2015-12-16 Mickael Guene <mickael.guene@st.com>
bfd/
* bfd-in2.h: Regenerate.
* reloc.c: Add new relocations.
* libbfd.h (bfd_reloc_code_real_names): Add new relocations
display names.
* elf32-arm.c (elf32_arm_howto_table_1): Add HOWTO for new
relocations.
(elf32_arm_reloc_map): Add bfd/arm mapping for new relocations.
(elf32_arm_final_link_relocate): Implement new relocations
resolution.
gas/
* doc/c-arm.texi: Add documentation about new directives
* config/tc-arm.c (group_reloc_table): Add mapping between gas
syntax and new relocations.
(do_t_add_sub): Keep new relocations for add operand.
(do_t_mov_cmp): Keep new relocations for mov operand.
(insns): Use 'shifter operand with possible group relocation'
operand parse code for movs operand.
(md_apply_fix): Implement mov and add encoding when new
relocations on them.
(tc_gen_reloc): Add new relocations.
(arm_fix_adjustable): Since offset has a limited range ([0:255])
we disable adjust_reloc_syms() for new relocations.
gas/testsuite/
* gas/arm/adds-thumb1-reloc-local.d: New
* gas/arm/adds-thumb1-reloc-local.s: New
* gas/arm/movs-thumb1-reloc-local.d: New
* gas/arm/movs-thumb1-reloc-local.s: New
include/
* elf/arm.h: Add new arm relocations.
ld/testsuite/
* ld-arm/arm-elf.exp (armelftests_common): Add new relocations
tests.
* ld-arm/thumb1-adds.d: New
* ld-arm/thumb1-adds.s: New
* ld-arm/thumb1-movs.d: New
* ld-arm/thumb1-movs.s: New
To support thumb1 execute-only code we need to support four new
relocations (R_ARM_THM_ALU_ABS_G0_NC, R_ARM_THM_ALU_ABS_G1_NC,
R_ARM_THM_ALU_ABS_G2_NC and R_ARM_THM_ALU_ABS_G3_NC).
These relocations allow the static linker to finalize construction
of symbol address.
Typical sequence of code to get address of the symbol foo is then
the following :
movs r3, #:upper8_15:#foo
lsls r3, #8
adds r3, #:upper0_7:#foo
lsls r3, #8
adds r3, #:lower8_15:#foo
lsls r3, #8
adds r3, #:lower0_7:#foo
This will give following sequence of text and relocations after
assembly :
4: 2300 movs r3, #0
4: R_ARM_THM_ALU_ABS_G3_NC foo
6: 021b lsls r3, r3, #8
8: 3300 adds r3, #0
8: R_ARM_THM_ALU_ABS_G2_NC foo
a: 021b lsls r3, r3, #8
c: 3300 adds r3, #0
c: R_ARM_THM_ALU_ABS_G1_NC foo
e: 021b lsls r3, r3, #8
10: 3300 adds r3, #0
10: R_ARM_THM_ALU_ABS_G0_NC foo
The re-writing logic in _bfd_coff_final_link() overwrote the ".file"
part of the symbol table entry, due to not coping with the auxiliary
entry generated in all cases.
Note that while I would have wanted to add a test case,
(a) I didn't spot any one testing the base functionality here, and
(b) I wasn't able to figure out proper conditionals to use in e.g.
ld-elf/elf.exp to check for the necessary PE/PE+ support (which
varies by target).
Various fixes to linker relaxation. In general, we need to support
relaxing every branch, even if we don't relax it in the assembler,
so we can optionally defer relaxation to the linker.
* elf32-rl78.c (rl78_offset_for_reloc): Add more relocs.
(rl78_elf_relax_section): Add bc/bz/bnc/bnz/bh/bnh. Fix reloc
choices.
* config/rl78-parse.y: Make all branches relaxable via
rl78_linkrelax_branch().
* config/tc-rl78.c (rl78_linkrelax_branch): Mark all relaxable
branches with relocs.
(options): Add OPTION_NORELAX.
(md_longopts): Add -mnorelax.
(md_parse_option): Support OPTION_NORELAX.
(op_type_T): Add bh, sk, call, and br.
(rl78_opcode_type): Likewise.
(rl78_relax_frag): Fix not-relaxing logic. Add sk.
(md_convert_frag): Fix relocation handling.
(tc_gen_reloc): Strip relax relocs when not linker relaxing.
(md_apply_fix): Defer overflow handling for anything that needs a
PLT, to the linker.
* config/tc-rl78.h (TC_FORCE_RELOCATION): Force all relocations to
the linker when linker relaxing.
* doc/c-rl78.texi (norelax): Add.
* elf32-rx.c (elf32_rx_relax_delete_bytes): Add extra parameter -
the start of the relocs for the section. Delete code to load in
the relocs.
(elf32_rx_relax_section): Do not free the loaded relocs.
This fixes some cases where the linker would incorrectly error on plt
relocs to local ifunc symbols. I've also tidied plt and ifunc
handling for ppc64, where check_relocs was allowing for the
possibility of plt calls via addr14/addr24 relocs but relocate_section
was not.
* elf32-ppc.c (ppc_elf_check_relocs): Don't error on local ifunc
plt call. Wrap long lines.
(ppc_elf_relocate_section): Wrap long lines.
* elf64-ppc.c (ppc64_elf_check_relocs): Don't error on local ifunc
plt calls. Move __tls_get_addr checks later. Don't create plt
for addr14/addr24 relocs.
(ppc64_elf_gc_sweep_hook): Adjust to suit check_relocs changes.
(ppc64_elf_relocate_section): Correct local ifunc handling for
PLT64, PLT32 and PLT16 relocs.
On 32-bit targets, memory requested for program/section headers on a
fuzzed binary can wrap to 0. A bfd_alloc of zero bytes actually
returns a one byte allocation rather than a NULL pointer. This then
leads to buffer overflows.
Making this check unconditional triggers an extremely annoying gcc-5
warning.
PR19323
* elfcode.h (elf_object_p): Check for ridiculous e_shnum and
e_phnum values.
Add a new relocation that marks large-model entry code, for edit back
to medium-model.
include/elf/
* ppc64.h (R_PPC64_ENTRY): Define.
bfd/
* reloc.c (BFD_RELOC_PPC64_ENTRY): New.
* elf64-ppc.c (reloc_howto_type ppc64_elf_howto_raw): Add
entry for R_PPC64_ENTRY.
(LD_R2_0R12, ADD_R2_R2_R12, LIS_R2, ADDIS_R2_R12): Define.
(ppc64_elf_reloc_type_lookup): Handle R_PPC64_ENTRY.
(ppc64_elf_relocate_section): Edit code at R_PPC64_ENTTY. Use
new insn defines.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
Linker can't optimize R_386_GOT32 and R_386_GOT32X relocations if addend
isn't 0. It isn't valid to convert
movl foo@GOT+1(%ecx), %eax
to
leal foo@GOTOFF+1(%ecx), %eax
nor to convert
movq foo@GOTPCREL+1(%rip), %rax
to
leaq foo(%rip), %rax
for x86-64. We should check if addend is 0 before optimizing R_386_GOT32
and R_386_GOT32X relocations. Testcases are added for i386 and x86-64.
bfd/
* elf32-i386.c (elf_i386_convert_load): Skip if addend isn't 0.
(elf_i386_relocate_section): Skip R_386_GOT32X optimization if
addend isn't 0.
ld/testsuite/
* ld-i386/i386.exp: Run mov2a, mov2b and mov3.
* ld-i386/mov2.s: New file.
* ld-i386/mov2a.d: Likewise.
* ld-i386/mov2b.d: Likewise.
* ld-i386/mov3.d: Likewise.
* ld-i386/mov3.s: Likewise.
* ld-x86-64/mov2.s: Likewise.
* ld-x86-64/mov2a.d: Likewise.
* ld-x86-64/mov2b.d: Likewise.
* ld-x86-64/mov2c.d: Likewise.
* ld-x86-64/mov2d.d: Likewise.
* ld-x86-64/x86-64.exp: Run mov2a, mov2b, mov2c and mov2d.
In this case the inlined function doesn't have DW_AT_linkage_name in
.debug_info, but the language is C++ so find_nearest_line goes looking
in the symbol table. Since the function is inlined the enclosing
non-inline function symbol is returned from _bfd_elf_find_function,
which is wrong. This patch only uses a symbol if its address matches.
PR binutils/19315
* dwarf2.c (_bfd_elf_find_function): Return symbol matched.
(_bfd_dwarf2_find_nearest_line): Check symbol returned above
against dwarf range.
* elf-bfd.h (_bfd_elf_find_function): Update prototype.
Fixes a segfault in ppc64_elf_tls_optimize found when testing
R_PPC64_ENTRY, and potential for trouble in other places found by
code inspection.
* elf64-ppc.c (ppc64_elf_tls_optimize): Don't segfault on NULL
symbol section or output section.
(ppc64_elf_edit_toc): Similarly for ld -R objects.
(ppc64_elf_size_stubs): Likewise.
Symbol defined by a linker assignment may have type bfd_link_hash_new
or bfd_link_hash_undefined. And h->def_regular is always set.
elf_i386_convert_load and elf_x86_64_convert_load should check
h->def_regular as well as bfd_link_hash_undefined and bfd_link_hash_new
to see if a symbol is defined by a linker script.
bfd/
PR ld/19319
* elf32-i386.c (elf_i386_convert_load): Check h->def_regular
instead of bfd_link_hash_new.
* elf64-x86-64.c (elf_x86_64_convert_load): Likewise. Skip
relocation overflow for bfd_link_hash_undefined and
bfd_link_hash_new if h->def_regular is set.
ld/testsuite/
PR ld/19319
* ld-i386/i386.exp: Run pr19319 test.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pr19319.dd: New file.
* ld-i386/pr19319a.S: Likewise.
* ld-i386/pr19319b.S: Likewise.
* ld-x86-64/pr19319.dd: Likewise.
* ld-x86-64/pr19319a.S: Likewise.
* ld-x86-64/pr19319b.S: Likewise.
info->traditional_format is available, or can be easily made
available. This relegates BFD_TRADITIONAL_FORMAT to AOUT use only.
* coff-rs6000.c (_bfd_xcoff_put_symbol_name): Replace abfd param
with info param. Test info->traditional_format rather than
BFD_TRADITIONAL_FORMAT flag.
* coff64-rs6000.c (_bfd_xcoff64_put_symbol_name): Likewise.
* libxcoff.h (struct xcoff_backend_data_rec): Update
_xcoff_put_symbol_name prototype.
(bfd_xcoff_put_symbol_name): Add info param.
* xcofflink.c (xcoff_find_tc0): Update bfd_xcoff_put_symbol_name call.
(xcoff_write_global_symbol): Likewise.
(xcoff_link_input_bfd): Test info->traditional_format rather than
BFD_TRADITIONAL_FORMAT flag.
* cofflink.c (_bfd_coff_final_link): Likewise.
(_bfd_coff_link_input_bfd, _bfd_coff_write_global_sym): Likewise.
* elf32-arc.c (ARC_ELF_HOWTO): Delete.
(arc_elf_howto): New function.
(bfd_elf32_bfd_reloc_type_lookup): Use it in place of existing
init code.
(bfd_elf32_bfd_reloc_name_lookup): Use arc_elf_howto.
(arc_info_to_howto_rel, elf_arc_relocate_section): Likwise.
(elf_arc_check_relocs): Likewise.
This initialises howto.dst_mask so that relocations in debug sections
are applied by the generic reloc processing used by objdump to display
debug sections.
* elf32-arc.c (arc_elf_howto_init): Init dst_mask.
GDB Administrator
H.J. Lu
Nick Clifton
Christophe Lyon
Mickael Guene
Jan Beulich
Sandra Loosemore
DJ Delorie
Alan Modra
Kaz Kojima
Tristan Gingold