* configure.ac: Don't crash if pkg-config is not found and guile
wasn't explicitly requested. Use AC_MSG_ERROR instead of AC_ERROR
in guile checks.
* configure: Regenerate.
* configure.ac (libpython checking): Remove all but python.o from
CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
* configure: Regenerate.
* Makefile.in (SFILES): Add extension.c.
(HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
(COMMON_OBS): Add extension.o.
* extension.h: New file.
* extension-priv.h: New file.
* extension.c: New file.
* python/python-internal.h: #include "extension.h".
(gdbpy_auto_load_enabled): Declare.
(gdbpy_apply_val_pretty_printer): Declare.
(gdbpy_apply_frame_filter): Declare.
(gdbpy_preserve_values): Declare.
(gdbpy_breakpoint_cond_says_stop): Declare.
(gdbpy_breakpoint_has_cond): Declare.
(void source_python_script_for_objfile): Delete.
* python/python.c: #include "extension-priv.h".
Delete inclusion of "observer.h".
(extension_language_python): Moved here and renamed from
script_language_python in py-auto-load.c.
Redefined to be of type extension_language_defn.
(python_extension_script_ops): New global.
(python_extension_ops): New global.
(struct python_env): New member previous_active.
(restore_python_env): Call restore_active_ext_lang.
(ensure_python_env): Call set_active_ext_lang.
(gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
New arg extlang.
(gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
New arg extlang.
(gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
New arg extlang.
(gdbpy_eval_from_control_command): Renamed from
eval_python_from_control_command, made static. New arg extlang.
(gdbpy_source_script) Renamed from source_python_script, made static.
New arg extlang.
(gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
result to int. New arg extlang.
(gdbpy_source_objfile_script): Renamed from
source_python_script_for_objfile, made static. New arg extlang.
(gdbpy_start_type_printers): Renamed from start_type_printers, made
static. New args extlang, extlang_printers. Change result type to
"void".
(gdbpy_apply_type_printers): Renamed from apply_type_printers, made
static. New arg extlang. Rename arg printers to extlang_printers
and change type to ext_lang_type_printers *.
(gdbpy_free_type_printers): Renamed from free_type_printers, made
static. Replace argument arg with extlang, extlang_printers.
(!HAVE_PYTHON, eval_python_from_control_command): Delete.
(!HAVE_PYTHON, source_python_script): Delete.
(!HAVE_PYTHON, gdbpy_should_stop): Delete.
(!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
(!HAVE_PYTHON, start_type_printers): Delete.
(!HAVE_PYTHON, apply_type_printers): Delete.
(!HAVE_PYTHON, free_type_printers): Delete.
(_initialize_python): Delete call to observer_attach_before_prompt.
(finalize_python): Set/restore active extension language.
(gdbpy_finish_initialization) Renamed from
finish_python_initialization, made static. New arg extlang.
(gdbpy_initialized): New function.
* python/python.h: #include "extension.h". Delete #include
"value.h", "mi/mi-cmds.h".
(extension_language_python): Declare.
(GDBPY_AUTO_FILE_NAME): Delete.
(enum py_bt_status): Moved to extension.h and renamed to
ext_lang_bt_status.
(enum frame_filter_flags): Moved to extension.h.
(enum py_frame_args): Moved to extension.h and renamed to
ext_lang_frame_args.
(finish_python_initialization): Delete.
(eval_python_from_control_command): Delete.
(source_python_script): Delete.
(apply_val_pretty_printer): Delete.
(apply_frame_filter): Delete.
(preserve_python_values): Delete.
(gdbpy_script_language_defn): Delete.
(gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
(start_type_printers, apply_type_printers, free_type_printers): Delete.
* auto-load.c: #include "extension.h".
(GDB_AUTO_FILE_NAME): Delete.
(auto_load_gdb_scripts_enabled): Make public. New arg extlang.
(script_language_gdb): Delete, moved to extension.c and renamed to
extension_language_gdb.
(source_gdb_script_for_objfile): Delete.
(auto_load_pspace_info): New member unsupported_script_warning_printed.
(loaded_script): Change type of language member to
struct extension_language_defn *.
(init_loaded_scripts_info): Initialize
unsupported_script_warning_printed.
(maybe_add_script): Make static. Change type of language arg to
struct extension_language_defn *.
(clear_section_scripts): Reset unsupported_script_warning_printed.
(auto_load_objfile_script_1): Rewrite to use extension language API.
(auto_load_objfile_script): Make public. Remove support-compiled-in
and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
(source_section_scripts): Rewrite to use extension language API.
(load_auto_scripts_for_objfile): Rewrite to use
auto_load_scripts_for_objfile.
(collect_matching_scripts_data): Change type of language member to
struct extension_language_defn *.
(auto_load_info_scripts): Change type of language arg to
struct extension_language_defn *.
(unsupported_script_warning_print): New function.
(script_not_found_warning_print): Make static.
(_initialize_auto_load): Rewrite construction of scripts-directory
help.
* auto-load.h (struct objfile): Add forward decl.
(struct script_language): Delete.
(struct auto_load_pspace_info): Add forward decl.
(struct extension_language_defn): Add forward decl.
(maybe_add_script): Delete.
(auto_load_objfile_script): Declare.
(script_not_found_warning_print): Delete.
(auto_load_info_scripts): Update prototype.
(auto_load_gdb_scripts_enabled): Declare.
* python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
auto_load_python_scripts_enabled and made public.
(script_language_python): Delete, moved to python.c.
(gdbpy_script_language_defn): Delete.
(info_auto_load_python_scripts): Update to use
extension_language_python.
* breakpoint.c (condition_command): Replace call to
gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
(bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
with call to breakpoint_ext_lang_cond_says_stop.
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
from gdbpy_should_stop. Change result type to enum scr_bp_stop.
New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
(gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
New arg slang.
(local_setattro): Print name of extension language with existing
stop condition.
* valprint.c (val_print, value_print): Update to call
apply_ext_lang_val_pretty_printer.
* cp-valprint.c (cp_print_value): Update call to
apply_ext_lang_val_pretty_printer.
* python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_apply_val_pretty_printer): Renamed from
apply_val_pretty_printer. New arg extlang.
(!HAVE_PYTHON, apply_val_pretty_printer): Delete.
* cli/cli-cmds.c (source_script_from_stream): Rewrite to use
extension language API.
* cli/cli-script.c (execute_control_command): Update to call
eval_ext_lang_from_control_command.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
enum ext_lang_bt_status values. Update call to
apply_ext_lang_frame_filter.
(mi_cmd_stack_list_locals): Ditto.
(mi_cmd_stack_list_args): Ditto.
(mi_cmd_stack_list_variables): Ditto.
* mi/mi-main.c: Delete #include "python/python-internal.h".
Add #include "extension.h".
(mi_cmd_list_features): Replace reference to python internal variable
gdb_python_initialized with call to ext_lang_initialized_p.
* stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
Update to use enum ext_lang_frame_args. Update to call
apply_ext_lang_frame_filter.
* python/py-framefilter.c (extract_sym): Update to use enum
ext_lang_bt_status.
(extract_value, py_print_type, py_print_value): Ditto.
(py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
(py_mi_print_variables, py_print_locals, py_print_args): Ditto.
(py_print_frame): Ditto.
(gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
New arg extlang. Update to use enum ext_lang_bt_status.
* top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
finish_python_initialization. Replace with call to
finish_ext_lang_initialization.
* typeprint.c (do_free_global_table): Update to call
free_ext_lang_type_printers.
(create_global_typedef_table): Update to call
start_ext_lang_type_printers.
(find_global_typedef): Update to call apply_ext_lang_type_printers.
* typeprint.h (struct ext_lang_type_printers): Add forward decl.
(type_print_options): Change type of global_printers from "void *"
to "struct ext_lang_type_printers *".
* value.c (preserve_values): Update to call preserve_ext_lang_values.
* python/py-value.c: Remove #ifdef HAVE_PYTHON.
(gdbpy_preserve_values): Renamed from preserve_python_values.
New arg extlang.
(!HAVE_PYTHON, preserve_python_values): Delete.
* utils.c (quit_flag): Delete, moved to extension.c.
(clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
extension.c.
* eval.c: Delete #include "python/python.h".
* main.c: Delete #include "python/python.h".
* defs.h: Update comment.
testsuite/
* gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
output.
* gdb.gdb/python-interrupts.exp: New file.
gdb/
* configure.ac: Call AM_PROG_INSTALL_STRIP.
* configure: Regenerate.
* aclocal.m4: Regenerate.
* Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
New substituted variables.
(install-strip): New target.
(INSTALL_SCRIPT): New substituted variable.
(FLAGS_TO_PASS): Add it.
(install-only): Use $(INSTALL_SCRIPT) rather than
$(INSTALL_PROGRAM) for gcore.
Avoid false positives if the search pattern "lose" is found in path
descriptions in comments generated by the preprocessor.
See <https://sourceware.org/bugzilla/show_bug.cgi?id=16152>.
gdb/
2013-11-27 Steffen Sledz <sledz@dresearch-fe.de>
* configure.ac: Tighten Cygwin detection check.
* configure: Rebuild.
configure doesn't check for sys/types.h any more, but it still tries
to use the result of the check. This removes that use as well.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac: Remove check of HAVE_SYS_TYPES_H.
We don't use the result of checking for unistd.h, so this removes the
check.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac: Don't check for unistd.h.
stdlib.h is universal as well, so there is no need to check for it.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac: Don't check for stdlib.h
* defs.h: Include stdlib.h unconditionally.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac: Don't check for stdlib.h.
* gdbreplay.c: Unconditionally include stdlib.h.
gdb already unconditionally includes stddef.h in many places.
I think there is no reason to check for its existence.
Also, Zack Weinberg's header file survey agrees:
http://hacks.owlfolio.org/header-survey/
This patch removes the configure check and the inclusion guards.
It also removes a redundant inclusion that I noticed in defs.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't check for stddef.h.
* defs.h: Unconditionally include stddef.h. Remove duplicate
inclusion.
This removes gdb_dirent.h and updates the code to use dirent.h
instead. It also removes the now-useless configure checks.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/common.m4 (GDB_AC_COMMON): Don't use AC_HEADER_DIRENT.
* common/gdb_dirent.h: Remove.
* common/filestuff.c: Use dirent.h.
* common/linux-osdata.c: Use dirent.h.
(NAMELEN): Define.
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
* linux-fork.c: Use dirent.h
* linux-nat.c: Use dirent.h.
* nto-procfs.c: Use dirent.h.
* procfs.c: Use dirent.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* config.in: Rebuild.
* configure: Rebuild.
* configure.ac: Don't use AC_HEADER_DIRENT.
Now that we are using the gnulib string.h module, we don't need to
check for string.h or strings.h. This removes the last few checks
from the source and from the configure scripts.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* common/common.m4 (GDB_AC_COMMON): Don't check for string.h or
strings.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* server.h: Don't check HAVE_STRING_H.
* gdbreplay.c: Don't check HAVE_STRING_H.
* configure: Rebuild.
An earlier patch removed the check for "syscall" since the results
were not used in the C code. However, the result was used, via the
cache variable, elsewhere in configure.
This patch fixes the problem by checking for "syscall" at the point at
which HAVE_TKILL_SYSCALL is defined.
2013-11-11 Tom Tromey <tromey@redhat.com>
* config.in, configure: Rebuild.
* configure.ac (HAVE_TKILL_SYSCALL): Check for "syscall".
Now that the configury needed for the "common" and "target"
directories is in common.m4, some code in gdb's configure.ac is
redundant.
I ran this script after making an "ID" file using mkid:
sed -n 's/^.*\(HAVE_[A-Z0-9_]*\).*$/\1/p' config.in |
while read x; do
echo ===== $x
gid $x | egrep -v '^(testsuite|gnulib|common|target|gdbserver)/'
done
This finds all the spots using HAVE_ defines, and, more importantly,
makes it clear which defines aren't used in the main parts of gdb.
From this I came up with this patch to remove all the unused bits.
There are a few that are subtly used -- for example the configure
script sometimes checks internal configure cache variables, meaning
some checks cannot be removed.
2013-11-08 Tom Tromey <tromey@redhat.com>
* configure, config.in: Rebuild.
* configure.ac: Remove unused configury.
The removal of solib-sunos.c also removed the last user of various
macros defined by configure.
This patch removes the corresponding configure code.
2013-11-08 Tom Tromey <tromey@redhat.com>
* configure, config.in: Rebuild.
* configure.ac: Remove all link.h-related checks.
It has bothered me for a while that files in common/ use macros
defined via autoconf checks, but rely on each configure.ac doing the
proper checks independently.
This patch introduces common/common.m4 which consolidates the checks
assumed by code in common.
The rule I propose is that if something is needed or used by common,
it should be checked for by common.m4. However, if the check is also
needed by gdb or gdbserver, then it should be duplicated there.
Built and regtested on x86-64 Fedora 18 (though this is hardly the
most strenuous case) and using the Fedora 18 mingw cross compilers. I
also examined the config.in diffs to ensure that symbols did not go
missing.
2013-11-08 Tom Tromey <tromey@redhat.com>
* acinclude.m4: Include common.m4.
* common/common.m4: New file.
* configure, config.in: Rebuild.
* configure.ac: Use GDB_AC_COMMON.
2013-11-08 Tom Tromey <tromey@redhat.com>
* acinclude.m4: Include common.m4, codeset.m4.
* configure, config.in: Rebuild.
* configure.ac: Use GDB_AC_COMMON.
Ulrich Weigand <uweigand@de.ibm.com>
* gdb_ptrace.h: Use ptrace64 instead of ptrace if HAVE_PTRACE64
is defined.
* rs6000-nat.c: Check for __ld_info64_ if compiling 64 BIT gdb.
(rs6000_ptrace32): Call ptrace64 instead of ptrace if present.
(rs6000_ptrace64): Call ptace64 instead of ptracex if present.
* configure.ac: Check for ptrace64.
* configure, config.in: Regenerate.
This factors --enable-libmcheck related bits from GDB's configure.ac
and makes GDBserver use them too. Specifically, the 'development'
global is moved to a separate script to it can be sourced by both GDB
and GDBserver, and the --enable-libmcheck/--disable-libmcheck bits
proper are moved to a new m4 file.
I started out by defining 'development' in the m4 file, but in the end
decided against it, as a separate script has the advantage that
changing it in release branches does not require regenerating
configure, unlike today.
I had also started out by making the new GDB_AC_LIBMCHECK itself
handle the yes/no default fallback depending on release/developement,
but since I had split out 'development' to a separate script, and, GDB
needs the python checks anyway (hence we'd need to do the python
checks in gdb's configure.ac, and pass in a 'default lmcheck yes/no'
parameter to GDB_AC_LIBMCHECK anyway), I ended up keeping
GDB_AC_LIBMCHECK isolated from the 'development' global. IOW, it's
the caller's business to handle it.
Tested on x86_64 Fedora 17. Built GDB and GDBserver with and without
--enable-libmcheck, and observed --enable-libmcheck overrides the
disablement of -lmcheck caused by python supporting threads, and that
GDBserver links with -lmcheck when expected. Also observed that
changing the 'development' global, and issuing "make" triggers a
relink, and '-lmcheck' is included or not from the link accordingly.
gdb/
2013-07-03 Pedro Alves <palves@redhat.com>
* Makefile.in (config.status): Depend on development.sh.
(aclocal_m4_deps): Add libmcheck.m4.
* acinclude.m4: Include libmcheck.m4.
* configure.ac: Source development.sh instead of setting
'development' here. --enable-libmcheck/--disable-libmcheck code
factored out to GDB_AC_LIBMCHECK. Run it.
* development.sh: New file.
* libmcheck.m4: New file.
* configure: Regenerate.
gdb/gdbserver/
2013-07-03 Pedro Alves <palves@redhat.com>
* Makefile.in (config.status): Depend on development.sh.
* acinclude.m4: Include libmcheck.m4.
* configure: Regenerate.
This adds -Wold-style-definition to gdb's list of warnings. This
found a couple of spots where "()" was used where "(void)" is more
correct.
Tested by rebuilding on x86-64 Fedora 18.
* configure.ac (build_warnings): Add -Wold-style-definition.
* configure: Rebuild.
* machoread.c (_initialize_machoread): Use "(void)".
* macrocmd.c (macro_inform_no_debuginfo): Fix formatting;
use "(void)".
This adds -Wold-style-declaration to gdb's list of warnings.
It turns out that a few places use "const static" rather than
"static const". The former is deprecated according to the C standard.
Tested by rebuilding with --enable-targets=all on x86-64 Fedora 18.
* configure.ac (build_warnings): Add -Wold-style-declaration.
* configure: Rebuild.
* dsrec.c (make_srec): Use "static const", not "const static".
* h8300-tdep.c (h8300_breakpoint_from_pc): Use "static const",
not "const static".
* mi/mi-parse.c (mi_no_values, mi_simple_values, mi_all_values):
Use "static const", not "const static".
* mn10300-tdep.c (mn10300_breakpoint_from_pc): Use "static const",
not "const static".
* moxie-tdep.c (moxie_breakpoint_from_pc): Use "static const",
not "const static".
* rs6000-tdep.c (rs6000_breakpoint_from_pc): Use "static const",
not "const static".
* v850-tdep.c (v850_breakpoint_from_pc): Use "static const",
not "const static".
(v850_dbtrap_breakpoint_from_pc): Likewise.
* xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Use "static const",
not "const static".
This adds -Wmissing-parameter-type to gdb's list of warnings.
This one doesn't happen to trigger for a --enable-targets=all build on
x86-64 Fedora 18.
* configure.ac (build_warnings): Add -Wmissing-parameter-type.
* configure: Rebuild.
This simplifies the .gdbinit filename selection logic.
We have a GDBINIT_FILENAME define that supposedly configurations would
override, but none do so. Instead, the only configuration that wants
a different file name instead of ".gdbinit", djgpp, does a strcpy over
the gdbinit global array. This means the array needs to be sized, and
the code that does that is doing the usual
'PATH_MAX/FILENAME_MAX/fallback constant/etc.' mess.
Instead of all that, it's much simpler to have configure specificy the
.gdbinit filename. As bonus, we can then make the "gdbinit" global
array const.
gdb/
2013-07-01 Pedro Alves <palves@redhat.com>
* configure.ac (GDBINIT): Define, depending on host.
* go32-nat.c (init_go32_ops): Don't override gdbinit here.
* top.c (PATH_MAX): Delete fallback definition.
(GDBINIT_FILENAME): Delete.
(gdbinit): Reimplement as const char array set to the GDBINIT
string constant.
* top.h (gdbinit): Make const.
Building gdb with --host=i586-pc-msdosdjgpp ends up with:
i586-pc-msdosdjgpp-gcc -g -O2 -I../../src/gdb/config/djgpp -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber -I./../intl -I../../src/gdb/gnulib/import -Ibuild-gnulib/import -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o filestuff.o -MT filestuff.o -MMD -MP -MF .deps/filestuff.Tpo ../../src/gdb/common/filestuff.c
../../src/gdb/common/filestuff.c:38:24: fatal error: sys/socket.h: No such file or directory
There are no sockets on djgpp. This #ifdef's out the bits in the file
that use sockets, depending on whether winsock or sys/socket.h is
available.
As alternative approach, given ser-tcp.c, ser-pipe.c, etc. are split
into separate files, and which to use is selected by configure.ac:
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
... I considered splitting filestuff.c similarly. But I quickly gave
up on the idea, as it looked like a lot more complication over this
approach, for no real gain. Plus, there are uses of these functions
outside the ser*.c framework.
gdbserver's configure.ac is already checking for sys/socket.h.
gdb/
2013-05-23 Pedro Alves <palves@redhat.com>
* common/filestuff.c [USE_WIN32API]: Define HAVE_SOCKETS.
[HAVE_SYS_SOCKET_H]: Define HAVE_SOCKETS.
(socket_mark_cloexec, gdb_socketpair_cloexec, gdb_socket_cloexec):
Only define if HAVE_SOCKETS is defined.
* configure.ac: Check for sys/socket.h.
* config.in, configure: Regenerate.
The routines in sparc-sol-thread used to be SPARC-specific (and
documented as such in the ptrace man page), and therefore hosting them
in a sparc-specific file made sense. However, newer versions of
Solaris now use those callbacks (Solaris 10 Update 10, apparently),
and thus the note about these callbacks being specific to SPARC
was removed.
So this patch deletes sparc-sol-thread.c and moves the code back
inside sol-thread.c.
gdb/ChangeLog:
PR tdep/15420:
* sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs):
New functions, directly copied from sparc-sol-thread.c.
* sparc-sol-thread.c: Delete.
* configure.ac: Remove code handling sparc-solaris-thread.c.
* configure: Regenerate.
This enables -Wpointer-sign by default.
I've checked that --enable-targets=all builds fine with the following
as --host, on x86_64 Fedora 17 --build:
x86_64 GNU/Linux
i386 GNU/Linux
i386 MinGW-w64
i386 msdos/djgpp
OK?
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* configure.ac (build_warnings): Replace -Wno-pointer-sign with
-Wpointer-sign.
* configure: Regenerate.
gdb/doc
2013-04-19 Pedro Alves <palves@redhat.com>
* gdbint.texinfo (Misc Guidelines) <Compiler Warnings>: Replace
-Wno-pointer-sign text with text on -Wpointer-sign.
2013-04-10 Hui Zhu <hui@codesourcery.com>
Yao Qi <yao@codesourcery.com>
* configure.ac: Check libbabeltrace is installed.
* config.in: Regenerate.
* configure: Regenerate.
* Makefile.in (LIBBABELTRACE): New.
(CLIBS): Add LIBBABELTRACE.
* ctf.c: Include "exec.h".
(CTF_EVENT_ID_STATUS, CTF_EVENT_ID_TSV_DEF): New macros.
(CTF_EVENT_ID_TP_DEF, ctf_save_write_int32): New macros.
(ctf_save_metadata_header): Define new type aliases in
metadata.
(ctf_write_header): Define event type "tsv_def" and "tp_def"
in metadata. Start a new faked packet for trace status.
(ctf_write_status): Write trace status to CTF.
(ctf_write_uploaded_tsv): Write TSV to CTF.
(ctf_write_uploaded_tp): Write tracepoint definition to CTF.
(ctf_write_definition_end): End the faked packet.
(ctx, ctf_iter, trace_dirname): New.
(start_pos): New variable.
(ctf_destroy, ctf_open_dir, ctf_open): New.
(SET_INT32_FIELD, SET_ARRAY_FIELD, SET_STRING_FIELD): New
macros.
(ctf_read_tsv, ctf_read_tp, ctf_close, ctf_files_info): New.
(ctf_fetch_registers, ctf_xfer_partial): New.
(ctf_get_trace_state_variable_value): New.
(ctf_get_tpnum_from_frame_event): New.
(ctf_get_traceframe_address): New.
(ctf_trace_find, ctf_has_stack): New.
(ctf_has_registers, ctf_traceframe_info, init_ctf_ops): New.
(ctf_get_trace_status, ctf_read_status): New.
(_initialize_ctf): New.
* tracepoint.c (get_tracepoint_number): New
(get_uploaded_tsv): Remove 'static'.
(struct traceframe_info, trace_regblock_size): Move it to ...
* tracepoint.h: ... here.
(get_tracepoint_number): Declare it.
(get_uploaded_tsv): Declare it.
* NEWS: Mention new configure option.
gdb/doc/
2013-04-10 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Trace Files): Add "target ctf".
gdb/testsuite/
2013-04-10 Yao Qi <yao@codesourcery.com>
* gdb.trace/actions.exp: Save trace data to CTF.
Change to ctf target if GDB supports, read CTF data in ctf
target, and check the actions of tracepoints.
* gdb.trace/while-stepping.exp: Likewise.
* gdb.trace/report.exp: Test GDB saves trace data to CTF
format and read CTF trace file if GDB supports.
* gdb.trace/tstatus.exp: Save trace data to CTF. If ctf
target is supported, change to ctf target, read trace data and
check output of command "tstatus".
* gdb.trace/tsv.exp: Save trace frame to CTF. If GDB supports,
read CTF data by target ctf and call check_tsv.
* configure: Rebuild.
* configure.ac: Add somread.o to the build if BFD has SOM
support.
* somread.c: Include som/aout.h, not syms.h.
(som_symtab_read): Use som_external_symbol_dictionary_record.
Unpack records manually.
(_initialize_somread): Declare.
* configure.ac (CC_HAS_LONG_LONG): Replace by AC_MSG_ERROR.
* defs.h (LONGEST, ULONGEST): Remove conditionalization for
CC_HAS_LONG_LONG.
* dwarf2-frame.c (DW64_CIE_ID): Likewise.
* dwarf2read.c (extract_cu_value): Remove the function.
(create_cus_from_index_list): Make the return type void, inline the
extract_cu_value caller, include new gdb_static_assert.
(create_cus_from_index): Make the return type void, update the function
comment, update the create_cus_from_index_list caller.
(create_signatured_type_table_from_index): Make the return type void,
inline the extract_cu_value caller, include new gdb_static_assert.
(dwarf2_read_index): Update the create_cus_from_index and
create_signatured_type_table_from_index caller.
* printcmd.c (ui_printf): Remove conditionalizations for
CC_HAS_LONG_LONG.
* config.in: Regenerate.
* configure: Regenerate.
gdb/doc/
* gdbint.texinfo (Host Definition): Remove CC_HAS_LONG_LONG.
... and building with GCC.
gdb/ChangeLog:
* configure.ac: Build with -DMS_WIN64 if building with Python
enabled using GCC on amd64-windows.
* configure: Regenerate.
Moving some sparc-specific routines out of sol-thread.c into their
own (new) file.
gdb/ChangeLog:
* sol-thread.c (ps_lgetxregsize, ps_lgetxregs, ps_lsetxregs):
Move these functions to sparc-sol-thread.c.
* sparc-sol-thread.c: New file.
* configure.ac: Add sparc-sol-thread.o to CONFIG_OBS and
sparc-sol-thread.c to CONFIG_SRCS for sparc-solaris native
configurations.
* configure: Regenerate.
Do not enable -lmcheck by default when Python is enabled with
threading support.
* configure.ac: (python_has_threads) New variable, by testing
if WITH_THREAD is defined in Python.h.
Move --enable-lmcheck after --with-python.
Do not enable -lmcheck by default if python_has_threads=yes.
Warn if --enable-lmcheck and python_has_threads=yes.
* configure: Regenerate.
This allows the user to enable this option at configure time if building
a release, or to disable it if building a snapshot.
gdb/ChangeLog:
* configure.ac: Add --enable-lmcheck configure option.
* configure: Regenerate.
Doug Evans