With all the previous plumbing in place, it's now easy to add a
command that actually creates a new console/mi UI.
The intended use case is to make it possible and easy for MI frontends
to provide a fully featured GDB console to users, with readline
support, command line editing, history, etc., just like if gdb was
started on the command line. Currently MI frontends have to try to
implement all of that theirselves and make use of "-interpreter-exec
console ...", which is far from perfect. If you ever tried Eclipse's
gdb console window, you'll know what I mean...
Instead of trying to multiplex console through MI, this command let's
just leverage all the built in readline/editing support already inside
gdb.
The plan is for the MI frontend to start GDB in regular console mode,
running inside a terminal emulator widget embedded in Eclipse (which
already exists, for supporting the shell widget; other frontends have
similar widgets), and then tell GDB to run a full MI interpreter on an
specified input/output device, independent of the console.
My original prototype planned to do things the other way around --
start GDB in MI mode, and then start an extra CLI console on separate
tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and
after experimentation and discussion, we ended up concluding that
starting GDB in CLI mode instead was both easier and actually also
supported an interesting use case -- connect an Eclipse frontend to a
GDB that is already running outside Eclipse.
The current usage is "new-ui <interpreter> <tty>".
E.g., on a terminal run this scriplet:
$ cat gdb-client
#!/bin/bash
reset
tty
tail -f /dev/null
$ gdb-client
/dev/pts/15
Now run gdb on another terminal, and tell it to start a MI interpreter
on the tty of the other terminal:
...
(gdb) new-ui mi /dev/pts/15
New UI allocated
Now back to the the gdb-client terminal, we'll get an MI prompt, ready
for MI input:
/dev/pts/15
=thread-group-added,id="i1"
(gdb)
You can also start a new UI running a CLI, with:
(gdb) new-ui console /dev/pts/15
Though note that this console won't support readline command editing.
It works as if "set editing off" was entered.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* interps.c (set_top_level_interpreter): New function, factored
out from captured_main.
(interpreter_completer): Make extern.
* interps.h (set_top_level_interpreter, interpreter_completer):
New declarations.
(captured_main): Use set_top_level_interpreter.
* top.c [!O_NOCTTY] (O_NOCTTY): Define as 0.
(open_terminal_stream, new_ui_command): New functions.
(init_main): Install the "new-ui" command.
All interpreter types (CLI/TUI/MI) print the prompt, and then call
start_event_loop.
Because we'll need an interpreter hook to display the
interpreter-specific prompt before going back to the event loop,
without actually starting an event loop, this patch moves the
start_event_loop call to common code, and replaces the command_loop
hook with a pre_command_look hook, that now just prints the prompt.
Turns out to be a cleanup on its own right anyway.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interpreter_pre_command_loop): New
function.
(cli_interp_procs): Install it instead of cli_command_loop.
* cli/cli-interp.h (cli_interpreter_pre_command_loop): Declare.
* event-top.c (cli_command_loop): Delete.
* interps.c (interp_new): Remove reference to command_loop_proc.
(current_interp_command_loop): Delete.
(interp_pre_command_loop): New function.
(interp_command_loop_ftype): Delete.
* interps.h (interp_pre_command_loop_ftype): New typedef.
(struct interp_procs) <command_loop_proc>: Delele field.
<pre_command_loop_proc>: New field.
(current_interp_command_loop): Delete declaration.
(interp_pre_command_loop): New declaration.
* main.c (captured_command_loop): Call interp_pre_command_loop
instead of current_interp_command_loop and start an event loop.
* mi/mi-interp.c (mi_command_loop): Delete.
(mi_interpreter_pre_command_loop): New.
(mi_interp_procs): Update.
* tui/tui-interp.c (tui_interp_procs): Install
cli_interpreter_pre_command_loop instead of cli_command_loop.
Each MI instance should obviously have its own raw output channel,
along with save_raw_stdout.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* interps.c (current_interpreter): New function.
* interps.h (current_interpreter): New declaration.
* mi/mi-cmds.h (raw_stdout): Delete declaration.
* mi/mi-common.h (struct mi_interp) <raw_stdout,
saved_raw_stdout>: New field.
* mi/mi-interp.c (display_mi_prompt): New parameter 'mi'. Adjust
to per-UI raw_stdout.
(mi_interpreter_init): Adjust to per-UI raw_stdout.
(mi_on_sync_execution_done, mi_execute_command_input_handler)
(mi_command_loop): Pass MI instance to display_mi_prompt.
(mi_on_normal_stop_1, mi_output_running_pid, mi_on_resume_1)
(mi_on_resume): Adjust to per-UI raw_stdout.
(saved_raw_stdout): Delete.
(mi_set_logging): Adjust to per-UI raw_stdout and
saved_raw_stdout.
* mi/mi-main.c (raw_stdout): Delete.
(mi_cmd_gdb_exit, captured_mi_execute_command)
(mi_print_exception, mi_load_progress): Adjust to per-UI
raw_stdout.
(print_diff_now, mi_print_timing_maybe): New ui_file parameter.
Pass it along.
(print_diff): New ui_file parameter. Send output there instead of
raw_stdout.
* mi/mi-main.h (struct ui_file): Forward declare.
(mi_print_timing_maybe): Add ui_file parameter.
Due to the way that readline's API works (based on globals), we can
only have one instance of readline in a process. So the goal of this
patch is to only allow editing in the main UI, and make sure that only
one UI calls into readline. Some MI paths touch readline variables
currently, which is bad as that is changing variables that matter for
the main console UI. This patch fixes those.
This actually fixes a nasty bug -- starting gdb in MI mode ("gdb
-i=mi"), and then doing "set editing on" crashes GDB, because MI is
not prepared to use readline:
set editing on
&"set editing on\n"
=cmd-param-changed,param="editing",value="on"
^done
(gdb)
p 1
readline: readline_callback_read_char() called with no handler!
Aborted (core dumped)
The fix for that was to add an interp_proc method to query the
interpreter whether it actually supports editing. New test included.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
PR mi/20034
* cli/cli-interp.c: Include cli-interp.h and event-top.h.
(cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the
UI's input_handler here.
(cli_interpreter_supports_command_editing): New function.
(cli_interp_procs): Install it.
* cli/cli-interp.h: New file.
* event-top.c (async_command_editing_p): Rename to ...
(set_editing_cmd_var): ... this.
(change_line_handler): Add parameter 'editing', and use it. Bail
early if the interpreter doesn't support editing. Don't touch
readline state if editing is off.
(gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install)
(gdb_rl_callback_handler_reinstall): Assert the current UI is the
main UI.
(display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if
not using readline. Check whether the current UI is using command
editing instead of checking the async_command_editing_p global.
(set_async_editing_command): Delete.
(gdb_setup_readline): Add 'editing' parameter. Only allow editing
on the main UI. Don't touch readline state if editing is off.
(gdb_disable_readline): Don't touch readline state if editing is
off.
* event-top.h (gdb_setup_readline): Add 'int' parameter.
(set_async_editing_command): Delete declaration.
(change_line_handler, command_line_handler): Declare.
(async_command_editing_p): Rename to ...
(set_editing_cmd_var): ... this.
* infrun.c (reinstall_readline_callback_handler_cleanup): Check
whether the current UI has editing enabled rather than checking
the async_command_editing_p global.
* interps.c (interp_supports_command_editing): New function.
* interps.h (interp_supports_command_editing_ftype): New typedef.
(struct interp_procs) <supports_command_editing_proc>: New field.
(interp_supports_command_editing): Declare.
* mi/mi-interp.c (mi_interpreter_resume): Pass 0 to
gdb_setup_readline. Don't clear the async_command_editing_p
global. Update comments.
* top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check
whether the current UI has editing enabled rather than checking
the async_command_editing_p global. Don't touch readline state if
editing is off.
(undo_terminal_modifications_before_exit): Switch to the main UI.
Unconditionally call gdb_disable_readline.
(set_editing): New function.
(show_async_command_editing_p): Rename to ...
(show_editing): ... this. Show the state of the current UI.
(_initialize_top): Adjust.
* top.h (struct ui) <command_editing>: New field.
* tui/tui-interp.c: Include cli/cli-interp.h.
(tui_resume): Pass 1 to gdb_setup_readline. Set the UI's
input_handler.
(tui_interp_procs): Install
cli_interpreter_supports_command_editing.
* tui/tui-io.c (tui_getc): Check whether the current UI has
editing enabled rather than checking the async_command_editing_p
global.
gdb/testsuite/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
PR mi/20034
* gdb.mi/mi-editing.exp: New file.
If every UI instance has its own set of interpreters, then the current
scheme of creating the interpreters at GDB initialization time no
longer works. We need to create them whenever a new UI instance is
created.
The scheme implemented here has each interpreter register a factory
callback that when called creates a new instance of a specific
interpreter type. Then, when some code in gdb looks up an interpreter
(always by name), if there's none yet, the factory method is called to
construct one.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_uiout): Delete, moved into ...
(struct cli_interp): ... this new structure.
(cli_on_normal_stop, cli_on_signal_received)
(cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
(cli_on_no_history): Use interp_ui_out.
(cli_interpreter_init): If top level, set the cli_interp global.
(cli_interpreter_init): Return the interp's data instead of NULL.
(cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust
to cli_uiout being in the interpreter's data.
(cli_interp_procs): New, factored out from _initialize_cli_interp.
(cli_interp_factory): New function.
(_initialize_cli_interp): Call interp_factory_register.
* interps.c (get_interp_info): New, factored out from ...
(get_current_interp_info): ... this.
(interp_new): Add parameter 'data'. Store it.
(struct interp_factory): New function.
(interp_factory_p): New typedef. Define a VEC_P.
(interpreter_factories): New global.
(interp_factory_register): New function.
(interp_add): Add 'ui' parameter. Use get_interp_info and
interp_lookup_existing.
(interp_lookup): Rename to ...
(interp_lookup_existing): ... this. Add 'ui' parameter. Don't
check for NULL or empty name here.
(interp_lookup): Add 'ui' parameter and reimplement.
(interp_set_temp, interpreter_exec_cmd): Adjust.
(interpreter_completer): Complete on registered interpreter
factories instead of interpreters.
* interps.h (interp_factory_func): New typedef.
(interp_factory_register): Declare.
(interp_new, interp_add): Adjust.
(interp_lookup): Declare.
* main.c (captured_main): Adjust.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust.
(mi_interp_procs): New, factored out from
_initialize_mi_interp.
(mi_interp_factory): New function.
* python/python.c (execute_gdb_command): Adjust.
* tui/tui-interp.c (tui_init): If top level, set the tui_interp
global.
(tui_interp_procs): New.
(tui_interp_factory): New function.
(_initialize_tui_interp): Call interp_factory_register.
Make each UI have its own interpreter list, top level interpreter,
current interpreter, etc. The "interpreter_async" global is not
really specific to an struct interp (it crosses interpreter-exec ...),
so I moved it to "struct ui" directly, while the other globals were
left hidden in interps.c, opaque to the rest of GDB.
gdb/ChangeLog:
2016-06-21 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_do_actions_1): Access the current UI's
async field instead of the interpreter_async global.
* cli/cli-script.c (execute_user_command, while_command)
(if_command, script_from_file): Likewise.
* compile/compile.c: Include top.h instead of interps.h.
(compile_file_command, compile_code_command)
(compile_print_command): Access the current UI's async field
instead of the interpreter_async global.
* guile/guile.c: Include top.h instead of interps.h.
(guile_repl_command, guile_command, gdbscm_execute_gdb_command):
Access the current UI's async field instead of the
interpreter_async global.
* guile/scm-ports.c: Include top.h instead of interps.h.
(ioscm_with_output_to_port_worker): Access the current UI's async
field instead of the interpreter_async global.
* inf-loop.c (inferior_event_handler): Likewise.
* infcall.c (run_inferior_call): Likewise.
* infrun.c (reinstall_readline_callback_handler_cleanup)
(fetch_inferior_event): Likewise.
* interps.c (interpreter_async): Delete.
(struct ui_interp_info): New.
(get_current_interp_info): New function.
(interp_list, current_interpreter, top_level_interpreter_ptr):
Delete.
(interp_add, interp_set, interp_lookup, interp_ui_out)
(current_interp_set_logging, interp_set_temp)
(current_interp_named_p): Adjust to per-UI interpreters.
(command_interpreter): Delete.
(command_interp, current_interp_command_loop, interp_quiet_p)
(interp_exec, interpreter_exec_cmd, interpreter_completer)
(top_level_interpreter, top_level_interpreter_data): Adjust to
per-UI interpreters.
* interps.h (interpreter_async): Delete.
* main.c (captured_command_loop): Access the current UI's async
field instead of the interpreter_async global.
* python/python.c (python_interactive_command, python_command)
(execute_gdb_command): Likewise.
* top.c (maybe_wait_sync_command_done, execute_command_to_string):
Access the current UI's async field instead of the
interpreter_async global.
* top.h (struct tl_interp_info): Forward declare.
(struct ui) <interp_info, async>: New fields.
This is a straightforward replacement of the TUI's use of the
aforementioned hook with the register_changed observer. Since this was
the only user of the hook, this patch also removes the hook.
gdb/ChangeLog:
* defs.h (deprecated_register_changed_hook): Remove prototype.
* interps.c (clear_iterpreter_hooks): Remove reference to
deprecated_register_changed_hook.
* top.c (deprecated_register_changed_hook): Remove prototype.
* valops.c (value_assign): Remove reference to
deprecated_register_changed_hook.
* tui/tui-hooks.c (tui_register_changed): Add parameter "frame".
Add comment documenting the function.
(tui_register_changed_observer): Define.
(tui_install_hooks): Remove reference to
deprecated_register_changed_hook. Set
tui_register_changed_observer.
(tui_remove_hooks): Remove reference to
deprecated_register_changed_hook. Unset
tui_register_changed_observer.
This hook is no longer used, and can therefore be eliminated.
gdb/ChangeLog:
* defs.h (deprecated_init_ui_hook): Delete. Remove associated
comment.
* top.c (deprecated_init_ui_hook): Delete.
(gdb_init): Remove handling of deprecated_init_ui_hook.
* interps.c (clear_interpreter_hooks): Remove handling of
deprecated_init_ui_hook.
* main.c (captured_main): Update comment.
This commit removes the pointless function initialize_interps.
gdb/
2014-08-05 Gary Benson <gbenson@redhat.com>
* interps.c (initialize_interps): Remove prototype.
(interpreter_initialized): Remove static global.
(interp_add): Do not call initialize_interps.
(initialize_interps): Remove function.
Enabling target-async by default will require implementing sync
execution on top of an async target, much like foreground command are
implemented on the CLI in async mode.
In order to do that, we will need better control of when to print the
MI prompt. Currently the interp->display_prompt_p hook is all we
have, and MI just always returns false, meaning, make
display_gdb_prompt a no-op. We'll need to be able to know to print
the MI prompt in some of the conditions that display_gdb_prompt is
called from the core, but not all.
This is all a litte twisted currently. As we can see,
display_gdb_prompt is really CLI specific, so make the console
interpreters (console/tui) themselves call it. To be able to do that,
and add a few different observers that the interpreters can use to
distinguish when or why the the prompt is being printed:
#1 - one called whenever a command is cancelled due to an error.
#2 - another for when a foreground command just finished.
In both cases, CLI wants to print the prompt, while MI doesn't.
MI will want to print the prompt in the second case when in a special
MI mode.
The display_gdb_prompt call in interp_set made me pause. The comment
there reads:
/* Finally, put up the new prompt to show that we are indeed here.
Also, display_gdb_prompt for the console does some readline magic
which is needed for the console interpreter, at least... */
But, that looks very much like a no-op to me currently:
- the MI interpreter always return false in the prompt hook, meaning
actually display no prompt.
- the interpreter used at that point is still quiet. And the
console/tui interpreters return false in the prompt hook if they're
quiet, meaning actually display no prompt.
The only remaining possible use would then be the readline magic. But
whatever that might have been, it's not reacheable today either,
because display_gdb_prompt returns early, before touching readline if
the interpreter returns false in the display_prompt_p hook.
Tested on x86_64 Fedora 20, sync and async modes.
gdb/
2014-05-29 Pedro Alves <palves@redhat.com>
* cli/cli-interp.c (cli_interpreter_display_prompt_p): Delete.
(_initialize_cli_interp): Adjust.
* event-loop.c: Include "observer.h".
(start_event_loop): Notify 'command_error' observers instead of
calling display_gdb_prompt. Remove FIXME comment.
* event-top.c (display_gdb_prompt): Remove call into the
interpreters.
* inf-loop.c: Include "observer.h".
(inferior_event_handler): Notify 'command_error' observers instead
of calling display_gdb_prompt.
* infrun.c (fetch_inferior_event): Notify 'sync_execution_done'
observers instead of calling display_gdb_prompt.
* interps.c (interp_set): Don't call display_gdb_prompt.
(current_interp_display_prompt_p): Delete.
* interps.h (interp_prompt_p): Delete declaration.
(interp_prompt_p_ftype): Delete.
(struct interp_procs) <prompt_proc_p>: Delete field.
(current_interp_display_prompt_p): Delete declaration.
* mi-interp.c (mi_interpreter_prompt_p): Delete.
(_initialize_mi_interp): Adjust.
* tui-interp.c (tui_init): Install 'sync_execution_done' and
'command_error' observers.
(tui_on_sync_execution_done, tui_on_command_error): New
functions.
(tui_display_prompt_p): Delete.
(_initialize_tui_interp): Adjust.
gdb/doc/
2014-05-29 Pedro Alves <palves@redhat.com>
* observer.texi (sync_execution_done, command_error): New
subjects.
The other part of PR gdb/13860 is about console execution commands in
MI getting their output half lost. E.g., take the finish command,
executed on a frontend's GDB console:
sync:
finish
&"finish\n"
~"Run till exit from #0 usleep (useconds=10) at ../sysdeps/unix/sysv/linux/usleep.c:27\n"
^running
*running,thread-id="1"
(gdb)
~"0x00000000004004d7 in foo () at stepinf.c:6\n"
~"6\t usleep (10);\n"
~"Value returned is $1 = 0\n"
*stopped,reason="function-finished",frame={addr="0x00000000004004d7",func="foo",args=[],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="6"},thread-id="1",stopped-threads="all",core="1"
async:
finish
&"finish\n"
~"Run till exit from #0 usleep (useconds=10) at ../sysdeps/unix/sysv/linux/usleep.c:27\n"
^running
*running,thread-id="1"
(gdb)
*stopped,reason="function-finished",frame={addr="0x00000000004004d7",func="foo",args=[],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="6"},gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0"
Note how all the "Value returned" etc. output is missing in async mode.
The same happens with e.g., catchpoints:
=breakpoint-modified,bkpt={number="1",type="catchpoint",disp="keep",enabled="y",what="22016",times="1"}
~"\nCatchpoint "
~"1 (forked process 22016), 0x0000003791cbd8a6 in __libc_fork () at ../nptl/sysdeps/unix/sysv/linux/fork.c:131\n"
~"131\t pid = ARCH_FORK ();\n"
*stopped,reason="fork",disp="keep",bkptno="1",newpid="22016",frame={addr="0x0000003791cbd8a6",func="__libc_fork",args=[],file="../nptl/sysdeps/unix/sysv/linux/fork.c",fullname="/usr/src/debug/glibc-2.14-394-g8f3b1ff/nptl/sysdeps/unix/sysv/linux/fork.c",line="131"},thread-id="1",stopped-threads="all",core="0"
where all those ~ lines are missing in async mode, or just the "step"
current line indication:
s
&"s\n"
^running
*running,thread-id="all"
(gdb)
~"13\t foo ();\n"
*stopped,frame={addr="0x00000000004004ef",func="main",args=[{name="argc",value="1"},{name="argv",value="0x7fffffffdd78"}],file="stepinf.c",fullname="/home/pedro/gdb/tests/stepinf.c",line="13"},thread-id="1",stopped-threads="all",core="3"
(gdb)
Or in the case of the PRs example, the "Stopped due to shared library
event" note:
start
&"start\n"
~"Temporary breakpoint 1 at 0x400608: file ../../../src/gdb/testsuite/gdb.mi/solib-main.c, line 21.\n"
=breakpoint-created,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x0000000000400608",func="main",file="../../../src/gdb/testsuite/gdb.mi/solib-main.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/solib-main.c",line="21",times="0",original-location="main"}
~"Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/solib-main \n"
=thread-group-started,id="i1",pid="21990"
=thread-created,id="1",group-id="i1"
^running
*running,thread-id="all"
(gdb)
=library-loaded,id="/lib64/ld-linux-x86-64.so.2",target-name="/lib64/ld-linux-x86-64.so.2",host-name="/lib64/ld-linux-x86-64.so.2",symbols-loaded="0",thread-group="i1"
~"Stopped due to shared library event (no libraries added or removed)\n"
*stopped,reason="solib-event",thread-id="1",stopped-threads="all",core="3"
(gdb)
IMO, if you're typing execution commands in a frontend's console, you
expect to see their output. Indeed it's what you get in sync mode. I
think async mode should do the same. Deciding what to mirror to the
console wrt to breakpoints and random stops gets messy real fast.
E.g., say "s" trips on a breakpoint. We'd clearly want to mirror the
event to the console in this case. But what about more complicated
cases like "s&; thread n; s&", and one of those steps spawning a new
thread, and that thread hitting a breakpoint? It's impossible in
general to track whether the thread had any relation to the commands
that had been executed. So I think we should just simplify and always
mirror breakpoints and random events to the console.
Notes:
- mi->out is the same as gdb_stdout when MI is the current
interpreter. I think that referring to that directly is cleaner.
An earlier revision of this patch made the changes that are now
done in mi_on_normal_stop directly in infrun.c:normal_stop, and so
not having an obvious place to put the new uiout by then, and not
wanting to abuse CLI's uiout, I made a temporary uiout when
necessary.
- Hopefuly the rest of the patch is more or less obvious given the
comments added.
Tested on x86_64 Fedora 20, no regressions.
2014-05-21 Pedro Alves <palves@redhat.com>
PR gdb/13860
* gdbthread.h (struct thread_control_state): New field
`command_interp'.
* infrun.c (follow_fork): Copy the new thread control field to the
child fork thread.
(clear_proceed_status_thread): Clear the new thread control field.
(proceed): Set the new thread control field.
* interps.h (command_interp): Declare.
* interps.c (command_interpreter): New global.
(command_interp): New function.
(interp_exec): Set `command_interpreter' while here.
* cli-out.c (cli_uiout_dtor): New function.
(cli_ui_out_impl): Install it.
* mi/mi-interp.c: Include cli-out.h.
(mi_cmd_interpreter_exec): Add comment.
(restore_current_uiout_cleanup): New function.
(ui_out_free_cleanup): New function.
(mi_on_normal_stop): If finishing an execution command started by
a CLI command, or any kind of breakpoint-like event triggered,
print the stop event to the output (CLI) stream.
* mi/mi-out.c (mi_ui_out_impl): Install NULL `dtor' handler.
2014-05-21 Pedro Alves <palves@redhat.com>
PR gdb/13860
* gdb.mi/mi-cli.exp (line_callee4_next_step): New global.
(top level): Test that output related to execution commands is
sent to the console with CLI commands, but not with MI commands.
Test that breakpoint events are always mirrored to the console.
Also expect the new source line to be output after a "next" in
async mode too. Make it a pass/fail test.
* gdb.mi/mi-solib.exp: Test that the CLI solib event note is
output.
* lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
https://sourceware.org/ml/gdb-patches/2013-09/msg00179.html
gdb/ChangeLog
* cli/cli-interp.c (_initialize_cli_interp): Add a
command_loop_proc to interp_procs.
* event-top.c (cli_command_loop): Change signature to match
interp_command_loop_ftype.
* event-top.h (cli_command_loop): Same.
* interps.c (interp_new): Require every interpreter to have a
command_loop_proc.
(current_interp_command_loop): Just call the command_loop_proc on
the current interpreter.
* tui/tui-interp.c (_initialize_tui_interp): Add a
command_loop_proc to interp_procs.
Fix some bugs pointed out by the cleanup checker. This one just fixes
some simple CLI reports, where CLI commands know that their caller
will do cleanups. This an older style with few instances, so it is
simpler to fix them up than to teach the checker about it.
* cli/cli-cmds.c (cd_command, alias_command): Call do_cleanups.
* cli/cli-dump.c (restore_binary_file): Call do_cleanups.
* interps.c (interpreter_exec_cmd): Call do_cleanups.
* source.c (show_substitute_path_command): Call do_cleanups.
(unset_substitute_path_command, set_substitute_path_command):
Likewise.
* symfile.c (load_command): Call do_cleanups.
This is sort of a continuation of Keith's parse_exp_1 constification
patch. It started out by undoing these bits:
@@ -754,9 +754,12 @@ validate_actionline (char **line, struct
tmp_p = p;
for (loc = t->base.loc; loc; loc = loc->next)
{
- p = tmp_p;
- exp = parse_exp_1 (&p, loc->address,
+ const char *q;
+
+ q = tmp_p;
+ exp = parse_exp_1 (&q, loc->address,
block_for_pc (loc->address), 1);
+ p = (char *) q;
and progressively making more things const upwards, fixing fallout,
rinse repeat, until GDB built again (--enable-targets=all).
That ended up constifying lookup_cmd/add_cmd and (lots of) friends,
and the completers.
I didn't try to constify the command hooks themselves, because I know
upfront there are commands that write to the command string argument,
and I think I managed to stop at a nice non-hacky split point already.
I think the only non-really-super-obvious changes are
tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions.
The rest is just mostly about 'char *' => 'const char *', 'char **'=>
'const char **', and the occasional (e.g., deprecated_cmd_warning)
case of 'char **'=> 'const char *', where/when I noticed that nothing
actually cares about the pointer to pointer output.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-03-13 Pedro Alves <palves@redhat.com>
* ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
fields const.
(ada_make_symbol_completion_list): Make "text0" parameter const.
* ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
* breakpoint.c (condition_completer): Make "text" and "word"
parameters const. Adjust.
(check_tracepoint_command): Adjust to validate_actionline
prototype change.
(catch_syscall_completer): Make "text" and "word" parameters
const.
* cli/cli-cmds.c (show_user): Make "comname" local const.
(valid_command_p): Make "command" parameter const.
(alias_command): Make "alias_prefix" and "command_prefix" locals
const.
* cli/cli-decode.c (add_cmd): Make "name" parameter const.
(add_alias_cmd): Make "name" and "oldname" parameters const.
Adjust. No longer make copy of OLDNAME.
(add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
(delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
Make "name" parameter const.
(help_cmd): Rename "command" parameter to "arg". New const local
"command".
(find_cmd): Make "command" parameter const.
(lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
deprecated_cmd_warning prototype change.
(undef_cmd_error): Make "cmdtype" parameter const.
(lookup_cmd): Make "line" parameter const.
(deprecated_cmd_warning): Change type of "text" parameter to
pointer to const char, from pointer to pointer to char. Adjust.
(lookup_cmd_composition): Make "text" parameter const.
(complete_on_cmdlist, complete_on_enum): Make "text" and "word"
parameters const.
* cli/cli-decode.h (struct cmd_list_element) <name>: Make field
const.
* cli/cli-script.c (validate_comname): Make "tem" local const.
(define_command): New const local "tem_c". Use it in calls to
lookup_cmd.
(document_command): Make "tem" and "comfull" locals const.
(show_user_1): Make "prefix" and "name" parameters const.
* cli-script.h (show_user_1): Make "prefix" and "name" parameters
const.
* command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
(deprecated_cmd_warning, lookup_cmd_composition, add_com)
(add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
(complete_on_enum, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Change prototypes, constifying strings.
* completer.c (noop_completer, filename_completer): Make "text"
and "prefix" parameters const.
(location_completer, expression_completer)
(complete_line_internal): Make "text" and "prefix" parameters
const and adjust.
(command_completer, signal_completer): Make "text" and "prefix"
parameters const.
* completer.h (noop_completer, filename_completer)
(expression_completer, location_completer, command_completer)
(signal_completer): Change prototypes.
* corefile.c (complete_set_gnutarget): Make "text" and "word"
parameters const.
* cp-abi.c (cp_abi_completer): Likewise.
* expression.h (parse_expression_for_completion): Change
prototype.
* f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
parameters const.
* infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
* infrun.c (handle_completer): Make "text" and "word" parameters
const.
* interps.c (interpreter_completer): Make "text" and "word"
parameters const.
* language.h (struct language_defn)
<la_make_symbol_completion_list>: Make "text" and "word"
parameters const.
* parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
(parse_exp_in_context): Rename to ...
(parse_exp_in_context_1): ... this.
(parse_exp_in_context): Reimplement, with const hack from
parse_exp_1.
(parse_expression_for_completion): Make "string" parameter const.
* printcmd.c (decode_format): Make "string_ptr" parameter pointer
to pointer to const char. Adjust.
(print_command_1): Make "exp" parameter const.
(output_command): Rename to ...
(output_command_const): ... this. Make "exp" parameter const.
(output_command): Reimplement.
(x_command): Adjust.
(display_command): Rename "exp" parameter to "arg". New "exp"
local, const version of "arg".
* python/py-auto-load.c (gdbpy_initialize_auto_load): Make
"cmd_name" local const.
* python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
call.
(cmdpy_completer): Make "text" and "word" parameters const.
(gdbpy_parse_command_name): Make "prefix_text2" local const.
* python/py-param.c (add_setshow_generic): Make "tmp_name" local
const.
* remote.c (_initialize_remote): Make "cmd_name" local const.
* symtab.c (language_search_unquoted_string): Make "text" and "p"
parameters const. Adjust.
(completion_list_add_fields): Make "sym_text", "text" and "word"
parameters const.
(struct add_name_data) <sym_text, text, word>: Make fields const.
(default_make_symbol_completion_list_break_on): Make "text" and
"word" parameters const. Adjust locals.
(default_make_symbol_completion_list)
(make_symbol_completion_list, make_symbol_completion_type)
(make_symbol_completion_list_fn): Make "text" and "word"
parameters const.
(make_file_symbol_completion_list): Make "text", "word" and
"srcfile" parameters const. Adjust locals.
(add_filename_to_list): Make "text" and "word" parameters const.
(struct add_partial_filename_data) <text, word>: Make fields
const.
(make_source_files_completion_list): Make "text" and "word"
parameters const.
* symtab.h (default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type enum type_code)
(make_symbol_completion_list_fn make_file_symbol_completion_list)
(make_source_files_completion_list): Change prototype.
* top.c (execute_command): Adjust to pass pointer to pointer to
const char to lookup_cmd, and to deprecated_cmd_warning prototype
change.
(set_verbose): Make "cmdname" local const.
* tracepoint.c (decode_agent_options): Make "exp" parameter const,
and adjust.
(validate_actionline): Make "line" parameter a pointer to const
char, and adjust.
(encode_actions_1): Make "action_exp" local const, and adjust.
(encode_actions): Adjust.
(replace_comma): Delete.
(trace_dump_actions): Make "action_exp" and "next_comma" locals
const, and adjust. Don't frob the action string while splitting
it at commas. Instead, make a copy of each split substring in
turn.
(trace_dump_command): Adjust to validate_actionline prototype
change.
* tracepoint.h (decode_agent_options, decode_agent_options)
(encode_actions, validate_actionline): Change prototypes.
* valprint.h (output_command): Delete declaration.
(output_command_const): Declare.
* value.c (function_destroyer): Cast const away in xfree call.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* NEWS: Mention it.
* interps.h (interp_set_logging_ftype): New typedef.
(struct interp_procs): New field set_logging_proc.
(current_interp_set_logging): Declare.
* interps.c (current_interp_set_logging): New function.
* cli/cli-logging.c: Include interps.h.
(set_logging_redirect): Call current_interp_set_logging.
(pop_output_files): Ditto.
(handle_redirections): Ditto, plus skip ui-out redirect if MI.
* mi/mi-console.h (mi_console_set_raw): Declare.
* mi/mi-console.c (mi_console_set_raw): New function.
* mi/mi-interp.c (saved_raw_stdout): New global.
(mi_set_logging): New function.
(_initialize_mi_interp): Add it to interp procs.
* gdb.mi/mi-logging.exp: New file.
commands, even when the current interpreter is MI.
interps.c (interp_set_temp): New function.
interps.h (interp_set_temp): Add prototype.
cli/cli-script.c (restore_interp): New cleanup function.
(read_command_lines): Temporarily override the current interpreter
with CLI and arrange for restoring the original one.
2011-09-12 Pedro Alves <pedro@codesourcery.com>
Matt Rice <ratmice@gmail.com>
PR gdb/13175
* interps.c (struct interp) <interpreter_out>: Delete field.
(interp_new): Remove the data and uiout parameters and adjust.
(interp_set): Only set the current_uiout from the interpreter's
uiout after initializing the interpreter. Adjust call to
init_proc.
(interp_ui_out): Adjust to call procs->ui_out_proc.
(interp_data, interp_name): New.
* interps.h (interp_init_ftype): Add `self' parameter.
(interp_ui_out_ftype): New typedef.
(struct interp_procs) <ui_out_proc>: New method pointer.
(interp_new): Remove the data and uiout parameters.
(interp_data, interp_name): Declare.
* tui/tui-interp.c (tui_init): Adjust prototype.
(tui_ui_out): New.
(_initialize_tui_interp): Install tui_ui_out. Don't instanciate
tui_out here. Adjust call to interp_new.
* tui/tui-io.c (tui_initialize_io): Don't set current_uiout here.
* cli/cli-interp.c (cli_interpreter_init): Adjust prototype.
(cli_ui_out): New.
(_initialize_cli_interp): Install it. Adjust call to interp_new.
* mi/mi-common.h (struct mi_interp) <uiout>: New field.
* mi/mi-interp.c (mi_interpreter_init): Adjust prototype.
Initialize mi->uiout depending on the mi_version as extracted from
the interpreter's name.
(mi_ui_out): New.
(_initialize_mi_interp): Install mi_ui_out. Adjust calls to
interp_new. Don't allocate the ui_out's of the interpreters here.
gdb/testsuite/
2011-09-12 Matt Rice <ratmice@gmail.com>
Pedro Alves <pedro@codesourcery.com>
PR gdb/13175
* gdb.base/interp.exp: New tests.
* gdb.base/interp.c: New file.
* top.c: Include interps.h.
(execute_command): If the target can async, but the interpreter is
in sync mode, synchronously wait for the command to finish before
returning.
(execute_command_to_string): Force the interpreter to sync mode.
* infrun.c: Include interps.h.
(fetch_inferior_event): Don't restore the prompt yet if the
interpreter is in sync mode.
* interps.c (interpreter_async): New global.
* interps.h (interpreter_async): Declare.
* inf-loop.c: Include interps.h.
(inferior_event_handler): Don't print the language change or run
breakpoint commands yet if the interpreter in is sync mode.
* main.c (captured_command_loop): Flip the interpreter to async
mode.
* cli/cli-script.c: Include interps.h.
(execute_user_command, while_command, if_command): Force the
interpreter to sync mode.
* python/python.c: Include interps.h.
(python_command, execute_gdb_command): Force the interpreter to
sync mode.
gdb/
* continuations.h (continuation_ftype): Add `err' parameter.
Document parameters.
(do_all_continuations, do_all_continuations_thread)
(do_all_intermediate_continuations)
(do_all_intermediate_continuations_thread)
(do_all_inferior_continuations): Add `err' parameter.
* continuations.c (do_my_continuations_1, do_my_continuations)
(do_all_inferior_continuations, do_all_continuations_ptid)
(do_all_continuations_thread_callback)
(do_all_continuations_thread, do_all_continuations)
(do_all_intermediate_continuations_thread_callback)
(do_all_intermediate_continuations_thread)
(do_all_intermediate_continuations): Add `err' parameter, and pass
it down all the way to the continuations proper.
* inf-loop.c (inferior_event_handler): If fetching an inferior
event throws an error, don't pop the target, and still call the
continuations, but with `err' set. Adjust all other continuation
calls.
* breakpoint.c (until_break_command_continuation): Add `err'
parameter.
* infcmd.c (step_1_continuation): Add `err' parameter. Don't
issue another step if `err' is set.
(struct until_next_continuation_args): New.
(until_next_continuation): Add `err' parameter. Adjust.
(until_next_command): Adjust.
(struct finish_command_continuation_args): Add `thread' field.
(finish_command_continuation): Add `err' parameter. Handle it.
(finish_forward): Adjust.
(attach_command_continuation): Add `err' parameter. Handle it.
* infrun.c (infrun_thread_stop_requested_callback): Adjust to
cancel the continuations.
* interps.c (interp_set): Adjust to cancel the continuations.
* thread.c (clear_thread_inferior_resources): Adjust to cancel the
continuations rather than discarding.
(free_thread): Don't clear thread inferior resources here.
(delete_thread_1): Do it here instead. And do it before removing
the thread from the threads list. Tag the thread as exited before
clearing thread inferior resources.
* infcall.c: White space.
* inf-child.c: White space.
* infcmd.c: White space.
* inferior.c: White space.
* inf-loop.c: White space.
* inflow.c: White space.
* inline-frame.c: White space.
* interps.c: White space.
Rewrite continuations internals on top of cleanups and plug
continuation arguments leaks.
* defs.h (struct continuation): Make it opaque.
(add_continuation, add_intermediate_continuation): Drop the int
argument of the continuation hook argument. Add
continuation_free_args argument.
(do_all_continuations, do_all_intermediate_continuations): Drop
the error_p argument.
* utils.c (add_continuation): Drop the int argument of the
continuation hook argument. Add continuation_free_args argument.
Reimplement on top of cleanups.
(do_all_continuations): Drop error argument. Reimplement on top
of cleanups.
(discard_all_continuations): Reimplement on top of cleanups.
(add_intermediate_continuation): Drop the int argument of the
continuation hook argument. Add continuation_free_args argument.
Reimplement on top of cleanups.
(do_all_intermediate_continuations): Drop error argument.
Reimplement on top of cleanups.
(discard_all_intermediate_continuations): Reimplement on top of
cleanups.
* breakpoint.c (until_break_command_continuation): Drop error
argument. Add xfree as continuation argument deleter.
* inf-loop.c (inferior_event_handler): On error, discard all
continuations. Adjust to new do_all_intermediate_continuations
and do_all_continuations interfaces.
* infcmd.c (step_1_continuation): Drop error_p argument. Adjust.
Pass xfree as continuation argument deleter.
(finish_command_continuation): Drop error_p argument. Adjust.
(finish_command_continuation_free_arg): New.
(finish_command): Pass finish_command_continuation_free_arg as
continuation argument deleter. Adjust to new do_all_continuations
interfaces.
(attach_command_continuation): Drop error_p argument.
(attach_command_continuation_free_args): New.
(attach_command): Pass attach_command_continuation_free_args as
continuation argument deleter.
* interps.c (interp_set): Adjust to new do_all_continuations
interfaces.
* event-top.c (stdin_event_handler): In error, also discard the
intermediate continuations.
* breakpoint.c (until_break_command_continuation): Add
the 'error' parameter. Directly delete the breakoint as
opposed to running cleanups.
(until_break_command): Install continuation only
after starting the target. Don't use exec cleanups,
use ordinary cleanups. Discard cleanups is successfully
started the target in async mode.
(make_cleanup_delete_breakpoint): Remove.
* breakpoint.h (make_cleanup_delete_breakpoint): Remove
declaration.
* defs.h (do_exec_cleanups, make_exec_cleanup): Remove
declarations.
(struct continations): Add the 'error' parameter to the
continuation_hook field.
(add_continuation, do_all_continuations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): Add the 'error' parameter.
* exceptions.c (throw_exception): Don't call do_exec_cleanups.
* inf-loop.c (inferior_event_handler): Instead of calling
discard_all_continuations, use do_all_continuations with 1 as
'error' parameter. Pass 0 as 'error' parameter in existing uses
of discard_all_continuations.
* infcmd.c (step_1): Do not use exec cleanup. For async case, discard
cleanups.
(step_once): Install continuation only after resuming the target.
(step_1_continuation): Disable longjmp breakpoint on error.
(finish_command_continuation): Add the error parameter. Delete
the finish breakpoint directly, do not use cleanups.
(finish_command): Do not use exec_cleanups. Always setup
continuation. For sync case, immediately run them.
(attach_command_continuation): Add the error parameter.
* infrun.c (fetch_inferior_event): Do not use exec cleanups to
remove step_resume_breakpoint -- adjust delete it directly.
* interps.c (interp_set): Adjust call to do_all_continations.
* mi/mi-interp.c (mi_interpreter_exec_continuation): Do not
do exec cleanups.
* mi/mi-main.c (mi_cmd_target_select): Do not do exec
cleanups.
(mi_cmd_execute): Do not use exec_cleanup.
(mi_execute_async_cli_command): Simplify the string concatenation
logic. Do no use exec cleanup.
(mi_exec_async_cli_cmd_continuation): New parameter error.
Free last_async_command.
* top.c (command_line_handler_continuation): New parameter error.
* utils.c (exec_cleanup_chain, make_exec_cleanup)
(do_exec_cleanups): Remove.
(add_continuation, do_all_continations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): New parameter error.
Pedro Alves