gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-dprintf.exp (mi_expect_dprintf): New procedure,
factore out from mi_continue_dprintf. For call-style dprintfs,
expect dprintf output out of $inferior_spawn_id.
(mi_continue_dprintf): Use mi_expect_dprintf.
* gdb.mi/mi-dprintf.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
Rather than trying to determine where (which spawn id) the inferior
output comes out from, which depends on e.g., remote that supports
file i/o remote protocol extension, vs remote that sends inferior
output through a separate $inferior_spawn_id, vs native debugging,
which sends output through $gdb_spawn_id, vs native debugging with a
test that uses "separate-inferior-tty" (like mi-console.exp does),
always expect inferior output from both $inferior_spawn_id and
$gdb_spawn_id.
mi-console.exp itself already copes with different possible outputs in
a similar way:
# Combine both outputs in a single pattern.
set output "($semihosted_output|$native_output)"
Fixes:
FAIL: gdb.mi/mi-console.exp: Testing console output inferior output (timeout)
when testing against local gdbserver with gdb,noinferiorio removed
from the board file.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* lib/mi-support.exp (mi_inferior_spawn_id): Delete.
(default_mi_gdb_start): Set inferior_spawn_id instead of
mi_inferior_spawn_id. If $inferior_spawn_id is not set, set it to
gdb_spawn_id.
(mi_gdb_test): Always expect inferior output from both
$inferior_spawn_id and $gdb_spawn_id.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.gdb/selftest.exp (test_with_self): Update comment. Use
send_inferior and $inferior_spawn_id.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/call-rt-st.exp (print_struct_call): Split "result"
parameter into two new parameters, "inf_result" and "gdb_result".
Expect inferior output and gdb output from $inferior_spawn_id and
$gdb_spawn_id, respectively. Adjust all callers.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/call-ar-st.exp: Use gdb_test_stdio+multi_line instead
of gdb_test_sequence.
This one is a little more complicated than the other patches in this
series, because of the exit status wrapper handling, requiring a
little state machine.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/a2-run.exp (saw_usage, saw_exit_wrapper)
(saw_spurious_output): Expect inferior output from
$inferior_spawn_id. Use gdb_test_stdio.
This one needed a larger revamp. The issue is that the "info
breakpoints" test at the bottom of the file is broken on targets that
can do both server-side dprintf, and inferior I/O, because then
neither the breakpoint numbers match nor the "already hit N times"
output.
Address that by making the test restart gdb from scratch when
switching between dprintf styles. Test groups are factored into
procedures, and we now use with_test_prefix. While we're changing
test messages, lowercase a few test messages, and then while at it,
modernize a couple things here and there.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/dprintf.exp: Use standard_testfile. Change
prepare_for_testing call.
(srcfile): Don't set.
(restart): New procedure.
(test_dprintf): New procecure, use to continue over dprintfs.
(test_call, test_agent): New procedures, tests moved here.
Restart gdb and recreate dprintfs. Adjust expected output.
This adds a new helper procedure to be used by tests that rely on
stdio.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_stdio): New procedure.
There seems to be no point in relying on stdio here. Simply use
gdb_continue_to_end instead.
(not removing the printf calls, as the .c file is half generated.)
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/restore.exp (restore_tests): Use gdb_continue_to_end.
These tests rely on inferior I/O, but that seems pointless and
unrelated here. Simply remove the printf calls, and don't expect
them.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/call-signal-resume.exp: Remove check for
gdb,noinferiorio. Don't expect "no signal". Use gdb_test.
* gdb.base/unwindonsignal.exp: Likewise.
* gdb.base/call-signals.c (gen_signal): Remove printf call.
* gdb.base/unwindonsignal.c (gen_signal): Likewise.
No point in relying on stdio in this test. Simply run to a breakpoint
instead.
gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.base/siginfo-addr.c (pass): New function.
(handler): Call it iff si_addr is correct.
* gdb.base/siginfo-addr.exp: Remove gdb_skip_stdio_test check.
Set a breakpoint at "pass" and continue to it.
While running some regression tests, I noticed that the two Python
tests mentioned in the $SUBJECT contain non-unique names. This is a
violation of our guidelines:
<https://sourceware.org/gdb/wiki/GDBTestcaseCookbook#Make_sure_test_messages_are_unique>
And also makes things harder for BuildBot. So I hacked both testcases
and made every test name unique. I guess this could be considered an
obvious patch, but I decided to post it before pushing because others
may have different opinions about the names.
OK to apply?
gdb/testsuite/ChangeLog:
2015-07-28 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.python/py-objfile.exp: Make some tests have unique names.
* gdb.python/py-pp-registration.exp: Likewise.
This test fails with --target_board=native-extended-gdbserver because
it misses the usual "disconnect":
(gdb) spawn ../gdbserver/gdbserver --once :2347 /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.server/server-exec-info
Process /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.server/server-exec-info created; pid = 4736
Listening on port 2347
target extended-remote localhost:2347
Already connected to a remote target. Disconnect? (y or n) ^CsQuit
(gdb) et sysroot remote:
Undefined command: "et". Try "help".
(gdb) n
The program is not being run.
(gdb) FAIL: gdb.server/server-exec-info.exp: set sysroot remote: (got interactive prompt)
info files
(gdb) FAIL: gdb.server/server-exec-info.exp: info files
gdb/testsuite/ChangeLog:
2015-07-28 Pedro Alves <palves@redhat.com>
* gdb.server/server-exec-info.exp: Issue a "disconnect".
This patch updates various value handling functions to make them
consider the addressable memory unit size of the current architecture.
This allows to correctly extract and print values on architectures whose
addressable memory unit is not 8 bits.
The patch doesn't cover all the code that would ideally need to be
adjusted, only the code paths that we happen to use, plus a few obvious
ones. Specifically, those areas are not covered by this patch:
- Management of unavailable bits
- Bitfields
- C++ stuff
Regression-tested on x86-64 Ubuntu 14.04. I saw no related test result
change.
gdb/ChangeLog:
* c-valprint.c (c_val_print_array): Consider addressable memory
unit size.
(c_val_print_ptr): Likewise.
(c_val_print_int): Likewise.
* findvar.c (read_frame_register_value): Likewise.
* valarith.c (find_size_for_pointer_math): Likewise.
(value_ptrdiff): Likewise.
(value_subscripted_rvalue): Likewise.
* valops.c (read_value_memory): Likewise (and rename variables).
(value_assign): Likewise.
(value_repeat): Likewise.
(value_array): Likewise.
(value_slice): Likewise.
* valprint.c (generic_val_print_ptr): Likewise.
(generic_val_print_enum): Likewise.
(generic_val_print_bool): Likewise.
(generic_val_print_int): Likewise.
(generic_val_print_char): Likewise.
(generic_val_print_float): Likewise.
(generic_val_print_decfloat): Likewise.
(generic_val_print_complex): Likewise.
(val_print_scalar_formatted): Likewise.
(val_print_array_elements): Likewise.
* value.c (set_value_parent): Likewise.
(value_contents_copy_raw): Likewise.
(set_internalvar_component): Likewise.
(value_primitive_field): Likewise.
(value_fetch_lazy): Likewise.
* value.h (read_value_memory): Update comment.
Similar to get_type_arch, used to get the gdbarch associated to a
struct value.
gdb/ChangeLog:
* value.c (get_value_arch): New function.
* value.h (get_value_arch): New declaration.
This patch tries to clean up a bit the blur around the length field in
struct type, regarding its use with architectures with non-8-bits
addressable memory. It clarifies that the field is expressed in host
bytes, which is what is the closest to the current reality.
It also introduces a new function to get the length of the type in
target addressable memory units.
gdb/ChangeLog:
* gdbtypes.c (type_length_units): New function.
* gdbtypes.h (type_length_units): New declaration.
(struct type) <length>: Update comment.
Commit 23283c1b changed the layout of some bss style sections on
powerpc64, but neglected to add a page gap before the third PT_LOAD
segment created by this reording. Without a page gap we get two
PT_LOAD headers that overlap by one page in memory. That shouldn't be
allowed because the dynamic loader will load garbage from the first
page of the last segment over the last page of the previous segment.
bfd/
* elf.c (_bfd_elf_map_sections_to_segments): Do not make a new
segment for loaded sections after nonloaded sections if the
sections are on the same page.
ld/testsuite/
* ld-powerpc/elfv2so.d: Update
This should fix some build errors seen on AIX, MinGW, and possibly other
non-GNU systems too due to missing asprintf().
bfd/
* configure.in: Add asprintf and vasprintf to AC_CHECK_DECLS.
* config.in, configure: Regenerate.
GCC 6 can be configured to generate PIE by default. But some linker
size tests expect non-PIE. This patch defines NOPIE_CFLAGS to
"-fno-PIE" and NOPIE_LDFLAGS to "-no-pie" if target compiler supports
them. Add $NOPIE_CFLAGS and $NOPIE_LDFLAGS to linker size tests if
needed.
* config/default.exp (NOPIE_CFLAGS): New.
(NOPIE_LDFLAGS): Likewise.
* ld-size/size.exp (run_cc_link_tests): Add $NOPIE_CFLAGS and
$NOPIE_LDFLAGS if needed.
(run_ld_link_exec_tests): Add $NOPIE_CFLAGS if needed.
Using gcc 5.2 (maybe other versions as well), building mi-pending.c gives
these warnings:
./gdb.mi/mi-pending.c: In function ‘thread_func’:
./gdb.mi/mi-pending.c:34:5: warning: ‘return’ with no value, in function returning non-void
return;
^
./gdb.mi/mi-pending.c:38:5: warning: ‘return’ with no value, in function returning non-void
return;
^
gdb_compile_pthreads assumes that the build was successful only if there
is no output. These warnings therefore make gdb_compile_pthreads think
that the build failed, and the test doesn't run.
The easy fix is to replace the "return" with "return NULL". I am
pushing this as obvious.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-pending.c (thread_func): Replace return with return
NULL.
I noticed there was an unexpected pass in mi-watch.exp when running on
x86_64. Doing a bit of archeology shows that the xfail was added by
4a543da. This particular test failed on the MIPS architecture, which
the original contributor was working with. Here is the thread:
https://www.sourceware.org/ml/gdb-patches/2007-09/msg00151.html
Looking at the latest buildbot results for MIPS, it seems that it's also
an unexpected pass on that architecture. Therefore, I see no reason to
leave the xfail in place.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-watch.exp (test_watchpoint_triggering): Remove xfail.
Since GCC 5 folds symbol address comparison, assuming each symbol has a
different address, &foo == &bar is always false for GCC 5. This patch
adds check_ptr_eq if 2 addresses are the same and uses it to check the
address of versined symbol.
PR ld/18718
* ld-elf/check-ptr-eq.c: New file.
* ld-elf/pr18718.c (main): Call check_ptr_eq.
* ld-elf/shared.exp: Add check-ptr-eq.c to PR ld/18718 tests.
GDB currently does not promptly quit after receiving a SIGTERM while no
proper target is active. This is because in handle_sigterm we currently
look at target_can_async_p to determine whether to asynchronously quit
GDB using an async signal handler or to asynchronously quit using the
quit flag. However, target_can_async_p is always false under the dummy
target, so under this target we always use the quit flag and not the
async signal handler to signal that GDB should quit. So GDB won't quit
until a code path that checks the quit flag is executed.
To fix this issue, this patch makes the SIGTERM handler no longer
inspect target_can_async_p, and instead makes the handler
unconditionally set the quit flag _and_ mark the corresponding async
signal handler, so that if the target is async (or if it's the dummy
target) then we will likely quit through the async signal handler, and
if it's not async then we will likely quit through the quit flag. This
redundant approach is similar to how we handle SIGINT.
gdb/ChangeLog:
* event-top.c (handle_sigterm): Don't inspect
target_can_async_p. Always set the quit flag and always mark
the async signal handler.
gdb/testsuite/ChangeLog:
* gdb.base/gdb-sigterm-2.exp: New test.
Pedro Alves
Hans-Peter Nilsson
GDB Administrator
Sergio Durigan Junior
Simon Marchi
Robert Suchanek
Alan Modra
Iain Buclaw
H.J. Lu
Patrick Palka