The main aim of this change was to have non_ir_ref set correctly on
new indirect symbols. I could have added a "copy" param to the "notice"
function, so that indirect symbols could be created in plugin_notice,
but it seemed cleaner to create indirect syms earlier and pass them
rather than "string" to "notice".
include/
* bfdlink.h (struct bfd_link_callbacks <notice>): Remove "string"
param, add "inh".
bfd/
* coff-aux.c (coff_m68k_aux_link_add_one_symbol): Only call "notice"
here when not calling the generic add_symbol function. Formatting.
Correct handling of indirect symbols. Update notice call.
* elflink.c (_bfd_elf_notice_as_needed): Update notice call.
* linker.c (_bfd_generic_link_add_one_symbol): Create indirect
symbols early. Update notice call. Add comments regarding weak
symbols vs. indirect.
ld/
* ldmain.c (notice): Update args.
* plugin.c (plugin_notice): Likewise. Follow warning sym link.
Handle new indirect symbol.
* lib/ld-lib.exp (check_lto_fat_available): New.
(check_lto_available): Remove -ffat-lto-objects test.
* ld-plugin/lto.exp: Use [list ] rather than { } to set up list
variables, allowing substition of vars. Set lto_fat and plug_opt
and add to various tests.
Override the default value of 0x0000 defined in
TEXT_START_ADDR to avoid linux executables to be mapped
at zero page.
ld/
* emulparams/elf32or1k_linux.sh (TEXT_START_ADDR): Increase from
0x0 to first page boundary at 0x2000.
Relocations against .got.plt section may not be in the same order as
entries in PLT section. It is incorrect to assume that the Ith reloction
index against .got.plt section always maps to the (I + 1)th entry in PLT
section. This patch matches the .got.plt relocation offset/index in PLT
entry against the index in .got.plt relocation table. It only checks
R_*_JUMP_SLOT and R_*_IRELATIVE relocations. It ignores R_*_TLS_DESC
and R_*_TLSDESC relocations since they have different PLT entries.
bfd/
PR binutils/17154
* elf32-i386.c (elf_i386_plt_sym_val): Only match R_*_JUMP_SLOT
and R_*_IRELATIVE relocation offset with PLT entry.
* elf64-x86-64.c (elf_x86_64_plt_sym_val): Likewise.
(elf_x86_64_plt_sym_val_offset_plt_bnd): New.
(elf_x86_64_get_synthetic_symtab): Use it.
ld/testsuite/
PR binutils/17154
* ld-ifunc/pr17154-i386.d: New file.
* ld-ifunc/pr17154-x86-64.d: Likewise.
* ld-ifunc/pr17154-x86.s: Likewise.
* ld-x86-64/bnd-ifunc-2.d: Likewise.
* ld-x86-64/bnd-ifunc-2.s: Likewise.
* ld-x86-64/mpx.exp: Run bnd-ifunc-2.
* ld-x86-64/tlsdesc-nacl.pd: Updated.
* ld-x86-64/tlsdesc.pd: Likewise.
Commit e1f987424b changed how
next_tls_desc_index was set up. This patch updates
elf_i386_compute_jump_table_size to use elf.srelplt->reloc_count
instead of next_tls_desc_index.
bfd/
PR ld/17057
* elf32-i386.c (elf_i386_compute_jump_table_size): Replace
next_tls_desc_index with elf.srelplt->reloc_count.
ld/testsuite/
PR ld/17057
* ld-i386/i386.exp: Run pr17057.
* ld-i386/pr17057.d: New file.
* ld-i386/pr17057.s: Likewise.
Specify -T relocs.ld for emit-relocs-local-addend.d to be consistent
will all other emit-relocs* testcases
ld/testsuite/
* ld-aarch64/emit-relocs-local-addend.d: Use target linker script.
is_inconsistent_linkonce_section makes an assumption that section name
that starts with ".gnu.linkonce.prop." has one more dot in its suffix.
However gas generates such section name by insertion of "prop." right
after ".gnu.linkonce." part of the name of the original section. So, for
section named ".gnu.linkonce.this_module" corresponding property section
name does not satisfy the assumption. Such section names are common in
linux modules. This bug was exposed by the patch "a35d5e8 Fix alignment
for the first section frag on xtensa", that makes gas produce property
section for each section that has ".align" directive in it.
Use suffix that immediately follows ".gnu.linkonce.prop." when there are
no more dots following it.
2014-07-10 Max Filippov <jcmvbkbc@gmail.com>
ld/
* emultempl/xtensaelf.em (is_inconsistent_linkonce_section):
correctly handle missing dot in section name after
".gnu.linkonce.prop.".
With this change all gas and most ld tests pass when configured for
arm-linux. It doesn't look like these configurations have been
tested in a long time but this attempts to stem the bit-rot slightly.
gas/testsuite/ChangeLog:
2014-07-10 Will Newton <will.newton@linaro.org>
* gas/arm/bl-local-2.d: Only enable the test on EABI and
NaCl configurations.
* gas/arm/bl-local-v4t.d: Likewise.
* gas/arm/blx-local.d: Likewise.
* gas/arm/branch-reloc.d: Likewise.
ld/testsuite/ChangeLog:
2014-07-10 Will Newton <will.newton@linaro.org>
* ld-arm/arm-elf.exp (armelftests_nonacl): Move Cortex-A8 fix
tests, IFUNC tests and other EABI requiring tests to...
(armeabitests_nonacl): ...here.
* ld-arm/arm-app-abs32.d: Loosen regex for architecture type
to allow test to pass on configurations without an attributes
section.
* ld-arm/arm-app.d: Likewise.
* ld-arm/arm-lib-plt32.d: Likewise.
* ld-arm/arm-lib.d: Likewise.
* ld-arm/arm-static-app.d: Likewise.
* ld-arm/armthumb-lib.d: Likewise.
* ld-arm/cortex-a8-far.d: Likewise.
* ld-arm/farcall-mixed-app.d: Likewise.
* ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* ld-arm/farcall-mixed-lib.d: Likewise.
* ld-arm/mixed-app-v5.d: Likewise.
* ld-arm/mixed-app.d: Likewise.
* ld-arm/mixed-lib.d: Likewise.
* ld-arm/tls-app.d: Likewise.
* ld-arm/tls-descrelax-be32.d: Likewise.
* ld-arm/tls-descrelax.d: Likewise.
* ld-arm/tls-descseq.d: Likewise.
* ld-arm/tls-gdesc-got.d: Likewise.
* ld-arm/tls-gdesc.d: Likewise.
* ld-arm/tls-gdierelax.d: Likewise.
* ld-arm/tls-gdierelax2.d: Likewise.
* ld-arm/tls-gdlerelax.d: Likewise.
* ld-arm/tls-lib-loc.d: Likewise.
* ld-arm/tls-lib.d: Likewise.
* ld-arm/tls-thumb1.d: Likewise.
ARM doesn't support non-PIC shared libraries so don't run those
tests.
ld/testsuite/ChangeLog:
2014-07-10 Will Newton <will.newton@linaro.org>
* ld-elfvers/vers.exp: Set pic to yes for ARM targets.
Increase the maximum page size to 64kB and align the TEXT_START_ADDR
to a 64kB boundary. This brings AArch32 in line with AArch64 and
improves compatability under certain conditions.
bfd/ChangeLog:
2014-07-08 Will Newton <will.newton@linaro.org>
* elf32-arm.c (ELF_MAXPAGESIZE): Increase the default
value to 64kB and remove custom setting for NaCl.
ld/ChangeLog:
2014-07-08 Will Newton <will.newton@linaro.org>
* emulparams/armelf_linux.sh (TEXT_START_ADDR): Increase
alignment to 64kB boundary.
ld/testsuite/ChangeLog:
2014-07-08 Will Newton <will.newton@linaro.org>
* ld-arm/arm-lib.ld: Increase MAXPAGESIZE value to
match bfd.
* ld-arm/cortex-a8-fix-bl-rel-plt.d: Update offsets to
take into account increased segment alignment.
* ld-arm/ifunc-gdesc.r: Likewise.
* ld-arm/tls-lib.d: Likewise.
This fixes a problem seen on powerpc64le ELFv2 when creating a
function symbol alias with ld --defsym. st_other needs to be copied
from the source symbol to the alias in order to set up the local entry
offset for the alias. I decided to make this change in the generic
ELF code rather than in elf64-ppc.c since it looks like other targets
that use st_other bits might benefit too.
bfd/
* elflink.c (_bfd_elf_copy_link_hash_symbol_type): Copy st_other
bits from source to dest.
* linker.c (_bfd_generic_copy_link_hash_symbol_type): Update comment.
* targets.c (struct bfd_target <_bfd_copy_link_hash_symbol_type>):
Likewise.
* bfd-in2.h: Regenerate.
ld/testsuite/
* ld-powerpc/defsym.s, * ld-powerpc/defsym.d: New test.
* ld-powerpc/powerpc.exp: Run it.
Objects built with -fno-fat-lto-objects (the default for gcc-4.9) have
no normal symbols, except things like __gnu_lto_slim. These useless
symbols are the ones put into the archive index, and of course nothing
references them so no objects are extracted by the linker. Running
ar with --plugin changes ar behaviour to put the lto symbols into the
archive index.
PR 17112
* ld-plugin/lto.exp: When building liblti-11.a, pass
--plugin path_to_gcc/liblto_plugin.so to ar.
toolchain that just contains the binutils - ie without a compiler.
* lib/ld-lib.exp (check_lto_available): Check that a compiler is
available before testing for LTO support.
Various ld-elf/shared.exp and ld-plugin/lto.exp tests simply appended
the testsuite -B options intended to force gcc use the linker under test.
This fails if $CC itself has -B options, as when setting CC to run gcc
out of a build directory. Net result is that tests were run using
the gcc build dir collect-ld.
* config/default.exp: Don't make tmpdir/gas. Put as symlink into
tmpdir/ld.
(gcc_gas_flag, gcc_ld_flag): Delete.
(gcc_B_opt, ld_L_opt): New globals.
ld-elf/shared.exp: Remove all refs to gcc_gas_flag and gcc_ld_flag.
ld-plugin/lto.exp: Likewise.
lib/ld-lib.exp (run_host_cmd): Add gcc_B_opt and ld_L_opt here.
(ld_simple_link): Remove -B handling now that this is done in
run_host_cmd. Simplify.
(default_ld_compile): Simplify.
(check_lto_available): Use run_host_cmd_yesno.
(check_lto_shared_available): Likewise.
libdummy.a is used to make run_cc_link_tests compile objects and
archive them. libdummy.a isn't used. What we're really doing is
preventing a final link. So do that directly.
* lib/ld-lib.exp (run_ld_link_tests): Stop after assembling objects
if binfile is empty.
(run_ld_link_exec_tests, run_cc_link_tests): Likewise. Tidy
status checks.
* ld-plugin/lto.exp: Don't use libdummy.a trick to compile objects.
Instead use an empty output file.
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all
binutils configure.in files. The BFD version is now in bfd/version.m4
rather than bfd/configure.in, which allows automake to automatically
track this dependency.
bfd/
* version.m4: New file.
* configure.in: Include version.m4.
(AC_INIT): Update.
* Makefile.am (RELEASE): Delete.
(bfdver.h): Depend on development.sh, use instead of RELEASE.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
binutils/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
When a shared library appears within --start-group/--end-group ld may
only discover a need for loading the library on the second or
subsequent pass over archive libraries, as more objects are extracted.
ld/
PR 17068
* ldlang.c (load_symbols): Always check flags.reload.
(open_input_bfds): Always reload --as-needed shared libraries,
not just when rescanning.
* ldlang.h (struct lang_input_statement_flags): Update reload comment.
* plugin.c (plugin_should_reload): Assume shared library arg.
* plugin.h (plugin_should_reload): Update comment.
ld/testsuite
* ld-elf/pr17068.s: New.
* ld-elf/pr17068a.s: New.
* ld-elf/pr17068b.s: New.
* ld-elf/pr17068c.s: New.
* ld-elf/pr17068d.s: New.
* ld-elf/pr17068e.s: New.
* ld-elf/pr17068ez.s: New.
* ld-elf/elf.exp: Run new test.
doesn't always mean you need to define a function symbol on plt code.
If all references are in read-write sections, then using dynamic relocs
is OK.
bfd/
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Clear
pointer_equality_needed when !readonly_dynrelocs.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Likewise.
ld/testsuite/
* ld-powerpc/ambiguousv1.d: Match symbol table too.
* ld-powerpc/ambiguousv2.d: Likewise.
* ld-powerpc/ambiguousv1b.d: New.
* ld-powerpc/ambiguousv2b.d: New.
* ld-powerpc/powerpc.exp: Run new tests.
The undefined function symbols (with non-zero value) on global entry
stubs are discarded by objdump when disassembling, so give objdump
another symbol to mark the stubs.
Also fixes a couple of bugs:
- entry_section was set to .opd for ELFv2, which meant a hard error
rather than a warning when _start wasn't defined.
- global entry stubs were not built if they were the only type of
stub in an executable.
bfd/
* elf64-ppc.c (ppc_stub_type): Add ppc_stub_global_entry.
(struct ppc_link_hash_table): Increase size of stub_count array.
(build_global_entry_stubs): Emit symbol on global entry stub.
(ppc64_elf_build_stubs): NULL check htab->brlt. Add global entry
stub stats.
ld/
* emultempl/ppc64elf.em (stub_added): Delete.
(gld${EMULATION_NAME}_finish): Call ppc64_elf_build_stubs even when
none of the usual stubs have been added. Only change entry_section
for ELFv1.
sys/param.h on recent versions of powerpc glibc ends up including
asm/elf.h via asm/sigcontex.h. asm/elf.h defines R_PPC_* and R_PPC64_*
macros, which clash with our include/elf/ppc.h and include/elf/ppc64.h.
It turns out that no current source uses LD_PATHMAX, so there is no
need for limits.h or sys/param.h, except for one occurrence of UINT_MAX.
I don't have a quarrel with limits.h, but it seems unnecessary just
for UINT_MAX.
* sysdep.h: Don't include limits.h and sys/param.h. Don't
include unistd.h twice.
(LD_PATHMAX): Don't define.
* ldlang.c (lang_common): Don't use UINT_MAX.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
inserted. This is for compatibility with other, non-GNU tools. Deterministic
binaries can still be created by using the new --no-insert-timestamp command line
option.
* emultempl/pe.em: Initialise insert_timestamp to true.
Add a --no-insert-timestamp command line option.
* emultempl/pep.em: Likewise.
* ld.texinfo: Document that --insert-timestamp is enabled by
default and that it now has an inverse command line option.
* NEWS: Mention the new behaviour.
* Makefile.am (ALL_EMULATION_SOURCES): Move ei386pep.c from
here...
(ALL_64_EMULATION_SOURCES): ... to here.
(ALL_EMUL_EXTRA_OFILES): Move pep-dll.o from here...
(ALL_64_EMUL_EXTRA_OFILES): New. ... to here.
* configure.in (EMUL_EXTRA_OFILES): Include
ALL_64_EMUL_EXTRA_OFILES when making a 64-bit enabled build.
* Makefile.in: Regenerate.
* configure: Regenerate.
Addition of DF_STATIC_TLS in eea6dad2 results in the addition of
flags to the dynamic section, which in turn changes these addresses.
Fix them up to match their new positions.
ld/testsuite/Changelog:
2014-06-24 Kyle McMartin <kyle@redhat.com>
* ld-arm/tls-gdierelax2.d: Fix expected offsets.
Combining TLS descriptors and GNU indirect functions in the same
object could lead to assertions or multiple dynamic relocations
for the same GOT slot. Fix the bookkeeping so this doesn't happen.
This allows building and make checking glibc with -mtls-dialect=gnu2.
bfd/ChangeLog:
2014-06-16 Will Newton <will.newton@linaro.org>
* elf32-arm.c (elf32_arm_allocate_plt_entry): Increment
htab->next_tls_desc_index in the non-IPLT case.
Calculate GOT offset correctly for the non-IPLT case.
(allocate_dynrelocs_for_symbol): Don't increment
htab->next_tls_desc_index here.
ld/testsuite/ChangeLog:
2014-06-16 Will Newton <will.newton@linaro.org>
* ld-arm/arm-elf.exp: Add ifunc-gdesc test.
* ld-arm/ifunc-gdesc.r: New file.
* ld-arm/ifunc-gdesc.s: Likewise.
* ld-arm/ifunc-gdesc.ver: Likewise.
and fix more nds32 dependencies.
* scripttempl/elf.sc: Edit out __rela_iplt symbol assignments from
.rel sections, and __rel_iplt from .rela sections.
* scripttempl/nds32elf.sc: Likewise.
* Makefile.am (ends32*.c): Depend on nds32elf.sc.
* Makefile.in: Regenerate.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
Power8 fuses addis,addi and addis,ld sequences when the target of the
addis is the same as the addi/ld. Thus
addis r12,r2,xxx@ha
addi r12,r12,xxx@l / ld r12,xxx@l(r12)
is faster than
addis r11,r2,xxx@ha
addi r12,r11,xxx@l / ld r12,xxx@l(r11)
So use the form that allows fusion in plt call and branch stubs.
bfd/
* elf64-ppc.c (ADDIS_R12_R2): Define.
(build_plt_stub): Support fusion on ELFv2 stub.
(ppc_build_one_stub): Likewise for plt branch stubs.
gold/
* powerpc.cc (addis_12_2): Define.
(Stub_table::do_write): Support fusion on ELFv2 stubs.
ld/testsuite/
* ld-powerpc/elfv2exe.d: Update for changed plt call stubs.
gdb/
* ppc64-tdep.c (ppc64_standard_linkage8): New.
(ppc64_skip_trampoline_code): Recognise ELFv2 stub supporting fusion.
Alan Modra
Ulrich Drepper
H.J. Lu
Kaz Kojima
Matthew Fortune
Anthony Green
Stefan Kristiansson
H.J. Lu
Jiong Wang
Max Filippov
Will Newton
Denis Chertykov
Nick Clifton
Barney Stratford
Linda Zhang
Kyle McMartin
Andreas Tobler
Ryan Mansfield
Joel Brobecker