Nowadays, both aarch64 GDB and linux kernel assumes that address for
setting breakpoint should be 4-byte aligned. However that is not true
after we support multi-arch, because thumb instruction can be at 2-byte
aligned address. Patch http://lists.infradead.org/pipermail/linux-arm-kernel/2015-October/375141.html
to linux kernel is to teach kernel to handle 2-byte aligned address for
HW breakpoint, while this patch is to teach aarch64 GDB handle 2-byte
aligned address.
First of all, we call gdbarch_breakpoint_from_pc to get the instruction
length rather than using hard-coded 4. Secondly, in GDBserver, we set
length back to 2 if it is 3, because GDB encode 3 in it to indicate it
is a 32-bit thumb breakpoint. Then we relax the address alignment
check from 4-byte aligned to 2-byte aligned.
This patch enables some tests (such as gdb.base/break-idempotent.exp,
gdb.base/cond-eval-mode.exp, gdb.base/watchpoint-reuse-slot.exp,) and
fixes many fails (such as gdb.base/hbreak2.exp) when the program is
compiled in thumb mode on aarch64.
Regression tested on aarch64-linux, both native and gdbserver. This
is the last patch of multi-arch work.
gdb:
2015-10-15 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint):
Call gdbarch_breakpoint_from_pc to instruction length.
(aarch64_linux_remove_hw_breakpoint): Likewise.
* common/common-regcache.h (regcache_register_size): Declare.
* nat/aarch64-linux-hw-point.c: Include "common-regcache.h".
(aarch64_point_is_aligned): Set alignment to 2 for breakpoint if
the process is 32bit, otherwise set alignment to 4.
(aarch64_handle_breakpoint): Update comments.
* regcache.c (regcache_register_size): New function.
gdb/gdbserver:
2015-10-15 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_insert_point): Set len to 2
if it is 3.
(aarch64_remove_point): Likewise.
* regcache.c (regcache_register_size): New function.
There are a bunch of places where a void* is implicitely casted into a
gdb_byte*. The auto-insert-casts script added explicit casts at those
places. However, in many cases, it makes more sense to just change the
void* to a gdb_byte*.
gdb/ChangeLog:
* aarch64-tdep.c (stack_item_t): Change type of data to gdb_byte*.
* arm-tdep.c (struct stack_item): Likewise.
(push_stack_item): Add gdb_byte* cast.
* avr-tdep.c (struct stack_item): Change type of data to gdb_byte*.
(push_stack_item): Add gdb_byte* cast.
* cli/cli-dump.c (dump_memory_to_file): Change type of buf to gdb_byte*
and add cast.
* cris-tdep.c (struct stack_item): Change type of data to gdb_byte*.
(push_stack_item): Add gdb_byte* cast.
* gcore.c (gcore_copy_callback): Change type of memhunk to gdb_byte* and
add cast.
* gdbtypes.h (print_scalar_formatted): Change type of first parameter to
gdb_byte*.
* h8300-tdep.c (h8300_extract_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
(h8300h_extract_return_value): Likewise.
(h8300_store_return_value): Change type of valbuf to gdb_byte*.
(h8300h_store_return_value): Likewise.
* iq2000-tdep.c (iq2000_extract_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
* jit.c (jit_reader_try_read_symtab): Change type of gdb_mem to gdb_byte*
and add cast.
* m32r-tdep.c (m32r_store_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
(m32r_extract_return_value): Change type of dst to gdb_byte* and remove
valbuf.
* mep-tdep.c (mep_pseudo_cr32_read): Change type of buf to gdb_byte*.
(mep_pseudo_cr64_read): Likewise.
(mep_pseudo_csr_write): Likewise.
(mep_pseudo_cr32_write): Likewise.
(mep_pseudo_cr64_write): Likewise.
* mi/mi-main.c (mi_cmd_data_write_memory): Change type of buffer to
gdb_byte* and add cast.
* moxie-tdep.c (moxie_store_return_value): Change type of valbuf to
gdb_byte* and remove unnecessary cast.
(moxie_extract_return_value): Change type of dst to gdb_byte* and remove
valbuf.
* p-valprint.c (print_scalar_formatted): Change type of valaddr to
gdb_byte*.
* printcmd.c (void): Likewise.
* python/py-inferior.c (infpy_read_memory): Change type of buffer to
gdb_byte* and add cast.
(infpy_write_memory): Likewise.
(infpy_search_memory): Likewise.
* regcache.c (regcache_raw_write_signed): Change type of buf to gdb_byte*
and add cast.
(regcache_raw_write_unsigned): Likewise.
(regcache_cooked_write_signed): Likewise.
(regcache_cooked_write_unsigned): Likewise.
* sh64-tdep.c (h64_extract_return_value): Change type of valbuf to
gdb_byte*.
This patch is mostly extracted from Pedro's C++ branch. It adds explicit
casts from integer to enum types, where it is really the intention to do
so. This could be because we are ...
* iterating on enum values (we need to iterate on an equivalent integer)
* converting from a value read from bytes (dwarf attribute, agent
expression opcode) to the equivalent enum
* reading the equivalent integer value from another language (Python/Guile)
An exception to that is the casts in regcache.c. It seems to me like
struct regcache's register_status field could be a pointer to an array of
enum register_status. Doing so would waste a bit of memory (4 bytes
used by the enum vs 1 byte used by the current signed char, for each
register). If we switch to C++11 one day, we can define the underlying
type of an enum type, so we could have the best of both worlds.
gdb/ChangeLog:
* arm-tdep.c (set_fp_model_sfunc): Add cast from integer to enum.
(arm_set_abi): Likewise.
* ax-general.c (ax_print): Likewise.
* c-exp.y (exp : string_exp): Likewise.
* compile/compile-loc2c.c (compute_stack_depth_worker): Likewise.
(do_compile_dwarf_expr_to_c): Likewise.
* cp-name-parser.y (demangler_special : DEMANGLER_SPECIAL start):
Likewise.
* dwarf2expr.c (execute_stack_op): Likewise.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
(disassemble_dwarf_expression): Likewise.
* dwarf2read.c (dwarf2_add_member_fn): Likewise.
(read_array_order): Likewise.
(abbrev_table_read_table): Likewise.
(read_attribute_value): Likewise.
(skip_unknown_opcode): Likewise.
(dwarf_decode_macro_bytes): Likewise.
(dwarf_decode_macros): Likewise.
* eval.c (value_f90_subarray): Likewise.
* guile/scm-param.c (gdbscm_make_parameter): Likewise.
* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
* infrun.c (handle_command): Likewise.
* memory-map.c (memory_map_start_memory): Likewise.
* osabi.c (set_osabi): Likewise.
* parse.c (operator_length_standard): Likewise.
* ppc-linux-tdep.c (ppc_canonicalize_syscall): Likewise, and use
single return point.
* python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise.
* python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
(gdbpy_lookup_global_symbol): Likewise.
* record-full.c (record_full_restore): Likewise.
* regcache.c (regcache_register_status): Likewise.
(regcache_raw_read): Likewise.
(regcache_cooked_read): Likewise.
* rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
* symtab.c (initialize_ordinary_address_classes): Likewise.
* target-debug.h (target_debug_print_signals): Likewise.
* utils.c (do_restore_current_language): Likewise.
regcache_cpy_no_passthrough is no longer used for a standalone call.
gdb/ChangeLog
2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* regcache.c (regcache_cpy_no_passthrough): New declaration.
(regcache_cpy_no_passthrough): Make it static, add function comment.
* regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
(regcache_cpy_no_passthrough): Remove declaration.
This commit introduces a new inline common function "startswith"
which takes two string arguments and returns nonzero if the first
string starts with the second. It also updates the 295 places
where this logic was written out longhand to use the new function.
gdb/ChangeLog:
* common/common-utils.h (startswith): New inline function.
All places where this logic was used updated to use the above.
This introduces common-regcache.h. This contains two functions that
allow nat/linux-btrace.c to be simplified. A better long term
solution would be unify the regcache code, but this is sufficient for
now.
gdb/ChangeLog:
* common/common-regcache.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-regcache.h.
* regcache.h: Include common-regcache.h.
(regcache_read_pc): Don't declare.
* regcache.c (get_thread_regcache_for_ptid): New function.
* nat/linux-btrace.c: Don't include regcache.h.
Include common-regcache.h.
(perf_event_read_bts): Use get_thread_regcache_for_ptid.
gdb/gdbserver/ChangeLog:
* regcache.h: Include common-regcache.h.
(regcache_read_pc): Don't declare.
* regcache.c (get_thread_regcache_for_ptid): New function.
These functions are intended to suit all targets that don't require too
special logic in their regset supply/collect methods. Having such
generic functions helps reducing target-specific complexity.
As shown by the bug report, GDB crashes when the remote target was unable to
write to a register (the program counter) with the 'P' packet. This was reported
for AVR but can be reproduced on any architecture with a gdbserver that fails to
handle a 'P' packet.
Issue
=====
This GDB session was done with a custom gdbserver patched to send an error
packet when trying to set the program counter with a 'P' packet:
~~~
(gdb) file Debug/ATMega2560-simple-program.elf
Reading symbols from Debug/ATMega2560-simple-program.elf...done.
(gdb) target remote :51000
Remote debugging using :51000
0x00000000 in __vectors ()
(gdb) load
Loading section .text, size 0x1fc lma 0x0
Start address 0x0, load size 508
Transfer rate: 248 KB/sec, 169 bytes/write.
(gdb) b main
Breakpoint 1 at 0x164: file .././ATMega2560-simple-program.c, line 39.
(gdb) c
Continuing.
Program received signal SIGTRAP, Trace/breakpoint trap.
main () at .././ATMega2560-simple-program.c:42
42 DDRD |= LED0_MASK;// | LED1_MASK;
(gdb) info line 43
Line 43 of ".././ATMega2560-simple-program.c" is at address 0x178 <main+40> but contains no code.
(gdb) set $pc=0x178
Could not write register "PC2"; remote failure reply 'E00'
(gdb) info registers pc
pc 0x178 0x178 <main+40>
(gdb) s
../../unisrc-mainline/gdb/infrun.c:1978: internal-error: resume: Assertion `pc_in_thread_step_range (pc, tp)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
../../unisrc-mainline/gdb/infrun.c:1978: internal-error: resume: Assertion `pc_in_thread_step_range (pc, tp)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Create a core file of GDB? (y or n)
~~~
We can see that even though GDB reports that writing to the register failed, the
register cache was updated:
~~~
(gdb) set $pc=0x178
Could not write register "PC2"; remote failure reply 'E00'
(gdb) info registers pc
pc 0x178 0x178 <main+40>
~~~
The root of the problem is of course in the gdbserver but I thought GDB should
keep a register cache consistent with the hardware even in case of a failure.
Changes
=======
This patch adds routines to add a regcache_invalidate cleanup to the current
chain.
We can then register one before calling target_store_registers. This way if the
target throws an error, the register we wanted to write to will be invalidated
in cache. If target_store_registers succeeds, we can discard the new cleanup.
2014-06-12 Pierre Langlois <pierre.langlois@embecosm.com>
* regcache.c (struct register_to_invalidate): New structure.
(do_register_invalidate, make_cleanup_regcache_invalidate): New
functions.
(regcache_raw_write): Call make_cleanup_regcache_invalidate.
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" regcache.o 2>&1 1>/dev/null
../../src/gdb/regcache.c: In function ‘regcache_xmalloc_1’:
../../src/gdb/regcache.c:228:2: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
../../src/gdb/regcache.c:235:2: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
cc1: all warnings being treated as errors
regcache->register_status is "signed char".
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
for 'regcache->register_status'.
gdb_byte should be used for bytes from the program being debugged. We
have many places using char or unsigned char instead all over the
existing ports, and more ends up added over time due to copy/paste as
new code is based on old code.
I've greped the tree for "char buf[", and fixed all I found.
Tested by building with --enable-targets=all.
2013-03-01 Pedro Alves <palves@redhat.com>
Use gdb_byte for bytes from the program being debugged.
* arm-tdep.c (arm_store_return_value, arm_get_longjmp_target):
Change type of local 'buf' to gdb_byte.
* avr-tdep.c (avr_frame_prev_register, avr_push_dummy_call): Likewise.
* bfin-tdep.c (bfin_push_dummy_call): Likewise.
* cris-tdep.c (cris_sigcontext_addr)
(cris_sigtramp_frame_unwind_cache): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp)
(frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Likewise.
* frv-tdep.c (frv_pseudo_register_write, frv_analyze_prologue): Likewise.
* hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer)
(hppa32_hpux_search_dummy_call_sequence)
(hppa_hpux_supply_save_state): Likewise.
* hppa-linux-tdep.c (insns_match_pattern)
(hppa_linux_find_global_pointer): Likewise.
* hppa-tdep.c (hppa_in_function_epilogue_p)
(skip_prologue_hard_way, hppa_frame_cache): Likewise.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Likewise.
* i386fbsd-tdep.c (i386fbsd_supply_uthread)
(i386fbsd_collect_uthread): Likewise.
* ia64-hpux-tdep.c (ia64_hpux_push_dummy_code): Likewise.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Likewise.
* ia64-tdep.c (examine_prologue, ia64_frame_cache)
(ia64_frame_prev_register, ia64_sigtramp_frame_cache)
(ia64_sigtramp_frame_prev_register, ia64_access_reg)
(ia64_access_rse_reg, ia64_libunwind_frame_this_id)
(ia64_libunwind_frame_prev_register)
(ia64_libunwind_sigtramp_frame_this_id)
(ia64_find_global_pointer_from_dynamic_section)
(find_extant_func_descr, find_func_descr, ia64_dummy_id)
(ia64_unwind_pc): Likewise.
* iq2000-tdep.c (iq2000_store_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_push_dummy_call)
(m68hc11_extract_return_value): Likewise.
* m68klinux-nat.c (fetch_register, store_register): Likewise.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_cr32_write)
(mep_get_insn, mep_push_dummy_call): Likewise.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips_linux_in_dynsym_stub): Likewise.
* mn10300-tdep.c (mep_pseudo_cr32_write): Likewise.
* ppc-linux-nat.c (fetch_register, store_register): Likewise.
* regcache.c (dump_endian_bytes): Change type of parameter 'buf'
to gdb_byte.
* remote-mips.c (mips_set_register): Likewise.
* remote-sim.c (gdbsim_fetch_register): Likewise.
* score-tdep.c (score7_fetch_inst): Change type of parameter
'memblock' and local 'buf' to gdb_byte.
(score7_malloc_and_get_memblock): Change return type to gdb_byte.
Change type of local 'buf' to gdb_byte. Adjust.
(score7_adjust_memblock_ptr): Change type of parameter 'memblock'
to gdb_byte**.
(score7_analyze_prologue): Change type of 'memblock' and
'memblock_ptr' locals to gdb_byte*.
* sh64-tdep.c (sh64_extract_return_value)
(sh64_store_return_value): Change type of local 'buf' to gdb_byte.
* solib-darwin.c (darwin_current_sos, darwin_read_exec_load_addr):
* solib-pa64.c (pa64_solib_create_inferior_hook)
(pa64_open_symbol_file_object): Remove local 'buf'.
* solib-som.c (som_solib_create_inferior_hook, link_map_start)
(som_open_symbol_file_object): Likewise.
* solib-spu.c (spu_current_sos): Likewise.
* spu-linux-nat.c (spu_fetch_inferior_registers): Likewise.
* spu-multiarch.c (parse_spufs_run, spu_fetch_registers)
(spu_store_registers): Likewise.
* target.c (debug_print_register): Likewise.
* tic6x-tdep.c (tic6x_get_longjmp_target): Likewise.
* xstormy16-tdep.c (xstormy16_store_return_value)
(xstormy16_push_dummy_call, xstormy16_resolve_jmp_table_entry)
(xstormy16_find_jmp_table_entry): Likewise.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* infrun.c (displaced_step_fixup): Move some code ...
(displaced_step_restore): ... here. New function.
(handle_inferior_event): Cleanup displaced stepping state for both
child and parent when get forked or vforked event.
* regcache.c (get_thread_arch_aspace_regcache): New function.
get_thread_arch_regcache (): Call it.
gdb/
* regcache.c (get_thread_arch_regcache): If creating a regcache for
null_ptid, assume and allow a NULL address space, instead of
asking the target for the ptid's address space.
* infrun.c (ptid_is_pid): Remove assertion.
gdb/testsuite/
* gdb.base/maint.exp: Test that "maint print registers" works
without a running program.
* regcache.h (regcache_raw_read, regcache_raw_read_signed)
(regcache_raw_read_unsigned, regcache_raw_read_signed)
(regcache_raw_read_unsigned, regcache_raw_read_part)
(regcache_cooked_read, regcache_cooked_read_signed)
(regcache_cooked_read_unsigned, regcache_cooked_read_part)
(regcache_cooked_read_ftype): Change return to enum
register_status.
* regcache.c: Include exceptions.h
(regcache_save): Adjust to handle REG_UNAVAILABLE registers.
(do_cooked_read): Change return to enum register_status. Always
forward to regcache_cooked_read.
(regcache_raw_read): Change return to enum register_status. If
the register is not REG_VALID, memset the buffer. Return the
register's status.
(regcache_raw_read_signed): Handle non-REG_VALID registers and
return the register's status.
(regcache_raw_read_unsigned): Ditto.
(regcache_cooked_read): Change return to enum register_status.
Assert that with read-only regcaches, the register's status must
be known. If the regcache is read-only, and the register is not
REG_VALID, memset the buffer. Return the register's status.
(regcache_cooked_read_signed): Change return to enum
register_status. Handle non-REG_VALID registers and return the
register's status.
(regcache_cooked_read_unsigned): Change return to enum
register_status. Handle non-REG_VALID registers and return the
register's status.
(regcache_xfer_part, regcache_raw_read_part)
(regcache_cooked_read_part): Change return to enum
register_status. Return the register's status.
(regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is
unavailable.
(regcache_dump): Handle unavailable cooked registers.
* frame.c (do_frame_register_read): Adjust interface to match
regcache_cooked_read_ftype.
* gdbarch.sh (pseudo_register_read): Change return to enum
register_status.
* gdbarch.h, gdbarch.c: Regenerate.
* i386-tdep.h (i386_pseudo_register_read): Change return to enum
register_status.
* i386-tdep.c (i386_pseudo_register_read): Change return to enum
register_status. If reading a raw register indicates the raw
register is not valid, return the raw register's status,
otherwise, return REG_VALID.
* amd64-tdep.c (amd64_pseudo_register_read): Change return to enum
register_status. Handle non-REG_VALID raw registers and return
the register's status.
* arm-tdep.c (arm_neon_quad_read)
(arm_pseudo_read): Change return to enum register_status. Handle
non-REG_VALID raw registers and return the register's status.
* avr-tdep.c (avr_pseudo_register_read): Ditto.
* frv-tdep.c (frv_pseudo_register_read): Ditto.
* h8300-tdep.c (h8300_pseudo_register_read): Ditto.
* hppa-tdep.c (hppa_pseudo_register_read): Ditto.
* m32c-tdep.c (m32c_move_reg_t): Change return to enum
register_status.
(m32c_raw_read, m32c_raw_write, m32c_banked_read)
(m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read)
(m32c_part_write, m32c_cat_read, m32c_cat_write)
(m32c_r3r2r1r0_read, m32c_r3r2r1r0_write)
(m32c_pseudo_register_read): Change return to enum
register_status. Adjust.
* m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to
enum register_status. Return the register's status.
* mep-tdep.c (mep_pseudo_cr32_read): Change return to enum
register_status. Return the register's status.
(mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto.
* mips-tdep.c (mips_pseudo_register_read): Ditto.
* mt-tdep.c (mt_pseudo_register_read): Ditto.
* rs6000-tdep.c (move_ev_register_func): New typedef.
(e500_move_ev_register): Use it. Change return to enum
register_status. Return the register's status.
(do_regcache_raw_read): New function.
(do_regcache_raw_write): New function.
(e500_pseudo_register_read): Change return to enum
register_status. Return the register's status. Use
do_regcache_raw_read.
(e500_pseudo_register_write): Adjust. Use do_regcache_raw_write.
(dfp_pseudo_register_read): Change return to enum register_status.
Return the register's status.
(vsx_pseudo_register_read): Ditto.
(efpr_pseudo_register_read): Ditto.
(rs6000_pseudo_register_read): Ditto.
* s390-tdep.c (s390_pseudo_register_read): Change return to enum
register_status. Return the register's status.
* sh64-tdep.c (pseudo_register_read_portions): New function.
(sh64_pseudo_register_read): Change return to enum
register_status. Use pseudo_register_read_portions. Return the
register's status.
* ia64-tdep.c (ia64_pseudo_register_read): Change return to enum
register_status. Return the register's status.
* sh-tdep.c (pseudo_register_read_portions): New function.
(sh_pseudo_register_read): Change return to enum register_status.
Use pseudo_register_read_portions. Return the register's status.
* sparc-tdep.c (sparc32_pseudo_register_read): Change return to
enum register_status. Return the register's status.
* sparc64-tdep.c (sparc64_pseudo_register_read): Ditto.
* spu-tdep.c (spu_pseudo_register_read_spu)
(spu_pseudo_register_read): Ditto.
* xtensa-tdep.c (xtensa_register_read_masked)
(xtensa_pseudo_register_read): Ditto.
* bfin-tdep.c (bfin_pseudo_register_read): Ditto.
clear `current_regcache'. Only clear current_thread_ptid and
current_thread_arch when PTID matches. Only reinit the frame
cache if PTID matches the current inferior_ptid. Move alloca(0)
call to ...
(registers_changed): ... here.
(init_regcache_descr): Remove sizeof_raw_register_valid_p
overallocate hack.
(regcache_xmalloc): Rename to ...
(regcache_xmalloc_1): ... this. Add `readonly_p' parameter.
Allocate the regcache type accordingly.
(regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
(regcache_xfree): Asser the source is also readonly. Copy sizeof
cooked registers, not raw.
(regcache_dup_no_passthrough): Delete.
(get_thread_arch_regcache): Use regcache_xmalloc_1.
* h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
mention obsolete write_register_bytes.
* regcache.h (regcache_dup_no_passthrough): Delete declaration.
* record.c: White space.
* regcache.c: White space.
* reggroups.c: White space.
* remote-fileio.c: White space.
* remote-m32r-sdi.c: White space.
* remote-mips.c: White space.
* remote-sim.c: White space.
for the new regcache. All callers updated.
(regcache_cpy, regcache_cpy_no_passthrough): Do not set aspace here.
(get_thread_arch_regcache): Do not set aspace here.
* regcache.h (regcache_xmalloc): Update declaration.
* frame.c, infcall.c, ppc-linux-tdep.c: Calls to
regcache_xmalloc updated.
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
Yao Qi
Simon Marchi
Jan Kratochvil
Gary Benson
Joel Brobecker
Andreas Arnez
Pierre Langlois
Tom Tromey
Honggyu Kim
Andrew Burgess
Pedro Alves
Aleksandar Ristovski
Joel Brobecker
Ulrich Weigand
David S. Miller
Yao Qi
Michael Snyder
Daniel Jacobowitz