_get_addr_stub): Adjust params.
(ppc_build_one_stub): Handle ppc_stub_plt_call_r2save and aligning
plt stubs. Adjust build_*plt_stub calls.
(ppc_size_one_stub): Similarly.
(ppc64_elf_size_stubs): Accept plt_thread_safe and plt_stub_align
params. Choose default for plt_thread_safe based on existence of
calls to thread creation functions. Modify plt_call to
plt_call_r2save when no tocsave reloc found. Align tail of stub
sections.
(ppc64_elf_build_stubs): Align tail of stub sections. Adjust
output of stub statistics.
(ppc64_elf_relocate_section): Handle ppc_stub_plt_call_r2save.
* elf64-ppc.h (ppc64_elf_size_stubs): Update prototype.
ld/
* emultempl/ppc64elf.em (PARSE_AND_LIST_PROLOGUE,
PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --{no-,}plt-thread-safe and
--{no-,}plt-align.
(plt_thread_safe, plt_stub_align): New vars.
(gld${EMULATION_NAME}_after_allocation): Pass them to
ppc64_elf_size_stubs. Align stub sections according to plt_stub_align.
* ld.texinfo: Document new command line options, and an old
undocumented option.
* elf64-ppc.c (struct ppc64_elf_obj_tdata): Rename
ha_relocs_not_using_r2 to unexpected_toc_insn.
(ok_lo_toc_insn): New function.
(ppc64_elf_edit_toc): Check insn on lo toc reloc. Emit warning.
(ppc64_elf_relocate_section): Don't check insn on lo toc reloc here.
Handle addic on lo toc reloc.
ld/testsuite/
* ld-powerpc/powerpc.exp: Expect ld warnings for tocopt test.
* ld-powerpc/tocopt.out: New file.
bfd/
* elf64-ppc.c (struct ppc64_elf_obj_tdata): Add ha_relocs_not_using_r2.
(ppc64_elf_edit_toc): Check HA relocs.
(ha_reloc_match): Delete function.
(ppc64_elf_relocate_section): Remove delayed HA nop optimization.
Instead do it and low part optimization based on
ha_relocs_not_using_r2.
ld/testsuite/
* ld-powerpc/tocopt.d: Update.
* ld-powerpc/tocopt5.d, * ld-powerpc/tocopt5.s: New test.
* ld-powerpc/powerpc.exp: Run new test.
* elf64-ppc.c (adjust_toc_syms): Delete redundant code.
(ppc64_elf_edit_toc): Fix style nit. Report some details
on linker failure due to reference in debug or non-alloc
sections to optimized away toc entry, and don't abort.
* elf64-ppc.c (maybe_strip_output): New function.
(ppc64_elf_size_stubs): Use it to strip .branch_lt and .eh_frame.
ld/testsuite/
* ld-powerpc/tlsexe.r: Update for stripped .branch_lt.
* ld-powerpc/tlsexetoc.r: Likewise.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlstocso.r: Likewise.
dyn relocs when called to copy flags for a weak sym.
* elf64-ppc.c (ppc64_elf_copy_indirect_symbol): Likewise.
(ppc64_elf_merge_private_bfd_data): Delete.
(bfd_elf64_bfd_merge_private_bfd_data): Define as
_bfd_generic_verify_endian_match.
functions rather than warning callback or _bfd_error_handler.
* elf32-ppc.c: Likewise.
* elf64-ppc.c: Likewise.
* elf32-ppc.c (ppc_elf_tls_optimize): Use %H in __tls_get_addr lost
arg error.
* elf64-ppc.c (ppc64_elf_tls_optimize): Likewise.
* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Do not check for
SEC_LOAD.
gdb/
Fix convert_code_addr_to_desc_addr for ppc64 files after eu-strip.
* elfread.c (elf_symfile_read): New variable synth_abfd, pass it to
bfd_get_synthetic_symtab.
* jit.c (jit_register_code): Pass NULL to the new parameter parent.
* machoread.c (macho_add_oso_symfile): Pass main_objfile to the new
parameter parent, remove the call to add_separate_debug_objfile.
* solib.c (solib_read_symbols): Pass NULL to the new parameter parent.
* symfile-mem.c (symbol_file_add_from_memory): Likewise.
* symfile.c (symbol_file_add_with_addrs_or_offsets): New parameter
parent, new comment for it, call add_separate_debug_objfile for it.
(symbol_file_add_separate): Pass objfile as the parameter parent,
remove the call to add_separate_debug_objfile.
(symbol_file_add_from_bfd): New parameter parent, pass it.
(symbol_file_add): Pass NULL to the new parameter parent.
* symfile.h (symbol_file_add_from_bfd): New parameter parent.
gdb/testsuite/
* gdb.base/eu-strip-infcall.c: New file.
* gdb.base/eu-strip-infcall.exp: New file.
(ppc64_elf_link_just_syms): New function.
(opd_entry_value): Don't assume big-endian host.
(get_r2off): New function.
(ppc_build_one_stub, ppc_size_one_stub): Use it here.
for toc pointer on any section having makes_toc_func_call set.
(check_pasted_section): Ensure pasted .init/.fini fragments use
the same toc if any has makes_toc_func_call set.
* elf-bfd.h (struct bfd_elf_section_reloc_data): New structure.
(struct bfd_elf_section_data): New members REL and RELA; delete
members REL_HDR, REL_HDR2, REL_COUNT, REL_COUNT2, REL_IDX,
REL_IDX2, REL_HASHES.
(_bfd_elf_init_reloc_shdr): Adjust declaration.
(_bfd_elf_single_rel_hdr): Declare.
(RELOC_AGAINST_DISCARDED_SECTION): Use it.
* elf.c (bfd_section_from_shdr): Adjusted to match changes in
data structures.
(_bfd_elf_init_reloc_shdr): New arg RELDATA. Remove arg REL_HDR.
All callers changed. Allocate memory for the Elf_Internal_Shdr
structure.
(_bfd_elf_single_rel_hdr): New function.
(struct fake_section_arg): New structure.
(elf_fake_section): Expect to see a pointer to it in the third
argument. If doing a relocatable link, allocate both REL and RELA
sections as needed.
(assign_section_numbers): Adjusted to match changes in
data structures.
(_bfd_elf_compute_section_file_positions): Call elf_fake_sections
with a struct fake_section_args argument.
* elfcode.h (elf_write_relocs): Adjusted to match changes in
data structures.
(elf_slurp_reloc_table): Likewise.
* elflink.c (_bfd_elf_link_read_relocs): Likewise.
(_bfd_elf_link_size_reloc_section): Remove arg REL_HDR, replace with
RELDATA. Remove argument O. All callers changed. Remove code to
discover the right rel_hdr and count.
(_bfd_elf_link_output_relocs): Adjusted to match changes in
data structures.
(elf_link_adjust_relocs): Remove args REL_HDR, COUNT and REL_HASH;
replace with RELDATA. All callers changed.
(elf_link_input_bfd): Correctly generate rel_hash data when both
REL and RELA sections are present.
(elf_reloc_link_order): Adjusted to match changes in
data structures.
(bfd_elf_final_link): Simplify code to count relocs. Free the
hashes array for both REL and RELA.
(get_dynamic_reloc_section_name): Use _bfd_elf_single_reloc_hdr
* elf32-m32r.c (m32r_elf_fake_sections, elf_backend_fake_sections):
Delete.
* elf32-tic6x.c (elf32_tic6x_fake_sections, elf_backend_fake_sections):
Delete.
(elf32_tic6x_rel_relocation_p): Adjusted to match changes in
data structures.
* elf32-microblaze.c (microblaze_elf_check_relocs): Use
_bfd_elf_single_rel_hdr.
* elf32-ppc.c (ppc_elf_relax_section): Likewise.
* elf32-spu.c (spu_elf_relocate_section): Likewise.
* elf64-alpha.c (elf64_alpha_relocate_section): Likewise.
* elf64-hppa.c (get_reloc_section): Likewise.
* elf64-mips.c (mips_elf64_slurp_reloc_table): Adjusted to match
changes in data structures.
(mips_elf64_write_relocs): Use _bfd_elf_single_rel_hdr.
* elf64-ppc.c (ppc64_elf_edit_opd): Likewise.
(ppc64_elf_edit_toc): Likewise.
(get_relocs): Adjusted to match changes in data structures.
Allocate an Elf_Internal_Shdr structure if necessary.
(ppc64_elf_finish_dynamic_sections): Use _bfd_elf_single_rel_hdr.
* elf64-sparc.c (elf64_sparc_slurp_reloc_table): Adjusted to match
changes in data structures.
* elfxx-ia64.c (get_reloc_section): Use _bfd_elf_single_rel_hdr.
* elfxx-mips.c (MIPS_RELOC_RELA_P): Remove macro.
(mips_elf_rel_relocation_p): Adjusted to match changes in data
structures.
(_bfd_mips_elf_relocate_section): Use mips_elf_rel_relocation_p rather
than MIPS_RELOC_RELOCA_P.
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Use
_bfd_elf_single_rel_hdr.
(_bfd_sparc_elf_relocate_section): Likewise.
ld/
* emultempl/xtensaelf.em (replace_insn_sec_with_prop_sec): Use
_bfd_elf_single_rel_hdr.
PR corefile/8210
bfd/
* bfd-in2.h: Regenerate.
* corefile.c (bfd_core_file_pid): New.
* targets.c (BFD_JUMP_TABLE_CORE): Add NAME##_core_file_pid.
(struct bfd_target) <_core_file_pid>: New.
* libbfd-in.h (_bfd_nocore_core_file_pid): Declare.
* libbfd.c (_bfd_nocore_core_file_pid): New.
* elf-bfd.h (bfd_elf32_core_file_pid, bfd_elf64_core_file_pid):
Declare.
* elfcode.h (elf_core_file_pid): New define.
* elfcore.h (elf_core_file_pid): New function.
* elf.c (elfcore_make_pid): Rewrite.
(elfcore_grok_prstatus): Only set core_pid if not set yet.
(elfcore_grok_prstatus) [!HAVE_PRSTATUS_T_PR_WHO]: Fallback to
getting the lwpid from prstat.pr_pid.
* elf64-x86-64.c (elf64_x86_64_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
(elf64_x86_64_grok_psinfo): Extract the the main process's PID,
and store it in elf_tdata's core_pid field.
* elf32-i386.c (elf_i386_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
(elf_i386_grok_psinfo): Extract the the main process's PID, and
store it in elf_tdata's core_pid field.
* elf32-am33lin.c (elf32_am33lin_grok_prstatus): Write the LWPID
to elf_tdata's core_lwpid instead of to core_pid.
* elf32-arm.c (elf32_arm_nabi_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-cris.c (cris_elf_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-frv.c (elf32_frv_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-hppa.c (elf32_hppa_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-mips.c (elf32_mips_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-ppc.c (ppc_elf_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-s390.c (elf_s390_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-score.c (s3_bfd_score_elf_grok_prstatus): Write the LWPID
to elf_tdata's core_lwpid instead of to core_pid.
* elf32-score7.c (s7_bfd_score_elf_grok_prstatus): Write the LWPID
to elf_tdata's core_lwpid instead of to core_pid.
* elf32-sh.c (elf32_shlin_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-xtensa.c (elf_xtensa_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf64-hppa.c (elf64_hppa_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf64-mips.c (elf64_mips_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf64-ppc.c (ppc64_elf_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elfn32-mips.c (elf32_mips_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* plugin.c (bfd_plugin_core_file_pid): New function.
* aout-target.h (MY_core_file_pid): Define.
* aout-tic30.c (MY_core_file_pid, MY_core_file_p): New defines.
* coff-rs6000.c (coff_core_file_pid): New define.
(rs6000coff_vec, pmac_xcoff_vec): Use BFD_JUMP_TABLE_CORE.
* coff64-rs6000.c (coff_core_file_pid): New define.
(rs6000coff64_vec): Use BFD_JUMP_TABLE_CORE.
(xcoff64_core_file_pid): New define.
(aix5coff64_vec): Use BFD_JUMP_TABLE_CORE.
* mach-o-target.c (bfd_mach_o_core_file_pid): New define.
* aix386-core.c (aix386_core_file_pid): New define.
* hppabsd-core.c (hppabsd_core_core_file_pid): New define.
* hpux-core.c (hpux_core_core_file_pid): New define.
* irix-core.c (irix_core_core_file_pid): New define.
* lynx-core.c (lynx_core_file_pid): New define.
* osf-core.c (osf_core_core_file_pid): New define.
* ptrace-core.c (ptrace_unix_core_file_pid): New define.
* sco5-core.c (sco5_core_file_pid): New define.
* xcoff-target.h (coff_core_file_pid): New define.
* netbsd-core.c (netbsd_core_core_file_pid): New define.
gdb/
2010-08-18 Pedro Alves <pedro@codesourcery.com>
PR corefile/8210
gdb/
* corelow.c (add_to_thread_list): Don't use
gdbarch_core_reg_section_encodes_pid. Use bfd_core_file_pid.
(get_core_register_section): Don't use
gdbarch_core_reg_section_encodes_pid.
* gdbarch.sh (core_reg_section_encodes_pid): Delete.
* gdbarch.h, gdbarch.c: Regenerate.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Don't set
gdbarch_core_reg_section_encodes_pid.
* i386-sol2-tdep.c (i386_sol2_init_abi): Ditto.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Ditto.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Ditto.
(get_tls_mask, ppc_type_of_stub): Use it here.
(ppc64_elf_edit_opd): Ensure we only attempt to edit ppc64 input.
(ppc64_elf_tls_setup): Typo fix.
(adjust_toc_syms): Correctly handle symbols defined past the end
of the toc. Move syms on removed entries to next entry rather
than to start of toc.
(ppc64_elf_edit_toc): Likewise. Ensure we only attempt to
edit ppc64 input. Allocate one extra word in skip array.
Honour info->keep_memory when reading relocs if we can.
Adjust toc relocs after adjusting symbols.
PR ld/11378
* elf64-ppc.h (ppc64_elf_check_init_fini): Declare.
* elf64-ppc.c (call_check_done): Define.
(ppc64_elf_add_symbol_hook): Substitute bfd_get_section_name macro.
(ppc64_elf_check_relocs, ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_finish_multitoc_partition): Remove unnecessary check.
(toc_adjusting_stub_needed): Use call_check_done rather than toc_off.
Simplify return logic. Iterate over all .init and .fini fragments
by recursion. Set makes_toc_func_call here..
(ppc64_elf_next_input_section): ..rather than here.
(check_pasted_section, ppc64_elf_check_init_fini): New functions.
ld/
PR ld/11378
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_after_allocation): Call
ppc64_elf_check_init_fini and warn if .init/.fini use different TOCs.
* elf64-ppc.c (ppc_type_of_stub): Always set *hash to the
function descriptor symbol if there is one, not just for plt stubs.
(ppc64_elf_relocate_section): Use fdh on all ppc_get_stub_entry calls.
bfd/
2010-02-18 H.J. Lu <hongjiu.lu@intel.com>
* elf32-i386.c (elf_i386_add_symbol_hook): Don't set
has_ifunc_symbols if the symbol comes from a shared library.
* elf32-ppc.c (ppc_elf_add_symbol_hook): Likewise.
* elf32-sparc.c (elf32_sparc_add_symbol_hook): Likewise.
* elf64-ppc.c (ppc64_elf_add_symbol_hook): Likewise.
* elf64-sparc.c (elf64_sparc_add_symbol_hook): Likewise.
* elf64-x86-64.c (elf64_x86_64_add_symbol_hook): Likewise.
ld/testsuite/
2010-02-18 H.J. Lu <hongjiu.lu@intel.com>
* ld-ifunc/ifunc.exp: Expect System V OSABI in dynamic
ifunc-using executable.
(allocate_dynrelocs): Merge got entries here if not doing multi-toc.
(ppc64_elf_size_dynamic_sections): Similarly merge tlsld_got.
(ppc64_elf_layout_multitoc): Don't resize if we have already
merged got entries.
* elf64-ppc.c (struct plt_entry): Move earlier in file.
(struct got_entry): Likewise. Add is_indirect and got.ent fields.
(struct ppc64_elf_obj_tdata): Change tlsld_got to be a struct got_entry.
Update all uses.
(struct ppc_link_hash_table): Add got_reli_size and second_toc_pass.
Remove no_multi_toc.
(update_local_sym_info, ppc64_elf_check_relocs): Clear is_indirect
when allocating a new struct got_entry.
(allocate_got): New function, extracted from..
(allocate_dynrelocs): ..here. Abort on got entry in non-ppc64 bfd.
(ppc64_elf_size_dynamic_sections): Track got relocs allocated in
.reliplt by got_reli_size. Set owner on ppc64_tlsld_got entries.
(ppc64_elf_setup_section_lists): Remove output_bfd param and
no_multi_toc, add add_stub_section and layout_sections_again. Stash
new params in htab. Extract some code to..
(ppc64_elf_start_multitoc_partition): ..here. New function.
(ppc64_elf_next_toc_section): Check for linker script errors. Handle
second pass toc scan.
(merge_got_entries, merge_global_got, reallocate_got): New functions.
(ppc64_elf_reinit_toc): Rename to..
(ppc64_elf_finish_multitoc_partition): ..this.
(ppc64_elf_layout_multitoc): New function.
(ppc64_elf_size_stubs): Delete output_bfd, add_stub_section and
layout_sections_again params.
(ppc64_elf_relocate_section): Handle indirect got entries.
* elf64-ppc.h: Update prototypes. Declare new functions.
ld/
* emultempl/ppc64elf.em (build_toc_list): Report errors from
ppc64_elf_next_toc_section.
(after_allocation): Update for changed function names and params.
Run second pass of multitoc partitioning.
* elf32-ppc.c (ppc_elf_relocate_section): Delete __tls_get_addr
symbol reference from relocs belonging to calls that are
optimized away.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
* elf64-ppc.c (follow_link, elf_follow_link, ppc_follow_link): New
functions. Use throughout.
(ppc64_elf_copy_indirect_symbol): Set direct symbol "oh" field
from indirect symbol.
(lookup_fdh): Rename from get_fdh. Follow indirect sym links.
(add_symbol_adjust): Simplify.
(defined_code_entry, defined_func_desc): New functions.
(ppc64_elf_gc_keep): Follow indirect sym links. Use defined_code_entry.
(ppc64_elf_gc_mark_dynamic_ref): Use defined_func_desc and
defined_code_entry to follow indirect sym links.
(ppc64_elf_gc_mark_hook, func_desc_adjust): Likewise.
(ppc_type_of_stub): Follow indirect sym links.
(toc_adjusting_stub_needed): Likewise.
(ppc_build_one_stub): Likewise. Make undefined dot-symbols weak
rather than defining them at stub.
(ppc64_elf_relocate_section): Rewrite call test to avoid multiple
assignments in test.
ld/testsuite/
* ld-powerpc/tlsso.d: Update.
* ld-powerpc/tlsso.r: Update.
* ld-powerpc/tlstocso.d: Update.
* ld-powerpc/tlstocso.r: Update.
used by indirect function support. Count dynamic relocs for
ifunc syms.
(ppc_elf_adjust_dynamic_symbol): Tweak for ifunc.
(allocate_dynrelocs): Allocate all non-dynamic ifunc plt entries
in iplt and their relocs in reliplt. Don't make ifunc syms
dynamic. Allocate got entry relocs for non-dynamic ifunc in
reliplt. Handle other dynamic relocs for ifunc.
(ppc_elf_size_dynamic_sections): Alloc dyn relocs for static
ifunc in reliplt, likewise relocs for got against local ifunc.
Typo fix on reliplt size adjust.
(ppc_elf_relocate_section): Don't use plt scheme of allocating
relocs 1-1 with entries for iplt, instead just add using
reloc_count. Write got relocs and dyn relocs for ifunc to reliplt.
Error on invalid ifunc dyn relocs.
(ppc_elf_finish_dynamic_symbol): Adjust for non-dynamic ifunc plt
in iplt/reliplt.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_JMP_IREL,
R_PPC64_REL16, R_PPC64_REL16_LO, R_PPC64_REL16_HI, R_PPC64_REL16_HA.
(ppc64_elf_reloc_type_lookup): Handle new relocs.
(ppc64_elf_check_relocs): Likewise. Count dyn relocs for ifunc.
(allocate_dynrelocs): As for elf32-ppc.c above.
(ppc64_elf_size_dynamic_sections): Likewise.
(ppc_build_one_stub): Put non-dynamic ifunc plt call stubs in iplt,
and their relocs in reliplt. Use R_PPC64_JMP_IREL.
(ppc_size_one_stub): Similarly.
(ppc64_elf_relocate_section): As for elf32-ppc.c above. Handle new
relocs too.
(ppc64_elf_finish_dynamic_symbol): As for elf32-ppc.c above.
* ppc.h (R_PPC_TLSGD, R_PPC_TLSLD): Add new relocs.
* ppc64.h (R_PPC64_TLSGD, R_PPC64_TLSLD): Add new relocs.
bfd/
* reloc.c (BFD_RELOC_PPC_TLSGD, BFD_RELOC_PPC_TLSLD): New.
* section.c (struct bfd_section): Add has_tls_get_addr_call.
(BFD_FAKE_SECTION): Init new flag.
* ecoff.c (bfd_debug_section): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-ppc.c (ppc_elf_howto_raw): Add R_PPC_TLSGD and R_PPC_TLSLD.
(ppc_elf_reloc_type_lookup): Handle new relocs.
(ppc_elf_check_relocs): Set has_tls_get_addr_call on finding such
without marker relocs.
(ppc_elf_tls_optimize): Allow out-of-order __tls_get_addr relocs
if section has no old-style calls.
(ppc_elf_relocate_section): Set tls_mask for non-tls relocs too.
Don't try to optimize new-style __tls_get_addr call when handling
arg setup relocs. Instead do so for R_PPC_TLSGD and R_PPC_TLSLD
relocs.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_TLSGD, R_PPC64_TLSLD.
(ppc64_elf_reloc_type_lookup): Handle new relocs.
(ppc64_elf_check_relocs): Set has_tls_get_addr_call on finding such
without marker relocs.
(ppc64_elf_tls_optimize): Allow out-of-order __tls_get_addr relocs
if section has no old-style calls. Set toc_ref for new relocs as
appropriate.
(ppc64_elf_relocate_section): Set tls_mask for non-tls relocs too.
Don't try to optimize new-style __tls_get_addr call when handling
arg setup relocs. Instead do so for R_PPC_TLSGD and R_PPC_TLSLD
relocs.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Error if ppc32 tls got relocs
have non-zero addend.
(md_assemble): Parse args of __tls_get_addr calls.
(md_apply_fix): Handle BFD_RELOC_PPC_TLSGD and BFD_RELOC_PPC_TLSLD.
ld/testsuite/
* ld-powerpc/tlsmark.s, * ld-powerpc/tlsmark.d: New test.
* ld-powerpc/tlsmark32.s, * ld-powerpc/tlsmark32.d: New test.
* ld-powerpc/powerpc.exp: Run them.
add toc.symndx and toc.add.
(ppc64_elf_check_relocs): Don't set htab->tls_get_addr here.
Set up toc.add.
(get_tls_mask): Add toc_addend param, set from toc.add. Adjust all
callers.
(ppc64_elf_tls_setup): Set htab->tls_get_addr and tls_get_addr_fd.
(branch_reloc_hash_match): New function, extracted from..
(ppc64_elf_tls_optimize): ..here.
(ppc64_elf_relocate_section): Properly set addends when optimizing
tls sequences. Avoid unnecessary reading and writing of insns.
Only redo reloc when symbol changed. Bypass symbol checks when
using tlsld_got.
* elf32-ppc.c (ppc_elf_tls_setup): Correct comment.
(branch_reloc_hash_match): New function, extracted from..
(ppc_elf_tls_optimize): ..here.
(ppc_elf_relocate_section): Avoid unnecessary reading of insns.
Don't clear addend on zapped __tls_get_addr reloc.
given name matches the name of the reloc-containing section
associated with the given section.
(get_dynamic_reloc_section_name): New function. Computes the name
of the section that contains the dynamic relocs associated with
the given section.
(_bfd_elf_get_dynamic_reloc_section): New function. Returns a
pointer to the section containing the dynamic relocs associated
with the given section.
(_bfd_elf_make_dynamic_reloc_section): New function. Creates a
section to contain the dynamic relocs associated with a given
section.
* elf-bfd.h: Prototype the new functions.
* elf-m10300.c (mn10300_elf_check_relocs): Use new functions.
(mn10300_elf_final_link_relocs): Likewise.
* elf32-arm.c (reloc_section_p): Delete - replaced by new
functions.
(elf32_arm_final_link_relocate): Use new functions.
(elf32_arm_check_relocs): Likewise.
* elf32-cris.c (cris_elf_relocate_section): Likewise.
(elf_cris_check_relocs): Likewise.
* elf32-hppa.c (elf32_hppa_check_relocs): Likewise.
* elf32-i370.c (i370_elf_check_relocs): Likewise.
(i370_elf_relocate_section): Likewise.
* elf32-i386.c (elf_i386_check_relocs): Likewise.
* elf32-m32r.c (m32r_elf_relocate_section): Likewise.
(m32r_elf_check_relocs): Likewise.
* elf32-m68k.c (elf_m68k_check_relocs): Likewise.
* elf32_ppc.c (ppc_elf_check_relocs): Likewise.
(ppc_elf_relocate_section): Likewise.
* elf32-s390.c (elf_s390_check_relocs): Likewise.
* elf32-sh.c (sh_elf_relocate_section): Likewise.
(sh_elf_check_relocs): Likewise.
* elf32-vax.c (elf_vax_check_relocs): Likewise.
(elf_vax_relocate_section): Likewise.
* elf64-alpha.c (elf64_alpha_check_relocs): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Likewise.
* elf64-s390.c (elf_s390_check_relocs): Likewise.
* elf64-sh64.c (sh_elf64_relocate_section): Likewise.
* elf64-x86-64.c (elf64_x86_64_check_relocs): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Likewise.
* elf32-bfin.c (bfin_check_relocs): Remove redundant local
variable 'sreloc'.
(bfin_relocate_section): Likewise.
* elf32-v850.c (v850_elf_check_relocs): Likewise.
(ppc_elf_get_synthetic_symtab): New function.
(bfd_elf32_get_synthetic_symtab): Define.
* elf64-ppc.c (section_covers_vma): New function.
(ppc64_elf_get_synthetic_symtab): Generate sym@plt on glink branch
table entries, and __glink_PLTresolve on resolver stub.
(ppc64_elf_build_stubs): Rename __glink sym to __glink_PLTresolve.
* elf32-ppc.c (MUST_BE_DYN_RELOC): Delete.
(must_be_dyn_reloc): New function.
(ppc_elf_check_relocs): Don't set DF_STATIC_TLS for tprel relocs
in pies.
(ppc_elf_tls_optimize): Optimise pies.
(ppc_elf_relocate_section): Use a section symbol rather than no
symbol if possible for LD->IE TLS sequence, but don't error if
we must use no symbol.
* elf64-ppc.c (MUST_BE_DYN_RELOC): As for elf32-ppc.c.
(must_be_dyn_reloc): Likewise.
(ppc64_elf_check_relocs): Likewise.
(ppc64_elf_tls_optimize): Likewise.
(ppc64_elf_relocate_section): Likewise.
* elf-bfd.h (enum elf_object_id): New enum, used to identify
target specific extensions to the elf_obj_tdata structure.
(struct elf_obj_tdata): New field 'object_id'.
(elf_object_id, elf_program_header_size, elf_symtab_hdr): New
macros for accessing fields in the elf_obj_tdata structure.
(bfd_elf_mkobject): Rename to bfd_elf_make_generic_object.
(bfd_elf_allocate_object): New function.
* elf.c (bfd_elf_mkobject): Rename to bfd_elf_make_generic_object
and implement by calling bfd_elf_allocate_object.
(bfd_elf_allocate_object): New function: Allocates an
elf_obj_tdata structure, possibly with a target specific
extension.
* elfxx-target.h (bfd_elfNN_mkobject): Use
bfd_elf_make_generic_object as the default value.
* elf32-arm.c (elf32_arm_obj_tdata): Rename to elf_arm_obj_tdata
for consistency with other, similar structures.
(is_arm_elf): New macro. Checks a BFD to make sure that is an ARM
ELF bfd.
(elf32_arm_mkobject): Call bfd_elf_allocate_object.
(bfd_elf32_arm_vfp11_erratum_scan): Use is_arm_elf macro to check
the bfd being processed.
(bfd_elf32_arm_vfp11_fix_veneer_locations): Likewise.
(bfd_elf32_arm_set_target_relocs): Likewise.
(bfd_elf32_arm_final_link_relocate): Likewise.
(bfd_elf32_arm_copy_private_bfd_data): Likewise.
(bfd_elf32_arm_merge_eabi_attributes): Likewise.
(bfd_elf32_arm_merge_private_bfd_data): Likewise.
(bfd_elf32_arm_check_relocs): Likewise.
(bfd_elf32_arm_gc_mark_extra_sections): Likewise.
(bfd_elf32_arm_size_dynamic_sections): Likewise.
(bfd_elf32_arm_process_before_allocation): Use elf_symtab_hdr.
(bfd_elf32_arm_init_maps): Likewise.
(bfd_elf32_arm_final_link_relocate): Likewise.
(bfd_elf32_arm_relocate_section): Likewise.
(bfd_elf32_arm_gc_sweep_hook): Likewise.
(bfd_elf32_arm_check_relocs): Likewise.
(bfd_elf32_arm_size_dynamic_sections): Likewise.
* elf32-i386.c (elf_i386_mkobject): Call bfd_elf_allocate_object.
(is_i386_elf): New macro. Checks a BFD to make sure that is an x86
ELF bfd.
(elf_i386_check_relocs): Use is_i386_elf macro to check the bfd
being processed.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
(elf_i386_check_relocs): Use elf_symtab_hdr.
(elf_i386_gc_sweep_hook): Likewise.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_mkobject): Call bfd_elf_allocate_object.
(elf_create_pointer_linker_section): Use is_ppc_elf_target to
verify that the bfd before accessing target specific fields.
(ppc_elf_check_relocs): Likewise.
(elf_finish_pointer_linker_section): Likewise.
(elf_create_pointer_linker_section): Use elf_symtab_hdr.
(ppc_elf_check_relocs): Likewise.
(ppc_elf_gc_sweep_hook): Likewise.
(ppc_elf_tls_optimize): Likewise.
(ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relax_section): Likewise.
(ppc_elf_relocate_section): Likewise.
* elf32-s390.c (struct elf_s390_obj_tdata): Add a comment
reminding programmers to keep this structure in sync with the one
defined in elf64-s390.c.
(elf_s390_mkobject): Call bfd_elf_allocate_object.
(is_s390_elf): New macro. Checks a BFD to make sure that is an s390
ELF bfd.
(elf_s390_check_relocs): Use is_s390_elf macro to check the bfd
being processed.
(elf_s390_size_dynamic_sections): Likewise.
(elf_s390_relocate_section): Likewise.
(elf_s390_check_relocs): Use elf_symtab_hdr.
(elf_s390_gc_sweep_hook): Likewise.
(elf_s390_size_dynamic_sections): Likewise.
(elf_s390_relocate_section): Likewise.
* elf32-sh.c (sh_elf_mkobject): Call bfd_elf_allocate_object.
(is_sh_elf): New macro. Checks a BFD to make sure that is an SH
ELF bfd.
(sh_elf_size_dynamic_sections): Use is_sh_elf macro to check the
bfd being processed.
(sh_elf_relocate_section): Likewise.
(sh_elf_check_relocs): Likewise.
(sh_elf_copy_private_data): Likewise.
(sh_elf_relax_section): Use elf_symtab_hdr.
(sh_elf_size_dynamic_sections): Likewise.
(sh_elf_relocate_section): Likewise.
(sh_elf_get_relocated_section_contents): Likewise.
(sh_elf_gc_sweep_hook): Likewise.
(sh_elf_check_relocs): Likewise.
* elf64-alpha.c (elf64_alpha_mkobject): Call bfd_elf_allocate_object.
(is_alpha_elf): New macro. Checks a BFD to make sure that is an
Alpha ELF bfd.
(elf64_alpha_create_got_section): Use is_alpha_elf macro to check
the bfd being processed.
(elf64_alpha_create_dynamic_section): Likewise.
(elf64_alpha_check_relocs): Likewise.
(elf64_alpha_size_got_sections): Likewise.
(elf64_alpha_relax_section): Likewise.
(elf64_alpha_relocate_section): Likewise.
(elf64_alpha_final_link): Likewise.
(elf64_alpha_check_relocs): Use elf_symtab_hdr.
(elf64_alpha_relax_section): Likewise.
(elf64_alpha_relocate_section_r): Likewise.
(elf64_alpha_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_mkobject): Call bfd_elf_allocate_object.
(ppc64_elf_check_relocs): Use is_ppc64_elf_target to check the bfd
being processed.
(opd_entry_value): Likewise.
(allocate_dynrelocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
(ppc64_elf_check_relocs): Use elf_symtab_hdr.
(opd_entry_value): Likewise.
(ppc64_elf_gc_sweep_hook): Likewise.
(get_sym_h): Likewise.
(ppc64_elf_edit_opd): Likewise.
(ppc64_elf_tls_optimize): Likewise.
(ppc64_elf_edit_toc): Likewise.
(ppc64_elf_size_dynamic_sections): Likewise.
(toc_adjusting_stub_needed): Likewise.
(ppc64_elf_size_stubs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* elf64-s390.c (struct elf_s390_obj_tdata): Add a comment
reminding programmers to keep this structure in sync with the one
defined in elf32-s390.c.
(elf_s390_mkobject): Call bfd_elf_allocate_object.
(is_s390_elf): New macro. Checks a BFD to make sure that is an s390
ELF bfd.
(elf_s390_check_relocs): Use is_s390_elf macro to check the bfd
being processed.
(elf_s390_size_dynamic_sections): Likewise.
(elf_s390_relocate_section): Likewise.
(elf_s390_check_relocs): Use elf_symtab_hdr.
(elf_s390_gc_sweep_hook): Likewise.
(elf_s390_size_dynamic_sections): Likewise.
(elf_s390_relocate_section): Likewise.
* elf64-x86_64.c (elf64_x86_64_mkobject): Call bfd_elf_allocate_object.
(is_x86_64_elf): New macro. Checks a BFD to make sure that is an
x86_64 ELF bfd.
(elf64_x86_64_check_relocs): Use is_x86_64_elf macro to check the bfd
being processed.
(elf64_x86_64_size_dynamic_sections): Likewise.
(elf64_x86_64_relocate_section): Likewise.
(elf64_x86_64_check_relocs): Use elf_symtab_hdr.
(elf64_x86_64_gc_sweep_hook): Likewise.
(elf64_x86_64_size_dynamic_sections): Likewise.
(elf64_x86_64_relocate_section): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_mkobject): Call bfd_elf_allocate_object.
(is_sparc_elf): New macro. Checks a BFD to make sure that is a Sparc
ELF bfd.
(_bfd_sparc_elf_check_relocs): Use is_sparc_elf macro to check the
bfd being processed.
(_bfd_sparc_elf_gc_sweep_hook): Likewise.
(_bfd_sparc_elf_size_dynamic_sections): Likewise.
(_bfd_sparc_elf_check_relocs): Use elf_symtab_hdr.
(_bfd_sparc_elf_gc_sweep_hook): Likewise.
(_bfd_sparc_elf_size_dynamic_sections): Likewise.
(_bfd_sparc_elf_relocate_section): Likewise.
PR 5604
* elf-bfd.h (struct elf_backend_data): Add gc_keep. Remove param
names from others.
(_bfd_elf_gc_keep): Declare.
* elfxx-target.h (elf_backend_gc_keep): Define.
(elfNN_bed): Init new field.
* elflink.c (_bfd_elf_gc_keep): New function.
(bfd_elf_gc_sections): Call gc_keep.
* elf64-ppc.c (elf_backend_gc_keep): Define.
(struct _ppc64_elf_section_data): Move .opd related fields to
a struct so they don't occupy the same storage. Adjust accesses
throughout file.
(ppc64_elf_gc_keep): New function, split out from..
(ppc64_elf_gc_mark_hook): ..here. Don't call _bfd_elf_gc_mark
to mark .opd section, just set gc_mark.
(ppc64_elf_edit_opd): Remove no_opd_opt parm. Don't set opd->adjust
unless we are changing .opd. Test non-NULL opd->adjust at all
accesses throughout file.
* elf64-ppc.h (ppc64_elf_edit_opd): Update prototype.
ld/
PR 5604
* ldlang.c (lang_gc_sections): Move code to set SEC_KEEP on entry
syms to _bfd_elf_gc_keep.
* emultempl/ppc64elf.em (ppc_before_allocation): Don't call
ppc64_elf_edit_opd if no_opd_opt.
* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Set udata.p of
synthetic symbol to point to the ELF symbol it was derived from.
gdb/ChangeLog:
* elfread.c (ST_REGULAR, ST_DYNAMIC, ST_SYNTHETIC): New defines.
(elf_symtab_read): Rename DYNAMIC argument to TYPE. Do not access
ELF-private symbol data when processing synthetic symbols. Use
udata.p to get at size of ppc64 synthetic 'dot' symbols.
(elf_symfile_read): Pass TYPE argument to elf_symtab_read.
* elfxx-target.h (elf_backend_write_core_note): Define and use.
* elf.c (elfcore_write_prpsinfo): Call the above. Add support for
32-bit core note on 64-bit target.
(elfcore_write_prstatus): Likewise.
(elfcore_write_lwpstatus): Make note_name const.
(elfcore_write_prfpreg): Likewise.
(elfcore_write_pstatus): Add support for 32-bit core note on 64-bit
target.
* elf32-ppc.c (ppc_elf_write_core_note): New function.
(elf_backend_write_core_note): Define.
* elf64-ppc.c (ppc64_elf_write_core_note): New function.
(elf_backend_write_core_note): Define.
(struct _ppc64_elf_section_data): Move "t_symndx" into opd union,
and rename fields. Add sec_type and has_14bit_branch.
(struct ppc_link_hash_table): Remove has_14bit_branch.
(get_opd_info, get_tls_mask, ppc64_elf_edit_opd): Adjust.
(ppc64_elf_relocate_section): Likewise.
(ppc64_elf_check_relocs): Likewise. Set per-section has_14bit_branch.
(ppc64_elf_size_stubs): Don't set default group size here.
(group_sections): Instead do so here, and group sections using
their individual requirements.
and union.
(struct ppc_link_hash_entry): Add "next_dot_sym".
(struct ppc_link_hash_table): Add "dot_syms".
(link_hash_newfunc): Make list of syms starting with a dot.
(ppc_get_stub_entry, adjust_opd_syms): Adjust.
(ppc64_elf_add_symbol_hook): Don't set has_dotsym.
(struct add_symbol_adjust_data): Delete.
(add_symbol_adjust): Simplify params and return.
(ppc64_elf_check_directives): Just process the "dot_syms" lists,
not all syms.
argument and emits the string followed by a comma and then the length of
the string.
(CONST_STRNEQ): New macro. Checks to see if a variable string has a constant
string as its initial characters.
(CONST_STRNCPY): New macro. Copies a constant string to the start of a
variable string.
* bfd-in2.h: Regenerate.
* <remainign files>: Make use of the new macros.
R_PPC64_TPREL64 and R_PPC64_DTPMOD64 relocs when they are in
the .toc and referenced by a TLS code sequence.
(ppc64_elf_edit_toc): Cater for the unlikely situation that
.toc is the first section in a file.
opd section sym when opd has been edited. Use correct addend
when determining branch 'y' bit and branch overflow. Adjust and
save opd relocs for ld -r too.
entry sym before deciding no stub is needed.
(ppc64_elf_size_stubs): When calculating branch destination,
don't use func desc sym for old ABI objects unless func entry
is undefined.
branch offset is in range with an error. Print full stub name on
errors.
(ppc_size_one_stub): Print full stub name on errors.
(group_sections): Warn if section size exceeds group size.
(ppc64_elf_size_stubs): Continue relaxing when stub types change.
of the usual sections are found.
* elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Tidy.
Strip .dynbss if it is zero size.
* elf32-arm.c (elf32_arm_size_dynamic_sections): Likewise.
* elf32-cris.c (elf_cris_size_dynamic_sections): Likewise.
* elf32-hppa.c (elf32_hppa_size_dynamic_sections): Likewise.
* elf32-i370.c (i370_elf_size_dynamic_sections): Likewise, and
.dynsbss.
(i370_elf_finish_dynamic_sections): Don't attempt to write .got
when it is zero size.
* elf32-i386.c (elf_i386_size_dynamic_sections): Correct handling
of .dynbss and zero size sections.
* elf32-m32r.c (m32r_elf_size_dynamic_sections): Strip .dynbss if
it is zero size.
* elf32-m68k.c (elf_m68k_size_dynamic_sections): Tidy. Strip
.dynbss if zero size.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Likewise, .dynsbss
too.
* elf32-s390.c (elf_s390_size_dynamic_sections): Likewise.
* elf32-sh.c (sh_elf_size_dynamic_sections): Likewise.
* elf32-vax.c (elf_vax_size_dynamic_sections): Likewise.
* elf32-xtensa.c (elf_xtensa_size_dynamic_sections): Tidy. Strip
.plt.* and .got.plt.* if zero size.
* elf64-alpha.c (elf64_alpha_size_dynamic_sections): Tidy. Strip
.got* and .dynbss if zero size.
* elf64-hppa.c (elf64_hppa_size_dynamic_sections): Tidy. Strip
* elf64-ppc.c (create_linkage_sections): Create branch lookup table
in .data.rel.ro.brlt or .rodata.brlt, and similarly for associated
reloc section.
(create_got_section): Always create new .got and .rela.got sections.
(ppc64_elf_size_dynamic_sections): Tidy. Strip .dynbss if zero size.
* elf64-s390.c (elf_s390_size_dynamic_sections): Likewise.
* elf64-sh64.c (sh64_elf64_size_dynamic_sections): Likewise.
* elf64-x86-64.c (elf64_x86_64_size_dynamic_sections): Handle
dynamic bss sections correctly.
* elfxx-mips.c (_bfd_mips_elf_size_dynamic_sections): Tidy.
* elfxx-sparc.c (_bfd_sparc_elf_size_dynamic_sections): Tidy. Strip
.dynbss if zero size.
* elf64-pcc.c (ppc64_elf_gc_mark_hook): For the local sym in .opd
case, include addend when indexing .opd section map.
(ppc64_elf_edit_opd): Add no_opd_opt param. Do nothing besides
clear opd_adjust array if no_opd_opt set. Tidy code.
* elf64-ppc.h (ppc64_elf_edit_opd): Update prototype.
ld/
* emultempl/ppc64elf.em (ppc_before_allocation): Always run
ppc64_elf_edit_opd.
Alan Modra
Jan Kratochvil
H.J. Lu
Andreas Schwab
Doug Kwan
Maciej W. Rozycki
Nick Clifton
Daniel Jacobowitz
Bernd Schmidt
Thomas Schwinge
Pedro Alves
Richard Sandiford
Ulrich Weigand
Tristan Gingold
Jan Beulich
Jakub Jelinek
Greg McGary
Ben Elliston