This adds displaced stepping support for the General-Instruction
Extension Facility instructions, which have a PC-relative displacement
(RIL-b/RIL-c). We already handle RIL branches, but not others.
Currently, displaced stepping a breakpoint put on any of these
instructions results in the inferior crashing when or after the
instruction is executed out-of-line in the scratch pad.
This patch takes the easy route of patching the displacement in the
copy of the instruction in the scratch pad. As the displacement is a
signed 32-bit field, it's possible that the stratch pad ends too far
that the needed displacement doesn't fit in the adjusted instruction,
as e.g., if stepping over a breakpoint in a shared library (the
scratch pad is around the main program's entry point). That case is
detected and GDB falls back to stepping over the breakpoint in-line
(which involves pausing all threads momentarily).
(We could probably do something smarter, but I don't plan on doing it
myself. This was already sufficient to get "maint set target-non-stop
on" working regression free on S/390.)
Tested on S/390 RHEL 7.1, where it fixes a few hundred FAILs when
testing with displaced stepping force-enabled, with the end result
being no regressions compared to a test run that doesn't force
displaced stepping. Fixes the non-stop tests compared to mainline
too; most are crashing due to this on the machine I run tests on.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* s390-linux-tdep.c (is_non_branch_ril)
(s390_displaced_step_copy_insn): New functions.
(s390_displaced_step_fixup): Update comment.
(s390_gdbarch_init): Install s390_displaced_step_copy_insn as
gdbarch_displaced_step_copy_insn hook.
At least on
gcc-4.4.7-11.el6.i686
./configure --enable-64-bit-bfd --enable-targets=all
GDB does not build due to:
cc1: warnings being treated as errors
s390-linux-tdep.c: In function ‘s390_handle_arg’:
s390-linux-tdep.c:2575: error: ‘val’ may be used uninitialized in this function
gdb/ChangeLog
2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix GCC false warning.
* s390-linux-tdep.c (s390_handle_arg): Initialize VAL.
linux_get_siginfo_type is installed to many linux gdbarch. This patch
is to move this to a common area linux-tdep.c:linux_init_abi, so that
linux_get_siginfo_type is installed to every linux gdbarch. If some
linux gdbarch needs its own version, please override it in
$ARCH_linux_init_abi. In the testsuite, we enable siginfo related
tests for all linux targets.
gdb:
2015-06-24 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
set_gdbarch_get_siginfo_type.
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
* linux-tdep.c (linux_get_siginfo_type): Change it to static.
(linux_init_abi): Call set_gdbarch_get_siginfo_type.
* linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
gdb/testsuite:
2015-06-24 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (supports_get_siginfo_type): Return 1 for all
linux targets.
We concluded that gdbarch_in_function_epilogue_p is misnamed, since it
returns true if the given PC is one instruction after the one that
destroyed the stack (which isn't necessarily inside an epilogue),
therefore it should be renamed to stack_frame_destroyed_p.
I also took the liberty of renaming the arch-specific implementations to
*_stack_frame_destroyed_p as well for consistency.
gdb:
2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
* amd64-tdep.c: Replace in_function_epilogue_p with
stack_frame_destroyed_p throughout.
* arch-utils.c: Ditto.
* arch-utils.h: Ditto.
* arm-tdep.c: Ditto.
* breakpoint.c: Ditto.
* gdbarch.sh: Ditto.
* hppa-tdep.c: Ditto.
* i386-tdep.c: Ditto.
* mips-tdep.c: Ditto.
* nios2-tdep.c: Ditto.
* rs6000-tdep.c: Ditto.
* s390-linux-tdep.c: Ditto.
* score-tdep.c: Ditto.
* sh-tdep.c: Ditto.
* sparc-tdep.c: Ditto.
* sparc-tdep.h: Ditto.
* sparc64-tdep.c: Ditto.
* spu-tdep.c: Ditto.
* tic6x-tdep.c: Ditto.
* tilegx-tdep.c: Ditto.
* xstormy16-tdep.c: Ditto.
* gdbarch.c, gdbarch.h: Re-generated.
With the S390 vector ABI, vector registers are used for passing vector
arguments and for returning a vector. Support this ABI in inferior
function calls and when setting or retrieving a function's return
value.
gdb/ChangeLog:
* s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
(enum s390_vector_abi_kind): New enum.
(struct gdbarch_tdep)<vector_abi>: New field.
(s390_effective_inner_type): Add parameter min_size. Stop
unwrapping if the inner type is smaller than min_size.
(s390_function_arg_float): Adjust call to
s390_effective_inner_type.
(s390_function_arg_vector): New function.
(s390_function_arg_integer): Adjust comment.
(struct s390_arg_state)<vr>: New field.
(s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
arguments according to vector ABI when appropriate.
(s390_push_dummy_call): Initialize the argument state's field
'vr'. Adjust calls to s390_handle_arg.
(s390_register_return_value): Handle vector return values.
(s390_return_value): Apply the "register" return value convention
to a vector when appropriate.
(s390_gdbarch_init): Initialize tdep->vector_abi.
* NEWS: Announce S390 vector ABI support.
Move related logic in the implementation of s390_return_value closer
together. This makes it easier to read and extend.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_return_value_convention): Remove
function. Inline its logic...
(s390_return_value): ...here. Instead, move the handling of the
"register" return value convention...
(s390_register_return_value): ...here. New function.
Simplify the structure of s390_push_dummy_call and its various helper
functions. This reduces the code and makes it easier to extend. The
new code should be functionally equivalent to the old one, except that
copies created by the caller are now always aligned on an 8-byte
boundary.
gdb/ChangeLog:
* s390-linux-tdep.c
(is_float_singleton): Remove function. Move the "singleton" part
of the logic...
(s390_effective_inner_type): ...here. New function.
(is_float_like): Remove function. Inline its logic...
(s390_function_arg_float): ...here.
(is_pointer_like, is_integer_like, is_struct_like): Remove
functions. Inline their logic...
(s390_function_arg_integer): ...here.
(s390_function_arg_pass_by_reference): Remove function.
(extend_simple_arg): Remove function.
(alignment_of): Remove function.
(struct s390_arg_state): New structure.
(s390_handle_arg): New function.
(s390_push_dummy_call): Move parameter placement logic to the new
function s390_handle_arg. Call it for calculating the stack area
sizes first, and again for actually writing the parameters.
This fixes a minor issue with the helper function is_power_of_two(),
which returned non-zero ("true") if the argument was zero. This led
to a wrong decision when passing a zero-sized struct in an inferior
function call.
gdb/ChangeLog:
* s390-linux-tdep.c (is_power_of_two): Add comment. Return
false if the argument is zero.
Running break-interp.exp with the target always in non-stop mode trips
on PR13858, as enabling non-stop also enables displaced stepping.
The problem is that when GDB doesn't know where the entry point is, it
doesn't know where to put the displaced stepping scratch pad. The
test added by this commit exercises this. Without the fix, we get:
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=on: break *$pc
set displaced-stepping on
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=on: set displaced-stepping on
stepi
0x00000000004005be in ?? ()
Entry point address is not known.
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=on: stepi
p /x $pc
$2 = 0x4005be
(gdb) PASS: gdb.base/step-over-no-symbols.exp: displaced=on: get after PC
FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
The fix switches all GNU/Linux ports to get the entry point from
AT_ENTRY in the target auxiliary vector instead of from symbols. This
is currently only done by PPC when Cell debugging is enabled, but I
think all archs should be able to do the same. Note that
ppc_linux_displaced_step_location cached the result, I'm guessing to
avoid constantly re-fetching the auxv out of remote targets, but
that's no longer necessary nowadays, as the auxv blob is itself cached
in the inferior object. The ppc_linux_entry_point_addr global is
obviously bad for multi-process too nowadays.
Tested on x86-64 (-m64/-m32), PPC64 (-m64/-m32) and S/390 GNU/Linux.
Yao tested the new test on ARM as well.
gdb/ChangeLog:
2015-04-10 Pedro Alves <palves@redhat.com>
PR gdb/13858
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
linux_displaced_step_location as gdbarch_displaced_step_location
hook.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* linux-tdep.c (linux_displaced_step_location): New function,
based on ppc_linux_displaced_step_location.
* linux-tdep.h (linux_displaced_step_location): New declaration.
* ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
(ppc_linux_inferior_created, ppc_linux_displaced_step_location):
Delete.
(ppc_linux_init_abi): Install linux_displaced_step_location as
gdbarch_displaced_step_location hook, even without Cell/B.E..
(_initialize_ppc_linux_tdep): Don't install
ppc_linux_inferior_created as inferior_created observer.
* s390-linux-tdep.c (s390_gdbarch_init): Install
linux_displaced_step_location as gdbarch_displaced_step_location
hook.
gdb/testsuite/
2015-04-10 Pedro Alves <palves@redhat.com>
PR gdb/13858
* gdb.base/step-over-no-symbols.exp: New file.
Instead of analyzing the prologue and possibly coming to a wrong
conclusion, this change tries to skip the prologue with the use of
skip_prologue_using_sal. Only if that fails, the prologue analyzer is
invoked as before.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
SAL, if possible.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
This normalizes some exception catch blocks that check for ex.reason
to look like this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ALL)
{
...
}
if (ex.reason < 0)
{
...
}
~~~
This is a preparation step for running a script that converts all
TRY_CATCH uses to look like this instead:
~~~
TRY
{
...
}
CATCH (ex, RETURN_MASK_ALL)
{
...
}
END_CATCH
~~~
The motivation for that change is being able to reimplent TRY/CATCH in
terms of C++ try/catch.
This commit makes it so that:
- no condition other than ex.reason < 0 is checked in the if
predicate
- there's no "else" block to check whether no exception was caught
- there's no code between the TRY_CATCH (TRY) block and the
'if (ex.reason < 0)' block (CATCH).
- the exception object is no longer referred to outside the if/catch
block. Note the local volatile exception objects that are
currently defined inside functions that use TRY_CATCH will
disappear. In cases it's more convenient to still refer to the
exception outside the catch block, a new non-volatile local is
added and copy to that object is made within the catch block.
The following patches should make this all clearer.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
(amd64_epilogue_frame_cache): Normal exception handling code.
* break-catch-throw.c (check_status_exception_catchpoint)
(re_set_exception_catchpoint): Ditto.
* cli/cli-interp.c (safe_execute_command):
* cli/cli-script.c (script_from_file): Ditto.
* compile/compile-c-symbols.c (generate_c_for_for_one_variable):
Ditto.
* compile/compile-object-run.c (compile_object_run): Ditto.
* cp-abi.c (baseclass_offset): Ditto.
* cp-valprint.c (cp_print_value): Ditto.
* exceptions.c (catch_exceptions_with_msg):
* frame-unwind.c (frame_unwind_try_unwinder): Ditto.
* frame.c (get_frame_address_in_block_if_available): Ditto.
* i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
(i386_sigtramp_frame_cache): Ditto.
* infcmd.c (post_create_inferior): Ditto.
* linespec.c (parse_linespec, find_linespec_symbols):
* p-valprint.c (pascal_object_print_value): Ditto.
* parse.c (parse_expression_for_completion): Ditto.
* python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
* remote.c (remote_get_noisy_reply): Ditto.
* s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
* solib-svr4.c (solib_svr4_r_map): Ditto.
When adding vector register support to GDB, s390_register_name() was
added to suppress the right halves of the first 16 vector registers.
However, that function returned NULL instead of an empty string in such
a case. This leads to an incomplete list of registers returned by
"complete info registers ", because completion stops at the first NULL
return value from user_reg_map_regnum_to_name().
gdb/ChangeLog:
* s390-linux-tdep.c (s390_register_name): Return empty string
instead of NULL for registers that shouldn't be visible.
This patch fixes a typo that caused the wrong syscall XML file to be
used for s390x targets.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
XML file for 64-bit targets.
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
In C, an enum or structure defined inside other structure has global
scope just like it had been defined outside the struct in the first
place. However, in C++, such a nested structure is given a name that
is nested inside the structure. This patch moves such affected
structures/enums out to global scope, so that code using them works
the same in C++ as it works today in C.
gdb/ChangeLog:
2015-02-27 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
* dwarf2-frame.c (enum cfa_how_kind, struct
dwarf2_frame_state_reg_info): Move out of struct
dwarf2_frame_state.
* dwarf2read.c (struct tu_stats): Move out of struct
dwarf2_per_objfile.
(struct file_entry): Move out of struct line_header.
(struct nextfield, struct nextfnfield, struct fnfieldlist, struct
typedef_field_list): Move out of struct field_info.
* gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
Move out of struct dynamic_prop.
(union type_owner, union field_location, struct field, struct
range_bounds, union type_specific): Move out of struct main_type.
(struct fn_fieldlist, struct fn_field, struct typedef_field)
(VOFFSET_STATIC): Move out of struct cplus_struct_type.
(struct call_site_target, union call_site_parameter_u, struct
call_site_parameter): Move out of struct call_site.
* m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
m32c_prologue.
(enum srcdest_kind): Move out of struct srcdest.
* main.c (enum cmdarg_kind): Move out of struct cmdarg.
* prologue-value.h (enum prologue_value_kind): Move out of struct
prologue_value.
* s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
gdbarch_tdep.
* stabsread.c (struct nextfield, struct next_fnfieldlist): Move
out of struct field_info.
* symfile.h (struct other_sections): Move out of struct
section_addr_info.
* symtab.c (struct symbol_cache_slot): Move out struct
block_symbol_cache.
* target-descriptions.c (enum tdesc_type_kind): Move out of
typedef struct tdesc_type.
* tui/tui-data.h (enum tui_line_or_address_kind): Move out of
struct tui_line_or_address.
* value.c (enum internalvar_kind, union internalvar_data): Move
out of struct internalvar.
* xtensa-tdep.h (struct ctype_cache): Move out of struct
gdbarch_tdep.
On 64-bit S390 platforms the "compile" command always failed because
gcc was not invoked correctly. This patch fixes the compiler
invocation.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_gcc_target_options): Not just handle
31-bit targets, but 64-bit targets as well.
(s390_gnu_triplet_regexp): New function.
(s390_gdbarch_init): Set the gcc_target_options gdbarch method for
64-bit targets as well. Set the gnu_triplet_regexp gdbarch
method.
This adds s390_gcc_target_options, an implementation of the new
"gcc_target_options" gdbarch method. This was needed because the
default implementation of the method doesn't work properly for S390,
as this architecture needs "-m31" rather than "-m32".
gdb/ChangeLog
2014-12-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* s390-linux-tdep.c (s390_gcc_target_options): New function.
(s390_gdbarch_init): Add it to gdbarch.
This patch intends to partially fix PR breakpoints/10737, which is
about making the syscall information (for the "catch syscall" command)
be per-arch, instead of global. This is not a full fix because of the
other issues pointed by Pedro here:
<https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5>
However, I consider it a good step towards the real fix. It will also
help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>.
What this patch does, basically, is move the "syscalls_info"
struct to gdbarch. Currently, the syscall information is stored in a
global variable inside gdb/xml-syscall.c, which means that there is no
easy way to correlate this info with the current target or
architecture being used, for example. This causes strange behaviors,
because the syscall info is not re-read when the arch changes. For
example, if you put a syscall catchpoint in syscall 5 on i386 (syscall
open), and then load a x86_64 program on GDB and put the same syscall
5 there (fstat on x86_64), you will still see that GDB tells you that
it is catching "open", even though it is not. With this patch, GDB
correctly says that it will be catching fstat syscalls.
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'open' [5])
But with the patch:
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'fstat' [5])
As I said, there are still some problems on the "catch syscall"
mechanism, because (for example) the user should be able to "catch
syscall open" on i386, and then expect "open" to be caught also on
x86_64. Currently, it doesn't work. I intend to work on this later.
gdb/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* bfin-linux-tdep.c (bfin_linux_init_abi): Likewise.
* breakpoint.c (print_it_catch_syscall): Adjust call to
get_syscall_by_number to provide gdbarch.
(print_one_catch_syscall): Likewise.
(print_mention_catch_syscall): Likewise.
(print_recreate_catch_syscall): Likewise.
(catch_syscall_split_args): Adjust calls to get_syscall_by_number
and get_syscall_by_name to provide gdbarch.
(catch_syscall_completer): Adjust call to get_syscall_names to
provide gdbarch.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* gdbarch.sh: Forward declare "struct syscalls_info".
(xml_syscall_file): New variable.
(syscalls_info): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise.
* xml-syscall.c: Include gdbarch.h.
(set_xml_syscall_file_name): Accept gdbarch parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
(my_gdb_datadir): Delete global variable.
(struct syscalls_info) <my_gdb_datadir>: New variable.
(struct syscalls_info) <sysinfo>: Rename variable to
"syscalls_info".
(sysinfo): Delete global variable.
(have_initialized_sysinfo): Likewise.
(xml_syscall_file): Likewise.
(sysinfo_free_syscalls_desc): Rename to...
(syscalls_info_free_syscalls_desc): ... this.
(free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust
code to the new layout of "struct syscalls_info".
(make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to
"syscalls_info".
(syscall_create_syscall_desc): Likewise.
(syscall_start_syscall): Likewise.
(syscall_parse_xml): Likewise.
(xml_init_syscalls_info): Likewise. Drop "const" from return value.
(init_sysinfo): Rename to...
(init_syscalls_info): ...this. Add gdbarch as a parameter.
Adjust function to deal with gdbarch.
(xml_get_syscall_number): Delete parameter sysinfo. Accept
gdbarch as a parameter. Adjust code.
(xml_get_syscall_name): Likewise.
(xml_list_of_syscalls): Likewise.
(set_xml_syscall_file_name): Accept gdbarch as parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
* xml-syscall.h (set_xml_syscall_file_name): Likewise.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
gdb/testsuite/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* gdb.base/catch-syscall.exp (do_syscall_tests): Call
test_catch_syscall_multi_arch.
(test_catch_syscall_multi_arch): New function.
This adds the 'regset' parameter to the iterator callback.
Consequently the 'regset_from_core_section' method is dropped for all
targets that provide the iterator method.
This change prepares for replacing regset_from_core_section
everywhere, thereby eliminating one gdbarch interface. Since the
iterator is usually no more complex than regset_from_core_section
alone, targets that previously didn't define core_regset_sections will
then gain multi-arch capable core file generation support without
increased complexity.
gdb/ChangeLog:
* gdbarch.sh (iterate_over_regset_sections_cb): Add regset
parameter.
* gdbarch.h: Regenerate.
* corelow.c (sniff_core_bfd): Don't sniff if gdbarch has a regset
iterator.
(get_core_register_section): Add parameter 'regset' and use it, if
set. Add parameter 'min_size' and verify the bfd section size
against it.
(get_core_registers_cb): Add parameter 'regset' and pass it to
get_core_register section. For the "standard" register sections
".reg" and ".reg2", set an appropriate default for human_name.
(get_core_registers): Don't abort when the gdbarch has an iterator
but no regset_from_core_section. Add NULL/0 for parameters
'regset'/'min_size' in calls to get_core_register_section.
* linux-tdep.c (linux_collect_regset_section_cb): Add parameter
'regset' and use it instead of calling the
regset_from_core_section gdbarch method.
* i386-tdep.h (struct gdbarch_tdep): Add field 'fpregset'.
* i386-tdep.c (i386_supply_xstateregset)
(i386_collect_xstateregset, i386_xstateregset): Moved to
i386-linux-tdep.c.
(i386_regset_from_core_section): Drop handling for .reg-xfp and
.reg-xstate.
(i386_gdbarch_init): Set tdep field 'fpregset'. Enable generic
core file support only if the regset iterator hasn't been set.
* i386-linux-tdep.c (i386_linux_supply_xstateregset)
(i386_linux_collect_xstateregset, i386_linux_xstateregset): New.
Moved from i386-tdep.c and renamed to *_linux*.
(i386_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation. Allow any .reg-xstate size when reading
from a core file.
* amd64-tdep.c (amd64_supply_xstateregset)
(amd64_collect_xstateregset, amd64_xstateregset): Moved to
amd64-linux-tdep.c.
(amd64_regset_from_core_section): Remove.
(amd64_init_abi): Set new tdep field 'fpregset'. No longer
install an amd64-specific regset_from_core_section gdbarch method.
* amd64-linux-tdep.c (amd64_linux_supply_xstateregset)
(amd64_linux_collect_xstateregset, amd64_linux_xstateregset): New.
Moved from amd64-tdep.c and renamed to *_linux*.
(amd64_linux_iterate_over_regset_sections): Add regset parameter
to each callback invocation. Allow any .reg-xstate size when
reading from a core file.
* arm-linux-tdep.c (arm_linux_regset_from_core_section): Remove.
(arm_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation.
(arm_linux_init_abi): No longer set the regset_from_core_section
gdbarch method.
* ppc-linux-tdep.c (ppc_linux_regset_from_core_section): Remove.
(ppc_linux_iterate_over_regset_sections): Add regset parameter to
each callback invocation.
(ppc_linux_init_abi): No longer set the regset_from_core_section
gdbarch method.
* s390-linux-tdep.c (struct gdbarch_tdep): Remove the fields
gregset, sizeof_gregset, fpregset, and sizeof_fpregset.
(s390_regset_from_core_section): Remove.
(s390_iterate_over_regset_sections): Add regset parameter to each
callback invocation.
(s390_gdbarch_init): No longer set the regset_from_core_section
gdbarch method. Drop initialization of deleted tdep fields.
The core_regset_sections list in gdbarch (needed for multi-arch
capable core file generation support) is replaced by an iterator
method. Overall, this reduces the code a bit, and it allows for more
flexibility.
gdb/ChangeLog:
* amd64-linux-tdep.c (amd64_linux_regset_sections): Remove.
(amd64_linux_iterate_over_regset_sections): New.
(amd64_linux_init_abi_common): Don't install the regset section
list, but the new iterator in gdbarch.
* arm-linux-tdep.c (arm_linux_fpa_regset_sections)
(arm_linux_vfp_regset_sections): Remove. Move combined logic...
(arm_linux_iterate_over_regset_sections): ...here. New function.
(arm_linux_init_abi): Set iterator instead of section list.
* corelow.c (get_core_registers_cb): New function, logic moved
from...
(get_core_registers): ...loop body here. Use new iterator method
instead of walking through the regset section list.
* gdbarch.sh: Remove 'core_regset_sections'. New method
'iterate_over_regset_sections'. New typedef
'iterate_over_regset_sections_cb'.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* i386-linux-tdep.c (i386_linux_regset_sections)
(i386_linux_sse_regset_sections, i386_linux_avx_regset_sections):
Remove.
(i386_linux_iterate_over_regset_sections): New.
(i386_linux_init_abi): Don't choose a regset section list, but
install new iterator in gdbarch.
* linux-tdep.c (struct linux_collect_regset_section_cb_data): New.
(linux_collect_regset_section_cb): New function, logic moved
from...
(linux_collect_thread_registers): ...loop body here. Use iterator
method instead of walking through list.
(linux_make_corefile_notes_1): Check for presence of iterator
method instead of regset section list.
* ppc-linux-tdep.c (ppc_linux_vsx_regset_sections)
(ppc_linux_vmx_regset_sections, ppc_linux_fp_regset_sections)
(ppc64_linux_vsx_regset_sections, ppc64_linux_vmx_regset_sections)
(ppc64_linux_fp_regset_sections): Remove. Move combined logic...
(ppc_linux_iterate_over_regset_sections): ...here. New function.
(ppc_linux_init_abi): Don't choose from above regset section
lists, but install new iterator in gdbarch.
* regset.h (struct core_regset_section): Remove.
* s390-linux-tdep.c (struct gdbarch_tdep): Add new fields
have_linux_v1, have_linux_v2, and have_tdb.
(s390_linux32_regset_sections, s390_linux32v1_regset_sections)
(s390_linux32v2_regset_sections, s390_linux64_regset_sections)
(s390_linux64v1_regset_sections, s390_linux64v2_regset_sections)
(s390x_linux64_regset_sections, s390x_linux64v1_regset_sections)
(s390x_linux64v2_regset_sections): Remove. Move combined logic...
(s390_iterate_over_regset_sections): ...here. New function. Use
new tdep fields.
(s390_gdbarch_init): Set new tdep fields. Don't choose from above
regset section lists, but install new iterator.
Rather than supplying own supply/collect functions, use the generic
functions regcache_supply_regset and regcache_collect_regset instead.
The register maps are rewritten accordingly and become much shorter
(and better readable) than before.
The regset structure's 'descr' field is intended to represent some
kind of "register map". Thus, before making more use of it, this
change renames it to 'regmap' and adjusts the comment appropriately.
(See: https://sourceware.org/ml/gdb-patches/2014-05/msg00664.html)
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
This patch fixes a problem that prevented use of the Dwarf unwinders on SPU,
because dwarf2-frame.c common code did not support the situation where the
stack and/or frame pointer is maintained in a *vector* register. This is
because read_addr_from_reg is hard-coded to assume that such pointers can
be read from registers via a simple get_frame_register / unpack_pointer
operation.
Now, there *is* a routine address_from_register that calls into the
appropriate tdep routines to handle pointer values in "weird" registers
like on SPU, but it turns out I cannot simply change dwarf2-frame.c to
use address_from_register. This is because address_from_register uses
value_from_register to create a (temporary) value, and that routine
at some point calls get_frame_id in order to set up that value's
VALUE_FRAME_ID entry.
However, the dwarf2-frame.c read_addr_from_reg routine will be called
during early unwinding (to unwind the frame's CFA), at which point the
frame's ID is not actually known yet! This would cause an assert.
On the other hand, we may notice that VALUE_FRAME_ID is only needed in the
value returned by value_from_register if that value is later used as an
lvalue. But this is obviously never done to the temporary value used in
address_from_register. So, if we could change address_from_register to
not call value_from_register but instead accept constructing a value
that doesn't have VALUE_FRAME_ID set, things should be fine.
To do that, we can change the value_from_register callback to accept
a FRAME_ID instead of a FRAME; the only existing uses of the FRAME
argument were either to extract its frame ID, or its gdbarch. (To
keep a way of getting at the latter, we also change the callback's
type from "f" to "m".) Together with the required follow-on changes
in the existing value_from_register implementations (including the
default one), this seems to fix the problem.
As another minor interface cleanup, I've removed the explicit TYPE
argument from address_from_register. This routine really always
uses a default pointer type, and in the new implementation it -to
some extent- relies on that fact, in that it will now no longer
handle types that require gdbarch_convert_register_p handling.
gdb:
2014-04-17 Ulrich Weigand <uweigand@de.ibm.com>
* gdbarch.sh (value_from_register): Make class "m" instead of "f".
Replace FRAME argument with FRAME_ID.
* gdbarch.c, gdbarch.h: Regenerate.
* findvar.c (default_value_from_register): Add GDBARCH argument;
replace FRAME by FRAME_ID. No longer call get_frame_id.
(value_from_register): Update call to gdbarch_value_from_register.
* value.h (default_value_from_register): Update prototype.
* s390-linux-tdep.c (s390_value_from_register): Update interface
and call to default_value_from_register.
* spu-tdep.c (spu_value_from_register): Likewise.
* findvar.c (address_from_register): Remove TYPE argument.
Do not call value_from_register; use gdbarch_value_from_register
with null_frame_id instead.
* value.h (address_from_register): Update prototype.
* dwarf2-frame.c (read_addr_from_reg): Use address_from_register.
* dwarf2loc.c (dwarf_expr_read_addr_from_reg): Update for
address_from_register interface change.
* syscalls/s390x-linux.xml: New file.
* syscalls/s390-linux.xml: New file.
* s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
(XML_SYSCALL_FILENAME_S390X): Likewise.
(op_svc): New enum value for SVC opcode.
(s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
(s390_linux_get_syscall_number): New function.
(s390_gdbarch_init): Register '*get_syscall_number' and the
syscall xml file name.
* data-directory/Makefile.in (SYSCALLS_FILES): Add
"s390-linux.xml" and "s390x-linux.xml".
* NEWS: Announce new feature.
gdb/testsuite/ChangeLog:
* gdb.base/catch-syscall.exp: Activate test on s390*-linux.
The test fails on s390 with:
-trace-find frame-number 0^M
&"PC not available\n"^M
^done,found="1",tracepoint="1",traceframe="0",frame={level="-1",addr="<unavailable>",func="??",args=[]}^M
(gdb) ^M
FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: -trace-find frame-number 0
tfile knows to infer the PC from the tracepoint's address if the PC
wasn't collected (tfile_fetch_registers) but, that only works on
targets whose PC register is a raw register, and on s390, the PC
register is a pseudo register.
But even if GDB doesn't know how to infer the value of PC, saying the
current frame is level -1 is a bug:
^done,found="1",tracepoint="1",traceframe="0",frame={level="-1",addr="<unavailable>",func="??",args=[]}^M
^^^^^^^^^
'-1' is the level of the sentinel frame, which should never be visible.
This is caused by the s390's heuristic unwinder accepting the frame
(the fallback heuristic unwinders _always_ accept the frame), but then
the unwind->this_id method throws that "PC not available\n" error.
IOW, the s390's heuristic unwinder was never adjusted to handle
unavailable register values gracefully, which can happen with e.g., a
trimmed core file too.
This is just the minimal necessary for
<unavailable> frames, which at least gets us:
(gdb) tfind
Found trace frame 0, tracepoint 1
#0 <unavailable> in ?? ()
That is, frame #0 instead of -1.
We could get better info out of "info frame" (this patch makes us show
"outermost"), but this change would still be necessary.
gdb/
2014-01-16 Pedro Alves <palves@redhat.com>
* s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
the backchain.
This removes XCALLOC and replaces it either with XCNEWVEC, or, if the
number of elements being requested was 1, with XCNEW.
2014-01-13 Tom Tromey <tromey@redhat.com>
* defs.h (XCALLOC): Remove.
* bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
(print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
* dwarf2loc.c (allocate_piece_closure): Likewise.
* elfread.c (elf_symfile_segments): Likewise.
(elf_symfile_segments): Likewise.
* gdbtypes.c (copy_type_recursive): Likewise.
* i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
* jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
* minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
XCALLOC.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
XCALLOC.
* psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
* regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
* registry.c (registry_alloc_data): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* serial.c (serial_fdopen_ops): Likewise.
* solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
XCALLOC.
* spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
* symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
not XCALLOC.
This patch extends the current generic parser for SystemTap SDT probe
arguments. It can be almost considered a cleanup, but the main point of
it is actually to allow the generic parser to accept multiple prefixes
and suffixes for the its operands (i.e., integers, register names, and
register indirection).
I have chosen to implement this as a list of const strings, and declare
this list as "static" inside each target's method used to initialize
gdbarch.
This patch is actually a preparation for an upcoming patch for ARM,
which implements the support for multiple integer prefixes (as defined
by ARM's asm spec). And AArch64 will also need this, for the same
reason.
This patch was regtested on all architectures that it touches (i.e.,
i386, x86_64, ARM, PPC/PPC64, s390x and IA-64). No regressions were found.
2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com>
* amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe
argument prefixes and suffixes. Initialize gdbarch with them.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (stap_integer_prefix, stap_integer_suffix)
(stap_register_prefix, stap_register_suffix)
(stap_register_indirection_prefix)
(stap_register_indirection_suffix): Declare as "const char *const
*" instead of "const char *". Adjust printing function. Rename
all of the variables to the plural.
(pstring_list): New function.
* i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe
argument prefixes and suffixes. Initialize gdbarch with them.
* ia64-linux-tdep.c (ia64_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* stap-probe.c (stap_is_generic_prefix): New function.
(stap_is_register_prefix): Likewise.
(stap_is_register_indirection_prefix): Likewise.
(stap_is_integer_prefix): Likewise.
(stap_generic_check_suffix): Likewise.
(stap_check_integer_suffix): Likewise.
(stap_check_register_suffix): Likewise.
(stap_check_register_indirection_suffix): Likewise.
(stap_parse_register_operand): Remove unecessary declarations for
variables holding prefix and suffix information. Use the new
functions listed above for checking for prefixes and suffixes.
(stap_parse_single_operand): Likewise.
As suggested before, rename the S/390-related source files (tdep and nat)
such that "-linux-" occurs in the file name, like with other GNU/Linux
targets. Since no other operating system is currently supported by GDB
on this architecture, this isn't strictly necessary. But the old names
sometimes caused GDB contributors to miss these files when performing a
change that affects all GNU/Linux targets. The latest such incident was
observed here:
https://sourceware.org/ml/gdb-patches/2013-09/msg00619.html
gdb/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-tdep.h: Rename to...
* s390-linux-tdep.h: ...here.
* s390-tdep.c: Rename to...
* s390-linux-tdep.c: ...here. Adjust #include.
* s390-nat.c: Rename to...
* s390-linux-nat.c: ...here. Adjust #include.
* config/s390/s390.mh: Rename to...
* config/s390/linux.mh: ...here. Reflect rename s390-nat.o ->
s390-linux-nat.o.
* configure.host: Reflect host rename "s390" -> "linux".
* configure.tgt: Reflect rename s390-tdep.o -> s390-linux-tdep.o.
* Makefile.in (ALL_TARGET_OBS): Likewise.
(HFILES_NO_SRCDIR): Reflect rename s390-tdep.h ->
s390-linux-tdep.h.
(ALLDEPFILES): Reflect rename of .c files.
Simon Marchi
Pedro Alves
Jan Kratochvil
Yao Qi
Martin Galvan
Andreas Arnez
Tom Tromey
Joel Brobecker
Sergio Durigan Junior
Gary Benson
Ulrich Weigand
Andreas Arnez