* arm-linux-tdep.c (arm_linux_sigreturn_return_addr): New.
(arm_linux_syscall_next_pc): New.
(arm_linux_copy_svc): Use arm_linux_sigreturn_return_addr instead.
(arm_linux_init_abi): Initialize syscall_next_pc.
* arm-tdep.c (thumb_get_next_pc_raw): Get next pc of SWI in Thumb mode.
(arm_get_next_pc_raw): Get next pc of SWI in ARM mode.
* arm-tdep.h (struct gdbarch_tdep): Add a function pointer syscall_next_pc.
Declare arm_frame_is_thumb.
(linux_create_inferior): Check for __ANDROID__ rather than
__SIGRTMIN.
(enqueue_one_deferred_signal): Don't requeue non-RT signals that
are already deferred.
(linux_wait_1): Check for __ANDROID__ rather than __SIGRTMIN.
(linux_resume_one_thread): Don't queue a SIGSTOP if the lwp is
stopped and already has a pending signal to report.
(proceed_one_lwp): : Don't queue a SIGSTOP if the lwp already has
a pending signal to report or is moving out of a jump pad.
(linux_init_signals): Check for __ANDROID__ rather than
__SIGRTMIN.
(WERROR_CFLAGS): New.
(INTERNAL_CFLAGS): Add WERROR_CFLAGS.
* configure.ac: Introduce --enable-werror, which adds -Werror to
the compiler command line. Enabled by default. Disable with
--disable-werror. Add -Wdeclaration-after-statement
Wpointer-arith and -Wformat-nonliteral to warning flags.
* configure: Regenerate.
(WERROR_CFLAGS): New.
(INTERNAL_CFLAGS): Add WERROR_CFLAGS.
* configure.ac: Introduce --enable-werror, which adds -Werror to
the compiler command line. Enabled by default. Disable with
--disable-werror. Add -Wdeclaration-after-statement
Wpointer-arith and -Wformat-nonliteral to warning flags.
* configure: Regenerate.
(gdbchar): New.
(expect): Use gdbchar. Check for error reading from GDB.
Clarify sync error output.
(play): Check for errors writing to GDB.
* linux-low.c (sigchld_handler): Really ignore `write' errors.
* remote-utils.c (getpkt): Check for errors writing to the remote
descriptor.
* server.c (push_event, queue_stop_reply_callback): Assert we're
not pushing a TARGET_WAITKIND_IGNORE event.
(start_inferior, start_inferior, attach_inferior, handle_v_cont)
(myresume, handle_target_event): Set the thread's last_resume_kind
and last_status from the target returned status.
* linux-x86-low.c (update_debug_registers_callback): New.
(i386_dr_low_set_addr): Use it.
(i386_dr_low_get_addr): New.
(i386_dr_low_set_control): Use update_debug_registers_callback.
(i386_dr_low_get_control): New.
(i386_dr_low_get_status): Adjust.
* linux-low.c (linux_stop_lwp): New.
* linux-low.h (linux_stop_lwp): Declare.
* i386-low.c (I386_DR_GET_RW_LEN): Take the dr7 contents as
argument instead of a i386_debug_reg_state.
(I386_DR_WATCH_HIT): Take the dr6 contents as argument instead of
a i386_debug_reg_state.
(i386_insert_aligned_watchpoint): Adjust.
(i386_remove_aligned_watchpoint): Adjust.
(i386_low_stopped_data_address): Read the debug registers from the
inferior instead of from the mirrors.
* i386-low.h (struct i386_debug_reg_state): Extend comment.
(i386_dr_low_get_addr): Declare.
(i386_dr_low_get_control): Declare.
(i386_dr_low_get_status): Change prototype.
* win32-i386-low.c (dr_status_mirror, dr_control_mirror): New globals.
(i386_dr_low_get_addr): New.
(i386_dr_low_get_control): New.
(i386_dr_low_get_status): Adjust prototype. Return
dr_status_mirror.
(i386_initial_stuff): Clear dr_status_mirror and
dr_control_mirror.
(i386_get_thread_context): Adjust.
(i386_set_thread_context): Adjust.
(i386_thread_added): Adjust.
* dwarf2read.c (dwarf2_per_objfile): New members debug_info_type_hash,
debug_types_type_hash.
(dwarf2_cu, dwarf2_per_cu_data): Delete member type_hash.
All uses updated.
(lookup_die_type): Renamed from tag_type_to_tag. First look in
appropriate type_hash table. All callers updated.
(allocate_signatured_type_table): Renamed from
allocate_signatured_type_hash_table. All callers updated.
(create_signatured_type_table_from_index): Renamed from
create_signatured_type_hash_from_index. All callers updated.
(read_die_type): Add comment. Move actual reading to ...
(read_die_type_1): ... here. New function.
(follow_die_ref_or_sig): Tweak comment.
(set_die_type): Rewrite to use appropriate choice of
debug_info_type_hash or debug_types_type_hash.
(get_die_type_at_offset): New function.
(get_die_type): Call it.
testsuite/
PR symtab/11942
* gdb.dwarf2/dw4-sig-types.cc: New file.
* gdb.dwarf2/dw4-sig-types.h: New file.
* gdb.dwarf2/dw4-sig-types-b.cc: New file.
* gdb.dwarf2/dw4-sig-types.exp: New file.
(arm_psr_thumb_bit): New. Update all uses of CPSR_T to
call this function.
(arm_pc_is_thumb): Add a gdbarch argument. Update all callers.
Check is_m after force-mode.
(arm_gdbarch_init): Check the binary before the target description.
Add check for M profile attribute. If we have an M-profile device,
but no target register description, use arm-with-m. Recognize the
new org.gnu.gdb.arm.m-profile feature and its xpsr register.
(_initialize_arm_tdep): Call initialize_tdesc_arm_with_m.
* arm-tdep.h (XPSR_T): Define.
(struct gdbarch_tdep): Add is_m member.
* features/arm-m-profile.xml, features/arm-with-m.c,
features/arm-with-m.xml: New files.
doc/
* gdb.texinfo (ARM Features): Document
org.gnu.gdb.arm.m-profile.
(read_enumeration_type): Add comment.
(process_enumeration_scope): Move definition of some locals
closer to their use.
(read_namespace_type): Add comment.
(gdbpy_event_fds): Change type to `struct serial *' a array from
int array.
(gdbpy_run_events): Change parameters. Use serial_readchar in
place of read.
(gdbpy_post_event): Use serial_write in place of write.
(gdbpy_initialize_events): Use serial_pipe instead of pipe, and
serial_async in place of add_file_handler.
* serial.c (serial_interface_lookup): Take a const char pointer.
(serial_fdopen): Rename to ...
(serial_fdopen_ops): ... this. Add an OPS parameter and use it.
Call the OPS' fdopen function if there is one.
(serial_fdopen): Rewrite as wrapper to serial_fdopen_ops.
(serial_pipe): New.
(struct serial_ops) <fdopen>: New field.
* ser-mingw.c (free_pipe_state):
(free_pipe_state): Close output on non-pex pipes.
(pipe_windows_fdopen): New.
(gdb_pipe): New.
(_initialize_ser_windows): Register pipe_windows_fdopen.
* ser-go32.c (gdb_pipe): New.
* ser-pipe.c (pipe_close): Close file descriptor even if there's
no state pointer.
(pipe_ops): Delete.
(gdb_pipe): New.
* dwarf2read.c (struct delayed_method_info): New struct.
(struct dwarf2_cu): Add vector method_list.
(scan_partial_symbols): Count methods for union, class, structure,
and interface types.
(add_to_method_list): New function.
(free_delayed_list): New function.
(compute_delayed_physnames): New function.
(process_full_comp_unit): Make a cleanup for the CU's delayed
physname list, compute the delayed physnames, and free the
the list.
(dwarf2_add_member_fn): For C++ and Java, delay the computation
of the physname until after the CU is read.
* dwarf2read.c (read_structure_type): Check if the current
DIE's type was already completed after dwarf2_full_name
was called.
* gdb.dwarf2/pr11465.exp: New test.
* gdb.dwarf2/pr11465.S: New file.
* gdb.dwarf2/dw2-double-set-die-type.S: New file.
* gdb.dwarf2/dw2-double-set-die-type.exp: New test.
registers. Update data sets with the new v2_double element in the
VSX register union. Add vector_register3_vr data set for the AltiVec
registers. Use gdb_test_no_output instead of send_gdb.
See http://sourceware.org/ml/gdb/2010-07/msg00118.html for
a description of the problem. Namely, the file and fullname
fields are inverted in the output of the -file-list-exec-source-files
GDB/MI command:
(gdb) interpreter-exec mi -file-list-exec-source-files
^done,files=[{file="/takamaka.a/brobecke/ex/list-exec-source-files/foo.c",fullname="foo.c"},{file="/takamaka.a/brobecke/ex/list-exec-source-files/foo.c",fullname="foo.c"},{file="",fullname="init.c"},{file="",fullname="../sysdeps/x86_64/elf/start.S"},{file="",fullname="../sysdeps/x86_64/elf/start.S"}]
It turns out to be a silly thinko: The map_symbol_filenames function
calls the psymtab version of map_symbol_filenames routine, and this
version called the callback function with filename and fullname
in the wrong order (fullname/filename instead of filename/fullname).
The routine description in symfile.h confirst that expected order for
the FUN callback parameters:
/* Call a callback for every file defined in OBJFILE. FUN is the
callback. It is passed the file's name, the file's full name,
and the DATA passed to this function. */
void (*map_symbol_filenames) (struct objfile *objfile,
void (*fun) (const char *, const char *,
void *),
void *data);
Fixing this error uncovered another location where the arguments
were reversed: maybe_add_partial_symtab_filename. Once the first
error was fixed, the debugger would crash while attempting to do
completion, because it was given a NULL fullname instead of the
non-NULL filename.
gdb/ChangeLog:
* psymtab.c (map_symbol_filenames_psymtab): Call FUN with
the arguments in the correct order.
* symtab.c (maybe_add_partial_symtab_filename): Declare
the arguments in the correct order.
* varobj.c (varobj_create): Replace variable old_fi with old_id,
initialize it by null_frame_id, wrap its usage by get_frame_id,
frame_id_p and frame_find_by_id.
* gdb.base/callfuncs.exp (set_lang_c): Delete, set c language directly.
* gdb.base/printcmds.exp (set_lang_c): Delete, set c language directly.
Simplify, early exit if runto_main fails.
* gdb.fortran/exprs.exp: load_lib fortran.exp.
(set_lang_fortran): Moved to lib/fortran.exp.
* gdb.fortran/types.exp: load_lib fortran.exp.
(set_lang_fortran): Moved to lib/fortran.exp.
* gdb.java/jmisc.exp (set_lang_java): Moved to lib/java.exp.
* gdb.java/jprint.exp (set_lang_java): Ditto.
* gdb.java/jv-exp.exp: load_lib java.exp.
If set_lang_java fails, issue a warning instead of failure to be
consistent with other set_lang_foo uses.
(set_lang_java): Moved to lib/java.exp.
* gdb.java/jv-print.exp (set_lang_java): Moved to lib/java.exp.
If set_lang_java fails, issue a warning instead of failure to be
consistent with other set_lang_foo uses.
* gdb.pascal/types.exp: load_lib pascal.exp.
(set_lang_pascal): Moved to lib/pascal.exp.
* lib/fortran.exp: New file.
* lib/java.exp (set_lang_java): New function.
* lib/pascal.exp (set_lang_pascal): New function.
PR corefile/8210
bfd/
* bfd-in2.h: Regenerate.
* corefile.c (bfd_core_file_pid): New.
* targets.c (BFD_JUMP_TABLE_CORE): Add NAME##_core_file_pid.
(struct bfd_target) <_core_file_pid>: New.
* libbfd-in.h (_bfd_nocore_core_file_pid): Declare.
* libbfd.c (_bfd_nocore_core_file_pid): New.
* elf-bfd.h (bfd_elf32_core_file_pid, bfd_elf64_core_file_pid):
Declare.
* elfcode.h (elf_core_file_pid): New define.
* elfcore.h (elf_core_file_pid): New function.
* elf.c (elfcore_make_pid): Rewrite.
(elfcore_grok_prstatus): Only set core_pid if not set yet.
(elfcore_grok_prstatus) [!HAVE_PRSTATUS_T_PR_WHO]: Fallback to
getting the lwpid from prstat.pr_pid.
* elf64-x86-64.c (elf64_x86_64_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
(elf64_x86_64_grok_psinfo): Extract the the main process's PID,
and store it in elf_tdata's core_pid field.
* elf32-i386.c (elf_i386_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
(elf_i386_grok_psinfo): Extract the the main process's PID, and
store it in elf_tdata's core_pid field.
* elf32-am33lin.c (elf32_am33lin_grok_prstatus): Write the LWPID
to elf_tdata's core_lwpid instead of to core_pid.
* elf32-arm.c (elf32_arm_nabi_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-cris.c (cris_elf_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-frv.c (elf32_frv_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-hppa.c (elf32_hppa_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-mips.c (elf32_mips_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-ppc.c (ppc_elf_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-s390.c (elf_s390_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-score.c (s3_bfd_score_elf_grok_prstatus): Write the LWPID
to elf_tdata's core_lwpid instead of to core_pid.
* elf32-score7.c (s7_bfd_score_elf_grok_prstatus): Write the LWPID
to elf_tdata's core_lwpid instead of to core_pid.
* elf32-sh.c (elf32_shlin_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf32-xtensa.c (elf_xtensa_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf64-hppa.c (elf64_hppa_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf64-mips.c (elf64_mips_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elf64-ppc.c (ppc64_elf_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* elfn32-mips.c (elf32_mips_grok_prstatus): Write the LWPID to
elf_tdata's core_lwpid instead of to core_pid.
* plugin.c (bfd_plugin_core_file_pid): New function.
* aout-target.h (MY_core_file_pid): Define.
* aout-tic30.c (MY_core_file_pid, MY_core_file_p): New defines.
* coff-rs6000.c (coff_core_file_pid): New define.
(rs6000coff_vec, pmac_xcoff_vec): Use BFD_JUMP_TABLE_CORE.
* coff64-rs6000.c (coff_core_file_pid): New define.
(rs6000coff64_vec): Use BFD_JUMP_TABLE_CORE.
(xcoff64_core_file_pid): New define.
(aix5coff64_vec): Use BFD_JUMP_TABLE_CORE.
* mach-o-target.c (bfd_mach_o_core_file_pid): New define.
* aix386-core.c (aix386_core_file_pid): New define.
* hppabsd-core.c (hppabsd_core_core_file_pid): New define.
* hpux-core.c (hpux_core_core_file_pid): New define.
* irix-core.c (irix_core_core_file_pid): New define.
* lynx-core.c (lynx_core_file_pid): New define.
* osf-core.c (osf_core_core_file_pid): New define.
* ptrace-core.c (ptrace_unix_core_file_pid): New define.
* sco5-core.c (sco5_core_file_pid): New define.
* xcoff-target.h (coff_core_file_pid): New define.
* netbsd-core.c (netbsd_core_core_file_pid): New define.
gdb/
2010-08-18 Pedro Alves <pedro@codesourcery.com>
PR corefile/8210
gdb/
* corelow.c (add_to_thread_list): Don't use
gdbarch_core_reg_section_encodes_pid. Use bfd_core_file_pid.
(get_core_register_section): Don't use
gdbarch_core_reg_section_encodes_pid.
* gdbarch.sh (core_reg_section_encodes_pid): Delete.
* gdbarch.h, gdbarch.c: Regenerate.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Don't set
gdbarch_core_reg_section_encodes_pid.
* i386-sol2-tdep.c (i386_sol2_init_abi): Ditto.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Ditto.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Ditto.
revert it back, and re-apply the correct patch again.
2010-08-18 Yao Qi <yao@codesourcery.com
* gdb.dwarf2/dw2-ref-missing-frame-func.c: Add .p2align 4 for labels
func_nofb_start and func_loopfb_start, so that address of functions
is equal to these labels on Thumb.
* gdb.dwarf2/dw2-ref-missing-frame-func.c: Add .p2align 4 for labels
func_nofb_start and func_loopfb_start, so that address of functions
is equal to these labels on Thumb.
2010-08-17 Pedro Alves <pedro@codesourcery.com>
PR breakpoints/11371
* breakpoint.c (breakpoint_init_inferior): Decrement the
location's reference count instead of deleting right away.
(bpstat_free): Decrement the location's reference count. Make
static.
(bpstat_copy): Increment the location's reference count.
(bpstat_find_breakpoint): Adjust.
(bpstat_num): Adjust.
(print_it_typical): Adjust. Use the breakpoint pointer in the
bpstat instead of the location's owner.
(bpstat_alloc): Remove const qualifier from the 'bl' parameter.
Adjust to record the location's owner in the bpstat.
(watchpoint_check): Use the breakpoint pointer in the bpstat
instead of the location's owner.
(bpstat_check_breakpoint_conditions): Don't handle
bp_watchpoint_scope here. Use the breakpoint pointer in the
bpstat instead of the location's owner.
(bpstat_stop_status): Defer inferior function calls to after
building the bpstat list. Handle bp_watchpoint_scope here. Use
the breakpoint pointer in the bpstat instead of the location's
owner.
(bpstat_what): Use the breakpoint pointer in the bpstat instead of
the location's owner.
(free_bp_location): Don't walk bpstats clearing locations.
(incref_bp_location): New.
(decref_bp_location): New.
(breakpoint_auto_delete): Use the breakpoint pointer in the bpstat
instead of the location's owner.
(update_global_location_list): Clear the location's owner, and
decrement the location's reference count instead of deleting it
right away.
(breakpoint_retire_moribund): Decrement the location's reference
count instead of deleting it right away.
(bpstat_remove_bp_location): Delete.
(bpstat_remove_breakpoint): New.
(bpstat_remove_bp_location_callback): Delete.
(bpstat_remove_breakpoint_callback): New.
(delete_breakpoint): Iterate over all threads' stop_bpstat's
clearing references to the breakpoint that is being deleted.
* breakpoint.h (struct bp_location) <refc>: New field.
<owner>: Update comments.
(bpstat_free): Delete declaration.
(struct bpstats): Change the type of the breakpoint_at field to
struct breakpoint point, from struct bp_location pointer. Add new
field bp_location_at.
gdb/testsuite/
2010-08-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <pedro@codesourcery.com>
PR breakpoints/11371
* gdb.base/watch-cond-infcall.exp: New file.
* gdb.base/watch-cond-infcall.c: New file.
* breakpoint.c (update_watchpoint): Add source empty line. Prefer
EXP_STRING_REPARSE to EXP_STRING.
(watch_command_1): Set also EXP_STRING_REPARSE.
(delete_breakpoint): Free also EXP_STRING_REPARSE.
* breakpoint.h (struct breakpoint): New field exp_string_reparse.
Update comment for exp_string.
Pedro Alves <pedro@codesourcery.com>
* dwarf2read.c: Include "c-lang.h" and "valprint.h".
(struct dwarf2_per_objfile) <reading_partial_symbols>: New field.
(struct partial_die_info) <has_template_arguments>: New field.
<num_attrs>: Change type to unsigned char.
<building_fullname>: New field.
(dwarf2_build_psymtabs_hard): Set reading_partial_symbols. Only
allocate a CU if we don't have one already. Add a cleanup for the
CU.
(partial_die_full_name): Handle template arguments not in
DW_AT_name.
(dwarf2_psymtab_to_symtab): Clear reading_partial_symbols.
(load_full_comp_unit): Only allocate a CU if we don't have one
already.
(do_ui_file_peek_last): New.
(dwarf2_compute_name): Handle template parameters not in
DW_AT_name.
(read_comp_unit): Read and free abbrevs if not read yet.
(load_partial_dies): Handle template arguments not in DW_AT_name.
(find_partial_die): If we have a CU, but no a partial dies yet,
also read in the CU.
(dwarf2_const_value_attr): New, abstracted out from
dwarf2_const_value.
(dwarf2_const_value, dwarf2_const_value_data): Adjust to use
dwarf2_const_value_attr.
(determine_prefix): Detect and break loops created by RCVT's debug
info.
(maybe_queue_comp_unit): Bail out early if reading partial
symbols.
(follow_die_offset): Load full CU if we have no dies.
* dwarf2loc.c (dwarf2_evaluate_loc_desc): Make public.
* dwarf2loc.h (dwarf2_evaluate_loc_desc): Declare.
Code cleanup.
* frame-unwind.c (frame_unwind_find_by_frame): Remove the return type
and returned value. New comment from frame-unwind.h.
* frame-unwind.h (frame_unwind_find_by_frame): Remove the return type.
Extend the comment.
* frame.c (get_frame_id, frame_unwind_register_value)
(create_new_frame, get_prev_frame_1, frame_unwinder_is)
(get_frame_type, frame_unwind_arch): Do not use the return value of
frame_unwind_find_by_frame.
`target_has_execution' check with `to_has_memory' check.
(gdbsim_has_all_memory, gdbsim_has_memory): New functions.
(init_gdbsym_ops): Initialize relevant fields of `gdbsim_ops'
with `gdbsim_has_all_memory' and `gdbsim_has_memory'.
(resume_siggnal, resume_step): Move these static globals...
(struct sim_inferior_data): ...into this new struct.
(sim_inferior_data_key, next_pid, sim_argv, gdbsim_is_open):
New static globals.
(gdb_callback, callbacks_initialized): Move these globals to
a point earlier in the file.
(check_for_duplicate_sim_descriptor, get_sim_inferior_data)
(get_sim_inferior_data_by_ptid, sim_inferior_data_cleanup)
(gdbsim_close_inferior, gdbsim_resume_inferior)
(gdbsim_stop_inferior): New functions.
(SIM_INSTANCE_NOT_NEEDED, SIM_INSTANCE_NEEDED, INITIAL_PID):
New constants.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_load)
(gdbsim_create_inferior, gdbsim_open, gdbsim_close, gdbsim_resume)
(gdbsim_stop, gdbsim_cntrl_c, gdbsim_wait)
(gdbsim_xfer_inferior_memory, gdbsim_files_info)
(gdbsim_mourn_inferior, simulator_command, gdbsim_thread_alive,
(gdbsim_pid_to_str): Invoke `get_sim_inferior_data' to set
new local variable `sim_data' in each of these functions. Use
`sim_data' to reference former globals `program_loaded',
`gdbsim_desc', `remote_sim_ptid', `resume_siggnal', and
`resume_step'.
(gdbsim_open): Remove local variable `argv'. Put results of call
to `gdb_buildargv' in `sim_argv' rather than in `argv'. Don't
make a cleanup for it. Free it though when a sim instance cannot
be obtained.
(gdbsim_close): Free sim_argv and null it out as appropriate.
Close sim instances in all inferiors.
(gdbsim_cntrl_c): Stop all inferiors.
(gdbsim_wait):
(_initialize_remote_sim): Initialize `sim_inferior_data_key'.
2010-08-09 Sami Wagiaalla <swagiaal@redhat.com>
* dwarf2read.c (new_symbol): Add symbol to variable list at end of
function after symbol construction is complete.
Do the same for template symbol addition to template_symbols list.
2010-08-09 Sami Wagiaalla <swagiaal@redhat.com>
* symtab.c (symbol_get_demangled_name): Remove assertion and
return NULL when language_specific.cplus_specific is not initialized.
* stabsread.c (define_symbol): Set the name before calling
cp_scan_for_anonymous_namespaces.
(gdb_wants_all_stopped): Delete.
(linux_wait_1): Don't call them.
* server.c (handle_v_cont): Tag all threads as want-stopped.
(gdb_wants_thread_stopped): Fix comments. Tag the thread that
stopped as "client-wants-stopped".
Throughout, call read_encoded_value with ptr_size rather than addr_size.
(decode_frame_entry_1): Remove redundant setting of
addr_size. Call gdbarch_dwarf2_addr_size rather than gdbarch_ptr_bit
to determine addr_size in Dwarf versions < 4. Set ptr_size dependent
on examined frame section. Add comment to explain why.
* gdbarch.sh (dwarf2_addr_size): Define as variable. Add lengthy
comment to explain usage.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Set dwarf2_addr_size to 4.
* linux-thread-db.c (libthread_db_debug): New variable.
(thread_db_find_new_threads_silently): Control verbosity with it.
(try_thread_db_load_1, try_thread_db_load): Likewise.
(find_new_threads_once): Likewise.
(_initialize_thread_db): Set/show it.
doc/ChangeLog
2010-07-31 Paul Pluzhnikov <ppluzhnikov@google.com>
* gdb.texinfo (Threads): Document 'debug libthread-db'.
* common/signals.c (signals): Move the content to signals.def.
Include it. Remove the INDENT comments.
gdb/gdbserver/
* Makefile.in (signals_def): New.
(server_h): Append include/gdb/signals.h and signals_def.
(server.o): Append signals_def.
include/gdb/
* signals.h (enum target_signal): Move the content to signals.def.
Include it.
* signals.def: New file.