Fixes, in C++ mode:
../../src/gdb/common/common-exceptions.c:23:69: error: invalid conversion from ‘int’ to ‘return_reason’ [-fpermissive]
const struct gdb_exception exception_none = { 0, GDB_NO_ERROR, NULL };
^
(I considered adding an enum value for '0', but the code and comments
around return_reason and its uses explain how 0 is special/internal,
so I'm leaving it be.)
gdb/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (exception_none): Add cast.
In C++, this:
try
{
break;
}
catch (..)
{}
is invalid. However, because our TRY/CATCH macros support it in C,
the C++ version of those macros support it too. To catch such
assumptions, this adds a (disabled) hack that maps TRY/CATCH to raw
C++ try/catch. Then it goes through all instances that building on
x86_64 GNU/Linux trips on, fixing them.
This isn't strictly necessary yet, but I think it's nicer to try to
keep the tree in a state where it's easier to eliminate the TRY/CATCH
macros.
gdb/ChangeLog:
2015-10-29 Pedro Alves <palves@redhat.com>
* dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Don't
assume that "break" breaks out of a TRY/CATCH.
* python/py-framefilter.c (py_print_single_arg): Don't assume
"continue" breaks out of a TRY/CATCH.
* python/py-value.c (valpy_binop_throw): New function, factored
out from ...
(valpy_binop): ... this.
(valpy_richcompare_throw): New function, factored
out from ...
(valpy_richcompare): ... this.
* solib.c (solib_read_symbols): Don't assume "break" breaks out
of a TRY/CATCH.
* common/common-exceptions.h [USE_RAW_CXX_TRY]
<TRY/CATCH/END_CATCH>: Define as 1-1 wrappers around try/catch.
Fixes a set of errors like:
../../src/gdb/symfile-debug.c: In function ‘int debug_qf_map_symtabs_matching_filename(objfile*, const char*, const char*, int (*)(symtab*, void*), void*)’:
../../src/gdb/symfile-debug.c:137:39: error: invalid conversion from ‘int (*)(symtab*, void*)’ to ‘const void*’ [-fpermissive]
host_address_to_string (callback),
^
Note this has to work with data and function pointers. In C++11 we
may perhaps do something a bit safer, but we're not there yet, and I
don't think it really matters. For now just always do a simple
C-style cast in host_address_to_string itself. No point in adding a
void * cast to each and every caller.
gdb/ChangeLog:
2015-10-27 Pedro Alves <palves@redhat.com>
* common/print-utils.c (host_address_to_string): Rename to ...
(host_address_to_string_1): ... this.
* common/print-utils.h (host_address_to_string): Reimplement as
wrapper around host_address_to_string_1.
* utils.c (gdb_print_host_address): Rename to ...
(gdb_print_host_address_1): ... this.
* utils.h (gdb_print_host_address): Reimplement as wrapper macro
around host_address_to_string_1.
gdb/ChangeLog:
* common/gdb_wait.h (W_STOPCODE): Define, moved here from
gdbserver/linux-low.c.
(WSETSTOP): Simplify.
gdb/gdbserver/ChangeLog:
* linux-low.c (W_STOPCODE): Moved to common/gdb_wait.h.
Nowadays, both aarch64 GDB and linux kernel assumes that address for
setting breakpoint should be 4-byte aligned. However that is not true
after we support multi-arch, because thumb instruction can be at 2-byte
aligned address. Patch http://lists.infradead.org/pipermail/linux-arm-kernel/2015-October/375141.html
to linux kernel is to teach kernel to handle 2-byte aligned address for
HW breakpoint, while this patch is to teach aarch64 GDB handle 2-byte
aligned address.
First of all, we call gdbarch_breakpoint_from_pc to get the instruction
length rather than using hard-coded 4. Secondly, in GDBserver, we set
length back to 2 if it is 3, because GDB encode 3 in it to indicate it
is a 32-bit thumb breakpoint. Then we relax the address alignment
check from 4-byte aligned to 2-byte aligned.
This patch enables some tests (such as gdb.base/break-idempotent.exp,
gdb.base/cond-eval-mode.exp, gdb.base/watchpoint-reuse-slot.exp,) and
fixes many fails (such as gdb.base/hbreak2.exp) when the program is
compiled in thumb mode on aarch64.
Regression tested on aarch64-linux, both native and gdbserver. This
is the last patch of multi-arch work.
gdb:
2015-10-15 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint):
Call gdbarch_breakpoint_from_pc to instruction length.
(aarch64_linux_remove_hw_breakpoint): Likewise.
* common/common-regcache.h (regcache_register_size): Declare.
* nat/aarch64-linux-hw-point.c: Include "common-regcache.h".
(aarch64_point_is_aligned): Set alignment to 2 for breakpoint if
the process is 32bit, otherwise set alignment to 4.
(aarch64_handle_breakpoint): Update comments.
* regcache.c (regcache_register_size): New function.
gdb/gdbserver:
2015-10-15 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_insert_point): Set len to 2
if it is 3.
(aarch64_remove_point): Likewise.
* regcache.c (regcache_register_size): New function.
Nowadays, GDB calls target_can_download_tracepoint at the entry of
download_tracepoint_locations, which is called by.
update_global_location_list. Sometimes, it is not needed to call
target_can_download_tracepoint at all because there is no tracepoint
created. In remote target, target_can_download_tracepoint send
qTStatus to the remote in order to know whether tracepoint can be
downloaded or not. This means some redundant qTStatus packets are
sent.
This patch is to teach GDB to call target_can_download_tracepoint
lazily, only on the moment there are tracepoint to download.
gdb.perf/single-step.exp (with a local patch to measure RSP packets)
shows the number of RSP packets is reduced because there is no
tracepoint at all, so GDB doesn't send qTStatus any more.
# of RSP packets
original patched
single-step rsp 1000 7000 6000
single-step rsp 2000 14000 12000
single-step rsp 3000 21000 18000
single-step rsp 4000 28000 24000
gdb:
2015-09-10 Yao Qi <yao.qi@linaro.org>
* breakpoint.c (download_tracepoint_locations): New local
can_download_tracepoint. Check the result of
target_can_download_tracepoint and save it in
can_download_tracepoint if there are tracepoints to download.
* linux-nat.h (enum tribool): Move it to ...
* common/common-types.h: ... here.
After the last gnulib import (Dec 2012), gnulib upstream started
replacing mingw's 'struct timeval' with a version with 64-bit time_t,
for POSIX compliance:
commit f8e84098084b3b53bc6943a5542af1f607ffd477
Author: Bruno Haible <bruno@clisp.org>
Date: Sat Jan 28 18:12:10 2012 +0100
sys_time: Override 'struct timeval' on some native Windows platforms.
See:
https://lists.gnu.org/archive/html/bug-gnulib/2012-01/msg00372.html
However, that results in conflicts with native Winsock2's 'select':
select()'s argument
http://sourceforge.net/p/mingw-w64/mailman/message/29610438/
... and libiberty's timeval-utils.h timeval_add/timeval_sub, at the
least.
We don't really need the POSIX compliance, so this patch prepares us
to simply not use gnulib's 'struct timeval' replacement once a more
recent gnulib is imported, thus preserving the current behavior, by
adding a sys/time.h wrapper header that undefs gnulib's replacements,
and including that everywhere instead.
The SIZE -> OSIZE change is necessary because newer gnulib's
sys/time.h also includes windows.h/winsock2.h, which defines a
conflicting SIZE symbol.
Cross build-tested mingw-w64 32-bit and 64-bit.
Regtested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_sys_time.h.
* common/gdb_sys_time.h: New file.
* event-loop.c: Include gdb_sys_time.h instead of sys/time.h.
* gdb_select.h: Likewise.
* gdb_usleep.c: Likewise.
* maint.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.h: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote.c: Likewise.
* ser-base.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* symfile.c: Likewise.
* symfile.c: Likewise. Rename OSIZE to SIZE throughout.
* target-memory.c: Include gdb_sys_time.h instead of sys/time.h.
* utils.c: Likewise.
gdb/gdbserver/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* debug.c: Include gdb_sys_time.h instead of sys/time.h.
* event-loop.c: Likewise.
* remote-utils.c: Likewise.
* tracepoint.c: Likewise.
This field was never set nor used. This patch removes it.
gdb/ChangeLog:
* common/agent.c (symbol_list) <required>: Remove.
gdb/gdbserver/ChangeLog:
* tracepoint.c (symbol_list) <required>: Remove.
Later patches need regex support also in gdbserver.
gdb/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
common/gdb_regex.h.
(COMMON_OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
--without-included-regex and USE_INCLUDED_REGEX.
* common/gdb_regex.c: New file from utils.c functions.
* common/gdb_regex.h: Move it here from gdb_regex.h, update include
file wrapping define name.
* configure: Rebuilt.
* configure.ac (gdb_use_included_regex, --without-included-regex)
(USE_INCLUDED_REGEX): Move them to common/common.m4.
* gdb_regex.h: Move it to common/gdb_regex.h.
* utils.c: Remove include gdb_regex.h.
(do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
(compile_rx_or_error): Move them to common/gdb_regex.c.
gdb/gdbserver/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* config.in: Rebuilt.
* configure: Rebuilt.
Fix the ARI warning about the use of unsigned long long. We can't use
ULONGEST as this is defined unsigned long on 64-bit systems. This will
result in a compile error when storing a pointer to an unsigned long long
structure field (declared in perf_event.h as __u64) in a ULONGEST * variable.
Use size_t to hold the buffer size inside GDB and __u64 when interfacing the
Linux kernel.
gdb/
* nat/linux-btrace.c (perf_event_read): Change the type of DATA_HEAD.
(perf_event_read_all): Change the type of SIZE and DATA_HEAD.
(perf_event_read_bts): Change the type of SIZE and READ.
(linux_enable_bts): Change the type of SIZE, PAGES, DATA_SIZE,
and DATA_OFFSET. Move DATA_SIZE declaration. Restrict the buffer size
to UINT_MAX. Check for overflows when using DATA_HEAD from the perf
mmap page.
(linux_enable_pt): Change the type of PAGES and SIZE. Restrict the
buffer size to UINT_MAX.
(linux_read_bts): Change the type of BUFFER_SIZE, SIZE, DATA_HEAD, and
DATA_TAIL.
* nat/linux-btrace.h (struct perf_event_buffer)<size, data_head>
<last_head>: Change type.
* common/btrace-common.h (struct btrace_dat_pt) <size>: Change type.
* common/btrace-common.c (btrace_data_append): Change the type of
SIZE.
* btrace.c (parse_xml_raw): Change the type of SIZE. Change oddness
check.
Store the raw branch trace data that has been read from the target.
This data can be used for maintenance commands as well as for generating
a core file for the "record save" command.
gdb/
* btrace.c (btrace_fetch): Append the new trace data.
(btrace_clear): Clear the stored trace data.
* btrace.h (btrace_thread_info) <data>: New.
* common/btrace-common.h (btrace_data_clear)
(btrace_data_append): New.
* common/btrace-common.c (btrace_data_clear)
(btrace_data_append): New.
Adds a new command "record btrace pt" to configure the kernel to use
Intel(R) Processor Trace instead of Branch Trace Strore.
The "record btrace" command chooses the tracing format automatically.
Intel(R) Processor Trace support requires Linux 4.1 and libipt.
gdb/
* NEWS: Announce new commands "record btrace pt" and "record pt".
Announce new options "set|show record btrace pt buffer-size".
* btrace.c: Include "rsp-low.h".
Include "inttypes.h".
(btrace_add_pc): Add forward declaration.
(pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
(pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
(btrace_compute_ftrace_pt): New.
(btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
(check_xml_btrace_version): Update version check.
(parse_xml_raw, parse_xml_btrace_pt_config_cpu)
(parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
(btrace_pt_config_cpu_attributes, btrace_pt_config_children)
(btrace_pt_children): New.
(btrace_children): Add support for "pt".
(parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
(btrace_conf_children): Add support for "pt".
* btrace.h: Include "intel-pt.h".
(btrace_pt_error): New.
* common/btrace-common.c (btrace_format_string, btrace_data_fini)
(btrace_data_empty): Support BTRACE_FORMAT_PT.
* common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
(struct btrace_config_pt): New.
(struct btrace_config)<pt>: New.
(struct btrace_data_pt_config, struct btrace_data_pt): New.
(struct btrace_data)<pt>: New.
* features/btrace-conf.dtd (btrace-conf)<pt>: New.
(pt): New.
* features/btrace.dtd (btrace)<pt>: New.
(pt, pt-config, cpu): New.
* nat/linux-btrace.c (perf_event_read, perf_event_read_all)
(perf_event_pt_event_type, kernel_supports_pt)
(linux_supports_pt): New.
(linux_supports_btrace): Support BTRACE_FORMAT_PT.
(linux_enable_bts): Free tinfo on error.
(linux_enable_pt): New.
(linux_enable_btrace): Support BTRACE_FORMAT_PT.
(linux_disable_pt): New.
(linux_disable_btrace): Support BTRACE_FORMAT_PT.
(linux_fill_btrace_pt_config, linux_read_pt): New.
(linux_read_btrace): Support BTRACE_FORMAT_PT.
* nat/linux-btrace.h (struct btrace_tinfo_pt): New.
(struct btrace_target_info)<pt>: New.
* record-btrace.c (set_record_btrace_pt_cmdlist)
(show_record_btrace_pt_cmdlist): New.
(record_btrace_print_pt_conf): New.
(record_btrace_print_conf): Support BTRACE_FORMAT_PT.
(btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
(cmd_record_btrace_pt_start): New.
(cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
(cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
(_initialize_record_btrace): Add new commands.
* remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
(remote_protocol_features): Add "Qbtrace:pt".
Add "Qbtrace-conf:pt:size".
(remote_supports_btrace): Support BTRACE_FORMAT_PT.
(btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
(remote_enable_btrace): Support BTRACE_FORMAT_PT.
(_initialize_remote): Add new commands.
gdbserver/
* linux-low.c: Include "rsp-low.h"
(linux_low_encode_pt_config, linux_low_encode_raw): New.
(linux_low_read_btrace): Support BTRACE_FORMAT_PT.
(linux_low_btrace_conf): Support BTRACE_FORMAT_PT.
(handle_btrace_enable_pt): New.
(handle_btrace_general_set): Support "pt".
(handle_btrace_conf_general_set): Support "pt:size".
doc/
* gdb.texinfo (Process Record and Replay): Spell out that variables
and registers are not available during btrace replay.
Describe the new "record btrace pt" command.
Describe the new "set|show record btrace pt buffer-size" options.
(General Query Packets): Describe the new Qbtrace:pt and
Qbtrace-conf:pt:size packets.
Expand "bts" to "Branch Trace Store".
Update the branch trace DTD.
stdint.h was added to common-defs.h some months ago and should
no longer be included directly by any file.
gdb_assert.h was added to common-defs.h nearly a year ago, but
three includes have crept in since then.
This commit removes all such redundant include directives.
gdb/ChangeLog:
* common/buffer.c (stdint.h): Do not include.
* common/print-utils.c (stdint.h): Likewise.
* compile/compile-c-symbols.c (gdb_assert.h): Likewise.
* compile/compile-c-types.c (gdb_assert.h): Likewise.
* ft32-tdep.c (gdb_assert.h): Likewise.
* guile/scm-utils.c (stdint.h): Likewise.
* i386-linux-tdep.c (stdint.h): Likewise.
* i386-tdep.c (stdint.h): Likewise.
* nat/linux-btrace.c (stdint.h): Likewise.
* nat/linux-btrace.h (stdint.h): Likewise.
* nat/linux-ptrace.c (stdint.h): Likewise.
* nat/mips-linux-watch.h (stdint.h): Likewise.
* ppc-linux-nat.c (stdint.h): Likewise.
* python/python-internal.h (stdint.h): Likewise.
* stub-termcap.c (stdlib.h): Likewise.
* target/target.h (stdint.h): Likewise.
* xtensa-linux-nat.c (stdint.h): Likewise.
gdb/gdbserver/ChangeLog:
* linux-i386-ipa.c (stdint.h): Do not include.
* lynx-i386-low.c (stdint.h): Likewise.
* lynx-ppc-low.c (stdint.h): Likewise.
* mem-break.c (stdint.h): Likewise.
* thread-db.c (stdint.h): Likewise.
* tracepoint.c (stdint.h): Likewise.
* win32-low.c (stdint.h): Likewise.
Adapt code in remote.c to take into account addressable unit size when
reading/writing memory.
A few variables are renamed and suffixed with _bytes or _units. This
way, it's more obvious if there is any place where we add or compare
values of different kinds (which would be a mistake).
gdb/ChangeLog:
* common/rsp-low.c (needs_escaping): New.
(remote_escape_output): Add unit_size parameter. Refactor to
support multi-byte addressable units. Rename parameters.
* common/rsp-low.h (remote_escape_output): Add unit_size
parameter and rename others. Update doc.
* remote.c (align_for_efficient_write): New.
(remote_write_bytes_aux): Add unit_size parameter and use it.
Rename some variables. Update doc.
(remote_xfer_partial): Get unit size and use it.
(remote_read_bytes_1): Add unit_size parameter and use it.
Rename some variables. Update doc.
(remote_write_bytes): Same.
(remote_xfer_live_readonly_partial): Same.
(remote_read_bytes): Same.
(remote_flash_write): Update call to remote_write_bytes_aux.
(remote_write_qxfer): Update call to remote_escape_output.
(remote_search_memory): Same.
(remote_hostio_pwrite): Same.
gdb/gdbserver/ChangeLog:
* server.c (write_qxfer_response): Update call to
remote_escape_output.
This commit moves the function make_cleanup_close from gdb/utils.[ch]
to gdb/common/filestuff.[ch] to make it usable from common code.
gdb/ChangeLog:
* utils.h (make_cleanup_close): Moved to common/filestuff.h.
* utils.c (do_close_cleanup): Moved to common/filestuff.c.
(make_cleanup_close): Likewise.
* common/filestuff.h (make_cleanup_close): Moved from utils.h.
* common/filestuff.c (do_close_cleanup): Moved from utils.c.
(make_cleanup_close): Likewise.
inf_child_fileio_open and its gdbserver equivalent both assume that
the mode_t bits defined in gdb/fileio.h are the same as those used
by the open system call, but there is no mechanism to ensure this is
the case. This commit adds a conversion function to handle systems
where the File-I/O definitions do not align with the host's.
gdb/ChangeLog:
* common/fileio.h (fileio_to_host_mode): New declaration.
* common/fileio.c (fileio_to_host_mode): New Function.
* inf-child.c (inf_child_fileio_open): Process mode argument
with fileio_to_host_mode.
gdb/gdbserver/ChangeLog:
* hostio.c (handle_open): Process mode argument with
fileio_to_host_mode.
This commit fixes a typo in common/fileio.c where S_IWGRP was
misspelled as S_IWRGRP in a preprocessor conditional, causing
Host-I/O "vFile:fstat:" and File-I/O "Fstat" and "Ffstat"
responses to always indicate files were not group-writable
regardless of their actual status.
This commit introduces a new shared function to replace three
identical functions in various places in the codebase.
gdb/ChangeLog:
* common/common-remote-fileio.h (remote_fileio_to_fio_error):
New declaration.
* common/common-remote-fileio.c (remote_fileio_to_fio_error):
New function, factored out the named functions below.
* inf-child.c (gdb/fileio.h): Remove include.
(common-remote-fileio.h): New include.
(inf_child_errno_to_fileio_error): Remove function. Update
all callers to use remote_fileio_to_fio_error.
* remote-fileio.c (remote_fileio_errno_to_target): Likewise.
gdb/gdbserver/ChangeLog:
* hostio-errno.c (errno_to_fileio_error): Remove function.
Update caller to use remote_fileio_to_fio_error.
Forward declarations of struct stat break the Windows build.
This commit removes a forward declaration of struct stat and
includes sys/stat.h directly instead.
gdb/ChangeLog:
PR gdb/18131
* common/common-remote-fileio.h (sys/stat.h): New include.
(stuct stat): Remove forward declaration.
This reverts 366c75fc.
We don't actually need to access the object through
"struct sockaddr *", so we don't need the union:
https://sourceware.org/ml/gdb-patches/2015-03/msg00213.html
gdb/ChangeLog:
2015-03-09 Pedro Alves <palves@redhat.com>
Revert:
2015-03-07 Pedro Alves <palves@redhat.com>
* common/gdb_socket.h: New file.
* ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
sys/socket.h.
(net_open): Use union gdb_sockaddr_u.
gdb/gdbserver/ChangeLog:
2015-03-09 Pedro Alves <palves@redhat.com>
Revert:
2015-03-07 Pedro Alves <palves@redhat.com>
* gdbreplay.c: No longer include <netinet/in.h>, <sys/socket.h>,
or <winsock2.h> here. Instead include "gdb_socket.h".
(remote_open): Use union gdb_sockaddr_u.
* remote-utils.c: No longer include <netinet/in.h>, <sys/socket.h>
or <winsock2.h> here. Instead include "gdb_socket.h".
(handle_accept_event, remote_prepare): Use union gdb_sockaddr_u.
* tracepoint.c: Include "gdb_socket.h" instead of <sys/socket.h>
or <sys/un.h>.
(init_named_socket, gdb_agent_helper_thread): Use union
gdb_sockaddr_u.
Building gdbserver in C++ mode shows:
gdb/gdbserver/tracepoint.c: In function ‘void* gdb_agent_helper_thread(void*)’:
gdb/gdbserver/tracepoint.c:7190:47: error: cannot convert ‘sockaddr_un*’ to ‘sockaddr*’ for argument ‘2’ to ‘int accept(int, sockaddr*, socklen_t*)’
fd = accept (listen_fd, &sockaddr, &tmp);
A few places in the tree already have an explicit cast to struct
sockaddr *, but that's a strict aliasing violation. Instead of
propagating invalid code, fix this by using a union instead.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* common/gdb_socket.h: New file.
* ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
sys/socket.h.
(net_open): Use union gdb_sockaddr_u.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* gdbreplay.c: No longer include <netinet/in.h>, <sys/socket.h>,
or <winsock2.h> here. Instead include "gdb_socket.h".
(remote_open): Use union gdb_sockaddr_u.
* remote-utils.c: No longer include <netinet/in.h>, <sys/socket.h>
or <winsock2.h> here. Instead include "gdb_socket.h".
(handle_accept_event, remote_prepare): Use union gdb_sockaddr_u.
* tracepoint.c: Include "gdb_socket.h" instead of <sys/socket.h>
or <sys/un.h>.
(init_named_socket, gdb_agent_helper_thread): Use union
gdb_sockaddr_u.
Although the current TRY/CATCH implementation works in C++ mode too,
it relies on setjmp/longjmp, and longjmp bypasses calling the
destructors of objects on the stack, which is obviously bad for C++.
This patch fixes this by makes TRY/CATCH use real try/catch in C++
mode behind the scenes. The way this is done allows RAII and cleanups
to coexist while we phase out cleanups, instead of requiring a flag
day.
This patch is not strictly necessary until we require a C++ compiler
and start actually using RAII, though I'm all for baby steps, and it
shows my proposed way forward. Putting it in now, allows for easier
experimentation and exposure of potential problems with real C++
exceptions.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c [!__cplusplus] (enum catcher_state)
(exceptions_state_mc_action_iter)
(exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
Don't define.
[__cplusplus] (try_scope_depth): New global.
[__cplusplus] (exception_try_scope_entry)
(exception_try_scope_exit, gdb_exception_sliced_copy)
(exception_rethrow): New functions.
(throw_exception): In C++ mode, throw
gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
(throw_it): In C++ mode, use try_scope_depth.
* common/common-exceptions.h [!__cplusplus]
(exceptions_state_mc_action_iter)
(exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
Don't declare.
[__cplusplus] (exception_try_scope_entry)
(exception_try_scope_exit, exception_rethrow): Declare.
[__cplusplus] (struct exception_try_scope): New struct.
[__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
C++ exceptions.
(struct gdb_exception_RETURN_MASK_ALL)
(struct gdb_exception_RETURN_MASK_ERROR)
(struct gdb_exception_RETURN_MASK_QUIT): New types.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
This commit introduces a new inline common function "startswith"
which takes two string arguments and returns nonzero if the first
string starts with the second. It also updates the 295 places
where this logic was written out longhand to use the new function.
gdb/ChangeLog:
* common/common-utils.h (startswith): New inline function.
All places where this logic was used updated to use the above.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* common/common-exceptions.h (exception_none): Declare.
* common/common-exceptions.c (exception_none): Moved from
exceptions.c.
(exceptions_state_mc_init): Use exception_none.
* exceptions.c (exception_none): Move to
common/common-exceptions.c.
* exceptions.h (exception_none): Move to
common/common-exceptions.h.
Functions and variables that are exported by the IPA DSO (that
GDBserver needs to look up) should have "C" mangling, thus be declared
with extern "C".
Function and variable declarations need the extern "C" marker, but
variable definitions can't be marked extern, so the patch splits
IP_AGENT_EXPORT into three.
Building in C++ mode revealed that a few variables were missing
IP_AGENT_EXPORT, thus the IPA has been broken when stripped, even in C
mode... So this ends being a bug fix as well.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* common/agent.h (IPA_SYM_EXPORTED_NAME): New.
(IPA_SYM): Use it.
* common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
gdb/gdbserver/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* linux-amd64-ipa.c (gdb_agent_get_raw_reg): Use
IP_AGENT_EXPORT_FUNC.
* linux-i386-ipa.c (gdb_agent_get_raw_reg): Use
IP_AGENT_EXPORT_FUNC.
* tracepoint.c (ATTR_USED, ATTR_NOINLINE, ATTR_CONSTRUCTOR)
(IP_AGENT_EXPORT): Delete.
(gdb_tp_heap_buffer, gdb_jump_pad_buffer, gdb_jump_pad_buffer_end)
(gdb_trampoline_buffer, gdb_trampoline_buffer_end)
(gdb_trampoline_buffer_error, collecting, gdb_collect)
(stop_tracing, flush_trace_buffer, about_to_request_buffer_space)
(trace_buffer_is_full, stopping_tracepoint, expr_eval_result)
(error_tracepoint, tracepoints, tracing, trace_buffer_ctrl)
(trace_buffer_ctrl_curr, trace_buffer_lo, trace_buffer_hi)
(traceframe_read_count, traceframe_write_count)
(traceframes_created, trace_state_variables, get_raw_reg)
(get_trace_state_variable_value, set_trace_state_variable_value)
(ust_loaded, helper_thread_id, cmd_buf): Use
IPA_SYM_EXPORTED_NAME.
(stop_tracing, flush_trace_buffer): Use IP_AGENT_EXPORT_FUNC.
(tracepoints) Use IP_AGENT_EXPORT_VAR.
(stopping_tracepoint, trace_buffer_is_full, expr_eval_result): Use
IP_AGENT_EXPORT_VAR and wrap in EXTERN_C_PUSH/EXTERN_C_POP.
(last_tracepoint): Move into !IN_PROCESS_AGENT block.
(error_tracepoint): Use IP_AGENT_EXPORT_VAR and wrap in
EXTERN_C_PUSH/EXTERN_C_POP.
(trace_state_variables): Use IP_AGENT_EXPORT_VAR.
(trace_buffer_lo, trace_buffer_hi): Use IP_AGENT_EXPORT_VAR and
wrap in EXTERN_C_PUSH/EXTERN_C_POP.
(trace_buffer_ctrl, trace_buffer_ctrl_curr)
(traceframe_write_count, traceframe_read_count)
(traceframes_created, tracing): Use IP_AGENT_EXPORT_VAR.
(about_to_request_buffer_space, get_trace_state_variable_value)
(set_trace_state_variable_value): Use IP_AGENT_EXPORT_FUNC.
(collecting): Use IP_AGENT_EXPORT_VAR and wrap in
EXTERN_C_PUSH/EXTERN_C_POP.
(gdb_collect): Use IP_AGENT_EXPORT_FUNC.
(ust_loaded, cmd_buf): Use IP_AGENT_EXPORT_VAR.
(helper_thread_id, gdb_agent_capability): Use IP_AGENT_EXPORT_VAR
and wrap in EXTERN_C_PUSH/EXTERN_C_POP.
(gdb_tp_heap_buffer, gdb_jump_pad_buffer, gdb_jump_pad_buffer_end)
(gdb_trampoline_buffer, gdb_trampoline_buffer_end)
(gdb_trampoline_buffer_error): Use IP_AGENT_EXPORT_VAR.
* tracepoint.h (ATTR_USED, ATTR_NOINLINE, EXPORTED_SYMBOL):
Define.
(IP_AGENT_EXPORT_FUNC, IP_AGENT_EXPORT_VAR)
(IP_AGENT_EXPORT_VAR_DECL): Define.
(tracing): Declare.
(gdb_agent_get_raw_reg): Declare.
These symbols are defined in C code, so in C++ mode we need to use
extern "C" to declare them. As extern "C" can't be used inside a
function's scope, we move the declarations to the global scope at the
same time.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* cli-out.c (_rl_erase_entire_line): Move declaration out of
cli_mld_erase_entire_line, and make it extern "C".
* common/common-defs.h (EXTERN_C): New.
* completer.c (_rl_completion_prefix_display_length)
(_rl_print_completions_horizontally, QSFUNC): Move declarations
out of gdb_display_match_list_1.
(_rl_qsort_string_compare): Move declaration out of
gdb_display_match_list_1, and make it extern "C".
* defs.h (re_comp): Use EXTERN_C.
* maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
and make it extern "C".
(monstartup): Move declaration out of maintenance_set_profile_cmd,
and make it extern "C".
(main): Move declaration out of maintenance_set_profile_cmd.
* nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
EXTERN_C.
This patch renames symbols that happen to have names which are
reserved keywords in C++.
Most of this was generated with Tromey's cxx-conversion.el script.
Some places where later hand massaged a bit, to fix formatting, etc.
And this was rebased several times meanwhile, along with re-running
the script, so re-running the script from scratch probably does not
result in the exact same output. I don't think that matters anyway.
gdb/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
gdb/gdbserver/
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
Rename symbols whose names are reserved C++ keywords throughout.
gdb/doc/agentexpr.texi documents the "setv" opcode as follow:
@item @code{setv} (0x2d) @var{n}: @result{} @var{v}
Set trace state variable number @var{n} to the value found on the top
of the stack. The stack is unchanged, so that the value is readily
available if the assignment is part of a larger expression. The
handling of @var{n} is as described for @code{getv}.
The @item line is incorrect (and does not match with its
description), so this patch fixes it.
Additionally, in gdb/common/ax.def we find the line:
DEFOP (setv, 2, 0, 0, 1, 0x2d)
From the comment earlier in the file:
Each line is of the form:
DEFOP (name, size, data_size, consumed, produced, opcode)
[...]
CONSUMED is the number of stack elements consumed.
PRODUCED is the number of stack elements produced.
which is saying that nothing is consumed and one item is produced.
Both should be 0 or both should be 1.
This patch sets them both to 1, which seems better since if nothing
is on the stack an error will occur.
gdb/ChangeLog:
* common/ax.def (setv): Fix consumed entry in setv DEFOP.
gdb/doc/ChangeLog:
* agentexpr.texi (Bytecode Descriptions): Fix summary line for setv.
Tested on x86_64-linux.
Add a struct for identifying a processor and use it in linux-btrace.c when
identifying the processor we're running on.
We will need this feature for the new btrace format.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
* nat/linux-btrace.c: (btrace_this_cpu): New.
(cpu_supports_bts): Call btrace_this_cpu.
(intel_supports_bts): Add cpu parameter.
Allow the size of the branch trace ring buffer to be defined by the
user. The specified buffer size will be used when BTS tracing is
enabled for new threads.
The obtained buffer size may differ from the requested size. The
actual buffer size for the current thread is shown in the "info record"
command.
Bigger buffers mean longer traces, but also longer processing time.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (parse_xml_btrace_conf_bts): Add size.
(btrace_conf_bts_attributes): New.
(btrace_conf_children): Add attributes.
* common/btrace-common.h (btrace_config_bts): New.
(btrace_config)<bts>: New.
(btrace_config): Update comment.
* nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
Use config.
* features/btrace-conf.dtd: Increment version. Add size
attribute to bts element.
* record-btrace.c (set_record_btrace_bts_cmdlist,
show_record_btrace_bts_cmdlist): New.
(record_btrace_adjust_size, record_btrace_print_bts_conf,
record_btrace_print_conf, cmd_set_record_btrace_bts,
cmd_show_record_btrace_bts): New.
(record_btrace_info): Call record_btrace_print_conf.
(_initialize_record_btrace): Add commands.
* remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
(remote_protocol_features): Add Qbtrace-conf:bts:size packet.
(btrace_sync_conf): Synchronize bts size.
(_initialize_remote): Add Qbtrace-conf:bts:size packet.
* NEWS: Announce new commands and new packets.
doc/
* gdb.texinfo (Branch Trace Configuration Format): Add size.
(Process Record and Replay): Describe new set|show commands.
(General Query Packets): Describe Qbtrace-conf:bts:size packet.
testsuite/
* gdb.btrace/buffer-size: New.
gdbserver/
* linux-low.c (linux_low_btrace_conf): Print size.
* server.c (handle_btrace_conf_general_set): New.
(hanle_general_set): Call handle_btrace_conf_general_set.
(handle_query): Report Qbtrace-conf:bts:size as supported.
Add a struct to describe the branch trace configuration and use it for
enabling branch tracing.
The user will be able to set configuration fields for each tracing format
to be used for new threads.
The actual configuration that is active for a given thread will be shown
in the "info record" command.
At the moment, the configuration struct only contains a format field
that is set to the only available format.
The format is the only configuration option that can not be set via set
commands. It is given as argument to the "record btrace" command when
starting recording.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (XMLFILES): Add btrace-conf.dtd.
* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
(x86_linux_btrace_conf): New.
(x86_linux_create_target): Initialize to_btrace_conf.
* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
Check format. Split into this and ...
(linux_enable_bts): ... this.
(linux_btrace_conf): New.
(perf_event_skip_record): Renamed into ...
(perf_event_skip_bts_record): ... this. Updated users.
(linux_disable_btrace): Split into this and ...
(linux_disable_bts): ... this.
(linux_read_btrace): Check format.
* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
(linux_btrace_conf): New.
(btrace_target_info)<ptid>: Moved.
(btrace_target_info)<conf>: New.
(btrace_target_info): Split into this and ...
(btrace_tinfo_bts): ... this. Updated users.
* btrace.c (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
(btrace_conf_children, btrace_conf_attributes)
(btrace_conf_elements): New.
* btrace.h (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf): New.
* common/btrace-common.h (btrace_config): New.
* feature/btrace-conf.dtd: New.
* record-btrace.c (record_btrace_conf): New.
(record_btrace_cmdlist): New.
(record_btrace_enable_warn, record_btrace_open): Pass
&record_btrace_conf.
(record_btrace_info): Print recording format.
(cmd_record_btrace_bts_start): New.
(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
(_initialize_record_btrace): Add "record btrace bts" subcommand.
Add "record bts" alias command.
* remote.c (remote_state)<btrace_config>: New.
(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
(remote_protocol_features): Add qXfer:btrace-conf:read.
(remote_open_1): Call remote_btrace_reset.
(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
(btrace_target_info)<conf>: New.
(btrace_sync_conf, btrace_read_config): New.
(remote_enable_btrace): Update parameters. Call btrace_sync_conf and
btrace_read_conf.
(remote_btrace_conf): New.
(init_remote_ops): Initialize to_btrace_conf.
(_initialize_remote): Add qXfer:btrace-conf packet.
* target.c (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
* target.h (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
(target_ops)<to_enable_btrace>: Update parameters and comment.
(target_ops)<to_btrace_conf>: New.
* target-delegates: Regenerate.
* target-debug.h (target_debug_print_const_struct_btrace_config_p)
(target_debug_print_const_struct_btrace_target_info_p): New.
NEWS: Announce new command and new packet.
doc/
* gdb.texinfo (Process Record and Replay): Describe the "record
btrace bts" command.
(General Query Packets): Describe qXfer:btrace-conf:read packet.
(Branch Trace Configuration Format): New.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Update parameters.
(linux_low_btrace_conf): New.
(linux_target_ops)<to_btrace_conf>: Initialize.
* server.c (current_btrace_conf): New.
(handle_btrace_enable): Rename to ...
(handle_btrace_enable_bts): ... this. Pass ¤t_btrace_conf
to target_enable_btrace. Update comment. Update users.
(handle_qxfer_btrace_conf): New.
(qxfer_packets): Add btrace-conf entry.
(handle_query): Report qXfer:btrace-conf:read as supported packet.
* target.h (target_ops)<enable_btrace>: Update parameters and comment.
(target_ops)<read_btrace_conf>: New.
(target_enable_btrace): Update parameters.
(target_read_btrace_conf): New.
testsuite/
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
Add a structure to hold the branch trace data and an enum to describe
the format of that data. So far, only BTS is supported. Also added
a NONE format to indicate that no branch trace data is available.
This will make it easier to support different branch trace formats in
the future.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (SFILES): Add common/btrace-common.c.
(COMMON_OBS): Add common/btrace-common.o.
(btrace-common.o): Add build rules.
* btrace.c (parse_xml_btrace): Update parameters.
(parse_xml_btrace_block): Set format field.
(btrace_add_pc, btrace_fetch): Use struct btrace_data.
(do_btrace_data_cleanup, make_cleanup_btrace_data): New.
(btrace_compute_ftrace): Split into this and...
(btrace_compute_ftrace_bts): ...this.
(btrace_stitch_trace): Split into this and...
(btrace_stitch_bts): ...this.
* btrace.h (parse_xml_btrace): Update parameters.
(make_cleanup_btrace_data): New.
* common/btrace-common.c: New.
* common/btrace-common.h: Include common-defs.h.
(btrace_block_s): Update comment.
(btrace_format): New.
(btrace_format_string): New.
(btrace_data_bts): New.
(btrace_data): New.
(btrace_data_init, btrace_data_fini, btrace_data_empty): New.
* remote.c (remote_read_btrace): Update parameters.
* target.c (target_read_btrace): Update parameters.
* target.h (target_read_btrace): Update parameters.
(target_ops)<to_read_btrace>: Update parameters.
* x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
* target-delegates.c: Regenerate.
* target-debug (target_debug_print_struct_btrace_data_p): New.
* nat/linux-btrace.c (linux_read_btrace): Split into this and...
(linux_read_bts): ...this.
* nat/linux-btrace.h (linux_read_btrace): Update parameters.
gdbserver/
* Makefile.in (SFILES): Add common/btrace-common.c.
(OBS): Add common/btrace-common.o.
(btrace-common.o): Add build rules.
* linux-low: Include btrace-common.h.
(linux_low_read_btrace): Use struct btrace_data. Call
btrace_data_init and btrace_data_fini.
This commit adds a new exception, MAX_COMPLETIONS_REACHED_ERROR, to be
thrown whenever the completer has generated too many candidates to
be useful. A new user-settable variable, "max_completions", is added
to control this behaviour. A top-level completion limit is added to
complete_line_internal, as the final check to ensure the user never
sees too many completions. An additional limit is added to
default_make_symbol_completion_list_break_on, to halt time-consuming
symbol table expansions.
gdb/ChangeLog:
PR cli/9007
PR cli/11920
PR cli/15548
* cli/cli-cmds.c (complete_command): Notify user if max-completions
reached.
* common/common-exceptions.h (enum errors)
<MAX_COMPLETIONS_REACHED_ERROR>: New value.
* completer.h (get_max_completions_reached_message): New declaration.
(max_completions): Likewise.
(completion_tracker_t): New typedef.
(new_completion_tracker): New declaration.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completion_enum): New enum.
(maybe_add_completion): New declaration.
(throw_max_completions_reached_error): Likewise.
* completer.c (max_completions): New global variable.
(new_completion_tracker): New function.
(free_completion_tracker): Likewise.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completions): Likewise.
(throw_max_completions_reached_error): Likewise.
(complete_line): Remove duplicates and limit result to max_completions
entries.
(get_max_completions_reached_message): New function.
(gdb_display_match_list): Handle max_completions.
(_initialize_completer): New declaration and function.
* symtab.c: Include completer.h.
(completion_tracker): New static variable.
(completion_list_add_name): Call maybe_add_completion.
(default_make_symbol_completion_list_break_on_1): Renamed from
default_make_symbol_completion_list_break_on. Maintain
completion_tracker across calls to completion_list_add_name.
(default_make_symbol_completion_list_break_on): New function.
* top.c (init_main): Set rl_completion_display_matches_hook.
* tui/tui-io.c: Include completer.h.
(tui_old_rl_display_matches_hook): New static global.
(tui_rl_display_match_list): Notify user if max-completions reached.
(tui_setup_io): Save/restore rl_completion_display_matches_hook.
* NEWS (New Options): Mention set/show max-completions.
gdb/doc/ChangeLog:
* gdb.texinfo (Command Completion): Document new
"set/show max-completions" option.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Disable completion limiting for
existing tests. Add new tests to check completion limiting.
* gdb.linespec/ls-errs.exp: Disable completion limiting.
This patch moves the shared code present on
gdb/linux-nat.c:linux_nat_create_inferior and
gdb/gdbserver/linux-low.c:linux_create_inferior to
nat/linux-personality.c. This code is responsible for disabling
address space randomization based on user setting, and using
<sys/personality.h> to do that. I decided to put the prototype of the
maybe_disable_address_space_randomization on nat/linux-osdata.h
because it seemed the best place to put it.
I regression-tested this patch on Fedora 20 x86_64, and found no
regressions.
gdb/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
(linux-personality.o): New rule.
* common/common-defs.h: Include <stdint.h>.
* config/aarch64/linux.mh (NATDEPFILES): Include
linux-personality.o.
* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
* config/arm/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* config/i386/linux.mh (NATDEPFILES): Likewise.
* config/ia64/linux.mh (NATDEPFILES): Likewise.
* config/m32r/linux.mh (NATDEPFILES): Likewise.
* config/m68k/linux.mh (NATDEPFILES): Likewise.
* config/mips/linux.mh (NATDEPFILES): Likewise.
* config/pa/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
* config/s390/linux.mh (NATDEPFILES): Likewise.
* config/sparc/linux64.mh (NATDEPFILES): Likewise.
* config/sparc/linux.mh (NATDEPFILES): Likewise.
* config/tilegx/linux.mh (NATDEPFILES): Likewise.
* config/xtensa/linux.mh (NATDEPFILES): Likewise.
* defs.h: Remove #include <stdint.h> (moved to
common/common-defs.h).
* linux-nat.c: Include nat/linux-personality.h. Remove #include
<sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
nat/linux-personality.c).
(linux_nat_create_inferior): Remove code to disable address space
randomization (moved to nat/linux-personality.c). Create cleanup
to disable address space randomization.
* nat/linux-personality.c: New file.
* nat/linux-personality.h: Likewise.
gdb/gdbserver/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add linux-personality.c.
(linux-personality.o): New rule.
* configure.srv (srv_linux_obj): Add linux-personality.o to the
list of objects to be built.
* linux-low.c: Include nat/linux-personality.h.
(linux_create_inferior): Remove code to disable address space
randomization (moved to ../nat/linux-personality.c). Create
cleanup to disable address space randomization.
This patch moves safe_strerror from the gdb/{posix,mingw}-hdep.c files
to the respective common/{posix,mingw}-strerror.c files. This is a
preparation for the next patch, which shares a common code (to disable
address space randomization when creating a new inferior).
The patch has been regtested on Fedora 20 x86_64, and no regressions
were found.
gdb/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
common/posix-strerror.c.
(posix-strerror.o): New rule.
(mingw-strerror.o): Likewise.
* common/common-utils.h (safe_strerror): Move prototype to here,
from utils.h.
* common/common.host: New file.
* common/mingw-strerror.c: Likewise.
* common/posix-strerror.c: Likewise.
* configure: Regenerated.
* configure.ac: Source common/common.host. Add variable
common_host_obs to gdb_host_obs.
* contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
gdb/common/posix-strerror.c when warning about the use of
strerror.
* mingw-hdep.c (safe_strerror): Remove definition; move it to
common/mingw-strerror.c.
* posix-hdep.c (safe_strerror): Remove definition; move it to
common/posix-hdep.c.
* utils.h (safe_strerror): Remove prototype; move to
common/common-utils.h.
gdb/gdbserver/ChangeLog
2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (posix-strerror.o): New rule.
(mingw-strerror.o): Likewise.
* configure: Regenerated.
* configure.ac: Source file ../common/common.host. Initialize new
variable srv_host_obs. Add srv_host_obs to GDBSERVER_DEPFILES.
The definition does not use the typedef for the dtor function pointer
type that the declaration uses. It's a cosmetic-only change.
ChangeLog:
* common/cleanups.c (make_cleanup_dtor): Use typedef for dtor
type.
Pedro Alves
Doug Evans
Yao Qi
Simon Marchi
Pierre Langlois
Markus Metzger
Jan Kratochvil
Gary Benson
David Taylor
Sergio Durigan Junior
Joel Brobecker