* cli/cli-decode.c: New file. Handle lists of commands, their decoding
and documentation.
(add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd,
add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc,
add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd,
add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list,
help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1,
undef_cmd_error, lookup_cmd, deprecated_cmd_warning,
lookup_cmd_composition, complete_on_cmdlist, complete_on_enum):
Moved here from command.c.
(add_info, add_info_alias, add_com, add_com_alias): Moved here from
top.c.
* cli/cli-decode.h: Definitions/declarations for the above.
* cli/cli-cmds.c: New file. GDB CLI commands.
(error_no_arg, info_command, show_command, help_command, show_version,
quit_command, pwd_command, cd_command, echo_command, shell_escape,
make_command, show_user, set_debug, show_debug, init_cmd_lists):
Moved here from top.c.
(apropos_command): Moved here from command.c.
(complete_command, source_command): Moved here (part) from top.c.
(is_complete_command): New function. Checks if a command is the
"complete" command.
(init_cli_cmds): New function. Add commands to the CLI (from code
previously in top.c.
* cli/cli-cmds.h: Definitions/declarations for the above.
* cli/cli-script.c: New file. GDB CLI command scripting.
(build_command_line, get_command_line, print_command_lines,
print_command_line, execute_user_command, execute_control_command,
while_command, if_command, arg_cleanup, setup_user_args, locate_arg,
insert_args, realloc_body_list, read_next_line,
recurse_read_control_structure, read_command_lines, free_command_lines,
do_free_command_lines_cleanup, make_cleanup_free_command_lines,
validate_comname, user_defined_command, define_command,
document_command, source_cleanup_lines, do_fclose_cleanup,
show_user_1): Moved here from top.c.
(script_from_file): New function. Implements execution of a script
contained in a file (part of code for the source_command() that used
to exist in top.c).
* cli/cli-script.h: Definitions/declarations for the above.
* cli/cli-setshow.c: New file. Handle set and show GDB CLI commands.
(parse_auto_binary_operation, parse_binary_operation,
do_setshow_command, cmd_show_list): Moved here from command.c.
* cli/cli-setshow.h: Definitions/declarations for the above.
* top.c: Remove all CLI code, except the command loop.
(gdb_init): Call init_cli_cmds().
* command.c: Remove obsolete file.
* command.h: Mark as DEPRECATED.
* gdbcmd.h: Ditto.
* call-cmds.h: Ditto.
* Makefile.in (SFILES): Remove command.c.
(COMMON_OBS): Remove command.o.
(command.o): Remove obsolete target.
(cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros.
Refer to CLI header files.
(cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets.
(SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS,
SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN,
SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli
subdirectory.
* configure.in (enable_gdbcli): New option. Include the CLI in the
executable (cannot be disabled yet).
(CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS,
CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add
the corresponding SUBDIR_CLI_* macros if CLI requested.
* configure: Regenerate.
* linespec.h: New file. Declarations for linespec.c.
* linespec.c, alpha-tdep.c, breakpoint.c, parse.c, source.c,
symtab.c, tracepoint.c: Include the above.
* completer.c: New file. Line completion stuff for GDB.
(get_gdb_completer_word_break_characters,
get_gdb_completer_quote_characters): New functions. Accessors for
useful completer internal data.
(filename_completer, line_completion_function, skip_quoted): Moved
here from top.c.
* completer.h: New file. Declarations for the above.
* linespec.c (decode_line_1): Use
get_gdb_completer_word_break_characters and
get_gdb_completer_quote_characters.
* top.c: Include completer.h.
(filename_completer, line_completion_function, skip_quoted):
Moved to completer.c.
* corefile.c, exec.c, source.c, symfile.c, linespec.c: Include
completer.h.
* Makefile.in (SFILES): Add completer.c.
(COMMON_OBS): Add completer.o.
(completer.o): New target.
(linespec.o, alpha-tdep.o, breakpoint.o, parse.o, source.o,
symtab.o, tracepoint.o): Add linespec.h to dependencies list.
(corefile.o, exec.o, source.o, symfile.o, linespec.o): Add completer.h
to dependencies list.
* solist.h: Declare new function solib_open.
* solib.c (solib_open): New function. Abstracts some of the
code from solib_map_sections, for finding the binary solib file.
(solib_map_sections): Call solib_open.
* solib-svr4.c (enable_break): Call solib_open.
store_inferior_registers): Support older NetBSD/powerpc systems
from before fp reg support was added. Adapt to register number
changes caused when powerpc target was multi-arched.
to automatically dereference a function pointer for printing
if necessary.
(c_val_print): Use print_function_pointer_address when printing
function pointer addresses.
(sources_info): Replace use of no_symtab_msg with the string
itself.
* linespec.c (no_symtab_msg): Remove declaration.
(decode_line_1): Replace uses of no_symtab_msg with the string
itself.
* regcache.c (read_register_bytes): Failing to set register_valid
is not necessarily an error, if the register is a pseudo-register.
Some pseudo-registers are never marked as valid, so that they will
be read anew every time. Determining if a pseudo-register is valid
(or should be marked invalid) may be difficult, whereas just
recomputing it may be cheap.
step_over_calls.
* infcmd.c (step_over_calls): Change definition.
(step_1): Use new enum values in relation to step_over_calls.
(step_once): Ditto.
(until_next_command): Ditto.
* infrun.c (clear_proceed_status): Ditto.
(handle_inferior_event): Ditto.
* inferior.h (step_stop_if_no_debug): New variable.
* infrun.c (step_stop_if_no_debug): Declare.
(handle_inferior_event): Stop the step command if we entered a function without
line info.
(_initialize_infrun): New command 'set step-mode' to control the step command.
* infcmd.c (step_once): Switch to stepi mode if there is no line info
(and switching is enabled).
* target.c (do_xfer_memory): Only perform a single memory transfer
instead of iterating to tranfer the entire region. Higher layers
are expected to call this function multiple times for partial
transfers.
(target_xfer_memory_partial): Remove unused local variables.
2000-11-10 Nick Duffek <nsd@redhat.com>
* target.c (target_xfer_memory_partial): Return bytes transferred
instead of 0.
SOLIB_SYMBOLS_MANUAL code, cleanup of AIX shared library handling code.
* rs6000-nat.c (vmap_symtab): Do not try to modify offsets
if symbols are not yet loaded.
(vmap_add_symbols): New function to add symbols for a vmap entry.
(add_vmap): Turn errors into warnings, return NULL vmap upon
failure. Add symbols via vmap_add_symbols only if requested.
(xcoff_relocate_core): Allow debugging of core files without an
executable file. Handle NULL returns from add_vmap gracefully.
* xcoffsolib.c (solib_add): Remove, no longer needed.
(solib_info): Do not check for new shared libraries if there is no
inferior process.
(sharedlibrary_command): Made static.
Do not check for new shared libraries if there is no inferior process.
Add symbols for requested shared libraries via vmap_add_symbols.
(_initialize_solib): Add `set auto-solib-add' command.
* xcoffsolib.h (vmap_add_symbols): Add prototype declaration.
* config/rs6000/tm-rs6000.h (PC_LOAD_SEGMENT): Move from here ...
* config/rs6000/nm-rs6000.h: ... to here, this is an AIX native
feature.
* config/powerpc/tm-macos.h, config/powerpc/tm-ppc-eabi.h,
config/powerpc/tm-ppc-nw.h, config/rs6000/tm-rs6000ly.h:
Remove #undef PC_LOAD_SEGMENT.
* config/powerpc/aix.mt, config/rs6000/aix4.mt, config/rs6000/rs6000.mt
(TDEPFILES): Move xcoffsolib.o from here ...
* config/powerpc/aix.mh, config/rs6000/aix4.mh, config/rs6000/rs6000.mh
(NATDEPFILES): ... to here, xcoffsolib.o contains AIX native code
only.
* rs6000-tdep.c: Remove #include xcoffsolib.h, no longer needed.
* xcoffsolib.h (xcoff_relocate_symtab_hook): Remove declaration.
* rs6000-nat.c (_initialize_core_rs6000): Remove setting of
xcoff_relocate_symtab_hook, no longer needed.
* xcoffsolib.c (solib_info, sharedlibrary_command): Remove
xcoff_relocate_symtab_hook indirection, call xcoff_relocate_symtab
directly, as xcoffsolib.c is now compiled in native AIX configurations
only.
* Makefile.in: Update dependencies for rs6000-tdep.o, rs6000-nat.o
and xcoffsolib.o.
Fernando Nasser
Pierre Muller
Andrew Cagney
Mark Salter
Christopher Faylor
Nick Clifton
Stephane Carrez
Peter Schauer
Kevin Buettner
Michael Snyder
J.T. Conklin
H.J. Lu
Jeff Law
Jim Blandy
David Taylor
Daniel Berlin
Eli Zaretskii