The re-writing logic in _bfd_coff_final_link() overwrote the ".file"
part of the symbol table entry, due to not coping with the auxiliary
entry generated in all cases.
Note that while I would have wanted to add a test case,
(a) I didn't spot any one testing the base functionality here, and
(b) I wasn't able to figure out proper conditionals to use in e.g.
ld-elf/elf.exp to check for the necessary PE/PE+ support (which
varies by target).
These were the BFD changes needed for building a C++ GDB with
--enable-targets=all, on x86_64 Fedora 20.
For libbfd.h and libcoff.h, this does same as already done when
generating bfd.h: open extern "C" in the -in.h header, and close it
from the Makefile.
bfd/doc/ChangeLog:
2015-02-11 Pedro Alves <palves@redhat.com>
* Makefile.am (libbfd.h, libcoff.h): Close extern "C" scope.
* Makefile.in: Regenerate.
bfd/ChangeLog:
2015-02-11 Pedro Alves <palves@redhat.com>
* libbfd-in.h [__cplusplus]: Open extern "C" scope.
* libcoff-in.h [__cplusplus]: Open extern "C" scope.
* libbfd.h: Regenerate.
* libcoff.h: Regenerate.
* elf-bfd.h [__cplusplus]: Wrap in extern "C".
* mach-o.h [__cplusplus]: Wrap in extern "C".
* som.h [__cplusplus]: Wrap in extern "C".
PR binutils/17512
* objdump.c (slurp_symtab): Fail gracefully if the table could not
be read.
(dump_relocs_in_section): Likewise.
* aoutx.h (slurp_symbol_table): Check that computed table size is
not bigger than the file from which is it being read.
(slurp_reloc_table): Likewise.
* coffcode.h (coff_slurp_line_table): Remove unneeded local
'warned'. Do not try to print the details of a symbol with an
invalid index.
* coffgen.c (make_a_sectiobn_from_file): Check computed string
index against length of string table.
(bfd_coff_internal_syment_name): Check read in string offset
against length of string table.
(build_debug_section): Return a pointer to the section used.
(_bfd_coff_read_string_table): Store the length of the string
table in the coff_tdata structure.
(bfd_coff_free_symbols): Set the length of the string table to
zero when it is freed.
(coff_get_normalized_symtab): Check offsets against string table
or data table lengths as appropriate.
* cofflink.c (_bfd_coff_link_input_bfd): Check offset against
length of string table.
* compress.c (bfd_get_full_section_contents): Check computed size
against the size of the file.
* libcoff-in.h (obj_coff_strings_len): Define.
(struct coff_tdata): Add strings_len field.
* libcoff.h: Regenerate.
* peXXigen.c (pe_print_debugdata): Do not attempt to print the
data if the debug section is too small.
* xcofflink.c (xcoff_link_input_bfd): Check offset against
length of string table.
CODE_FRAGMENT. Also fix skip_past_newline to not skip past NUL.
* bfd-in2.h: Regenerate.
* libcoff.h: Regenerate.
doc/
* chew.c (skip_past_newline_1): New function.
(outputdots): Call it.
(skip_past_newline): Ditto.
bfd/
* peicode.h (pe_ILF_object_p): Adjust, as the version number
has been read.
(pe_bfd_object_p): Also read version number to detect ILF.
* pe-x86_64.c (COFF_WITH_PE_BIGOBJ): Define.
(x86_64pe_bigobj_vec): Define
* coffcode.h (bfd_coff_backend_data): Add _bfd_coff_max_nscns field.
(bfd_coff_max_nscns): New macro.
(coff_compute_section_file_positions): Use unsigned int for
target_index. Compare with bfd_coff_max_nscns.
(bfd_coff_std_swap_table, ticoff0_swap_table, ticoff1_swap_table):
Set a value for _bfd_coff_max_nscns.
(header_bigobj_classid): New constant.
(coff_bigobj_swap_filehdr_in, coff_bigobj_swap_filehdr_out)
(coff_bigobj_swap_sym_in, coff_bigobj_swap_sym_out)
(coff_bigobj_swap_aux_in, coff_bigobj_swap_aux_out): New
functions.
(bigobj_swap_table): New table.
* libcoff.h: Regenerate.
* coff-sh.c (bfd_coff_small_swap_table): Likewise.
* coff-alpha.c (alpha_ecoff_backend_data): Add value for
_bfd_coff_max_nscns.
* coff-mips.c (mips_ecoff_backend_data): Likewise.
* coff-rs6000.c (bfd_xcoff_backend_data)
(bfd_pmac_xcoff_backend_data): Likewise.
* coff64-rs6000.c (bfd_xcoff_backend_data)
(bfd_xcoff_aix5_backend_data): Likewise.
* targets.c (x86_64pe_bigobj_vec): Declare.
* configure.in (x86_64pe_bigobj_vec): New vector.
* configure: Regenerate.
* config.bfd: Add bigobj object format for Windows targets.
gas/
* config/tc-i386.c (use_big_obj): Declare.
(OPTION_MBIG_OBJ): Define.
(md_longopts): Add -mbig-obj option.
(md_parse_option): Handle it.
(md_show_usage): Display help for this option.
(i386_target_format): Use bigobj for x86-64 if -mbig-obj.
* doc/c-i386.texi: Document the option.
gas/testsuite/
* gas/pe/big-obj.d, gas/pe/big-obj.s: Add test.
* gas/pe/pe.exp: Add test.
include/coff/
* pe.h (struct external_ANON_OBJECT_HEADER_BIGOBJ): Declare.
(FILHSZ_BIGOBJ): Define.
(struct external_SYMBOL_EX): Declare.
(SYMENT_BIGOBJ, SYMESZ_BIGOBJ): Define.
(union external_AUX_SYMBOL_EX): Declare.
(AUXENT_BIGOBJ, AUXESZ_BIGOBJ): Define.
* internal.h (struct internal_filehdr): Change type
of f_nscns.
output deterministic. time.h include is no longer needed.
* resres.c (res_append_resource): Likewise.
* pe-dll.c (fill_edata): Only use a real timestamp if
--insert-timestamp was used.
* emultempl/pe.em: Add the --insert-timestamp option.
* emultempl/pep.em: Likewise for 64bit.
* ld.texinfo: Document the --insert-timestamp option.
* libcoff-in.h: Add insert_timestamp flag to the pe_data struct.
* libcoff.h: Regenerate.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Only use a real
timestamp if --insert-timestamp was used.
2012-10-18 Kai Tietz <ktietz@redhat.com>
PR binutils/14067
* coff-i386.c (bfd_target): Add section flag SEC_EXCLUDE.
Allow BFD_COMPRESS and BFD_DECOMPRESS flags.
* coff-x86_64.c: Likewise.
* coffcode.h (DOT_ZDEBUG): New define.
(sec_to_styp_flags): Check for .zdebug.
(styp_to_sec_flags): Likewise.
* coffgen.c (make_a_section): Handle .debug_* section
compression/decompression flags.
* cofflink.c (mark_relocs): Ignore relocations
for a section, which isn't marked as used.
(_bfd_coff_link_input_bfd): Add support of compressed
debug sections.
* compress.c (decompress_contents): Loop as long
as there is input available and there is room for
output.
* bfd/pe-arm.c: Add .zdebug_ partial match entry.
* pe-i386.c: Likewise.
* pe-x86_64.c: Likewise.
* peXXigen.c (_bfd_XXi_swap_aouthdr_out): Don't clear all
data-directories as this might destroy content.
* coff-i386.c (_bfd_generic_find_nearest_line_discriminator):
define as coff_find_nearest_line_discriminator.
* libcoff-in.h (coff_find_nearest_line_discriminator): New
* libcoff.h: Regenerated.
* coff-x86_64.c: Likewise.
* coffgen.c (coff_find_nearest_line_discriminator): New function.
prototype.
ChangeLog binutils
2012-10-18 Kai Tietz <ktietz@redhat.com>
* objdump.c (dump_bfd): Call dump headers after
call of slurp_symtab.
ChangeLog ld
2012-10-18 Kai Tietz <ktietz@redhat.com>
PR binutils/14067
* NEWS: Menition new feature.
* scripttempl/pep.sc: Add zdebug sections.
* scripttempl/pe.sc: L
(where relocatable objects are in ELF format) so far led to all local (aka
static) symbols to be discarded, making debugging quite a bit more difficult
(like Linux, Xen builds an internal symbol lookup table from nm output
generated on the binary produced by an earlier linking pass). Therefore, this
patch arranges to insert all (relevant) local symbols from non-COFF objects
into the final executable's symbol table between those coming from COFF input
files and the global ones.
bfd/
2011-11-02 Jan Beulich <jbeulich@suse.com>
* coffgen.c (coff_write_alien_symbol): Make public. Add 'struct
internal_syment *' parameter. Extend 'dummy' to an array with two
elements. Set n_numaux early. Handle BSF_FILE.
(coff_write_symbols): Pass NULL as new third argument to
coff_write_alien_symbol().
* cofflink.c (_bfd_coff_final_link): Don't use COFF-specific
obj_raw_syment_count() on non-COFF input BFD. Insert local symbols
from non-COFF input BFDs.
* libcoff-in.h (coff_write_alien_symbol): Declare.
* libcoff.h (coff_write_alien_symbol): Re-generate.
2010-03-18 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/11396
* libcoff-in.h (pe_tdata): Add dont_strip_reloc.
* libcoff.h: Regenerated.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Clear F_RELFLG
if dont_strip_reloc is set.
(_bfd_XX_bfd_copy_private_bfd_data_common): Set
dont_strip_reloc on output if there is no .reloc and
IMAGE_FILE_RELOCS_STRIPPED isn't set in input.
(record_thumb_to_arm_glue, bfd_arm_process_before_allocation):
Change member name class to symbol_class.
* bfd/coff-i960.c (coff_i960_relocate_section) Rename variable
class to class_val. Change member name class to symbol_class.
* bfd/coff-rs6000.c (_bfd_xcoff_swap_aux_in)
(_bfd_xcoff_swap_aux_out): Rename arguments class to in_class.
* bfd/coff-stgo32.c (adjust_aux_in_post)
(adjust_aux_out_pre, adjust_aux_out_post): Rename arguments class
to in_class.
* bfd/coff64-rs6000.c (_bfd_xcoff64_swap_aux_in)
(_bfd_xcoff64_swap_aux_out): Rename arguments class to in_class.
* bfd/coffcode.h (coff_pointerize_aux_hook): Rename variable class
to n_sclass.
* bfd/coffgen.c (coff_write_symbol, coff_pointerize_aux): Rename
variables named class to n_sclass. (coff_write_symbols): Rename
variable class to sym_class. (bfd_coff_set_symbol_class): Rename
argument class to symbol_class.
* bfd/cofflink.c (_bfd_coff_link_hash_newfunc)
(coff_link_add_symbols, _bfd_coff_link_input_bfd)
(_bfd_coff_write_global_sym, _bfd_coff_generic_relocate_section):
Update code to use renamed members.
* bfd/coffswap.h (coff_swap_aux_in, coff_swap_aux_out): Rename
argument class to in_class.
* bfd/libcoff-in.h (struct coff_link_hash_entry, struct
coff_debug_merge_type) Renamed members class to symbol_class and
type_class.
* bfd/libcoff.h Regenerated.
* bfd/peXXigen.c: (_bfd_XXi_swap_aux_in, _bfd_XXi_swap_aux_out):
Rename argument class to in_class.
* bfd/pef.c (bfd_pef_parse_imported_symbol): Update code to use
renamed members.
* bfd/pef.h (struct bfd_pef_imported_symbol): Changed name of
member class to symbol_class.
* binutils/ieee.c (ieee_read_cxx_misc, ieee_read_cxx_class)
(ieee_read_reference): Rename variables named class to cxxclass.
* gas/config/tc-arc.c (struct syntax_classes): Rename member class
to s_class. (arc_extinst): Rename variable class to
s_class. Update code to use renamed members.
* gas/config/tc-mips.c (insn_uses_reg): Rename argument class to
regclass.
* gas/config/tc-ppc.c (ppc_csect, ppc_change_csect, ppc_function)
(ppc_tc, ppc_is_toc_sym, ppc_symbol_new_hook, ppc_frob_label)
(ppc_fix_adjustable, md_apply_fix): Update code to use renamed
members.
* gas/config/tc-ppc.h (struct ppc_tc_sy): Change name of member
from class to symbol_class. (OBJ_COPY_SYMBOL_ATTRIBUTES): Update
code to use renamed members.
* gas/config/tc-score.c (s3_adjust_paritybit): Rename argument
class to i_class.
* gas/config/tc-score7.c (s7_adjust_paritybit): Rename argument
class to i_class.
* gprof/corefile.c (core_create_function_syms): Rename variable
class to cxxclass.
* include/coff/ti.h (GET_LNSZ_SIZE, PUT_LNSZ_SIZE): Updated name
of class variable to in_class to match changes in function that
use this macro.
* include/opcode/ia64.h (struct ia64_operand): Renamed member
class to op_class
* ld/emultempl/elf32.em (gld${EMULATION_NAME}_load_symbols)
(gld${EMULATION_NAME}_try_needed): Rename variable class to
link_class
* opcodes/ia64-dis.c (print_insn_ia64): Update code to use renamed
member.
* opcodes/m88k-dis.c (m88kdis): Rename variable class to in_class.
* opcodes/tic80-opc.c (tic80_symbol_to_value)
(tic80_value_to_symbol): Rename argument class to symbol_class.
Stop using bfd_usrdata in libbfd.
* coff-stgo32.c (bfd_coff_go32stub): Remove.
(stub_bytes, comment): Replace STUBSIZE by GO32_STUBSIZE.
(adjust_filehdr_in_post): Declare the abfd parameter as unused.
Replace STUBSIZE by GO32_STUBSIZE. Save now the stub in
filehdr_dst->u.go32.stub. New comment with the reason.
(adjust_filehdr_out_pre): Replace STUBSIZE by GO32_STUBSIZE.
Substitute the removed macro bfd_coff_go32stub.
(adjust_filehdr_out_post, adjust_scnhdr_in_post, adjust_scnhdr_out_pre)
(adjust_scnhdr_out_post, adjust_aux_in_post, adjust_aux_out_pre)
(adjust_aux_out_post): Replace STUBSIZE by GO32_STUBSIZE.
(create_go32_stub, go32_stubbed_coff_bfd_copy_private_bfd_data):
Replace STUBSIZE by GO32_STUBSIZE. Substitute the removed macro
bfd_coff_go32stub.
* coffcode.h (coff_mkobject_hook): Initialize coff->go32stub.
* libcoff-in.h (coff_data_type): New field go32stub.
* libcoff.h: Regenerated.
include/coff/
Stop using bfd_usrdata in libbfd.
* go32exe.h (struct external_filehdr_go32_exe <stub>, FILHSZ): Replace
STUBSIZE by GO32_STUBSIZE.
(STUBSIZE): Move the definition ...
* internal.h (GO32_STUBSIZE): ... here and rename it.
(struct internal_filehdr <go32stub>, F_GO32STUB): New.
* libcoff-in.h (xcoff_tdata): Add a lineno_counts field.
* libcoff.h: Regenerate.
* xcofflink.c (xcoff_link_add_symbols): Record per-symbol
line-number counts in the bfd's lineno_counts field.
Don't keep per-csect line-number counts.
(xcoff_sweep): Don't update per-csect line-number counts.
(bfd_xcoff_size_dynamic_sections): Count the number of line-number
entries in each output section.
(xcoff_link_input_bfd): Get the number of line numbers from
the bfd's lineno_counts field, rather than recalculating it
from scratch. Fix the range check when updating C_BINCL and
C_EINCL symbols.
(_bfd_xcoff_bfd_final_link): Don't count the output line numbers
here. Don't expect csects to have line-number counts.
ld/testsuite/
* ld-powerpc/aix-lineno-1.s, ld-powerpc/aix-lineno-1.txt,
ld-powerpc/aix-lineno-1a.dd, ld-powerpc/aix-lineno-1a.nd,
ld-powerpc/aix-lineno-1b.dd, ld-powerpc/aix-lineno-1b.nd: New tests.
* ld-powerpc/aix52.exp: Run them. Copy aix-lineno-1.txt to tmpdir.
* libcoff-in.h (xcoff_tdata): Change debug_indices to a signed long.
* libcoff.h: Regenerate.
* xcofflink.c (xcoff_keep_symbol_p): New function, using the
"skip" logic from xcoff_link_input_bfd.
(bfd_xcoff_size_dynamic_sections): Explicitly skip dynamic
objects in a dynamic link, rather than checking whether csectpp
is null. Always allocate debug_index for other objects,
and always go through the loop. Update the type of debug_index
after the change above. Read the auxillary csect information
and use xcoff_keep_symbol_p to decide whether a symbol should
be kept. Set its debug_index to -2 if not.
(xcoff_link_input_bfd): Update the type of debug_index after
the change above and always expect it to be nonnull. Use it to
test whether a symbol should be stripped, rather than making the
decision here. Postpone all symbol creation to the second pass.
* libcoff-in.h (xcoff_section_tdata): Update commentary.
* libcoff.h: Regenerate.
* xcofflink.c (xcoff_link_add_symbols): Set the csect of XTY_ER
symbols to bfd_und_section_ptr or bfd_abs_section_ptr, rather than
the previous symbol's csect. Treat last_symndx as an inclusive value
and simplify its handling.
(xcoff_mark): Treat last_symndx as an inclusive value. Only mark
symbols with the right csect. Don't mark rsec when processing
relocations against undefined or absolute sections.
(bfd_xcoff_size_dynamic_sections): Don't check the SEC_MARK flag
of bfd_und_section_ptr.
(xcoff_link_input_bfd): Likewise.
* coff-alpha.c (alpha_ecoff_backend_data): Initialise fields which
control long section name handling with ECOFF_NO_LONG_SECTION_NAMES.
* coff-mips.c (mips_ecoff_backend_data): Likewise.
* coff-rs6000.c (bfd_xcoff_backend_data): Initialise fields which
control long section name handling with XCOFF_NO_LONG_SECTION_NAMES.
(bfd_pmac_xcoff_backend_data): Likewise.
* coff64-rs6000.c (bfd_xcoff_backend_data): Likewise.
(bfd_xcoff_aix5_backend_data): Likewise.
(xcoff64_write_object_contents): Delete unused long_section_names
local variable.
* coff-sh.c (bfd_coff_small_swap_table): Initialise long section
name members using COFF_DEFAULT_LONG_SECTION_NAMES and make entire
struct non-const.
* coffcode.h (documentation): Update to describe long section names.
(COFFLONGSECTIONCATHELPER): New helper macro.
(BLANKOR1TOODD): Likewise.
(COFF_ENABLE_LONG_SECTION_NAMES): Likewise.
(COFF_LONG_SECTION_NAMES_SETTER): Likewise.
(COFF_DEFAULT_LONG_SECTION_NAMES): Likewise.
(bfd_coff_set_long_section_names_allowed): New function.
(bfd_coff_set_long_section_names_disallowed): Likewise.
(struct bfd_coff_backend_data): Add new backend hook function
pointer _bfd_coff_set_long_section_names.
(bfd_coff_set_long_section_names): New backend hook.
(coff_write_object_contents): Only generate long section names if
bfd_coff_long_section_names() indicates they are currently enabled.
(bfd_coff_std_swap_table): Make non-const, and initialise long
section name fields using COFF_DEFAULT_LONG_SECTION_NAMES.
(ticoff0_swap_table): Likewise to both.
(ticoff1_swap_table): Again, likewise to both.
* coffgen.c (make_a_section_from_file): Allow long section names
as inputs even if not currently allowed for outputs.
* ecoff.c (_bfd_ecoff_no_long_sections): New function.
* efi-app-ia32.c (COFF_LONG_SECTION_NAMES): Define to 0, not blank.
* efi-app-ia64.c (COFF_LONG_SECTION_NAMES): Likewise.
* efi-app-x86_64.c (COFF_LONG_SECTION_NAMES): Likewise.
* efi-bsdrv-ia32.c (COFF_LONG_SECTION_NAMES): Likewise.
* efi-bsdrv-ia64.c (COFF_LONG_SECTION_NAMES): Likewise.
* efi-bsdrv-x86_64.c (COFF_LONG_SECTION_NAMES): Likewise.
* efi-rtdrv-ia32.c (COFF_LONG_SECTION_NAMES): Likewise.
* efi-rtdrv-ia64.c (COFF_LONG_SECTION_NAMES): Likewise.
* efi-rtdrv-x86_64.c (COFF_LONG_SECTION_NAMES): Likewise.
* pei-arm.c (COFF_LONG_SECTION_NAMES): Likewise.
* pei-i386.c (COFF_LONG_SECTION_NAMES): Likewise.
* pei-mcore.c (COFF_LONG_SECTION_NAMES): Likewise.
* pei-mips.c (COFF_LONG_SECTION_NAMES): Likewise.
* pei-ppc.c (COFF_LONG_SECTION_NAMES): Likewise.
* pei-sh.c (COFF_LONG_SECTION_NAMES): Likewise.
* pei-x86_64.c (COFF_LONG_SECTION_NAMES): Likewise.
* libcoff-in.h: Update copyright year to cause updated copyright
year in generated libcoff.h, and fix typo.
* libcoff.h: Regenerated.
* libecoff.h (ECOFF_NO_LONG_SECTION_NAMES): New macro.
(_bfd_ecoff_no_long_sections): Add prototype.
* libxcoff.h (XCOFF_NO_LONG_SECTION_NAMES): New macro.
* pe-mips.c (COFF_LONG_SECTION_NAMES): Define empty if not already
defined by an including .c file.
* ticoff.h (ticoff0_swap_table): Make non-const, and initialise
long section name fields using COFF_DEFAULT_LONG_SECTION_NAMES.
(ticoff1_swap_table): Likewise to both.
ld/ChangeLog
* ld.texinfo: Update to mention long section name options.
* NEWS: Mention new behaviour and command-line options.
* pe-dll.c (pe_use_coff_long_section_names): New global variable.
(pe_output_file_set_long_section_names): New function.
(pe_dll_build_sections): Call it on output BFDs.
(pe_exe_build_sections): Likewise.
(pe_dll_fill_sections): Likewise.
(pe_exe_fill_sections): Likewise.
* pe-dll.h (pe_use_coff_long_section_names): Declare extern.
(pe_output_file_set_long_section_names): Add prototype.
* pep-dll.c (pe_use_coff_long_section_names): Define pep_ alias.
(pe_output_file_set_long_section_names): Likewise.
* pep-dll.h (pep_use_coff_long_section_names): Declare extern.
(pep_output_file_set_long_section_names): Add prototype.
* pe.em (OPTION_ENABLE_LONG_SECTION_NAMES): New getopt value macro.
(OPTION_DISABLE_LONG_SECTION_NAMES): Likewise.
(gld${EMULATION_NAME}_add_options): Add new options to xtra_long[].
(gld_${EMULATION_NAME}_list_options): Describe them.
(gld${EMULATION_NAME}_handle_option): Set or clear global
pe_use_coff_long_section_names flag when options recognised.
(gld_${EMULATION_NAME}_after_open): En/disable long section names
for main output bfd by calling pe_output_file_set_long_section_names.
* pep.em (enum options): Extend enum with new getopt option values.
(gld${EMULATION_NAME}_add_options): Add new options to xtra_long[].
(gld_${EMULATION_NAME}_list_options): Describe them.
(gld${EMULATION_NAME}_handle_option): Set or clear global
pe_use_coff_long_section_names flag when options recognised.
(gld_${EMULATION_NAME}_after_open): En/disable long section names
for main output bfd by calling pep_output_file_set_long_section_names.
ld/testsuite/ChangeLog
* ld-pe/longsecn-1.d: New test file.
* ld-pe/longsecn-2.d: Likewise.
* ld-pe/longsecn-3.d: Likewise.
* ld-pe/longsecn-4.d: Likewise.
* ld-pe/longsecn-5.d: Likewise.
* ld-pe/longsecn.d: Likewise.
* ld-pe/longsecn.exp: New test control script.
* ld-pe/longsecn.s: New test source file.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_X86_64_GOT64, BFD_RELOC_X86_64_GOTPCREL64,
BFD_RELOC_X86_64_GOTPC64, BFD_RELOC_X86_64_GOTPLT64,
BFD_RELOC_X86_64_PLTOFF64.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* elf64-x86-64.c (x86_64_elf_howto_table): Correct comment.
Add howtos for above relocs.
(x86_64_reloc_map): Add mappings for new relocs.
(elf64_x86_64_check_relocs): R_X86_64_GOT64, R_X86_64_GOTPCREL64,
R_X86_64_GOTPLT64 need a got entry. R_X86_64_GOTPLT64 also a PLT
entry. R_X86_64_GOTPC64 needs a .got section. R_X86_64_PLTOFF64
needs a PLT entry.
(elf64_x86_64_gc_sweep_hook): Reflect changes from
elf64_x86_64_check_relocs for the new relocs.
(elf64_x86_64_relocate_section): Handle new relocs.
gas/ChangeLog:
* config/tc-i386.c (type_names): Correct placement of 'static'.
(reloc): Map some more relocs to their 64 bit counterpart when
size is 8.
(output_insn): Work around breakage if DEBUG386 is defined.
(output_disp): A BFD_RELOC_64 with GOT_symbol as operand also
needs to be mapped to BFD_RELOC_X86_64_GOTPC64 or
BFD_RELOC_X86_64_GOTPC32. Also x86-64 handles pcrel addressing
different from i386.
(output_imm): Ditto.
(lex_got): Recognize @PLTOFF and @GOTPLT. Make @GOT accept also
Imm64.
(md_convert_frag): Jumps can now be larger than 2GB away, error
out in that case.
(tc_gen_reloc): New relocs are passed through. BFD_RELOC_64
and BFD_RELOC_64_PCREL are mapped to BFD_RELOC_X86_64_GOTPC64.
gas/testsuite/ChangeLog:
* gas/i386/reloc64.s: Accept 64-bit forms.
* gas/i386/reloc64.d: Adjust.
* gas/i386/reloc64.l: Adjust.
include/ChangeLog:
* elf/x86-64.h: Add the new relocations with their official
numbers.
2005-05-23 Fred Fish <fnf@specifixinc.com>
* dwarf2.c (struct dwarf2_debug): Add inliner_chain member.
(struct funcinfo): Add caller_func, caller_file, caller_line.
tag, and nesting_level members.
(lookup_address_in_function_table): Change first passed parameter
from "struct funcinfo *" to "struct comp_unit *".
(lookup_address_in_function_table): Dereference unit to find function
table.
(lookup_address_in_function_table): Traverse the function list to
create a chain of inlined functions back to the first non inlined
function.
(scan_unit_for_functions): Remember tag and nesting level. Handle
DW_AT_call_file and DW_AT_call_line.
(comp_unit_find_nearest_line): Adjust lookup_address_in_function_table
call to pass unit pointer instead of function table pointer. For
inlined functions, save pointer to the inliner chain.
(_bfd_dwarf2_find_nearest_line): Initialize inliner_chain to NULL.
(_bfd_dwarf2_find_inliner_info): New function that returns information
from the inliner chain after a call to bfd_find_nearest_line.
* bfd.c (bfd_find_inliner_info): Define using BFD_SEND.
* targets.c (BFD_JUMP_TABLE_SYMBOLS): Add entry for
NAME##_find_inliner_info.
(bfd_target): Add _bfd_find_inliner_info.
* bfd-in2.h: Regenerate.
* libbfd-in.h (_bfd_nosymbols_find_inliner_info): Define as
macro that always returns bfd_false.
(_bfd_dwarf2_find_inliner_info): Declare.
* libbfd.h: Regenerate.
* elf32-arm.c (elf32_arm_find_inliner_info): New function
that calls _bfd_dwarf2_find_inliner_info.
(bfd_elf32_find_inliner_info): Define to elf32_arm_find_inliner_info.
* elfxx-mips.c (_bfd_mips_elf_find_inliner_info): New function
that calls _bfd_dwarf2_find_inliner_info.
* elfxx-mips.h (_bfd_mips_elf_find_inliner_info): Declare.
* elfn32-mips.c (bfd_elf32_find_inliner_info): Define to
_bfd_mips_elf_find_inliner_info.
* elf64-mips.c (bfd_elf64_find_inliner_info): Ditto.
* elf32-mips.c (bfd_elf32_find_inliner_info): Ditto.
* elf.c (_bfd_elf_find_inliner_info): New function that calls
_bfd_dwarf2_find_inliner_info.
* elf-bfd.h (_bfd_elf_find_inliner_info): Declare.
* elfxx-target.h (bfd_elfNN_find_inliner_info): Define to
_bfd_elf_find_inliner_info.
* coffgen.c (coff_find_inliner_info): New function that
calls _bfd_dwarf2_find_inliner_info.
* libcoff-in.h (coff_find_inliner_info): Declare.
* libcoff.h: Regenerate.
* coff-rs6000.c (rs6000coff_vec): Add coff_find_inliner_info.
(pmac_xcoff_vec) Ditto.
* coff64-rs6000.c (rs6000coff64_vec): Ditto.
(aix5coff64_vec): Ditto.
* aout-target.h (MY_find_inliner_info): Define as
_bfd_nosymbols_find_inliner_info.
* aout-tic30.c (MY_find_inliner_info): Ditto.
* binary.c (binary_find_inliner_info): Ditto.
* i386msdos.c (msdos_find_inliner_info): Ditto.
* ihex.c (ihex_find_inliner_info): Ditto.
* libaout.h (aout_32_find_inliner_info): Ditto.
* libecoff.h (_bfd_ecoff_find_inliner_info): Ditto.
* mach-o.c (bfd_mach_o_find_inliner_info): Ditto.
* mmo.c (mmo_find_inliner_info): Ditto.
* nlm-target.h (nlm_find_inliner_info): Ditto.
* pef.c (bfd_pef_find_inliner_info): Ditto.
* ppcboot.c (ppcboot_find_inliner_info): Ditto.
* srec.c (srec_find_inliner_info): Ditto.
* tekhex.c (tekhex_find_inliner_info): Ditto.
* versados.c (versados_find_inliner_info): Ditto.
* xsym.c (bfd_sym_find_inliner_info): Ditto.
* ieee.c (ieee_find_inliner_info): New function that always
returns FALSE.
* oasys.c (oasys_find_inliner_info): Ditto.
* vms.c (vms_find_inliner_info): Ditto.
Jan Beulich