Allow GDB to run on Linux 2.0 again.
* config.in: Add HAVE_PTRACE_GETREGS.
* configure.in: Check if <sys/ptrace.h> defines PTRACE_GETREGS.
* configure: Regenerated.
* config/i386/nm-linux.h (CANNOT_FETCH_REGISTER,
CANNOT_STORE_REGISTER): New defines.
* i386-linux-nat.c (have_ptrace_getregs): New variable.
(PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register,
old_fetch_inferior_registers, CANNOT_STORE_REGISTER,
store_register, old_store_inferior_registers): Copied over from
`inptrace.c' as a temporary measure.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs):
Conditionalize on HAVE_PTRACE_GETREGS. Define stubs if
HAVE_PTRACE_GETREGS isn't defined.
(fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails
with EIO.
(fetch_inferior_registers, store_inferior_registers): Fall back on
the method use in `infptrace.c' (by calling
old_fetch_inferior_registers and old_store_inferior_registers) if
`have_ptrace_getregs' isn't set.
Make cross-compilation for the Hurd more friendly.
From Jeff Bailey <jbailey@gnu.org>:
* configure.in: Use AC_CHECK_TOOL to find MiG.
* Makefile.in (MIG): New variable.
* config/i386/i386gnu.mh (MIG): Remove.
* configure: Regenerated.
* configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
prfpregset_t in <sys/procfs.h>.
* config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
HAVE_PRFPREGSET_T.
* gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
prgregset_t and prfpregset_t if they are not already present.
* configure.in: Remove the addition of sol-thread.c to the
CONFIG_INITS list. This caused problems with init.c, because
sol-thread.c would be grepped twice for _initialize_* functions.
* configure: Ditto.
* Makefile.in: Add FIXME for init.c.
* gnu-regex.c: Check ENABLE_NLS instead of HAVE_LIBINTL_H.
* configure.in: Don't check for libintl.h.
* configure, config.in: Regenerated.
Fixes a problem on debian systems, a conflict between the
/usr/include/libintl.h and the routines that are actually linked in,
up in ../intl.
* Makefile.in: Add GDBTK_CFLAGS - this is now used to hold
-fwritable-strings when compiling with Tk8.1.
* configure.in: Add GDBTK_CFLAGS, set it to -fwritable-strings for
Tcl/Tk8.1 & greater.
* acinclude.m4: Move the rest of the defines to find Itcl, Itk &
Tix from aclocal.m4 to here.
* aclocal.m4: regenerate.
* configure: regenerate.
* gdbtk-hooks.c (x_event): Tcl_ObjGetVar2 was removed from
Tcl8.1. Use Tcl_GetVar2 instead.
* gdbtk-hooks.c (gdbtk_trace_find): Fix up call to
Tcl_GlobalEvalObj for Tcl/Tk 8.1.
* gdbtk-hooks.c (gdbtk_trace_start_stop): Call to Tcl_EvalObj was
inefficient, replace with call to Tcl_GlobalEval.
* gdbtk.c: Don't swap out the Tcl_Alloc calls in gdbtk.c. We took
care of that in Tcl itself for 8.1.
* gdbtk.c: Remove const from the script string since Tcl8.1 has
taken to scribbling sentinals into strings passed to it again...
* gdbtk-cmds.c (wrapped_call): Change declaration of 1st arg from
char * to PTR to eliminate warning.
* gdbtk-cmds.c (perror_with_name_wrapper): Ditto
at run-time. At the moment, the only thing this affects is the
set of registers visible.
* config/rs6000/tm-rs6000.h (REGISTER_NAME): Define this as a call
to the function rs6000_register_name.
(rs6000_register_name): Include extern decl.
(NUM_REGS): Bump to 183. What's the right way to do this?
(FIRST_UISA_SP_REGNUM, LAST_UISA_SP_REGNUM): Renamed from
FIRST_SP_REGNUM, LAST_SP_REGNUM.
(REGISTER_BYTES): Recompute this.
* rs6000-tdep.c: Renamed all uses of FIRST_SP_REGNUM and
LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
some concomitant formatting changes.
#include "gdbcmd.h", so we can define commands here.
(struct variant): New structure.
(COMMON_UISA_REG_NAMES, PPC_UISA_SPR_NAMES, PPC_SEGMENT_REG_NAMES,
PPC_32_OEA_SPR_NAMES, num_registers): New macros.
(register_names_rs6000, register_names_uisa, register_names_403,
register_names_403GC, register_names_505, register_names_860,
register_names_601, register_names_602, register_names_603,
register_names_604, register_names_750, variants): New variables.
(rs6000_register_name, install_variant, find_variant_by_name,
install_variant_by_name, list_variants, show_current_variant,
set_processor, show_processor): New functions.
(_initialize_rs6000_tdep): Define new commands `set processor' and
`show processor', and call install_variant_by_name to set the
default variant.
* rs6000-nat.c: Renamed all uses of FIRST_SP_REGNUM and
LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
some concomitant formatting changes.
* configure.in: Accept the `--with-cpu' flag, to specify a default
processor variant.
* acconfig.h: Provide a blurb for TARGET_CPU_DEFAULT, which is set
by configure's `--with-cpu' flag.
* config.in, configure: Regenerated.
* utils.c: <readline/readline.h> instead of "readline/readline.h".
* configure.in (TERM_LIB): Search for the appropriate term library
on the host system.
* configure: Regenerated.
* Makefile.in (TERMCAP): Set based on autoconf check.
* config/*/*.mh: Don't override TERMCAP setting.
* configure.in (with-sim-gpu2): Do not emit a -L argument without
an associated pathname. Link in the math library after the gpu2
library.
Assumes that libm is around (and doesn't take advantage of the
AC_CHECK_LIB(m) that is already in configure.in), but this is a
minor point and unlikely to cause problems.
Changes to account for name change from cygwin32 to cygwin and
clean up Win32-related ifdefs.
* configure.tgt: check for cygwin* instead of cygwin32.
New cygwin gdb_target variable loses the "32".
* configure.host: check for cygwin* instead of cygwin32.
New cygwin gdb_host variable loses the "32".
* configure.in: test __CYGWIN__ instead of __CYGWIN32__,
rename gdb_cv_os_cygwin32 variable to drop the "32". Call
AM_EXEEXT instead of AC_EXEEXT since that isn't in a released
autoconf yet.
* configure: regenerate.
* main.c: drop "32" from cygwin_ funcs, include sys/cygwin.h
where
cygwin path conv protos live, instead of adding a proto here
for
them here.
* {main.c, ser-tcp.c, ser-unix.c, top.c}: check __CYGWIN__
instead of __CYGWIN32__.
* source.c: thoughout, check _WIN32 instead of WIN32.
* config/i386/cygwin32.mh: delete.
* config/i386/cygwin.mh: new file, was cygwin32.mh.
* config/i386/cygwin32.mt: delete.
* config/i386/cygwin.mt: new file, was cygwin32.mt.
* config/i386/tm-cygwin32.h: delete.
* config/i386/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/i386/xm-cygwin32.h: delete.
* config/i386/xm-cygwin.h: new file, was xm-cygwin32.h.
* config/i386/xm-windows.h: #include xm-cygwin.h now.
* config/powerpc/cygwin32.mh: delete.
* config/powerpc/cygwin.mh: new file, was cygwin32.mh.
* config/powerpc/cygwin32.mt: delete.
* config/powerpc/cygwin.mt: new file, was cygwin32.mt.
* config/powerpc/tm-cygwin32.h: delete.
* config/powerpc/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/powerpc/xm-cygwin32.h: delete.
* config/powerpc/xm-cygwin.h: new file, was xm-cygwin32.h.
* rdi-share/aclocal.m4: regenerate with aclocal.
* rdi-share/configure: regenerate with autoconf.
* rdi-share/{host.h, hostchan.c, hostchan.h, serdrv.c,
* serpardr.c,
unixcomm.c}: check __CYGWIN__ instead of __CYGWIN32__.
* patch approved by shebs
Wed Oct 28 12:33:52 EST 1998 Frank Ch. Eigler <fche@cygnus.com>
* configure.in: Accept both -skyb- and -sky- for
--with-sim-funit/gpu2 options.
* configure: Rebuilt.
Andrew Cagney
Mark Kettenis
Fernando Nasser
Elena Zannoni
Jason Molenda
Stan Shebs
Jim Ingham
Christopher Faylor
Jim Blandy
David Taylor
Geoffrey Noer
Frank Ch. Eigler