297 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Eli Zaretskii
|
17617f2d36 |
PR gdb/14018 -- avoid "PC register not available" errors.
gdb/windows-nat.c (thread_rec): Don't display a warning when SuspendThread fails with ERROR_ACCESS_DENIED. If SuspendThread fails for any reason, set th->suspended to -1, so that we don't try to resume such a thread. Also, don't return NULL in these cases, to avoid completely ruin the session due to "PC register is not available" error. (do_windows_fetch_inferior_registers): Check errors in GetThreadContext call. (windows_continue): Accept an additional argument KILLED; if not zero, ignore errors in the SetThreadContext call, since the inferior was killed and is shutting down. (windows_resume, get_windows_debug_event) (windows_create_inferior, windows_mourn_inferior) (windows_kill_inferior): All callers of windows_continue changed to adjust to its new calling sequence. |
|
|
Pedro Alves
|
d6b6434614 |
Rename native-only terminal related functions.
Looking at target_terminal_inferior etc. in async mode, I realized that the naming of the terminal_inferior, terminal_ours, etc. functions doesn't really give a clue that they're meant for the native target only. This patch renames them. There's already child_terminal_info using the child_ prefix, and, they're most prominently installed by inf-child.c, so I went with the child_ prefix. I dropped "inferior" from a couple to make the name match the corresponding target method. Tested on x86_64 Fedora 17, and cross built for mingw. I didn't test gnu-nat.c, but I think the change is as obvious as it gets. I grepped the tree looking for other potential spots that would need adjustment but this is all I found. If something breaks, it should be trivial to fix. gdb/ 2014-03-14 Pedro Alves <palves@redhat.com> * inferior.h (terminal_ours_for_output): Rename to ... (child_terminal_ours_for_output): ... this. (terminal_save_ours): Rename to ... (child_terminal_save_ours): ... this. (terminal_ours): Rename to ... (child_terminal_ours): ... this. (terminal_inferior): Rename to ... (child_terminal_inferior): ... this. (terminal_init_inferior): Rename to ... (child_terminal_init_inferior): ... this. (terminal_init_inferior_with_pgrp): Rename to ... (child_terminal_init_inferior_with_pgrp): ... this. * inflow.c (terminal_init_inferior_with_pgrp): Rename to ... (child_terminal_init_with_pgrp): ... this. (terminal_save_ours): Rename to ... (child_terminal_save_ours): ... this. (terminal_init_inferior): Rename to ... (child_terminal_init): ... this. Adjust. (terminal_inferior): Rename to ... (child_terminal_inferior): ... this. (terminal_ours_for_output): Rename to ... (child_terminal_ours_for_output): ... this. Adjust. (terminal_ours): Rename to ... (child_terminal_ours): ... this. (terminal_ours_1): Rename to ... (child_terminal_ours_1): ... this. Adjust. * linux-nat.c (linux_nat_terminal_inferior): Adjust. * windows-nat.c (do_initial_windows_stuff): Adjust. * gnu-nat.c (gnu_terminal_init_inferior): Rename to ... (gnu_terminal_init): ... this. Adjust. (gnu_target): Adjust. * inf-child.c (inf_child_target): Adjust. |
|
|
Pedro Alves
|
51a9c8c5f8 |
Make the windows-nat.c target inherit inf-child.c.
So that all native targets inherit a single "superclass". Target methods that are set to or do the same as inf-child.c's are removed. Tested by cross building on Fedora 17, and then confirming that ./gdb.exe ./gdb.exe -ex "set pagination off" -ex "start" under Wine still works. Also, Joel tested this with Adacore's internal testsuite. gdb/ 2014-03-12 Pedro Alves <palves@redhat.com> * windows-nat.c: Include inf-child.h. (windows_ops): Delete global. (windows_open, windows_prepare_to_store, windows_can_run): Delete methods. (init_windows_ops): Delete function. (windows_target): New function, based on init_windows_ops, but inherit inf_child_target. (_initialize_windows_nat): Use windows_target. Install x86 specific target methods here. |
|
|
Yuanhui Zhang
|
0837c97695 |
Fix a GDB assert failure on windows
A GDB internal error is found on native mingw32 target.
(gdb) run
../../binutils-gdb/gdb/target.c:1483: internal-error:
target_xfer_partial: Assertion `*xfered_len > 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This error was introduced by the following snippet in commit
|
|
|
Joel Brobecker
|
3be75f87b9 |
windows-nat.c: Bring comment back regarding handling of DLL load events.
This patch brings back a comment that got stripped down a bit too much
during a recent change.
gdb/ChangeLog:
* windows-nat.c (handle_unload_dll): Add function documentation.
(do_initial_windows_stuff): Add comment explaining why we wait
until after inferior initialization has finished before
processing all DLLs.
|
|
|
Joel Brobecker
|
47f7ffdb18 |
Simplify windows-nat.c::get_module_name
Now that get_module_name is no longer called for handling DLL events, we can simplify it a bit, knowing that the only use is to get the executable's filename. While doing so, we adjusted the implementation a bit to avoid references to DLLs, renamed it to make its more-targeted usage more explicit, moved it right before the only function that uses it. We also remove the use of hard-coded length for the buffers being used. gdb/ChangeLog: * windows-nat.c (get_module_name): Delete. (windows_get_exec_module_filename): New function, mostly inspired from get_module_name. (windows_pid_to_exec_file): Replace call to get_module_name by call to windows_get_exec_module_filename. |
|
|
Joel Brobecker
|
1cd9feab11 |
Windows: Rely purely on event info when handling DLL load event
When a DLL gets loaded an the debugger gets a debug event about it, the currently implementation in handle_load_dll currently tries to fetch the DLL's name by first iterating over all DLLs known to the system. It should be sufficient to rely on the name provided with the event, however, especially in the situation we are now, where we now know that we're past the statup phase for our inferior. This patch therefore simplifies windows-nat.c::handle_load_dll to only rely on the event's lpImageName. It also updates the function's comment to document the assumption regarding not being during the inferior's startup phase. And while at it, it fixes the function documentation, which was probably unintentionally inherited from another function (perhaps windows_wait). gdb/ChangeLog: * windows-nat.c (handle_load_dll): Rewrite this function's introductory comment. Remove code using get_module_name to get the DLL's name. |
|
|
Joel Brobecker
|
ea39ad355e |
Ignore DLL load/unload events during inferior initialization.
This patch aims at simplifying DLL handling during the inferior
initialization (process creation during the "run", or during an
"attach"). Instead of processing each DLL load event, which is
sometimes incomplete, we ignore these events until the inferior
has completed its startup phase, and then just iterate over all
DLLs via EnumProcessModules.
gdb/ChangeLog:
* windows-nat.c (get_windows_debug_event): Ignore
LOAD_DLL_DEBUG_EVENT and UNLOAD_DLL_DEBUG_EVENT
if windows_initialization_done == 0.
(windows_add_all_dlls): Renames windows_ensure_ntdll_loaded.
Adjust implementation to always load all DLLs.
(do_initial_windows_stuff): Replace call to
windows_ensure_ntdll_loaded by call to windows_add_all_dlls.
|
|
|
Joel Brobecker
|
9506028490 |
Deprecate windows-specific dll-symbols command and aliases
The "dll-symbols" command, specific to native Windows platforms,
gives the impression that the symbols were not loaded, first
because it completes silently, and second because the "info shared"
output does not get updated after the command completes:
(gdb) dll-symbols C:\WINDOWS\syswow64\rpcrt4.dll
(gdb) info shared
From To Syms Read Shared Object Library
[...]
0x77e51000 0x77ee2554 No C:\WINDOWS\system32\rpcrt4.dll
(we exected the "Syms Read" column to read "Yes").
As far as I can tell, the symbols actually do get loaded, but completely
independently from the solib framework, which explains the silent
loading and the fact that the "Syms Read" column does not get updated.
See windows-nat.c::safe_symbol_file_add_stub, which calls symbol_file_add
instead of calling solib_add.
But, aside from the fact that the "Syms Read" status does not get
updated, I also noticed that it does not take into account the DLL's
actual load address when loading its symbols. As a result, I believe
that we get it wrong if the DLL does not get loaded at the prefered
address.
Rather than trying to fix this command, there does not seem to be
a reason other than historical for having Windows-specific commands
which essentially re-implements the "sharedlibrary" command. The
command interface is slightly different (the latter takes a regexp
rather than a plain filename), but it should be just as easy to use
the "sharedlibrary" command, or its "share" alias, as usisng the
"dll-symbols" command. For instance:
(gdb) share rpcrt4.dll
Reading symbols from C:\WINDOWS\system32\rpcrt4.dll...(no debugging symbols found)...done.
Loaded symbols for C:\WINDOWS\system32\rpcrt4.dll
(gdb) info shared
From To Syms Read Shared Object Library
[...]
0x77e51000 0x77ee2554 Yes (*) C:\WINDOWS\system32\rpcrt4.dll
This patch therefore deprecates the "dll-symbols" command, as well
as its two aliases "add-shared-symbol-files" and "assf", with a view
of deleting them as soon as the 7.8 branch gets cut.
gdb/ChangeLog:
* windows-nat.c (_initialize_windows_nat): Deprecate the
"dll-symbols" command. Turn the "add-shared-symbol-files"
and "assf" aliases into commands, and deprecate them as well.
* NEWS: Add entry explaining that "dll-symbols" and its two
aliases are now deprecated.
gdb/doc/ChangeLog:
* gdb.texinfo (Files): Document "add-shared-symbol-files"
and "assf" as being deprecated.
(Cygwin Native): Likewise for "dll-symbols".
(Non-debug DLL Symbols): Remove reference to "dll-symbols"
as a way to force the loading of symbols from a DLL.
|
|
|
Tom Tromey
|
bd7ae0f5ac |
Add target_ops argument to to_get_tib_address
2014-02-19 Tom Tromey <tromey@redhat.com> * windows-nat.c (windows_get_tib_address): Add 'self' argument. * target.h (struct target_ops) <to_get_tib_address>: Add argument. (target_get_tib_address): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_tib_address): Add 'self' argument. |
|
|
Tom Tromey
|
1e6b91a4bf |
Add target_ops argument to to_get_ada_task_ptid
2014-02-19 Tom Tromey <tromey@redhat.com> * windows-nat.c (windows_get_ada_task_ptid): Add 'self' argument. * target.h (struct target_ops) <to_get_ada_task_ptid>: Add argument. (target_get_ada_task_ptid): Add argument. * target.c (update_current_target): Update. (default_get_ada_task_ptid): Add 'self' argument. * sol-thread.c (sol_get_ada_task_ptid): Add 'self' argument. * remote.c (remote_get_ada_task_ptid): Add 'self' argument. * ravenscar-thread.c (ravenscar_get_ada_task_ptid): Add 'self' argument. * linux-thread-db.c (thread_db_get_ada_task_ptid): Add 'self' argument. * inf-ttrace.c (inf_ttrace_get_ada_task_ptid): Add 'self' argument. * dec-thread.c (dec_thread_get_ada_task_ptid): Add 'self' argument. * darwin-nat.c (darwin_get_ada_task_ptid): Add 'self' argument. * aix-thread.c (aix_thread_get_ada_task_ptid): Add 'self' argument. |
|
|
Tom Tromey
|
8dd27370eb |
Add target_ops argument to to_pid_to_exec_file
2014-02-19 Tom Tromey <tromey@redhat.com> * windows-nat.c (windows_pid_to_exec_file): Add 'self' argument. * target.h (struct target_ops) <to_pid_to_exec_file>: Add argument. (target_pid_to_exec_file): Add argument. * target.c (debug_to_pid_to_exec_file): Add argument. (update_current_target): Update. * nbsd-nat.h (nbsd_pid_to_exec_file): Add 'self' argument. * nbsd-nat.c (nbsd_pid_to_exec_file): Add 'self' argument. * linux-nat.c (linux_child_pid_to_exec_file): Add 'self' argument. (linux_handle_extended_wait): Update. * inf-child.c (inf_child_pid_to_exec_file): Add 'self' argument. * fbsd-nat.h (fbsd_pid_to_exec_file): Add 'self' argument. * fbsd-nat.c (fbsd_pid_to_exec_file): Add 'self' argument. * darwin-nat.c (darwin_pid_to_exec_file): Add 'self' argument. |
|
|
Tom Tromey
|
1eab8a48bf |
Add target_ops argument to to_stop
2014-02-19 Tom Tromey <tromey@redhat.com> * windows-nat.c (windows_stop): Add 'self' argument. * target.h (struct target_ops) <to_stop>: Add argument. * target.c (target_stop): Add argument. (debug_to_stop): Add argument. (update_current_target): Update. * remote.c (remote_stop): Add 'self' argument. * remote-sim.c (gdbsim_stop): Add 'self' argument. (gdbsim_cntrl_c): Update. * remote-m32r-sdi.c (m32r_stop): Add 'self' argument. * procfs.c (procfs_stop): Add 'self' argument. * nto-procfs.c (procfs_stop): Add 'self' argument. * monitor.c (monitor_stop): Add 'self' argument. (monitor_open): Update. * linux-nat.c (linux_nat_stop): Add argument. * inf-ptrace.c (inf_ptrace_stop): Add 'self' argument. * gnu-nat.c (gnu_stop): Add 'self' argument. * darwin-nat.c (darwin_stop): Add 'self' argument. |
|
|
Tom Tromey
|
da82bd6b65 |
Add target_ops argument to to_can_run
2014-02-19 Tom Tromey <tromey@redhat.com> * windows-nat.c (windows_can_run): Add 'self' argument. * target.h (struct target_ops) <to_can_run>: Add argument. (target_can_run): Add argument. * target.c (debug_to_can_run): Add argument. (update_current_target): Update. * nto-procfs.c (procfs_can_run): Add 'self' argument. * inf-child.c (inf_child_can_run): Add 'self' argument. * go32-nat.c (go32_can_run): Add 'self' argument. |
|
|
Tom Tromey
|
de90e03d4c |
Add target_ops argument to to_close
2014-02-19 Tom Tromey <tromey@redhat.com> * windows-nat.c (windows_close): Add 'self' argument. * tracepoint.c (tfile_close): Add 'self' argument. * target.h (struct target_ops) <to_close>: Add argument. * target.c (target_close): Add argument. (update_current_target): Update. * remote.c (remote_close): Add 'self' argument. * remote-sim.c (gdbsim_close): Add 'self' argument. * remote-mips.c (mips_close): Add 'self' argument. * remote-m32r-sdi.c (m32r_close): Add 'self' argument. * record-full.c (record_full_close): Add 'self' argument. * record-btrace.c (record_btrace_close): Add 'self' argument. * monitor.h (monitor_close): Add 'self' argument. * monitor.c (monitor_close): Add 'self' argument. * mips-linux-nat.c (mips_linux_close): Add 'self' argument. * linux-nat.c (linux_nat_close): Add argument. * go32-nat.c (go32_close): Add 'self' argument. * exec.c (exec_close_1): Add 'self' argument. * ctf.c (ctf_close): Add 'self' argument. * corelow.c (core_close): Add 'self' argument. (core_close_cleanup): Update. * bsd-uthread.c (bsd_uthread_close): Add 'self' argument. * bsd-kvm.c (bsd_kvm_close): Add 'self' argument. |
|
|
Yao Qi
|
9b409511d0 |
Return target_xfer_status in to_xfer_partial
This patch does the conversion of to_xfer_partial from
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len);
to
enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN. Generally, the return status has three stats,
- TARGET_XFER_OK,
- TARGET_XFER_EOF,
- TARGET_XFER_E_XXXX,
See the comments to them in 'enum target_xfer_status'. Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK". We finally name it TARGET_XFER_EOF.
With this change, GDB core can handle unavailable data in a convenient
way.
The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html
Consider an object/value like this:
0 100 150 200 512
DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III
where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid). Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE. That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out. But, in this scenario, we're interested in
the data at [150,512). The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next. We'd need something like:
get me [0,512) >>>
<<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK
get me [100,512) >>> (**1)
<<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.
get me [150,512) >>>
<<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.
get me [200,512) >>>
<<< no more data, return TARGET_XFER_EOF.
This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target. (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).
Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.
No target implementations to to_xfer_partial adapts this new
interface. The interface still behaves as before.
gdb:
2014-02-11 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_error): Rename to ...
(enum target_xfer_status): ... it. New. All users updated.
(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
New.
(TARGET_XFER_STATUS_ERROR_P): New macro.
(target_xfer_error_to_string): Remove declaration.
(target_xfer_status_to_string): Declare.
(target_xfer_partial_ftype): Adjust it.
(struct target_ops) <to_xfer_partial>: Return
target_xfer_status. Add argument xfered_len. Update
comments.
* target.c (target_xfer_error_to_string): Rename to ...
(target_xfer_status_to_string): ... it. New. All callers
updated.
(target_read_live_memory): Likewise. Call target_xfer_partial
instead of target_read.
(memory_xfer_live_readonly_partial): Return
target_xfer_status. Add argument xfered_len.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1): Likewise.
(memory_xfer_partial): Likewise.
(target_xfer_partial): Likewise. Check *XFERED_LEN is set
properly. Update debug message.
(default_xfer_partial, current_xfer_partial): Likewise.
(target_write_partial): Likewise.
(target_read_partial): Likewise. All callers updated.
(read_whatever_is_readable): Likewise.
(target_write_with_progress): Likewise.
(target_read_alloc_1): Likewise.
* aix-thread.c (aix_thread_xfer_partial): Likewise.
* auxv.c (procfs_xfer_auxv): Likewise.
(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
* bfd-target.c (target_bfd_xfer_partial): Likewise.
* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
* corefile.c (read_memory): Adjust.
* corelow.c (core_xfer_partial): Likewise.
* ctf.c (ctf_xfer_partial): Likewise.
* darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
updated.
(darwin_xfer_partial): Likewise.
* exec.c (section_table_xfer_memory_partial): Likewise. All
callers updated.
(exec_xfer_partial): Likewise.
* exec.h (section_table_xfer_memory_partial): Update
declaration.
* gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
negative.
(gnu_xfer_partial): Likewise.
* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
(ia64_hpux_xfer_solib_got): Likewise.
* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
type of 'partial_len' to ULONGEST.
* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
* linux-nat.c (linux_xfer_siginfo ): Likewise.
(linux_nat_xfer_partial): Likewise.
(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
* monitor.c (monitor_xfer_memory): Likewise.
(monitor_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* record-full.c (record_full_xfer_partial): Likewise.
(record_full_core_xfer_partial): Likewise.
* remote-sim.c (gdbsim_xfer_memory): Likewise.
(gdbsim_xfer_partial): Likewise.
* remote.c (remote_write_bytes_aux): Likewise. All callers
updated.
(remote_write_bytes, remote_read_bytes): Likewise. All
callers updated.
(remote_flash_erase): Likewise. All callers updated.
(remote_write_qxfer): Likewise. All callers updated.
(remote_read_qxfer): Likewise. All callers updated.
(remote_xfer_partial): Likewise.
* rs6000-nat.c (rs6000_xfer_partial): Likewise.
(rs6000_xfer_shared_libraries): Likewise.
* sol-thread.c (sol_thread_xfer_partial): Likewise.
(sol_thread_xfer_partial): Likewise.
* sparc-nat.c (sparc_xfer_wcookie): Likewise.
(sparc_xfer_partial): Likewise.
* spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
updated.
(spu_xfer_partial): Likewise.
* spu-multiarch.c (spu_xfer_partial): Likewise.
* tracepoint.c (tfile_xfer_partial): Likewise.
* windows-nat.c (windows_xfer_memory): Likewise.
(windows_xfer_shared_libraries): Likewise.
(windows_xfer_partial): Likewise.
* valprint.c: Replace 'target_xfer_error' with
'target_xfer_status' in comments.
|
|
|
Yao Qi
|
2ed4b5488f |
Replace -1 with TARGET_XFER_E_IO
Hi, This patch replaces -1 with TARGET_XFER_E_IO in the implementations of to_xfer_partial and their callees. This change is quite mechanical, and makes the next patch shorter. gdb: 2014-02-07 Yao Qi <yao@codesourcery.com> * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO. (ld_so_xfer_auxv): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise. * corelow.c (core_xfer_partial): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * darwin-nat.c (darwin_read_dyld_info): Likewise. (darwin_xfer_partial): Likewise. * exec.c (exec_xfer_partial): Likewise. * gnu-nat.c (gnu_xfer_partial): Likewise. * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise. * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise. * linux-nat.c (linux_xfer_siginfo): Likewise. (linux_proc_xfer_spu): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-full.c (record_full_xfer_partial): Likewise. (record_full_core_xfer_partial): Likewise. * remote-sim.c (gdbsim_xfer_partial): Likewise. * remote.c (remote_write_qxfer): Likewise. (remote_write_qxfer, remote_read_qxfer): Likewise. (remote_xfer_partial): Likewise. * rs6000-nat.c (rs6000_xfer_partial): Likewise. (rs6000_xfer_shared_libraries): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. (spu_xfer_partial): Likewise. * target.c (memory_xfer_partial_1): Likewise. * tracepoint.c (tfile_xfer_partial): Likewise. * windows-nat.c (windows_xfer_shared_libraries): Likewise. (windows_xfer_partial): Likewise. |
|
|
Markus Metzger
|
f32dbf8c79 |
Add target_ops argument to to_prepare_to_store
2013-12-17 Tom Tromey <tromey@redhat.com> * windows-nat.c (windows_prepare_to_store): Add 'self' argument. * target.h (struct target_ops) <to_prepare_to_store>: Add argument. (target_prepare_to_store): Add argument. * target.c (debug_to_prepare_to_store): Add argument. (update_current_target): Update. * remote.c (remote_prepare_to_store): Add 'self' argument. * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument. * remote-mips.c (mips_prepare_to_store): Add 'self' argument. * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument. * record-full.c (record_full_core_prepare_to_store): Add 'self' argument. * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument. * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument. * monitor.c (monitor_prepare_to_store): Add 'self' argument. * inf-child.c (inf_child_prepare_to_store): Add 'self' argument. * go32-nat.c (go32_prepare_to_store): Add 'self' argument. |
|
|
Yao Qi
|
b55e14c72c |
Change to_xfer_partial 'len' type to ULONGEST.
This patch changes to_xfer_partial's len's type to ULONGEST, and adjust its implementations. gdb: 2014-01-14 Yao Qi <yao@codesourcery.com> * target.h (target_xfer_partial_ftype): Update. (struct target_ops) <to_xfer_partial>: Change 'len' type to ULONGEST. * aix-thread.c (aix_thread_xfer_partial): Change type of argument 'len' to ULONGEST. * auxv.c (procfs_xfer_auxv): Likewise. (ld_so_xfer_auxv): Likewise. (memory_xfer_auxv): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise. * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise. * corelow.c (core_xfer_partial): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * darwin-nat.c (darwin_read_write_inferior): Likewise. Use '%u'. (darwin_read_dyld_info): Likewise. (darwin_xfer_partial): Likewise. * exec.c (section_table_xfer_memory_partial): Likewise. (exec_xfer_partial): Likewise. * exec.h (section_table_xfer_memory_partial): Update declaration. * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest instead of plongest. (gnu_xfer_partial): Likewise. * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise. (ia64_hpux_xfer_solib_got): Likewise. (ia64_hpux_xfer_partial): Likewise. * ia64-linux-nat.c (ia64_linux_xfer_partial): * inf-ptrace.c (inf_ptrace_xfer_partial): * inf-ttrace.c (inf_ttrace_xfer_partial): * linux-nat.c (linux_xfer_siginfo): Likewise. (linux_nat_xfer_partial): Likewise. (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise. (linux_nat_xfer_osdata, linux_xfer_partial): Likewise. * monitor.c (monitor_xfer_memory): Likewise. (monitor_xfer_partial): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-full.c (record_full_xfer_partial): Likewise. (record_full_core_xfer_partial): Likewise. * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest instead of plongest. (gdbsim_xfer_partial): Likewise. * remote.c (remote_xfer_partial): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update declaration. * rs6000-nat.c (rs6000_xfer_partial): Likewise. (rs6000_xfer_shared_libraries): Likewise. * sol-thread.c (sol_thread_xfer_partial): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. (sparc_xfer_partial): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. (spu_xfer_partial): Likewise. * spu-multiarch.c (spu_xfer_partial): Likewise. * target.c (target_read_live_memory): Likewise. (memory_xfer_live_readonly_partial): Likewise. (memory_xfer_partial, memory_xfer_partial_1): Likewise. (target_xfer_partial, default_xfer_partial): Likewise. (current_xfer_partial): Likewise. * tracepoint.c (tfile_xfer_partial): Likewise. * windows-nat.c (windows_xfer_memory): Likewise. Call pulongest instead of plongest. (windows_xfer_partial): Likewise. (windows_xfer_shared_libraries): Likewise. |
|
|
Tom Tromey
|
41bf6acad7 |
replace XZALLOC with XCNEW
This replaces XZALLOC with XCNEW and removes XZALLOC. This change is purely mechanical. 2014-01-13 Tom Tromey <tromey@redhat.com> * defs.h (XZALLOC): Remove. * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC. * ada-tasks.c (get_ada_tasks_pspace_data): Likewise. (get_ada_tasks_inferior_data): Likewise. * auto-load.c (get_auto_load_pspace_data): Likewise. * auxv.c (get_auxv_inferior_data): Likewise. * bfd-target.c (target_bfd_reopen): Likewise. * breakpoint.c (get_catch_syscall_inferior_data): Likewise. (deprecated_insert_raw_breakpoint): Likewise. * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise. * corelow.c (core_open): Likewise. * darwin-nat.c (darwin_check_new_threads): Likewise. (darwin_attach_pid): Likewise. * dummy-frame.c (dummy_frame_push): Likewise. * dwarf2-frame.c (dwarf2_frame_cache): Likewise. * dwarf2loc.c (allocate_piece_closure): Likewise. * elfread.c (elf_symfile_segments): Likewise. * eval.c (ptrmath_type_p): Likewise. * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise. * gdbtypes.c (alloc_type_arch): Likewise. (alloc_type_instance): Likewise. * hppa-tdep.c (hppa_gdbarch_init): Likewise. * inf-child.c (inf_child_can_use_agent): Likewise. * inflow.c (get_inflow_inferior_data): Likewise. * infrun.c (save_infcall_suspend_state): Likewise. * jit.c (jit_reader_load): Likewise. (get_jit_objfile_data): Likewise. (get_jit_program_space_data): Likewise. (jit_object_open_impl): Likewise. (jit_symtab_open_impl): Likewise. (jit_block_open_impl): Likewise. (jit_frame_sniffer): Likewise. * linux-fork.c (add_fork): Likewise. * maint.c (make_command_stats_cleanup): Likewise. * objfiles.c (get_objfile_pspace_data): Likewise. * opencl-lang.c (struct lval_closure): Likewise. * osdata.c (osdata_start_osdata): Likewise. * progspace.c (new_address_space): Likewise. (add_program_space): Likewise. * remote-sim.c (get_sim_inferior_data): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * skip.c (Ignore): Likewise. (skip_delete_command): Likewise. * solib-aix.c (get_solib_aix_inferior_data): Likewise. (library_list_start_library): Likewise. (solib_aix_current_sos): Likewise. * solib-darwin.c (get_darwin_info): Likewise. (darwin_current_sos): Likewise. * solib-dsbt.c (get_dsbt_info): Likewise. * solib-ia64-hpux.c (new_so_list): Likewise. (ia64_hpux_get_solib_linkage_addr): Likewise. * solib-spu.c (append_ocl_sos): Likewise. (spu_current_sos): Likewise. * solib-svr4.c (get_svr4_info): Likewise. (svr4_keep_data_in_core): Likewise. (library_list_start_library): Likewise. (svr4_default_sos): Likewise. (svr4_read_so_list): Likewise. * solib-target.c (library_list_start_library): Likewise. (solib_target_current_sos): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * symfile-debug.c (install_symfile_debug_logging): Likewise. * symfile.c (default_symfile_segments): Likewise. * target-descriptions.c (tdesc_data_init): Likewise. (tdesc_create_reg): Likewise. (struct tdesc_type *): Likewise. (tdesc_create_vector): Likewise. (tdesc_set_struct_size): Likewise. (struct tdesc_type *): Likewise. (tdesc_free_feature): Likewise. (tdesc_create_feature): Likewise. * windows-nat.c (windows_add_thread): Likewise. (windows_make_so): Likewise. * xml-support.c (gdb_xml_body_text): Likewise. (gdb_xml_create_parser_and_cleanup): Likewise. (xml_process_xincludes): Likewise. * xml-syscall.c (allocate_syscalls_info): Likewise. (syscall_create_syscall_desc): Likewise. |
|
|
Honggyu Kim
|
e261678878 |
Remove duplicated #include's from GDB
This patch simply removes duplicated #include statements in the gdb/ directory. If there are two duplicated #include statements, this patch keeps the first #include and removes the second. Those duplicates have been found by using the checkincludes.pl tool from the Linux kernel and double checked manually once again if the #include statements are affected by #ifdef macros. 2014-01-06 Honggyu Kim <hong.gyu.kim@lge.com> * ada-lang.c: Remove duplicated include statements. * alphabsd-nat.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64fbsd-nat.c: Ditto. * auto-load.c: Ditto. * ax-gdb.c: Ditto. * breakpoint.c: Ditto. * dbxread.c: Ditto. * fork-child.c: Ditto. * gdb_usleep.c: Ditto. * i386-darwin-tdep.c: Ditto. * i386fbsd-nat.c: Ditto. * infcmd.c: Ditto. * inferior.c: Ditto. * jv-lang.c: Ditto. * linux-nat.c: Ditto. * linux-tdep.c: Ditto. * m68kbsd-nat.c: Ditto. * m68klinux-nat.c: Ditto. * microblaze-tdep.c: Ditto. * mips-linux-tdep.c: Ditto. * mn10300-tdep.c: Ditto. * nto-tdep.c: Ditto. * opencl-lang.c: Ditto. * osdata.c: Ditto. * printcmd.c: Ditto. * regcache.c: Ditto. * remote-m32r-sdi.c: Ditto. * remote.c: Ditto. * symfile.c: Ditto. * symtab.c: Ditto. * tilegx-linux-nat.c: Ditto. * tilegx-tdep.c: Ditto. * tracepoint.c: Ditto. * valops.c: Ditto. * vaxbsd-nat.c: Ditto. * windows-nat.c: Ditto. * xtensa-tdep.c: Ditto. |
|
|
Joel Brobecker
|
ecd75fc8ee | Update Copyright year range in all files maintained by GDB. | |
|
Pierre Muller
|
774f74c220 |
Fix compilation error for cygwin native build.
* windows-nat.c (windows_ensure_ntdll_loaded) [__USEWIDE]:
Call wcstombs.
|
|
|
Joel Brobecker
|
94481b8c8f |
nameless LOAD_DLL_DEBUG_EVENT causes ntdll.dll to be missing
We observed on Windows 2012 that we were unable to unwind past
exception handlers. For instance, with any Ada program raising
an exception that does not get handled:
% gnatmake -g a -bargs -shared
% gdb a
(gdb) start
(gdb) catch exception unhandled
Catchpoint 2: unhandled Ada exceptions
(gdb) c
Catchpoint 2, unhandled CONSTRAINT_ERROR at <__gnat_unhandled_exception> (
e=0x645ff820 <constraint_error>) at s-excdeb.adb:53
53 s-excdeb.adb: No such file or directory.
At this point, we can already see that something went wrong, since
the frame selected by the debugger corresponds to a runtime function
rather than the function in the user code that caused the exception
to be raised (in our case procedure A).
This is further confirmed by the fact that we are unable to unwind
all the way to procedure A:
(gdb) bt
#0 <__gnat_unhandled_exception> (e=0x645ff820 <constraint_error>)
at s-excdeb.adb:53
#1 0x000000006444e9a3 in <__gnat_notify_unhandled_exception> (excep=0x284d2
+0)
at a-exextr.adb:144
#2 0x00000000645f106a in __gnat_personality_imp ()
from C:\[...]\libgnat-7.3.dll
#3 0x000000006144d1b7 in _GCC_specific_handler (ms_exc=0x242fab0,
this_frame=0x242fe60, ms_orig_context=0x242f5c0, ms_disp=0x242ef70,
gcc_per=0x645f0960 <__gnat_personality_imp>)
at ../../../src/libgcc/unwind-seh.c:289
#4 0x00000000645f1211 in __gnat_personality_seh0 ()
from C:\[...]\libgnat-7.3.dll
#5 0x000007fad3879f4d in ?? ()
Backtrace stopped: previous frame inner to this frame (corrupt stack?)
It turns out that the unwinder has been doing its job flawlessly
up until frame #5. The address in frame #5 is correct, but GDB
is not able to associate it with any symbol or unwind record.
And this is because this address is inside ntdll.dll, and when
we received the LOAD_DLL_DEBUG_EVENT for that DLL, the system
was not able to tell us the name of the library, thus causing us
to silently ignoring the event. Because GDB does not know about
ntdll.dll, it is unable to access the unwind information from it.
And because the function at that address does not use a frame
pointer, the unwinding becomes impossible.
This patch helps recovering ntdll.dll at the end of the "run/attach"
phase, simply by trying to locate that specific DLL again.
In terms of our medium to long term planning, it seems to me that
we should be able to simplify the code by ignoring LOAD_DLL_DEBUG_EVENT
during the startup phase, and modify windows_ensure_ntdll_loaded
to then detect and report all shared libraries after we've finished
inferior creation. But for a change just before 7.7 branch creation,
I thought it was safest to just handle ntdll.dll specifically. This
is less intrusive, and ntdll is the only DLL affected by the problem
I know so far.
gdb/ChangeLog:
* windows-nat.c (handle_load_dll): Add comments.
(windows_ensure_ntdll_loaded): New function.
(do_initial_windows_stuff): Use windows_ensure_ntdll_loaded.
Add FIXME comment.
|
|
|
Tom Tromey
|
0e9f083f4c |
remove gdb_string.h
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
|
|
|
Tom Tromey
|
52554a0e32 |
constify to_detach
This patch constifies the target_ops method to_detach. This is a small cleanup, but also, I think, a bug-prevention fix, since gdb already acts as if the "args" argument here was const. In particular, top.c:quit_force calls kill_or_detach via iterate_over_inferiors. kill_or_detach calls target_detach, passing the same argument each time. So, if one of these methods was not const-correct, then kill_or_detach would change its behavior in a strange way. I could not build every target I modified in this patch. I've inspected them all by hand, though. Many targets do not use the "args" parameter; a couple pass it to atoi; and a few pass it on to the to_detach method of the target beneath. The only code that required a real change was in linux-nat.c, and that only needed the introduction of a temporary variable for const-correctness. 2013-11-08 Tom Tromey <tromey@redhat.com> * aix-thread.c (aix_thread_detach): Update. * corelow.c (core_detach): Update. * darwin-nat.c (darwin_detach): Update. * dec-thread.c (dec_thread_detach): Update. * gnu-nat.c (gnu_detach): Update. * go32-nat.c (go32_detach): Update. * inf-ptrace.c (inf_ptrace_detach): Update. * inf-ttrace.c (inf_ttrace_detach): Update. * linux-fork.c (linux_fork_detach): Update. * linux-fork.h (linux_fork_detach): Update. * linux-nat.c (linux_nat_detach): Update. Introduce "tem" local for const-correctness. * linux-thread-db.c (thread_db_detach): Update. * monitor.c (monitor_detach): Update. * nto-procfs.c (procfs_detach): Update. * procfs.c (procfs_detach): Update. * record.c (record_detach): Update. * record.h (record_detach): Update. * remote-m32r-sdi.c (m32r_detach): Update. * remote-mips.c (mips_detach): Update. * remote-sim.c (gdbsim_detach): Update. * remote.c (remote_detach_1, remote_detach) (extended_remote_detach): Update. * sol-thread.c (sol_thread_detach): Update. * target.c (target_detach): Make "args" const. (init_dummy_target): Update. * target.h (struct target_ops) <to_detach>: Make argument const. (target_detach): Likewise. * windows-nat.c (windows_detach): Update. |
|
|
Luis Machado
|
dfd4cc6311 |
* aarch64-linux-nat.c: Replace PIDGET with ptid_get_pid.
Replace TIDGET with ptid_get_lwp. Replace GET_LWP with ptid_get_lwp. * aix-thread.c (BUILD_THREAD, BUILD_LWP): Remove. Replace BUILD_THREAD with ptid_build. Replace BUILD_LWP with ptid_build. Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * alphabsd-nat.c: Replace PIDGET with ptid_get_pid. * amd64-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * amd64bsd-nat.c: Replace PIDGET with ptid_get_pid. * arm-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. Replace GET_LWP with ptid_get_lwp. * armnbsd-nat.c: Replace PIDGET with ptid_get_pid. * auxv.c: Likewise. * breakpoint.c: Likewise. * common/ptid.c (ptid_is_pid): Condense check for null_ptid and minus_one_ptid. (ptid_lwp_p): New function. (ptid_tid_p): New function. * common/ptid.h: Update comments for accessors. (ptid_lwp_p): New prototype. (ptid_tid_p): New prototype. * defs.h (PIDGET, TIDGET, MERGEPID): Do not define. * gcore.c: Replace PIDGET with ptid_get_pid. * gdbthread.h: Likewise. * gnu-nat.c: Likewise. * hppa-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * hppabsd-nat.c: Replace PIDGET with ptid_get_pid. * hppanbsd-nat.c: Likewise. * i386-linux-nat.c: Replace PIDGET with ptid_get_pid. Replace TIDGET with ptid_get_lwp. * i386bsd-nat.c: Replace PIDGET with ptid_get_pid. * ia64-linux-nat.c: Replace PIDGET with ptid_get_pid. * infcmd.c: Likewise. * inferior.h: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Replace PIDGET with ptid_get_pid. Replace GET_PID with ptid_get_pid. Replace is_lwp with ptid_lwp_p. Replace GET_LWP with ptid_get_lwp. Replace BUILD_LWP with ptid_build. |
|
|
Pierre Muller
|
7126d5c82e | Fix small indentation error in last commit | |
|
Pierre Muller
|
9e52adf9c6 |
* windows-nat.c (windows_xfer_memory): Handle ERROR_PARTIAL_COPY
error code. |
|
|
Pierre Muller
|
a238856838 |
* windows-nat.c (windows_xfer_memory): Fix compilation failure
by use of plongest function. |
|
|
Pedro Alves
|
44f3886761 |
windows-nat.c: Don't install a deprecated_xfer_memory method.
This stops another target from installing a target_ops->deprecated_xfer_memory method. Tested on native MinGW. gdb/ 2013-08-27 Pedro Alves <palves@redhat.com> * windows-nat.c (windows_xfer_memory): Adjust prototype to follow xfer_partial's interface. Return TARGET_XFER_E_IO on error. (windows_xfer_partial): Defer TARGET_OBJECT_MEMORY handling to windows_xfer_memory directly. (init_windows_ops): Don't install a deprecated_xfer_memory method. |
|
|
Pedro Alves
|
d8d2a3ee47 |
Normalize on PATH_MAX instead of MAXPATHLEN throughout.
With the pathmax gnulib module in place, we can use PATH_MAX consistently throughout, instead of the current mixbag of PATH_MAX and MAXPATHLEN uses. It's no longer necessary to include sys/param.h (supposedly, I can't check all ports touched here) for MAXPATHLEN. Don't remove sys/param.h from GDB's configure.ac, as later tests in the file use HAVE_SYS_PARAM_H checks. Tested on x86_64 Fedora 17. Also cross-built for --host=i686-w64-mingw32, and --host=i586-pc-msdosdjgpp. gdb/ 2013-07-01 Pedro Alves <palves@redhat.com> * defs.h: Include "pathmax.h". * utils.c: Don't include sys/param.h. (gdb_realpath): Remove code that checks for MAXPATHLEN. * solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX instead of MAXPATHLEN. * solib-sunos.c: Don't include sys/param.h. * xcoffread.c: Don't include sys/param.h. * bsd-kvm.c: Don't include sys/param.h. * darwin-nat.c: Don't include sys/param.h. (darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN. * darwin-nat-info.c: Don't include sys/param.h. * fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN. * i386obsd-nat.c: Don't include sys/param.h. * inf-child.c: Don't include sys/param.h. (inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN. * linux-fork.c: Don't include sys/param.h. (fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN. * linux-nat.c: Don't include sys/param.h. (linux_child_pid_to_exec_file, linux_proc_pending_signals) (linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN. * m68klinux-nat.c: Don't include sys/param.h. * nbsd-nat.c: Don't include sys/param.h. (nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN. * ppc-linux-nat.c: Don't include sys/param.h. * rs6000-nat.c: Don't include sys/param.h. * spu-linux-nat.c. Don't include sys/param.h. * windows-nat.c: Don't include sys/param.h. * xtensa-linux-nat.c: Don't include sys/param.h. * config/i386/nm-fbsd.h: Don't include sys/param.h. gdb/gdbserver/ 2013-07-01 Pedro Alves <palves@redhat.com> * server.h: Include "pathmax.h". * linux-low.c: Don't include sys/param.h. (linux_pid_exe_is_elf_64_file): Use PATH_MAX instead of MAXPATHLEN. * win32-low.c: Don't include sys/param.h. (win32_create_inferior): Use PATH_MAX instead of MAXPATHLEN. |
|
|
Joel Brobecker
|
2212802810 |
windows-nat.c:thread_rec: Add missing empty line after var declaration.
gdb/ChangeLog:
* window-nat.c (thread_rec): Add missing empty line after
local variable declaration.
|
|
|
Joel Brobecker
|
2ed3e00940 |
[windows] Fix accidental change of %u -> %d in SuspendThread warning.
While enhancing the warning printed in when SuspendThread fails,
I accidently changed the format used to print the error code
from %u to %d. This patch reverts it back.
gdb/ChangeLog:
* windows-nat.c (thread_rec): Revert format used to print
error code returned by SuspendThread from %d back to %u.
|
|
|
Joel Brobecker
|
0c3d84be3e |
windows: Prefix thread ID values with "0x" in debug traces
The windows-nat.c debug traces print the thread ID in base 16,
but give no indication of it. So, in a trace like the following...
gdb: kernel event for pid=4816 tid=720 code=CREATE_THREAD_DEBUG_EVENT)
... where tid is "720", it's easy to be confused and think that
the thread ID is 720 rather than 0x720. This patch avoids the
confusion by adding the usual "0x" prefix used for hexadecimal
values.
gdb/ChangeLog:
* windows-nat.c (windows_continue): Add "0x" prefix for thread
ID in debug trace.
(get_windows_debug_event): Likewise, for all debug traces.
|
|
|
Joel Brobecker
|
80e88e1aa2 |
windows: Add thread ID in SuspendThread error warning message.
This patch adds the thread ID to a warning printed when a call to
SuspendThread fails. It will help investigate issues, particularly
when correlated with the various debug traces provided by the
windows-nat module.
For the record, the output has been changed from...
warning: SuspendThread failed. (winerr 6)
... to ...
warning: SuspendThread (tid=0x720) failed. (winerr 6)
gdb/ChangeLog:
* window-nat.c (thread_rec): Add thread ID in SuspendThread
warning message.
|
|
|
Joel Brobecker
|
564eac4292 |
windows_delete_thread: Add missing space in cast expression
gdb/ChangeLog: * windows-nat.c (windows_delete_thread): Add missing space in cast expression. |
|
|
Eli Zaretskii
|
d85c48475f |
Fix reporting of DLL unload events on MS-Windows.
gdb/windows-nat.c (handle_unload_dll): Don't call solib_add for the unloaded DLL, it will be done by handle_solib_event. See http://sourceware.org/ml/gdb-patches/2013-05/msg00713.html for the details. |
|
|
Joel Brobecker
|
a25cd31f61 |
Add missing empty line after var declarations in handle_unload_dll
gdb/ChangeLog:
* windows-nat.c (handle_unload_dll): Add missing empty line.
|
|
|
Eli Zaretskii
|
e0ea48a0d7 |
Announce thread death on MS-Windows.
* windows-nat.c (windows_delete_thread): Accept an additional argument, the thread's exit code, and announce thread death when print_thread_events is non-zero and we are deleting a thread that is not the main thread. (get_windows_debug_event): Pass thread exit code to windows_delete_thread. |
|
|
Eli Zaretskii
|
d9ac066415 |
Unbreak Windows-hosted cross debugger builds.
* windows-nat.c (windows_get_absolute_argv0): Move from here... * mingw-hdep.c (windows_get_absolute_argv0): ...to here. Include main.h. * windows-nat.h (windows_get_absolute_argv0): Move prototype from here... * main.h (windows_get_absolute_argv0): ...to here. |
|
|
Pierre Muller
|
40653b3568 |
* windows-nat.c (handle_output_debug_string): Avoid typecast
from integer of different size warning. |
|
|
Joel Brobecker
|
c62fa0e267 |
windows-nat.c: Add empty line after local block variable definitions.
gdb/ChangeLog:
* windows-nat.c (handle_output_debug_string): Add empty line
after local block variable definition.
|
|
|
Eli Zaretskii
|
b5981e5adf |
Fix relocation of directories in the MinGW build.
windows-nat.c (windows_get_absolute_argv0): New function. windows-nat.h: Add its prototype. main.c (get_init_files): Use filename_ncmp instead of strncmp. Use IS_DIR_SEPARATOR instead of looking for a character inside SLASH_STRING. Include filenames.h. (captured_main) [__MINGW32__]: Make argv[0] absolute, so that relocate_gdb_directory works when passed gdb_program_name. Include windows-nat.h. |
|
|
Jan Kratochvil
|
460014f572 |
gdb/
Code cleanup. * bfd-target.c (target_bfd_xclose): Remove parameter quitting. * bsd-kvm.c (bsd_kvm_close): Likewise. * bsd-uthread.c (bsd_uthread_close): Likewise. * corelow.c (core_close): Likewise. (core_close_cleanup): Remove parameter quitting from a caller. * event-top.c (async_disconnect): Likewise. * exec.c (exec_close_1): Remove parameter quitting. * go32-nat.c (go32_close): Likewise. * linux-nat.c (linux_nat_close): Remove parameter quitting. Remove parameter quitting from a caller. * mips-linux-nat.c (super_close): Remove parameter quitting from the variable. (mips_linux_close): Remove parameter quitting. Remove parameter quitting from a caller. * monitor.c (monitor_close): Remove parameter quitting. * monitor.h (monitor_close): Likewise. * record-btrace.c (record_btrace_close): Likewise. * record-full.c (record_full_close): Likewise. * remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove it also from fprintf_unfiltered. * remote-mips.c (mips_close): Remove parameter quitting. (mips_detach): Remove parameter quitting from a caller. * remote-sim.c (gdbsim_close): Remove parameter quitting. (gdbsim_close): Remove duplicate function comment. Remove parameter quitting and remove it also from printf_filtered. * remote.c (remote_close): Remove parameter quitting. * solib-svr4.c (enable_break): Remove parameter quitting from a caller. * target.c (update_current_target): Remove parameter int from to_close de_fault. (push_target, unpush_target, pop_target): Remove parameter quitting from a caller. (pop_all_targets_above, pop_all_targets): Remove parameter quitting. Remove parameter quitting from a caller. (target_preopen): Remove parameter quitting from a caller. (target_close): Remove parameter quitting. Remove parameter quitting from a caller two times. Remove parameter quitting also from fprintf_unfiltered. * target.h (struct target_ops): Remove parameter quitting and as int from fields to_xclose and to_close. (extern struct target_ops current_target): (target_close, pop_all_targets): Remove parameter quitting. Update the comment. (pop_all_targets_above): Remove parameter quitting. * top.c (quit_target): Remove parameter quitting from a caller. * tracepoint.c (tfile_close): Remove parameter quitting. * windows-nat.c (windows_close): Remove parameter quitting. |
|
|
Corinna Vinschen
|
35a7120b8c |
* windows-nat.c (handle_output_debug_string): Replace call
to string_to_core_addr with call to strtoull. |
|
|
Corinna Vinschen
|
2c15ef432f |
* windows-nat.c (handle_output_debug_string): Change type of n to
SIZE_T to avoid crash on 64 bit systems. |
|
|
Corinna Vinschen
|
d50a0ce273 |
* windows-nat.c: Throughout, fix format strings and casts of
printf-like functions to avoid type related warnings on all platforms. (handle_output_debug_string): Fetch context information address from debug string using string_to_core_addr. |
|
|
Kai Tietz
|
42f45f1a89 |
* windows-nat.c (windows_xfer_memory): Fix debug-output
for LLP64. |
|
|
Pedro Alves
|
26cb8b7c1a |
[native x86 GNU/Linux] Access debug register mirror from the corresponding process.
While reviewing the native AArch64 patch, I noticed a problem:
On 02/06/2013 08:46 PM, Pedro Alves wrote:
>
>> > +static void
>> > +aarch64_linux_prepare_to_resume (struct lwp_info *lwp)
>> > +{
>> > + struct arch_lwp_info *info = lwp->arch_private;
>> > +
>> > + /* NULL means this is the main thread still going through the shell,
>> > + or, no watchpoint has been set yet. In that case, there's
>> > + nothing to do. */
>> > + if (info == NULL)
>> > + return;
>> > +
>> > + if (DR_HAS_CHANGED (info->dr_changed_bp)
>> > + || DR_HAS_CHANGED (info->dr_changed_wp))
>> > + {
>> > + int tid = GET_LWP (lwp->ptid);
>> > + struct aarch64_debug_reg_state *state = aarch64_get_debug_reg_state ();
> Hmm. This is always fetching the debug_reg_state of
> the current inferior, but may not be the inferior of lwp.
> I see the same bug on x86. Sorry about that. I'll fix it.
A natural fix would be to make xxx_get_debug_reg_state take an
inferior argument, but that doesn't work because of the case where we
detach breakpoints/watchpoints from the child fork, at a time there's
no inferior for the child fork at all. We do a nasty hack in
i386_inferior_data_get, but that relies on all callers pointing the
current inferior to the correct inferior, which isn't actually being
done by all callers, and I don't think we want to enforce that -- deep
in the bowls of linux-nat.c, there are many cases we resume lwps
behind the scenes, and it's be better to not have that code rely on
global state (as it doesn't today).
The fix is to decouple the watchpoints code from inferiors, making it
track target processes instead. This way, we can freely keep track of
the watchpoint mirrors for these processes behind the core's back.
Checkpoints also play dirty tricks with swapping the process behind
the inferior, so they get special treatment too in the patch (which
just amounts to calling a new hook). Instead of the old hack in
i386_inferior_data_get, where we returned a copy of the current
inferior's debug registers mirror, as soon as we detect a fork in the
target, we copy the debug register mirror from the parent to the child
process.
I don't have an old kernel handy to test, but I stepped through gdb doing
the watchpoint removal in the fork child in the watchpoint-fork test
seeing that the debug registers end up cleared in the child.
I didn't find the need for linux_nat_iterate_watchpoint_lwps. If
we use plain iterate_over_lwps instead, what happens is that
when removing watchpoints, that iterate_over_lwps doesn't actually
iterate over anything, since the fork child is not added to the
lwp list until later, at detach time, in linux_child_follow_fork.
And if we don't iterate over that lwp, we don't mark its debug
registers as needing update. But linux_child_follow_fork takes
care of doing that explicitly:
child_lp = add_lwp (inferior_ptid);
child_lp->stopped = 1;
child_lp->last_resume_kind = resume_stop;
make_cleanup (delete_lwp_cleanup, child_lp);
/* CHILD_LP has new PID, therefore linux_nat_new_thread is not called for it.
See i386_inferior_data_get for the Linux kernel specifics.
Ensure linux_nat_prepare_to_resume will reset the hardware debug
registers. It is done by the linux_nat_new_thread call, which is
being skipped in add_lwp above for the first lwp of a pid. */
gdb_assert (num_lwps (GET_PID (child_lp->ptid)) == 1);
if (linux_nat_new_thread != NULL)
linux_nat_new_thread (child_lp);
if (linux_nat_prepare_to_resume != NULL)
linux_nat_prepare_to_resume (child_lp);
ptrace (PTRACE_DETACH, child_pid, 0, 0);
so unless I'm missing something (quite possible) it ends up all
the same. But, the !detach-on-fork, and the "follow-fork child" paths
should also call linux_nat_new_thread, and they don't presently. It
seems to me in those cases we're not clearing debug regs correctly
when that's needed. Instead of copying that bit that works around
add_lwp bypassing the linux_nat_new_thread call, I thought it'd
be better to add an add_initial_lwp call to be used in the case we
really need to bypass linux_nat_new_thread, and make
add_lwp always call linux_nat_new_thread.
i386_cleanup_dregs is rewritten to forget about the current process
debug mirrors, which takes cares of other i386 ports. Only a couple
of extra tweaks here and there were needed, as some targets wheren't
actually calling i386_cleanup_dregs.
Tested on Fedora 17 x86_64 -m64/-m32.
GDBserver already fetches the i386_debug_reg_state from the right
process, and, it doesn't handle forks at all, so no fix is needed over
there.
gdb/
2013-02-13 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (update_debug_registers_callback):
Update comment.
(amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
iterate_over_lwps.
(amd64_linux_prepare_to_resume): Pass the lwp's pid to
i386_debug_reg_state.
(amd64_linux_new_fork): New function.
(_initialize_amd64_linux_nat): Install amd64_linux_new_fork as
linux_nat_new_fork hook, and i386_forget_process as
linux_nat_forget_process hook.
* i386-linux-nat.c (update_debug_registers_callback):
Update comment.
(amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
iterate_over_lwps.
(i386_linux_prepare_to_resume): Pass the lwp's pid to
i386_debug_reg_state.
(i386_linux_new_fork): New function.
(_initialize_i386_linux_nat): Install i386_linux_new_fork as
linux_nat_new_fork hook, and i386_forget_process as
linux_nat_forget_process hook.
* i386-nat.c (i386_init_dregs): Delete.
(i386_inferior_data, struct i386_inferior_data):
Delete.
(struct i386_process_info): New.
(i386_process_list): New global.
(i386_find_process_pid, i386_add_process, i386_process_info_get):
New functions.
(i386_inferior_data_get): Delete.
(i386_process_info_get): New function.
(i386_debug_reg_state): New parameter 'pid'. Reimplement.
(i386_forget_process): New function.
(i386_cleanup_dregs): Rewrite.
(i386_update_inferior_debug_regs, i386_insert_watchpoint)
(i386_remove_watchpoint, i386_region_ok_for_watchpoint)
(i386_stopped_data_address, i386_insert_hw_breakpoint)
(i386_remove_hw_breakpoint): Adjust to pass the current process id
to i386_debug_reg_state.
(i386_use_watchpoints): Don't register inferior data.
* i386-nat.h (i386_debug_reg_state): Add new 'pid' parameter, and
adjust comment.
(i386_forget_process): Declare.
* linux-fork.c (delete_fork): Call linux_nat_forget_process.
* linux-nat.c (linux_nat_new_fork, linux_nat_forget_process_hook):
New static globals.
(linux_child_follow_fork): Don't call linux_nat_new_thread here.
(add_initial_lwp): New, factored out from ...
(add_lwp): ... this. Don't check the number of lwps before
calling linux_nat_new_thread.
(linux_nat_iterate_watchpoint_lwps): Delete.
(linux_nat_attach): Use add_initial_lwp instead of add_lwp.
(linux_handle_extended_wait): Call the linux_nat_new_fork hook on
forks and vforks.
(linux_nat_wait_1): Use add_initial_lwp instead of add_lwp for the
initial lwp.
(linux_nat_kill, linux_nat_mourn_inferior): Call
linux_nat_forget_process.
(linux_nat_set_new_fork, linux_nat_set_forget_process)
(linux_nat_forget_process): New functions.
* linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): Delete
type.
(linux_nat_iterate_watchpoint_lwps): Delete declaration.
(linux_nat_new_fork_ftype, linux_nat_forget_process_ftype): New
types.
(linux_nat_set_new_fork, linux_nat_set_forget_process)
(linux_nat_forget_process): New declarations.
* amd64fbsd-nat.c (super_mourn_inferior): New global.
(amd64fbsd_mourn_inferior): New function.
(_initialize_amd64fbsd_nat): Override to_mourn_inferior.
* windows-nat.c (windows_detach): Call i386_cleanup_dregs.
|