tests.
FAIL: gdb.reverse/consecutive-precsave.exp: reload precord save file
FAIL: gdb.reverse/finish-precsave.exp: reload precord save file
FAIL: gdb.reverse/until-precsave.exp: reload core file
FAIL: gdb.reverse/watch-precsave.exp: reload core file
FAIL: gdb.reverse/step-precsave.exp: reload core file
FAIL: gdb.reverse/break-precsave.exp: reload precord save file
FAIL: gdb.reverse/sigall-precsave.exp: reload precord save file
They happen for two reasons.
- mingw32 does not define SIGTRAP, so upon recording a core file, the
signal information will be missing, which in turn causes GDB to not
display the stopping signal when it loads the same core file. An
earlier message warns about this:
"warning: Signal SIGTRAP does not exist on this system."
- The testcase is crafted in a way that expects a pattern of the
stopping signal message instead of a successful core file read message.
The following patch fixes this by changing the old pattern to a more
reasonable one, while still ignoring the fact that mingw32-based GDB
does not record a SIGTRAP in a core file because it does not define
it.
gdb/testsuite/
2014-11-18 Luis Machado <lgustavo@codesourcery.com>
* gdb.reverse/break-precsave: Expect completion message for
core file reads.
* gdb.reverse/consecutive-precsave.exp: Likewise.
* gdb.reverse/finish-precsave.exp: Likewise.
* gdb.reverse/i386-precsave.exp: Likewise.
* gdb.reverse/machinestate-precsave.exp: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/solib-precsave.exp: Likewise.
* gdb.reverse/step-precsave.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* gdb.reverse/watch-precsave.exp: Likewise.
Some testcases, mostly gdb.reverse ones, assume the presence of a
'/' directory separator before the source file name. This is
incorrect for mingw32 hosts, generating false failures for those
tests.
I attempted to catch most of the occurrences of the pattern
".*/$srcfile" and replaced them with ".*$srcfile". The latter
is used elsewhere in the testsuite. The resulting patch is attached.
I also see other occurrences of the same assumption throughout the
testsuite, but usually they are arguments for function calls and i
seem to recall either the test harness or GDB deals with those
paths properly.
gdb/testsuite:
2014-10-17 Luis Machado <lgustavo@codesourcery.com>
* gdb.guile/scm-breakpoint.exp: Do not assume any
directory separators when matching source file paths.
* gdb.python/py-breakpoint.exp: Likewise.
* gdb.reverse/break-precsave.exp: Likewise.
* gdb.reverse/break-reverse.exp: Likewise.
* gdb.reverse/consecutive-precsave.exp: Likewise.
* gdb.reverse/finish-precsave.exp: Likewise.
* gdb.reverse/finish-reverse-bkpt.exp: Likewise.
* gdb.reverse/finish-reverse.exp: Likewise.
* gdb.reverse/i386-precsave.exp: Likewise.
* gdb.reverse/i387-env-reverse.exp: Likewise.
* gdb.reverse/i387-stack-reverse.exp: Likewise.
* gdb.reverse/machinestate-precsave.exp: Likewise.
* gdb.reverse/machinestate.exp: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/solib-precsave.exp: Likewise.
* gdb.reverse/step-precsave.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* gdb.reverse/watch-precsave.exp: Likewise.
* gdb.reverse/watch-reverse.exp: Likewise.
This finally makes background execution commands possible by default.
However, in order to do that, there's one last thing we need to do --
we need to separate the MI and target notions of "async". Unlike the
CLI, where the user explicitly requests foreground vs background
execution in the execution command itself (c vs c&), MI chose to treat
"set target-async" specially -- setting it changes the default
behavior of execution commands.
So, we can't simply "set target-async" default to on, as that would
affect MI frontends. Instead we have to make the setting MI-specific,
and teach MI about sync commands on top of an async target.
Because the "target" word in "set target-async" ends up as a potential
source of confusion, the patch adds a "set mi-async" option, and makes
"set target-async" a deprecated alias.
Rather than make the targets always async, this patch introduces a new
"maint set target-async" option so that the GDB developer can control
whether the target is async. This makes it simpler to debug issues
arising only in the synchronous mode; important because sync mode
seems unlikely to go away.
Unlike in previous revisions, "set target-async" does not affect this
new maint parameter. The rationale for this is that then one can
easily run the test suite in the "maint set target-async off" mode and
have tests that enable mi-async fail just like they fail on
non-async-capable targets. This emulation is exactly the point of the
maint option.
I had asked Tom in a previous iteration to split the actual change of
the target async default to a separate patch, but it turns out that
that is quite awkward in this version of the patch, because with MI
async and target async decoupled (unlike in previous versions), if we
don't flip the default at the same time, then just "set target-async
on" alone never actually manages to do anything. It's best to not
have that transitory state in the tree.
Given "set target-async on" now only has effect for MI, the patch goes
through the testsuite removing it from non-MI tests. MI tests are
adjusted to use the new and less confusing "mi-async" spelling.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Mention "maint set target-async", "set mi-async", and that
background execution commands are now always available.
* target.h (target_async_permitted): Update comment.
* target.c (target_async_permitted, target_async_permitted_1):
Default to 1.
(set_target_async_command): Rename to ...
(maint_set_target_async_command): ... this.
(show_target_async_command): Rename to ...
(maint_show_target_async_command): ... this.
(_initialize_target): Adjust.
* infcmd.c (prepare_execution_command): Make extern.
* inferior.h (prepare_execution_command): Declare.
* infrun.c (set_observer_mode): Leave target async alone.
* mi/mi-interp.c (mi_interpreter_init): Install
mi_on_sync_execution_done as sync_execution_done observer.
(mi_on_sync_execution_done): New function.
(mi_execute_command_input_handler): Don't print the prompt if we
just started a synchronous command with an async target.
(mi_on_resume): Check sync_execution before printing prompt.
* mi/mi-main.h (mi_async_p): Declare.
* mi/mi-main.c: Include gdbcmd.h.
(mi_async_p): New function.
(mi_async, mi_async_1): New globals.
(set_mi_async_command, show_mi_async_command, mi_async): New
functions.
(exec_continue): Call prepare_execution_command.
(run_one_inferior, mi_cmd_exec_run, mi_cmd_list_target_features)
(mi_execute_async_cli_command): Use mi_async_p.
(_initialize_mi_main): Install "set mi-async". Make
"target-async" a deprecated alias.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Non-Stop Mode): Remove "set target-async 1"
from example.
(Asynchronous and non-stop modes): Document '-gdb-set mi-async'.
Mention that target-async is now deprecated.
(Maintenance Commands): Document maint set/show target-async.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* gdb.base/async-shell.exp: Don't enable target-async.
* gdb.base/async.exp
* gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
parameter. Adjust.
(top level): Don't test with "target-async".
* gdb.base/dprintf-non-stop.exp: Don't enable target-async.
* gdb.base/gdb-sigterm.exp: Don't test with "target-async".
* gdb.base/inferior-died.exp: Don't enable target-async.
* gdb.base/interrupt-noterm.exp: Likewise.
* gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
* gdb.mi/mi-nonstop-exit.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-ns-stale-regcache.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.mi/mi-nsmoribund.exp: Likewise.
* gdb.mi/mi-nsthrexec.exp: Likewise.
* gdb.mi/mi-watch-nonstop.exp: Likewise.
* gdb.multi/watchpoint-multi.exp: Adjust comment.
* gdb.python/py-evsignal.exp: Don't enable target-async.
* gdb.python/py-evthreads.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.reverse/break-precsave.exp: Don't test with "target-async".
* gdb.server/solib-list.exp: Don't enable target-async.
* gdb.threads/thread-specific-bp.exp: Likewise.
* lib/mi-support.exp: Adjust to use mi-async.
A patch in the target cleanup series caused a regression when using
record with target-async. Version 4 of the patch is here:
https://sourceware.org/ml/gdb-patches/2014-03/msg00159.html
The immediate problem is that record supplies to_can_async_p and
to_is_async_p methods, but does not supply a to_async method. So,
when target-async is set, record claims to support async -- but if the
underlying target does not support async, then the to_async method
call will end up in that method's default implementation, namely
tcomplain.
This worked previously because the record target used to provide a
to_async method; one that (erroneously, only at push time) checked the
other members of the target stack, and then simply dropped to_async
calls in the "does not implement async" case.
My first thought was to simply drop tcomplain as the default for
to_async. This works, but Pedro pointed out that the only reason
record has to supply to_can_async_p and to_is_async_p is that these
default to using the find_default_run_target machinery -- and these
defaults are only needed by "run" and "attach".
So, a nicer solution presents itself: change run and attach to
explicitly call into the default run target when needed; and change
to_is_async_p and to_can_async_p to default to "return 0". This makes
the target stack simpler to use and lets us remove the method
implementations from record. This is also in harmony with other plans
for the target stack; namely trying to reduce the impact of
find_default_run_target. This approach makes it clear that
find_default_is_async_p is not needed -- it is asking whether a target
that may not even be pushed is actually async, which seems like a
nonsensical question.
While an improvement, this approach proved to introduce the same bug
when using the core target. Looking a bit deeper, the issue is that
code in "attach" and "run" may need to use either the current target
stack or the default run target -- but different calls into the target
API in those functions could wind up querying different targets.
This new patch makes the target to use more explicit in "run" and
"attach". Then these commands explicitly make the needed calls
against that target. This ensures that a single target is used for
all relevant operations. This lets us remove a couple find_default_*
functions from various targets, including the dummy target. I think
this is a decent understandability improvement.
One issue I see with this patch is that the new calls in "run" and
"attach" are not very much like the rest of the target API. I think
fundamentally this is due to bad factoring in the target API, which
may need to be fixed for multi-target. Tackling that seemed ambitious
for a regression fix.
While working on this I noticed that there don't seem to be any test
cases that involve both target-async and record, so this patch changes
break-precsave.exp to add some. It also changes corefile.exp to add
some target-async tests; these pass with current trunk and with this
patch applied, but fail with the v1 patch.
This patch differs from v4 in that it moves initialization of
to_can_async_p and to_supports_non_stop into inf-child, adds some
assertions to complete_target_initialization, and adds some comments
to target.h.
Built and regtested on x86-64 Fedora 20.
2014-03-12 Tom Tromey <tromey@redhat.com>
* inf-child.c (return_zero): New function.
(inf_child_target): Set to_can_async_p, to_supports_non_stop.
* aix-thread.c (aix_thread_inferior_created): New function.
(aix_thread_attach): Remove.
(init_aix_thread_ops): Don't set to_attach.
(_initialize_aix_thread): Register inferior_created observer.
* corelow.c (init_core_ops): Don't set to_attach or
to_create_inferior.
* exec.c (init_exec_ops): Don't set to_attach or
to_create_inferior.
* infcmd.c (run_command_1): Use find_run_target. Make direct
target calls.
(attach_command): Use find_attach_target. Make direct target
calls.
* record-btrace.c (init_record_btrace_ops): Don't set
to_create_inferior.
* record-full.c (record_full_can_async_p, record_full_is_async_p):
Remove.
(init_record_full_ops, init_record_full_core_ops): Update. Don't
set to_create_inferior.
* target.c (complete_target_initialization): Add assertion.
(target_create_inferior): Remove.
(find_default_attach, find_default_create_inferior): Remove.
(find_attach_target, find_run_target): New functions.
(find_default_is_async_p, find_default_can_async_p)
(target_supports_non_stop, target_attach): Remove.
(init_dummy_target): Don't set to_create_inferior or
to_supports_non_stop.
* target.h (struct target_ops) <to_attach>: Add comment. Remove
TARGET_DEFAULT_FUNC.
<to_create_inferior>: Add comment.
<to_can_async_p, to_is_async_p, to_supports_non_stop>: Use
TARGET_DEFAULT_RETURN.
<to_can_async_p, to_supports_non_stop, to_can_run>: Add comments.
(find_attach_target, find_run_target): Declare.
(target_create_inferior): Remove.
(target_has_execution_1): Update comment.
(target_supports_non_stop): Remove.
* target-delegates.c: Rebuild.
2014-03-12 Tom Tromey <tromey@redhat.com>
* gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
New procs. Add target-async tests.
* gdb.reverse/break-precsave.exp (precsave_tests): New proc.
Add target-async tests.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
* gdb.reverse/consecutive-precsave.exp: Use standard_output_file.
* gdb.reverse/finish-precsave.exp: Use standard_output_file.
* gdb.reverse/i386-precsave.exp: Use standard_output_file.
* gdb.reverse/machinestate-precsave.exp: Use standard_output_file.
* gdb.reverse/sigall-precsave.exp: Use standard_output_file.
* gdb.reverse/solib-precsave.exp: Use standard_output_file.
* gdb.reverse/step-precsave.exp: Use standard_output_file.
* gdb.reverse/until-precsave.exp: Use standard_output_file.
* gdb.reverse/watch-precsave.exp: Use standard_output_file.
* gdb.reverse/break-reverse.exp: Use standard_testfile.
* gdb.reverse/consecutive-precsave.exp: Use standard_testfile.
* gdb.reverse/consecutive-reverse.exp: Use standard_testfile.
* gdb.reverse/finish-precsave.exp: Use standard_testfile.
* gdb.reverse/finish-reverse-bkpt.exp: Use standard_testfile.
* gdb.reverse/finish-reverse.exp: Use standard_testfile.
* gdb.reverse/i386-precsave.exp: Use standard_testfile,
prepare_for_testing.
* gdb.reverse/i386-reverse.exp: Use standard_testfile,
prepare_for_testing.
* gdb.reverse/i386-sse-reverse.exp: Use standard_testfile,
prepare_for_testing.
* gdb.reverse/i387-env-reverse.exp: Use standard_testfile,
prepare_for_testing.
* gdb.reverse/i387-stack-reverse.exp: Use standard_testfile,
prepare_for_testing
* gdb.reverse/machinestate-precsave.exp: Use standard_testfile.
* gdb.reverse/machinestate.exp: Use standard_testfile.
* gdb.reverse/next-reverse-bkpt-over-sr.exp: Use standard_testfile.
* gdb.reverse/sigall-precsave.exp: Use standard_testfile,
build_executable.
* gdb.reverse/sigall-reverse.exp: Use standard_testfile,
build_executable.
* gdb.reverse/solib-precsave.exp: Use standard_testfile,
standard_output_file.
* gdb.reverse/solib-reverse.exp: Use standard_testfile,
standard_output_file.
* gdb.reverse/step-precsave.exp: Use standard_testfile.
* gdb.reverse/step-reverse.exp: Use standard_testfile.
* gdb.reverse/until-precsave.exp: Use standard_testfile.
* gdb.reverse/until-reverse.exp: Use standard_testfile.
* gdb.reverse/watch-precsave.exp: Use standard_testfile.
* gdb.reverse/watch-reverse.exp: Use standard_testfile.