The patch makes GDB do exec-file-mismatch validation by comparing
build IDs instead of the current method of comparing filenames.
Currently, the exec-file-mismatch feature simply compares filenames to
decide whether the exec file loaded in gdb and the exec file the
target reports is running match. This causes false positives when
remote debugging, because it'll often be the case that the paths in
the host and the target won't match. And of course misses the case of
the files having the same name but being actually different files
(e.g., different builds).
This also broke many testcases when running against gdbserver, causing
tests to be skipped like (here native-extended-gdbserver):
(gdb) run
Starting program: /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink-filelink
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink-filelink
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink"? (y or n) UNTESTED: gdb.base/argv0-symlink.exp: could not run to main
or to fail like (here native-gdbserver):
(gdb) spawn /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/../../gdbserver/gdbserver --once localhost:2346 /home/pedro/gdb/binutils-gdb/build/gdb/te
stsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x
Process /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x created; pid = 20040
Listening on port 2346
target remote localhost:2346
Remote debugging using localhost:2346
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/temp/19968/skip_btrace_tests-19968.x
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.btrace/buffer-size/skip_btrace_tests-19968.x"? (y or n) Quit
(gdb) UNSUPPORTED: gdb.btrace/buffer-size.exp: target does not support record-btrace
The former case is about GDB not realizing the two files are the same,
because one of the them is a symlink to the other. The latter case is
about GDB realizing that one file is a copy of the other.
Over the years, the toolchain has settled on build ID matching being
the canonical method to match core dumps to executables, and
executables with no debug info to their debug info.
This patch makes us use build IDs to match the running image of a
binary with its version loaded in gdb, which may or may not have debug
info. This is very much like the core dump/executable matching.
The change to gdb_bfd_open is necessary to get rid of the "transfers
from remote targets can be slow" warning when we open the remote file
to read its build ID:
(gdb) r
Starting program: /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/break/break
Reading /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink from remote target...
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
warning: Mismatch between current exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/break/break
and automatically determined exec-file /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink
exec-file-mismatch handling is currently "ask"
Load new symbol table from "/home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.base/argv0-symlink/argv0-symlink"? (y or n)
While trying this out, I was worried that bfd would read a lot of
stuff from the binary in order to extract the build ID, making it
potentially slow, but turns out we don't read all that much. Maybe a
couple hundred bytes, and most of it seemingly is the read-ahead
cache. So I'm not worried about that. Otherwise I'd consider whether
a new qXfer:buildid:read would be better. But I'm happy that we
seemingly don't need to worry about it.
gdb/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* NEWS (set exec-file-mismatch): Adjust entry.
* exec.c: Include "build-id.h".
(validate_exec_file): Try to match build IDs instead of filenames.
* gdb_bfd.c (struct gdb_bfd_open_closure): New.
(gdb_bfd_iovec_fileio_open): Adjust to use gdb_bfd_open_closure
and pass down 'warn_if_slow'.
(gdb_bfd_open): Add 'warn_if_slow' parameter. Use
gdb_bfd_open_closure to pass it down.
* gdb_bfd.h (gdb_bfd_open): Add 'warn_if_slow' parameter.
gdb/doc/ChangeLog:
2020-05-19 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Attach): Update exec-file-mismatch description to
mention build IDs.
(Separate Debug Files): Add "build id" anchor.
gdb/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Mention changes to help and apropos.
gdb/doc/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Help): Document the help and apropos changes.
(Aliases): Document new meaning of -a abbreviation flag.
Now that Python code can create TUI windows, it seemed appropriate to
allow Python commands to appear in the "TUI" help class. This patch
adds this capability.
gdb/ChangeLog
2020-04-28 Tom Tromey <tom@tromey.com>
* NEWS: Update.
* python/py-cmd.c (gdbpy_initialize_commands): Add COMMAND_TUI.
(cmdpy_init): Allow class_tui.
gdb/doc/ChangeLog
2020-04-28 Tom Tromey <tom@tromey.com>
* python.texi (Commands In Python): Document gdb.COMMAND_TUI.
This changes the gdb Python API to add support for dynamic types. In
particular, this adds an attribute to gdb.Type, and updates some
attributes to reflect dynamic sizes and field offsets.
There's still no way to get the dynamic type from one of its concrete
instances. This could perhaps be added if needed.
gdb/ChangeLog
2020-04-24 Tom Tromey <tromey@adacore.com>
PR python/23662:
* python/py-type.c (convert_field): Handle
FIELD_LOC_KIND_DWARF_BLOCK.
(typy_get_sizeof): Handle TYPE_HAS_DYNAMIC_LENGTH.
(typy_get_dynamic): Nw function.
(type_object_getset): Add "dynamic".
* NEWS: Add entry.
gdb/doc/ChangeLog
2020-04-24 Tom Tromey <tromey@adacore.com>
PR python/23662:
* python.texi (Types In Python): Document new features.
gdb/testsuite/ChangeLog
2020-04-24 Tom Tromey <tromey@adacore.com>
PR python/23662:
* gdb.ada/variant.exp: Add Python checks.
* gdb.rust/simple.exp: Add dynamic type checks.
Replace "the the" by "the".
gdb/ChangeLog:
2020-03-06 Tom de Vries <tdevries@suse.de>
* NEWS: Fix "the the".
* ctfread.c: Same.
gdb/doc/ChangeLog:
2020-03-06 Tom de Vries <tdevries@suse.de>
* gdb.texinfo: Fix "the the".
gdb/testsuite/ChangeLog:
2020-03-06 Tom de Vries <tdevries@suse.de>
* README: Fix "the the".
* gdb.base/dprintf.exp: Same.
This commit aims to give a cleaner mechanism by which the user can
prevent GDB from trying to load any previous command history.
Currently the user can change the path to the history file, either
using a command line flag, or by setting the GDBHISTFILE environment
variable, and if the path is set to a non-existent file, then
obviously GDB wont load any command history. However, this feels like
a bit of a bodge, I'd like to add an official mechanism by which we
can disable command history loading.
Why would we want to prevent command history loading? The specific
use case I have is GDB starting with a CWD that is a network mounted
directory, and there is no command history present. Still GDB will
access the network in order to check for the file. In my particular
use case I'm actually starting a large number of GDB instances in
parallel, all in the same network mounted directory, the large number
of network accesses looking for this file introduces a noticeable
delay at GDB startup.
The approach I'm proposing here is a slight adjustment to the current
rules for setting up the history filename. Currently, if a user does
this, they see an error:
(gdb) set history filename
Argument required (filename to set it to.).
However, if a user does this:
$ GDBHISTFILE= gdb --quiet
(gdb) set history save on
(gdb) q
warning: Could not rename -gdb18416~ to : No such file or directory
So, we already have a bug in this area. My plan is to allow the empty
filename to be accepted, and for this to mean, neither load, nor save
the command history.
This does mean that we now have two mechanisms to prevent saving the
command history:
(gdb) set history filename
or
(gdb) set history save off
But the only way to prevent loading the command history is to set the
filename to the empty string _before_ you get to a GDB prompt, either
using a command line option, or the environment variable.
I've updated some of the show commands, for example this session:
(gdb) set history filename
(gdb) show history filename
There is no filename currently set for recording the command history in.
(gdb) show history save
Saving of the history record on exit is off.
(gdb) set history save on
(gdb) show history save
Saving of the history is disabled due to the value of 'history filename'.
(gdb) set history filename /tmp/hist
(gdb) show history save
Saving of the history record on exit is on.
I've updated the manual, and added some tests.
gdb/ChangeLog:
* NEWS: Mention new behaviour of the history filename.
* top.c (write_history_p): Add comment.
(show_write_history_p): Add header comment, give a different
message when history writing is on, but the history filename is
empty.
(history_filename): Add comment.
(history_filename_empty): New function.
(show_history_filename): Add header comment, give a different
message when the filename is empty.
(init_history): Compare history_filename against nullptr, and only
read history if the filename is not empty.
(set_history_filename): Add header comment, and only make
non-empty filenames absolute.
(init_main): Make the filename argument to 'set history filename'
optional.
gdb/doc/ChangeLog:
* gdb.texinfo (Command History): Extend description for
GDBHISTFILE and GDBHISTSIZE, add detail about the filename for
'set history filename' being optional. Describe the effect of an
empty history filename on 'set history save on'.
gdb/testsuite/ChangeLog:
* gdb.base/default.exp: Remove test of 'set history filename'.
* gdb.base/gdbinit-history.exp: Add tests for setting the history
filename to the empty string.
* lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE
and GDBHISTSIZE.
Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
debuginfod is a lightweight web service that indexes ELF/DWARF debugging
resources by build-id and serves them over HTTP.
This patch enables GDB to query debuginfod servers for separate debug
files and source code when it is otherwise not able to find them.
GDB can be built with debuginfod using the --with-debuginfod configure
option.
This requires that libdebuginfod be installed and found at configure time.
debuginfod is packaged with elfutils, starting with version 0.178.
For more information see https://sourceware.org/elfutils/.
Tested on x86_64 Fedora 31.
gdb/ChangeLog:
2020-02-26 Aaron Merey <amerey@redhat.com>
* Makefile.in: Handle optional debuginfod support.
* NEWS: Update.
* README: Add --with-debuginfod summary.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Handle optional debuginfod support.
* debuginfod-support.c: debuginfod helper functions.
* debuginfod-support.h: Ditto.
* doc/gdb.texinfo: Add --with-debuginfod to configure options
summary.
* dwarf2/read.c (dwarf2_get_dwz_file): Query debuginfod servers
when a dwz file cannot be found.
* elfread.c (elf_symfile_read): Query debuginfod servers when a
debuginfo file cannot be found.
* source.c (open_source_file): Query debuginfod servers when a
source file cannot be found.
* top.c (print_gdb_configuration): Include
--{with,without}-debuginfod in the output.
gdb/testsuite/ChangeLog:
2020-02-26 Aaron Merey <amerey@redhat.com>
* gdb.debuginfod: New directory for debuginfod tests.
* gdb.debuginfod/main.c: New test file.
* gdb.debuginfod/fetch_src_and_symbols.exp: New tests.
This patch adds support for writing new TUI windows in Python.
2020-02-22 Tom Tromey <tom@tromey.com>
* NEWS: Add entry for gdb.register_window_type.
* tui/tui-layout.h (window_factory): New typedef.
(tui_register_window): Declare.
* tui/tui-layout.c (saved_tui_windows): New global.
(tui_apply_current_layout): Use it.
(tui_register_window): New function.
* python/python.c (do_start_initialization): Call
gdbpy_initialize_tui.
(python_GdbMethods): Add "register_window_type" function.
* python/python-internal.h (gdbpy_register_tui_window)
(gdbpy_initialize_tui): Declare.
* python/py-tui.c: New file.
* Makefile.in (SUBDIR_PYTHON_SRCS): Add py-tui.c.
gdb/doc/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* python.texi (Python API): Add menu item.
(TUI Windows In Python): New node.
gdb/testsuite/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* gdb.python/tui-window.exp: New file.
* gdb.python/tui-window.py: New file.
Change-Id: I85fbfb923a1840450a00a7dce113a05d7f048baa
This changes the TUI layout engine to add horizontal splitting. Now,
windows can be side-by-side.
A horizontal split is defined using the "-horizontal" parameter to
"tui new-layout".
This also adds the first "winheight" test to the test suite. One open
question is whether we want a new "winwidth" command, now that
horizontal layouts are possible. This is easily done using the
generic layout code.
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
PR tui/17850:
* tui/tui-win.c (tui_gen_win_info::max_width): New method.
* tui/tui-layout.h (class tui_layout_base) <get_sizes>: Add
"height" argument.
(class tui_layout_window) <get_sizes>: Likewise.
(class tui_layout_split) <tui_layout_split>: Add "vertical"
argument.
<get_sizes>: Add "height" argument.
<m_vertical>: New field.
* tui/tui-layout.c (tui_layout_split::clone): Update.
(tui_layout_split::get_sizes): Add "height" argument.
(tui_layout_split::adjust_size, tui_layout_split::apply): Update.
(tui_new_layout_command): Parse "-horizontal".
(_initialize_tui_layout): Update help string.
(tui_layout_split::specification): Add "-horizontal" when needed.
* tui/tui-layout.c (tui_layout_window::get_sizes): Add "height"
argument.
* tui/tui-data.h (struct tui_gen_win_info) <max_width, min_width>:
New methods.
gdb/doc/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
PR tui/17850:
* gdb.texinfo (TUI Commands): Document horizontal layouts.
gdb/testsuite/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
PR tui/17850:
* gdb.tui/new-layout.exp: Add horizontal layout and winheight
tests.
Change-Id: I38b35e504f34698578af86686be03c0fefd954ae
This adds a new command, "tui new-layout". This command can be used
to define a new TUI window layout.
The command is used like:
(gdb) tui new-layout name src 1 regs 1 status 0 cmd 1
The first argument is the name of the layout. In this example, it is
"name", so the new layout could be seen by "layout name".
Subsequent arguments come in pairs, where the first item in a pair is
the name of a window, and the second item in a pair is the window's
weight. A weight is just an integer -- a window's allocated size is
proportional to the total of the weights given. So, in the above
example, all windows will have the same size (the status windows's
weight does not matter, because it has fixed height).
gdb/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* NEWS: Add "tui new-layout" item.
* tui/tui-layout.c (add_layout_command): Return cmd_list_element.
Add new-layout command to help text.
(validate_window_name): New function.
(tui_new_layout_command): New function.
(_initialize_tui_layout): Register "new-layout".
(tui_layout_window::specification): New method.
(tui_layout_window::specification): New method.
* tui/tui-layout.h (class tui_layout_base) <specification>: New
method.
(class tui_layout_window) <specification>: New method.
(class tui_layout_split) <specification>: New method.
gdb/doc/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* gdb.texinfo (TUI Overview): Mention user layouts.
(TUI Commands): Document "tui new-layout".
gdb/testsuite/ChangeLog
2020-02-22 Tom Tromey <tom@tromey.com>
* gdb.tui/new-layout.exp: New file.
Change-Id: Id7c3ace20ab1e8924f8f4ad788f40210f58a5c05
Implement RISC-V/Linux support for both RV64 and RV32 systems, including
XML target description handling based on features determined, GPR and
FPR regset support including dynamic sizing of the latter, and software
breakpoint handling. Define two NT_FPREGSET regsets of a different size
matching the FPR sizes supported for generic `gdbserver' code to pick
from according to what the OS supplies.
Also handle a glibc bug where ELF_NFPREG is defined in terms of NFPREG,
however NFPREG is nowhere defined.
2020-02-19 Maciej W. Rozycki <macro@wdc.com>
Andrew Burgess <andrew.burgess@embecosm.com>
gdb/
* NEWS: Mention RISC-V GNU/Linux GDBserver support.
gdbserver/
* linux-riscv-low.cc: New file.
* Makefile.in (SFILES): Add linux-riscv-low.cc, arch/riscv.c,
and nat/riscv-linux-tdesc.c.
* configure.srv <riscv*-*-linux*> (srv_tgtobj)
(srv_linux_regsets, srv_linux_usrregs, srv_linux_thread_db):
Define.
Mention in NEWS the new option and the set/show commands.
Document in gdb.texinfo the new option and the set/show commands.
gdb/ChangeLog
2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Mention the new option and the set/show commands.
gdb/doc/ChangeLog
2020-01-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Attach): Document the new option and the
set/show commands.
(Connecting): Reference the exec-file-mismatch option.
This commit documents the new multi-target features in both NEWS and
user manual.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* NEWS: Mention multi-target debugging, "info connections", and
"add-inferior -no-connection".
gdb/doc/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Say "current inferior not connected"
instead of "GDB not connected".
(Inferiors and Programs): Rename node to ...
(Inferiors Connections and Programs): ... this. Update all
references. Talk about multiple target connections. Update "info
inferiors" info to mention the connections column. Describe "info
connections". Document "add-inferior -no-connection".
* guile.texi, python.texi: Update cross references.
Now that we enabled it by default, this change adds a NEWS entry for it.
gdb/ChangeLog:
2019-12-26 Christian Biesinger <cbiesinger@google.com>
* NEWS: Mention that multithreaded symbol loading is now on by
default.
Change-Id: Ic344596a3b1b6e612a0071a50df49588b833c15d
The option framework documentation was speaking about a 'print -raw'
option, but this option does not exist.
This patch implements -raw-values option that tells to ignore the
active pretty printers when printing a value.
As we already have -raw-frame-arguments, I thought -raw-values
was more clear, in particular to differentiate
set print raw-values and set print raw-frame-arguments.
gdb/doc/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Command Options): Use -p and -pretty in the example,
as -r is ambiguous. Update the print - TAB TAB completion result.
(Data): Document new option -raw-values. Use -p and -pretty in the
example, as -r is ambiguous.
(Print Settings): Document set print raw values.
(Pretty-Printer Commands): Document interaction between enabled
pretty printers and -raw-values/-raw-frame-arguments.
gdb/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Document -raw-values option and the related setting commands.
* printcmd.c (print_command_parse_format): Do not set opts->raw off,
only set it on when /r is given.
* valprint.c (value_print_option_defs): New element raw-values.
* Makefile.in: Add the new file.
gdb/testsuite/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/options.exp: Add -raw-values in the print completion list.
* gdb.python/py-prettyprint.exp: Add tests for -raw-values.
Two new MI command -symbol-info-module-variables and
-symbol-info-module-functions, which are the equivalent of the CLI
command 'info module variables' and 'info module functions'. These
return information about functions and variables within Fortran
modules.
gdb/ChangeLog:
* mi/mi-cmds.c (mi_cmds): Add -symbol-info-module-functions and
-symbol-info-module-variables entries.
* mi/mi-cmds.h (mi_cmd_symbol_info_module_functions): Declare.
(mi_cmd_symbol_info_module_variables): Declare.
* mi/mi-symbol-cmds.c
(module_symbol_search_iterator): New typedef.
(output_module_symbols_in_single_module_and_file): New function.
(output_module_symbols_in_single_module): New function.
(mi_info_module_functions_or_variables): New function.
(mi_cmd_symbol_info_module_functions): New function.
(mi_cmd_symbol_info_module_variables): New function.
* NEWS: Mention new MI command.
gdb/doc/ChangeLog:
* doc/gdb.texinfo (GDB/MI Symbol Query): Document new MI command
-symbol-info-module-functions and -symbol-info-module-variables.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-fortran-modules.exp: Add additional tests for
-symbol-info-module-functions and -symbol-info-module-variables.
Change-Id: Ic96f12dd14bd7e34774c3cde008fec30a4055bfe
This adds the ability to change the color of the TUI borders, both
ordinary and active. Unlike other styling options, this doesn't allow
setting the intensity, because that is already done by the TUI in a
different way.
gdb/ChangeLog
2019-12-01 Tom Tromey <tom@tromey.com>
* NEWS: Document new settings.
* tui/tui-wingeneral.c (box_win): Apply appropriate border style.
* tui/tui-win.c (_initialize_tui_win): Add border style
observers.
* tui/tui-io.h (tui_apply_style): Declare.
* tui/tui-io.c (tui_apply_style): Rename from apply_style. No
longer static.
(apply_ansi_escape, tui_set_reverse_mode): Update.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Add "skip_intensity" parameter.
<changed>: New member.
<do_set_value>: Declare.
(tui_border_style, tui_active_border_style): Declare.
* cli/cli-style.c (tui_border_style, tui_active_border_style): New
globals.
(cli_style_option): Initialize "changed".
(cli_style_option::do_set_value): New function.
(cli_style_option::add_setshow_commands): Add "skip_intensity"
parameter. Update.
(STYLE_ADD_SETSHOW_COMMANDS): Add "SKIP" parameter.
(_initialize_cli_style): Update. Create TUI border style
commands.
gdb/doc/ChangeLog
2019-12-01 Tom Tromey <tom@tromey.com>
* gdb.texinfo (TUI Configuration): Mention TUI border styles.
(Output Styling): Document new settings.
Change-Id: Id13e2af0af2a0bde61282752f2c379db3220c9fc
The source window currently uses a field width of 6 for line numbers,
and it further aligns to the next tab stop. This seemed a bit
wasteful of horizontal space to me, so I changed that in an earlier
patch.
However, that change wasn't universally popular. This patch instead
adds the option to use less horizontal space in the TUI source window.
gdb/ChangeLog
2019-12-01 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.h (tui_copy_source_line): Add "ndigits"
parameter.
* tui/tui-winsource.c (tui_copy_source_line): Add "ndigits"
parameter.
* tui/tui-win.h (compact_source): Declare.
* tui/tui-win.c (compact_source): New global.
(tui_set_compact_source, tui_show_compact_source): New functions.
(_initialize_tui_win): Add "compact-source" setting.
* tui/tui-source.c (tui_source_window::set_contents): Handle
compact_source setting.
* tui/tui-disasm.c (tui_disasm_window::set_contents): Update.
* NEWS: Document new setting.
gdb/doc/ChangeLog
2019-12-01 Tom Tromey <tom@tromey.com>
* gdb.texinfo (TUI Configuration): Document new setting.
Change-Id: I46ce9a68b12c9c79332d510f9c14b3c84b7efadd
gdb/ChangeLog
2019-11-30 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Mention define-prefix. Tell that command names can now
contain a . character.
gdb/doc/ChangeLog
2019-11-30 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Define): Indicate that user-defined prefix can
be used in 'define' command. Document 'define-prefix' command.
Just to let people know that this is available and how to use it.
Also updates the description of the setting to say the default is 0.
gdb/ChangeLog:
2019-11-26 Christian Biesinger <cbiesinger@google.com>
* NEWS: Mention the new multithreaded symbol loading.
Change-Id: I263add6aae03b523f0870ad4d1e972eada4b382a
Add '-symbol-info-modules', an MI version of the CLI 'info modules'
command.
gdb/ChangeLog:
* mi/mi-cmds.c (mi_cmds): Add 'symbol-info-modules' entry.
* mi/mi-cmds.h (mi_cmd_symbol_info_modules): Declare.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_info_modules): New function.
* NEWS: Mention new MI command.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-fortran-modules-2.f90: New file.
* gdb.mi/mi-fortran-modules.exp: New file.
* gdb.mi/mi-fortran-modules.f90: New file.
gdb/doc/ChangeLog:
* doc/gdb.texinfo (GDB/MI Symbol Query): Document new MI command
-symbol-info-modules.
Change-Id: Ibc618010d1d5f36ae8a8baba4fb9d9d724e62b0f
Add new MI commands -symbol-info-functions, -symbol-info-variables,
and -symbol-info-types which correspond to the CLI commands 'info
functions', 'info variables', and 'info types' respectively.
gdb/ChangeLog:
* mi/mi-cmds.c (mi_cmds): Add '-symbol-info-functions',
'-symbol-info-types', and '-symbol-info-variables'.
* mi/mi-cmds.h (mi_cmd_symbol_info_functions): Declare.
(mi_cmd_symbol_info_types): Declare.
(mi_cmd_symbol_info_variables): Declare.
* mi/mi-symbol-cmds.c: Add 'source.h' and 'mi-getopt.h' includes.
(output_debug_symbol): New function.
(output_nondebug_symbol): New function.
(mi_symbol_info): New function.
(mi_info_functions_or_variables): New function.
(mi_cmd_symbol_info_functions): New function.
(mi_cmd_symbol_info_types): New function.
(mi_cmd_symbol_info_variables): New function.
* NEWS: Mention new commands.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-sym-info-1.c: New file.
* gdb.mi/mi-sym-info-2.c: New file.
* gdb.mi/mi-sym-info.exp: New file.
gdb/doc/ChangeLog:
* doc/gdb.texinfo (GDB/MI Symbol Query): Document new MI command
-symbol-info-functions, -symbol-info-types, and
-symbol-info-variables.
Change-Id: Ic2fc6a6750bbce91cdde2344791014e5ef45642d
This adds maint commands to control the number of worker threads that
gdb can use.
2019-11-26 Tom Tromey <tom@tromey.com>
* NEWS: Add entry.
* maint.c (_initialize_maint_cmds): Add "worker-threads" maint
commands. Call update_thread_pool_size.
(update_thread_pool_size, maintenance_set_worker_threads): New
functions.
(n_worker_threads): New global.
gdb/doc/ChangeLog
2019-11-26 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document new maint
commands.
Change-Id: I4fb514faa05879d8afe62c77036a4469d57dca2a
While debugging, i felt the need to adjust the truncation length of remote
packets so i could see more or less data as needed. The default is currently
set to 512 bytes.
This patch makes this option adjustable through the new "set debug
remote-packet-max-chars" command. It can be set to unlimited if we want to
completely disable truncation.
Update on v5:
- Adjusted function and variable documentation, NEWS entry and GDB manual.
gdb/ChangeLog:
2019-11-25 Luis Machado <luis.machado@linaro.org>
* NEWS (New Commands): Mention "set debug remote-packet-max-chars".
* remote.c (REMOTE_DEBUG_MAX_CHAR): Remove.
(remote_packet_max_chars): New static global.
(show_remote_packet_max_chars): New function.
(remote_target::putpkt_binary): Adjust to use new
remote_packet_max_chars option.
(remote_target::getpkt_or_notif_sane_1): Likewise.
(_initialize_remote): Register new remote-packet-max-chars option.
gdb/doc/ChangeLog:
2019-11-25 Luis Machado <luis.machado@linaro.org>
* gdb.texinfo (Debugging Output): Document set debug
remote-packet-max-chars.
Change-Id: I2e871b37bfcaa6376537c3fe3db8f016dd806a7c
As Sergio pointed out, the TUI resizing tests are flaky. Debugging
this showed three main problems.
1. expect's "stty" command processes its arguments one-by-one. So,
rather than requesting a single resize, it sends two separate resize
requests (one for rows and one for columns). This means gdb sees two
SIGWINCH signals and resizes the terminal twice.
I consider this a bug in expect, but I couldn't readily see how to
report a bug; and anyway the fix wouldn't propagate very quickly.
This patch works around this problem by explicitly doing two separate
resizes (so it will be robust if expect ever does change); and then by
waiting for each resize to complete before continuing.
2. gdb uses curses to drive the console rendering. Currently the test
suite looks for terminal text insertion sequences to decide when a
command has completed. However, it turns out that, sometimes, curses
can output things in non-obvious ways. I didn't debug into curses but
I guess this can happen due to output optimizations. No matter the
reason, sometimes the current approach of only tracking text
insertions is not enough to detect that gdb has finished rendering.
This patch fixes this problem by arranging to detect the termination
output after any curses command, not just insertion.
3. Detecting when a resize has completed is tricky. In fact, I could
not find a way to reliably do this.
This patch fixes this problem by adding a special maint
"tui-resize-message" setting to gdb. When this is enabled, gdb will
print a message after each SIGWINCH has been fully processed. The
test suite enables this mode and then waits for the message in order
to know when control can be returned to the calling test.
This patch also adds a timeout, to avoid the situation where the
terminal code fails to notice a change for some reason. This lets the
test at least try to continue.
gdb/ChangeLog
2019-11-12 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (resize_message): New global.
(show_tui_resize_message): New function.
(tui_async_resize_screen): Print message if requested.
(_initialize_tui_win): Add tui-resize-message setting.
* NEWS: Add entry for new commands.
gdb/doc/ChangeLog
2019-11-12 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document new command.
gdb/testsuite/ChangeLog
2019-11-12 Tom Tromey <tom@tromey.com>
* lib/tuiterm.exp (_accept): Add wait_for parameter. Check output
after any command. Expect prompt after WAIT_FOR is seen.
(enter_tui): Enable resize messages.
(command): Expect command in output.
(get_line): Avoid error when cursor appears to be off-screen.
(dump_screen): Include screen size in title.
(_do_resize): New proc, from "resize".
(resize): Rewrite. Do resize in two steps.
* gdb.tui/empty.exp (layouts): Fix entries.
(check_boxes): Remove xfail.
(check_text): Dump screen on failure.
Change-Id: I420e0259cb99b21adcd28f671b99161eefa7a51d
If gdb.lookup_static_symbol is going to return a single symbol then it
makes sense (I think) for it to return a context sensitive choice of
symbol, that is the global static symbol that would be visible to the
program at that point.
However, if the user of the python API wants to instead get a
consistent set of global static symbols, no matter where they stop,
then they have to instead consider all global static symbols with a
given name - there could be many. That is what this new API function
offers, it returns a list (possibly empty) of all global static
symbols matching a given name (and optionally a given symbol domain).
gdb/ChangeLog:
* python/py-symbol.c (gdbpy_lookup_static_symbols): New
function.
* python/python-internal.h (gdbpy_lookup_static_symbols):
Declare new function.
* python/python.c (python_GdbMethods): Add
gdb.lookup_static_symbols method.
* NEWS: Mention gdb.lookup_static_symbols.
gdb/testsuite/ChangeLog:
* gdb.python/py-symbol.exp: Add test for
gdb.lookup_static_symbols.
gdb/doc/ChangeLog:
* python.texi (Symbols In Python): Add documentation for
gdb.lookup_static_symbols.
Change-Id: I1153b0ae5bcbc43b3dcf139043c7a48bf791e1a3
Here's the patch corresponding to the Solaris 10 obsoletion announcement
https://sourceware.org/ml/gdb/2019-10/msg00008.html
Right now it doesn't remove any code, but obviates the need to test on
that ancient platform. Besides, some of the patches I have in my queue
would require different solutions for Solaris 10 and 11.
There are a few comment-only references that I've kept since they are
still correct as is, even when GDB doesn't support Solaris 10 any
longer. The only code fragment I've left in is support for
/proc/<pid/path/a.out in procfs.c (procfs_target::pid_to_exec_file):
while current Solaris 11 updates provide /proc/<pid>/execname, that
wasn't present in Solaris 11.0 and still isn't in current Illumos and I
didn't want to make live harder for them.
Tested on i386-pc-solaris2.10 (obsolete configuration rejected) and
x86_64-pc-linux-gnu x sparc64-solaris2.10 (likewise)
resp. x86_64-pc-linux-gnu x sparcv9-solaris2.11 (still builds; I'm using
the sparcv9 form for 64-bit SPARC customary on Solaris in the
MAINTAINERS file now).
* NEWS (Changes since GDB 8.3): Document Solaris 10 removal.
* configure.host: Mark *-*-solaris2.10* obsolete.
* configure.tgt: Mark Solaris < 11 obsolete.
* MAINTAINERS (Target Instruction Set Architectures) <sparc>:
Update target triplet.
This patch adds two new commands "info module functions" and "info
module variables". These commands list all of the functions and
variables grouped by module and then by file.
For example:
(gdb) info module functions
All functions in all modules:
Module "mod1":
File /some/path/gdb/testsuite/gdb.fortran/info-types.f90:
35: void mod1::__copy_mod1_M1t1(Type m1t1, Type m1t1);
25: void mod1::sub_m1_a(integer(kind=4));
31: integer(kind=4) mod1::sub_m1_b(void);
Module "mod2":
File /some/path/gdb/testsuite/gdb.fortran/info-types.f90:
41: void mod2::sub_m2_a(integer(kind=4), logical(kind=4));
49: logical(kind=4) mod2::sub_m2_b(real(kind=4));
The new commands take set of flags that allow the output to be
filtered, the user can filter by variable/function name, type, or
containing module.
As GDB doesn't currently track the relationship between a module and
the variables or functions within it in the symbol table, so I filter
based on the module prefix in order to find the functions or variables
in each module. What this makes clear is that a user could get this
same information using "info variables" and simply provide the prefix
themselves, for example:
(gdb) info module functions -m mod1 _a
All functions matching regular expression "_a",
in all modules matching regular expression "mod1":
Module "mod1":
File /some/path/gdb/testsuite/gdb.fortran/info-types.f90:
25: void mod1::sub_m1_a(integer(kind=4));
Is similar to:
(gdb) info functions mod1::.*_a.*
All functions matching regular expression "mod1::.*_a":
File /some/path/gdb/testsuite/gdb.fortran/info-types.f90:
25: void mod1::sub_m1_a(integer(kind=4));
The benefits I see for a separate command are that the user doesn't
have to think (or know) about the module prefix format, nor worry
about building a proper regexp. The user can also easily scan across
modules without having to build complex regexps.
The new function search_module_symbols is extern in this patch despite
only being used within symtab.c, this is because a later patch in this
series will also be using this function from outside symtab.c.
This patch is a new implementation of an idea originally worked on by
Mark O'Connor, Chris January, David Lecomber, and Xavier Oro from ARM.
gdb/ChangeLog:
* symtab.c (info_module_cmdlist): New variable.
(info_module_command): New function.
(search_module_symbols): New function.
(info_module_subcommand): New function.
(struct info_modules_var_func_options): New struct.
(info_modules_var_func_options_defs): New variable.
(make_info_modules_var_func_options_def_group): New function.
(info_module_functions_command): New function.
(info_module_variables_command): New function.
(info_module_var_func_command_completer): New function.
(_initialize_symtab): Register new 'info module functions' and
'info module variables' commands.
* symtab.h (typedef symbol_search_in_module): New typedef.
(search_module_symbols): Declare new function.
* NEWS: Mention new commands.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new 'info module variables' and
'info module functions' commands.
gdb/testsuite/ChangeLog:
* gdb.fortran/info-modules.exp: Update expected results, and add
additional tests for 'info module functinos', and 'info module
variables'.
* gdb.fortran/info-types.exp: Update expected results.
* gdb.fortran/info-types.f90: Extend testcase with additional
module variables and functions.
Change-Id: I8c2960640e2e101b77eff54027d687e21ec22e2b
Add a new command 'info modules' that lists all of the modules GDB
knows about from the debug information.
A module is a debugging entity in the DWARF defined with
DW_TAG_module, currently Fortran is known to use this tag for its
modules. I'm not aware of any other language that currently makes use
of DW_TAG_module.
The output style is similar to the 'info type' output:
(gdb) info modules
All defined modules:
File info-types.f90:
16: mod1
24: mod2
(gdb)
Where the user is told the file the module is defined in and, on the
left hand side, the line number at which the module is defined along
with the name of the module.
This patch is a new implementation of an idea originally worked on by
Mark O'Connor, Chris January, David Lecomber, and Xavier Oro from ARM.
gdb/ChangeLog:
* dwarf2read.c (dw2_symtab_iter_next): Handle MODULE_DOMAIN.
(dw2_expand_marked_cus): Handle MODULES_DOMAIN.
(dw2_debug_names_iterator::next): Handle MODULE_DOMAIN and
MODULES_DOMAIN.
(scan_partial_symbols): Only create partial module symbols for non
declarations.
* psymtab.c (recursively_search_psymtabs): Handle MODULE_DOMAIN
and MODULES_DOMAIN.
* symtab.c (search_domain_name): Likewise.
(search_symbols): Likewise.
(print_symbol_info): Likewise.
(symtab_symbol_info): Likewise.
(info_modules_command): New function.
(_initialize_symtab): Register 'info modules' command.
* symtab.h (enum search_domain): Add MODULES_DOMAIN.
* NEWS: Mention new 'info modules' command.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new 'info modules' command.
gdb/testsuite/ChangeLog:
* gdb.fortran/info-modules.exp: New file.
* gdb.fortran/info-types.exp: Build with new file.
* gdb.fortran/info-types.f90: Include and use new module.
* gdb.fortran/info-types-2.f90: New file.
Change-Id: I2b781dd5a06bcad04620ccdc45f01a0f711adfad
Adds a configure option --with-system-gdbinit-dir to specify a directory
in which to look for gdbinit files. All files in this directory are
loaded on startup (subject to -n/-nx as usual) as long as the extension
matches a known and enabled scripting language (.gdb/.py/.scm).
This also changes get_ext_lang_of_file to support ".gdb" files, similar
to get_ext_lang_defn's handling of EXT_LANG_GDB.
gdb/ChangeLog:
2019-10-29 Christian Biesinger <cbiesinger@google.com>
* NEWS: Mention new --with-system-gdbinit-dir option.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Add new option --with-system-gdbinit-dir.
* extension.c (get_ext_lang_of_file): Return extension_language_gdb
for a ".gdb" suffix.
* main.c (get_init_files): Change system_gdbinit argument to
a vector and return the files in SYSTEM_GDBINIT_DIR in
addition to SYSTEM_GDBINIT.
(captured_main_1): Update.
(print_gdb_help): Update.
* top.c (print_gdb_configuration): Also print the value of
SYSTEM_GDBINIT_DIR.
gdb/doc/ChangeLog:
2019-10-29 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Also set SYSTEM_GDBINIT_DIR for the info manual
generation.
* gdb.texinfo (many sections): Document new --with-system-gdbinit-dir
option.
Change-Id: If233859ecc21bc6421d589b37cd658a3c7d030f2
This commit allows symbol matching within Fortran code without having
to specify all of the symbol's scope. For example, given this Fortran
code:
module aaa
contains
subroutine foo
print *, "hello."
end subroutine foo
end module aaa
subroutine foo
print *, "hello."
end subroutine foo
program test
call foo
contains
subroutine foo
print *, "hello."
end subroutine foo
subroutine bar
use aaa
call foo
end subroutine bar
end program test
The user can now do this:
(gdb) b foo
Breakpoint 1 at 0x4006c2: foo. (3 locations)
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
1.1 y 0x00000000004006c2 in aaa::foo at nest.f90:4
1.2 y 0x0000000000400730 in foo at nest.f90:9
1.3 y 0x00000000004007c3 in test::foo at nest.f90:16
The user asks for a breakpoint on 'foo' and is given a breakpoint on
all three possible 'foo' locations. The user is, of course, still
able to specify the scope in order to place a single breakpoint on
just one of the foo functions (or use 'break -qualified foo' to break
on just the global foo).
gdb/ChangeLog:
* f-lang.c (f_language_defn): Use cp_get_symbol_name_matcher and
cp_search_name_hash.
* NEWS: Add entry about nested function support.
gdb/testsuite/ChangeLog:
* gdb.fortran/nested-funcs-2.exp: Run tests with and without the
nested function prefix.
This adds the $_ada_exception convenience variable. It is set by the
Ada exception catchpoints, and holds the address of the exception
currently being thrown. This is useful because it allows more
fine-grained filtering of exceptions than is possible using the
existing "catch" syntax.
This also simplifies Ada catchpoints somewhat; because the catchpoint
must now carry the "kind", it's possible to remove many helper
functions.
gdb/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* NEWS: Add $_ada_exception entry.
* ada-lang.c (struct ada_catchpoint): Add constructor.
<m_kind>: New member.
(allocate_location_exception, re_set_exception): Remove
"ex" parameter.
(should_stop_exception): Compute $_ada_exception.
(check_status_exception, print_it_exception)
(print_one_exception, print_mention_exception): Remove
"ex" parameter.
(allocate_location_catch_exception, re_set_catch_exception)
(check_status_exception, print_it_catch_exception)
(print_one_catch_exception, print_mention_catch_exception)
(print_recreate_catch_exception)
(allocate_location_catch_exception_unhandled)
(re_set_catch_exception_unhandled)
(check_status_exception, print_it_catch_exception_unhandled)
(print_one_catch_exception_unhandled)
(print_mention_catch_exception_unhandled)
(print_recreate_catch_exception_unhandled)
(allocate_location_catch_assert, re_set_catch_assert)
(check_status_assert, print_it_catch_assert)
(print_one_catch_assert, print_mention_catch_assert)
(print_recreate_catch_assert)
(allocate_location_catch_handlers, re_set_catch_handlers)
(check_status_handlers, print_it_catch_handlers)
(print_one_catch_handlers, print_mention_catch_handlers)
(print_recreate_catch_handlers): Remove.
(create_ada_exception_catchpoint): Update.
(initialize_ada_catchpoint_ops): Update.
gdb/doc/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* gdb.texinfo (Set Catchpoints, Convenience Vars): Document
$_ada_exception.
gdb/testsuite/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* gdb.ada/catch_ex_std.exp: Add $_ada_exception test.
This is a followup on the following commit...
commit b4be1b0648
Date: Wed Mar 13 15:13:03 2019 -0400
Subject: Fix MI output for multi-location breakpoints
... which mistakenly added NEWS entries in the "in gdb-8.3" section,
rather than in the "since gdb-8.3" one.
gdb/ChangeLog:
* NEWS: Move entries about default MI version now being
version 3, and about the GDB/MI fix for multi-location
breakpoints to the "since GDB 8.3" section.
The TUI window-related commands like "focus" are case insensitive.
This is not the norm in gdb, and I don't see a good reason to have it
here. This patch changes the TUI to be case sensitive, like the rest
of gdb.
gdb/ChangeLog
2019-09-20 Tom Tromey <tom@tromey.com>
* NEWS: Mention case-sensitivity of TUI commands.
* tui/tui-win.c (tui_set_focus_command): Now case-sensitive.
(tui_set_win_height_command, parse_scrolling_args): Likewise.
* tui/tui-layout.c (tui_layout_command): Now case-sensitive.
Readline 8.0 has a feature that lets an application name a keymap.
This in turn makes it simpler for users to bind keys in keymaps in
their .inputrc.
This patch gives a name to the TUI SingleKey keymap, so that
additional bindings can be made there. For example:
$if gdb
set keymap SingleKey
"X": "echo hello\\n\n"
$endif
The call to rl_initialize, in tui_initialize_readline, had to be
removed so that .inputrc was not read too early. Note that Readline
explicitly documents that this call is not needed.
gdb/ChangeLog
2019-09-18 Tom Tromey <tom@tromey.com>
* NEWS: Add entry.
* tui/tui.c (tui_initialize_readline): Set name of keymap. Do not
call rl_initialize.
(tui_enable): Do not call rl_initialize.
gdb/doc/ChangeLog
2019-09-18 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Editing): Document readline application name.
(TUI Single Key Mode): Document TUI SingleKey keymap name.
This was fixed in commit 272044897e.
2019-09-14 Christian Biesinger <cbiesinger@google.com>
* NEWS: Mention that gdb can now be compiled with Python 3
on Windows.
With this patch, we e.g. get:
[Switching to task 2 "task_list(1)"]
[Current task is 2 "task_list(1)"]
instead of
[Switching to task 2]
[Current task is 2]
The logic to produce the taskno optionally followed
by the task name has been factorized in the task_to_str function.
Task names are output between double quotes in the new messages,
similarly to what GDB does for thread names.
However, no quotes are put around task names in 'info tasks' Name column.
This was discussed with Tom, that preferred no quotes there, while I
was more in favour of visual consistency.
I discussed with a few more users, which led to (exactly) 50% preferring
quotes and 50% preferring no quotes :).
To arrive to the decision to remove the quotes, the following "killing args"
were used:
* To have quotes or to not have quotes, that is the question; yes
but not *THE* question :).
* If there is not a clear majority that prefers quotes, better to
not disturb the existing user basis for a (somewhat) irrelevant
aspect.
* The opinion of the reviewer has more weight.
So, compared to the previous version, this version remotes the quotes
in 'info tasks'.
It improves the alignement of 'info tasks' output.
With this patch, we get:
(gdb) info task
ID TID P-ID Pri State Name
* 1 555555759030 48 Runnable main_task
2 555555759e30 1 48 Selective Wait mit
(gdb)
instead of
(gdb) info task
ID TID P-ID Pri State Name
* 1 555555759030 48 Runnable main_task
2 555555759e30 1 48 Selective Wait mit
(gdb)
(e.g. the first one properly shows parent and priority under the
correct header).
This is version 4 of the 'task name' patch.
Compared to version 3, the changes are:
output task names between quotes but not in 'info tasks'
gdb/ChangeLog
2019-09-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Announce that Ada task names are now shown at more places,
and between quotes (except in info task output).
* gdb/ada-tasks.c (task_to_str): New function.
(display_current_task_id): Call task_to_str.
(task_command_1): Likewise.
(print_ada_task_info): In non-mi mode, Properly align headers and data
when task-id length is > 9 (9 is the default for a 32 bits CORE_ADDR).
gdb/doc/ChangeLog
2019-09-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Ada Tasks): Tell the task name is printed, update
examples.
gdb/testsuite/ChangeLog
2019-09-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.ada/rdv_wait.exp: Update to new task names.
* gdb.base/task_switch_in_core.exp: Likewise.
* gdb.base/info_sources_base.c: Likewise.
The 'info variables', its alias 'whereis', and 'info functions' all
include non-debug symbols in the output by default. The list of
non-debug symbols can sometimes be quite long, resulting in the
debug symbol based results being scrolled off the screen.
This commit adds a '-n' flag to all of the commands listed above that
excludes the non-debug symbols from the results, leaving just the
debug symbol based results.
gdb/ChangeLog:
* cli/cli-utils.c (info_print_options_defs): Delete.
(make_info_print_options_def_group): Delete.
(extract_info_print_options): Delete.
(info_print_command_completer): Delete.
(info_print_args_help): Add extra parameter, and optionally
include text about -n flag.
* cli/cli-utils.h (struct info_print_options): Delete.
(extract_info_print_options): Delete declaration.
(info_print_command_completer): Delete declaration.
(info_print_args_help): Add extra parameter, extend header
comment.
* python/python.c (gdbpy_rbreak): Pass additional parameter to
search_symbols.
* stack.c (struct info_print_options): New type.
(info_print_options_defs): New file scoped variable.
(make_info_print_options_def_group): New static function.
(info_print_command_completer): New static function.
(info_locals_command): Update to use new local functions.
(info_args_command): Likewise.
(_initialize_stack): Add extra parameter to calls to
info_print_args_help.
* symtab.c (search_symbols): Add extra parameter, use this to
possibly excluse non-debug symbols.
(symtab_symbol_info): Add extra parameter, which is passed on to
search_symbols.
(struct info_print_options): New type.
(info_print_options_defs): New file scoped variable.
(make_info_print_options_def_group): New static function.
(info_print_command_completer): New static function.
(info_variables_command): Update to use local functions, and pass
extra parameter through to symtab_symbol_info.
(info_functions_command): Likewise.
(info_types_command): Pass additional argument through to
symtab_symbol_info.
(rbreak_command): Pass extra argument to search_symbols.
(_initialize_symtab): Add extra arguments for calls to
info_print_args_help, and update help text for 'info variables',
'whereis', and 'info functions' commands.
* symtab.h (search_symbols): Add extra argument to declaration.
* NEWS: Mention new flags.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Add information about the -n flag to
"info variables" and "info functions".
gdb/testsuite/ChangeLog:
* gdb.base/info-fun.exp: Extend to test the -n flag for 'info
functions'. Reindent as needed.
* gdb.base/info-var-f1.c: New file.
* gdb.base/info-var-f2.c: New file.
* gdb.base/info-var.exp: New file.
* gdb.base/info-var.h: New file.
Add a new print_pc which prints both the PC and a new field addr_flags.
Call this wherever the PC is printed in stack.c.
Add a new gdbarch method get_pc_address_flags to obtain the addr_flag
contents. By default returns an empty string, on AArch64 this returns
PAC if the address has been masked in the frame.
Document this in the manual and NEWS file.
gdb/ChangeLog:
* NEWS (Other MI changes): New subsection.
* aarch64-tdep.c (aarch64_get_pc_address_flags): New function.
(aarch64_gdbarch_init): Add aarch64_get_pc_address_flags.
* arch-utils.c (default_get_pc_address_flags): New function.
* arch-utils.h (default_get_pc_address_flags): New declaration.
* gdbarch.sh: Add get_pc_address_flags.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* stack.c (print_pc): New function.
(print_frame_info) (print_frame): Call print_pc.
gdb/doc/ChangeLog:
* gdb.texinfo (AArch64 Pointer Authentication)
(GDB/MI Breakpoint Information) (Frame Information): Document
addr_field.
Armv8.3-a Pointer Authentication causes the function return address to be
obfuscated on entry to some functions. GDB must unmask the link register in
order to produce a backtrace.
The following patch adds markers of [PAC] to the bracktrace, to indicate
which addresses needed unmasking. This includes the backtrace when using MI.
For example, consider the following backtrace:
(gdb) bt
0 0x0000000000400490 in puts@plt ()
1 0x00000000004005dc in foo ("hello") at cbreak-lib.c:6
2 0x0000000000400604 [PAC] in bar () at cbreak-lib.c:12
3 0x0000000000400620 [PAC] in main2 () at cbreak.c:17
4 0x00000000004005b4 in main () at cbreak-3.c:10
The functions in cbreak-lib use pointer auth, which masks the return address
to the previous function, causing the addresses of bar (in the library) and main2
(in the main binary) to require unmasking in order to unwind the backtrace.
An extra bool is added alongside the prev_pc in the frame structure. At the
point at which the link register is unmasked, the AArch64 port calls into frame
to sets the bool. This is the most efficient way of doing it.
The marker is also added to the python frame printer, which is always printed if
set. The marker is not explicitly exposed to the python code.
I expect this will potentially cause issues with some tests in the testsuite
when Armv8.3 pointer authentication is used. This should be fixed up in the
the future once real hardware is available for full testsuite testing.
gdb/ChangeLog:
* NEWS: Expand the Pointer Authentication entry.
* aarch64-tdep.c (aarch64_frame_unmask_address): Rename from this.
(aarch64_frame_unmask_lr): ... to this.
(aarch64_prologue_prev_register, aarch64_dwarf2_prev_register):
Call aarch64_frame_unmask_lr.
* frame.c (struct frame_info): Add "masked" variable.
(frame_set_previous_pc_masked) (frame_get_pc_masked): New functions.
(fprint_frame): Check for masked pc.
* frame.h (frame_set_previous_pc_masked) (frame_get_pc_masked): New
declarations.
* python/py-framefilter.c (py_print_frame): Check for masked pc.
* stack.c (print_frame): Check for masked pc.
gdb/doc/ChangeLog:
* gdb.texinfo (AArch64 Pointer Authentication): New subsection.
Currently we support iteration on blocks; this patch extends that to make
subscript access work as well.
gdb/ChangeLog:
2019-08-05 Christian Biesinger <cbiesinger@google.com>
* NEWS: Mention dictionary access on blocks.
* python/py-block.c (blpy_getitem): New function.
(block_object_as_mapping): New struct.
(block_object_type): Use new struct for tp_as_mapping field.
gdb/doc/ChangeLog:
2019-08-05 Christian Biesinger <cbiesinger@google.com>
* python.texi (Blocks In Python): Document dictionary access on blocks.
gdb/testsuite/ChangeLog:
2019-08-05 Christian Biesinger <cbiesinger@google.com>
* gdb.python/py-block.exp: Test dictionary access on blocks.
