This patch mostly aims at fixing a GDB build failure on 32bit Solaris
systems (Sparc and x86), due to a recent gnulib update adding the
readlink module. But it might also fix related issues when configuring
with --disable-largefile.
A side-effect of the gnulib readlink module addition is that it caused
largefile support to be added as well, and in particular
gnulib/import/m4/largefile.m4 introduced the following new #define in
gnulib's config.in:
| +/* Number of bits in a file offset, on hosts where this is settable. */
| +#undef _FILE_OFFSET_BITS
When defined to 64, it triggers an issue with procfs.h while trying
to build sparc-sol2-nat.c:
| #if !defined(_LP64) && _FILE_OFFSET_BITS == 64
| #error "Cannot use procfs in the large file compilation environment"
| #endif
As it turns out, this is a fairly familiar problem, and one of
the reasons behind ACX_LARGEFILE having been created. In that macro,
we have some code which disables largefile support on solaris hosts:
| sparc-*-solaris*|i[3-7]86-*-solaris*)
| changequote([,])dnl
| # On native 32bit sparc and ia32 solaris, large-file and procfs support
| # are mutually exclusive; and without procfs support, the bfd/ elf module
| # cannot provide certain routines such as elfcore_write_prpsinfo
| # or elfcore_write_prstatus. So unless the user explicitly requested
| # large-file support through the --enable-largefile switch, disable
| # large-file support in favor of procfs support.
| test "${target}" = "${host}" -a "x$plugins" = xno \
| && : ${enable_largefile="no"}
| ;;
But gnulib ignores this fact, and so tries to determine how to
enable large-file support irrespective of whether we want it or not.
This patch fixes the issue by passing --disable-largefile to gnulib's
configure when large-file support in GDB is disabled. This is done
by first enhancing ACX_CONFIGURE_DIR to allow us to pass extra
arguments to be passed to the configure command, and then by modifying
GDB's configure to pass --disable-largefile if large-file support
is disabled.
gdb/ChangeLog:
* acx_configure_dir.m4 (ACX_CONFIGURE_DIR): Add support for
new "EXTRA-ARGS" parameter.
* configure.ac: If large-file support is disabled in GDB,
pass --disable-largefile to ACX_CONFIGURE_DIR call for "gnulib".
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: If large-file support is disabled in GDBserver,
pass --disable-largefile to ACX_CONFIGURE_DIR call for "gnulib".
* configure: Regenerate.
Tested by rebuilding on sparc-solaris and x86_64-linux (with gdbserver).
This fixes the build failure on sparc-solaris. I also verified in
gnulib's config.log file that we pass --disable-largefile in the solaris
case, while we do not in the GNU/Linux case.
Since readlink module is imported, we can use it unconditionally.
This patch is to remove configure checks and HAVE_READLINK checks in
code. It was mentioned in the patch below
[RFA/commit] gdbserver: return ENOSYS if readlink not supported.
https://sourceware.org/ml/gdb-patches/2012-02/msg00148.html
to use readlink in gdbserver, but we chose something simple at that
moment.
gdb:
2014-11-28 Yao Qi <yao@codesourcery.com>
* configure.ac (AC_CHECK_FUNCS): Remove readlink.
* config.in, configure: Re-generate.
* inf-child.c (inf_child_fileio_readlink): Don't check
HAVE_READLINK is defined.
gdb/gdbserver:
2014-11-28 Yao Qi <yao@codesourcery.com>
* configure.ac(AC_CHECK_FUNCS): Remove readlink.
* config.in, configure: Re-generate.
* hostio.c (handle_unlink): Remove code checking HAVE_READLINK
is defined.
Since gnulib alloca module was imported, we can include alloca.h in
both gdb and gdbserver unconditionally, so this patch adds inclusion
of alloca.h in common-defs.h. This patch also removes AC_FUNC_ALLOCA
in configure.ac because we don't need to check alloca any more.
This patch below is removed in fact.
[RFA/commit] include alloca.h if available.
https://www.sourceware.org/ml/gdb-patches/2010-08/msg00566.html
Since alloca.h is from gnulib now, we don't have to check malloc.h in
configure and include malloc.h in code. This patch also remove them
too.
gdb:
2014-11-21 Yao Qi <yao@codesourcery.com>
* common/common-defs.h: Include alloca.h
* configure.ac: Don't invoke AC_FUNC_ALLOCA.
* configure: Re-generated.
* defs.h: Remove code handling alloca.
* utils.c (gdb_realpath): Don't check HAVE_ALLOCA is defined
or not.
gdb/gdbserver:
2014-11-21 Yao Qi <yao@codesourcery.com>
* configure.ac: Don't invoke AC_FUNC_ALLOCA.
(AC_CHECK_HEADERS): Remove malloc.h.
* configure: Re-generated.
* config.in: Re-generated.
* server.h: Don't include alloca.h and malloc.h.
* gdbreplay.c: Don't check HAVE_ALLOCA_H is defined.
Don't include malloc.h.
This commit creates a new file, common/gdb_setjmp.h, to hold some
portability macros for setjmp/longjmp et al. that are used by the
exceptions subsystem and by the demangler crash catcher.
gdb/ChangeLog:
* common/gdb_setjmp.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_setjmp.h.
* configure.ac: Move sigsetjmp check...
* common/common.m4: ...here.
* configure: Regenerate.
* cp-support.c (SIGJMP_BUF): Delete.
(SIGSETJMP): Likewise.
(SIGLONGJMP): Likewise.
* exceptions.h (gdb_setjmp.h): Include.
(setjmp.h): Do not include.
(EXCEPTIONS_SIGJMP_BUF): Delete.
(EXCEPTIONS_SIGSETJMP): Likewise.
(EXCEPTIONS_SIGLONGJMP): Likewise.
Replace all uses of EXCEPTIONS_SIG* macros with SIG* macros
from gdb_setjmp.h.
* exceptions.c: Likewise.
gdb/gdbserver/ChangeLog:
* config.in: Regenerate.
* configure: Likewise.
This commit moves the inclusion of errno.h to common-defs.h and
removes all other inclusions. Note that prior to this commit
server.h included errno.h protected by "#ifdef HAVE_ERRNO_H".
This protection was added with the Windows CE port, which is
currently broken. Since no other platform needs this, I have
removed the protection and the configury to support it.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include errno.h.
* defs.h: Do not include errno.h.
* ada-typeprint.c: Likewise.
* c-typeprint.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* event-loop.c: Likewise.
* f-typeprint.c: Likewise.
* gnu-nat.c: Likewise.
* go32-nat.c: Likewise.
* i386gnu-nat.c: Likewise.
* m2-typeprint.c: Likewise.
* nat/linux-btrace.c: Likewise.
* p-typeprint.c: Likewise.
* procfs.c: Likewise.
* remote-sim.c: Likewise.
* rs6000-nat.c: Likewise.
* target.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* configure.ac (AC_CHECK_HEADERS): Remove errno.h.
* configure: Regenerate.
* config.in: Likewise.
* server.h: Do not include errno.h.
* event-loop.c: Likewise.
* hostio-errno.c: Likewise.
* linux-low.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
* gdbreplay.c: Unconditionally include errno.h.
The recent libiberty patch caused issues when cross building
gdbserver. The Makefile ends invoking the build machine's "ar"
instead of the --host version:
ar ./libiberty.a \
./regex.o (...)
ar: illegal option -- .
Usage: ar [emulation options] [-]{dmpqrstx}[abcfilNoPsSuvV] [member-name] [count] archive-file file...
ar -M [<mri-script]
The libiberty configure script does probe for and finds an appropriate
AR. However, gdbserver's configure does not probe for AR and
overrides the AR used in the libiberty build by explicitly passing AR
to the sub-builds.
gdb/gdbserver/
2014-06-20 Marcus Shawcroft <marcus.shawcroft@arm.com>
* configure.ac: Invoke. AC_CHECK_TOOL(AR, ar).
* Makefile.in (AR, AR_FLAGS): Define.
* configure: Regenerate.
This builds a libiberty just for gdbserver and arranges for gdbserver
to use it. I've tripped across the lack of libiberty in gdbserver at
least once, and I have seen other threads where it would have been
useful.
2014-06-12 Tom Tromey <tromey@redhat.com>
* debug.c (debug_printf): Remove HAVE_GETTIMEOFDAY checks.
* server.c (monitor_show_help): Remove HAVE_GETTIMEOFDAY check.
(parse_debug_format_options): Likewise.
(gdbserver_usage): Likewise.
* Makefile.in (LIBIBERTY_BUILDDIR, LIBIBERTY): New variables.
(SUBDIRS, REQUIRED_SUBDIRS): Add libiberty.
(gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Depend on and link
against libiberty.
($(LIBGNU)): Depend on libiberty.
(all-lib): Recurse into all subdirs.
(install-only): Invoke "install" target in subdirs.
(vasprintf.o, vsnprintf.o, safe-ctype.o, lbasename.o): Remove
targets.
* configure: Rebuild.
* configure.ac: Add ACX_CONFIGURE_DIR for libiberty. Don't check
for vasprintf, vsnprintf, or gettimeofday.
* configure.srv: Don't add safe-ctype.o or lbasename.o to
srv_tgtobj.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
On GDB release branches, we change $development in gdb/development.sh
to false, in order to build the GDB release without -Werror by default,
thus avoiding harmless compiler warnings from breaking the build of
someone who's only interested in building GDB rather than working
on it.
This patch implements the same strategy for gdbserver, using the exact
same method.
gdb/gdbserver/ChangeLog:
* configure.ac: Only use -Werror by default when DEVELOPMENT
is true.
* configure: Regenerate.
Tested on x86_64-linux, by rebuilding GDBserver first with development
set to true, and then doing it again with development set to false.
Werror was used in the first case, but not in the second.
stdlib.h is universal as well, so there is no need to check for it.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac: Don't check for stdlib.h
* defs.h: Include stdlib.h unconditionally.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac: Don't check for stdlib.h.
* gdbreplay.c: Unconditionally include stdlib.h.
This removes gdb_dirent.h and updates the code to use dirent.h
instead. It also removes the now-useless configure checks.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT.
* common/gdb_dirent.h: Remove.
* common/filestuff.c: Use dirent.h.
* common/linux-osdata.c: Use dirent.h.
(NAMELEN): Define.
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
* linux-fork.c: Use dirent.h
* linux-nat.c: Use dirent.h.
* nto-procfs.c: Use dirent.h.
* procfs.c: Use dirent.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
Now that we are using the gnulib string.h module, we don't need to
check for string.h or strings.h. This removes the last few checks
from the source and from the configure scripts.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* common/common.m4 (GDB_AC_COMMON): Don't check for string.h or
strings.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* server.h: Don't check HAVE_STRING_H.
* gdbreplay.c: Don't check HAVE_STRING_H.
* configure: Rebuild.
It has bothered me for a while that files in common/ use macros
defined via autoconf checks, but rely on each configure.ac doing the
proper checks independently.
This patch introduces common/common.m4 which consolidates the checks
assumed by code in common.
The rule I propose is that if something is needed or used by common,
it should be checked for by common.m4. However, if the check is also
needed by gdb or gdbserver, then it should be duplicated there.
Built and regtested on x86-64 Fedora 18 (though this is hardly the
most strenuous case) and using the Fedora 18 mingw cross compilers. I
also examined the config.in diffs to ensure that symbols did not go
missing.
2013-11-08 Tom Tromey <tromey@redhat.com>
* acinclude.m4: Include common.m4.
* common/common.m4: New file.
* configure, config.in: Rebuild.
* configure.ac: Use GDB_AC_COMMON.
2013-11-08 Tom Tromey <tromey@redhat.com>
* acinclude.m4: Include common.m4, codeset.m4.
* configure, config.in: Rebuild.
* configure.ac: Use GDB_AC_COMMON.
It is possible to have a build of glibc where SYS_perf_event_open is not
defined (because when the glibc was compiled, the syscall did not exist),
but have newer kernel headers installed so that linux/perf_event.h is
available. In this setup, you get a build failure:
./common/linux-btrace.c: In function 'kernel_supports_btrace':
./common/linux-btrace.c:316:23: error: 'SYS_perf_event_open' undeclared (first use in this function)
Update the ifdef check to also see if the syscall is available.
URL: https://bugs.gentoo.org/473522
Reported-by: William Throwe <wtt6@cornell.edu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-07-04 Yao Qi <yao@codesourcery.com>
Revert:
2013-06-27 Yao Qi <yao@codesourcery.com>
* common/create-version.sh: Update comments. Handle the case
that TARGET_ALIAS is empty.
gdb/gdbserver/
2013-07-04 Yao Qi <yao@codesourcery.com>
* Makefile.in (host_alias): Use @host_noncanonical@.
(target_alias): Use @target_noncanonical@.
* configure.ac: Use ACX_NONCANONICAL_TARGET and
ACX_NONCANONICAL_HOST.
* configure: Regenerated.
Revert:
2013-06-28 Mircea Gherzan <mircea.gherzan@intel.com>
* configure.ac (version_host, version_target): Set and AC_SUBST them.
* configure: Rebuild.
* Makefile.in (version_host, version_target): Get from configure.
(version.c): Use $(version_host) and $(version_target).
This factors --enable-libmcheck related bits from GDB's configure.ac
and makes GDBserver use them too. Specifically, the 'development'
global is moved to a separate script to it can be sourced by both GDB
and GDBserver, and the --enable-libmcheck/--disable-libmcheck bits
proper are moved to a new m4 file.
I started out by defining 'development' in the m4 file, but in the end
decided against it, as a separate script has the advantage that
changing it in release branches does not require regenerating
configure, unlike today.
I had also started out by making the new GDB_AC_LIBMCHECK itself
handle the yes/no default fallback depending on release/developement,
but since I had split out 'development' to a separate script, and, GDB
needs the python checks anyway (hence we'd need to do the python
checks in gdb's configure.ac, and pass in a 'default lmcheck yes/no'
parameter to GDB_AC_LIBMCHECK anyway), I ended up keeping
GDB_AC_LIBMCHECK isolated from the 'development' global. IOW, it's
the caller's business to handle it.
Tested on x86_64 Fedora 17. Built GDB and GDBserver with and without
--enable-libmcheck, and observed --enable-libmcheck overrides the
disablement of -lmcheck caused by python supporting threads, and that
GDBserver links with -lmcheck when expected. Also observed that
changing the 'development' global, and issuing "make" triggers a
relink, and '-lmcheck' is included or not from the link accordingly.
gdb/
2013-07-03 Pedro Alves <palves@redhat.com>
* Makefile.in (config.status): Depend on development.sh.
(aclocal_m4_deps): Add libmcheck.m4.
* acinclude.m4: Include libmcheck.m4.
* configure.ac: Source development.sh instead of setting
'development' here. --enable-libmcheck/--disable-libmcheck code
factored out to GDB_AC_LIBMCHECK. Run it.
* development.sh: New file.
* libmcheck.m4: New file.
* configure: Regenerate.
gdb/gdbserver/
2013-07-03 Pedro Alves <palves@redhat.com>
* Makefile.in (config.status): Depend on development.sh.
* acinclude.m4: Include libmcheck.m4.
* configure: Regenerate.
With gnulib's unistd module, we can assume unistd.h is always present, and that
STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO are always defined.
Don't remove unistd.h from GDB's configure.ac, as later tests in the
file use HAVE_UNISTD_H checks.
gdb/
2013-07-01 Pedro Alves <palves@redhat.com>
* defs.h: Don't check HAVE_UNISTD_H before including <unistd.h>.
(STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO): Delete.
* tracepoint.c: Don't check HAVE_UNISTD_H before including
<unistd.h>.
gdb/gdbserver/
2013-07-01 Pedro Alves <palves@redhat.com>
* event-loop.c: Don't check HAVE_UNISTD_H before including
<unistd.h>.
* gdbreplay.c: Likewise.
* remote-utils.c: Likewise.
* server.c: Likewise.
* configure.ac: Don't check for unistd.h.
* configure: Regenerate.
When directly invoking gdb/gdbserver/configure && make, the build will
fail because the $(host_alias) is empty and thus create-version.sh does
not get enough parameters.
The output of gdbserver --version without this patch (built like above):
[...]
This gdbserver was configured as ""
After applying this patch:
[...]
This gdbserver was configured as "x86_64-unknown-linux-gnu"
2013-06-28 Mircea Gherzan <mircea.gherzan@intel.com>
gdbserver:
* configure.ac (version_host, version_target): Set and AC_SUBST
them.
* configure: Rebuild.
* Makefile.in (version_host, version_target): Get from
configure.
(version.c): Use $(version_host) and $(version_target).
Change-Id: Id48240532ad3d624ec78867a6db5ebd4c09583ff
Signed-off-by: Mircea Gherzan <mircea.gherzan@intel.com>
We define the following packets:
Qbtrace:bts enable branch tracing for the current thread
returns "OK" or "Enn"
Qbtrace:off disable branch tracing for the current thread
returns "OK" or "Enn"
qXfer:btrace:read read the full branch trace data for the current thread
gdb/
* target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
* remote.c: Include btrace.h.
(struct btrace_target_info): New struct.
(remote_supports_btrace): New function.
(send_Qbtrace): New function.
(remote_enable_btrace): New function.
(remote_disable_btrace): New function.
(remote_teardown_btrace): New function.
(remote_read_btrace): New function.
(init_remote_ops): Add btrace ops.
(enum <unnamed>): Add btrace packets.
(struct protocol_feature remote_protocol_features[]): Add btrace packets.
(_initialize_remote): Add packet configuration for branch tracing.
gdbserver/
* target.h (struct target_ops): Add btrace ops.
(target_supports_btrace): New macro.
(target_enable_btrace): New macro.
(target_disable_btrace): New macro.
(target_read_btrace): New macro.
* gdbthread.h (struct thread_info): Add btrace field.
* server.c: Include btrace-common.h.
(handle_btrace_general_set): New function.
(handle_btrace_enable): New function.
(handle_btrace_disable): New function.
(handle_general_set): Call handle_btrace_general_set.
(handle_qxfer_btrace): New function.
(struct qxfer qxfer_packets[]): Add btrace entry.
* inferiors.c (remove_thread): Disable btrace.
* linux-low: Include linux-btrace.h.
(linux_low_enable_btrace): New function.
(linux_low_read_btrace): New function.
(linux_target_ops): Add btrace ops.
* configure.srv (i[34567]86-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
(x86_64-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
* configure.ac: Define HAVE_LINUX_BTRACE.
* config.in: Regenerated.
* configure: Regenerated.
ARI fixes: move gdb_wait and gdb_stat headers to common subdirectory.
* gdb_stat.h: Delete. Moved to common directory.
* common/gdb_stat.h: New file.
* gdb_wait.h: Delete. Moved to common directory.
* common/gdb_wait.h: New file.
* Makefile.in (H_FILES_NO_SRC): Adapt to new header
location.
* contrib/ari/gdb_ari.sh (wait.h rule): Adapt to new gdb_wait.h
location.
(stat.h rule): Adapt to new gdb_stat.h location.
* common/linux-osdata.c: Include "gdb_stat.h" header instead of
<sys/stat.h> header.
* common/linux-ptrace.c: Include "gdb_wait.h" header instead of
<sys/wait.h> header.
gdbserver ChangeLog entry:
2012-11-15 Pierre Muller <muller@sourceware.org>
* configure.ac (AC_CHECK_HEADERS): Add wait.h header.
* config.in: Regenerate.
* configure: Regenerate.
* linux-low.c: Use "gdb_stat.h" header instead of <sys/stat.h> header.
Use "gdb_wait.h" header instead of <sys/wait.h> header.
* lynx-low.c: Use "gdb_wait.h" header instead of <sys/wait.h> header.
* remote-utils.c: Use "gdb_stat.h" header instead of <sys/stat.h>
header.
* server.c: Remove HAVE_WAIT_H conditional. Use "gdb_wait.h" header
instead of <sys/wait.h> header.
* spu-low.c: Use "gdb_wait.h" header instead of <sys/wait.h> header.
* common/gdb_string.h: ... here.
* common/vec.h: Remove #ifndef GDBSERVER conditional inclusion of
gdb_string.h and gdb_assert.h.
gdbserver/
* configure.ac: Add check for strstr.
* config.in: Regenerate.
* configure: Regenerate.
* linux-thread-db.c: #include "gdb_vecs.h".
(try_thread_db_load_from_pdir_1): New arg "subdir". All callers
updated.
(try_thread_db_load_from_pdir): New arg "subdir". All callers updated.
(thread_db_load_search): Use a vector to iterate over path elements.
Handle text appearing after "$pdir".
gdbserver/
* Makefile.in (SFILES): Add gdb_vecs.c.
(OBS): Add gdb_vecs.o.
(gdb_vecs_h, host_defs_h): New variables.
(thread-db.o): Add $(gdb_vecs_h) dependency.
(gdb_vecs.o): New rule.
* thread-db.c: #include "gdb_vecs.h".
(thread_db_load_search): Use a vector to iterate over path elements.
Handle text appearing after "$pdir".
This reproduces on the GDBserver side what GDB does when readlink is
not supported.
gdb/gdbserver/ChangeLog:
* configure.ac: Add readlink to AC_CHECK_FUNCS list.
* configure, config.in: Regenerate.
* hostio.c: Provide an alternate implementation if HAVE_READLINK
is not defined.
* infrun.c (disable_randomization): New global variable.
(show_disable_randomization): New function.
(set_disable_randomization): Likewise.
(_initialize_infrun): Install set/show disable-randomization
commands.
* linux-nat.c (disable_randomization): Remove.
(show_disable_randomization): Likewise.
(set_disable_randomization): Likewise.
(_initialize_linux_nat): No longer install set/show
disable-randomization commands here.
(linux_nat_supports_disable_randomization): New function.
(linux_nat_add_target): Install it.
* remote.c (PACKET_QDisableRandomization): New enum value.
(remote_protocol_packets): Support QDisableRandomization.
(_initialize_remote): Likewise.
(remote_supports_disable_randomization): New function.
(init_remote_ops): Install it.
(extended_remote_supports_disable_randomization): New function.
(init_extended_remote_ops): Install it.
(extended_remote_disable_randomization): New function.
(extended_remote_create_inferior_1): Call it.
* target.h (struct target_ops): Add to_supports_disable_randomization.
(target_supports_disable_randomization): Add prototype.
* target.c (target_supports_disable_randomization): New function.
(find_default_supports_disable_randomization): Likewise.
(init_dummy_target): Install it.
doc/
* gdb.texinfo (Starting your Program): "set disable-randomization"
is no longer Linux-specific.
(Remote Configuration): Document "set remote
disable-randomization-packet".
(General Query Packets): Document "QDisableRandomization" packet
and add it to "qSupported" list.
gdbserver/
* configure.ac: Check support for personality routine.
* configure: Regenerate.
* config.in: Likewise.
* linux-low.c: Include <sys/personality.h>.
Define ADDR_NO_RANDOMIZE if necessary.
(linux_create_inferior): Disable address space randomization when
forking inferior, if requested.
(linux_supports_disable_randomization): New function.
(linux_target_ops): Install it.
* server.h (disable_randomization): Declare.
* server.c (disable_randomization): New global variable.
(handle_general_set): Handle QDisableRandomization.
(handle_query): Likewise for qSupported.
(main): Support --disable-randomization and --no-disable-randomization
command line arguments.
* target.h (struct target_ops): Add supports_disable_randomization.
(target_supports_disable_randomization): New macro.
2011-03-09 Yao Qi <yao@codesourcery.com>
Revert:
2011-02-11 Yao Qi <yao@codesourcery.com>
* common/Makefile.in: Add copyright header.
2011-02-11 Yao Qi <yao@codesourcery.com>
* Makefile.in: Remove signals.o from COMMON_OBS. Link
libcommon.a.
* configure.ac: Add common to sub dir.
* configure: Regenerate.
gdb/gdbserver/
2011-03-09 Yao Qi <yao@codesourcery.com>
Revert:
2011-03-04 Yao Qi <yao@codesourcery.com>
* Makefile.in: Remove GNU make feature --directory.
2011-03-05 Yao Qi <yao@codesourcery.com>
* Makefile.in (CLEANDIRS, REQUIRED_SUBDIRS): New variable.
(subdir_do): New make target. Copied from gdb/Makefile.
(maintainer-clean, realclean, distclean, clean): Call corresponding
make targets in common/Makefile.
2011-02-11 Yao Qi <yao@codesourcery.com>
* configure.ac: Call AC_PROG_RANLIB.
* Makefile.in: Remove signals.o from OBS. Link libcommon.a.
* configure: Regenerate.
This patch adds support for powerpc-lynxos.
gdbserver/ChangeLog:
* gdbserver/lynx-low.c, gdbserver/lynx-low.h,
gdbserver/lynx-ppc-low.c: New files.
* Makefile.in (lynx_low_h): New variable.
(lynx-low.o, lynx-ppc-low.o): New rules.
* configure.ac: On LynxOS, link with -lnetinet.
* configure.srv: Add handling of powerpc-*-lynxos* targets.
* configure: regenerate.
vasprintf and vsnprintf are not available on LynxOS, at least not on
version 4.0.0. This patch updates the configury to import them from
libiberty if not available out of the box.
gdbserver/
* Makefile.in (vasprintf.o, vsnprintf.o): New rules.
* configure.ac: Add check for vasprintf and vsnprintf.
* configure, config.in: Regenerate.
* server.h (vasprintf, vsnprintf): Add conditional declarations.
On LynxOS, alloca is defined in allocal.h. This fixes one warning that
occurs when building GDBserver for LynxOS.
gdb/gdbserver/ChangeLog:
* configure.ac: Add configure check for alloca.
* configure, config.in: Regenerate.
* server.h: Include alloca.h if it exists.
* gdbreplay.c: Include alloca.h if it exists.
(WERROR_CFLAGS): New.
(INTERNAL_CFLAGS): Add WERROR_CFLAGS.
* configure.ac: Introduce --enable-werror, which adds -Werror to
the compiler command line. Enabled by default. Disable with
--disable-werror. Add -Wdeclaration-after-statement
Wpointer-arith and -Wformat-nonliteral to warning flags.
* configure: Regenerate.
2009-11-17 Vladimir Prus <vladimir@codesourcery.com>
* Makefile.in (reg-cf.o, reg-cf.c): New targets.
* configure.ac: Check for __mcoldfire__ and set
gdb_cv_m68k_is_coldfire.
* configure.srv: Use gdb_cv_m68k_is_coldfire to select between
reg-cf.o and reg-m68k.o.
* configure: Regenerated.
2009-11-17 Nathan Sidwell <nathan@codesourcery.com>
* regformats/reg-cf.dat: New file.
* configure: Regenerated.
* configure.ac: Add case for srv_qnx and set LIBS accordingly.
* configure.srv (i[34567]86-*-nto*): New target.
* nto-low.c, nto-low.h, nto-x86-low.c: New files.
* remote-utils.c [__QNX__]: Include sys/iomgr.h
(nto_comctrl) [__QNX__]: New function.
(enable_async_io, disable_async_io) [__QNX__]: Call nto_comctrl.
* configure.tgt: Build gdbserver for Cygwin and mingw32.
gdb/gdbserver/
* configure.ac: Check for more headers which are missing on
Windows. Automatically supply -lwsock32 and USE_WIN32API.
* configure.srv: Add Cygwin and mingw32.
* remote-utils.c: Don't include headers unconditionally which
are missing on mingw32. Include <winsock.h> for mingw32.
(remote_open): Adjust for mingw32 support. Flush
standard error after writing to it.
(remote_close, putpkt_binary, input_interrupt, block_async_io)
(unblock_async_io, enable_async_io, disable_async_io)
(readchar, getpkt): Update for Winsock support.
(prepare_resume_reply): Expect a protocol signal number.
* server.c: Disable <sys/wait.h> on mingw32.
(start_inferior): Adjust for mingw32 support. Flush
standard error after writing to it.
(attach_inferior): Likewise. Use protocol signal
numbers.
(main): Skip 'D' packet on mingw32. Use protocol signal numbers
and names.
* win32-i386-low.c: New file.
* Makefile.in (XM_CLIBS): Set.
(gdbserver, gdbreplay): Use $(INTERNAL_CFLAGS).
(win32-i386-low.o): New dependency rule.
* linux-low.c (linux_wait): Use target signal numbers.
* target.h (struct target_ops): Doc fix.
* server.h (target_signal_to_name): New prototype.
* gdbreplay.c: Don't include headers unconditionally which
are missing on mingw32. Include <winsock.h> for mingw32.
(remote_close, remote_open): Adjust for Winsock support.
* configure, config.in: Regenerated.
* gdb_proc_service.h: New file.
* linux-i386-low.c, linux-x86-64-low.c, thread-db.c: Use the
new "gdb_proc_service.h".
* proc-service.c: Likewise.
(ps_pglobal_lookup, ps_pdread, ps_pdwrite): Use psaddr_t.
(ps_lgetfpregs, ps_lsetfpregs): Use a void* argument.
* Makefile.in (gdb_proc_service_h): Updated.
* configure, config.in: Regenerated.
is not available. Define HAVE_PTRACE_GETREGS if it is.
* config.in, configure: Regenerated.
* configure.srv: Set srv_linux_regsets for PowerPC and PowerPC64.
* linux-i386-low.c, linux-m68k-low.c: Update to use
HAVE_PTRACE_GETREGS.
* linux-low.c (regsets_fetch_inferior_registers)
(regsets_store_inferior_registers): Only return 0 if we processed
GENERAL_REGS.
* linux-ppc-low.c (ppc_fill_gregset, target_regsets): New.
* linux-ppc64-low.c (ppc_fill_gregset, target_regsets): New.
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
* gdbserver/acconfig.h: New file.
* gdbserver/i387-fp.c: New file.
* gdbserver/i387-fp.h: New file.
* gdbserver/linux-x86-64.c: New file.
* regformats/reg-x86-64.dat: New file.
* configure.tgt: Add x86_64-*-linux* gdbserver support.
& gdbserver/configure.srv: Add x86_64-*-linux* and regset support.
* gdbserver/configure.in: Add support for regsets.
* gdbserver/config.in: Regenerate.
* gdbserver/configure: Regenerate.
* gdbserver/Makefile.in: Likewise. Add $(linux_low_h).
* gdbserver/linux-low.h: New file.
* gdbserver/linux-low.c: Include "linux-low.h". Add support
for regsets.
* gdbserver/linux-arm-low.c: Include "linux-low.h".
* gdbserver/linux-ia64-low.c: Include "linux-low.h".
* gdbserver/linux-m68k-low.c: Include "linux-low.h".
* gdbserver/linux-mips-low.c: Include "linux-low.h".
* gdbserver/linux-ppc-low.c: Include "linux-low.h".
* gdbserver/linux-sh-low.c: Include "linux-low.h".
* gdbserver/linux-i386-low.c: Include "linux-low.h". Include
"i387-fp.h". Add PTRACE_GETREGS and friends.
* gdbserver/regcache.c (supply_register): New function.
(supply_register_by_name): New function.
(collect_register): New function.
(collect_register_by_name): New function.
* gdbserver/configure.srv: New file.
* gdbserver/configure.in: Use configure.srv instead
of the host/target makefile fragments. Set GDBSERVER_DEPFILES
from it.
* gdbserver/configure: Regenerated.
* gdbserver/terminal.h: New file.
* gdbserver/Makefile.in: Update for configure changes. Remove
more unneeded include paths.
Joel Brobecker
Yao Qi
Gary Benson
Marcus Shawcroft
Tom Tromey
Doug Evans
Mike Frysinger
Pedro Alves
Mircea Gherzan
Markus Metzger
Pierre Muller
Thiago Jung Bauermann
Joel Brobecker
Ulrich Weigand
Kwok Yeung
Nathan Sidwell
gdbadmin
Jan Kratochvil
Maxim Kuvyrkov
Paul Pluzhnikov
Ralf Wildenhues
Aleksandar Ristovski
Joseph Myers
Paolo Bonzini
Daniel Jacobowitz
Steve Ellcey
Mark Kettenis
Andrew Cagney
Kevin Buettner