* remote.c (remote_read_description_p): New function.
(remote_start_remote): Try to fetch the target description
before adding shared libraries. Try again later if the
target is running but stopped.
(remote_open_1): Mark extended targets as exited by default.
(remote_read_description): Check target_has_execution.
(putpkt_binary, read_frame, getpkt_or_notif_sane_1): Use it. Make
sure debug output printing a packet buffer goes through a single
fprintf_unfiltered call.
* utils.c (vfprintf_unfiltered): If outputting timestamps, end
output with a newline if it wasn't going to already.
fetch libraries and insert breakpoints after connecting.
* infcmd.c (post_create_inferior): If the solist is shared between
inferiors, no need to refetch it on every new inferior.
(detach_command): If the shared library list is shared between
inferiors, then don't clear it on every inferior detach.
* gdbarch.sh (has_global_solist): New.
* i386-dicos-tdep.c (i386_dicos_init_abi): Set
gdbarch_has_global_solist.
* target.c (target_pre_inferior): If the shared library list is
shared between inferiors, then don't clear it here, neither
invalidate the memory regions or clear the target description.
(target_detach): If the shared library list is shared between
inferiors, then don't remove breakpoints from the target here.
(target_disconnect): Comment.
* solib.c (update_solib_list): Check for null_ptid.
* breakpoint.c (insert_breakpoints, update_global_location_list):
If the shared library list is shared between inferiors, insert
breakpoints even if there's no execution.
(breakpoint_init_inferior): If the shared library list is shared
between inferiors, don't delete breakpoints or mark them
uninserted here.
* gdbarch.c, gdbarch.h: Regenerate.
field.
(target_supports_multi_process): New define.
* target.c (update_current_target): Inherit and de_fault
to_supports_multi_process.
* infcmd.c (attach_command): Allow attaching to multiple processes
if the target supports it.
(detach_command): If the target claims there is still execution,
don't clear the thread list.
* remote.c (remote_supports_multi_process): New.
(init_remote_ops): Register remote_supports_multi_process.
* remote.c (pending_stop_reply): New.
(struct remote_state) <non_stop_aware, support_vCont_t>: New
fields.
(remote_async_inferior_event_token)
(remote_async_get_pending_events_token): New.
(notice_new_inferiors): New, abstracted out from record_currthread.
(record_currthread): Call it.
(remote_threads_info): Default threads to running in non-stop
mode. In non-stop mode, only qfThreadInfo is supported.
(remote_close): Discard all pending stop_replies. Close the event
sources.
(set_stop_requested_callback): New.
(remote_start_remote): Implement non-stop mode startup. In
all-stop, don't clear the thread list here.
(remote_non_stop_feature): New.
(remote_protocol_features): Add a "QNonStop" feature.
(remote_open_1): Clear cached_wait_status and non_stop_aware.
Clear the thread list here.
(remote_detach_1): Discard pending stop replies of the process we
detached from.
(extended_remote_attach_1): Implement non-stop mode.
(remote_vcont_probe): Recognize `vCont;t'.
(remote_vcont_resume): Implement non-stop mode.
(remote_resume): Don't set waiting_for_stop_reply in non-stop
mode.
(remote_stop_ns): New.
(remote_stop): Rename to ...
(remote_stop_as): ... this. If we have a cached wait status,
don't bother interrupting the remote.
(remote_stop): Reimplement as wrapper around remote_stop_as and
remote_stop_ns.
(interrupt_query): Don't query in async mode.
(struct cached_reg, cahed_reg_t): New.
(struct stop_reply): New.
(stop_reply_queue): New.
(stop_reply_xmalloc, stop_reply_xfree)
(discard_pending_stop_replies, do_stop_reply_xfree)
(queued_stop_reply, push_stop_reply, peek_stop_reply)
(remote_parse_stop_reply, remote_get_pending_stop_replies)
(process_stop_reply): New.
(remote_wait_ns): New.
(remote_wait_as): Use remote_parse_stop_reply. Invalidate the
notion of current general thread is a process exit was reported.
(remote_wait): Call remote_wait_ns in non-stop mode.
(handle_notification): New.
(putpkt_binary): Handle notifications. Don't care for
waiting_for_stop_reply in non-stop mode.
(getpkt_sane): Rename to ...
(getpkt_or_notif_sane_1): ... this. Add `expecting_notif'
argument. Handle it. Handle notifications.
(getpkt_sane): Reimplement as wrapper around getpkt_or_notif_sane_1.
(getpkt_or_notif_sane): New.
(select_new_thread_callback): Check for exited state instead of
comparing the ptid against minus_one_ptid.
(extended_remote_create_inferior_1): Query the remote about the
current thread.
(remote_supports_non_stop): New.
(init_remote_ops): Register it.
(remote_async_inferior_event_handler): New.
(remote_async_get_pending_events_handler): New.
* infcmd.c (proceed_thread_callback): Comment.
(proceed_after_attach_callback, proceed_after_attach): New.
(attach_command_post_wait): In background attach, resume all
threads, but only if they are unsignalled, and not explicitly
stopped. In foreground attach, in non-stop mode, make sure to
stop all threads of the just attached to process.
(attach_command): In non-stop mode: If doing a background attach,
stop at least one thread. If a foreground attach, stop all
threads.
Target interface for reverse debugging.
* target.h (enum target_waitkind):
Add new wait event, TARGET_WAITKIND_NO_HISTORY.
(struct target_ops): New method to_can_execute_reverse.
(target_can_execute_reverse): New macro.
* target.c (update_current_target): Inherit to_can_execute_reverse.
Remote interface for reverse debugging.
* remote.c (remote_can_execute_reverse): New target method.
(remote_resume): Check for reverse exec direction, and send
appropriate command to target.
(remote_wait_as): Check target response for NO_HISTORY status.
Also check for empty reply (target doesn't understand "bs" or "bc).
(remote_vcont_resume): Jump out if attempting reverse execution.
Event handling interface for reverse debugging.
* infrun.c (execution_direction): New state variable.
(enum inferior_stop_reason): Add NO_HISTORY reason.
(handle_inferior_event): Handle TARGET_WAITKIND_NO_HISTORY.
Handle stepping over a function call in reverse.
Handle stepping thru a line range in reverse.
Handle setting a step-resume breakpoint in reverse.
Handle stepping into a function in reverse.
Handle stepping between line ranges in reverse.
(print_stop_reason): Print reason for NO_HISTORY.
(step_into_function): Rename to handle_step_into_function.
(handle_step_into_function_backward): New function.
(set_exec_direction_func, show_exec_direction_func): New funcs.
(proceed): No need to singlestep over a breakpoint
when resuming in reverse.
* inferior.h (enum exec_direction_kind): New enum.
(execution_direction): Export new execution state variable.
* breakpoint.c (make_breakpoint_silent): New function.
* breakpoint.h (make_breakpoint_silent): Export.
* infcmd.c (finish_command): Check for reverse exec direction.
(finish_backward): New function, handle finish cmd in reverse.
User interface for reverse execution.
* Makefile.in (reverse.c): New file.
* reverse.c: New file. User interface for reverse execution.
loop. Always restore the SIGINT handler. Discard all inferiors
here.
(remote_detach_1, remote_disconnect): Don't unregister the file
descriptor from the event loop here.
(interrupt_query, readchar, getpkt_sane): Pop the target instead
of morning the current inferior.
(remote_kill): Don't unregister the file descriptor from the event
loop here.
(remote_mourn_1): Don't discard inferiors here.
(remote_wait_as): ... this. Don't loop here. If the remote
didn't stop, return TARGET_WAITKIND_IGNORE.
(remote_wait): New, reimplemented on top of remote_wait_as.
querying supported features, activating noack mode, finding the
target description, enabling extended remote, and checking remote
symbols from here ...
(remote_start_remote): ... to here.
(remote_open_1): Don't pop the target if it is already gone.
* target.c (unpush_target): Check for the dummy target.
field.
(remote_open_1): Clear waiting_for_stop_reply.
(remote_resume): Set waiting_for_stop_reply.
(remote_wait): Clear or set waiting_for_stop_reply accordingly.
(putpkt_binary): If we're in async mode and waiting for a stop
reply, bail out with an error.
(extended_remote_mourn_1): Clear waiting_for_stop_reply.
* inferior.h (attach_flag): Delete.
(inferior_process): Declare.
* solib.c (update_solib_list): Adjust.
* gnu-nat.c (gnu_create_inferior, gnu_attach): Adjust.
* inf-ptrace.c (inf_ptrace_detach): Adjust.
(inf_ptrace_files_info): Get it from the current inferior.
* inf-ttrace.c (inf_ttrace_attach): Adjust.
(inf_ttrace_files_info): Get it from the current
inferior.
* inflow.c (terminal_inferior, terminal_ours_1, set_sigint_trap)
(clear_sigint_trap): Get it from the current process.
* remote.c (extended_remote_attach_1)
(extended_remote_create_inferior_1): Adjust.
* top.c (quit_confirm, quit_target): Get it from the current inferior.
* procfs.c (do_detach): Adjust.
(procfs_wait): Get it from the event inferior.
(procfs_files_info): Get it from the current inferior.
* nto-procfs.c (procfs_files_info): Likewise.
(procfs_attach): Adjust. Set the attach_flag here.
(do_attach): Don't set it here.
(procfs_detach): Don't clear it.
(procfs_mourn_inferior): Don't clear it.
* solib-osf.c (osf_solib_create_inferior_hook): Adjust.
* target.c (attach_flag): Delete.
(generic_mourn_inferior): Don't clear it.
* win32-nat.c (get_win32_debug_event): Get it from the event
process.
(do_initial_win32_stuff): Add attaching argument. Set attach_flag
in the inferior accordingly.
(win32_attach): Don't set the attach_flag here. Pass 1 to
do_intial_win32_stuff.
(win32_files_info): Get it from the current inferior.
(win32_create_inferior): Dont clear attach_flag here. Pass 0 to
do_intial_win32_stuff.
* remote.c (struct remote_state): Add extended and
multi_process_aware fields.
(remote_multi_process_p): New.
(PACKET_vKill): New.
(record_currthread): Use thread_change_ptid. Notice new
inferiors.
(set_thread, remote_thread_alive): Use write_ptid.
(write_ptid, read_ptid): New.
(remote_current_thread, remote_threads_extra_info): Use them.
(remote_threads_info): Likewise. Detect new inferiors.
(remote_start_remote): Add inferior to inferior list.
(remote_multi_process_feature): New.
(remote_protocol_features): Add "multiprocess" feature.
(remote_query_supported): Pass "multiprocess+" as supported
features.
(remote_open_1): Clear multi_process_aware. Set extended
accordingly.
(remote_detach_1): Detach current process. Use extended packet
format for extended-remote multi-process. Detach process from the
inferior list. Only mourn after printing output.
(extended_remote_attach_1): Add process to the inferior list.
(remote_vcont_resume): Use write_ptid to pass the thread ids.
(remote_wait): Use read_ptid. Implement the extended
multi-process extension format of the 'W' and 'X' reply packets.
Remove exited inferiors from inferior list.
(remote_xfer_memory): Set general thread.
(remote_vkill): New.
(extended_remote_kill): New.
(remote_mourn_1): Discard all inferiors.
(select_new_thread_callback): New.
(extended_remote_mourn_1): If there are more processes to debug,
switch to a thread in another process, and don't pop the target.
(extended_remote_create_inferior_1): Add the new process to the
inferior list.
(remote_stopped_by_watchpoint): Indenting.
(remote_xfer_partial): Set the general thread.
(remote_pid_to_str): If the remote is multi-process aware, print
the process id as well as the thread id.
(remote_get_thread_local_address): Use write_ptid.
(init_extended_remote_ops): Register extended_remote_kill.
(_initialize_remote): Register new packets. Change
magic_null_ptid's, not_sent_ptid's and any_thread_ptid's pid
member to 42000.
* thread.c (thread_change_ptid): Also account for the inferior pid
changing.
* inferior.h (discard_all_inferiors): Declare.
* inferior.c (discard_all_inferiors): New.
2008-08-12 Sandra Loosemore <sandra@codesourcery.com>
* gdb.texinfo (Remote Configuration): Document set remote noack-packet.
(Remote Protocol): Add Packet Acknowledgment to menu.
(Overview): Mention +/- can be disabled, and point to new section
where this is discussed in detail.
(General Query Packets): Document QStartNoAckMode packet, and
corresponding qSupported reply.
(Packet Acknowledgment): New section.
gdb/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
Add no-ack mode to the remote protocol --- optionally stop ACKing
packets and responses when we have a reliable communication
medium.
Based on Apple's GDB, by Jason Molenda <jmolenda@apple.com>
* remote.c (struct remote_state): Add noack_mode field.
(PACKET_QStartNoAckMode): New.
(remote_start_remote): Don't any outstanding packet here.
(remote_open_1): Clear noack_mode. Ack any outstanding packet
here. Activate noack mode if requested.
(remote_protocol_features): Add QStartNoAckMode.
(remote_open_1):
(putpkt_binary): Don't send ack in noack mode.
(read_frame): Don't recompute the checksum in noack mode.
(getpkt_sane): Skip sending ack if in noack mode.
(_initialize_remote): Add set/show remote noack mode.
* NEWS: Note the new features.
gdb/gdbserver/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
* remote-utils.c (noack_mode, transport_is_reliable): New globals.
(remote_open): Set or clear transport_is_reliable.
(putpkt_binary): Don't expect acks in noack mode.
(getpkt): Don't send ack/nac in noack mode.
* server.c (handle_general_set): Handle QStartNoAckMode.
(handle_query): If connected by tcp pass QStartNoAckMode+ in
qSupported.
(main): Reset noack_mode on every connection.
* server.h (noack_mode): Declare.
* infrun.c (resume): In non-stop mode, always resume just one
thread.
(proceed): Don't call prepare_to_proceed in non-stop mode.
(fetch_inferior_event): In non-stop mode, switch context before
handling the event.
(error_is_running, ensure_not_running): New.
(handle_inferior_event): In non-stop mode: Mark only the event
thread as stopped. Require that the target module manages adding
threads to the thread list. Assert that there isn't a
deferred_step_ptid set. Don't switch to infwait_thread_hop_state.
(normal_stop): Only mark not-running if inferior hasn't exited.
In non-stop mode, only mark the event thread.
* thread.c:Include "cli/cli-decode.h".
(print_thread_info): Don't read from a running thread.
Output "(running)" if thread is running.
(switch_to_thread): Don't read stop_pc if thread is executing.
(do_restore_current_thread_cleanup): Don't write to a running
thread.
(thread_apply_all_command): Don't read from a running thread. In
non-stop mode, do a full context-switch instead of just switching
threads.
(thread_apply_command): In non-stop mode, do a full context-switch
instead of just switching threads.
(do_captured_thread_select): Likewise. Inform user if selected
thread is running.
(_initialize_thread): Mark "info threads" and "thread" and
async_ok.
* inf-loop.c (inferior_event_handler): In non-stop mode, don't
unregister the target from the event loop.
* infcmd.c (continue_command, step_1, jump_command)
(signal_command): Ensure the selected thread isn't running.
(interrupt_target_command): In non-stop mode, interrupt only the
selected thread.
* inferior.h (error_is_running, ensure_not_running): Declare.
* target.h (struct target_ops): Add ptid argument to the to_stop
member.
(target_stop): Add ptid_t argument.
* target.c (update_current_target): Add ptid argument to to_stop's
type.
(debug_to_stop): Add ptid_t argument.
(debug_to_rcmd): Set to_stop_ptid.
* remote.c (remote_stop): Add ptid_t argument.
(async_remote_interrupt): Add inferior_ptid to target_stop.
* inf-ptrace.c (inf_ptrace_stop): Add ptid argument.
* Makefile.in (thread.o): Depend on $(cli_decode_h).
* inferior.h (target_executing): Delete.
* gdbthread.h (struct thread_info): Add executing_ field.
(set_executing, is_executing): New.
* thread.c (main_thread_executing): New.
(init_thread_list): Clear it and also main_thread_running.
(is_running): Return false if target has no execution.
(any_running, is_executing, set_executing): New.
* top.c: Include "gdbthread.h".
(target_executing): Delete.
(execute_command): Replace target_executing check by any_running.
* event-top.c: Include "gdbthread.h".
(display_gdb_prompt, command_handler): Replace target_executing by
is_running.
* inf-loop.c: Include "gdbthread.h". Don't mark as not executing
here. Replace target_executing by is_running.
* infrun.c (handle_inferior_event): Mark all threads as
not-executing.
* linux-nat.c (linux_nat_resume): Don't mark thread as executing
here.
* stack.c (get_selected_block): Return null if inferior is
executing.
* target.c (target_resume): Mark resumed ptid as executing.
* breakpoint.c (until_break_command): Replace target_executing
check by is_executing.
* remote.c (remote_async_resume): Don't mark inferior as executing
here.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing
by any_running.
* mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute)
(mi_execute_async_cli_command): Replace target_executing by
is_running.
* frame.c (get_current_frame): Error out if the current thread is
executing.
(has_stack_frames): New.
(get_selected_frame, deprecated_safe_get_selected_frame): Check
has_stack_frames.
* Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on
$(gdbthread_h).
* monitor.c (monitor_open): Include "gdbthread.h". Clear thread
list here.
* remote.c (record_currthread): Upgrade the main thread and its
entry in the thread list if this is the first time we hear about
threads.
(remote_thread_alive): Consider magic_null_ptid or a ptid without
a tid member always alive.
(remote_find_new_threads): Don't update the main thread here.
(remote_start_remote): Clear thread list here. Always add the
main thread.
(extended_remote_attach_1): Add the main thread here.
(extended_remote_mourn_1): Re-add the main thread here.
(extended_remote_create_inferior_1): Add a main thread.
* Makefile.in (monitor.o): Depend on $(gdbthread_h).
* remote.c (magic_null_ptid, not_sent_ptid, any_thread_ptid): New
globals.
(general_thread, continue_thread): Change type to ptid_t.
(record_currthread): Take a ptid_t parameter instead of an
integer.
(MAGIC_NULL_PID): Delete.
(set_thread): Take a ptid_t parameter and adjust.
(set_general_thread, set_continue_thread): New.
(remote_thread_alive, remote_newthread_step)
(remote_current_thread, remote_find_new_threads)
(remote_threads_info, remote_start_remote, remote_vcont_resume)
(remote_resume_1, remote_wait, extended_remote_create_inferior_1)
(threadalive_test, remote_pid_to_str)
(remote_get_thread_local_address): Adjust.
(_initialize_remote): Initialize magic_null_ptid, not_sent_ptid
and any_thread_ptid.
* target.h (struct target_ops): Delete to_async_mask_value and add
to_async_mask.
(target_is_async_p, target_async): Formatting.
(target_async_mask_value): Delete.
(target_async_mask): Delete function declaration, and add new
target macro with the same name.
* target.c (update_current_target): Replace to_async_mask_value by
to_async_mask. Default to_async_mask to return_one.
(target_async_mask): Delete.
(find_default_can_async_p, find_default_is_async_p): New.
(init_dummy_target): register find_default_can_async_p and
find_default_is_async_p on the dummy target.
* linux-nat.c: Include inf-loop.h, event-loop.h and event-top.h.
(debug_linux_nat_async): New global.
(show_debug_linux_nat_async): New function.
(linux_nat_async_enabled, linux_nat_async_mask_value)
(linux_nat_event_pipe, linux_nat_num_queued_events)
(linux_nat_async_events_enabled): New globals.
(struct waitpid_result): New struct.
(waitpid_queue): New global.
(queued_waitpid, push_waitpid, drain_queued_events): New.
(my_waitpid): Call queued_waitpid.
(linux_child_follow_fork): Disable async events during the call.
(blocked_mask): Delete.
(sync_sigchld_action, async_sigchld_action): New globals.
(lin_lwp_attach_lwp): In sync mode, don't reblock SIGCHLD. In
async mode, block events during the call.
(linux_nat_create_inferior): New.
(linux_nat_attach): In sync mode, restore the mask states. In
async mode, wake the event loop immediatelly.
(detach_callback): Drain all queued events of the lwp we're
detaching from.
(linux_nat_detach): Block async mode, and drain events of the main
process.
(linux_nat_resume): If in async mode, mask async events during the
call. If short circuiting, force event loop to wake up. If
resuming, set target_executing, and register target events in the
event loop.
(pipe_to_local_event_queue, local_event_queue_to_pipe): New.
(linux_nat_wait): In async mode, block events during the call.
Only enable/disable passing SIGINT to the inferior in sync mode.
Get events from local waitpid queue. If no interesting events was
found, return to events loop. Reregister target events in the
event loop on exit. In sync mode, no need to reblock SIGCHLD.
(linux_nat_kill): Disable events on entry.
(linux_nat_mourn_inferior): In sync mode, don't restore the masks
here. Detach async mode from the event loop if there are no more
forks available, otherwise leave it on.
(sigchld_handler): Assure this is called only in sync mode.
(linux_async_permitted, linux_async_permitted_1): New globals.
(set_maintenance_linux_async_permitted)
(show_maintenance_linux_async_permitted): New functions.
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_async_mask): New.
(linux_nat_event_pipe_pop, linux_nat_event_pipe_push): New.
(get_pending_events, async_sigchld_handler): New.
(linux_nat_async_events): New.
(async_terminal_is_ours): New global.
(linux_nat_terminal_inferior, linux_nat_terminal_ours): New.
(async_client_callback, async_client_context): New.
(linux_nat_async_file_handler, linux_nat_async)
(linux_nat_disable_async, linux_nat_enable_async): New.
(linux_nat_add_target): Register linux_nat_create_inferior,
linux_nat_can_async_p, linux_nat_is_async_p, linux_nat_async,
linux_nat_async_mask, linux_nat_terminal_inferior and
linux_nat_terminal_ours.
(_initialize_linux_nat): Remove local action variable, and update
code that used it to use sync_sigchld_action. Add new
"lin-lwp-async" debug set/show command. Put the "lin-lwp" debug
set/show command in the maintenance class. Add new "linux-async"
maintenance set/show command. Block SIGCHLD by default. Setup
async_sichld_action, and sync_sigchld_action. Install the default
async mode.
(lin_thread_get_thread_signals): Use a local sigset_t for blocking
the cancel signals.
* linux-thread-db.c (re_check_for_thread_db): New.
(clear_lwpid_callback): Handle TARGET_WAITKIND_IGNORE.
(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
(thread_db_async_mask): New.
(init_thread_db_ops): Register thread_db_can_async_p,
thread_db_is_async_p, thread_db_async and thread_db_async_mask.
* remote.c (remote_async_mask_value): New.
(remote_return_zero): New.
(init_remote_ops): Register remote_return_zero as callbacks of
to_can_async_p and to_is_async_p.
(remote_can_async_p, remote_is_async_p, remote_async): Update to
use remote_async_mask_value.
(remote_async_mask): New.
(init_remote_async_ops): Remove to_async_mask_value setting and
register remote_async_mask as to_async_mask callback in
remote_async_ops.
* Makefile.in (linux-nat.o): Update.
gdb/doc/
* gdb.texinfo (Debugging Output): Document
"set/show debug lin-lwp-async".
(Maintenance Commands): Document "maint set/show linux-async".
* Makefile.in (infcmd.o, inf-loop.o): Update dependencies.
* breakpoint.c (bpstat_do_actions): In async mode,
don't jump to top expecting stop_bpstat to be already
updated.
* event-loop.c (start_event_loop): Call async_enable_stdin
on exception.
* event-top.c (async_enable_stdin): Do nothing if sync_execution
is not set.
(command_handler): Do not setup continuation here.
(command_line_handler_continuation): Move to...
* top.c (command_line_handler_continuation): ... here.
(execute_command): In async mode, register continuation.
Don't check frame's language in running in async mode.
* exceptions.c (throw_exception): Don't do exec_error_cleanups.
* inf-loop.c (complete_execution): Inline into...
(inferior_event_handler): ... here. Clear target_executing before
doing any cleanups. Don't try to show prompt if the target was
resumed.
* infcmd.c (signal_command): Add support for async mode.
(finish_command): Only add continuation if the target was
successfully resumed.
* remote.c (init_async_opts): Register to_get_thread_local_address
handler.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Don't mess
with sync_execution.
* tui/tui-interp.c (tui_command_loop): Call async_enable_stdin
on exception.
* remote.c (deprecated_target_resume_hook)
(deprecated_target_wait_loop_hook): Remove.
(remote_resume): Do not call deprecated_target_resume_hook.
(remote_wait): Do not call deprecated_target_wait_loop_hook.
(remote_async_wait): Likewise.
Daniel Jacobowitz
Pedro Alves
Vladimir Prus
Tom Tromey
Michael Snyder
Paul Pluzhnikov
Ulrich Weigand
Sandra Loosemore
Jonathan Larmour
Doug Evans
Jie Zhang
Joel Brobecker