Commit Graph

30 Commits

Author SHA1 Message Date
Jason Molenda c5aa993b1f import gdb-1999-07-07 post reformat 1999-07-07 20:19:36 +00:00
Jason Molenda 392a587b05 import gdb-1999-05-25 snapshot 1999-05-25 18:09:09 +00:00
Stan Shebs b83266a0e1 import gdb-19990504 snapshot 1999-05-05 14:45:51 +00:00
Stan Shebs c906108c21 Initial creation of sourceware repository 1999-04-16 01:35:26 +00:00
Stan Shebs 071ea11e85 Initial creation of sourceware repository 1999-04-16 01:34:07 +00:00
Andrew Cagney 3a0c96a996 CARP:
Rewrite INNER_THAN so that it takes parameters.
1998-11-28 22:53:04 +00:00
Andrew Cagney 679ce73102 CARP: Delete ABOUT_TO_RETURN across all targets. 1998-11-26 11:13:01 +00:00
Fred Fish 9391c9977e Changes from: David Mosberger-Tang <davidm@azstarnet.com>
* NEWS:  Add Alpha Linux as a new native configuration.

	* mdebugread.c (parse_symbol): When we find a malloc() symbol with
 	return type VOID, assume no debugging info is available for that
 	object file and patch the return value into VOID *.  Otherwise,
	operations requiring an implicit call to malloc() will fail.

	* infrun.c (wait_for_inferior): The criterion to detect entering a
 	sigtramp handler is now: (a) the current pc is inside a sigtramp
 	handler, (b) the previous pc is not in a sigtramp handler, and (c)
 	the current stack pointer is "inner" than the old one.  Condition
	(c) is new to avoid mistaking a return from a signal handler into
 	sigtramp as a new sigtramp invocation.

	* dcache.c (struct dcache_block): Declare addr as CORE_ADDR.  An
 	int may not be big enough to hold an address.
	(dcache_hit): Ditto.
	(dcache_peek_byte): Fix indentation.

	* configure.in (alpha-*-linux*): Add target.
	* configure: Rebuild

	* config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro.
	(SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto.
	(DYNAMIC_SIGTRAMP_OFFSET): Ditto.
	(SIGCONTEXT_ADDR): Ditto.
	(FRAME_PAST_SIGTRAMP_FRAME): Ditto.

	* config/alpha/alpha-linux.mh: New file.
	* config/alpha/alpha-linux.mt: Ditto.
	* config/alpha/nm-linux.h: Ditto.
	* config/alpha/tm-alphalinux.h: Ditto.
	* config/alpha/xm-alphalinux.h: Ditto.
	* config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h.
	* config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to
 	xm-alphaosf.h.
	* config/alpha/alpha-osf2.mh: Ditto.

	* blockframe.c (find_pc_partial_function): Pass PC to
 	SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems
 	that detect sigtramp code via designated code sequences (as is the
 	case for Linux/Alpha, for example).

	* config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END
	to ignore new PC argument.
	* config/m68k/tm-hp300bsd.h: Ditto.
	* config/vax/tm-vax.h: Ditto.

	* alpha-tdep.c (alpha_linux_sigtramp_offset): New function.
	(alpha_osf_skip_sigtramp_frame): Ditto.
	(push_sigtramp_desc): Ditto.
	(alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract
 	sigcontext address from frame.
	(alpha_saved_pc_after_call): When in sigtramp, use
 	alpha_frame_saved_pc() instead of read-register().
	(after_prologue): When inside a dynamically generated sigtramp
 	function, there is no prologue, so return address of first
 	instruction.
	(alpha_in_prologue): Fix typo in comment.
	(find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine
 	whether we're inside a dynamicaly generated sigtramp function.  If
 	so, create and push and appropriate procedure descriptor.
	(alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain
 	the frame past a sigtramp frame (if the current frame is indeed a
 	sigtramp function).
	(init_extra_frame_info): Don't read next frame register off of
 	stack-pointer when inside a dynamiccaly generated sigtramp.
	(alpha_pop_frame): Also unlink and destroy procedure descriptors
 	created for dynamically generated sigtramp functions.

	* alpha-nat.c: When compiling under Linux, include <asm/reg.h> and
 	<alpha/ptrace.h> instead of <machine/reg.h>
1996-05-26 21:41:40 +00:00
Fred Fish a1df8e780c * coredep.c: Renamed to core-aout.c
* core-svr4.c: Renamed to core-regset.c
	* Makefile.in (ALLDEPFILES): Account for renamings.
	* corelow.c (core_file_fns): Add, points to chain of structs.
	(add_core_fns): New function to build chain of structs.
	(get_core_registers): Modify to search core functions chain and call
 	appropriate fetch_core_registers function based on core file flavour.
	* gdbcore.h (fetch_core_registers):  Remove declaration.
	(struct core_fns): Define struct for core function info.
	* i386m3-nat.c: Update comment for filename change (coredep->core-aout)
	* a68v-nat.c (fetch_core_registers): Remove stub, not needed now.
	* alpha-nat.c (fetch_core_registers): Make static.
	(alpha_core_fns, _initialize_core_alpha): New struct and func.
	* core-aout.c (fetch_core_registers): Make static
	(aout_core_fns, _initialize_core_aout): New struct and func.
	* core-regset.c (fetch_core_registers): Make static.
	(regset_core_fns, _initialize_core_regset): New struct and func.
	* core-sol2.c (fetch_core_registers): Make static.
	(solaris_core_fns, _initialize_core_solaris): New struct and func.
	* hp300ux-nat.c (fetch_core_registers): Make static.
	(hp300ux_core_fns, _initialize_core_hp300ux): New struct and func.
	* i386aix-nat.c (fetch_core_registers): Make static.
	(i386aix_core_fns, _initialize_core_i386aix): New struct and func.
	* i386mach-nat.c (fetch_core_registers: Make static.
	(i386mach_core_fns, _initialize_core_i386mach): New struct and func.
	* irix4-nat.c (fetch_core_registers): Make static.
	(irix4_core_fns, _initialize_core_irix4): New struct and func.
	* irix5-nat.c (fetch_core_registers):
	(irix5_core_fns, _initialize_core_irix5): New struct and func.
	* lynx-nat.c (fetch_core_registers): Make static.
	(lynx_core_fns, _initialize_core_lynx): New struct and func.
	* mips-nat.c (fetch_core_registers): Make static.
	(mips_core_fns, _initialize_core_mips): New struct and func.
	* ns32km3-nat.c (fetch_core_registers): Remove stub.
	* rs6000-nat.c (fetch_core_registers): Make static.
	(rs6000_core_fns, _initialize_core_rs6000): New struct and func.
	* sparc-nat.c (fetch_core_registers): Make static.
	(sparc_core_fns, _initialize_core_sparc): New struct and func.
	* sun3-nat.c (fetch_core_registers):
	(sun3_core_fns, _initialize_core_sun3): New struct and func.
	* sun386-nat.c (fetch_core_registers): Remove stub.
	* ultra3-nat.c (fetch_core_registers): Make static.
	(ultra3_core_fns, _initialize_core_ultra3): New struct and func.
	* config/gould/pn.mh (XDEPFILES),
 	config/i386/fbsd.mh (NATDEPFILES),
	config/i386/i386bsd.mh (NATDEPFILES),
 	config/i386/i386m3.mh (XDEPFILES),
	config/i386/i386sco.mh (NATDEPFILES),
	config/i386/i386sco4.mh (NATDEPFILES),
	config/i386/i386v.mh (NATDEPFILES),
	config/i386/i386v32.mh (NATDEPFILES),
	config/i386/nbsd.mh (NATDEPFILES),
	config/i386/ptx.mh (XDEPFILES),
	config/i386/ptx4.mh (XDEPFILES),
	config/i386/symmetry.mh (NATDEPFILES),
	config/m68k/3b1.mh (XDEPFILES),
	config/m68k/cisco.mt (TDEPFILES),
	config/m68k/delta68.mh (NATDEPFILES),
	config/m68k/dpx2.mh (NATDEPFILES),
	config/m68k/hp300bsd.mh (NATDEPFILES),
	config/m68k/hp300hpux.mh (NATDEPFILES),
	config/m68k/isi.mh (XDEPFILES),
	config/m68k/news.mh (NATDEPFILES),
	config/m68k/news1000.mh (XDEPFILES),
	config/m88k/cxux.mh (NATDEPFILES),
	config/m88k/delta88.mh (NATDEPFILES),
	config/mips/littlemips.mh (XDEPFILES),
	config/mips/mipsm3.mh (XDEPFILES),
	config/ns32k/merlin.mh (XDEPFILES),
	config/ns32k/nbsd.mh (NATDEPFILES),
	config/ns32k/ns32km3.mh (NATDEPFILES),
	config/pa/hppabsd.mh (NATDEPFILES),
	config/pa/hppahpux.mh (NATDEPFILES),
	config/romp/rtbsd.mh (XDEPFILES),
	config/tahoe/tahoe.mh (XDEPFILES),
	config/vax/vaxbsd.mh (XDEPFILES),
	config/vax/vaxult.mh (NATDEPFILES),
	config/vax/vaxult2.mh (NATDEPFILES),
	Account for coredep.o to core-aout.o name change.
	* config/i386/i386dgux (NATDEPFILES),
	config/i386/i386sol2.mh (NATDEPFILES),
	config/i386/i386v4.mh (NATDEPFILES),
	config/i386/linux.mh (NATDEPFILES),
	config/i386/ncr3000.mh (NATDEPFILES),
	config/m68k/m68kv4.mh (NATDEPFILES),
	config/m88k/delta88v4.mh (NATDEPFILES),
	config/mips/mipsv4.mh (NATDEPFILES),
	Account for core-svr4.o to core-regset.o name change.
1996-01-11 20:08:15 +00:00
Fred Fish 6c9638b444 Update FSF address. 1995-08-02 03:41:12 +00:00
J.T. Conklin 2b57629364 * configure.in: Check for working mmap, ansi headers, string.h,
strings.h, and memory.h.
* configure: Regenerated.

* gdb_stat.h: New file, "portable" <sys/stat.h>.
* gdb_string.h: New file, "portable" <string.h>.

* altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c,
convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c,
gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c,
i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c,
mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c,
rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c,
symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c,
ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h"
instead of <sys/stat.h>.

* alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c,
ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c,
core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c,
dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c,
exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c,
fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c,
inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c,
m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c,
monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c,
printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c,
remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c,
remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c,
remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c,
remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c,
remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c,
solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c,
symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c,
valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include
"gdb_string.h" instead of <string.h>.
* gdbtk.c: Likewise.

* config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h,
sparc/xm-sun4os4.h (HAVE_MMAP): Removed.

* config/xm-lynx.h, config/i386/xm-ptx.h,
config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h,
config/mips/xm-irix3.h, config/mips/xm-mips.h,
config/mips/xm-news-mips.h, config/mips/xm-riscos.h,
config/pa/hppah.h, config/rs6000/xm-rs6000.h,
config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h,
config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h,
config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed.
* config/mips/xm-irix3.h, config/mips/xm-mips.h,
config/pa/xm-hppah.h (memcpy, memset): Removed declarations.
1995-08-01 20:14:27 +00:00
Jim Kingdon 16726dd15b The point of these changes is to avoid reading the frame pointer
and stack pointer during stepping, to speed things up.
	A.  Changes to not select a frame until we need a selected frame:
	    * blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
	    * infrun.c (wait_for_inferior): Move call to select_frame back to
	    normal_stop.  This reverts a change of 13 Apr 94 (it says Jeff
	    Law, but the change was my idea); the only reason for that change
	    was so we could save and restore the selected frame in
	    wait_for_inferior, and now that flush_cached frames clears the
	    selected frame, that should work OK now.
	B.  Changes to not create a current_frame until we need one:
	    * blockframe.c (get_current_frame): If current_frame is NULL, try
	    to create an innermost frame.
	    * sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
	    infrun.c (wait_for_inferior), thread.c (thread_switch),
	    convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
	    alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
	    h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
	    hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
	    i960-tdep.c (pop_frame), m68k-tdep.c
	    (m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
	    (push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
	    (pop_frame), config/arm/tm-arm.h (POP_FRAME),
	    config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
	    (POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
	    config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
	    (POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
	    call create_new_frame.
	    * corelow.c (core_open), altos-xdep.c (core_file_command),
	    arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
	    m3-nat.c (select_thread), sun386-nat.c (core_file_command),
	    umax-xdep.c (core_file_command): Don't call create_new_frame; do
	    call flush_cached_frames.
	    * blockframe.c (reinit_frame_cache): Don't call create_new_frame
	    or select_frame.
	C.  Changes to get rid of stop_frame_address and instead only
	fetch the frame pointer when we need it.
	    * breakpoint.c (bpstat_stop_status): Remove argument
	    frame_address; use FRAME_FP (get_current_frame ()).
	    * infrun.c (wait_for_inferior): Don't pass frame pointer to
	    bpstat_stop_status.
	    * infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
	    ()) instead of stop_frame_address.
	    * infrun.c (save_inferior_status, restore_inferior_status),
	    inferior.h (struct inferior_status): Don't save and restore
	    stop_frame_address.
	    * inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
	    (select_thread): Remove stop_frame_address and uses thereof.
	D.  Same thing for the stack pointer.
	    * infrun.c (wait_for_inferior): Remove stop_sp and replace
	    uses thereof with read_sp ().
	E.  Change to eliminate one nasty little spot where we were
	wanting to know the frame pointer from before the current step
	(idea from GDB 3.5, which saved my ass, because my other ideas of
	how to fix it were very baroque).
	    * infrun.c: Remove prev_frame_address.
	    * infrun.c (wait_for_inferior, step_over_function): Use
	    step_frame_address instead of prev_frame_address.
	F.  Same basic idea for the stack pointer.
	    * inferior.h, infcmd.c: New variable step_sp.
	    * infcmd.c (step_1, until_next_command): Set it.
	    * infrun.c: Remove prev_sp and replace uses by step_sp.
	    * infrun.c (wait_for_inferior): If we get out of the step
	    range, then set step_sp to the current stack pointer before we
	    start going again.
1994-10-08 03:41:21 +00:00
Stan Shebs 7f4a859c42 * config/i386/{i386aix.mh, i386bsd.mh, i386lynx.mh, i386sco.mh,
i386sco4.mh, i386sol2.mh, i386v.mh, i386v32.mh, i386v4.mh,
	ncr3000.mh, ptx.mh, ptx4.mh}, config/m68k/{altos.mh, apollo68v.mh,
	delta68.mh, dpx2.mh, hp300bsd.mh, hp300hpux.mh, m68klynx.mh,
	m68kv4.mh}, config/m88k/{delta88.mh, delta88v4.mh},
	config/mips/riscos.mh, config/pa/hppahpux.mh,
	config/sparc/{sparclynx.mh, sun4sol2.mh}, config/tahoe/tahoe.mh,
	config/vax/{vaxbsd.mh, vaxult.mh, vaxult2.mh} (REGEX, REGEX1,
	SYSV_DEFINE): No longer define.
	* config/i386/i386sco4.mh (MUNCH_DEFINE): No longer define.
1994-09-17 00:32:25 +00:00
Jim Kingdon d8fc877318 * source.c (find_source_lines): Always use code that was #ifdef
BROKEN_LARGE_ALLOCA.  Do the cleanup before returning, rather than
	leaving it on the chain.  Reindent much of this function.
	* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
	config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
	config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
	config/ns32k/xm-ns32km3.h: Remove all references to
	BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
	* main.c, fork-child.c, many config files: Remove all
	SET_STACK_LIMIT_HUGE code; with the above changes it should no
	longer be needed.

	* symtab.c (lookup_partial_symbol): Use if and abort, not assert.
	This avoids __eprintf troubles.

	* main.c (main): Surround in #ifndef MAIN_OVERRIDE.  Move
	initialization code which needs to be called even if we bypass the
	command line stuff into gdb_init.
	* utils.c (fputs_unfiltered): Surround in #ifndef
	FPUTS_UNFILTERED_OVERRIDE.
	* Makefile.in (libgdb.a): New target.

	* utils.c: Rearrange I/O stuff a bit so that all output goes
	through fputs_unfiltered.  Use vasprintf; removes arbitrary limit
	which made %s not work with arbitrarily large strings.
	* printcmd.c (printf_command): Use printf_filtered, not
	printf_unfiltered and printf, now that arbitrary limit is gone.
1994-05-14 19:37:57 +00:00
Peter Schauer f0d2557ca4 * config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET):  Define.
1994-01-07 21:02:39 +00:00
Jim Kingdon f4f0d17487 * valops.c (call_function_by_hand, push_word), defs.h (push_word),
convex-xdep.c, m88k-nat.c, i386m3-nat.c, mips-tdep.c, mipsm3-nat.c,
	ns32km3-nat.c, remote-bug.c, m88k-tdep.c, remote-hms.c, remote-mips.c,
	config/gould/tm-np1.h, hppa-tdep.c (hppa_fix_call_dummy), remote-vx.c:
	Use REGISTER_SIZE, unsigned LONGEST, and
	{store,extract}_unsigned_integer, instead of sizeof
	(REGISTER_TYPE) and REGISTER_TYPE.
	* All tm.h files: Change REGISTER_TYPE to REGISTER_SIZE.
	* hppa-tdep.c (pa_print_fp_reg): Remove unused variable val.

	* Makefile.in (ALLDEPFILES): Remove i386ly-nat.c and m68kly-nat.c.
	Add lynx-nat.c.
1993-12-26 18:10:22 +00:00
Peter Schauer ad09cb2bd3 * findvar.c (value_of_register, value_from_register),
hppa-tdep.c (pa_print_fp_reg), infcmd.c (do_registers_info),
	valops.c (value_assign):   Use REGISTER_CONVERT_TO_* only if
	REGISTER_CONVERTIBLE is defined, otherwise just copy the content.
	Pass desired type to REGISTER_CONVERT_TO_*.

	* config/m68k/tm-m68k.h, config/i960/tm-i960.h (REGISTER_CONVERT_*):
	Pass length of desired type to store/extract_floating.
	* config/i386/tm-arm.h, config/i386/tm-i386aix.h,
	config/i386/tm-sun386.h, config/i386/tm-symmetry.h,
	config/m88k/tm-m88k.h config/rs6000/tm-rs6000.h (REGISTER_CONVERT_*):
	Use extract_floating and store_floating with length of desired type.
	* config/m68k/tm-news.h (STORE,EXTRACT_RETURN_VALUE):  Add type
	parameter to REGISTER_CONVERT_*.

	* config/a29k/tm-a29k.h, config/convex/tm-convex.h,
	config/gould/tm-np1.h, config/gould/tm-pn.h, config/h8300/tm-h8300.h,
	config/h8500/tm-h8500.h, config/i386/tm-i386v.h,
	config/mips/tm-mips.h, config/ns32k/tm-merlin.h,
	config/ns32k/tm-umax.h, config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
	config/sh/tm-sh.h, config/sparc/tm-sparc.h, config/tahoe/tm-tahoe.h,
	config/vax/tm-vax.h, config/z8k/tm-z8k.h (REGISTER_CONVERTIBLE,
	REGISTER_CONVERT_TO_RAW, REGISTER_CONVERT_TO_VIRTUAL):  Remove
	versions for which REGISTER_CONVERTIBLE is always false.
	* z8k-tdep.c (register_convert_to_virtual, register_convert_to_raw):
	Remove, no longer used.

	* alpha-tdep.c (alpha_register_convert_to_raw,
	alpha_register_convert_to_virtual):  New routines to handle
	the different raw formats in alpha floating point registers.
	* config/alpha/tm-alpha.h (REGISTER_CONVERTIBLE,
	REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW):  Use them.
1993-11-02 21:51:10 +00:00
K. Richard Pixley 4ed97c9a83 bzero -> memset 1993-09-01 21:56:42 +00:00
K. Richard Pixley ade40d3153 bcopy -> memcpy 1993-09-01 20:37:15 +00:00
Jim Kingdon 0e646bd577 * config/vax/xm-vaxult.h: Define NO_PTRACE_H. 1993-08-24 15:23:23 +00:00
Peter Schauer 486c47b94f * config/vax/tm-vax.h (BELIEVE_PCC_PROMOTION): Define. 1993-08-20 05:10:48 +00:00
Peter Schauer 7b98a09136 * config/i386/tm-i386bsd.h (SIGTRAMP_START, SIGTRAMP_END, FRAME_CHAIN,
FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC, SIGCONTEXT_PC_OFFSET):
	Define to make backtracing through sigtramp work.
	* config/vax/tm-vax.h (SIGTRAMP_START, SIGTRAMP_END, TARGET_UPAGES,
	FRAME_SAVED_PC, SIGCONTEXT_PC_OFFSET):  Ditto.
1993-08-17 08:49:07 +00:00
Fred Fish b5ed6e32c2 Remove '.Sanitize' from explicit list of Things-to-lose. It is now implicitly
added to the list by Sanitize, unless Sanitize knows it needs to keep it.
1993-08-02 23:29:32 +00:00
Fred Fish 775d4a4096 Add .Sanitize to Things-to-lose list. 1993-07-30 16:46:19 +00:00
Jim Kingdon 23a8e2915c * frame.h, blockframe.c, stack.c, a29k-tdep.c,
config/gould/tmp-{pn,np1}.h,
	config/{sparc/tm-sparc.h,pyr/tm-pyr.h,vax/tm-vax.h}: Remove field
	next_frame from struct frame_info.  It has no purpose beyond
	->next->frame and is an artifact from GDB 2.8.
1993-07-07 20:29:56 +00:00
Jim Kingdon 95f2d25323 * config/vax/xm-vaxult2.h: Define FD_SET and FD_ZERO. 1993-07-01 01:10:22 +00:00
K. Richard Pixley 87756e15db added things-to-lose sections 1993-05-27 06:44:29 +00:00
Jim Kingdon cdaa790509 * config/vax/vaxbsd.mh: Add "NAT_FILE= nm-vax.h".
* config/vax/xm-vaxbsd.h: Use <sys/param.h> not <machine/limits.h>
1993-05-19 02:01:05 +00:00
Fred Fish b0cb2d9154 Add .Sanitize files for new directories. 1993-03-23 03:58:44 +00:00
Fred Fish 5076de826c * config/{*.mt, *.mh}: All target and host makefile fragment
config files moved to an appropriate config/<cpu> subdirectory.
	* nm-*, xm-*, tm-*:  All native, host, and target files, which
	get linked to nm.h, xm.h, and tm.h respectively by configure,
	moved to appropriate config/<cpu> subdirectory.
1993-03-23 01:19:58 +00:00